Hey all, I have searched and searched but can't seem to find anything. Tried removing carrier iq the wrong way, just removed the files from the system, caused a boot loop, I'm rooted but don't have a custom recovery installed, can someone direct me to the correct file to flash by Odin to install a custom recovery? That way I can reinstall / move the files back to where they were? Will this work? Thanks a lot! Jeremy
There is no custom recovery for the AT&T Note 3. You said you're on 4.4.2, correct? If so, you'll have to use the MLG restore (see the link in my signature for a guide) or go to a Samsung Experience Center at your local Best Buy and have them reflash your phone.
Thanks, that's what I was thinking. And as far as best buy, I've tried before and the guy there said flashing a rooted phone will brick it and he absolutely would not do it so... And that's the only best buy around so...
jeremyds45 said:
Thanks, that's what I was thinking. And as far as best buy, I've tried before and the guy there said flashing a rooted phone will brick it and he absolutely would not do it so... And that's the only best buy around so...
Click to expand...
Click to collapse
I took my rooted phone to Best Buy when it was on MJ5 in order to update to OTA 4.4 when it was released, and it worked just fine. Maybe something changed then.
jeremyds45 said:
Thanks, that's what I was thinking. And as far as best buy, I've tried before and the guy there said flashing a rooted phone will brick it and he absolutely would not do it so... And that's the only best buy around so...
Click to expand...
Click to collapse
That guy is full of ****.
SpikeyPsyche said:
That guy is full of ****.
Click to expand...
Click to collapse
Yeah what I was thinking, he doesn't know what he's talking about pretty much, I didn't want to even go up there and try because of the lack of knowledge. But now I do want to flash my phone to nc2 stock and go from there. Are we sure that I can? I'm running the flashed method of the mj5 itself, no nc2 kernel or anything, just the flashed mj5 from Carl's post.
jeremyds45 said:
Yeah what I was thinking, he doesn't know what he's talking about pretty much, I didn't want to even go up there and try because of the lack of knowledge. But now I do want to flash my phone to nc2 stock and go from there. Are we sure that I can? I'm running the flashed method of the mj5 itself, no nc2 kernel or anything, just the flashed mj5 from Carl's post.
Click to expand...
Click to collapse
thats MGL with A3 bootloader, if you install that then you will not have any trace of Root. You can do a factory reset first and then install that odin install, then go to AT&T if thats your carrier and they may do more for you than best buy.
Or do this if you want official nc2 4.4.2 http://forum.xda-developers.com/showthread.php?t=2701062
jerrycoffman45 said:
Or do this if you want official nc2 4.4.2 http://forum.xda-developers.com/showthread.php?t=2701062
Click to expand...
Click to collapse
thats only good if you have the A2 older bootloader, I think jeremyds45 took the A3 bootloader, to my understanding
That's what he has he said he flashed mj5
---------- Post added at 08:32 PM ---------- Previous post was at 08:29 PM ----------
Now if he has mlg I would suggest he use your nc2 thread in development
If anyone is interested in the future, best buy can indeed flash the official NC2 4.4.2 kitkat to your note 3 as long as you're not on verizon, rooted, or have tripped knox, have a custom rom or the like. When i went in this time i actually spoke to someone who knew something and hooked me up, samsung rep, plugged it in to their computer, downloaded the software, rebooted and all was back to normal. Just like an official ota update, didn't lose any of my files, settings anything. So we're back, and now rooted and rollin.
So basically anyone who installed safestrap and doesn't have a working backup is out of luck.
440bro said:
So basically anyone who installed safestrap and doesn't have a working backup is out of luck.
Click to expand...
Click to collapse
If you want to go back to stock 4.4.2, you can flash by odin the leaked tar, which will remove root, and everything, then go to best buy have them flash the nc2 official, then start from scratch there, with rooting and safestrap etc.
440bro said:
So basically anyone who installed safestrap and doesn't have a working backup is out of luck.
Click to expand...
Click to collapse
Can't you just uninstall safestrap and delete any root files off the internal SD card?
Sent from my SM-N900A using XDA Free mobile app
Related
I was using Alliance Rom and today while rebooting got stock at the bootscreen, lost safestrap also. only can go to stock recovery or download mode. can anyone knows how to flash an original image?\
Thanks.
caguas56 said:
I was using Alliance Rom and today while rebooting got stuck at the bootscreen, lost safestrap also. only can go to stock recovery or download mode. can anyone knows how to flash an original image?\o
Thanks.
Click to expand...
Click to collapse
I've had the same problems and asked the same question. There is NO an official stock KitKat image in existence. I went to BestBuy and Samsung guy reflashed my phone to the original state. Just go over there.
jondoe27 said:
I've had the same problems and asked the same question. There is NO an official stock KitKat image in existence. I went to BestBuy and Samsung guy reflashed my phone to the original state. Just go over there.
Click to expand...
Click to collapse
Thanks, will do.
caguas56 said:
Thanks, will do.
Click to expand...
Click to collapse
I done it about an hour ago. Bring the phone to them as is. Tell them the update has failed. Go now.
jondoe27 said:
I done it about an hour ago. Bring the phone to them as is. Tell them the update has failed. Go now.
Click to expand...
Click to collapse
service denied due to the phone not purchase there :crying:
caguas56 said:
service denied due to the phone not purchase there :crying:
Click to expand...
Click to collapse
Do this. It worked for me.
http://forum.xda-developers.com/showthread.php?t=2703006
Face_Plant said:
Do this. It worked for me.
http://forum.xda-developers.com/showthread.php?t=2703006
Click to expand...
Click to collapse
I have the old A2 bootloader and not the A3. the thread said it could damage the phone. can I still use it???????????
caguas56 said:
service denied due to the phone not purchase there :crying:
Click to expand...
Click to collapse
It doesn't matter. You should ask for a "Samsung experience" person and not Bestbuy rep. This is a Samsung service. I didn't buy my from BestBuy ether. Go to another one (in Arlington or Irving). My phone isn't even on AT&T network. I'm with T-Mobile. They have a special Samsung kiosk in the middle of the store just for that.
caguas56 said:
I have the old A2 bootloader and not the A3. the thread said it could damage the phone. can I still use it???????????
Click to expand...
Click to collapse
If you have the A2 bootloader then you can do the MJ5 restore:
http://forum.xda-developers.com/showthread.php?t=2559715
caguas56 said:
I have the old A2 bootloader and not the A3. the thread said it could damage the phone. can I still use it???????????
Click to expand...
Click to collapse
Ok. Don't go to the store anymore if you want to keep A2 and MJ5. LOL They only flash a latest NC2 with A3.
---------- Post added at 02:29 AM ---------- Previous post was at 02:23 AM ----------
Face_Plant said:
If you have the A2 bootloader then you can do the MJ5 restore:
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
But he will loose JB He probably wants to keep it with A2 and MJ5. Is there a link to a JB version?
Probably this one:
" [12/29] Restore for MJ5 --Doesn't trip Knox and optionally provides root--"
http://forum.xda-developers.com/showthread.php?t=2559715
jondoe27 said:
Ok. Don't go to the store anymore if you want to keep A2 and MJ5. LOL They only flash a latest NC2 with A3.
I finally fix the phone using these procedure "http://forum.xda-developers.com/showthread.php?t=2703006".
Thank you carl1961. and for you jondoe27 (just kidding)
Click to expand...
Click to collapse
jondoe27 said:
But he will loose JB He probably wants to keep it with A2 and MJ5. Is there a link to a JB version?
Click to expand...
Click to collapse
You won't lose Jellybean or the A2 bootloader by doing the MJ5 restore. MJ5 is Jellybean, not KitKat.
If you want to keep Jellybean/A2 bootloader follow the second guide I posted, not the first one.
Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.
timmytron said:
Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.
Click to expand...
Click to collapse
Oh god are you on the US version (SGH-I537)? If you're on the international version (I9295) ignore this post but otherwise, you need to read and take in my short rant. Trust me I wish this weren't the case, but it is, and it's important:
The Galaxy S4 Active i537 has a locked bootloader. There is no way around this, no ifs ands or buts. You simply cannot flash custom ROMs or recoveries. That's it, end of story as far as CM, CWM, AOSP and such things are concerned. That being said there is a sort of recovery called SafeStrap which you can use to make nandroid backups, flash mods and STOCK-BASED roms, but it's not a true custom recovery in the sense that we had been used to, because of this locked bootloader nightmare.
OK so I think you're gonna want to check out this thread. It's all about how to install any firmware from download mode, I think you're gonna have to go with NE3 or NH3.
Let me reiterate. NO CUSTOM ROMS. NO CWM. No Paranoid, no cyanogenmod, no AOSP, no crossing go before going directly to jail. Sorry for the stupid joke but seriously, you have got to keep your phone on stock-based roms (of which there are unfortunately few).
Firmware download links
timmytron said:
Okay, so I finally decided to ditch AT&T and go full Paranoid (This is not my first flashing attempt with Android devices). Got the latest version, etc. Load into BootStrap and wipe everything. Go to install PA and for some reason I had neglected to tell my build.prop (ro.product.device/name) is supposed to be "jactivelteatt"/"jactivelteuc" and not "SN-M9009". So when I started the flash process, immediate error and now I'm stuck with a phone with no OS or bootloader and can not, for the life of me, find a ROM to flash with .MD5 or .TAR that will work with ODIN. I did find "Oneclick_I537UCUAMF1" that gets all the way to the end and fails. Tried multiple times with multiple cables.
Please if anyone has any idea's, please help.
Click to expand...
Click to collapse
What phone do you have (i537 or i9295) and what version of firmware were you on?
Devo7v said:
What phone do you have (i537 or i9295) and what version of firmware were you on?
Click to expand...
Click to collapse
i537 and second to last, I537UCUCNE3
Okay, :laugh: I'm back. FINALLY found some MD5 files that loaded. In the process of updating and putting things back they way they were. Thank you to all who viewed/helped!
Is there a way to mark this as "Resolved"?
Web browser login, edit, advanced.
Add "solved" to title?
same problem with my i537, need help
timmytron said:
Okay, :laugh: I'm back. FINALLY found some MD5 files that loaded. In the process of updating and putting things back they way they were. Thank you to all who viewed/helped!
Is there a way to mark this as "Resolved"?
Click to expand...
Click to collapse
Need help, having the same problem
baddhabbitz88 said:
Need help, having the same problem
Click to expand...
Click to collapse
Have you used ODIN before?
i537 Stuck in download mode
timmytron said:
Have you used ODIN before?
Click to expand...
Click to collapse
yes I have use odin but I think I have the same issue you did, need to know where to get the files .
baddhabbitz88 said:
yes I have use odin but I think I have the same issue you did, need to know where to get the files .
Click to expand...
Click to collapse
Okay. Well I'm not sure where I got the files either. What I'm going to do is upload them (please do keep in mind that it's a huge file) to my Drive account and I will link it here when complete. You are on the AT&T i537 version?
baddhabbitz88 said:
yes I have use odin but I think I have the same issue you did, need to know where to get the files .
Click to expand...
Click to collapse
Did you get my PM?
timmytron said:
Okay. Well I'm not sure where I got the files either. What I'm going to do is upload them (please do keep in mind that it's a huge file) to my Drive account and I will link it here when complete. You are on the AT&T i537 version?
Click to expand...
Click to collapse
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.
baddhabbitz88 said:
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.
Click to expand...
Click to collapse
Well AT&T decided to completely lock us out on this particular version on this particular phone. At least we have *ROOT*.
baddhabbitz88 said:
Yes, the at&t version i537 is the one I'm. Found some files this morning and run them in Odin but now back at bootloop. I'll check your files and see whats up on that end. It sucks because have not done anything to this phone unlike my other ones and this crap starts with this one on its own.
Click to expand...
Click to collapse
You need to make sure you are flashing a version that is the same or more recent than the version you are currently on. You cannot downgrade your firmware or else you'll end up with a bootloop.
Devo7v said:
You need to make sure you are flashing a version that is the same or more recent than the version you are currently on. You cannot downgrade your firmware or else you'll end up with a bootloop.
Click to expand...
Click to collapse
k will try to find a more updated version but that is part of the problem is locating the firmware I need + this started doing it on its own and really never dug into it to no which firmware was on it other than rooted months ago with towelroot
---------- Post added at 09:36 PM ---------- Previous post was at 09:04 PM ----------
timmytron said:
Did you get my PM?
Click to expand...
Click to collapse
yeah I got it thanks but it didn't work still digging
baddhabbitz88 said:
k will try to find a more updated version but that is part of the problem is locating the firmware I need + this started doing it on its own and really never dug into it to no which firmware was on it other than rooted months ago with towelroot
---------- Post added at 09:36 PM ---------- Previous post was at 09:04 PM ----------
yeah I got it thanks but it didn't work still digging
Click to expand...
Click to collapse
Always check the stickies.
http://forum.xda-developers.com/showthread.php?t=2892445
Here is my presentiment that I've posted elsewhere
My phone was working just fine this morning but after updating a few apps through Google Play my phone started throwing up messages that gapps process was continuously crashing.
I then restarted the phone and it would not get to the AT&T startup. I have since flashed the OC1 kernel through SafeStrap but now the phone will not leave the AT&T startup logo.
Any ideas for what I can do? I have an older backup but not on 5.0 like I should. If need be I'll be going through the entire reinstallation process of 5.0 again.
EDIT: Just realized that I have a bigger problem now since I cannot access SafeStrap Recovery.
Click to expand...
Click to collapse
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
orangetag001 said:
Here is my presentiment that I've posted elsewhere
I need some help with ODIN to get it back to stock. As you can see, I cannot get to SafeStrap anymore. Would it be alright to ODIN to Lollipop or do i need to go to 4.4.4? Anything I need to keep in mind before doing this? I just need to get to SafeStrap and I can get to some backups that I have.
Click to expand...
Click to collapse
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
Thanks a ton for the reply! I appreciate it immensely.
I'll go through those steps tonight and report back.
Rooted i747 said:
You need to Odin flash the NC2 Kernel to get Safestrap to work http://forum.xda-developers.com/attachment.php?attachmentid=2800888&stc=1&d=1402892555 then you should be able to wipe and install one of your backups. OR if you want to Odin to Lollipop http://forum.xda-developers.com/note-3-att/general/update-procedure-lollipop-5-0-oc1-t3063760. :good:
Click to expand...
Click to collapse
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
orangetag001 said:
So I have the kernel you linked downloaded and unzipped. Within Odin 3.10 do I want to place that md5 file under the "Re-Partition" entry?
Click to expand...
Click to collapse
Place it in the AP slot.
Rooted i747 said:
Place it in the AP slot.
Click to expand...
Click to collapse
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
orangetag001 said:
Just to be safe. This look correct? I have my computer in Japanese locale so that's why the /'s turn out that way
Click to expand...
Click to collapse
Looks good!:good:
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
YOU ARE THE MAN, MAN! Booted into it right away after it was finished!
Rooted i747 said:
Looks good!:good:
Click to expand...
Click to collapse
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
orangetag001 said:
I know you're probably sick of me posting but would I have to ODIN flash a different kernel to get Safestrap access on Lollipop? For some reason once I updated the startup prompt for Safestrap disappeared.
Click to expand...
Click to collapse
Yes you would have to flash the NC2 Kernel then after you are done with Safestrap you need to flash the OC1 Kernel. To access Safestrap without Odin you would need to install the NC2 Flasher from here http://forum.xda-developers.com/note-3-att/development/nc2-flasher-app-unsafe-t2989141/ plus you need the two (2) files from here http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471 Thanks @benwaffle and Thanks @carl1961.
Without Odin https://youtu.be/yIjb0AiZOd4
---------- Post added at 03:20 PM ---------- Previous post was at 03:16 PM ----------
Without Odin https://youtu.be/yIjb0AiZOd4
I found that you can use kingroot to root the factory test firmware for the SM-S903VL
This is the only root method I know and I belive it is the first for the SM-S903VL
The factory firmware has drawbacks, no text calling or downloads or play store.
If anyone can find a way to make this better and actually be able to use the play store phone and texting let us know.
MAKE SURE YOU BACK UP EVERYTHING BEFORE YOU DO THIS
Downgrade and root files found on my drive...
https://drive.google.com/open?id=0B4954IfsDiYKendnaWN1cGZ2Snc
Use odin to flash and Kingroot to root, may take a few tries.
If you are done and need to flash back to stock firmware flash these files with odin...
https://drive.google.com/open?id=0B4954IfsDiYKUmkyZkNIMVhrOUk
Downloading files. Will confirm asap. Thanks!
Definitely works. Root verified. I'm going to stay here and mess around for awhile and see what I can get away with. I'm far from any kind of expert but this seems like a good sign.
omgitsMATT said:
Definitely works. Root verified. I'm going to stay here and mess around for awhile and see what I can get away with. I'm far from any kind of expert but this seems like a good sign.
Click to expand...
Click to collapse
I played with it for awhile, seems the bootloader is locked so that explains not being able to flash a custom recovery. I can't wait till development takes off.
mortj19 said:
I played with it for awhile, seems the bootloader is locked so that explains not being able to flash a custom recovery. I can't wait till development takes off.
Click to expand...
Click to collapse
I flashed a custom recovery used from one of the other S5 phones but it kept booting into a page that said take it to a Verizon employee. I assume that's because of the bootloader being locked. I installed Flashify with an apk and used that to flash.
omgitsMATT said:
I flashed a custom recovery used from one of the other S5 phones but it kept booting into a page that said take it to a Verizon employee. I assume that's because of the bootloader being locked. I installed Flashify with an apk and used that to flash.
Click to expand...
Click to collapse
flashify to flash what? sorry lol i got excited please tell me you found how to flash something that works
mortj19 said:
flashify to flash what? sorry lol i got excited please tell me you found how to flash something that works
Click to expand...
Click to collapse
I used Flashify to flash a custom recovery image, TWRP. It worked but the device wouldn't boot into the recovery image or even back into the operating system anymore. It went straight to a page telling me to take my phone to Verizon store so Verizon could fix my phone. I tripped something.
I just opened Odin and reflashed 4.4.2 and kept messing around, that fixed my phone.
Sorry, didn't mean to get your hopes up.
omgitsMATT said:
I used Flashify to flash a custom recovery image, TWRP. It worked but the device wouldn't boot into the recovery image or even back into the operating system anymore. It went straight to a page telling me to take my phone to Verizon store so Verizon could fix my phone. I tripped something.
I just opened Odin and reflashed 4.4.2 and kept messing around, that fixed my phone.
Sorry, didn't mean to get your hopes up.
Click to expand...
Click to collapse
aw poop, seems we need someone to make a safestrap or bootloader unlock method.. I wish we didn't have to fight to get root and recovery control...
mortj19 said:
aw poop, seems we need someone to make a safestrap or bootloader unlock method.. I wish we didn't have to fight to get root and recovery control...
Click to expand...
Click to collapse
I think you finding this method mentioned in this thread on the original post is a real winner. I think it might be the answer for someone to come in and start developing. *fingers crossed*
omgitsMATT said:
I think you finding this method mentioned in this thread on the original post is a real winner. I think it might be the answer for someone to come in and start developing. *fingers crossed*
Click to expand...
Click to collapse
Hopefully... It took forever to find the firmware files and I only just happened to investigate the factory test files and noticed it was 4.4.2 and decided to try out different one click roots for the heck of it...
mortj19 said:
I found that you can use kingroot to root the factory test firmware for the SM-S903VL
This is the only root method I know and I belive it is the first for the SM-S903VL
The factory firmware has drawbacks, no text calling or downloads or play store.
If anyone can find a way to make this better and actually be able to use the play store phone and texting let us know.
MAKE SURE YOU BACK UP EVERYTHING BEFORE YOU DO THIS
Downgrade and root files found on my drive...
https://drive.google.com/open?id=0B4954IfsDiYKendnaWN1cGZ2Snc
Use odin to flash and Kingroot to root, may take a few tries.
If you are done and need to flash back to stock firmware flash these files with odin...
https://drive.google.com/open?id=0B4954IfsDiYKUmkyZkNIMVhrOUk
Click to expand...
Click to collapse
Where the hell did you find the stock 6.0.1 firmware?! Please tell me because I want to see if it has other "weird" Samsung firmware like s975L
parrotgeek1 said:
Where the hell did you find the stock 6.0.1 firmware?! Please tell me because I want to see if it has other "weird" Samsung firmware like s975L
Click to expand...
Click to collapse
Easy-firmware
mortj19 said:
Easy-firmware
Click to expand...
Click to collapse
Thanks!
I don't have this phone, but can you send me some screenshots of what apps are installed, and a screenshot of About phone menu, so that I can try to help with play store and phone/text?
edit: never mind
parrotgeek1 said:
edit: never mind
Click to expand...
Click to collapse
You edited to quick, lol.
I'm looking up the stuff you asked now. Will have to reflash everything, bbiab
Im having difficulties waiting patiently for development. .....
Off topic: I was a burrito once
parrotgeek1 said:
Thanks!
I don't have this phone, but can you send me some screenshots of what apps are installed, and a screenshot of About phone menu, so that I can try to help with play store and phone/text?
Click to expand...
Click to collapse
I wasn't entirely sure what you wanted when it concerned Apps so I just went to settings and took screenshots of everything under Settings > Device > Apps
Let me know if that's everything you need so I can put 6.0.1 back on before I head to work so I have a stable phone.
omgitsMATT said:
I wasn't entirely sure what you wanted when it concerned Apps so I just went to settings and took screenshots of everything under Settings > Device > Apps
Click to expand...
Click to collapse
thanks, also need lock screen, home screen, notifications
I want to see if the aosp apks could work
and thats it
---------- Post added at 04:22 PM ---------- Previous post was at 04:16 PM ----------
mortj19 said:
Im having difficulties waiting patiently for development. .....
Off topic: I was a burrito once
Click to expand...
Click to collapse
what
parrotgeek1 said:
thanks, also need lock screen, home screen, notifications
I want to see if the aosp apks could work
and thats it
---------- Post added at 04:22 PM ---------- Previous post was at 04:16 PM ----------
what
Click to expand...
Click to collapse
I was able to get the home screen and notifications but there is this black transparent thing with yellow text that is getting in the way of everything, you can see it in the screenshots. Also because this is Factory Mode apparently there is no lock screen? I've rooted again and am trying to see if I can turn it off for you but here is what I got so far
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Zeuszoos said:
First, thank you for responding!
I used that page on my last Note 4 (it died, hardware failure), after I tried MM but hated the Ext SD handling and so I went back down to the T2 KK ROM on that page and it worked fine (I installed the entire ROM). But my replacement Note 4 that just arrived already had MM as I said and updated to a Build # I haven't seen.
But if you look at the Build #, T-Mobile seems to have (via the Updates) turned the phone into a "N910T3" instead of a "N910T". Weird! Especially since I'm with MetroPCS. Hahaha! They're owned by T-Mobile though, use the same Towers, etc..
Anyway, I'd like to try and stick with MM this time around.
But you did hit one of my grey areas.
Let me see if I understand you correctly... If I were to Flash just the KK BL, my phone would/would not continue to Boot into Marshmallow as it is now, if I Flashed nothing but that?
Or am I correct in saying that your method would mean taking the phone back, so that it would be running KitKat and then going back up to Marshmallow using a different ROM that TWRP will be able to go onto?
The reason I'm fuzzy, is because I've never Flashed just a BootLoader, so I'm not sure what would happen if I Flash just the KK BootLoader onto an MM ROM and Reboot???
Thank you again for your time!
Click to expand...
Click to collapse
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Zeuszoos said:
Is this a method you've tried B4?
I'll check out that thread and see if they've got an MM Modem too.
Isn't that the "EFS" part of a ROM? If so, there are EFS Backup apps. But they may require Root though.
TTYL
Click to expand...
Click to collapse
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
dottyparent said:
This method will turn your phone temporarily to a t2, of which a mm Rom will not boot. Since your goal is to have TWRP on a MM Rom, I would do the following:
1. Flash the t2 KK bootloader.
2. Find your appropriate KK bootloader (ie if you have a 910t find a 910t bootloader) and flash it
3. Flash TWRP
4. Flash a MM bootloader and modem.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
There is an MM ROM that is Rooted and has TWRP built in, but I don't know if it would Flash over this with Odin or not
I am also considering trying the entire KK T2 ROM again to go down to KK and then Flashing that MM ROM.
It has both Odexed & DeOdexed. If I remember right, DeOdexed is the better choice, right?
Thanks for all your time and help!
Dave
Hi,
You know what's sad, is that if I could somehow Roog it without TWRP, then I could use the way awesome "Flashify" app to try to get TWRP on this phone! <lol>
Dave
dottyparent said:
From what I know, the bootloader isn't locked but I recommend installing a KitKat bootloader Using this thread
https://forum.xda-developers.com/no...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
From there you can install TWRP and/or update to qg1, qe2, or older.
Click to expand...
Click to collapse
dottyparent said:
Yes I have tried this. I changed my phone from a trip to a t2 and back again.
Click to expand...
Click to collapse
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Zeuszoos said:
Could you please tell me where the files are that you used, so that I can have the exact same ones to work with? I looked at the link you provided, but I couldn't find just the BootLoader in it. I saw where someone requested just the BootLoader and Modem (you?) and "Trex888" said he would upload them right away and provide a link, but I did not see one ever posted. Just the link for the entire ROM.
Btw, in Odin, if you're Flashing only the BootLoader, do you use the "BL" button instead of the "AP" (formerly "PDA") button? What about just the Modem (thru Recovery?)?
I just tried Flashing the entire T2 KK ROM that I had used to go back from MM to KK on my first Note 4, but this one wouldn't take that either. It immediately said "FAIL".
I'm sorry if I'm a pain. It's just that I'm disabled and constantly laying on my side, so a laptop is out for regular use and so this phone is my main and only communication with the outside world. What I'm saying is that it's not a hobby phone and I have to get it right, because (see below). So I don't want to Flash something that may not do it, so I want to exactly match what you did.
You see, I can only sit up to Flash from Odin on my Windows computer with my phone cabled to it for just so long because of my condition.
Not your problem, I know. But I'm explaining it to you so that you can understand that I'm not just trying to be lazy. But instead, I need to make sure I do exactly what worked for you, with exactly those files, because if something goes wrong, it could take me days of short time computer access due to my situation (too much overwhelming pain) to figure it out and get it (hopefully) fixed. So you can see the importance, no doubt.
This phone right now (see Build #) says it's a T3, but whatever works.
Right now, it's without Recovery so I can't Root it, so I can't get Write access to my Ext SD, etc.. I need to Root!
Also, this T3 MM ROM is having issues with the Display. Sometimes it'll get all chopped up and I have to Reboot.
So anyway, I need to get this done and I would very much appreciate your further help!
Thank You!!!
Dave
Click to expand...
Click to collapse
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
dottyparent said:
Okay. Here is what I did exactly.
Download my Files here: https://1drv.ms/f/s!AJEa3D0cBAhIbQ
Stock 910T files here https://androidfilehost.com/?w=files&flid=20602
i guess if you need any other stock files sammobile works.
This will reset your phone!
1) Odin flash the AOG1 file. this turns the phone into a t2 phone.
2) Odin the ANK4 rom. this returns the phone to a 910t.
3) Boot into the ANK4 rom and download the MM update. This should land you on the first MM update, EPE3
4) Flash TWRP, thourgh AP, which should work. Might as well flash superSU or magisk.
At this point i would wipe everything and install a custom rom, but you could update to a newer boot loader and modem using the BL and CP buttons, respectively.
hope this helps
Click to expand...
Click to collapse
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Zeuszoos said:
Thank you for responding!
The OG1 is the T2 ROM that I had just tried and reported that unlike my previous Note 4, it would not Flash on this one to turn it into a KK T2. I also tried the other 2 ROMS to no avail.
I think it's because this one says it's a T3.
Thanks,
Dave
Click to expand...
Click to collapse
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
No, I'm sorry, but you have to give me the answer.
All seriousness aside, I depreciate all your effort.
I can only think of one thing left to try... Go to Sammy's site and get the Lollipop 5.1.1 ROM and see what happens. It can't hurt to try, right?
I'll let ya know what happens and thank you again!
Happy Thanksgiving!
Dave
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Zeuszoos said:
Guess what? I decided to take a picture of my phone's screen after it Failed to let me Flash anything at all in Odin. I tried TWRP again and this time read what my phone responds with and it says the following:
Custom Binary (Recovery) Blocked By FRP LOCK
Does that mean anything to you?
TTYL
Click to expand...
Click to collapse
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Zeuszoos said:
Hi,
I just got this phone (same phone I had to replace the one that died)::
Samsung Galaxy (SM-N910T) Note 4 (QualComm)
Marshmallow 6.0.1
It's Unlocked.
Anyway, before I could install TWRP so I could Root it, Android Firmware Updates started coming through. I figured let them install and that way I'd have them. I knew that if I tried to install them after installing TWRP, it would just replace TWRP anyway.
After the last Update, the Build is now...
Build #: MMB29M.N910T3UVU3EQI2
I have tried TWRP 3.0.2.0 & 2.8.7.0 and even PhilZ 6.59.0 but nothing will go on! Odin (latest and tried older one) starts to Flash it, it says "Recovery" and then it says, "FAIL".
I'm thinking it's gotta have something to do with the Updates to Marshmallow???
PLEASE HELP! I can't do anything that I need to do without it Rooted and I can't Root it without a Custom Recovery.
Thanks!
Dave
Click to expand...
Click to collapse
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
dottyparent said:
I'm sorry man I did everything that I could think of. I knew that the T3 had a few issues with bootloaders and downgrading and stuff, but wow, i didn't know about these issues. Good luck with trying something else then.
Click to expand...
Click to collapse
ShaDisNX255 said:
That's weird. I updated my N910T to EQI2 with Odin, rooted using CF-Auto-Root for N910T and then flashed TWRP 3.1.1 and I had no problems at all
Click to expand...
Click to collapse
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
That's because I have a n910t not a t3
Zeuszoos said:
But you updated to it. From KK?
KK doesn't have it and it's not in downloadable ROMS.
But if MM is already on the phone (mine), then it has FRP. See my other response.
TTYL
Click to expand...
Click to collapse
I upgraded from LL. The device was running 5.0.1 and now has 6.0.1
dottyparent said:
Well I searched around XDA and it seems to be a problem exclusive to the T3. Try going to settings -> security and see if there is a option to disable resetting protection. Or see if there is a way to disable OEM locking. However it's probably not there. The only successful thread I found was this
https://forum.xda-developers.com/note-4/help/note-4-t-mobile-sm-n910t3-custom-binary-t3346840
---------- Post added at 07:28 PM ---------- Previous post was at 07:24 PM ----------
If all else doesn't work, perhaps you could repartition your phone. You need a pit file and a few ROMs
Click to expand...
Click to collapse
Thank you for looking! I found out what it is.
It's "Factory Reset Protection" (FRP)
What it does, is keep someone else from Factory Resseting your phone if they steal it. When they reset it, during setup, they have to type in the last Google Email and Password that the phone used, before they can set up theirs.
After reading that, I remembered having to put my Google Info in at two separate points and seeing it telling me to "Verify", but I was just blowing right through setup, not reading all of the small print. I mean hey, I had no idea that even existed and was just annoyed that I had to type the same thing twice!
It will only be found on phones that already have Lollipop and up on them out of the box and probably not all of them yet. And you don't have to worry about downloadable ROMS, so those who have phones that started with KitKat, or even early versions of Marshmallow 6.0 or 6.0.1 would not have seen this happen to them. Even those who updated to the same version of Mm that my phone has won't, if they started with KK or an older MM and then updated to it.
Again, this is something that your phone would have "Out of the Box" and the phone (not all) would have at least L on it.
Just FYI, it's not just Samsung, either.
Just FYI, I have confirmed this info. It is a fact.
Once I have an easy to do, working fix, hopefully without having to perform a Factory Reset, I will "Create A Thread" and as normal for me, write clear and easy, step by step (not leaving any out) instructions on how to "Unlock FRP" and then come back here and post a link to the thread. Hopefully this week.
This phone will not beat me!!!
TTYL
Dave