[Q] Samsung Galaxy S I9000 Korean Version aka I9000GSMH - Galaxy S I9000 Q&A, Help & Troubleshooting

hello guys , im pretty new here and i have a issue with one samsung galaxy S I9000 Korean version I9000GSMH.
Well the phone was buyed like this and i wanted to fix the problems theat the phone had. I was a stuck on S i9000 screen and restart again and again etc. but when i discovered theat I9000GSMH was a korean version and the I9000 room is not supported i flashed with the I9000GSMH. repair kit.after flashing with odin and pit and other files. Now when i turn on the device its show a whird screen and don't enter any more on download mode or recovery. how can i fix this phone? please if anybody can help me out i well make a donation . tnks in advance.i attached a photo with the phone.

Related

SGT P1000 Bricked, please help guide me..

I bought a SGT P1000 2nd hand (unlocked from Orange UK) and it was working perfectly. I wanted to change the firmware as I am not keen on the branded orange firmware.
In my past experiences on mobile fone firmwares I am quite good. Anyway every firmware I try and fololw the guides for those firmwares I get always end up not able to boot from the Galaxy Tab Samsung screen.
all installs from Odin3 v1.7 are fine. even the Download logo on galaxy tab shows up but cant allways access back reboot area depending on firmware installed. but can never pass the Galaxy Tab Samsung screen.
I did not get any info from +#12345# <<<<---- i know i may have wrote that wrong) because i never checked i was lazy. so really I have no clue what firware i need to get exactly and any other bits i need.
so if anyone can advice i would be much appreciated my tab is
Samsung galaxy GT-P1000 from Orange PLc UK) Unlocked (2nd Hand)
What is the model of your GT. Check the back of the unit which should start with P1000 then a letter.
Once you have that, then go to samfirmware.com and look for the correct ROM for your model and download.
Download Kies on your computer to make sure drivers are installed and unit is connecting to your PC.
Download Odin 1.7 and follow instructions with downloaded ROM.
Good luck, most of us have been where you are today.
Let me know how it goes
hello fella thanx for the reply..
On the back of the galaxy tab it just says Model: GT-P1000
and on the box it says P1000 PM
I will follow what you said and have a go. thanx fella for the support
I will let you know what happens and be back to check this post in case you
have any further info.
well I have gone to this page fwandroid.htm on that site you suggested
and all i could find is Samsung P1000 / Galaxy Tab
no extra in list which have PM in letters.
I enter the link and it takes me to Europe Samsung P1000 Firmwares.
but also which do i choose cause i have no idea which is the right firmware for me as i see a list combining of for an example
Europe Firmware
P1000XXJH3 #
P1000XXJH8 #
P1000XXJHA ##
P1000XXJI2 ##
P1000XXJI4 ##
P1000XXJI5 ##
My GT is version P1000N so mine corresponds to America Australia Samsung P1000 Firmwares.
What I would do if I were in your situation, I would try to flash version P1000XXJMQ. By mistake I installed it on my device and it never worked because mine is from a different region but I was able to bring it to the correct firmware..
Go ahead and try it. Just make sure you know how to flash with odin, have a full battery and any other questions I'll be glad to see if I can be of any help to you.
By the way, your device appears to be from network carrier Play and from region Poland. You can confirm here samsunglettercode.htm in the site I mentioned earlier.
Good luck!
in the same boat...
im in the same situation...i bought this tab from a friend...he ended up bricking it...he bought it from amazon and it only says GT-P1000...no letter...mine is unlocked as well and doing the same...so lost..how do i find out what
Does the unit even starts? Do you see the samsung logo? Can you go todownload mode?
________________________________
TABLET » Samsung Galaxy Tab P1000N
ROM » Stock P1000N Gingerbread 2.3.3
KERNEL » Stock P1000N Gingerbread
mine does..
i can get mine to download mode and recovery mode...but i get errors in recov...i have another post that is more detailed....http://forum.xda-developers.com/showthread.php?t=1123123...its got pics of the errors...any ideas?
I suggest you guys look into GalaxyTab Android Development forum. There you will find all the information on how to flash, the correct roms for you're unit etc.
Good luck
________________________________
TABLET » Samsung Galaxy Tab P1000N
ROM » Stock P1000N Gingerbread 2.3.3
KERNEL » Stock P1000N Gingerbread

I9000(s) ???

hi all.
I have a samsung galaxy S and its problems. I tried to remove it, but its mainboard I9000 GT (s) and not GT I9000. I also tried using the version of I9000 Stockrom for it but failed. My device of the network ? And what do I do with it now?
Hmmm... if you cannot remove the phone, try to give it to someone else, I'm almost certainly sure that it will not return to you this time
WHAT problem(s) do you have?
WHAT ROM currently you have?
WHAT stock have you tried to flash, and HOW?
WHAT were the symptoms that it was unsuccessful?

Firmwares for Samsung Galaxy S SCL I9003 (GSM)

Hi, couldn´t find anything about this with the Search Engine so I am opening a new Thread.
Someone I know got a Samsung Galaxy S SCL I9003.
Well, the System is kinda bricked. Launcher Forcecloses at Boot and the System Crashes.
So we planned to Reflash the whole thing. But as we can´t get into the System I don´t know the exact modell name. Just what it shows when booting and that is "Samsung Galaxy S SCL I9003"
Now I can´t find any Firmwares for it. Just for the SL I9003. Well, I doubt those aren´t working with the SCL version, am I right?
So where can I get the Firmwares + Odin for this Device. Even better If you did know if SuperOneClick Root works for this Device and if there are any good CustomRoms...
Device is currently on FroYo
PS: Sorry for my bad english, I am no native speaker

[Q] boot loops

hi i have the Samsung I8190N Galaxy S III mini it was running on DMODV6 but i tried to install GT-I8190_enox-reVenge-AMD3-v4.0 on it when i rebooted it comes up with galaxy s 111 mini then turns off vibrates turns on to galaxy s 111 mini turns off and does this none stop..its in a boot loop and i cant get into recovery i can get into download mode and thats where i get messed up can some one help me get my phone back its a uk mobile was on t-mobile till i rooted it. i just dont understand what odin to download and what other files ill need can some one please help me ?
ppm48 said:
hi i have the Samsung I8190N Galaxy S III mini it was running on DMODV6 but i tried to install GT-I8190_enox-reVenge-AMD3-v4.0 on it when i rebooted it comes up with galaxy s 111 mini then turns off vibrates turns on to galaxy s 111 mini turns off and does this none stop..its in a boot loop and i cant get into recovery i can get into download mode and thats where i get messed up can some one help me get my phone back its a uk mobile was on t-mobile till i rooted it. i just dont understand what odin to download and what other files ill need can some one please help me ?
Click to expand...
Click to collapse
you meant you were on EE firmware?
here is stock I8190N UK (EE) firmware http://www.hotfile.com/dl/198742579/7fbd47a/I8190NXXAMB1_I8190NEVRAMB2_EVR.zip.html
use the guide for I8190 in my signature to flash with odin
ok my friend will down load that and then read the thread thank you
all fixed i just want to say a big thanks if it wasnt for guys like samersh72 guys like me would be in such a mess i just want you to know that i along with many others appreciate all your hard work and taking the time to help bless you all
I'm having the same problem but with the Latin version (I8190L). Where do you get firmware files like that? Thanks!
dimatrod said:
I'm having the same problem but with the Latin version (I8190L). Where do you get firmware files like that? Thanks!
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/

[Q] Samsung Galaxy S I9000 gsmh stuck

Hello guys! i have a samsung galaxy s I9000gsmh theat in the past haved the problem with restarting after the S logo,i search and find theat the gsmh is a korean version and tried to flash the room with the original korean version.But now the phone is stuck in a wird korean screen ,its like downloading mode.i search and discover theat on the screen is something like "android is resetting your phone.please wait a minute."please can sombody help me out with this ?tnks in advance and sorry for my poor eng

Categories

Resources