Related
When i power off my phone and plug it in to charge it starts automaticlly, the phone turns on itself
Can some one help me?
What rom are you using?
Sent from Ace on CM 10.1
Can you power it off again or will it reboot and reboot over and over again?
But why charging while switching off...??
Does normal charging works??
I had CM9 when i first realized that it wont power off and charge now i'm using CM10 rom
I can power it off but when i put it on charge or data cable it turns on itself
You asked me while turn it off, i have another problem that's why i want it to turn off, it says that the phone is 100% when i plugged it off the charger and i just open something on the phone it says 93% after on second,i have tried for that many thing charged it 100% delete batterystats but it's the same.
pssrycceho said:
I had CM9 when i first realized that it wont power off and charge now i'm using CM10 rom
I can power it off but when i put it on charge or data cable it turns on itself
You asked me while turn it off, i have another problem that's why i want it to turn off, it says that the phone is 100% when i plugged it off the charger and i just open something on the phone it says 93% after on second,i have tried for that many thing charged it 100% delete batterystats but it's the same.
Click to expand...
Click to collapse
Thats the problem of jumping battery, experienced by all ace users unfortunately.
You can blindly charge for 2and half hours nonstop. (though phone says its charged)
Ok, but there is still the problem of phone when turned off and plugged in it turns itself on
pssrycceho said:
Ok, but there is still the problem of phone when turned off and plugged in it turns itself on
Click to expand...
Click to collapse
R u experienced problem in one specific rom or all roms??
TheBlackWolf said:
R u experienced problem in one specific rom or all roms??
Click to expand...
Click to collapse
I first saw that problem on 9.1 cm now on every rom it,s the same
pssrycceho said:
I first saw that problem on 9.1 cm now on every rom it,s the same
Click to expand...
Click to collapse
Just have a start from beginning.
Flash stock.
Root and install CWM recovery
And again install a custom rom.
This will be a last try.
Should fix all problems.
TheBlackWolf said:
Just have a start from beginning.
Flash stock.
Root and install CWM recovery
And again install a custom rom.
This will be a last try.
Should fix all problems.
Click to expand...
Click to collapse
I will try that later today and will post tnx
U cant charge on cm 9 and cm 10,10.1 while turned off,there is no option for that.
Sent from Ace on CM 10.1
n0p3zz said:
U cant charge on cm 9 and cm 10,10.1 while turned off,there is no option for that.
Sent from Ace on CM 10.1
Click to expand...
Click to collapse
No option ? Lol Connecting your charger plug doesn't need one. It's just a bug in the cm9.1/10 that turns on the phone after connecting the charger with the phone off.
Sent from my GT-S5830 using xda premium
U
n0p3zz said:
U cant charge on cm 9 and cm 10,10.1 while turned off,there is no option for that.
Sent from Ace on CM 10.1
Click to expand...
Click to collapse
Hvala ti Pancevcu Thanks everybody
I have the same problem, when I conect my phone on the charger it says that it has 100% battery, but once I disconect it the battery starts to drop incredibly fast. Than it gets to a point that the phone shuts down than restart, multiple times.
I'm using miui expression 1.3 but it also happens on cm 7.2.
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Press recovery combos when your turning off, see if that works, you might just be holding power too long and it turns on again
No usb at all? If you can connect with adb, you can reboot to recovery that way.
Combo.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Hi, thanks all for your advices. I try em all but with no sucess. Though, something weird happened today. After the battery completely drained I tried charging it with the my regular charger, the cable to the wall one, and the phone vibrated, like it recognized it, but didn't turn on. Just vibrated. So I tried again using my micro USB to PC cable and the phone vibrated again when I plugged in to the USB port, but didn't turn on either, nor the PC recognized the device. Don't know if this is good or bad :S
If you have any more ideas, please let me know.
Thanks!
Unotresocho.
AlexGardunio said:
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Click to expand...
Click to collapse
I'm trying this, but it keeps auto restarting. I'll describe what I'm doing, maybe there's something wrong:
1. Insert the battery.
2. Phone vibrates, I press Vol-/Home/Power and Samsung Galaxy S3 mini shows.
3. Keep pressing the combo and the phone turns off
4. Release the power button
5. Phone vibrates and again shows the Samsung logo and then the CM boot animation
Turn off again and same.
Thanks for the advice!
Hi again, I managed to get to "Odin Mode", the recovery that comes by default with the phone. Don't know why if I had TWRP installed. Does anyone know if it's gonna help me in some way? Remember I can't use a cable
Thanks!
How did you get into "Odin Mode"? Are you sure the cable is not working when the phone is in download mode?
Got into it by doing the button combo, tried several times and it was tricky but finally got it. And yeah I quickly connected to the computer (I have a Macbook but I also try on a PC) neither of them recognized it. Don't know what else to do
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
As far as I know the phone should not vibrate everytime you put battery back. But if you're able to go into odin you should be able to go into recovery (unless volume up key is damaged). But... while in odin... you can go back to stock rom and that should solve lots of your problems mate.
tys0n said:
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
Click to expand...
Click to collapse
Hi tys0n, thanks for your suggestion. I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app. Do you know any other way to get it?
Many thanks!
unotresocho said:
I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app.
Click to expand...
Click to collapse
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
deconectat said:
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
Click to expand...
Click to collapse
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
tys0n said:
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Click to expand...
Click to collapse
Yeah, I keep pushing the buttons combo and it reboots again, it won't start to boot CM, just displays de Samsung logo and reboots. About the second question, I've tried connecting the computer while in Odin mode but it won't recognize it, I haven't tried with Odin itself open because my primary computer is a Macbook and don't have a PC with the Odin installed near to me all the time. Do you think it could recognize the device, despite the fact the whole PC doesnt?
Thanks!
Arrrroz said:
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
Click to expand...
Click to collapse
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
unotresocho said:
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
Click to expand...
Click to collapse
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
I'm starting to thing you aint got a recovery at the moment. I've seen this type of thing before. Problem is, if you can't get odin to work you won't be able to solve it :/
Arrrroz said:
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
Click to expand...
Click to collapse
I have no idea. I didn't fall or anything, it just stopped working one day. I thought it had to do with a "software" thing more than hardware, because I was using CM 10.1 and of course it wasn't official, it had bugs. I actually was trying to go back to CM10 to see if that was the problem but I got stuck here.
Hello folks, i've been experiencing some problems with my S3 mini lately, USB isn't working correctly, i don't know why, i.e: I have my phone connected to computer, everything working fine, charging, mass storage etc... but when i disconnect it, the charging logo and mass storage keeps running .
Same happens when charging it with electricity only, the charging logo gets stuck there, and the phone thinks it's still charging, even if i reboot it, the problem persists, i need to take off the battery everytime that happens so the charging logo dissapears and everything returns to work normally, any ideas on what would be the cause of this ? can't be the ROM, since i had that problem with previous ones too
yes i have same problem can someone helpp us!?!?!? :crying::crying:
SilentScorn said:
Hello folks, i've been experiencing some problems with my S3 mini lately, USB isn't working correctly, i don't know why, i.e: I have my phone connected to computer, everything working fine, charging, mass storage etc... but when i disconnect it, the charging logo and mass storage keeps running .
Same happens when charging it with electricity only, the charging logo gets stuck there, and the phone thinks it's still charging, even if i reboot it, the problem persists, i need to take off the battery everytime that happens so the charging logo dissapears and everything returns to work normally, any ideas on what would be the cause of this ? can't be the ROM, since i had that problem with previous ones too
Click to expand...
Click to collapse
arbinkuqi1 said:
yes i have same problem can someone helpp us!?!?!? :crying::crying:
Click to expand...
Click to collapse
& the million dollar question:laugh: is, with which rom (you forgot to metion)!? I have none of your issues, with CM11
I have an S3 mini which does the same. I already installed several kernels and roms and nothing change...
Did you solve the problem.
thanks
mauam said:
& the million dollar question:laugh: is, with which rom (you forgot to metion)!? I have none of your issues, with CM11
Click to expand...
Click to collapse
It's Maclaw's Carbon ROM, and no i haven't fix it.
SilentScorn said:
It's Maclaw's Carbon ROM, and no i haven't fix it.
Click to expand...
Click to collapse
do you have this problem right after flashing the carbon version with otg support?? i have the same problem but it started to happen after flashing the cm 11 version with otg support--
Hello guys.
last year i posted same question, but i found solution, not actually solution. i have to install custom rom to charge or just use my usb. so when im using custom rom like Resurrection or something my phone charges fine and using USB without shut down. but when im installing firmware / stock rom i cant charge or use USB, phone shuts down by itself after i plug in usb. i dont want to use custom roms cause my phone is laging i want use firmware. what is this? why is this happening. why i cant charge my phone on firmware ? how do i fix this.
My s3 mini GT-I8190N have maclaw's CM ROM (I can't remember which build). After discharge it charge but when I try to turn on it shows samsung logo and boot animation. And then it turn off. i try to turn in recovery and download mode but without reaction. I wish to save some data from internal storage but I'm afraid that phone is dead. Please help.
Ryjek49 said:
My s3 mini GT-I8190N have maclaw's CM ROM (I can't remember which build). After discharge it charge but when I try to turn on it shows samsung logo and boot animation. And then it turn off. i try to turn in recovery and download mode but without reaction. I wish to save some data from internal storage but I'm afraid that phone is dead. Please help.
Click to expand...
Click to collapse
Problem solved
Hi dude. How you fix it, please. I´m experiencing the same problem with Resurrection Remix from NovaFusion, in fact my phone right now is dead. it first reboot with the battery drained, then turn off and now is dead.
Liam2001 said:
Hi dude. How you fix it, please. I´m experiencing the same problem with Resurrection Remix from NovaFusion, in fact my phone right now is dead. it first reboot with the battery drained, then turn off and now is dead.
Click to expand...
Click to collapse
I used another charger and now is working. I think You should contact with novafusion team or users.
Ok, thank you. Right now the phone is on and working, it just turns on, but when it shutdown, i tried to charge it with a huawei charger, if it happens again, i´ll try with another charger, thank you, again.