[Q] Which ROM to install? - Sprint HTC One (M7)

Since the moderator closed my thread without even reading what I wrote, as if a bot or something, let me try again....
Can anyone recommend an Android 4.4x ROM that works rooted, and works with the latest TWRP?
I want all the basic features to work. I read that Viper won't work with the compass with changing the kernel, and Bad Boyz Sprint ONE ROMz won't work with the latest TWRP.
I don't want to install 20 different ROMs and test each when other people already did that already, that's the whole point of the internet.

Sorry but I saw your last thread and he was right to close it. Roms can't be recommended. Isn't a written rule but it's common courtesy. To recommend a Rom is to say that one Rom is better than another. Do you understand what I mean

anotherfakeusername said:
Since the moderator closed my thread without even reading what I wrote, as if a bot or something, let me try again....
Can anyone recommend an Android 4.4x ROM that works rooted, and works with the latest TWRP?
I want all the basic features to work. I read that Viper won't work with the compass with changing the kernel, and Bad Boyz Sprint ONE ROMz won't work with the latest TWRP.
I don't want to install 20 different ROMs and test each when other people already did that already, that's the whole point of the internet.
Click to expand...
Click to collapse
OK, so lets re-cap. You posted this already and were asked not to do so:
BD619 said:
Greetings,
These type of threads are not allowed everyone has their own opinion of what's best/solid.
Best thing to do is read and flash and find out what's best/solid for you.
Thread closed.
Thanks,
BD619
Click to expand...
Click to collapse
Yet here you are posting the same again.
Now you are breaking XDA rule by spamming the forum.
(please take note of rule 7 and now 2.3)
So let me reiterate.
No Best Rom request threads.
Why? You ask.
This is a forum for development
This IS NOT a forum for comparison.
If this thread were open for long enough, you would end up with fighting between users that feel the rom they use is the best.
~Hence, no straight answer
~Hence, you end up trying several
~Hence, you realize, the mod you ignored has much wisdom
so ends the lesson of why we close these threads.
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.

Related

[android] Replace old bootscreen?

Flashed android to my Tilt and I'm stuck with an old bootscreen from a PDAnet rom.
Does anyone have a replacement boot screen that replaces any old one from past roms? Preferably something android related that can be flashed over top of the android rom.
EDITED for specificity...
Flashed kaisimg-320x428-20-01-10
from
[Aug 30th][PDACorner] Ultimate-X2.V11 -23017|M2D|MOTO Home|CHome|Enhanced Version
Moved as not ROM Development..
I'm sure that one of the devs in the android threads can help..
stylez said:
Moved as not ROM Development..
I'm sure that one of the devs in the android threads can help..
Click to expand...
Click to collapse
My question is strictly kaiser flashing related.
SharpieMarker said:
My question is strictly kaiser flashing related.
Click to expand...
Click to collapse
It may be to do with flashing but you have not produced an android or WM build so is not Development... So is general and as stated you could ask in one of the many android dev threads.
stylez said:
It may be to do with flashing but you have not produced an android or WM build so is not Development... So is general and as stated you could ask in one of the many android dev threads.
Click to expand...
Click to collapse
Thanks
10chars
Either way, you just have to search for flash splashscreen and you will get the info you need. Or a trip into the Wiki/sticky area.
ChumleyEX said:
Either way, you just have to search for flash splashscreen and you will get the info you need. Or a trip into the Wiki/sticky area.
Click to expand...
Click to collapse
lol completely passed my mind that it still runs on the win-mo backbone
stylez said:
lol completely passed my mind that it still runs on the win-mo backbone
Click to expand...
Click to collapse
It's all good.
I can only guess your using android JK
Attached is Android Splash Screen i just made
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks better on phone...

Problem with EnergyROM...please help me

I downloaded the ROM of Energey saw the pictures that ROM is nice, but when you install I saw everything differently, and some things do not work, someone can help me change the look of his?
And when I click on the Phone is not open to me, I mean I can not dial ...
Please help me ...
the my version is : Energy.BLACKSTONE.23542.Sense2.5_with_MaxManila.Ma r.05.7z
I want it to show me exactly Like This:
Home Screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone:
http://www.energyroms.com/PostGraphics/WVGA Screenshots/Leo ROMs/Dialer.png
The "PHONE" does not work for me, I click it does not open ...
tanks...
ZinGale said:
I downloaded the ROM of Energey saw the pictures that ROM is nice, but when you install I saw everything differently, and some things do not work, someone can help me change the look of his?
And when I click on the Phone is not open to me, I mean I can not dial ...
Please help me ...
the my version is : Energy.BLACKSTONE.23542.Sense2.5_with_MaxManila.Ma r.05.7z
I want it to show me exactly Like This:
Home Screen:
Phone:
http://www.energyroms.com/PostGraphics/WVGA Screenshots/Leo ROMs/Dialer.png
The "PHONE" does not work for me, I click it does not open ...
tanks...
Click to expand...
Click to collapse
First.. Why would you start new tread if you could post your question in the Energy ROM tread in which you would get much easier answer????
Second: reading and understanding before moving towards to possibly screw up your device is first thing to understand
Anyhow if you wanted ROM as same as in the picture then you need to flash Energy.BLACKSTONE.23542.Sense2.5.Mar.05.7z
..
im not understend you =\.....
ZinGale said:
im not understend you =\.....
Click to expand...
Click to collapse
Did you install hspl or use uspl to flash the rom? Read the following - http://forum.xda-developers.com/showthread.php?t=505377.
ok, 2 users have responded to assist you.
Firstly, Bulldog, who quite rightly asked why you didn't post this in the NRG thread in this forum instead of creating a new thread
Secondly, ClydeB1, asked whether you used HSPL or USPL which looks like a good starting point, and he also directed you to thread.
I suggest you ask the question about rom in NRG thread and ask for flashing assistance in dummies guide thread (link from ClydeB1)
Thread closed

[Q] wanna make sure I do everything right

Okay, so I just typed for 20 minutes on this reply and then accidentally closed the tab before posting. ;_; So let's try this again. It's probably going to be a bit shorter this time around, 'cause I don't wanna spend another 20 minutes, but mkay
I'm pretty new to all this, and while I think I have a decent idea of what to do, I want to make sure I'm going to be doing everything right the first time around
I was planning on doing the following:
1) install the 3 button combo fix
2) install clockworkmod recovery
3) install speedmod
4) install a custom rom
Now I have some questions regarding all this Probably very newbish questions, but alas, here goes:
1) clockworkmod=clockworkmod recovery right? same thing?
2) if I installed clockworkmod, could I still use Odin if wanted to?
3) radio, rom & kernel are 3 different things, ive been told by a friend with a HTC Hero. but I only see custom versions of ROM and Kernel for the SGS. Does that mean it's different for SGS users? how I should see this?
4) with clockworkmod I could put a backup stock rom into place to flash to in case I ever have to send my phone back, right?
5) custom roms dont include custom kernels right? since when I read custom rom threads they sometimes list kernels, as if they're included or something. confuses me. they're 2 entirely different things to install, right?
I think that's about it. Am I missing anything? I mean, is there anything I could/should do as well?
Hope you guys can help me
Greets
Thread title is supposed to be "[Q] wanna make sure I do everything right" not "[Q] wanna make sure I do everything"
anyone out there able to correct this for me? thanks in advance
zKsPOWERHOUSE said:
Thread title is supposed to be "[Q] wanna make sure I do everything right" not "[Q] wanna make sure I do everything"
anyone out there able to correct this for me? thanks in advance
Click to expand...
Click to collapse
done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AllGamer said:
done
Click to expand...
Click to collapse
thanks!
oh and bump

Issue with Rogers Captivate and Custom ROMs (title edit)

I'm about to save you a lot of time Rogers (Canada) Captivate users.
I spent the last 6 hours using http://serendipityrom.weebly.com/download.html these directions to flash a rom.
Here is what they don't tell you.
This is for the AMERICAN version (AT&T) Captivate only. Yes. You will be able to install the rom on your phone... but the SIM card supplied to you by rogers will not work with this rom.
Also, after following the "excellent" tutorials online and via youtube, you will end up with a phone flashed back to "stock" (At&T) stock... with all their bloatware. AND your startup graphic will now be "AT&T world phone"
Who would have known how good we had it as Rogers customers?
Bottom line. Stay away from Serendipity, and possibly all roms. Launcher pro is better than 90% of them anyway it seems. And you can turn that off in .6 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm currently using Serendipty 5.2 on my Rogers Captivate with no issues what so ever. You're most certainly doing something wrong.
Nice to know. The latest version is 5.7, which I installed. I will not add a clever image showing your folly by responding to my post out of common courtesy.
MikeyMike01 said:
Click to expand...
Click to collapse
How about explaining what I did wrong instead of a face palm? I know that's asking alot.
Are you saying the tut online doesn't flash to an ATnT stock? Are you saying I'm stupid? Are you saying your rom works no matter what? Tell me. Educate. Communicate.
At the very least refute my claims.
Do your self a favor and delete your comments. It is still early, not too many have read it yet. You need to read much more and gain a better understanding before you post something like this
It would appear that the statement made by the OP is false, in that the ROM works on various versions of the device.
If you need assistance, make a new thread in Captivate Q&A, without a title directing the issue at one particular ROM (how about something like the new title of this thread?)
Explain what you have tried, what isn't working (exactly), and someone might be so good as to tell you what you did wrong.
Closed

[Q] What problems can I expect with vanilla Android on S3 LTE(I9305)?

Hi,
Im thinking of buying a S3 LTE (I9305) here in Sweden but I really like the Nexus 4 stock rom. I have seen that its possible to install a Vanilla Android rom on S3 LTE but will this work perfect? If not, what problems might I get?
asking questions in this section is against the rules.
check the dev section for ROMs and known issues
Glebun said:
asking questions in this section is against the rules.
check the dev section for ROMs and known issues
Click to expand...
Click to collapse
Okay, I read this thread : http://forum.xda-developers.com/showthread.php?t=1633867 but I suppose I missed something.
I can´t see that I can move my thread my self so please move it to the correct forum.
SnowJim said:
Okay, I read this thread : http://forum.xda-developers.com/showthread.php?t=1633867 but I suppose I missed something.
I can´t see that I can move my thread my self so please move it to the correct forum.
Click to expand...
Click to collapse
You report the post to a mod via the red triangle in the OP ask to be moved to I9305 Q&A not I9300.
[READ THlS FlRST] POST QUESTIONS IN THE Q&A SECTION AND NOT HERE!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jje
read the rules first: http://forum.xda-developers.com/announcement.php?f=1564
SnowJim said:
Hi,
Im thinking of buying a S3 LTE (I9305) here in Sweden but I really like the Nexus 4 stock rom. I have seen that its possible to install a Vanilla Android rom on S3 LTE but will this work perfect? If not, what problems might I get?
Click to expand...
Click to collapse
First I would say the vanilla ROMs work OK but really the stock touchwiz offers so much more and better stable performance. Plus the Camera on Stock runs super great. In fact the video recording comes with stereo recording as opposed to vanilla doesn't
Sent from my GT-I9305 using xda premium
You can also run one of Samsung based ROMs, remove TW, install Nova Launcher or whatever you prefer, apply a theme like JB Domination, which is an AOSP like theme. There are also a couple of great kernels (Perseus, Boefla to name a few.) which offer so much more tweaking OC, O(U)V options then AOSP based ones.

Categories

Resources