Related
INTRODUCTION
As I promised in my last guide, I have played around with the RUUs in an attempt to bypass the "Model ID Incorrect" error, and have successfully installed the Optus 2.3.3 RUU on my Bell IS!
WHAT IS REQUIRED?
-a S-OFF'ed IS (doesn't need to be radio S-OFF'ed)
- That's it! A goldcard MAY also be required(it wasn't for me, but people are reporting they still get CID errors).
INSTRUCTIONS
Follow this guide until the 4th bullet under "How to install the Gingerbread update if you're S-OFF" but copy the rom.zip to your Desktop instead of your phone.
Extract rom.zip into your Desktop and open the new "rom" folder
First of all, you should now see 12 files in this folder. Delete the file "hboot_1.13.0000_CRC_8a731c6e_0401.img"... (This is mandatory! You MUST delete this file for the update to succeed! You may flash it on after installing the RUU if you wish, but you will lose S-OFF if you do not have radio S-OFF.)
Now open "android-info.txt" in wordpad or another similar text editor... The use of notepad is discouraged.
Now this is where the magic happens.
Change the line "modelid: PG3213000" to "modelid: PG3212000" (This will fix the "Model ID Incorrect" error)
[Optional] If you would like to flash the RUU without using a gold card then:
Add the following lines after "cidnum: OPTUS001":
cidnum: HTC__622
cidnum: HTC__038
cidnum: HTC__001
cidnum: HTC__044
cidnum: 11111111
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Now click "File" -> "Save".
Now Select all the files in the rom folder(Ctrl + A), right click on one of the file and select "Send to" -> "Compressed (zipped) folder" and rename the folder to PG32IMG.zip.
Return to this guide and follow the rest of the bullets under "How to install the Gingerbread update if you're S-OFF"
Enjoy your gingerbread RUU
Excellent tutorial, but would you help me with another issue?
I am running CyanogenMod 7 (2.3.4) on my Incredible S and I can't make calls because I can't hear or speak anything.
Now, I did that change to the script and I got past Model ID issues, but now it is saying my CID is incorrect??
IXXBC said:
Excellent tutorial, but would you help me with another issue?
I am running CyanogenMod 7 (2.3.4) on my Incredible S and I can't make calls because I can't hear or speak anything.
Now, I did that change to the script and I got past Model ID issues, but now it is saying my CID is incorrect??
Click to expand...
Click to collapse
Did you add the lines:
cidnum: HTC__622
cidnum: HTC__038
cidnum: HTC__001
cidnum: HTC__044
cidnum: 11111111
a better way
this way works with every BRANDED IS (including canadian bell vr)
after using alpharevx to achieve s-off
u will want to install recovery next (just like any other tutorial tells you), but branded IS will always get a CID-incorrect
inorder to fix this, create a goldcard by following this link
wiki.cyanogenmod.com/index.php?title=Howto:_Create_a_Goldcard
except when you are on step 3, use this command instead
cat /sys/class/mmc_host/mmc2/mmc2:*/cid
USING MMC1 or MMC0 will never work!!!
using your goldcard, you will bypass all the cid incorrect problems
then you can use your gold card to flash recovery / radio
cheers
IXXBC said:
Excellent tutorial, but would you help me with another issue?
I am running CyanogenMod 7 (2.3.4) on my Incredible S and I can't make calls because I can't hear or speak anything.
Now, I did that change to the script and I got past Model ID issues, but now it is saying my CID is incorrect??
Click to expand...
Click to collapse
you will need to flash a new radio, under CM7 post he should have told you to flash a new radio. After flashing the new radio no audio bug will go away
Insufficient storage available after rooting!
Please ignore this post.
Hi
I followed all your instructions:
Downloaded : RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2803.30.085AU_3805.04.03.12_M_release_185028_signed
Then romved the hboot file
Updated android_info.txt to:
modelid: PG3212000
cidnum: OPTUS001
cidnum: HTC__622
cidnum: HTC__038
cidnum: HTC__001
cidnum: HTC__044
cidnum: 11111111
hbootpreupdate:13
mainver: 2.12.980.2
Zipped into the PG32IMG.zip file.
Uploaded to my sd card
Rebooted my phone in the bootloader...
But I get "CID incorrect"
What could I be doing wrong?
Then I checked XDA and found how to get my CID this is what I got:
C:\Users\fabian\Desktop\CWM>adb shell getprop ro.cid
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
BM___001
How can I fix this?
Thanks.
Thanks.
My phone info:
vivo pvt ship s off lr
hboot 1.09.0000
Radio-38.02.01.17_m
eMMC-boot
Feb 11 2011 11:52:44
aresguerrero said:
Hi
I followed all your instructions:
Downloaded : RUU_Vivo_Gingerbread_S_Optus_AU_2.12.980.2_R_Radio_20.2803.30.085AU_3805.04.03.12_M_release_185028_signed
Then romved the hboot file
Updated android_info.txt to:
modelid: PG3212000
cidnum: OPTUS001
cidnum: HTC__622
cidnum: HTC__038
cidnum: HTC__001
cidnum: HTC__044
cidnum: 11111111
hbootpreupdate:13
mainver: 2.12.980.2
Zipped into the PG32IMG.zip file.
Uploaded to my sd card
Rebooted my phone in the bootloader...
But I get "CID incorrect"
What could I be doing wrong?
Then I checked XDA and found how to get my CID this is what I got:
C:\Users\fabian\Desktop\CWM>adb shell getprop ro.cid
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
BM___001
How can I fix this?
Thanks.
Thanks.
My phone info:
vivo pvt ship s on lr
hboot 1.09.0000
Radio-38.02.01.17_m
eMMC-boot
Feb 11 2011 11:52:44
Click to expand...
Click to collapse
This method will only work if you have s-off, not s-on. You need to run AlphaRevX to gain s-off and then you can flash a new ROM.
Hi sorry for the confusion, I did S-OFF my device with AlphaRevX and installed CMW... I just copied and old txt file with the word S-ON on it.
Any ideas? By the way, what does CID stand for?
Excellent tutorial
This is beyond fantastic. I have had my phone in Hboot-Fastboot with a boot loop for 4 days and counting. It was so bad to the point where my GF was almost ready to buy me a new Sensation 4G off kijiji!
Regardless this is great news, I will try it out the minute I am home from work.
FINGERS CROSSED!
-----UPDATE-----
I followed the instructions front to back. Archived all of the ROM contects, made deletion of Hboot file in rom. Changed cid numbers. Renamed the archive as PG32IMG.zip after formatting my SD card. Went to hboot on my DincS, and it said image not found. Found it odd since it worked yesterday when I used a differend PG32IMG batch, it failed but it made it past the reading cycle before the update.
Any thoughts?
Hi guys
I really need your help here. Please
I've been able to:
S-Off using alpharevx.
Install CWM.
Root my device.
And even flash it with a Saskatel Froyo ROM.
I downloaded the OPTUS, Vigin and Europe ROMS, and every time tried flashing I get.
Model ID incorrect.
Then I found this thread
http://forum.xda-developers.com/showthread.php?t=1145541
Explaining this issue. I
unziped the files,
removed the booter file,
modified android.txt and added the lines described.
However, when I try flashing the ROM, I get a CID incorrect!!!!!!!!!
I really want to get GB, how do I overcome this?
@aresguerrero, is it really needed to double post?
Just loaded all files as described in tutorial. I am getting CID incorrect.
Just to clarify my Dincs is stuck in a bootloop. I have no backups, no custom firmware.
This is what my phone is showing:
---AlphaRev---
VIVO PVT SHIP S-OFF RL
HBOOT-1.09.1000
RADIO- 3005.04.03.22_M
cMMC-boot
Fed 11 2011, 11:52:44
HBOOT
CID incorrect!
Update Fail!
@ Thumper0G
I get the same CID Incorrect, the only ROM I've been able to flash is the one from Saskatel.
Keep me updated, I've looked a lot trying to find a solution.
Bye
aresguerrero said:
@ Thumper0G
I get the same CID Incorrect, the only ROM I've been able to flash is the one from Saskatel.
Keep me updated, I've looked a lot trying to find a solution.
Bye
Click to expand...
Click to collapse
Ran the RUU file and lost my S-OFF. so basically now im completely fugged!!!
Thumper0G said:
Ran the RUU file and lost my S-OFF. so basically now im completely fugged!!!
Click to expand...
Click to collapse
You are in the same boat I have been for two weeks now. If only Bell were to release their Gingerbread update and all problems would be avoided .
ClaudiuJer said:
You are in the same boat I have been for two weeks now. If only Bell were to release their Gingerbread update and all problems would be avoided .
Click to expand...
Click to collapse
Well here is the problem. I am stuck in a boot loop. Even though the RUU.exe says that the update has installed and my android is ready to use, I am still in a bootloop.
Yes this is awesome that the phone updated for once. PROBLEM> NO S-OFF and BOOTLOOP is still going on...
I am sooooo stuck.
NOW, here's a question. Would my phone be ok to send in for service now that the S-OFF is gone and it's back to S-ON or is my warranty no good.
Can I make a goldcard even though my droid is unusable?
if not can I use my gf's Incredible S. its the same phone, and carrier.
I've used this ROM to get gingerbread 2.3.
aresguerrero said:
Hi guys
I downloaded the OPTUS, Vigin and Europe ROMS, and every time tried flashing I get.
Model ID incorrect.
Then I found this thread
http://forum.xda-developers.com/showthread.php?t=1145541
Explaining this issue. I
unziped the files,
removed the booter file,
modified android.txt and added the lines described.
However, when I try flashing the ROM, I get a CID incorrect!!!!!!!!!
I really want to get GB, how do I overcome this?
Click to expand...
Click to collapse
@ ClaudiuJer
It occurs to me that:
You can get an XTC clip and get rid of the S-ON (Hardware)
Then flash the Saskatel 2.2 ROM as I did.
Hope that helps...
hi i have incredible s canadian version sasktel and i have try to install rom from ruu and i renamed it to pg32img.zip and i install from bootloader and when it finish the appear cid incorrect and failed and the device now is freezing on bootloader and it appear Security Warning and s-on and i cant use usb connection..how can i installed the orginal rom via memory card or what?
any body can help me??
hashnoz said:
hi i have incredible s canadian version sasktel and i have try to install rom from ruu and i renamed it to pg32img.zip and i install from bootloader and when it finish the appear cid incorrect and failed and the device now is freezing on bootloader and it appear Security Warning and s-on and i cant use usb connection..how can i installed the orginal rom via memory card or what?
any body can help me??
Click to expand...
Click to collapse
Before you attempted this, did you run AlphaRevX to gain S-OFF? Which RUU were you attempting to install? There was another thread about this 'Security Warning' on the HBOOT screen and I'm not sure the OP was able to get this resolved.
yes the phone was s-off but after i install the rom the phone back to s-onn now i cant connect via usb or connection just it appear 'Security Warning' how can install orginal rom?
hashnoz said:
yes the phone was s-off but after i install the rom the phone back to s-onn now i cant connect via usb or connection just it appear 'Security Warning' how can install orginal rom?
Click to expand...
Click to collapse
Here is the other thread about the Security Warning. You may want to read through it and see if any of the suggestions will work for you.
http://forum.xda-developers.com/showthread.php?t=1136041
The only way to get out of that is by flashing the stock RUU the phone came with. In your case it would have to be Sasktel and if that doesn't work because you receive the error "Main Version is Older!" then your screwed. Your going to have to wait until Sasktel or Bell releases their official gingerbread updates.
I am in the exact same boat as I am the composer of the thread from above lol.
Hi All My phone dead because I try to installed 2.30.405.1 from RUU extracted PG32IMG.zip. when phone is power ON top side write "Security Warning" MY Phone CID is HTC__038 (for Indian) but I had european Rom 2.12.405.7.
phone boot only fastboot and getvar /all info here
C:\fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.13.0000
INFOversion-baseband: 3805.06.03.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.12.405.7
INFOserialno: HT15********
INFOimei: 35*************
INFOproduct: vivo
INFOplatform: HBOOT-7630
INFOmodelid: PG3213000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4168mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-8a731c6e
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
I Installed 2.12.405.7 with goldcard. and new can't make goldcard because not ADB
I try add android_info.txt this text cidnum: HTC__038 but not worked
I hope I need Indian RUU Rom with CID: HTC__038 Or who know this Problem? and who can help me?
I had the same problem with my Bell IS, I just ran the ruu.exe from a Windows pc and it installed with no problems at all. Now I'm back to a stock rom, with no problems at all.
I am going to S-off and root again later, whenever a stable Rom comes round. If you don't have a stock RUU, you can get it on HTC'S website, if one for you carrier is available.
Sent from my HTC Incredible S using XDA Premium App
In official htc site can't find stock ruu installer for my IS with cid:HTC__038.
You can create a gold card and try flashing your original rom or the rom you were originally trying to flash on your phone.
Can you tell me were or how to make? I have not CID for Gold card
How to make w/o ADB and w/o XTC-Clip?
You can buy a card reader and try and make one that way. Then put the goldcard into the inc s.
Sent from my HTC Incredible S using XDA App
Have you tried to install the SaskTel ruu.exe gb upgrade from Windows?
If that won't work, then you will have to find the proper ruu for your phone and install via a pc.
Sent from my HTC Incredible S using XDA Premium App
sasktel ruu and zip file not worked - 'model id incorrect'
:-(
Try removing android.txt, leave it out and run ruu again.
It is pretty hard to brick a phone, it just takes some time and a lot of trying different things, but you should be able to succeed.
Sent from my HTC Incredible S using XDA Premium App
ste1164 said:
You can buy a card reader and try and make one that way. Then put the goldcard into the inc s.
Sent from my HTC Incredible S using XDA App
Click to expand...
Click to collapse
How to I do. I have card reader from my Laptop
budleyca said:
Try removing android.txt, leave it out and run ruu again.
It is pretty hard to brick a phone, it just takes some time and a lot of trying different things, but you should be able to succeed.
Sent from my HTC Incredible S using XDA Premium App
Click to expand...
Click to collapse
Not worked
i need to bypass signature checking (it is my problem)
what i made:
first it boot in fastboot, then erase cache, boot ruu mode and
ran installer ruu 2.12.405.7 then i change android_info.txt
modelid: PG3213000
cidnum: HTC__038
mainver: 2.12.405.7
hbootpreupdate:13
made pack rom.zip and overwrite original rom.zip (temp folder)
but installer sad sending, cleaning user data, and checking signature and stoped - "incorrect signature"
what i must do?
kuba28ms said:
i need to bypass signature checking (it is my problem)
what i made:
first it boot in fastboot, then erase cache, boot ruu mode and
ran installer ruu 2.12.405.7 then i change android_info.txt
modelid: PG3213000
cidnum: HTC__038
mainver: 2.12.405.7
hbootpreupdate:13
made pack rom.zip and overwrite original rom.zip (temp folder)
but installer sad sending, cleaning user data, and checking signature and stoped - "incorrect signature"
what i must do?
Click to expand...
Click to collapse
The only way to by-pass the HTC signature check in RUU mode is if you have S-OFF (security off).
so no way to repair phone?
kuba28ms said:
so no way to repair phone?
Click to expand...
Click to collapse
Ok so I have gone back and reread your posts. I would suggest you go back and try flashing 2.30.405.1 instead of trying to go back to 2.12.405.7. According to your getvar output, the radio from the 2.30.405.1 has been flashed. It would probably help if you could make a gold card and then try flashing the 2.30.405.1 RUU. Or you can try it without a gold card.
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Nobody?
Enviado de meu HTC One usando Tapatalk
ksarius said:
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Click to expand...
Click to collapse
1- no need to be relocked/locked with S-Off
2- error 140? (i thought it would give error 155), but anyway, it's due hboot 1.55, you need to first & separately downgrade hboot to 1.44, check my guide in my signature in post #1 there's the hboot download link and instructions.
DO NOT GO S-ON!
ksarius said:
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Click to expand...
Click to collapse
there is a 3.22.1540.1 ruu on thcdev,com that use hboot 1.55 here
select the filter model to ''one'' and carrier to ''brightstar'' and it should be the fisrt option in the list
thanks guys!....actually i wrote it wrong. My phone is not s-off!......its s-on.
Anyway I will try what you guys said and ill report it back. thanks!
ksarius said:
thanks guys!....actually i wrote it wrong. My phone is not s-off!......its s-on.
Anyway I will try what you guys said and ill report it back. thanks!
Click to expand...
Click to collapse
I am downloading the RUU 3.22.1540.1 right now and see if it works. If it doesnt, is it possible to s-off without a rom in my phone?
I tried revone, but i needed the phone to be working. How about rumrunner?
Because that way, I could downgrade and then finish the work.
Right now all I can do with the phone is get to bootloader and twrp recovery.
Thanks
ksarius said:
I am downloading the RUU 3.22.1540.1 right now and see if it works. If it doesnt, is it possible to s-off without a rom in my phone?
I tried revone, but i needed the phone to be working. How about rumrunner?
Because that way, I could downgrade and then finish the work.
Right now all I can do with the phone is get to bootloader and twrp recovery.
Thanks
Click to expand...
Click to collapse
first try the ruu you are downloading
revone will only work with hboot 1.43 - 1.44. you have to use rumrunner to s-off hboot 1.55 with a rom like arhd 31.6 or cyanogenmod 10 (because of their unsecured kernel)
or you can also go back to stock with a guru reset rom which you can adb push to the device and install via custom recovery.
alray said:
first try the ruu you are downloading
revone will only work with hboot 1.43 - 1.44. you have to use rumrunner to s-off hboot 1.55 with a rom like arhd 31.6 or cyanogenmod 10 (because of their unsecured kernel)
or you can also go back to stock with a guru reset rom which you can adb push to the device and install via custom recovery.
Click to expand...
Click to collapse
thanks! the RUU worked!....now leaving the phone stock
ksarius said:
thanks! the RUU worked!....now leaving the phone stock
Click to expand...
Click to collapse
:highfive:
now you can update via ota to 4.06.1540.3 without any issue
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Stefan0vic said:
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Click to expand...
Click to collapse
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
clsA said:
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
Click to expand...
Click to collapse
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Stefan0vic said:
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Click to expand...
Click to collapse
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
clsA said:
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
Click to expand...
Click to collapse
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Stefan0vic said:
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Click to expand...
Click to collapse
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
and no you have hboot 1.56 after the RUU step
the hboot 1.44 insures the RUU will work smoothly
it's also a vital step if you want to remove tampered and show locked instead of relocked
to return for repair
clsA said:
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Saw you edited your post, thank you so much
Stefan0vic said:
I'll just keep my pc on for a bit Thank you so much for your help.
Just 1 more question, will my bootloader be updated with the RUU itself? I need the phone as much stock possible since I need to give it for warranty for camera replacement.
Click to expand...
Click to collapse
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Method 2: Guru Bootloader Reset, more automated, but may freeze
adb push Guru_Bootloader_Reset_1.0.zip /data/media/
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader"; once finished: continue with below reboot command
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Click to expand...
Click to collapse
clsA said:
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Click to expand...
Click to collapse
I dont have the tampered flag so i guess i dont have to do that,
I will use that to get my bootloader locked though, thank you. RUU is still downloading as we speak but I can almost run it
So its:
1. Flash hboot
2. lock bootloader
3. run RUU?
Help!! It returns me with an image fault!!
Error: 158 !
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
don't panic .. just use a different ruu
clsA said:
don't panic .. just use a different ruu
Click to expand...
Click to collapse
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
ERROR [130]: MODEL ID ERROR
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Sent from my HTC One using XDA Premium 4 mobile app
I know what the error means, but I don't know what RUU I need, i thought it accepted everything since I was s off
Stefan0vic said:
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Click to expand...
Click to collapse
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
File Size: 1.5 GiB - Downloads: 69507
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
after 69,000 plus downloads you think someone would report if it's a bad file
clsA said:
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
after 69,000 plus downloads you think someone would report if it's a bad file
Click to expand...
Click to collapse
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Stefan0vic said:
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Click to expand...
Click to collapse
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
clsA said:
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
Click to expand...
Click to collapse
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Stefan0vic said:
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Click to expand...
Click to collapse
well if you flashed the 1.44 hboot your pc must work in fastboot
what state is the phone in when you run the RUU ? bootloader / recovery / Android OS ?
hey guys, please help me out.
yesterday I got a call from my family member that he did something wrong (switched off the phone while it was installing the OTA) and now his htc one (m7) is not starting, he has no idea about the android rooting and stuff nor do I, but he asked me to find out the solution.
so here is what I did apart from too much of reading the same info again n again (and I did all this things remotely with his help as my relative lives is in another city)
1. unlocked bootloader
2. flashed twrp (latest)
3. then I came across this guru reset file (a zip file) and flashed it, I used this file because I read RUU are the real stock files but to use them I need s-off which i didn't have. below is the detailed info of the file I flashed (copied from the webpage
"
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 33194
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
"
I did not choose anything extra ordinary in aroma installer, just stock radio and recovery.
everything is working fine now with just one little problem, the mobile is not receiving OTA updates, it's showing an error about "variant version"
I read even more and came across the words , CID and MID
i checked them after flashing the new file, it's
MID - PN0711000
CID - HTC__038
I don't know if it changed automatically after flashing new rom but my MID and CID is matching the file detailed info of the zip i flashed, so please let me know what should I do now?
more details about the phone
bootloader : Unlocked
M7_U PVT S-ON RH
H-Boot : 1.57.0000
android version : 4.3
htc sense version : 5.5
software version : 3.63.707.3
GravityDead said:
hey guys, please help me out.
yesterday I got a call from my family member that he did something wrong (switched off the phone while it was installing the OTA) and now his htc one (m7) is not starting, he has no idea about the android rooting and stuff nor do I, but he asked me to find out the solution.
so here is what I did apart from too much of reading the same info again n again (and I did all this things remotely with his help as my relative lives is in another city)
1. unlocked bootloader
2. flashed twrp (latest)
3. then I came across this guru reset file (a zip file) and flashed it, I used this file because I read RUU are the real stock files but to use them I need s-off which i didn't have. below is the detailed info of the file I flashed (copied from the webpage
"
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 33194
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
"
I did not choose anything extra ordinary in aroma installer, just stock radio and recovery.
everything is working fine now with just one little problem, the mobile is not receiving OTA updates, it's showing an error about "variant version"
I read even more and came across the words , CID and MID
i checked them after flashing the new file, it's
MID - PN0711000
CID - HTC__038
I don't know if it changed automatically after flashing new rom but my MID and CID is matching the file detailed info of the zip i flashed, so please let me know what should I do now?
more details about the phone
bootloader : Unlocked
M7_U PVT S-ON RH
H-Boot : 1.57.0000
android version : 4.3
htc sense version : 5.5
software version : 3.63.707.3
Click to expand...
Click to collapse
Since the phone hboot version is 1.57, there is a mismatch between your rom (software) version and your firmware version. hboot 1.57 is for version 5.xx.xxx.x 6.xx.xxx.xx, so in your case you should flash the 5.12.707.104 reset rom not the 3.63.707.4.
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
Can you post the ouput of "fastboot getvar all" except the IMEI and SERIALNO?
GravityDead said:
hey guys, please help me out.
yesterday I got a call from my family member that he did something wrong (switched off the phone while it was installing the OTA) and now his htc one (m7) is not starting, he has no idea about the android rooting and stuff nor do I, but he asked me to find out the solution.
so here is what I did apart from too much of reading the same info again n again (and I did all this things remotely with his help as my relative lives is in another city)
1. unlocked bootloader
2. flashed twrp (latest)
3. then I came across this guru reset file (a zip file) and flashed it, I used this file because I read RUU are the real stock files but to use them I need s-off which i didn't have. below is the detailed info of the file I flashed (copied from the webpage
"
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 33194
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
"
I did not choose anything extra ordinary in aroma installer, just stock radio and recovery.
everything is working fine now with just one little problem, the mobile is not receiving OTA updates, it's showing an error about "variant version"
I read even more and came across the words , CID and MID
i checked them after flashing the new file, it's
MID - PN0711000
CID - HTC__038
I don't know if it changed automatically after flashing new rom but my MID and CID is matching the file detailed info of the zip i flashed, so please let me know what should I do now?
more details about the phone
bootloader : Unlocked
M7_U PVT S-ON RH
H-Boot : 1.57.0000
android version : 4.3
htc sense version : 5.5
software version : 3.63.707.3
Click to expand...
Click to collapse
The reset Rom is for an older Firmware version than your phone is running
The Rom is version is 3.xx.707.x but your actual firmware version is 5.xx.707.x or 6.xx.707.x as indicated by hboot 1.57. Try the reset Rom from this link
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Danny201281 said:
The reset Rom is for an older Firmware version than your phone is running
The Rom is version is 3.xx.707.x but your actual firmware version is 5.xx.707.x or 6.xx.707.x as indicated by hboot 1.57. Try the reset Rom from this link
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-t2802061
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
I'm faster than you
OP you have 2 for the price of 1
Thank you, Danny and alray, both of you for saving me time and headache
It worked perfectly, phone updated to 4.4.3
THANK YOU!!!
GravityDead said:
Thank you, Danny and alray, both of you for saving me time and headache
It worked perfectly, phone updated to 4.4.3
THANK YOU!!!
Click to expand...
Click to collapse
Good to hear your sorted and no need to say thanks there's a button for that
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good: