Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Also, some already suggested that my problem is with CWM and I should flash TWRP recovery instead to flash ARHD. But the problem I'm facing is that my touchscreen suddenly doesn't respond on TWRP recovery but on CWM it works. Any idea on why this happens or is there just something I just don't see here or doing wrong with TWRP?
Baconnugget said:
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Also, some already suggested that my problem is with CWM and I should flash TWRP recovery instead to flash ARHD. But the problem I'm facing is that my touchscreen suddenly doesn't respond on TWRP recovery but on CWM it works. Any idea on why this happens or is there just something I just don't see here or doing wrong with TWRP?
Click to expand...
Click to collapse
Hi, sorry I just saw this, where did you get twrp recovery from ?
make sure you get it from here: http://techerrata.com/browse/twrp2/m7
also can you post your "fastboot getvar all" please, make sure you remove your imei and serial number from the output before posting.
---------- Post added at 08:37 PM ---------- Previous post was at 08:30 PM ----------
aslo, after flashing recovery, clear cache and reboot to bootloader.
ie:
fastboot flash recovery (recovery_name).img
fastboot erase cache
fastboot reboot-bootloader
wait for each command to complete before issuing the next, after the reboot, try recovery again.
Seanie280672 said:
Hi, sorry I just saw this, where did you get twrp recovery from ?
make sure you get it from here:
also can you post your "fastboot getvar all" please, make sure you remove your imei and serial number from the output before posting.
---------- Post added at 08:37 PM ---------- Previous post was at 08:30 PM ----------
aslo, after flashing recovery, clear cache and reboot to bootloader.
ie:
fastboot flash recovery (recovery_name).zip
fastboot erase cache
fastboot reboot-bootloader
wait for each command to complete before issuing the next, after the reboot, try recovery again.
Click to expand...
Click to collapse
Alright. I will post it later when I get home. Yup. I got TWRP from there but I think I downloaded the 2.5.0.0 one because it was the one on top. -__- I think that's the issue. I'll flash TWRP 2.6.3.3 as you said in the other thread. Much thanks to you.
Baconnugget said:
Alright. I will post it later when I get home. Yup. I got TWRP from there but I think I downloaded the 2.5.0.0 one because it was the one on top. -__- I think that's the issue. I'll flash TWRP 2.6.3.3 as you said in the other thread. Much thanks to you.
Click to expand...
Click to collapse
yep, you must use at least twrp 2.6.3.3, there are newer version (2.7+) but better to use 2.6.3.3, this version is known to work properly and bug free.
Thank you to both of you! I greatly apreciate your help. My One is finally working again and even better than before! This is why XDA is the best source for all your Android needs!
Related
So I need help from everybady please becouse i try to solve it but its stile
aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.
Did you try to enter in recovery?
However, longpress power button
b3ndech0 said:
i had this yesterday after unlocking bootloader. for me pressing the power button for about 30 seconds fixed the problem.
Click to expand...
Click to collapse
I Try but its stil
You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.
Guich said:
You can try to longpress vol+ for enter in stock recovery if you will enter in recovery.
but i think you've resolved.
Click to expand...
Click to collapse
I tried but still the problem
aburenad said:
So I need help from everybady please becouse i try to solve it but its stile
Click to expand...
Click to collapse
Did you install custom recovery to phone?
dadrocker said:
Did you install custom recovery to phone?
Click to expand...
Click to collapse
Yes, several times
If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit
dadrocker said:
If you are trying to install a custom rom try All in one toolkit... If you want to return to stock try http://forum.xda-developers.com/showthread.php?t=2224752&highlight=stock+rom
http://forum.xda-developers.com/showthread.php?t=2183942&highlight=all+in+one+toolkit
Click to expand...
Click to collapse
Yes, I try to go back to the original, but I can not my device information in attach
Download Stock Rom exe from this thread. And run the application. That will guide you to install the stock rom.I thin this will solve your problem. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
http://forum.xda-developers.com/showthread.php?p=39588860
Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?
kane274 said:
Hi. I dont mean to hijack the thread but I thought it would be better than starting a new thread with the same problem. I just got my One today and started going through the process of installing a custom rom. I unlocked the bootloader, installed a custom recovery and root and everything went fine. When I went to install Revolution 9.2 I went through the aroma installer and everything said it went OK but I'm now in a boot loop.
I installed the toolkit and using that I was able to flash different recoveries, including the stock recovery, but while I can see a different recovery screen flash, it then still boot loops. I can get into Fastboot, but not recovery. I'm downloading a stock rom exe as suggested, but didnt know which one to select. Im downloading an Asia one since im in NZ and thats the closest. is it possible to flash back to stock by fastboot? Im wondering if my partition got porked during the rom flash.
Any ideas?
Click to expand...
Click to collapse
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache
dadrocker said:
If you can get into fastboot you can return to the stock rom. or you can install ARHD 9.2 again.
---------- Post added at 12:19 PM ---------- Previous post was at 12:16 PM ----------
By the way don't forget the erase the cache. Fastboot erase cache
Click to expand...
Click to collapse
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option
kane274 said:
OK, I'm sorry to ask silly questions. if I have the ARHD 9.2 Zip, what commands in Fastboot to install the Zip?
And thanks for the erase cache option
Click to expand...
Click to collapse
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.
dadrocker said:
If you installed All In One Toolkit You can install that rom by using SIDELOAD installation.
Click to expand...
Click to collapse
Thanks, will give that a try
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Thanks man. I just tried side loading and realised I needed to get into recovery to do that. Fingers crossed
---------- Post added at 09:47 PM ---------- Previous post was at 09:43 PM ----------
dadrocker said:
But before you must find a way to stop the boot loop and enter to the recovery.
There is a boot.img in the ARHD zip file. Extract that file and by using "fastboot flash boot boot.img" command install to the phone.
After that erase the cache again. And Install any custom recovery. Try installing rom by AIO Toolkit SIDELOAD option.
Click to expand...
Click to collapse
Yay, thanks very much. Just managed to boot into TWRP :good:
Thanks for everybady i solve it
aburenad said:
Thanks for everybady i solve it
Click to expand...
Click to collapse
I'm glad
Thanks for sharing your thread, I managed to solve mine too with the help here.
Hey Guys Need help here!!!
I'll tell you what exactly i did
1 - Unlocked from HTC dev
2 - Flashed CWM recovery
3 - Phone didn't reboot ... but it started flashing a message that its a developer version(Red text below HTC logo)
4 - I managed to reboot into recovery and wiped the rom and and hit restore nandroid backup i did earlier.
5 - It never booted back whilst i got a restore successful message.
Phone is Tampered and Unlocked!!
Sd card cant mount.
I do not have rom on the Sd card!
Please Help me. I can get into boot loader and recovery thats it!!!
Thank You!!
where did i go wrong here? Can this be fixed?
If you can enter cwm, you should be able to use adb push/sideload to place a rom on your sdcard
fka said:
If you can enter cwm, you should be able to use adb push/sideload to place a rom on your sdcard
Click to expand...
Click to collapse
Thanks!!! I tried and didnt work. Any other solutions?
Are you able to get into fastboot mode? if yes, you could go into ruu mode and flash your stock firmware, iirc the ruu zip only has to be on your computer.
anyway, this seems to be very odd tho... maybe you should wait for some expert to reply,because my knowlegde is kinda limited also if i remember correctly, there is one guy on this forum, that offers free unbrick support via chat...
---------- Post added at 12:15 PM ---------- Previous post was at 12:11 PM ----------
Here we go:
Matt's Unbrick help: http://bit.ly/17sn119
fka said:
Are you able to get into fastboot mode? if yes, you could go into ruu mode and flash your stock firmware, iirc the ruu zip only has to be on your computer.
anyway, this seems to be very odd tho... maybe you should wait for some expert to reply,because my knowlegde is kinda limited also if i remember correctly, there is one guy on this forum, that offers free unbrick support via chat...
---------- Post added at 12:15 PM ---------- Previous post was at 12:11 PM ----------
Here we go:
Matt's Unbrick help: http://bit.ly/17sn119
Click to expand...
Click to collapse
I can boot into RECOvery and to Bootloader.
SD crad cannot be mounted.
I have seen a video which shows SD card can be formatted thru stock recovery image.
Is there a fix for SD card mounting error?
Thank you!
sorry i dont understand what you are talking about...
oh i forgott, if you can enter fastboot mode, try "fastboot erase cache"
fka said:
oh i forgott, if you can enter fastboot mode, try "fastboot erase cache"
Click to expand...
Click to collapse
Did that no luck.
For some stupid reason I thought I had S-Off. Installed a rom that required S-Off.
Phone boots to the "select language screen", then reboots itself. Does this continuously.
Can't mount my phone to my computer either. Any ideas?
Phone is unlocked and rooted.
Didn't do a backup either.
You can install roms with s-on. Boot into recovery and install another rom. If problem continues you can fastboot erase cache.
Sent from my iPad using Tapatalk
I don't have any other roms on my phone.
Nawzlew said:
I don't have any other roms on my phone.
Click to expand...
Click to collapse
do you have custom recovery? TWRP?
---------- Post added at 09:20 PM ---------- Previous post was at 09:13 PM ----------
flash TWRP recovery 2.6.3.3 for M7 if you have international M7
Reboot into recovery.
Now make a Wipe of the phone like when you installing new ROM.
Now Select mount
Tick DATA and just data. System and Cache must be unchecked. Leave it there for now.
Now download new ROM you want and put it into your fastboot folder with adb.exe and fastboot.exe files in it if you know what i mean.
Now start fastboot and write following adb push rom.zip /sdcard/. and hit enter. Wait a couple of minutes until you see that files are transfered.
now go back from mount in TWRP until you see the rom file. FLASH the ROM...
Tried two roms and it fails when trying to flash.
I'll try and download some others ...
Nawzlew said:
Tried two roms and it fails when trying to flash.
I'll try and download some others ...
Click to expand...
Click to collapse
Did you flash the recovery i said to you?
Wich roms are you trying to flash?
Nevermind, I kept flashing the same rom and it worked.
THANK YOU so much.
Nawzlew said:
Nevermind, I kept flashing the same rom and it worked.
THANK YOU so much.
Click to expand...
Click to collapse
No problem. Glad you fixed it. Remember you can allways push a rom into a HTC ONE if you wiping **** out of it.
Just be sure to be on custom recovery like TWRP 2.6.3.3 or 2.6.3.4
Good luck
So I just got a AT&T black HTC One, unlocked bootloader, installed TWRP (first time, always used CWM in the past) rooted, s-off. Nandroid backup. I am no stranger to flashing ROMs with past devices but I CANNOT get a custom rom to install on this thing! I have tried a couple different 4.4 ROMs and each one always gives me some sort of error or failure when installing. Each time I do the standard TWRP wipe, then immediately try and flash, and they never successfully install. When I reboot it shows the HTC screen then crashes, and automatically reboots into recovery. Any ideas on what am I doing wrong? Is it something with TWRP I'm unaware of? Do the rom files have to be placed somewhere specific in TWRP?
This is what I see everytime after trying to flash a ROM:
set_metadata_recursive: some changes failed
E: Error executing updater binary in zip '/sdcar(the screen cuts off whatever comes after this)
Updating partition details...
Failed
Thanks in advance!
What version of twrp? Firmware version?
SaHiLzZ said:
What version of twrp? Firmware version?
Click to expand...
Click to collapse
TWRP = 2.6.3.0
I think firmware means build number, which is = 1.26.502.10 CL166754 release-keys
Is that what you mean? I don't remember ever changing anything relating to "firmware", not on this new phone today nor on any old devices. Just like that I feel super noobish again.
You probably need 2.6.3.4 or whatever is latest.
Also post an output of fastboot getvar all (remove sn/imei)
sent from my mobile device
---------- Post added at 12:15 AM ---------- Previous post was at 12:15 AM ----------
Absolutely S-off before you go any further
sent from my mobile device
SaHiLzZ said:
You probably need 2.6.3.4 or whatever is latest.
Also post an output of fastboot getvar all (remove sn/imei)
sent from my mobile device
---------- Post added at 12:15 AM ---------- Previous post was at 12:15 AM ----------
Absolutely S-off before you go any further
sent from my mobile device
Click to expand...
Click to collapse
Welp, updating to the latest 2.6.3.3 seemed to fix it. Just flashed a ROM without errors. I'm just booting into the new ROM now and while it's going through the "Android is upgrading..." screen all indications are that it was a successful flash. Thank you and thanked!
My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!
technocrat7 said:
My friend's phone is stuck in bootloop and I believe it's soft bricked.
It's a stock brand new HTC One M7.
It was updating one day and he said it might have got corrupted because it just shut down and when it booted back up it was stuck at the HTC Screen and wouldn't do anything.
Over the last week I have been trying to unbrick it.
It's LOCKED and S-ON Sprint HTC One M7.
I did a factory reset, wiped cache, dalvic cache, reboot. I tried putting in fastboot and flashing RUU on it but it kept failing because the RUU I had was a lower version of the image than the current one on the phone and I read online that I can only flash backwards if it's S-OFF.
Any help?
Thanks!
Click to expand...
Click to collapse
if the phone is new (never tampered with) and still under warranty, send it back for repair or replacement
s-off and run the ruu
unlock bootloader, flash a custom recovery and flash a rom or a nandroid backup
post in the sprint htc one forum for more detailed info
So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app
I'm pretty sure that in order to S-off you will need to be booted up first? The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first. Do you have an adb/fastboot environment set up? If so you are practically there. On a side note, I have seen no less than 3 m7s fail and softbrick on the first attempt at applying an ota, but it was always after S-off and a conversion to fully stock gpe (these were gsm models). I figured it was just because of the mods but who knows. Anyway, if you can locate and install a fully stock sprint RUU you should be back to where you were before the ota at which point you can proceed with whatever else you want to do.
technocrat7 said:
So the first step is S-OFF because I don't think k the warranty is on it.
And then custom recovery and what was the part with a custom nandroid backup? Can I run someone else's nandroid?
And if I put S-OFF on it, I can flash an older version of RUU right?
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
sorry for the confusion, this was not steps to follow (1-2-3-4) but either 1 or 2 or 3 or 4
if you go for option 2, yes you can flash older ruu.
for option 3, yes you can flash someone else nandroid, but it must be for your phone variant (sprint) and the ideal nandroid backup should be the same OS version.
---------- Post added at 02:34 PM ---------- Previous post was at 02:29 PM ----------
dougeedug said:
I'm pretty sure that in order to S-off you will need to be booted up first?
Click to expand...
Click to collapse
Right, you need a booted rom to s-off. (at least for the M7_UL dont know for the srpint variant)
The good news is that you can flash the full factory RUU with a s-on boot loader locked device so you may need to figure out how to do that first.
Click to expand...
Click to collapse
Not exactly, you can only flash ruu with a s-on device (and locked/relocked bootloader) if the ruu is same of higher version. In that case the OP need to find another ruu (if any available)
Yeah, I have a 4.2 image when loading RUU, therefore I'm not able to use an RUU.
So what else do I need to do?
And I do have an adb and fastboot environment set up, yes.
Should I instead just S-OFF It, put a custom bootloader on it and then flash a custom recovery?
Yes if you can achieve s-off you can put any RUU you want on it and that will rule out software issues.
Okay so I unlocked it.
However I looked online how to do S-OFF and all the articles I found said the phone has to be on an functional to enable USB debugging mode and to run the appropriate programs to make it S-OFF.
Is there any other way to do it?
Now that you are bootloader unlocked, flash a custom recovery and from there a rom. That should get you back to life so you can proceed however you wish.
I have a custom recovery.
TWRP 2.6.0.0 or something. And I loaded into it and my phone got stuck and the touch wouldn't work. It says "slide to unlock" and sliding doesn't work.
What do I do now? I can't even reboot the light keeps flashing and I even tried under a bright light and still nothing.
I'm letting the battery die to restart. When u do restart it, what do I do about the bad bootloader? Can I just put another one on there? I want Philz now after that terrible experience.
technocrat7 said:
I have a custom recovery.
TWRP 2.6.0.0 or something. .
Click to expand...
Click to collapse
This is very alarming! Be double sure you are flashing exactly what you need. The CWM you would need is 6.0.4.8 found on this page. I'm not sure what TWRP version is suitable as I don't use it. I don't dislike it. I have used it and it has worked.
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
We will have to see what it does after you let it die. The way your phone is acting is not good. Unfortunately, we must keep in mind that it may be a hardware fault causing all of this from the start. If it will still charge offline, then you'll get a chance to see if you can power it up into the bootloader and get fastbootUSB.
technocrat7 said:
Can I just do the same thing I did before to install a custom recovery?
Will it override the one I have currently?
Thanks!
Click to expand...
Click to collapse
why are you waiting for it to die ? if you want to get out of recovery and tough isn't working, just hold down the power button and the volume down until the lights on the bottom flash 10 to 15 times, when it goes off, release the power button but continue to hold the volume down, you are now in the bootloader, or should be.
and yes, if you flash another recovery it will overwrite the one that's on there, unfortunately, most rom's require TWRP
---------- Post added at 03:28 AM ---------- Previous post was at 03:22 AM ----------
I also just noticed you have the Sprint M7, you cant use the normal recoveries or rom's, they wont work, you need to use the ones built for your phone, which is different to the normal gsm version.
I would try twrp 2.6.3.3 or this http://mdmower.cmphys.com/twrp-m7spr/ a newer custom compiled twrp so your os version dont get wiped on bootloader.
Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?
technocrat7 said:
Dang, being with Sprint complicates things?
So will that one be safe to put on my phone? And that means I can't get Philz huh?
Click to expand...
Click to collapse
No it doesn't complicate things, it's the same procedure, it's like with anything, you just have to make sure you get the right files. Your phone is cdma not gsm.
---------- Post added at 04:28 AM ---------- Previous post was at 04:17 AM ----------
http://forum.xda-developers.com/sprint-htc-one?nocache=1&z=1858146956656128
You can find all of those right files there
Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.
technocrat7 said:
Okay thank you!
It is unlocked, rooted and had a custom recovery on it!
Now the last thing I need help with is, getting S-OFF because I still can't boot up the phone.
So now I just need to get S-OFF and then flash a custom ROM image on there and flash a custom image on it or something.
All I see when it boots up is the HTC screen.
Click to expand...
Click to collapse
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions
Seanie280672 said:
You need a working Rom on it to go s-off, all s-off tools are run from an android booted phone, so download a Rom of your choice, in your case a sense Rom, make sure you get it from the link I supplied earlier for your particular phone, move it to the same folder where your adb and fastboot are on your computer, boot your phone into recovery (main screen only, no sub menus) and plug it into your computer, the type
adb push NAME_OF_ROM.zip /sdcard/
Takes a while so be patient, the command window will let you know when it's done.
Unplug your phone and in recovery select install, select your Rom from the list and follow the instructions
Click to expand...
Click to collapse
So there's a slight problem.
"ADB Devices" doesn't show anything, it says "Devices not found"
The reason I would say is because it does not have USB Debugging enabled.
And I can't get into the phone to enable it because i'm not at that point yet.
Is there anything else I can do besides "adb push" to get the file on there?
Fastboot stuff works fine.
I went to the link you provided and found CynogenMod 11 I wanted to put on there.
After looking inside of the ZIP I downloaded there's a .img file inside called "boot.img" can I do anything with that?
Thanks!