SOLVED [Q] Please Help! Soft Bricked Gt-N7000 stuck in boot loop - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?

annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...

annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.

Jackwu696 said:
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Click to expand...
Click to collapse
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.

annie22 said:
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
Click to expand...
Click to collapse
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority

Azeazezar said:
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
Click to expand...
Click to collapse
I read the entire C-ROM tutorial, before doing anything.

Jackwu696 said:
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Click to expand...
Click to collapse
No i dont remember it...

annie22 said:
No i dont remember it...
Click to expand...
Click to collapse
Then I suggest you fix that port so you can use odin, otherwise follow @Azeazezar advice

annie22 said:
I read the entire C-ROM tutorial, before doing anything.
Click to expand...
Click to collapse
Follow these instructions.

Azeazezar said:
Follow these instructions.
Click to expand...
Click to collapse
Ohh, , okay will do.

@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.

treacherous_hawk said:
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
Click to expand...
Click to collapse
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..

annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
You should be able to flash raw kernel from just about any custom recovery. Just skip philz

Azeazezar said:
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Click to expand...
Click to collapse
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
The links work fine here.
If you have trouble I could send you a copy.

Azeazezar said:
The links work fine here.
If you have trouble I could send you a copy.
Click to expand...
Click to collapse
Yes I'd really like that mate. Gonna DL it 1st thing tomorrow. Just the raw5 will do. Thanks again for your trouble
Sent from my GT-N7000 using XDA Free mobile app

annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
Can't search, Can't help.

annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
if you r on cwm based or any custom recovery
goto android development page download forest cm11 kernel and flash it have latest philz recovery
if you are on stock
then
got original android development page >philz*******>download odin flashable md5> flash>install forestcm11 kernel> install c rom or any other
i dont know why u people search for single when you have an alternate
thanks to @forest1971

Flash success!!!! Bricked no more.
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional

annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread by adding [SOLVED] to let others know and also as reference to others facing the same problem.
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread title by adding [SOLVED] to let others know and also as reference to others facing the same problem.

Related

[Q] Able to get into recovery mode, but nothing appears after Samsung logo

[PROBLEM SOLVED] I flashed the custom ROM directly and everything is up and running! Details are below Thanks everyone!
==========================================================================================================================
Experts please help!
I have been surfing my whole day trying to root my Note I (N7000) and flash a custom ROM.
My kernal is XXLSF and I flashed PhilZ-cwm6-ZCLSF-CHN-5.08.5-signed.zip.
I rebooted it after flashing. The Samsung logo appears but then, it blackens and nothing appear on screen.
Now, I can get into the recovery mode by pressing the volume up, power and home button.
I am planning on flashing a stock ROM from SamMobile. Is it okay? WIll I brick my device? What should I do?
I am so frustrated right now:crying:
Your help is much appreciated. Thank you!
"http://forum.xda-developers.com/showthread.php?t=1746794"
From this post, "None since I switched to the CWM4 and CWM6 recoveries (no more superbrick risks under 4.0.4 ICS kernels, only CWM5.x was affected)"
Should I flash a stock ROM that is under 4.0.4, but not the lastest 4.1.2?
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
nokiamodeln91 said:
What is the XXLSF kernel? May be you flashed an incompatible kernel. Yes you can boot into download mode and flash stock rom.. It will boot up the device again.. Before rooting next time, read instruction more carefully.
If you were intending to flash a custom rom, you can do it without flashing a stock rom as you have access to recovery. In the recovery mode, select mount USB storage>connect to PC.. drives will appear. then place the custom rom zip file on to phone. In recovery mode, choose clean before New rom install and then flash the new rom.
Click to expand...
Click to collapse
Thank you so much for such prompt reply!!
Really? I can flash a custom ROM without root access?
THANK YOU!!!
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
nokiamodeln91 said:
You dont need root access to flash a custom rom.. Just CWM recovery which you should have after flashing Philz kernel,
Click to expand...
Click to collapse
Yes! I do have CWM recovery
Should I flash stock ROM and then flash the custom rom([ROM][JB 4.3][AOSPA][AOKP-MR1][CM10.2]P.A.C True All in 1 ROM[Nightlies])?
because I have never updated my Note I, the kernal version is very old.
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
nokiamodeln91 said:
The kernel now is not OLD as its now updated to Philz. You can directly install the PAC rom.
Click to expand...
Click to collapse
Thank you for keeping an eye on this post!
I encounter a problem during flashing the custom rom :crying:
Besides, I can't find the option "Format system" while following the steps to flash the custom ROM
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
nokiamodeln91 said:
Ok.,.. then get any one of the CM kernels first from here,.,http://forum.xda-developers.com/showthread.php?t=1789397
flash the CM kernel first.. then reboot recovery and flash the rom again..
format system data cache and preload are under mounts & storage menu
Click to expand...
Click to collapse
AMAZING!!!!
I have finally and successfully boot into my device after nine hours battle with my note I :silly:
But the last eight hours was nothing when comparing with your BIG HELP!
What's weird is that all my photos and data are present
I am 100% sure that I wiped all the data and cache and format data cache
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
nokiamodeln91 said:
Anything on the internal SD card that you stored using camera or music or videos will not be erased doing a factory reset. For that you will need to choose..format /emmc in the recovery mode. /data is one that app stores on the phone.
Click to expand...
Click to collapse
"UI system is forced to stop" appear continuously after changing language from English to Chinese.
Is it true that changing system language will lead to breakdown of system?
THANKS A MILLION!!
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
I have not used any language other than English. So you may need to ask in the PAC ROM thread.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Understood!
Thank you very much for helping me all along! :fingers-crossed:
Please accept my genuinely gratitude for helping a stranger like me!:highfive:
I LOVE YOU!
:thumbup::thumbup::thumbup:
Sent from my GT-I9500 using xda premium

[Q] How to UnBrick galaxy n7000

Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet

Odin stuck on Nand write

Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Moved to a new thread in Note Q&A
JoeyLohstroh said:
Hello,
I have the Samsung N7000, but it is stuck on Odin too.
My phone is not bricked or something like it, but I want Clockworkmod recovery 6.0.4.5 on it so I can flash Cyanogenmod 11 KitKat on it.
It is stuck on NAND WRITE too. I already have Clockworkmod recovery 6.0.2.8 on it, so I need to upgrade it.
Any suggestions??
Best regards, Joey
Click to expand...
Click to collapse
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
nokiamodeln91 said:
You have not mentioned the file you were trying to flash.. No mind readers here...
Anyways, flash raw kernel from the current recovery and reboot recovery.
Click to expand...
Click to collapse
Sorry, I tried flashing Clockworkmod 6.0.4.5 tar.md5 file.
It ran till it said NAND WRITE START and than FAIL. The collor above turned red and instead of PASS it said FAIL!
So raw kernel should fix this?
Do you have a link maybe? I'll search for it on Google but I want to make sure I have the good file.
Edit*
I found what you told me, but it says that raw kernel is for Android 4.4?
http://forum.xda-developers.com/showthread.php?t=2397000
I have 4.1.2 so I'm not sure if this will brick my device or something like that.
My device is all working fine and it is not bricked or bootloop YET, and since it has that NAND WRITE fail I'm not sure if it will reinstall my stock rom.. if it may brick.
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
nokiamodeln91 said:
I will still say what I wrote above.. Flash raw r4..reboot recovery and flash kk rom.
Click to expand...
Click to collapse
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
JoeyLohstroh said:
Allright, but I don't need to upgrade my cwm then? Because on several websites are telling me that I need at least Philz touch CWM 6.0.4.3 on it..
Click to expand...
Click to collapse
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
nokiamodeln91 said:
1. To flash a kitkat rom you will need a recent Cwm recovery.
2. Philz tw kernel are not updated to latest cwms.
3. If you try to flash philz_touch_xxx.zip, it won't work as you already saw.
So if you want to root the phone, use philz tw kernel that is associated with a rom build number like XXLTA.. Then you will get Cwm but not recent enough flash kk. That's why you flash raw r4.reboot into recovery takes to to recent Cwm. From there you can flash kk..
Just note that r4 is for 4.3 and will not boot a 4.1.2 so you will need to flash kk after r4.
Click to expand...
Click to collapse
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
JoeyLohstroh said:
Aah like that. But I think that I need Raw kernel R5 than? Because KitKat is Android 4.4
And when I flash raw kernel, than I should be able of flashing newest Cwm?
Click to expand...
Click to collapse
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
llawarta said:
Hi,
Is not possible to flash recovery without kernel, on recent samsung phones recovery and kernel are tied. (Maybe you can change recovery editing the kernel image but that is out of subject and maybe your skills).
Follow the steps @nokiamodeln91 suggest you, there is no other way. Raw Kernel has a KK compatible recovery.
Click to expand...
Click to collapse
Okay. But if KitKat doesn't work that well, do I need to downgrade my Kernel and Cwm recovery than?
And do you have a link to the stock kernel?
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
nokiamodeln91 said:
Then you go into recovery, wipe data, and flash anew rom using odin or use recovery to flash a custom rom.
Click to expand...
Click to collapse
But do you know/have a link to the stock kernel?
Just in case..
JoeyLohstroh said:
But do you know/have a link to the stock kernel?
Just in case..
Click to expand...
Click to collapse
No, and what will you do with the stock kernel?
nokiamodeln91 said:
No, and what will you do with the stock kernel?
Click to expand...
Click to collapse
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
JoeyLohstroh said:
If cwm doesn't want to instal KitKat, because of some reason, or I decide to not install it, than I want to reboot 4.1.2 but because of the Raw Kernel that won't be possible.
Click to expand...
Click to collapse
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
nokiamodeln91 said:
LOL that does not make any sense.. You will need to restore the backup or install a new rom. There is no need to separately install a stock kernel.. May be you need to read more how all this works.
Click to expand...
Click to collapse
Well, I didn't know that you sometimes need another kernel before you can install cwm.
I have been installing custom roms en recoverys many times on LG's so that isn't the problem.
But the NAND WRITE and FAIL problem must be a kernel issue than?

[Q] CM11 + CWM on GT-N7000

Hi Guys. short (and maybe dumb) question but i have to be sure before messing up the phone of my friend.
I would like to flash CM11 nightlies with clockworkmod on a Samsung Galaxy Note GT-N7000.
I have read several tutorials for flashing the GT-N7000 and i'm not sure which is the best way to do it.
It is neccesary to update or change the (current stock) kernel? Or is it possible to just copy the recovery and ROM to the SD card, boot into download mode, install from there?
Sorry i only have experience with flashing my HTC One X.
Thanks in advance,
Greetings
I am in the same possition. A friend of mine wants to help him install a custom rom to his n7000.
He has the stock samsung rom and the phone is LAGGY!!
I only have experience with flashing cm11 to my own galaxy s3 with philz touch recovery.
I am reading for 4 hours now and i am lost...
Should i only use TWRP?
but twrp has a version only for cm 10...(i havent found by searching any cm11 twrp version for n7000)
Should i use cm 10 then and all is ok??
Thanks a lot
I am reading things about installing kernel for recovery (philz touch)
After installing that, its just wipe data / cache and install Rom from Zip.
Im still bit confused about the rooting process -> Trough Zip or trough Odin.
I hope some1 can help me.
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
User_99 said:
First you need root. Then you can flash a custom rom.
To root your device tgere a several ways possible. All written here in sticky threads.
Easy way via Philz Kernel. You will get custom recovery and root in in step. What Rom is currentky installed? Last five digits are enough.
Click to expand...
Click to collapse
Stock rom is currently installed. I uploaded a picture with the specs within an attachment
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
User_99 said:
Search for XXLTA Kernel in PhilZ thread and flash this one. All written in PhilZ thread. After that take your new Rom an follow the instructions in the thread again. For CM 11 you need also Raw4 kernel first. Only after that flash the custom rom. But that's all written 100000 times here....
Click to expand...
Click to collapse
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
you also need gapps
eveles said:
you also need gapps (and maybe for later use one custom kernel )
Click to expand...
Click to collapse
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
hosseltietjes1990 said:
Yes i know, to install play store and other applications. But for the flashing part, that is enough right? The kernel, ROM and Philz Recovery?
Click to expand...
Click to collapse
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
Restore instructions :
I don't know if CWM recovery takes he same path to backup as Philz recovery but if it does it pretty simple
- just reboot to recovery and do the steps a to d from the above installation steps and restore backup
But in case you are not able to find backup file in CWM then do this
- reboot to recovery
- flash Philz kernel (same one you flashed during installation )
-go to advanced and select "reboot recovery"
- now you should be in Philz recovery again
- do steps from a to d again and restore
Simple
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes that is enough but gapps are usually installed right after the ROM so having it together with the other files is a good idea.
- transfer ROM, Kernels to internal or external SD.
- flash Philz JB kernel compatible with your device [ follow the instruction in Philz kernel thread on how to flash with no yellow triangle ] and reboot then verify that root is working (just try and give a file explorer root access or install an app like root checker from playstore)
- Once root is verified reboot to recovery (you should now be in philz touch recovery) I recommend you take a nandroid backup but the choice is yours
- Wait for the backup to complete or if you are skipping backup then
a) wipe data factory reset
b) wipe cache
c) format system by going into mounts and storage
d) wipe dalvik cache
- flash raw kernel and reboot recovery.
- Now in TWRP recovery (you can again choose to do steps a to d which is totally optional) find and flash the ROM you want
- flash gapps
- reboot
That should do it
and now just in case you don't like what you flashed you can always go back to your ROM if you took a nandroid backup as suggested in the installation steps
hope it helps
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
hosseltietjes1990 said:
Very clear! Thank you very much. Sorry for being a noob with this but it i think you cant be too sure when you are flashing kernels. Got my Nexus S bricked once while i was flashing a custom kernel.
And i dont have any experience with flashing samsung phone. Only HTC.
Thanks again and have a good day!
Click to expand...
Click to collapse
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
oh and btw let me tell you that recovery and kernel are in the same partition for N7000 so you can't have "this kernel and that recovery" here as you would in other devices. Thus if you need a certain recovery then you have to flash a certain kernel and if you need a certain kernel then it will install the recovery that comes with it overwriting the previous one. Also even if you flash just recovery somehow, the device will restore the one with the kernel upon reboot
So yeah
REVENGE SOLVES EVERYTHING
tysonraylee said:
I was in the same boat 2 years ago so i understand the situation I am glad i could help and if you are coming from nexus I am pretty sure you won't have any issues at all. Just one or two flashes and you will know everything
and who knows I might need your help one day as I am thinking of buying the N6 myself
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
I just recently flashed my HTC one X And the One X of a friend of mine. No need there to flash the kernel on that phone, only recovery trough adb and flash rom. So i really dont wanna mess with kernels
I you would like to ask something, feel free to ask! Thanks for the support
hosseltietjes1990 said:
Thank you for your reply.
I now have:
- PhilZ-cwm6-XXLTA-ATL-5.15.0
- raw_kernel_r4_j43
- cm-11-20141207-NIGHTLY-n7000
am i good to go?
Click to expand...
Click to collapse
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
The kernel code name should match the currently installed TW rom (4.1.2) or should it match the CM11 rom you intend to flash (4.4.4)????
to answer my own question : In XxPixX's quide of course it says r5 so 4.4.4 )
Anyway the kernel that you have downloaded is neither r5 nor r1 (i beleive that r1 is for 4.1)
Thanks, i hope someone with more experiense would clarify that!!
eveles said:
In the guide below
http://forum.xda-developers.com/showthread.php?p=53346482
it clearly says ''-Download Raw Kernel r5 and copy it to either your internal or external memory''
You have downloaded raw_kernel_r4_j43
Why is that?
Am i missing something?
My friend's n7000 runs on 4.1.2 as well and my goal is to install cm11 as well.
Saying that, which is the appropriate raw_kernel???
thanks!!!!!!
Click to expand...
Click to collapse
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
the kernel code name should match the ROM (4.1.2) the one you currently have. Download the philz JB kernel for your JB ROM(follow the steps given in philz kernel thread)
There is no requirement as such for 4.4.4 ROM
REVENGE SOLVES EVERYTHING
tysonraylee said:
yes you have to download raw kernel because CM 11 or Android Kitkat requires SE Linux compatible recovery and raw kernel is the one that has this compatibility.
If you skip raw kernel then installation will fail giving you "status 7 installation aborted" error.
Downloading the latest Raw kernel for KitKat should do it just read in the kernel thread and download the latest one for kk.
REVENGE SOLVES EVERYTHING
Click to expand...
Click to collapse
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
The download link you have provided links to r6 not r5
r6 says that is only for omniron 4.4
We were talking about cm11.
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
Oh i'm sorry haha. R6 should work right?
edit: sorry i did not read properly. r5 it is then
hosseltietjes1990 said:
Oh i'm sorry haha. R6 should work right?
Click to expand...
Click to collapse
No.
r5 should work.
Dude you are more confused than i am!!
hosseltietjes1990 said:
Raw Kernel 5 (download link: http://ge.tt/5fBuPYn1/v/1?c ) is the good one right. Think that should do the trick. I see some people just flashing the philz touch cmw, and then the Rom, without the kernel. Several video's on youtube confirming that. So It's quite confusing 20 people explaining how to install CM11 and root on Samsung Note GT-N7000
Click to expand...
Click to collapse
yes that should do it, download the k44 one
I haven't seen any videos about that but it is possible to do so but that's just using the recovery temporarily to flash a certain ROM but in the end that recovery is replaced by the ROMs kernel recovery its the same thing we are doing by using raw kernel here in these installation steps but its true that it gets a little confusing
I have updated my previous reply. Please refresh the page to see the explanation
eveles said:
The download link you have provided links to r6 not r5
Click to expand...
Click to collapse
R6 is the latest version. Please download the R6-k44.zip
REVENGE SOLVES EVERYTHING

Format and Fresh Install GTi9070

Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.

Categories

Resources