Database Develop

Update Stuck

Hi everyone,
I'm having an issue updating my wife's rooted and unlocked HTC One.
I flashed stock recovery for the process to go smoothly but the update is always stuck at roughly 25%. I switch off the phone, it tries again and gets stuck again at 25% with a red mark.
I tried deleting the update and downloading it again through the GUI without luck.
I suspected 3rd party mods like the battery percentage hack, but it still didn't work after reverting it.
P.S. I also have an HTC One, had an issue updating because I had CWM, but the update worked like a charm when I flashed stock recovery.

Any clues?

Bump

1. where are you flashing the update from? - is it a zip file or is it the one the pone received OTA?
2. Which recovery are you using?
3. Which Rom are you on?

htc one soft bricked - needs help!!!

Hi, guys
Im done something wrong to my htc one, what I done so far:
unlocked bootloader
CWM
then install CM10.2
Im thinking to reverse back to stock, then i did thru 'Hasooon' locked bootloader, flash RUU (was incorrect one)...
and now I can only access to FASTBOOT & CWM, then i did boot into sys, it will show CM classica boot anime but it will stuck and keep rebooting
I tried to find any 1.29.980(my currect firmwarm version) RUU but canot find anything available so can anyone provide me a link so i can download the RUU file wt 1.29.980
or what I can do so can bring the phone back to normal again...
thanks heaps guys.

skimboynemo said:
Hi, guys
Im done something wrong to my htc one, what I done so far:
unlocked bootloader
CWM
then install CM10.2
Im thinking to reverse back to stock, then i did thru 'Hasooon' locked bootloader, flash RUU (was incorrect one)...
and now I can only access to FASTBOOT & CWM, then i did boot into sys, it will show CM classica boot anime but it will stuck and keep rebooting
I tried to find any 1.29.980(my currect firmwarm version) RUU but canot find anything available so can anyone provide me a link so i can download the RUU file wt 1.29.980
or what I can do so can bring the phone back to normal again...
thanks heaps guys.
Click to expand...
Click to collapse
Go here, scroll down to nandroid backups, and find yours. There are two, one unbranded, one for Optus. Since you're running cwm, you can flash these backups and they should return you to stock.

kibmikey1 said:
Go here, scroll down to nandroid backups, and find yours. There are two, one unbranded, one for Optus. Since you're running cwm, you can flash these backups and they should return you to stock.
Click to expand...
Click to collapse
I used CWM to sideload another rom, and now Im back on GE rom again.
and I download the Nandroid backup and copy into my internal memory, loaded into CWM then went into back n restore option, but just cannot find the find the zip file so cannot do the restore back to stock at the stage? so was wondering any particular folder I need to place the zip file so the CWM can regonise?
thanks.

[Q] Nothing present after custom ROM install

I have spent a day and a half trying to fix all of my issues before I finally turned here but I am at my wits end.
This all started with my attempt to flash Viper to my HTC one. I installed clockwork touch loaded Viper to the drive and went to install. During the install process something happened and my install failed. When I rebooted the phone it returned to the fasboot screen and there was no recovery present. I had heard that sometimes TWRP works better for installing some ROMs so I decided to switch courses and try that. Before installing I went and formatted cache, data, ect. When I tried to install Viper this time it appeared to be a successful install. However, I was once again I was returned to the fastboot screen and no recovery was present. I tried this a few more times with either clockwork or TWRP using sideload with no luck. I also trried using fastboot to flash a sprint stock recovery boot and image. When the phone rebooted it showed the white HTC Screen but nothing happened for a half hour so I restarted the phone again only to be dropped into the fastboot. I also tried locking and unlocking the boot loader and tried a Sprint HTC one RUU with no success.
So at this moment this is where I stand:
I am on the fastboot screen with no recovery.
HBOOT 1.56.0000
S-ON
Any help you can provide would be GREATLY appreciated. Thanks for your time.

Betraythesway said:
I have spent a day and a half trying to fix all of my issues before I finally turned here but I am at my wits end.
This all started with my attempt to flash Viper to my HTC one. I installed clockwork touch loaded Viper to the drive and went to install. During the install process something happened and my install failed. When I rebooted the phone it returned to the fasboot screen and there was no recovery present. I had heard that sometimes TWRP works better for installing some ROMs so I decided to switch courses and try that. Before installing I went and formatted cache, data, ect. When I tried to install Viper this time it appeared to be a successful install. However, I was once again I was returned to the fastboot screen and no recovery was present. I tried this a few more times with either clockwork or TWRP using sideload with no luck. I also trried using fastboot to flash a sprint stock recovery boot and image. When the phone rebooted it showed the white HTC Screen but nothing happened for a half hour so I restarted the phone again only to be dropped into the fastboot. I also tried locking and unlocking the boot loader and tried a Sprint HTC one RUU with no success.
So at this moment this is where I stand:
I am on the fastboot screen with no recovery.
HBOOT 1.56.0000
S-ON
Any help you can provide would be GREATLY appreciated. Thanks for your time.
Click to expand...
Click to collapse
You probably should RUU and stay over.
Sent from my Slim Photon using xda app-developers app

So I have my phone up an running on a stock RUU but I seem to have the same issues with and error when installing Viper. Any ideas as to what the issue could be?

Betraythesway said:
So I have my phone up an running on a stock RUU but I seem to have the same issues with and error when installing Viper. Any ideas as to what the issue could be?
Click to expand...
Click to collapse
... now that its up and running, i recommend you get s-off 1st. it eases many things. then flash twrp 2.7.0.4 recovery and try to flash viper :victory: ...

I was in this situation myself. If you can adb twrp recovery onto your phone. Dont try to flash viper with cwm it will mess stuff up. After you have a recovery loaded flash the viper rom. If it boots up be sure to check about phone section in the settings and see if there is a baseband version present. If not just flash the latest firmware and you should be good to go. This was what i had to do.

Same here, about a month ago. They really need to just remove that option to flash CWM. I managed to get a recovery installed, but now it seems like half the ROMs I try to flash won't boot. I don't even know what Rom I am using, because it has disappeared from XDA. It's a 4.4.2 Sense 5.5 ROM, and it is odexed and came with Xposed Installer. It's the only ROM that seems to work anymore, so I have to wonder if my firmware got messed up. I'm S-On, with no way to S-off for the foreseeable future until I can fix my laptop. Since my laptop is unavailable, I'm a bit hesitant to mess with the phone much more, since I can't fix it again without the computer.
Sent from my HTCONE using Tapatalk

I've read a number of these threads, and many have Viper in common. Viper by itself is an amazing ROM. Maybe too amazing... Incredible amount of customization. I have to remind myself occasionally that as much as I flash ROMs and lurk around here that I am not a dev.
I would do my best to achieve S-OFF if you have any plans for custom ROMs. It's always useful. I would also suggest trying one of the Sense 6 ROMs. They are all amazing.
Sent from my One using Tapatalk

S-OFF is necessary for some ROMs to work, although I'm not sure about Viper. Use firewater.

greywolf928 said:
S-OFF is necessary for some ROMs to work, although I'm not sure about Viper. Use firewater.
Click to expand...
Click to collapse
I am very sorry I know this is a slow response. So I tried to first root my phone so I could use firewater but I ran into issues. First, I tried to place supersu on the internal hard drive via windows but when I rebooted into recovery I was not able to find any of the folders I had access to. So i tried using side load but got errors that I could not mount cache and could not mount system. Do you have any suggestions on how to proceed?

[Q] need help hope i didnt kill my m7 :(

Last night I was flashing to a new rom.
The phone has had beanstalk 4.4+ on it for quite some time and have never had any issues really.
I was going to give viper 6.1 a shot so I downloaded the zip and put it on my sd card
I rebooted the phone into recovery as I do every time I load a rom and selected wipe to install nee rom option in twrp.
I chose the zip and aroma fired up and installed the new rom and gave me a successful install message and asked to reboot the phone which I did.
Now when I boot the phone it goes straight to the bootloader/fastboot screen and will not perform any functions other than reboot, which it does and goes straight to the bootloader.
pleaseeee help I hope I didn't kill it somehow. It seemed everything was going fine...
Thanks in advance
Jay

makeshiftballer said:
Last night I was flashing to a new rom.
The phone has had beanstalk 4.4+ on it for quite some time and have never had any issues really.
I was going to give viper 6.1 a shot so I downloaded the zip and put it on my sd card
I rebooted the phone into recovery as I do every time I load a rom and selected wipe to install nee rom option in twrp.
I chose the zip and aroma fired up and installed the new rom and gave me a successful install message and asked to reboot the phone which I did.
Now when I boot the phone it goes straight to the bootloader/fastboot screen and will not perform any functions other than reboot, which it does and goes straight to the bootloader.
pleaseeee help I hope I didn't kill it somehow. It seemed everything was going fine...
Thanks in advance
Jay
Click to expand...
Click to collapse
... TWRP is the best recovery to flash Viper. If you didnt use that, flash the right TWRP for your variant in fastboot (Sprint in your case and no other), boot into recovery, wipe everything in recovery, run Viper installer, choose wipe all (except SD) and then see if it wakes from the sleep :laugh: ...

makeshiftballer said:
Last night I was flashing to a new rom.
The phone has had beanstalk 4.4+ on it for quite some time and have never had any issues really.
I was going to give viper 6.1 a shot so I downloaded the zip and put it on my sd card
I rebooted the phone into recovery as I do every time I load a rom and selected wipe to install nee rom option in twrp.
I chose the zip and aroma fired up and installed the new rom and gave me a successful install message and asked to reboot the phone which I did.
Now when I boot the phone it goes straight to the bootloader/fastboot screen and will not perform any functions other than reboot, which it does and goes straight to the bootloader.
pleaseeee help I hope I didn't kill it somehow. It seemed everything was going fine...
Thanks in advance
Jay
Click to expand...
Click to collapse
try to run a RUU... it will fix all the problems... i had the same problem on my sprint htc one few weeks ago it didnt have a rom in it, only thing it could do was going into bootloader and TWRP... after RUU no problems...root again and install custom rom of your choice...:good:

praveensk.rcb said:
try to run a RUU... it will fix all the problems... i had the same problem on my sprint htc one few weeks ago it didnt have a rom in it, only thing it could do was going into bootloader and TWRP... after RUU no problems...root again and install custom rom of your choice...:good:
Click to expand...
Click to collapse
do i need to install a rom after the RUU? reason I ask is I ran it and everything went smoothly but the phone wont boot now it shows the htc screen and then goes black. the phone is not turning off but it is crashing it seems.
I have relocked my bootloader and successfully have the latest twrp back on the phone

makeshiftballer said:
do i need to install a rom after the RUU? reason I ask is I ran it and everything went smoothly but the phone wont boot now it shows the htc screen and then goes black. the phone is not turning off but it is crashing it seems.
I have relocked my bootloader and successfully have the latest twrp back on the phone
Click to expand...
Click to collapse
there is no need to put a rom as long as you are satisfied with stock rom.... how did you run the ruu .exe file or by fastboot mode???

Got it! Something must have failed. I ran the .exe ruu again and we are up and running! Thanks everyone

makeshiftballer said:
Got it! Something must have failed. I ran the .exe ruu again and we are up and running! Thanks everyone
Click to expand...
Click to collapse
:good::good::good::good::fingers-crossed::fingers-crossed:

[Q] ROM flash gone wrong. HTC one M7

Hi,
Looking for some help from you guys if possible. I have have been flashing Android HD Roms by Mike1986 for some time now on my HTC One (M7). Last updated to HD-One_91.1 to upgrade to Lollipop. Experienced very poor battery performance so looked to flash back to an earlier Kitkat version. Instead of flashing a previous one, I thought i'd give the Google 6.1_GE a go and see what that was like.
Big problems. Phone kept getting stuck in boot loop - so eventually i decided to wipe the phone and start again. Now when I switch phone on It boots into the start screen for Goggle edition then reboots constantly.
As I wiped the patition, I do not have the option to reinstall even the Lolipop ROM.
My phone wont stay on long enough to copy another ROm over. so Im stuck with a pjone that keeps switiching off before I can do anything with it.
I use TWRP recovery but when i try Factory reset etc, same problem occurs.
How can I get another compatible ROM onto the phone or am I stuck with a knackered phone?
Any advice greatly appreciated.
Thanks in anticipation.
DrG.

DrGunlove said:
Hi,
Looking for some help from you guys if possible. I have have been flashing Android HD Roms by Mike1986 for some time now on my HTC One (M7). Last updated to HD-One_91.1 to upgrade to Lollipop. Experienced very poor battery performance so looked to flash back to an earlier Kitkat version. Instead of flashing a previous one, I thought i'd give the Google 6.1_GE a go and see what that was like.
Big problems. Phone kept getting stuck in boot loop - so eventually i decided to wipe the phone and start again. Now when I switch phone on It boots into the start screen for Goggle edition then reboots constantly.
As I wiped the patition, I do not have the option to reinstall even the Lolipop ROM.
My phone wont stay on long enough to copy another ROm over. so Im stuck with a pjone that keeps switiching off before I can do anything with it.
I use TWRP recovery but when i try Factory reset etc, same problem occurs.
How can I get another compatible ROM onto the phone or am I stuck with a knackered phone?
Any advice greatly appreciated.
Thanks in anticipation.
DrG.
Click to expand...
Click to collapse
Your phone must be s-off to use this rom like said in the OP. Also said that your phone WILL bootloop if you flash it without having s-off.
Android Revolution HD 6.1
Google Edition
You need S-OFF, otherwise you'll experience boot-loop!
You can't use ART with deodexed custom ROM
You need TRWP 2.6.3.3 custom recovery!
--- MD5 Checksum: 2A9CD96A42C79D64A7933ECE76AD84E6 ---​
Click to expand...
Click to collapse
Boot in recovery (twrp), push a rom to your phone using adb push, adb sideload or MTP (MTP only available on newer twrp versions) and then flash the rom.

alray said:
Your phone must be s-off to use this rom like said in the OP. Also said that your phone WILL bootloop if you flash it without having s-off.
Boot in recovery (twrp), push a rom to your phone using adb push, adb sideload or MTP (MTP only available on newer twrp versions) and then flash the rom.
Click to expand...
Click to collapse
Ahhhh!!!! RTFp eh? Well thanks for that. I'll try again and hopefully Will be ok.
Thanks for taking the time to reply.
Cheers
DrG