Database Develop

[Q] HELP! Battery died while flashing CM11 update

Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!

Raidorz said:
Hi guys,
Need some help as mentioned in the title. I tried flashing the RUU, 1.29.707.3, from fastboot but whenever it got to the HTC screen, after awhile it gives an error and I cant continue flashing. Please help!
Thanks!
Click to expand...
Click to collapse
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?

clsA said:
theirs no way we can help you with that little bit of information
when asking for help, you need to list your full phone information by posting the results from
fastboot getvar all minus your serial no and IEMI. What version of custom recovery did you have installed. Is you phone S-off ? How did you decide what RUU to flash ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If I'm not wrong it's CWM 6.0.4.3. And I downloaded the RUU based on my region before.
Sorry I'm still new about using forums!

Raidorz said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Remove Me
(bootloader) imei: Remove Me
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Sorry I'm still new about using forums!
Click to expand...
Click to collapse
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082

clsA said:
Please edit your post to remove the info I did
The reason the RUU failed is your S-On and you can't downgrade while s-on
Use this SuperGuide to get your self s-off and hboot 1.44.000 then try your RUU
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.

Raidorz said:
I cant boot up and when I try to use the Rumrunner method in fastboot in cant work.
Click to expand...
Click to collapse
Try this for s-off >> http://firewater-soff.com/

clsA said:
Try this for s-off >> http://firewater-soff.com/
Click to expand...
Click to collapse
Problem is I cant boot into android

Raidorz said:
Problem is I cant boot into android
Click to expand...
Click to collapse
sideload a rom like ARHD 31.6 and try

[Q] HTC One US unlocked 32 GB stuck on boot screen after OTA update

I got an OTA update on my HTC One US unlocked 32 GB version. The OTA update installed on the phone but the phone never booted up.
I went into the bootloader and tried factory reset but no success.
Now I want to flash my phone using RUU, but I am not getting correct RUU for my phone. I have unlocked the bootloader from HTCDEV website.
Details are :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.1540.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT367W910917
(bootloader) imei: 354439059958431
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-076e0e17
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I tried many RUU matching the mid and cid number of my phone for example : htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/ but it gave image error. Please help

still having trouble
do u have s-off if not when trying to flash a ruu you need to relock bootloader b4 running ruu

s_rupainwar said:
I got an OTA update on my HTC One US unlocked 32 GB version. The OTA update installed on the phone but the phone never booted up.
I went into the bootloader and tried factory reset but no success.
Now I want to flash my phone using RUU, but I am not getting correct RUU for my phone. I have unlocked the bootloader from HTCDEV website.
Details are :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.1540.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT367W910917
(bootloader) imei: 354439059958431
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4100mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-076e0e17
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I tried many RUU matching the mid and cid number of my phone for example : htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_brightstarus_wwe_4-19-1540-9_radio_4a-23-3263-28_10-38r-1157-04l_release_353887_signed_3-exe/ but it gave image error. Please help
Click to expand...
Click to collapse
That ruu should work for you but you are s-on, so as stated above you will need to relock to flash it.
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Then run the ruu while connected with fastboot usb. :good:
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

[Q] need help getting s-off to get to stock, version-main empty

Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull

francisb said:
Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull
Click to expand...
Click to collapse
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).

francisb said:
Hello,
As the title already states i a m looking for a way to get S-off so i can change the CID to a more general one and to go back to stock.
I tried several things like firewater, Rumrunner but all with no luck.
Maybe i am missing something or its because i am on bootloader 1.55, but i need some guidance, if its even possible with my phone.
The strange thing here is that the "version-main" information is empty...... maybe that can cause a problem?
I tried to change the version-main with the "echo "2.24.111.3 " | dd of=/dev/block/mmcblk0p19 bs=1 seek=160" command and restored the "M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3" backup i downloaded from htc1guru.com and the phone startsup and seems to work great i even recieved an update.
Her some info:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d2906a15
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
If a second HTC one can help with this, i have one extra who is not rooted and still stock.
I post the getvar informtion from that phone as well, maybe i can use this phone to bring the first phone on stock.
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4063mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So if someone can help me with this challenge i would be very thankfull
Click to expand...
Click to collapse
What errors did you get with firwater and rumrunner?
Your version main was/is blank because you've used a version of TWRP recovery that has the misc partition bug. It is only a cosmetic bug though and doubt it has any effect on the s-off process.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

majmoz said:
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).
Click to expand...
Click to collapse
Do you know wich ARHD version and Bulletproof kernel version?

Danny201281 said:
What errors did you get with firwater and rumrunner?
Click to expand...
Click to collapse
Rumrunner stops at pour 8 and tels to reboot and try again, i tried several times.
Firewater says firewater can not work on your device....
I am going to upgrade TWRP to solve the version-main bug...

Danny201281 said:
Your version main was/is blank because you've used a version of TWRP recovery that has the misc partition bug. It is only a cosmetic bug though and doubt it has any effect on the s-off process.
Click to expand...
Click to collapse
updated TWRP but still an empty version-main...

francisb said:
updated TWRP but still an empty version-main...
Click to expand...
Click to collapse
Version-main will remain empty until you flash another firmware package. As Danny201281 stated it is cosmetic. Did you update to TWRP 2.6.3.3?
---------- Post added at 07:33 AM ---------- Previous post was at 07:30 AM ----------
francisb said:
Do you know wich ARHD version and Bulletproof kernel version?
Click to expand...
Click to collapse
Use ARHD 53.0 or 62.0 and the current Bulletproof kernel. I would try ARHD with the stock kernel first before trying the Bulletproof kernel.
I would keep this site for future reference it has nandroid backups, OTA and recoveries of your version.

majmoz said:
Version-main will remain empty until you flash another firmware package. As Danny201281 stated it is cosmetic. Did you update to TWRP 2.6.3.3?
Click to expand...
Click to collapse
i updated to 2.8.1.0.

francisb said:
i updated to 2.8.1.0.
Click to expand...
Click to collapse
It's best to use 2.6.3.3 with ARHD roms. To avoid set_metedata_recursive errors when installing
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:

Well i installed TWRP 2.6.3.3 and ARHD 53.0. Then tried firewater en Rumrunner but no joy.
After that i looked at Bulletproof kernel but it seems s-off is needed to install that kernel.
Version-main is still empty...
So what can i do more?

francisb said:
Well i installed TWRP 2.6.3.3 and ARHD 53.0. Then tried firewater en Rumrunner but no joy.
After that i looked at Bulletproof kernel but it seems s-off is needed to install that kernel.
Version-main is still empty...
So what can i do more?
Click to expand...
Click to collapse
You need Bulletproof 14.1 to go with ARHD 53 and the kernel does not require s-off

majmoz said:
You can try firewater with various combinations of ROMs and kernels. Some have had success with ARHD and Bulletproof kernel. Should that fail, there is Sunshine S-OFF but it will cost a fee ($25).
Click to expand...
Click to collapse
Ok finally S-off by using Sunshine, changed CID to HTC__001
Thanks for all the help.

Now i am on os-5.11.1540.9 HBOOT-1.57m by flashing a RUU zip (WWE) for the correct CID and MID but.....
It downloads an OTA update but says; we have determined that your phone may be running a modified version of its system software.
Is this because i am still S-off?

francisb said:
Now i am on os-5.11.1540.9 HBOOT-1.57m by flashing a RUU zip (WWE) for the correct CID and MID but.....
It downloads an OTA update but says; we have determined that your phone may be running a modified version of its system software.
Is this because i am still S-off?
Click to expand...
Click to collapse
No ...STAY S-OFF no matter what
Your CID and Software are incorrect, 5.11.1540.9 is Developer Edition
HTC__001 is International .... What RUU did you use, and what did you do between flashing the RUU and getting the Update

clsA said:
No ...STAY S-OFF no matter what
Your CID and Software are incorrect, 5.11.1540.9 is Developer Edition
HTC__001 is International .... What RUU did you use, and what did you do between flashing the RUU and getting the Update
Click to expand...
Click to collapse
Wel i figured that something was wrong with the software. I installed a gurureset version and followed his instructions, did not go back S-on and OTA worked like a charm.
Thanks for all the help guys, together with your information i figure it out at the end.
Francis

How can i S-OFF my HTC ONE DUAL SIM W802 with fastboot

My HTC ONE is opening only in bootloader mode and i could not make turn the S-ON to S-OFF mode to install a rom could you help me please i'm new on HTC i used to have iphone
here's the only details i have
C:\Android>fastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.41.402.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3CD
(bootloader) imei: 351523
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
I would be appreciated it if anyone helped

Sunshine s-off is the only way and u have to buy pay 25$ for that. You don't need to be s-off to flash custom rom. Just flash kernel via fastboot and rom via recovery . simple.

Nett said:
My HTC ONE is opening only in bootloader mode and i could not make turn the S-ON to S-OFF mode to install a rom could you help me please i'm new on HTC i used to have iphone
here's the only details i have
C:\Android>fastboot.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.41.402.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3CD
(bootloader) imei: 351523
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.046s
I would be appreciated it if anyone helped
Click to expand...
Click to collapse
You dont need to S-Off to install Roms,you will need custom recovery and your bootloader unlocked,plenty of guides on here to take you step by step

Thank you shepppster
I have my bootloader unlocked but need to S-OFF my phone , is there any other way to do this than the sunshine

Nett said:
Thank you shepppster
I have my bootloader unlocked but need to S-OFF my phone , is there any other way to do this than the sunshine
Click to expand...
Click to collapse
your software is old you can try Rumrunner s-off

Rumrunner needs to be done through os but i am stucked in the bootloader screen.. Any suggestions please?

Nett said:
Rumrunner needs to be done through os but i am stucked in the bootloader screen.. Any suggestions please?
Click to expand...
Click to collapse
Flash a rom, you don't need s-off to flash a rom like said previously. Unlock your bootloader, flash a custom recovery and then a rom. Then if you need s-off (e.g. to flash a RUU) you can try to achieve it using rumrunner or sunshine.

Thank you Alray but do you know where can i get a ROM for this phone ,all the sites are asking to be S-OFF in order to flash your phone or this is what i found at least

Nett said:
Thank you Alray but do you know where can i get a ROM for this phone ,all the sites are asking to be S-OFF in order to flash your phone or this is what i found at least
Click to expand...
Click to collapse
This Rom is for dual sim http://llabtoofer.com/2014/07/31/htc-one-dualsim-maximushd-3-0-0/
Not sure if you meet the requirements with your phone currently,but it is specifically forr the dual sim.

Looking for correct RUU.exe

Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew

worf105 said:
Hello all XDA members,
I am looking for the correct RUU.exe for my HTC One M7. Its on Vodafone UK (VODAP001) and HBOOT 1.61.000 and is S-On. I have already relocked the bootloader and flashed the stock recovery back. I have found and tried many RUU.zip from here and HTC but I have learned that as I am S-on I am unable to go this route. This HTC One m7 was running a custom ROM and TWRP but since I am giving it my Father I needed it back to stock and ready to receive any OTA updates that Vodafone throw out.
Thank you all
Andrew
Click to expand...
Click to collapse
Can you please post the output of "fastboot getvar all" (hide your imei and sn before posting)
Will be easier to point you the correct RUU.
Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!

Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew

Btw is KatKiss 5.1 working fine? Haven't played with my tf101 for a while!
Click to expand...
Click to collapse
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101

worf105 said:
Thank you for your quick reply and as requested here is the output to fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.161.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: Sxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4154mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-92aee636
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Kind Regards,
Andrew
Click to expand...
Click to collapse
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
worf105 said:
Yes Lollipop 5.1 is working great and I have had no problems. Hopefully TimDuru will be presenting Marshmallow soon for the TF101
Click to expand...
Click to collapse
Its amazing how this dev is still supporting this device, will try to update :good:

Thank you alray
Will let you know how I get on with your instructions.
Ye TimDuru has done a great job in supporting the TF101. If he never I would have bought another tablet years ago.
Kindest Regards,
Andrew

I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew

worf105 said:
I worked a treat, thank you alray for your expert help in this matter.
Gratefully yours,
Andrew
Click to expand...
Click to collapse
You're welcome :good:

alray said:
The latest RUU for that version is 7.18.161.21. Since your phone is S-ON you can only flash RUU that are the same version or higher than your actual version (7.18.161.30). There is a way to bypass this. Go to this thread and read at the end of my post (post #2) under "how to downgrade with s-on". Once done and your version-main is showing 7.18.161.2 instead of 7.18.161.30 , flash the 7.18.161.21 RUU using instructions of post #1 (RUU file is at post #2). Don't forget to use the fastboot version provided at post #1, the normal fastboot version won't work to flash a lollipop RUU.
Its amazing how this dev is still supporting this device, will try to update :good:
Click to expand...
Click to collapse
hi do you can helme whith my HTC wls RUU :crying:

jhon8500 said:
hi do you can helme whith my HTC wls RUU :crying:
Click to expand...
Click to collapse
Yes, what is the problem?

alray said:
Yes, what is the problem?
Click to expand...
Click to collapse
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

jhon8500 said:
okay thanks for replying I have a htc one m7 wls I tried to install a rom of cyanogen but I could not install it I decided to return my htc to s-on with the intention of reinstalling the rom stock of factory but I could not find it the intetnado install by SDK but I get the error "error: device '(null)' not found" and by means of the installer of the ruu by means of .exe says it is not appropriate if you can help me I would appreciate this,
this information of my device:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA33YS901134
(bootloader) imei:xxxxxxxxxxxxx
(bootloader) meid: xxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3841mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Sorry for the delayed answer.
First, going back S-ON wasn't required and it's also a bad move. Having S-OFF can help a lot when troubleshooting your phone. I don't know what cyanogenmod rom version you tried to install (cyanogenmod roms are so old) but are you sure the one you tried was compatible with the M7_WLS variant? This phone variant will only work with custom roms made specifically for this variant and must also be flashed with a custom recovery compatible with WLS . Just saying because this is the most common error made by people having this phone variant.
Now, what ruu version are you trying to install? The one you need is 6.23.651.10 and can be found here:
http://dl3.htc.com/application/RUU_...99.2143463114.1556074529-999987239.1556074529
Don't forget that since you went back S-ON you now must have a locked or re-locked bootloader to install a RUU. It won't install if it's unlocked.
If not already done, you can re-lock your bootloader using fastboot from a command window using this single command:
Code:
fastboot oem lock
then install the RUU