Lightning kernel
this kernel is made for cyanogenmod 11 roms and i take no responsibility if you brick,destroy your device due to this kernel
features
sound control 3.2
gpu overclock to 627mhz
intelli thermal
cpu overclock upto 1836mhz(disable mpdecision)
compiled with linaro 4.9.1
added intelliactive,intellidemand,preservative,hyper,wheatley,lionheart governors
row,fiops,tripndroid io schedulers
undervolting
sweep to wake and double tap to wake
auto mpdecision (turn off stock qcom mpdecession)
sound stuttering fixed(zzz sound while hearing music)
Motorola MSM memcpy enhancements
cpu unallingnment access
kernel mode neon
exfat support
gpu voltage control
multi rom by Olivier (sony 233 blobs)
81mhz lowest cpu frequency
more to come
source code https://github.com/nikhil18/android_kernel_sony_apq8064
installation instructions
flash the zip in recovery
for extreme overclocking disable qcom mpdecision
Setting custom GPU Voltages via sysfs
NB:
- Safe lock is present on MIN/MAX values:
Quote:
#define GPU_MIN_VDD 900000
#define GPU_MAX_VDD 1200000
The default GPU voltages are:
Quote:
+ [VDD_DIG_NONE] = 0,
+ [VDD_DIG_LOW] = 975000,
+ [VDD_DIG_NOMINAL] = 1075000,
+ [VDD_DIG_HIGH] = 1175000
Verify the actual settings:
Quote:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
975000
1075000
1175000
Adjust to desired values and verify:
Quote:
echo "930000 1000000 1100000" > /sys/devices/system/cpu/cpu0/cpufreq/gpu_mv_table
compatible roms
carbon rom
beanstalk rom
AICP kk rom
aokp rom
cm11 rom
more testing needed
credits
doomlord for kernel building instructions
jeroenqui for meow kernel
thomas1991_12 for linux patches and features
cyanogenmod for kernel source
Tommy-Geenexus for guidance
faux123 - For almost all kernel features
BrateloSlava-for many features and guidance
naitik2012-for testing
twrp ramdisk-Angel bob
XDA:DevDB Information
Lightning kernel, Kernel for the Sony Xperia Z
Contributors
nikhil18
Kernel Special Features:
Version Information
Status: Testing
Created 2014-07-10
Last Updated 2014-09-22
changelog
sony 233 blobs.
version 0-initial release
version 1-added intelliplug,gpu overclocking,linux patch to 103,gpu simple governor,gpu voltage control,cd rom emulation .
version 2 - added lot of governors,f2fs support,exfat support and hopefully wifi fixed
version 3-added gpu overclock 627mhz,added tweaked CPU auto_hotplug driver,patches for improved CPU hotplug efficiency and at last finally wifi 100% fixed and this is the biggest update of this century
version 4-added kexec hard boot(multi rom) thanks to Olivier ,added multirom twrp recovery,fixed gpu simple governor,changed to xz compression.
version 5-fixed multirom,added row schedule and i have released two versions with autosmp and intelliplug.
version 6-added row sched,500ma charging for unknown chargers,fast charge,disabled some debugging for better performance,fixed sound stuttering if its there.
version 7 - added 81 and 270 mhz cpu frequencies,vfp hardfloat for better performance,set westwood tcp as default added many tcp congestion controls eg reno,highspeed,htcp,illinois,scalable and many more.
version 8-.283 blobs added,added interactive gpu governor,anykernel,fixed cd rom emulation,sound control 3.6 and for more you can check the commits.
downloads
Ok guys uploaded version 8 autosmp version here http://d-h.st/FwM enjoy
faq
Q1 low frequencies like 81mhz not sticking
Ans turn on frequency lock in trickstermod
Q2 if you are having random reboots?
Ans lower the max freq to 1512000 and increase the min frequency to 384mhz
nikhil18 said:
can any one please upload latest cyanogenmod boot.img so that i can extract the ramdisk and upload the kernel
Click to expand...
Click to collapse
http://www.infectedbuilds.net/downloads/yuga/cm_11/latest_boot_img/
Maybe this could help.
Very interesting. I'll test it as soon as you upload.
Can you add "true CD-ROM emulation interface" feature? DriveDroid is very useful for me.
version 1 uploaded
i dont have an xperia z so i am not sure it will boot or not
m0b said:
Very interesting. I'll test it as soon as you upload.
Can you add "true CD-ROM emulation interface" feature? DriveDroid is very useful for me.
Click to expand...
Click to collapse
i will try to add this if the kernel boots
nikhil18 said:
version 1 uploaded
i dont have an xperia z so i am not sure it will boot or not
Click to expand...
Click to collapse
It boots but GSM doesn't work (returns error while searching network). Everything else seems fine.
Tested on Beanstalk 4.4.4.001 which is based on CM11. I'll test on CM11 later if it's necessary.
m0b said:
It boots but GSM doesn't work (returns error while searching network). Everything else seems fine.
Tested on Beanstalk 4.4.4.001 which is based on CM11. I'll test on CM11 later if it's necessary.
Click to expand...
Click to collapse
thats a very old build try the latest cm
guys any one else having this problem
Graphic bugs (screen tearing when scrolling) and wifi not turning on on Thomas' CM11.
Testing on Infected's CM11 now.
guys try carbon rom by Alx31TLse
@nikhil18
You shouldn't use -Ofast Optimisations.
They do more harm rather than bringing any benefits.
Gesendet von meinem C6603 mit Tapatalk 2
---------- Post added at 04:32 PM ---------- Previous post was at 04:30 PM ----------
olex195 said:
Graphic bugs (screen tearing when scrolling) and wifi not turning on on Thomas' CM11.
Testing on Infected's CM11 now.
Click to expand...
Click to collapse
You shouldn't use this kernel on thomas rom, the new drivers aren't added.
Gesendet von meinem C6603 mit Tapatalk 2
nikhil18 said:
thats a very old build try the latest cm
guys any one else having this problem
Click to expand...
Click to collapse
First of all Thank you so much... i cant believe on my eyes when i saw first thread in OG development forum with name "lightning kernel cm11 " ..
your kernel have all the features i wanted , specially Sound control , CPU OC & Undervolting..
m really happy to see that we have working CM11 custom kernel with so many features.
btw Thomas's latest CM11 kernel source > https://github.com/daeiron/android_kernel_sony_apq8064 may be it will help u
Keep developing and Thanks again
delete
Working flawlessly on Carbon ROM :good:
Performance has increased at least 2x.
Just one issue, GPU overclock does not stick, it resets to 400 after a while. (I use trickster mod)
PS: Doesn't work with PAC ROM.
Also works with Beanstalk( Fastboot flashed the boot.img)
venky716 said:
Working flawlessly on Carbon ROM :good:
Performance has increased at least 2x.
Just one issue, GPU overclock does not stick, it resets to 400 after a while. (I use trickster mod)
PS: Doesn't work with PAC ROM.
Click to expand...
Click to collapse
are you using carbon rom by Alx31TLse?
how about battery life?
@nikhil18, i cant express my grattitude for your kernel, i confirmed alls working on latest AICP 4.4.4 KK, has everything i wanted, super fast, response is just simply amazing, i do also however face clocks reverting over time even when i manually clock via system files, but probably os doing it, thank you so much finally a KK kernel that supports everything.. If i can do anything to contribute or help please let me know, will bug report in a couple of days.
Sent from my Xperia Z using XDA Premium 4 mobile app
corpsegrinder62 said:
@nikhil18, i cant express my grattitude for your kernel, i confirmed alls working on latest AICP 4.4.4 KK, has everything i wanted, super fast, response is just simply amazing, i do also however face clocks reverting over time even when i manually clock via system files, but probably os doing it, thank you so much finally a KK kernel that supports everything.. If i can do anything to contribute or help please let me know, will bug report in a couple of days.
Sent from my Xperia Z using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu and turn off stock mpdecision
nikhil18 said:
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu
Click to expand...
Click to collapse
Thanks i will do, the 192mhz on standby is surprisingly very stable, everything is great so far only things not working that i see are d2w and s2w.. You can enable them , i did with trickster mod, but doesnt work.. Only bugs ive spotted..Thanks again xD
Sent from my Xperia Z using XDA Premium 4 mobile app
nikhil18 said:
just copy the sysmon file i have uploaded in the second post to system/etc for proper overclock or you can edit the file yourself but dont burn your cpu and turn off stock mpdecision
Click to expand...
Click to collapse
Hi
m facing graphic and wifi issue in latest CM11.. can u pls solve those issue
Thanks
naitik2012 said:
Hi
m facing graphic and wifi issue in latest CM11.. can u pls solve those issue
Thanks
Click to expand...
Click to collapse
If you installed custom kernel with custom WiFi libs then just reflash ROM and then install this kernel and WiFi will work.
Related
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.
First custom kernel for grand prime.
Features:
Disabled "Samsung features"
Fixed and optimized compression XZ
XZ compression is used for the ramdisk (should increase the speed of processing)
Added function sweep2sleep
Two new CPU frequency (1152MHz and 1209MHz, is not working, the problem is known, in the near future will be fixed)
It uses the new driver Wi-Fi (glitches should disappear with Wi-Fi)
Flash via recovery(TWRP, CWM)
Download: http://rghost.ru/6yTcxsjTw
knox warranty void 0x0
use at your own risk!
Sources: https://github.com/WinKarbik/KK_Kernel_fortunave3g
I have some problems with the stock kernel I be glad if you can solve it on your custom kernel.
1st. why is the idle frequency @ 800mhz? should that be the lowest available frequency which is 200mhz? or is 800mhz the optimal frequency for battery life and performance?
2nd. About processor. Freshly reboot only one core is online the other 3 offline but after some heavy usage 3 cores are online and only one core is offline sometimes all cores will be online. Rebooting is the only fix so that the other 3 cores will go offline. is this problem related to mpdecision or is it a kernel bug? why are the cores staying online? it causes battery drain. Samsung should fix this.
3rd. Can you include other cpu hotplugging please?
4th. Overclock and custom voltage?
thank you and I appreciate your work.
vancer32 said:
I have some problems with the stock kernel I be glad if you can solve it on your custom kernel.
1st. why is the idle frequency @ 800mhz? should that be the lowest available frequency which is 200mhz? or is 800mhz the optimal frequency for battery life and performance?
2nd. About processor. Freshly reboot only one core is online the other 3 offline but after some heavy usage 3 cores are online and only one core is offline sometimes all cores will be online. Rebooting is the only fix so that the other 3 cores will go offline. is this problem related to mpdecision or is it a kernel bug? why are the cores staying online? it causes battery drain. Samsung should fix this.
3rd. Can you include other cpu hotplugging please?
4th. Overclock and custom voltage?
thank you and I appreciate your work.
Click to expand...
Click to collapse
Thank you for your feedback.
1. I dnt know
2. I'll try fix it.
3. I'll try.
4. Maybe in the future
WinKarbik said:
Thank you for your feedback.
1. I dnt know
2. I'll try fix it.
3. I'll try.
4. Maybe in the future
Click to expand...
Click to collapse
you should check grand prime's kernel. I'm using cpu-z to check frequencies. I'm ok with 800mhz idle frequency as long as it doesn't make all cores online all the time which causes battery drain. I think it is a bug on mpdecision. if you can implement other custom hotplug like intelliplug i'd gladly appreciate. I tried different stock firmware but the same problem. Maybe it will be fixed when the lollipop update comes.
WinKarbik said:
Thank you for your feedback.
1. I dnt know
2. I'll try fix it.
3. I'll try.
4. Maybe in the future
Click to expand...
Click to collapse
Hey there , Nice Job comrade.
Some demands :
1. insert Ondemand smartass v2 CPU governors with multi core support ( set minimum freq to 400 not 200) according to my experience
2. init.i support
3. insecure the boot.img
4. leave GPU setting s to stock ,it does work well
5. under-voltage feature
6. vibrate in call answering and hanging up
min freq 400000
max freq 998400 or 1190400
above_highspeed_delay - 20000 400000:60000 998400:150000
boost - 0
boostpulse_duration - 80000
go_highspeed_load - 99
hispeed_freq - 400000
io_is_busy - 0
min_sample_time - 40000
target_loads - 98 400000:85 533333:92 998400:98
timer_rate - 30000
timer_slack - 80000
it s the best interactive governor
please set it
WARNING!!!
Hi there,
Please don't release it yet in the new thread on XDA because this is in the development process there are lots of bug right now, would be better to post it in here to avoid bricked phone on newbie
Also you aren't provide the original kernel source & credit!!
K_TECH said:
Hi there,
Please don't release it yet in the new thread on XDA because this is in the development process there are lots of bug right now, would be better to post it in here to avoid bricked phone on newbie
Also you aren't provide the original kernel source & credit!!
Click to expand...
Click to collapse
Why do I have to put in your thread? I compiled this kernel from scratch, sources and credits will be later.
WinKarbik said:
Why do I have to put in your thread? I compiled this kernel from scratch, sources and credits will be later.
Click to expand...
Click to collapse
Ok then, sorry about that. But please provide the kernel source & credits....
Pls provide source
added sources
plz add more settings.
tnk you for best kernel.
Sent from my SM-N9005 using Tapatalk
WinKarbik said:
Sources: https://github.com/WinKarbik/KK_Kernel_fortunave3g
Click to expand...
Click to collapse
Same as here https://github.com/alexax66/KitKat_kernel_fortunave3g/commits/master
but, never mind. Good jobs, keep it up
K_TECH said:
Same as here https://github.com/alexax66/KitKat_kernel_fortunave3g/commits/master
but, never mind. Good jobs, keep it up
Click to expand...
Click to collapse
Yes, I was based on them, but removed some commits.
working fine in SM-G530M but the kernel disable de NFC
WinKarbik said:
First custom kernel for grand prime.
Features:
Disabled "Samsung features"
Fixed and optimized compression XZ
XZ compression is used for the ramdisk (should increase the speed of processing)
Added function sweep2sleep
Two new CPU frequency (1152MHz and 1209MHz, is not working, the problem is known, in the near future will be fixed)
It uses the new driver Wi-Fi (glitches should disappear with Wi-Fi)
Flash via recovery(TWRP, CWM)
Download: http://rghost.ru/6yTcxsjTw
knox warranty void 0x0
use at your own risk!
Sources: https://github.com/WinKarbik/KK_Kernel_fortunave3g
Click to expand...
Click to collapse
Working great, but you need to add the option to activate and deactivate the sweep2sleep option, because interfere with my lock screen, especially with lock screen gesture(using hi locker)give that option to activate it with a kernel manager like Trickster or any other,everything else seems ok at the moment, using it for 2 day.
Thank you bro..please add
1.init.d support
2.sweep2wake
3.knock knock to lock and unlock
Sent from my SM-G530H using XDA Free mobile app
added init.d support to same kernel
i haven't modified source but unpacked and repacked the image to edit init.rc
Sent from my SM-G530H using XDA Free mobile app[/QUOTE]
Thanks for your affords
Would u mind telling me when U gonna release the second version ?
The new version will be available in the coming days
WinKarbik said:
The new version will be available in the coming days
Click to expand...
Click to collapse
Please try to solve the online CPU cores problem , the kernel force the core 1 and 2 be online after days passing (FYI: rebooting the phone will solve the problem.But we want it to be solved ) and These )
Thanks anyway
BTW : Check this out
Hellow!
This kernel works only on stock and some custom KItKat 4.4.2 TouchWiz ROMs for Samsung Galaxy S4 mini I9190/I9195/I9192 variants!
Features:
Based on last official kernel source for GT-I9195 (used SilviuMik's branch)
Synced with E370KKTU2BOD2 kernel source (KK 4.4.4 kernel for SHV-E370K variant of Galaxy S4 Mini LTE (announced only for Korea))
CPU Overclock (OC): up to 2052MHz
CPU Underclock (UC) down to 81MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Hotplug thread infrastructure
Faux123's Intelliplug
MyFluxi MSM-hotplug new
Alucard-hotplug new
Lazy-hotplug new
Gamma control
Faux123's GPL Sound Control 2.1
Sweep2Sleep
Fast charge
Upgraded taus88 to taus113 algorithm for entropy generator
Added and realy used frandom (fast random number generator)
Krait optimized strcmp and memcmp
Motorola MSM memcopy enhancements (memutils) to improve of the memory subsystem performance
CPU-boost new
Quickwakeup new
KSM (Kernel SamePage Merging)
Timer slack controller
Speedup late resume patch for faster wakeup of the device
F2FS support
NTFS support with full read/write access
init.d support
Updated exFAT module to v1.2.12
LZ4 compressor for zSwap new
TCP-cong: westwood, vegas, reno and etc.new
Set SELinux always into "Permissive mode"
Pre-installed bosybox (placed in /sbin folder)
Compiled with Linaro GCC 4.9.4-2015.06 Toolchain
Additional Governors:
Impulse
[*]Intelliminmax
[*]Intelliactive
[*]Lionheart
[*]Ondemandplus
[*]Smartmax
[*]Preservative
[*]Wheatly
[*]Intellidemand new
[*]Alugard new
[*]Slim new
Additional I/O Schedulers:
FIOPS (Fair Input/Output Per Second)
[*]SIO (Simple I/O)
Credits:
@arco68
@Christopher83
@F4k
@junkyde
@SilviuMik
@GrarakInstallation instructions:
for ODIN:
1. Extract XXXX-ALX-x.x.x.md5 from XXXX-ALX-x.x.x.tar.zip
2. Flash with ODIN XXXX-ALX-x.x.x.md5 file
for CWM:
1. Copy XXXX-ALX-x.x.x.zip (without tar) to your sdcard
2. Reboot into CWM recovery
3. Choose "Install zip from sdcard"
4. Select XXXX-ALX-x.x.x.zip kernel and confirm installation.
Download:
Link1
Link2
XDA:DevDB Information
Custom TouchWiz KK4.4.2 Kernel for I9190/I9195/I9192, Kernel for the Samsung Galaxy S 4 Mini
Contributors
alexax66
Source Code: https://github.com/alexax66/KitKat_kernel_samsung_msm8930-common
Kernel Special Features: CPU and GPU Overclocking, CPU Underclocking, CPU Voltage Control, Advanced CPU hotplugs, Gamma control, Faux123's Sound Control, Sweep2Sleep, Additional Governors and I/O Schedulers, KSM, F2FS, NTFS, Timer Slack Controller, Fast charge
Version Information
Status: Stable
Current Stable Version: ALX-0.1.2
Stable Release Date: 2015-11-15
Current Beta Version: ALX-0.1.3
Beta Release Date: 2015-12-30
Created 2015-08-15
Last Updated 2015-11-18
How to use kernel features
- for CPU, GPU, Hotplug and Gamma Control tunings use Kernel Auditor by Grarak
- for Faux123's Sound Control tuning use FauxSound Audio/Sound Control
- set of some features for switching through a parameters of the build.prop:
For all kernel version:
- to enable Sweep2Sleep:
Code:
ro.config.sweep2sleep=true
- to enable init.d support add in build.prop:
Code:
ro.config.sysinit=true
Only for ALX-0.1.0 and later:
- to enable KSM:
Code:
ro.config.ksm=true
Only for ALX-0.1.1 and later:
-to enable Adaptive LMK:
Code:
ro.config.adaptive_lmk=true
Read about how adjust LowMemoryKiller with management of not killable processesin
Only for ALX-0.1.2 and later:
Use only one of this hotplugs!
-to set Alugard-hotplug as default:
Code:
ro.config.alucardplug=true
-to set MyFluxi MSM-hotplug as default:
Code:
ro.config.msm-hotplug=true
-to set Intelli-hotplug as default:
Code:
ro.config.intelliplug=true
-to set Lazy-hotplug as default:
Code:
ro.config.lazyplug=true
Chaneglog:
ALX-0.1.0
ALX-0.1.1
ALX-0.1.2-Release
ALX-0.1.3
Full Changelog
Kernel tested by me over month, all :good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:10 AM ----------
One thing, gamma control work only in device control app, and after reboot is set by default, maybe in future is will be fixed
can i use with ploiki's rom?
00ehsan00 said:
can i use with ploiki's rom?
Click to expand...
Click to collapse
I not test this kernel in ploiki's rom, but i think that it work without any problems.
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
o0chtm0o said:
OOMMGG!!! Finallyyyyyy!!! I can't believe it!!!
THANK YOUUUU! :victory: :good:
Click to expand...
Click to collapse
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
P.S.
By the way, he not use stock, he use CM, and he did it for us just because he good man :good:
denon480 said:
Yep)))
Some summer day i tired waiting kernel from f4k and ask my friend alexax66, he say ok no problem, next day i tested first version
Click to expand...
Click to collapse
Wow! It's INCREDIBLE!! I have no words. I hope it's not the first and last work, I hope OP can continue with this project. It's amazing! I was waiting for this since loooooong time ago, losing any hopes
o0chtm0o said:
Wow! It's INCREDIBLE!! I hace no words. I hope it's not the first and last work, I tope OP can continúe with this project. It's amazing! I was waiting forma this since loooooong time loosing any hopes
Click to expand...
Click to collapse
not first and not last)))
Soon, OTG and maybe ext4 support
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
00ehsan00 said:
it's stable and there is no battery drain with overclock and underclock.
it's fully work with ploiki's rom too.
do u have plane to add otg and bln support?
and another question is that how can i use sweep2sleep?
thanks again for kernel.:good:
Click to expand...
Click to collapse
We test some new patches bln, dosent work
add in build.prop
ro.config.sweep2sleep=true
reboot
swipe on the bottom screen from left to right, is lock the phone
Tested new kernel with memory patches.
Just for info, work on kernel dont stop
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
petrevirgil said:
Very very good job... I appreciate your work with this kernel ... I have only one question if is possible, what are the best governor and scheduler to use for a balance between performance and battery?
Sent from my GT-I9195 using xda premium
Click to expand...
Click to collapse
I personally like ondemand/cfq I find it makes things that tiny bit more responsive like 1080p video recording and scrolling thru my Google Keep widget. Ondemand for me gives some of the best battery.
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Will this work on I9192?
Loulou-13 said:
who have tested this kernel with the rom "N5 four mini" ?????
better than silviu for battery ???
Click to expand...
Click to collapse
I'm currently using this with N5 four mini rom, works so awesome, incredible battery life, there is just one problem though, private mode does not work with this kernel, but they said its because of the rom not fully compatible with the kernel., i don't know if this works fine with s6 port 5.1, havent tried yet.
Can I use with S6 Mini Port Rom
alexax66
sajid0786 said:
Can I use with S6 Mini Port Rom
alexax66
Click to expand...
Click to collapse
Yes, you can use this variant
Features
Based on official CM-13.0 & CM-14.x kernel source
CPU Overclock (OC) upto to 2GHZ
CPU Underclock (UC) down to 162MHz
GPU Overclock up to 627MHz
CPU Voltage Control (VC)
Faux123's GPL Sound Control 3.5
Faux123's Simple GPU governor
Fast charge
F2FS
Gamma Control
TCP-cong: westwood, vegas, reno and etc.new
zRAM
LZ4 compressor/decomressor for zRAM
init.d support
MSM Limiter
-O3 Optimizations, and Neon Optimizations
Dynamic management of dirty page writebacks
Dynamic FSync
Dynamic LowMemoryKiller
Enable/Disable CRC
Enable/Disable Gentle Fair Sleepers
Additional CPU hotplugs:
MyFluxi MSM-hotplug
Alucard-hotplug
Intelli-Hotplug
Additional Governors:
Yankactive
Intelliminmax
Smartmax EPS
impulse
Alucard
Darkness
Nigtmare
Ondemandplus
Intelliactive
Lionheart
zzmoove
Additional I/O Schedulers:
SIO (Simple I/O)
SIO Plus (Simple I/O Plus)
V(R)
ZEN
DOWNLOAD:
Remix-2 for CM-13
AFH Kernel Folder
For CM-14
https://www.androidfilehost.com/?w=files&flid=125544
Available versions up to and including 2.14
- Unlimited = overclocked to 2052 MHz - If you get a boot loop after flashing this version, it means your hardware can not handle this frequency. Use the limited version
- Limited = max CPU freq. is the stock 1728 MHz. Use the Performance Control app if you want to overclock
As of Remix 2.15 there is only one version for 3G & DS and one for LTE
- The initial CPU frequency is set to stock, then can easily be overclocked with any kernel tweaking app
New version numbers
- After 2.18 the next new version is 2.7.13 as a result of a change in our version numbering system.
- New format: 2.A.B, where A will increase with every change to our custom features, B will increase when syncing with CM sources
Installation instructions
- FLASH USING TWRP 3.0 RECOVERY
- Copy xx.zip to your SDCARD
- Reboot into recovery
- Choose "Install zip from sdcard"
Guide on kernel configuration:
Most up to date guide on CPU governors, I/O schedulers and more!
Source: Github
credits:
@csendre
@osm0sis
@alexax66
@arco68
@F4k
@Grarak
@BlackAfghan
@kotzir
XDA:DevDB Information
CUSTOM KERNEL FOR CM13 & CM14 BASED ROMS, Kernel for the Samsung Galaxy S4 Mini
Contributors
DarkFrenzy, csendre
Kernel Special Features: CPU Overclock (OC) upto to 2GHZ CPU Underclock (UC) down to 162MHz GPU Overclock up to 627MHz CPU Voltage Control (VC) Faux123's GPL Sound Control 3.5 Faux123's Simple GPU governor Fast charge F2FS CPU governors
Version Information
Status: Stable
Created 2016-07-29
Last Updated 2017-05-21
Kernels for testing
attached below
Thanks bro!!!!
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
DarkFrenzy said:
Hi!
Welcome to unofficial version of f4ktion kernel, this is a kernel based on the arco68's/cm13.
Additional Governors:
SmartASSH3 -------> NOT WORKING PROPERLY. STUCKS ON MAX FREQ ALL THE TIME.
DOWNLOADS:
GT-I9192
BLISSPOP6.1 KERNEL --------> It's not BlissPop my friend, it's just Bliss. BlissPop was lollipop 5.1.1
Click to expand...
Click to collapse
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
o0chtm0o said:
Here I send you again the boot.img from my i9195 Bliss 6.1 (MM 6.0.1) Link
Please, correct the colored text :good:
Click to expand...
Click to collapse
hehe silly mistakes! thanks for that. your bliss is ready
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
arsm74 said:
Tks for your work. What abt stock cm13 kernel for i9192 just like i9195? I see only bliss kernel for i9192...let me know what you need to include that?
Click to expand...
Click to collapse
give me the boot.img
flipeicl said:
http://forum.xda-developers.com/showpost.php?p=65273428&postcount=2323
It is for RR 5.6.3 from Blackjubel.
Click to expand...
Click to collapse
for GT-I9190 ???
DarkFrenzy said:
hehe silly mistakes! thanks for that. your bliss is ready
Click to expand...
Click to collapse
Thank you very much. I apreciate your help, support, patience and dedication :good: :good: :good:
DarkFrenzy said:
for GT-I9190 ???
Click to expand...
Click to collapse
Sorry, it's for i9192.
flipeicl said:
Sorry, it's for i9192.
Click to expand...
Click to collapse
too late i uploaded it with GT-I9190 kernel. now removing.
cm13 stock (k2wl) boot image for i9192
rayzen6 said:
Give him boot.img from ur ROM zip,,he'll make one.
He is so kindful person.
And humble request from ME to All HIT THANKS BUTTON ON OP TO ENCOURAGE HIM.
And BTW bliss version for duos working like a charm on latest blissM build, thanks.
Click to expand...
Click to collapse
here is the boot.img as requested for cm13 stock build for i9192
arsm74 said:
here is the boot.img as requested for cm13 stock build for i9192
Click to expand...
Click to collapse
updated. check OP
(now going to sleep )
DarkFrenzy said:
updated. check OP
(now going to sleep )
Click to expand...
Click to collapse
Tks @DarkFrenzy...appreciate it
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Those that you've uploaded are from 20160208 (at least the ones I sent you).
Thanks for your help and support!
o0chtm0o said:
Here I leave you the boot.img files from Bliss 6.1 latest release (20160217)
Thanks for your help and support!
EDIT:
3g is taking a lot for downloading, I'll put it here as soon as it finish
Click to expand...
Click to collapse
i have already uploaded the bliss6.1 is that not latest ?
FM radio not working
DarkFrenzy said:
...
GT-I9192
....
CM13 KERNEL
....
Click to expand...
Click to collapse
A small but important bug report: When using your kernel (for CM13) FM radio doesn't start!
I'm using the latest version of CM13 (2016-02-15) plus Xposed and SuperSU-2.54-BETA.
After reflashing the CM13 package and the additions FM radio is ok again.
Keep up the excellent works! Can I help debugging somehow? Big thanks!
@DarkFrenzy Fast Charge works for me using Performance Control App. GTI-9195
Thanks again for your contribution
AR_Beast™ Kernel
Hey there! Ayush Here
INTRO
After a lot of hard work, I am debuting at the kernel section for a new custom kernel based on latest sources by LOS. As the name suggest, these kernel is made as a All-Rounder,i.e it can provide better battery + performance . Without talking much lets go the features of these kernel.
MAIN FEATURES
CPU
Proper and Uniform Frequency Table Format.
Overclocked CPU to 1.7GHz for big cluster and1.2GHzfor little cluster (for Beast Performance).{Modified and Enhanced by me)
Support for more Governers
Darkness
Impulse
BarryAllen
ElementalX
Intel
Smartmax_eps
Lionfish
Optimized Interactive and ElementalX Governer.
System wide PowerEfficent Workqueue(for Beast Battery Backup).
[*]CPU-Boost,Hotplug Boost and Wakeup Boost
[*]Reduced CPU Load(for Beast Battery Backup).
[*]Fixed High Load average(for Beast Battery Backup).
Fast idling of CPU (for Beast Battery Backup).
Less CPU-Load=Cool Device=More Battery-Life
Various Optimizations.
Hotplugs
Added Alucard (Modified for Beast Battery Backup)
Added Thunderplug (Modified forBeast Battery Backup)
Disabled MSM_Performance hotplug (was of no use)
Thermal
Support for user controllable thermal driver which reduce CPU frequency On a set trip point ( Ported by me )
Default limit set to 50°
Advanced Core control mode
Quad core mode
Fully configurable in the adiutor
Various Optimizations
GPU
Altered GPU-Frequency Table (for Beast Battery Backup)
UnderClock GPU to 19MHz(for Beast Battery Backup)
Overclock GPU to 650MHz
Support for Adreno Idler
Various Optimizations
Battery
Enabled ARCH_Power (for Beast Battery Backup)
New PowerSuspend algorithm (for Beast Battery Backup)
Support for preventing unnecessary WakeLocks (for Beast Battery Backup)
ThunderCharge Current Control Driver v2.1.
Fast Charge Drivers
Incresed Charge current (1370)
Various Optimizations
Sound
FauxSoundControl v4.0 ( Modified and Enhanced by me)
Support for 2 Gains---Headphones, Speaker.
Provides ability to Increase or Decrease Volume beyond Default Limits.
Support for Controlling Volumes separately for left and right Headphones.
Dts sound support
Negative values works too
Display
Kcal Colour control v2
Uses custom colour profile by default for better screen vibrancy, colour reproduction (Enhanced by me)
Support for Glove Mode
Various Optimizations
MISC
Latest Linux Base 3.10.108
Based on latest sources.
Compiled with Uber 7.2.1 Optimized ToolChain
O3 and Graphite Optimizations
Support for FRandom RNG Driver (upto 50x faster than the default one).
Support for various Wake-Up Gestures including DT2W.
State Notifer support (faster and better)
Nvidia power optimizations
Varoius tweaks for better network speed
Support for Dynamic Fsync
Various Optimiztaions For Cpu and GPU
F2FS and exFAT Support
Kexec Hardboot
Support for Load Shifter Mechanism.
Various Tweaks for better battery+performance.
Supports Every MM and N roms
Added LCD notifier
Added Quick Wakeup driver
Exclusive Kernel Adiutor for configuring
This are the features which I Remember many features are omitted due to word limit
I have tried my level best to make my kernel as best as possible. From minor tweaks to major improvements, everything is done.
Installation Instructions
Boot into recovery (twrp recommended)
Wipe cache and dalvik cache
Flash AR_Beast™-Kernel Rxx.zip
Reboot to system
Done
XDA:DevDB Information
*AR_Beast* Kernel, Kernel for the YU Yureka
Contributors
Ayush Rathore
Source Code: https://github.com/AyushR1/AR_Beast-Tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 9
Stable Release Date: 2018-01-29
Created 2018-01-29
Last Updated 2018-01-29
DOWNLOAD
R9 - Oreo(8.0/8.1) - https://www.androidfilehost.com/?fid=818070582850488842
Kernel-Adiutor-Mod - https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-v6-t3740249
Telegram Group :- https://t.me/joinchat/AAAAAEEtgBFuVYjNE2yRbA
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
PRO Sir!!
Thanks for Oreo Support Bro.,
Can we use it for nougat also ?
Will R9 version Support Nougat?
Please reply me. If not which ROM is preferrable to install? Suggest me.
Has anyone tested if this kernel works fluently with NitrogenOS 8.1 ROM ? Please do confirm as this kernel looks so tempting.
The kernel Adiutor mod is broken. Can u give another link.
da_gamer_pk said:
has anyone tested if this kernel works fluently with nitrogenos 8.1 rom ? Please do confirm as this kernel looks so tempting.
Click to expand...
Click to collapse
bro i am using this rom with my nitrogen os shekhawat 20180208 , it works super fine on nitrogen, trust me u can go with this kernel, everything is working fast and smooth
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
thanks .. need the link for auditor mod ?
Ayush Rathore said:
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
Click to expand...
Click to collapse
hi bro, thanks .. need the kernel auditor link, i guess its not in the build , or please tell how to use it
Kernel auditor link not working.
Please provide a new one.
praveen139 said:
Can we use it for nougat also ?
Click to expand...
Click to collapse
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
jaydeep darandale said:
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
Click to expand...
Click to collapse
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Hariprasad01 said:
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Click to expand...
Click to collapse
Ive tried my level best to replace and even re compress the "wlan.ko" but nothing is working for me...
cannot open the wifi and hotspot shows error.. what can i do.. please help.. even tried re-flashing everything..
Wifi and hotspot not working.!!
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Could anybody please answer my question!!!
Shreyas Parashar said:
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Click to expand...
Click to collapse
I seriously am waiting for my reply,, please help me with the wifi fix!!!
Kernel is discontinued.
A second more
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
Can u just help me withthe way to wifi fix.?
help me with building of this kernel with my battery 4000maH
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
i am trying to build kernel from your source, (in ubuntu c9.io cloud )
but i get failed with errors, using tomato-nougat brach and GCC-prebuilt-8 toolchain
i think your build.sh contains many different command for ubuntu to understand ! isn't ?
help