Database Develop

Restoring STOCK (or other) BACKUP after CM

Hi,
I hope that my experience could help other persons that fall in my situation.
After a try of CM, I couldn't restore my stock backup anymore, the phone hanged up in the lg boot screen.
There were no problems about ext4 partition or wiping or fixing permission.
I was thinking to do a NVflash procedure, but i gave another try: using old modaco CWM recovery. I overwrited CWM 4.2.0.2, performed a wipe, installed the modaco zip ext4->ext3 (i didn't remember if i was ext 3 or 4) and then restore my STOCK backup: EVERYTHING WAS FINE!!!
Maybe there's a problem in the newest CWM during restore a backup, i don't know, but in this way i could restore my original firmware.
Hope that this could be usefull.

Did you do your stock backup with modaco CWM? It has different MD5 checksum than the CWM. Might be the case why you can't restore your backup.

No, I did the stock backup with the original CWM.
I think that the problem is in the restore procedure of the original CWM (4.2.0.2), in fact also the CM restore is impossible, only if you install the zip immediately after the restore. Instead... hangs up.

I find when that happens the best method is to reflash the rom your restoring and just restore the data from your nandroid backup. Always works for me.

confirm this issue with cm & nandroid restore
-----------

This is true, restore and then install the rom. But how if your restore is the stock rom? NVflash? It's not the same.
Fortunally, Modaco CWM solve it without this procedure.

Thanks!!
This solve my problem with my stock nandroid restore. I downgrade CWM to 3.1.4 (did the backup with 3.2.8 version) and now works perfect!!
Finally i could restore my stock rom.

my solution was...
1. nandroid backup of mcr
2. full wipe & installed cm7
3. nandroid restore of mcr
4. installed mcr without wipe (this solved bootloop after restoring)

[Q] KERNEL Backup/Restore.

Hello,
I need to know before install Overcome & CWM if it's possible to backup my stock KERNEL. Currently i have 2.6.36.3 kernel.
I think that is better to restore with the original kernel if need to use tha warranty one day ?
So is it possible to backup or download the stock KERNEL.
Thanks a lot for your help.

before you do anything get a nandroid backup and save that original nandroid backup.
Nandroid Backups are a full ROM backup, that means:
Radios
ROMs
Kernels
User Data
Trying to claim a warranty after you violate the terms and services isn't the most honest thing to but if you intent to cheat the warranty system that just hold on to your backup. A nandroid backs up everything

Hi,
Thanks a lot for your reply. For the warranty I am okay with you regarding the honesty.
About the Nandroid ROM backup, i read somewhere that full backup must be done but it backup all except the Kernel !
I am little bit lost :
1/ The KERNEL Backup can be done with Nandroid backup ?
2/ Can we make Nandroid backup with stock ROM & stock Kernel (fresh TAB) ?
3/ The CWM is it a Kernel ?
Thanks a lot.

subtil123 said:
Hi,
Thanks a lot for your reply. For the warranty I am okay with you regarding the honesty.
About the Nandroid ROM backup, i read somewhere that full backup must be done but it backup all except the Kernel !
I am little bit lost :
1/ The KERNEL Backup can be done with Nandroid backup ?
2/ Can we make Nandroid backup with stock ROM & stock Kernel (fresh TAB) ?
3/ The CWM is it a Kernel ?
Thanks a lot.
Click to expand...
Click to collapse
CWM stands for clockwordmod, its a custom recovery. You need a custom recovery before you can start changing things about your tablet. It is Not a kernel. Think of a car. A kernel is like eh engine, the recovery is like a toolbox. Its more complicated but thats the idea. The stock recovery is too limited, which is why we have custom ones
When you do a nandroid back up it backs up everything. When you do a nandroid back it backs up the kernel as well as the ROM all of your settings and app data. All in one.
If you want a stock nandroid Do it first thing after you have a custom recovery. A nandroid is saved in the clockwordmod folder. Then save that file somewhere safe. Flash drive computer t whatever.
Hope this helps

subtil123 said:
Hello,
I need to know before install Overcome & CWM if it's possible to backup my stock KERNEL. Currently i have 2.6.36.3 kernel.
I think that is better to restore with the original kernel if need to use tha warranty one day ?
So is it possible to backup or download the stock KERNEL.
Thanks a lot for your help.
Click to expand...
Click to collapse
Here is the Flashable zip for backup your Old recovery and kernel
First, You need root
From your stock recovery, Flash backupkernelrecovery.zip.
Approximately 30 seconds, backup process will make a folder "mybackups" in your SD card,
Reboot as normal, and Open "My Files" and see folder "mybackups"..
You'll find 2 file recovery.img(your stock recovery) and boot.img (stock kernel)
For Restore your recovery.img
download overcome cwm from alterbridge86 thread, unzip the file and replace recovery.img from that files with yours..zip again and flash from recovery, reboot and you got your old stock recovery..
Warning: Only restore Stock recovery after nandroid Restore done..with same firmware
Tested on my P7300 and works..

Hello All
Thanks a lot for your help.
I'm now on overcome 2.2.0 with Motley Kernel.
I just done a Nandroid Backup before. I also found on Net a file to restore all, Stock rom & Kernel.
Thanks again.

Nandroid restore ICS to GB

So i did a nandroid backup before installing an ics custom rom. Now i wanna go back to simplicity rom. Last time i tried it said that it could mount the sd and all. Is there something i need to do before?

Flash stock GB before restoring a GB nandroid

beardedwonder said:
Flash stock GB before restoring a GB nandroid
Click to expand...
Click to collapse
So restore to GB, I already have JVP. Install CF-Root, Download Rom Manager, Flash Recovery and then nandroid restore?
thanks

mattwilkinson11 said:
So restore to GB, I already have JVP. Install CF-Root, Download Rom Manager, Flash Recovery and then nandroid restore?
thanks
Click to expand...
Click to collapse
I would just flash a kernel with recovery through odin and do a nandroid restore from there, if you're already in JVP.

beardedwonder said:
If would just flash a kernel with recovery through odin and do a nandroid restore from there.
Click to expand...
Click to collapse
Yup this is the right way to do it. Get GB ROM with CWN recovery first though ODIN and then restore nandroid backup through it.

Back to stock

Hello I have an xperia z c6602 I'm currently using pac man rom with meow kernel
My bootloader is unlocked and I want to go back to stock
I have a CWM backup of my stock rom. And a backup of my TA partition (i read it was useful)
How do I go back to stock? Can I just restore my CWM backup? Or I have to flash through Emma? How do I restore my ta backup?
Can someone be so kind to guide in a newbie way please? (I'm use to play around with Samsung devices. This is really different!)

plotinus said:
Hello I have an xperia z c6602 I'm currently using pac man rom with meow kernel
My bootloader is unlocked and I want to go back to stock
I have a CWM backup of my stock rom. And a backup of my TA partition (i read it was useful)
How do I go back to stock? Can I just restore my CWM backup? Or I have to flash through Emma? How do I restore my ta backup?
Can someone be so kind to guide in a newbie way please? (I'm use to play around with Samsung devices. This is really different!)
Click to expand...
Click to collapse
Hello, I was on pac rom few days ago as well, then i decided to try miui which is based on stock.
So here's the steps:
BACK UP ALL YOUR INTERNAL SD FILES AND FOLDERS because flashing ftf will erase everything inside internal sd, I never did a backup, lost all the chats and messages. :crying: :crying: :crying: :crying: :crying:
copy all the flashable .zip u want to your sd card.
Flash a stock .ftf file .67 / .74 will do, then root it with any method u want
then flash original kernel using flashtool
then reboot str8 to recovery and proceed to do a clean wipe then flash any stock custom rom you want.
let me know if you have any doubts or question here.

My method is
1.Backup everything, photos, messages, app data using titanium backup, literally everything you need.
2.Store backups somewhere safe, especially titanium backup file(the whole thing).
3.Flash back stock rom and wiping everything.
4.Relock bootloader.
5.Now you have a clean phone, root it again and restore titanium backup app datas,
But be sure to only restore games, apps, but not system files, it may causes crash.
6.Restore the rest of them.

xIceCream said:
Hello, I was on pac rom few days ago as well, then i decided to try miui which is based on stock.
So here's the steps:
BACK UP ALL YOUR INTERNAL SD FILES AND FOLDERS because flashing ftf will erase everything inside internal sd, I never did a backup, lost all the chats and messages. :crying: :crying: :crying: :crying: :crying:
copy all the flashable .zip u want to your sd card.
Flash a stock .ftf file .67 / .74 will do, then root it with any method u want
then flash original kernel using flashtool
then reboot str8 to recovery and proceed to do a clean wipe then flash any stock custom rom you want.
let me know if you have any doubts or question here.
Click to expand...
Click to collapse
Thanks for the replies! Do you know how to restore my ta backup? Or by flashing the stock rom it would be the same? If not. At what part of the process should I do it?

plotinus said:
Thanks for the replies! Do you know how to restore my ta backup? Or by flashing the stock rom it would be the same? If not. At what part of the process should I do it?
Click to expand...
Click to collapse
restore ta backup is the last step basically, ( after flashing stock kernel and stock rom)
i think you used the backup ta for windows from one thread if i'm not wrong,
just restore dry run just to make sure the ta is correct and then just restore it
(the phone should be power on like normal, with usb debugging on)
for your concern, cwm backup also can be used, just restore it and it's done, but, the app data and all other things will return to the state during the time you made the backup, so the progress you did in this custom rom wil not be saved, unless you used titanium backup after you restore nandroid.

Excellent! Thanks man I will restore my backup and restore TA. And yes. I used a Windows tool to make the ta backup (don't even know what's that for. I just read it was important) haha
Sent from my C6603 using XDA Premium 4 mobile app

back to stock rom

I want to revert to stock rom (4.1.2) from cm10.1.3. I have a backup of stock rom but don't know the procedure of reverting. Does it requires flashing kernal also and if any risk is involved? plz suggest
Sent from my GT-N7000 using XDA Free mobile app

[email protected] said:
plz suggest
Click to expand...
Click to collapse
Start to read the sticky tutorials how to install a stock rom, how to restore backups etc.
The only risk involved: errors as a result of laziness.
In short: backup your CM, restore the old from recovery. If that doesn't work install the kernel/recovery you used when generating the backup, reboot into recovery and try to restore again.

Just to add to what ThaiDai said, I dont remember if the 10.1 CM recovery uses preload and if it was removed in 10.2.. But when you boot into recovery and if you cant format the preload partition in mounts and storage, then flash any Philz kernel, reboot into recovery, enable preload in settings and restore the backup.