The earpiece of my phone was very quiet so I decided to replace it.
I ordered Nokia Lumia 610 earpiece (I was told that it'll work in Droid 4).
When I was putting the phone back together, the connector of the flex cable got twisted a bit so the display wasn't working anymore.
I tried to fix the pins and put it back together. After that the display seems to work just OK, keyboard as well.
But the real problem right now is that when I'm trying to make a phone call, the whole phone freezes and I cannot do anything (the phone keypad is shown but it doesn't react to touch at all). When I blank the screen from the power button, I got the chance to hang up the call.
Anybody who would know what would've happened when I put the phone back together???
Thanks a million in advance!
Related
Hi i have had an x1 since august but within a month its been dropped and then it was unable to show the screen, i opened my device to try and fix my problem but messed with nothing whatsoever, when i put everything back together it wouldnt even turn on anymore! all it did was charge and when it was fully charged there was a red light. can anyone help me? please im desperate to fix my phone. My first paycheck was spent on this and i loved it despite the numerous flaws! also i havent charged it in over 2 - 3 months. Also when i opened it the tape that connect the rear and the front is kind of messed up, would that effect anything?
The tape that connects the front and the rear is the cable for the screen, so if it's messed up, you might need to get a replacement.
here is a pic, the red part where its circled is where i think the problem is, it looks ripped off, i did have a hard time opening and putting it back together the first time also.
Sounds like (Or rather, looks like) you're screwed, as far as I can tell, if it's really ripped. Otherwise attempt to clean the contact points with some cleaning alcohol and Q-Tips - something might have made it's way in when you disassembled the unit and blocked the electrical signals.
ill try it, but if that doesnt work, would i be able to replace the flex ribbon? would acteone work?
got this checked out by my friend, he told me its the flex ribbon cable, thanks for the help btw. Does anyone know the cheapest place to get a flex ribbon cable from?
Still would like confirmation if its my flex ribbon cable before i spend 40 bucks on a new one. thanks!
Hi, I am new to this forum. Sorry for posting here but I think I have similar or same problem with my xperia. Few days ago I drooped my xperia and then I could not turn it ON. I opened unit, the flex cable was detached.
After attaching the flex cable. I could turn the unit and it booted normal but no response on touching screen I even tried to align it but it did not respond. I turned off the unit. After trying turning it back ON only back light of the screen turned on (no sony logo, no xperia logo no winmo).
I tried to turn it on few times but same result. Even tried to soft reset and hard reset it but no difference only back light. Is it because of flex cable or because some thing else? I can`t even go in to 3 color screen. Please help. Sorry for my bad eng. Thanks.
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
rocklobster666 said:
last night my x1s screen was going all fuzzy like different colours and cut out a few times. now today notthing. the screen is blank. backlight comes on i think. the phone starts up normal as i can hear the start up sound and i can accept calls. i think this is failure of the felx cable. Is this true? and if so is i worth get on and fiting it myself or going to a repair shop. im on the cheap here so any fix will do.
Click to expand...
Click to collapse
I have had the second part of your problem before where screen doesn't come on but the back light and everything else works. A couple of months back when I was at college I dropped my phone really hard at a party( I was wasted ) and the next morning the screen wouldn't come on. So what I did was I looked up the guide to how take the X1i apart and luckily one of my buddies had the same screwdrivers that I needed because he uses it on his the Blackberry Storm 2. So what I did was went to where the Flex ribbon cable was located unattached it, then reattached it, and put my phone back together and the screen came back on and still works to this day. If this helps press thanks.
http://forum.xda-developers.com/showthread.php?t=535664
i'm having a Problem too.
the to lines in the top of my screen are blue ^^
i think its a problem with the connection, but as it isn't really big and i don't have a newer phone i will dissasemble it later ;-)
please replace the * with t,or copy it without h**p:// (can't post outside links yet ^^)
h**p://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296861_222070397844215_100001237692896_682738_4498500_n.jpg
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
ZombieWarez said:
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
Click to expand...
Click to collapse
The sensor that the phone uses in order to register face proximity is just to the left of the forward facing camera. Ensure this is connected nice and solid (reseat the wire if necessary) and make sure there is no dust in it as this will likely cause it to behave as it has. Simply replacing the screen won't do this, but improper cleaning before replacing the screen could. You may have to tear the phone down again just to reseat the screen itself.
ZombieWarez said:
About a couple weeks ago I cracked the digitizer(touch screen) on my Lg Thrill and replaced it. Before doing this everything was fine with the phone...I upgraded to GB and it is also rooted but like I said everything was working just fine until I replaced the digitizer. Now every time I make or receive a phone call the phone goes black like it was close to my ear. This only happen if I answer the call and if I make a call it happens right away.The phone is still on and the calls go through but the phone goes black and is useless and I can't even hang it up until the other person hangs up. Not even pressing the power button on the top helps. I have checked and nothing is blocking the sensor on the front of the phone and the new digitizer I got from ebay but again it is a perfect fit and nothing is blocking the sensors...Any Ideas or suggestions? anything would be a great help thank you!
Click to expand...
Click to collapse
hmm i had the same issue BUT mine would do it when i cracked the digitizer, which is weird.. replacing my digitizer fixed the issue or it just cleared up itself, try resetting the phone.. Or like zombie said, Tear it down and clean the connectors and sensors
Cynagen said:
The sensor that the phone uses in order to register face proximity is just to the left of the forward facing camera. Ensure this is connected nice and solid (reseat the wire if necessary) and make sure there is no dust in it as this will likely cause it to behave as it has. Simply replacing the screen won't do this, but improper cleaning before replacing the screen could. You may have to tear the phone down again just to reseat the screen itself.
Click to expand...
Click to collapse
I have taken the phone completely apart and used a can of compressed air to clean it I double checked the sensor connector and made sure there was no dirt or dust in or around the connections. I put the phone back together and made a test call...still doing the same thing
But I did notice that when I made a second test in a dark room the phone did not go black and when I moved the phone close to a light the phone went black....needless to say I am so confused now more then ever. I did a third test and the same thing happened. So any other ideas as to what may be going on??? Seems like the sensor is working no? just in reverse??? Maybe the tint in the new digitizer is too dark? but this still makes no sense as to why the phone goes black when it gets exposed to light. Anyway any other help would be great right about now THANK YOU!
using HTC Google Nexus One, Android 2.3.4
This is very strange, but I noticed today that my camera is no longer working. I have no idea why, but it just goes black when I select camera. I have restarted my phone, took out the battery, etc. and nothing. Also, I even tried downloading other camera apps, and they won't work either.
Even more frustrating, though, is that my phone goes black when I make or receive a call. The calls do not get dropped, but when the call is over, I can't even hang up, as my screen is black. It's weird because my phone is still "ON," but I obviously can't do anything. The only thing I can do is take out the battery, put it back in, and turn the phone back on. Then, it works perfectly normal...until I make or receive another call. I have no idea what to do.
Can anyone help? I'd really appreciate it, as I use my phone for everything!
Hi,
I had very similar issues after accidentally dropping the phone (landed exactly on its face) . The sensors no longer worked, nor the camera and the flash light.
The problem during the phone calls is most probably related to the defect of the proximity sensor. However, I managed to use the phone with a bluetooth headset. The screen could be turned on any time, and, of course, I could terminate the call using the headset's hardware button. I used my N1 this way for over a year...
Few weeks ago I dismounted the phone, and realized that upper motherboard's connetor was detached from the main motherboard. After fixing it, everything is fine again.
I followed instructions from here: http://www.ifixit.com/Guide/Installing+Nexus+One+upper+motherboard/8025/1
I hope it helps.
Cheers,
Zoltan
Thank you for this thread
I created an xda account just to post about how this helped me.
My Nexus One camera had stopped working, auto-rotate no longer worked, and my screen was remaining dark after completing phone calls. So annoying. Was about to pony up some money for a new phone.
BUT... I followed the ifixit instructions that Zoltan posted above to take my phone apart, and low and behold, I had a loose connector. Plugged it back in, reassembled my phone without breaking anything, and it works! I have camera and auto-rotate again, and my screen acts normally when making phone calls.
Thank you!
I've got a replacement screen that my friend had in his house. Mine was broken (both the display and the digitizer, the latter was acting very weird). I did the replacement myself, and when I was finally done, I noticed something. The Touch Screen wasn't working (I could see the image but no input was recognized). I tried opening it and checking every single cable to see if there was anything wrong, but there was nothing looking broken or out of place. When I was going to test it, I noticed another very weird thing. It actually works if I keep the back of the phone off (not the back interchangable cover, I mean the back of the phone that is screwed in place). The problem is that this phone has a very annoying design that makes it so the Wi-Fi, Speakers, Camera and some other stuff don't function well with the back plate off, speacially the Wi-Fi.
I trully have no idea what is happening or what is causing the problem with the touch screen, and have no idea why the back plate makes the screen act funny. Can someone please help me figure this out?
Perhaps something in the digitizer's flex cable is shorting with the back panel. Try putting a layer of electrical tape between the flex cable and the back panel.