PIE and Updates - Moto X Q&A

So, admittedly, I'm not very knowledgeable on PIE root method and Towelroot and what tethered root really does. I know that having root and TWRP can break some updates. Since this is a tethered root that goes away after a reboot, is a reboot all that is necessary to return completely to stock or are there other steps that one must take before doing any OTA's?
Verizon Moto X (Locked Bootloader, duh)

Because write protection is still enabled, and PIE and Towel are both "temp" roots, changes made are lost at power off/on.
BUT keep in mind, they wont work after you update your phone. So if you need root... do NOT update.

thank you. That was my assumption but it doesn't hurt to get verification. I decided that I'm passing on any updates until Android L comes our way.

Related

OTA 139.15.1 keep root

All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
First item, this is a question so it should belong in the question and answer threads! Secondly look here http://forum.xda-developers.com/showthread.php?t=2466191
Sent on my Moto X
Sorry, and thanks! I'll probably give this a shot, make that camera work a little better...
You can always install the SafeStrap ROM here. That's what I did.
http://forum.xda-developers.com/showthread.php?t=2484908
[Rom] [VZW] SafeStrap 139.12.57
Sent from my Moto X
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X
mercado79 said:
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X
Click to expand...
Click to collapse
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.
dymmeh said:
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.
Click to expand...
Click to collapse
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X
mercado79 said:
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X
Click to expand...
Click to collapse
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk
juancaperez2000 said:
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's what I thought too. Thanks.
MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191
will2live said:
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191
Click to expand...
Click to collapse
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.
MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
mercado79 said:
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.
Click to expand...
Click to collapse
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!
boardrx182 said:
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!
Click to expand...
Click to collapse
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
dymmeh said:
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you
Click to expand...
Click to collapse
That's awesome, didn't realize that would happen automatically. I completely expected that I'd have to complete the entire root process steps that were outlined in an earlier post if I wanted root. Thanks for the reply.
will2live said:
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.
Click to expand...
Click to collapse
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.
jayboyyyy said:
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.
Click to expand...
Click to collapse
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.
will2live said:
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.
Click to expand...
Click to collapse
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.
jayboyyyy said:
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.
Click to expand...
Click to collapse
Gotchya, makes total sense now what you are saying. I think there is just confusion at times when talking about root & OTA because of different ways to do it in a case like this device. Being a Moto guy for so long tho i'm use to all the BS they throw at us.....lol. That said that is why i posted the link I did. Imho it's a bad plan to update using the other method of installing pwnmymoto and not running it first before taking the OTA. Doing the process to protect root before updating is a much safer bet atm imo. Sure its a little more work but at the end of the day you dont have to be worried as much moving forward. Only concern I have still for doing it the longer way is if that process will work when they push out 4.3. It had alot of changes in it so lord only knows what will be up for keeping root. And really in my case its no concern but for all the folks with consumer version it is still a concern i think for the time being

Questions regarding rooting

I am currently using my unrooted Moto X with US Cellular. I was holding off on rooting until 4.4 hit but it seems that that might not be until next week given the holiday. I wanted to go ahead and root on 4.2.2 but want to make sure I do it correctly.
Do I need to unroot before taking the OTA when it comes or do I lose root when I take the OTA?
Also, I am not very experienced with Xposed Modules. Which ones work for 4.4 and which ones should I avoid after the update (for now)?
You can not take the ota if you have root. Root breaks the recovery and if you try and take the ota you will bootloop infinitely until you /fastboot erase cache
When 4.4 is available you need to follow the slapmymoto instructions (if you want root) or rsdlite back to 4.2.2 ota without root and take the ota.
As far as modules go with 4.4 gravity box works, motoxsposed didn't... Just make sure you get the beta xsposed framework installed and install it in recovery mode... Took me a few tries to get it to stick.
I know devs are working on upgrading their modules to work with 4.4, so if you have favorites, keep tabs on their updates.
AT&T Moto X rocking rooted 4.4
theraffman said:
You can not take the ota if you have root. Root breaks the recovery and if you try and take the ota you will bootloop infinitely until you /fastboot erase cache
When 4.4 is available you need to follow the slapmymoto instructions (if you want root) or rsdlite back to 4.2.2 ota without root and take the ota.
As far as modules go with 4.4 gravity box works, motoxsposed didn't... Just make sure you get the beta xsposed framework installed and install it in recovery mode... Took me a few tries to get it to stick.
I know devs are working on upgrading their modules to work with 4.4, so if you have favorites, keep tabs on their updates.
AT&T Moto X rocking rooted 4.4
Click to expand...
Click to collapse
So I can go ahead and root now on 4.2.2, RSDLite back to stock when 4.4 OTA arrives, and take the OTA then root 4.4? I just want to make sure I get this right. Sorry for the noobness. I came from a S3 and it was light-years easier (one click root etc) and never had to do all the technical stuff. I'm sure this locked bootloader situation causes some headaches for devs.
I hope by the time US Cellular gets 4.4 OTA most of the 4.4 Xposed stuff will be working. At least Gravity Box works as well as Greenify... those are the two main ones I wanted to have access to.
Thanks again for the hand holding...

[Q] ATT Moto X, rooting and Long Term Effects

My Moto X is still on 4.4.2, and I've removed Write protection with MotoWpNoMo. Back then I had read somewhere that you would no longer be able to upgrade because of the application of MotoWpNoMo. I haven't been able to find where I read that so is that still true? Can I upgrade to 4.4.4 or even L when it is released?
Also I have notice that my battery no longer will last the full day that was boosted when the Moto was first Launched. I run apps like tasker and xposed framework. I have been trying to track down what could because my battery to lasting only half the time. What apps could I use to get a better picture of my battery situation?
I've also considered ditching the stock from and touchless controls since it seems like I use it less and less each day. I know there is a way to load Rom with safestrap bur I know nothing about it. Could someone link me to some good info about how it works and how to prevent messing up this wonderful phone?
The MotoWpNoMo and SlapMyMoto vulnerabilities were patched in 4.4.2, so if you updated to 4.4.2 on a locked bootloader you lost what MotoWpNoMo gave you and write protection is enabled on your phone. But you might have kept root.
The OTA's do a pre-flash verification check. Things like Xposed, patches, hacks, modifications, etc. can/will get in the way of that, preventing the update from installing.
Also, the OTAs on the X are incremental. So if you want 4.4.4, you'll have to be on 4.4.2. If you want L, you'll have to be on 4.4.4.
If you really want future updates, you have to weigh how important Rooting, even partial or temp root is. (Temp root means you have root until you power off/on your phone. It still doesn't disable write protection so you can't create files in /system and other folders, and any changes made would be lost at power off/on)
Since you can not unlock your bootloader (unless the China Middleman can come through for you, see the thread in the general section), you can't even temp root 4.4.4, and likely wont be able to L.
If rooting in the future doesn't bother you, the quickest way to get back on the OTA path, undoing any changes you might have made, is to use RSDLite and re-flash the firmware which is currently on your phone (NEVER ATTEMPT TO DOWNGRADE or use an older ROM version!! or you risk bricking your phone!)
As for battery... it could be an app, like some of the recent google or moto app updates that have come down recently. It could also be the battery in your phone degrading. There is a thread on battery life with many good tips. And you could try running your phone until it shuts off, then charging via wall charger until 30 min after it says 100% a couple of times in a row to reset the battery's "electronic battery gauge".
As for safestrap, I don't use it since I have a Dev Edition and unlocked my bootloader. There are some threads and discussions over on Rootzwiki.com BUT you will need to be rooted with write protection disabled to use SafeStrap... Since you are now on 4.4.2, you can't disable write protection, so safestrap is out.

Root before or after Pie

I found this guide to rooting[NOTE: see below]. And then I just heard the news that the Moto G6 is confirmed to get a Pie upgrade. A couple of questions:
If I want to root, should I do it ahead of the Pie upgrade? Will my rooting be preserved? Will rooting cause trouble with the upgrade?
Will the upgrade likely break the rooting method?
Thanks!
NOTE: Apparently this forum censors Droid Views links. I inserted a space in the URL so the whole thing doesn't gets *'ed. The page title is "How to Unlock Bootloader, Install TWRP and Root Moto G6" in case you just want to Google it.
Updating will not keep root and will probably break things if you have root while updating. In fact, you'll definitely not be able to install an update if you've got TWRP installed in place of stock recovery.
If you've got the patience to wait for Pie to come through, I'd say wait for it.
After the update to Pie, will the same rooting process work? Or will there be a new process?
Is the update to Pie something I have to approve or initiate? Or could I wake up in the morning and find out my phone already updated?
Thanks so much for the help!
komi_9 said:
After the update to Pie, will the same rooting process work? Or will there be a new process?
Is the update to Pie something I have to approve or initiate? Or could I wake up in the morning and find out my phone already updated?
Thanks so much for the help!
Click to expand...
Click to collapse
The same rooting process should work in theory, granted root solutions such as Magisk have been updated to support Pie.
You usually have to recieve the notification and then initiate an update on any Android phone, but I can't tell you about this one in particular because I haven't received any sort of update since I got it.
Sounds good. I am planning to update to Pie (whenever that comes), and then I'll worry about rooting. But I was worried that down the road when we get to Q that it would auto-update and break my phone because it was incompatible with TWRP or something. But so long as I have the chance to decline it, I will hopefully be good.
Root now with magisk. When p comes you can flash the magisk Uninstaller and unroot. Then after you update to p you can boot a twrp.img again and flash magisk again.
Sent from my moto g(6) plus using Tapatalk

Question Will root persist after an OTA update?

I've wondered this ever since my Tab S8+ reported it's device status as official despite me having flashed the tablet with magisk-patched firmware and asked me to update. This same exact scenario has happened with my rooted Tab S7+. However, I rooted that by flashing Magisk in TWRP rather than flashing patched firmware with Odin. I don't think anyone has tried applying an OTA update on their rooted Tab S8 device since the latest firmware isn't available yet, and could result in needed to flash patched firmware again. Then again, most rooted device will have their devices report as custom instead of official, so that may be why.
I'm willing to try this out on my Tab S7+ first as that device has TWRP, and I can easily restore my device to a rooted state afterwards. Since both tablets are relatively similar, I'll assume that if root persists after updating in the Tab S7+ then it should be safe to do so on the S8+ I'm curious of doing this solely for stability and performance updates in combination with everything root access grants.
With any part of the firmware patched, OTAs won't work - they'll fail. You could also wind up with a brick - most likely one you can recover from but I wouldn't bet either way on that. As always, have everything backed up in case the worst happens.
Since I still won't get my Tab S8 Ultra for another 10 days (unless they delay again), I haven't paid too close attention to the rooting instructions specific to this, and have only made note of them, however, the basic rule still applies - if any part of the firmware has been modified from stock, then OTAs will recognize that it's been modified and fail to apply - or as I said, it could possibly try to apply what it can but you could wind up with a mix and match of different firmware versions due to the OTA failing eventually, which would need some manual work to recover from - or very worst, you might need to start over from scratch and lose everything.
When I'm on any rooted device, I go into Developer options and disable Automatic system updates. It's still possible you could get an update prompt if you manually check for an update, but it's not advised to use OTAs when rooted.
I've always been a practitioner on all devices of flashing the full new firmware updates and re-rooting, however, I know that at least with devices with dual system partitions like Google Pixels (as far as I'm aware, Samsung still hasn't adopted dual partitions yet), there have been ways to apply Magisk to a manually sideloaded OTA, although I've observed other users who do this and something inevitably goes wrong with the process from time to time.
Not that full firmware flashes are immune to things going wrong.
Edit: If you try an OTA on yours, by all means, let us know what happens.
Edit 2: Adding TWRP to the mix may, or may not, affect the viability of applying OTAs. I've hardly used TWRP on any device in the last five years, so I'm not sure if it's smart about some things and can take root into account, but since TWRP doesn't exist on the Tab S8 (I don't have any older Tab), it won't matter for me.
roirraW edor ehT said:
With any part of the firmware patched, OTAs won't work - they'll fail. You could also wind up with a brick - most likely one you can recover from but I wouldn't bet either way on that. As always, have everything backed up in case the worst happens.
Since I still won't get my Tab S8 Ultra for another 10 days (unless they delay again), I haven't paid too close attention to the rooting instructions specific to this, and have only made note of them, however, the basic rule still applies - if any part of the firmware has been modified from stock, then OTAs will recognize that it's been modified and fail to apply - or as I said, it could possibly try to apply what it can but you could wind up with a mix and match of different firmware versions due to the OTA failing eventually, which would need some manual work to recover from - or very worst, you might need to start over from scratch and lose everything.
When I'm on any rooted device, I go into Developer options and disable Automatic system updates. It's still possible you could get an update prompt if you manually check for an update, but it's not advised to use OTAs when rooted.
I've always been a practitioner on all devices of flashing the full new firmware updates and re-rooting, however, I know that at least with devices with dual system partitions like Google Pixels (as far as I'm aware, Samsung still hasn't adopted dual partitions yet), there have been ways to apply Magisk to a manually sideloaded OTA, although I've observed other users who do this and something inevitably goes wrong with the process from time to time.
Not that full firmware flashes are immune to things going wrong.
Edit: If you try an OTA on yours, by all means, let us know what happens.
Edit 2: Adding TWRP to the mix may, or may not, affect the viability of applying OTAs. I've hardly used TWRP on any device in the last five years, so I'm not sure if it's smart about some things and can take root into account, but since TWRP doesn't exist on the Tab S8 (I don't have any older Tab), it won't matter for me.
Click to expand...
Click to collapse
Just attempted to OTA update on my Tab S7+ after making a backup, and it failed. When it rebooted to start applying the update, it booted into recovery to start flashing, but since I have TWRP installed, it booted to that instead, went straight to the main menu, and didn't apply the update. It's extremely ironic; my tablet says it's running unauthorized software and will no longer receive firmware updates, but it also says my device status is official and allows me to download and install updates if I check for them (it'll even mention there's an update available without having automatic download installed).
I rebooted to system, it said they the update failed, and prompted me to download the update again and try again. I can't tell if anything got affected since it seems like because the update failed, nothing got applied or changed. This makes me slightly less willing to try and OTA update on the Tab S8+. However, since the stock recovery is still in place (no TWRP yet), the update process would probably go a long smoother. Not to mention, if something was to go wrong, and I needed to flash patched firmware again, I could just flash HOME_CSC instead of the regular CSC so I can keep my data. There's no guarantee that will work, as a failed update could require my system to prompt me to factory data reset anyway, but it's definitely an option that's available.
I'll backup whatever I can before attempting this, and I'll post the results later.
Answer would be no, doing OTA requires bootloader to be locked. But since you rooted, then you have unlocked the bootloader. So if your tab s8+ has locked bootloader then OTA will pass without a problem.
Jake.S said:
Answer would be no, doing OTA requires bootloader to be locked. But since you rooted, then you have unlocked the bootloader. So if your tab s8+ has locked bootloader then OTA will pass without a problem.
Click to expand...
Click to collapse
Really? I thought having an unlocked bootloader would be a non-issue since you can flashing official and unofficial firmware with an unlocked bootloader. Not to mention that the recovery has remained unaffected, and stock recovery needs to be accessed to apply the update.
SavXL said:
Really? I thought having an unlocked bootloader would be a non-issue since you can flashing official and unofficial firmware with an unlocked bootloader. Not to mention that the recovery has remained unaffected, and stock recovery needs to be accessed to apply the update.
Click to expand...
Click to collapse
when unlocking bootloader you have to manually flash the stock firmware. Since OTA becomes unavailable when bootloader is unlocked. So if root is done in for example android 12 and you get a monthly patch then it will revoke the root since root usually modifies the OS files and gives you the root access sort off and flashing a update will write over those files and your root privileges will be removed.
Jake.S said:
when unlocking bootloader you have to manually flash the stock firmware. Since OTA becomes unavailable when bootloader is unlocked. So if root is done in for example android 12 and you get a monthly patch then it will revoke the root since root usually modifies the OS files and gives you the root access sort off and flashing a update will write over those files and your root privileges will be removed.
Click to expand...
Click to collapse
Huh. I thought that doing an OTA update wouldn't remove anything that was already a part of the system and would just just update whatever needed to be updated and called it a day. With the method of patching the firmware and flashing it, I assume root would just be a regular part of the system, and an OTA update wouldn't affect it. Odd...
SavXL said:
Huh. I thought that doing an OTA update wouldn't remove anything that was already a part of the system and would just just update whatever needed to be updated and called it a day. With the method of patching the firmware and flashing it, I assume root would just be a regular part of the system, and an OTA update wouldn't affect it. Odd...
Click to expand...
Click to collapse
That is because your normal access is only admin not root. So it has almost full rights, but when you add root access it is mostlikely a modification that you have to do, either by a command or flashing a file. But updating the OS will revoke the root since method you used becomes unavailable for next update which is why it can reset your changes backwards so your root privileges becomes lost and your access is back to default as before. But I wouldn't touch bootloader since doing that also bricks KNOX so features for KNOX will become permanently disabled since it requires a working Knox chip to work, but since KNOX chip fuse becomes blown when bootloader is unlocked then feature like Samsung pass, samsung secret folder and such will no longer work.
Jake.S said:
That is because your normal access is only admin not root. So it has almost full rights, but when you add root access it is mostlikely a modification that you have to do, either by a command or flashing a file. But updating the OS will revoke the root since method you used becomes unavailable for next update which is why it can reset your changes backwards so your root privileges becomes lost and your access is back to default as before. But I wouldn't touch bootloader since doing that also bricks KNOX so features for KNOX will become permanently disabled since it requires a working Knox chip to work, but since KNOX chip fuse becomes blown when bootloader is unlocked then feature like Samsung pass, samsung secret folder and such will no longer work.
Click to expand...
Click to collapse
Turns out you were absolutely correct. I downloaded and attempted to install the update, it booted into the stock recovery and got to 25% before erroring out. It booted back into Android and said that the update failed. Thankfully, nothing ended up getting removed or corrupted, and I still have root access. Guess I gotta stick to finding the latest firmware and patching it. ¯\_(ツ)_/¯

Categories

Resources