Related
kernels work properly on both IZS & ICS
main features: swap & zram support, undervolting, wided frequencies' scale 200Mhz-1.1Ghz
swap usage is strongly not recommended, as it causes lags in UI, zetram, otherwise, is almost a musthave.
wonna announce in advance, that dafna_v4.* would be (soon, i hope) on the latest 3.9.4 stable linux sources.
dafna _v3.3:
haven't changed a byte in code - only trickstering with linaro's commandline parameters.
results could be seen by eye; according to tests dafna_v3.3 makes now on lionheart even larger figures than diana_0.3 did on performance.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
sicdezmond (from 4pda.ru) suggests that it may be usefull before installing this version to wipe cache & dalvik.
dafna_v3.2:
v 3.1 + additional undervolting of 800 Mhz.
rebuilt on the latest versions - android-ndk-r8e & gcc 4.7, theoretical and/or practical achivements of this rebuilding had to be finded yet.
due to the widely known gcc 4.7 bug, wifi module does not compile properly (any help or ideas for any workaround would be greatly appreciated), but module from the previous version of dafna could be just copied to /etc/wifi (proper permissions 755 had to be checked/set, of course).
overall feeling: it's much quicker and has lower power consumption than dafna_3.1.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
dafna_v3.1:
v3 + upper limit changed to undervolted 1.1 Ghz according to lgeob's (from 4pda.ru) idea of frequency's changeling.
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
dafna_v3:
v2 + tuned undervolting + changing of lowest frequency to 20Mhz (also added upper limit 1.1Ghz is recognized, but not used by the system).
necessary tunings (without them rom would lag or even become unstable/freezed): lionheart, bfq, cache 2Mb, aggressive OOM, seeder, zram.
Historical review:
dafna_v2:
v1+ undervolting of wifi + disabling ipv6 + disabling ethernet in company with a pair of not needed TCP protocols.
dafna_v1:
based on diana_v.3 by Huexxx, swap + zram, light undervolting after lgeob's ideas, disabling of most of the kernel's debugging.
Does this work on izs (4.0.4)?
Sent from my IZS Black with XDA App.
thanks for showing a missing point in description, edited.
kernels were tested on izs 0.2, izs 0.4, ics 30b-f.
Will give a try...
Sent from my IZS Black with XDA App.
It works on trasmusic ics rom too.
Btw how to set up those tunables?
I know about governors but dunno which app is compatible with the kernel.
Edit: nvm I just tried trickster mod and it works ok for now.
Grakel said:
It works on trasmusic ics rom too.
Btw how to set up those tunables?
I know about governors but dunno which app is compatible with the kernel.
Click to expand...
Click to collapse
any app you like.
the simpliest and easiest way is to set it up with the init.d scripts (seeder, of course, had to be only installed).
as to the apps - android tuner, android trickster, no-frills CPU (for example) - most of them can tune partly required, but none can tune all mentioned.
Great job mate.I'll test it on Trasmusic v30f.Hope that oc is stable
Edit: Instable for me.Games are force closing and some apps too
Sent from my LG-P970 using Tapatalk 4 Beta
adm_ said:
any app you like.
the simpliest and easiest way is to set it up with the init.d scripts (seeder, of course, had to be only installed).
as to the apps - android tuner, android tricster, no-frills CPU (for example) - most of them can tune partly required, but none can tune all mentioned.
Click to expand...
Click to collapse
On my izs worked 100% with all tunes...
Thanks man, great job,:laugh:
Please, share your sources. It's mandatory, even more if you are using my repo.
Regards.
Huexxx said:
Please, share your sources. It's mandatory, even more if you are using my repo.
Regards.
Click to expand...
Click to collapse
Oh my.
Sent from my LG-P970 using xda app-developers app
Huexxx said:
Please, share your sources. It's mandatory, even more if you are using my repo.
Click to expand...
Click to collapse
they were already shared - it's just a two-move problem, shocked a little that you didn't solved it yourself. ;-P
adm_ said:
they were already shared - it's just a two-move problem, a little shocked that you didn't solved it yourself. ;-P
Click to expand...
Click to collapse
Sorry but I don't catch you...
Can U put the link on OP?
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
The kernel source is published in the original thread, on those russian forums.
I grabbed the link, here it is:
https://github.com/admzzz/dafna
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
Hey ur back!
Sent from my LG-P970g using Tapatalk 4 Beta
Huexxx said:
Sorry but I don't catch you...
Can U put the link on OP?
Click to expand...
Click to collapse
just guessing, what you do not know how to use - hyperlinks or browsers? ;-P
there is one already (it's there from the beginning of my post, btw), try to follow it and read carefully - URLs are in plain english, if you haven't heard it before. ;-P
adm_ said:
just guessing, what you do not know how to use - hyperlinks or browsers? ;-P
there is one already (it's there from the beginning of my post, btw), try to follow it and read carefully - URLs are in plain english, if you haven't heard it before. ;-P
Click to expand...
Click to collapse
No need to be so sarcastic.
And no, there is no direct link to github in your OP.
The only link present in your OP is a russian webpage, where there IS a link to github.
So I know, it was just two clicks to get the github link, but could you post it also in the xda thread OP? Its not such a hard task, isnt it? =)
Grakel said:
So I know, it was just two clicks to get the github link, but could you post it also in the xda thread OP? Its not such a hard task, isnt it? =)
Click to expand...
Click to collapse
no, it is, if you wonna check some mental abilities of others. ;-P
have a nice day, folks, as i just got one.
adm_ said:
no, it is, if you wonna check some mental abilities of others. ;-P
have a nice day, folks, as i just got one.
Click to expand...
Click to collapse
Wth dude... are you on your period?
Halleluja he is alive
Gesendet von meinem LG-P970
Please leave the fights,and give feedback about the kernel to people interested.
AGGRESSION V2 RC1
This mod is to increase performance on samsung based 4.3 rom(official & leaked)
Q. what is this mod?
A. basically just a bunch of init.d tweaks, some build.prop, kernel tweaks and binaries.
Q. is this stable?
A. yes. however i always recommend backing up before hand.
Q. what does it do?
A. i could go on for ages but it fixes the long wait for the device to wake, quicker booting time(not on first boot), sets the governer to ondemand
at boot, enables the entropy pool, improves scrolling, touch, internet speed, better LMK config etc...
Click to expand...
Click to collapse
DOWNLOADInstallation1- Boot into recovery
2- Install AGGRESSION-V2-RC1.zip
3- Reboot
4- MOST IMPORTANTLY ENJOY THE SPEED & SMOOTHNESS
Click to expand...
Click to collapse
XDA:DevDB Information
Aggression, a Tool/Utility for the Samsung Galaxy S III I9300
Contributors
ricky310711
Version Information
Status: Testing
Current Stable Version: V2 RC1
Stable Release Date: 2013-11-07
Created 2013-11-07
Last Updated 2013-11-09
only for s3?
diddsen said:
only for s3?
Click to expand...
Click to collapse
it can be used on other devices with a cpu approximately the same GHZ as the s3...
otherwise a device with more this would slow the performance
a device with less, who knows what could happen
Why "Ondemand"?
I wish that could be removed. Because many people prefer zzmove as it is a very much improved one.
Sent from my GT-I9300 using Tapatalk
supreethms said:
Why "Ondemand"?
I wish that could be removed. Because many people prefer zzmove as it is a very much improved one.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
i will add aroma installer next version to choose the governor.
ricky310711 said:
i will add aroma installer next version to choose the governor.
Click to expand...
Click to collapse
Thanks.
Sent from my GT-I9300 using Tapatalk
supreethms said:
Why "Ondemand"?
I wish that could be removed. Because many people prefer zzmove as it is a very much improved one.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You can remove it yourself from the script can't you?
---
Thanks for sharing, dev. A couple of notions:
In post #1 aggression is sometimes spelled correctly, sometimes with just one g.
And maybe add some information about possible incompatibilities with other mods. For example this includes entropy generator which conflicts with seeder and CrossBreeder.
amppen said:
You can remove it yourself from the script can't you?
---
Thanks for sharing, dev. A couple of notions:
In post #1 aggression is sometimes spelled correctly, sometimes with just one g.
And maybe add some information about possible incompatibilities with other mods. For example this includes entropy generator which conflicts with seeder and CrossBreeder.
Click to expand...
Click to collapse
the "g" and "s" key isnt all the best on my pc, thanks for picking up on it!
and sure, ill update it soon
Nice work. I'm using neatrom 4.3 and lock screen is good.
andrewwright said:
Nice work. I'm using neatrom 4.3 and lock screen is good.
Click to expand...
Click to collapse
good to hear positive feedback!
Would like to be able to pick what gov. so looking forward to that.
andrewwright said:
Would like to be able to pick what gov. so looking forward to that.
Click to expand...
Click to collapse
will more then likely be in RC2
what happens if yank aroma settings made... what has priority?
diddsen said:
what happens if yank aroma settings made... what has priority?
Click to expand...
Click to collapse
i wouldnt use this with yank kernel.. im not sure how the system will respond to multiple kernel tweaks with different governors..
supreethms said:
Why "Ondemand"?
I wish that could be removed. Because many people prefer zzmove as it is a very much improved one.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
is zzmove governor with yank kernel?
ricky310711 said:
is zzmove governor with yank kernel?
Click to expand...
Click to collapse
yes, it is
bornlivedie said:
yes, it is
Click to expand...
Click to collapse
Didn't change the zzmove to ondemand. Good
ricky310711 said:
is zzmove governor with yank kernel?
Click to expand...
Click to collapse
I use it on Yank's kernel Yes. But even temasek's kernel and boeffla kernel has zzmove i suppose. I'm sorry i don't have much information.
---------- Post added at 01:05 AM ---------- Previous post was at 01:04 AM ----------
amppen said:
You can remove it yourself from the script can't you?
---
Thanks for sharing, dev. A couple of notions:
In post #1 aggression is sometimes spelled correctly, sometimes with just one g.
And maybe add some information about possible incompatibilities with other mods. For example this includes entropy generator which conflicts with seeder and CrossBreeder.
Click to expand...
Click to collapse
Well. Sir, i don't know much about the scripts. So, i was trying to give a suggestion to the OP.
I hope you did not misunderstand the context of my post.
Q. what does it do?
A. i could go on for ages but it fixes the long wait for the device to wake
Click to expand...
Click to collapse
How exactly is this achieved? The only way I know of to achieve this is to build in a wakelock, so the device is not going to deep sleep anymore which results in no wake lag but also in more battery consumption.
Does this work with an additional wakelock or is there something else involved to fix the wake lag?
Scarface1991 said:
How exactly is this achieved? The only way I know of to achieve this is to build in a wakelock, so the device is not going to deep sleep anymore which results in no wake lag but also in more battery consumption.
Does this work with an additional wakelock or is there something else involved to fix the wake lag?
Click to expand...
Click to collapse
+1
Ive been working on a kernel for the p4 wifi tab. My goal was to elimantae lag and increase IO scores.
Changelog 12/16
Update tcp congestion control
Add new governors
Clean code
Add more compiler flags
Adjust voodoo sound.
update writeback
further reduce readahead
enable system wide mounting
new makefile flag + fix derp on entropy commit
patch to aide in hotplugging
avoid depleting of entropy pool
reduce latency
make file optimization
vfp optimization
lower read ahead
small tweak to load avg
reduce some log spam
crc32 additions
compiler optimizations
lower swappiness
finish clocks
fix errors
block: fix infinite loop in __getblk_slow
fifo: Do not restart open() if it already found a partner
add xz
another clock adjustment
adjust vfs_cache_pressure
tweak smp.c
tweak mm/backing_dev.c
adjust makefile
boost clocks
add arm topology
sched: clock wrap bug in 2.6.35-stable kills scheduling
scheduler pick nexthighest task
add io schedulers
improve the group logic
allow pipe compiling
vfp compile with neon
optimize slub
mm tweaks
tweak aio.c to increase io performance
reclaim some ram
disable gentle sleepers enablearch power
increase readahead
linaro fix
Bugs
Reboot from roms does not work properly. Need to reboot manually
Download p4 wifi
http://d-h.st/Db5
MY source
https://github.com/thicklizard/p4wifi
Download p4 7500
http://d-h.st/n4n
thanks:
pershoot
AAcount
for all the support they have givento this device
Incredible this is the extra boot my tablet needs, i'm using kasper's omni rom and it has always been extremely smooth, now with a lower ram usage and some tweaks, it's even better ! thank you!
DefQoN_BE said:
Incredible this is the extra boot my tablet needs, i'm using kasper's omni rom and it has always been extremely smooth, now with a lower ram usage and some tweaks, it's even better ! thank you!
Click to expand...
Click to collapse
i installed this kernal and can no longer get root. Are you having this problem. I am on kaspers Omni rom as well.
I had the same issue and had to re-flash the rom. Looking at the file, it looks to be for CM based rome only.
Most if not all modern aosp Roms like aokp, pacman, and others use the same kernel source. I am using a cm10.2 based rom on my tablet but, a kernel should not effect superuser. What errors are you getting? Have you tried updating Superuser or supersu which ever one is installed?
When I tried to run Titanium Backup, but it kept telling me that it did not have root.
I tried installing and updating each of the Superuser and SuperSU separately without success. When I re-flashed the PAC 4.3 rom, things went back to normal.
Flashed UPDATE-SuperSU-v1.80 will gain root again......
rogconnect said:
Flashed UPDATE-SuperSU-v1.80 will gain root again......
Click to expand...
Click to collapse
Thanks! :good: Do you have the link for the file?
Dreameagl said:
Thanks! :good: Do you have the link for the file?
Click to expand...
Click to collapse
http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip
How about for P7500?
Is there a kernel like this for P7500?
AJtheAndroidNoOb said:
Is there a kernel like this for P7500?
Click to expand...
Click to collapse
I could make one. Just will need a willing tester.
thicklizard said:
I could make one. Just will need a willing tester.
Click to expand...
Click to collapse
I can test it.
Sent from my GT-P7500 using Tapatalk HD
s14tam said:
i installed this kernal and can no longer get root. Are you having this problem. I am on kaspers Omni rom as well.
Click to expand...
Click to collapse
Dreameagl said:
I had the same issue and had to re-flash the rom. Looking at the file, it looks to be for CM based rome only.
Click to expand...
Click to collapse
Nope, i have no issues at all, flashed it and works perfect since day one, still using same ROM and this kernel, it's just perfect for me like it is now
eushaun99 said:
I can test it.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
I added a link in the op. Please test and confirm all is well.
DefQoN_BE said:
Nope, i have no issues at all, flashed it and works perfect since day one, still using same ROM and this kernel, it's just perfect for me like it is now
Click to expand...
Click to collapse
I think I must have had some other issue. I had to do a wipe and re install and now everything works great.
Sent from my GT-P7510 using XDA Premium HD app
Waiting for the response
I'm still waiting for the response eushaun is gonna give
AJtheAndroidNoOb said:
I'm still waiting for the response eushaun is gonna give
Click to expand...
Click to collapse
Why? Just flash it. It works perfectly fine for me. No root issues at all.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
Why? Just flash it. It works perfectly fine for me. No root issues at all.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
So the version I posted last night for the 7500 is all good? There really is no reason it wouldn't be just needed confirmation.
thicklizard said:
So the version I posted last night for the 7500 is all good? There really is no reason it wouldn't be just needed confirmation.
Click to expand...
Click to collapse
Yup, no problems at all.
Sent from my GT-P7500 using Tapatalk HD
Any difference?
eushaun99 said:
Yup, no problems at all.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
What difference did you see after you flashed? is it better than one packed with from bee_gee's ROM?
Roms built using the ArchiDroid Optimisations
Disclaimer:- I am not responsible for anything that you do to your device by flashing my zips, i provide them as-is, anything you do is your risk and i take no responsibility, by downloading the zips you agree to this statement.
For those who do not know what the optimisations are it is just a commit that intends to increase the performance of a ROM by using different optimisations at code level, more information on that can be found Here It boasts a supposed increase in performance by up to 6x.
Click to expand...
Click to collapse
I'll be building updates when i have the time too (make a request if you want a certain ROM added) The builds will be much larger then the normal versions as they are odex'd etc. I am using the Unofficial P880-Dev sources only unless specified otherwise and using 4.8-sm to build the Rom, and 4.7-sm to build the kernel.
Click to expand...
Click to collapse
Downloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/Liquid%20Smooth%20-%20AD/[/url]
PacMan
Code:
[url]https://s.basketbuild.com/devs/Absol/PacMan%20Rom%20-%20AD/[/url]
Paranoid Android (AOSPA-Legacy)
Code:
[url]https://s.basketbuild.com/devs/Absol/Paranoid%20Android%20-%20AD/[/url]
Omni-Rom
Code:
[url]https://s.basketbuild.com/devs/Absol/Omni%20Rom%20-%20AD/[/url]
CyanogenMod 11.0
Code:
[url]https://s.basketbuild.com/devs/Absol/CyanogenMod%2011.0%20-%20AD/[/url]
Official Sources - Pending
CarbonRom
Code:
[url]https://s.basketbuild.com/devs/Absol/Carbon%20Rom%20-%20AD/[/url]
NamelessRom
Code:
Pending
Team Win Recovery 2.7.1.0 MultiRom & Normal
Code:
[url]https://s.basketbuild.com/devs/Absol/Team%20Win%20Recovery%20Project/[/url]
http://forum.xda-developers.com/showthread.php?t=2754997 - OT of Commit
https://github.com/P880-dev/android_kernel_lge_x3 - Kernel Source
https://github.com/P880-dev/ - All Sources
Click to expand...
Click to collapse
Hid3away said:
Roms built using the ArchiDroid OptimisationsDownloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/LiquidSmooth-AD/[/url]
Click to expand...
Click to collapse
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
ze7zez said:
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
Click to expand...
Click to collapse
That's still fine, it's just the next one is more up-to-date and odex'd.
The build from yesterday was not odex'd.
Sorry for the inconvenience..
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
dimi89 said:
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
Click to expand...
Click to collapse
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
root apps could not get root permission on your cm11 rom
~MaX~ said:
root apps could not get root permission on your cm11 rom
Click to expand...
Click to collapse
Have you tried flashing a SU zip? Setting root perms to Apps and ADB? Setting auto response to Allow?installing SuperSU from playstore and using that to install/manage root? Google'd the problem to see if other devices had that issue? Did you try clean flashing? Did you try a custom kernel?
no?
Anyways, Omni is built Gonna build TWRP 2.7.1 whilst i have it synced anyways.. Don't know if Adam has or not already, links in OP for OmniRom.
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
:good: Downloading OMNI
KrisJoe said:
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
PA (AOSPA-LEGACY) is sync'd and building now thou
Normal AOSPA, like pure PA builds, but it has camera and Audio Issues /: Not sure which adds and removes i need, i followed the tutorial but it's outdated i think?
Hid3away said:
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
Click to expand...
Click to collapse
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
devilozzo said:
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
Click to expand...
Click to collapse
The thread has [TESTING] in the title for a reason
In all honesty, i can't tell if it does make a difference, but it's all down to the feel of the ROM...
O3 makes file bigger with chance of increased performance
O2 makes file smaller with chance or worse performance.
O3 is clear choice.
It's testing phase, you tell me if it's faster or slower
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Try using this app. Very usefull in your case.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Sent from my LG-P880 using XDA Premium 4 mobile app
---------- Post added at 05:10 PM ---------- Previous post was at 05:01 PM ----------
Twrp 2.7.1.0 works.
Sent from my LG-P880 using XDA Premium 4 mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
No i can't be bothered haha
there is a great free Root app called Flashify hat allows flashing .img files on the device, search it up on the playstore, works with boot and recovery images, and it's working perfect on our p880
Here's the link if your still too lazy to search it up on play
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Can you add Carbon ROM, please ?
SpyKnife said:
Can you add Carbon ROM, please ?
Click to expand...
Click to collapse
Of Course i can mate, it's in the queue now, once PA's finished, it's gonna be Pac-Man, and then it's CyanogenMod Official, and then it will be Carbon for you mate
for those who want to install recovery without pc you can always use terminal emulator:
rename your image to TWRP_2.7.1.0.img and have it placed in Download folder
su
cat /sdcard/Download/TWRP_2.7.1.0.img >/dev/block/mmcblk0p1
sync
EDIT: Forgot the one in the end.
Should be fine now, sorry.
Sent from my LG-P880 using XDA Premium 4 mobile app
Hid3away said:
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
Click to expand...
Click to collapse
Sure, I'm perfectly fine with it. Keep up the good work!
Adam77Root said:
Sure, I'm perfectly fine with it. Keep up the good work!
Click to expand...
Click to collapse
Thankyou!
Also, PA is now built and uploaded! 400MB/s upload
Gigabit connection or something like that, it's so quick :3
Download link is in OP
If anyones interested, i'm using this company until i find a free alternative: https://www.digitalocean.com/?refcode=1a1e82c1521c
Very good service
Delete post
Sweet
Sent from my SM-G950F using Tapatalk
congratulations n good luck.
:cyclops:
Will flash aosp,just to test... @sdiown,what rom you running?
Calvin.manneson said:
congratulations n good luck.
:cyclops:
Will flash aosp,just to test... @sdiown,what from you running?
Click to expand...
Click to collapse
I tested on crDroid, works perfect.
bustyouup4free said:
Sweet
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Thanks
Calvin.manneson said:
congratulations n good luck.
:cyclops:
Will flash aosp,just to test... @sdiown,what rom you running?
Click to expand...
Click to collapse
Hope you enjoy it!
Delete post
I just tested it for herolte, RR, not the new tree. It successfully boots up, I will report if I find any other issue. Thanks for the kernel.
Wowowowowow another one for aosp roms, now with wakelocks and voltage control! Flashing aokp right now (no substratum issues) will report back on how it goes after a few cycles
Tested on RR build 07/18 and working fine.
But there is no option for led fading!
Good work?
Missing quite a few CPU governors
Installed on RR (7/29) and doesnt seem to boot.
Galaxy S7 G930F International variant.
kornelkahh said:
I just tested it for herolte, RR, not the new tree. It successfully boots up, I will report if I find any other issue. Thanks for the kernel.
Click to expand...
Click to collapse
Thanks, enjoy it
iOrpheus06 said:
Wowowowowow another one for aosp roms, now with wakelocks and voltage control! Flashing aokp right now (no substratum issues) will report back on how it goes after a few cycles
Click to expand...
Click to collapse
Waiting for your feedback
ahmad.gh1 said:
Tested on RR build 07/18 and working fine.
But there is no option for led fading!
Good work
Click to expand...
Click to collapse
Thanks, I will lookup it today.
sooyongjie said:
Missing quite a few CPU governors
Click to expand...
Click to collapse
Which one? I will add it on the next version
KawaiiBear said:
Installed on RR (7/29) and doesnt seem to boot.
Galaxy S7 G930F International variant.
Click to expand...
Click to collapse
It's because it doesn't run on new tree
sdiown said:
It's because it doesn't run on new tree
Click to expand...
Click to collapse
Can you make run on the new tree ? Also is the smartmax the default governor?
Thanks for your work.
Zakaria.R said:
Can you make run on the new tree ? Also is the smartmax the default governor?
Thanks for your work.
Click to expand...
Click to collapse
For now I cant., Because new tree isn't that stable. So I'll wait until new tree is stable. Smartmax isn't default governor.
Sent from my SM-G935F using Tapatalk
sdiown said:
For now I cant., Because new tree isn't that stable. So I'll wait until new tree is stable. Smartmax isn't default governor.
Click to expand...
Click to collapse
Oh alright, hope things will work out soon, thank you for your efforts ??
Does enforcing mode work with this kernel? If not, are planning to implement it?
It was a short period of time but I can see the SOT is fine with normal usage (streaming, gaming, browsing). I just dont know why aosp kernels on s7/edge hate facebook app so much that the big cluster maxes out its frequency, resulting in an overheating and massive drain when using fb app and would require a reboot to get it back to lower frequencies.
A few more optimizations then this would be a better kernel than the ones included in rom.zips
ahmad.gh1 said:
Tested on RR build 07/18 and working fine.
But there is no option for led fading!
Good work
Click to expand...
Click to collapse
This feature will be available on latest version, altought im waiting all of you to my telegram channel for future updates. I will close this thread for some reasons. :crying:
https://t.me/unofficialfo
Thread closed on OP's request.
Regards
Vatsal,
Forum Moderator.