[Q] using RUU on HTC One M8 HK - Sprint HTC One (M8)

I have a rooted htc one m8 hk edition with S-On, I would like to install the new update that sprint rolled out so I was thinking about using the RUU from another thread here. My question is, since I have the HK edition can i install the RUU without S-Off? I noticed that SuperCID was required for the non hk version only and was not required for my version. Is this correct? Also will the RUU return me to 100% stock? I couldn't post this in the RUU thread itself due to being new to xda, sorry for the inconvenience. Thanks!

cristhefur said:
I have a rooted htc one m8 hk edition with S-On, I would like to install the new update that sprint rolled out so I was thinking about using the RUU from another thread here. My question is, since I have the HK edition can i install the RUU without S-Off? I noticed that SuperCID was required for the non hk version only and was not required for my version. Is this correct? Also will the RUU return me to 100% stock? I couldn't post this in the RUU thread itself due to being new to xda, sorry for the inconvenience. Thanks!
Click to expand...
Click to collapse
You can use the RUU with S-ON as long as it is not an older version than what is already on your phone - I believe you are probably talking about 1.54.654.9 right? Check the about settings on your phone to see if you have upgraded from that (1.54.654.13 or 1.54.654.15 or the 2.16 something).
If the phone version is newer, you will not be able to use the RUU without S-OFF. Since you actually have the HK version, you will not need to change your CID. Successfully running the RUU will flash all the major partions, radios, and more and will bring you completely back to stock. It will also wipe your data/media partition (internal SC card) so make sure you backup anything you need to keep.

Thank you so much for your response it was exactly what I needed. If I wanted to remove the tampered flag could I do it before flashing the RUU? Or will that get removed along with the root in the process? Thanks again!
Sent from my 831C using XDA Free mobile app

cristhefur said:
Thank you so much for your response it was exactly what I needed. If I wanted to remove the tampered flag could I do it before flashing the RUU? Or will that get removed along with the root in the process? Thanks again!
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
The RUU will actually remove the TAMPERED banner because that flag is in mmcblk0p6, named "pg2fs", which is one of the images that the RUU overwrites. UNLOCKED, if you have it, will remain because that flag is mmcblk0p2, named "pg1fs" which does not get overwritten by the RUU. It can be removed by hex editing that block with an echo command http://forum.xda-developers.com/showthread.php?t=2708571
If you are already unlocked, rooted, and have version 1.54.654.9, I would highly suggest you run sunshine and get S-OFF before you run the RUU and update the OTAs; who knows if that exploit will be blocked in further updates.

I see, I'm running 1.54.654.15...can I still s-off with sunshine?
Sent from my 831C using XDA Free mobile app

cristhefur said:
I see, I'm running 1.54.654.15...can I still s-off with sunshine?
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
Not sure since I did it on .9, but I would definitely try it - in fact, if you are on 15, the only way you will be able to run the .9 RUU is if you S-OFF.
Sunshine will not ask you to pay until it has run compatibility tests and verified that it can get S-OFF on your phone - so run it and if you see the message to pay, you are good to go. Having S-OFF just makes things SO much easier.
Just follow the directions on the sunshine site http://theroot.ninja/ and run it entirely from the phone; couldn't be easier. You will need to sideload the APK, easiest if you just run the command "adb install SunShine-latest.apk" after making sure Unknown Sources is checked in your phone settings.

Wait a sec, I thought you said I could use the RUU as long as it was of an older version than the one I currently had..so I was thinking about the .9 RUU since I am on .15... That actually wouldn't work? Sorry I'm a bit confused.
Sent from my 831C using XDA Free mobile app

cristhefur said:
Wait a sec, I thought you said I could use the RUU as long as it was of an older version than the one I currently had..so I was thinking about the .9 RUU since I am on .15... That actually wouldn't work? Sorry I'm a bit confused.
Sent from my 831C using XDA Free mobile app
Click to expand...
Click to collapse
It's the other way around - look a few posts up - there's a "not older than your phone's version" in front of that statement.
To be clear, the .9 RUU will not work on a .15 phone if you are S-ON, you must be S-OFF to do that. However, if you had a .15 RUU (which doesn't exist) it would work on a .9 phone.
Sorry about the confusion. That is just one of the benefits of being S-OFF (not to get sidetracked but my favorite benefit is being able to flash from hboot or fastboot rebootRUU with the bootloader locked)

Ah yes, I see that now- my mistake. I guess I'll s-off tomorrow afternoon then. Thank you very much for your help!
Sent from my 831C using XDA Free mobile app

It's encouraging that the Sunshine devs recently made fixes to deal with Sprint 4.4.3 M8 devices - that's version 2.16.654.4 which is higher than yours, so I think you have a good chance of success. Good luck!

Are you sure that it wouldn't work on a phone that is already updated to a newer software?
I have been on the previous version (final 4.4.2 version), and I have certainly used the RUU to flash back to the .9 version. To my knowledge, the RUU should work regardless of which version that your phone is running. If you're S-On, you just have to be locked & using the stock recovery.

AarSyl said:
Are you sure that it wouldn't work on a phone that is already updated to a newer software?
I have been on the previous version (final 4.4.2 version), and I have certainly used the RUU to flash back to the .9 version. To my knowledge, the RUU should work regardless of which version that your phone is running. If you're S-On, you just have to be locked & using the stock recovery.
Click to expand...
Click to collapse
I'm fairly certain that if you're S-on you can only run a RUU with the same software & firmware version that's installed on the phone. It was that way on the EVO LTE and I'm fairly certain that's how it is now.
Sent from my HTC M8

you may want to try http://firewater-soff.com/ first, if nogo, then sunshine
AarSyl said:
Are you sure that it wouldn't work on a phone that is already updated to a newer software?
I have been on the previous version (final 4.4.2 version), and I have certainly used the RUU to flash back to the .9 version. To my knowledge, the RUU should work regardless of which version that your phone is running. If you're S-On, you just have to be locked & using the stock recovery.
Click to expand...
Click to collapse
nope, you can't flash a older RUU if you're s-on

Oh ok...my apologies.
Is there a reason that my phone boots directly into the bootloader every time that I relock it?
I am unable to boot into anything after using fastboot oem lock, and it only loads the bootloader until I run the RUU (granted, this was before the latest update).

So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?

neudof said:
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
Click to expand...
Click to collapse
The red triangle is indicative of the stock recovery, which was updated with everything else when you did the OTA. Being S-ON with SuperSU means you must have been UNLOCKED at one point - if you are still are UNLOCKED, simply flash custom recovery back onto your device. If not UNLOCKED (if you relocked for the OTA, which is not necessary if S-OFF, not sure about S-ON), you will need to HTCDEV unlock again before flashing the custom recovery.

PillowMetal said:
The red triangle is indicative of the stock recovery, which was updated with everything else when you did the OTA. Being S-ON with SuperSU means you must have been UNLOCKED at one point - if you are still are UNLOCKED, simply flash custom recovery back onto your device. If not UNLOCKED (if you relocked for the OTA, which is not necessary if S-OFF, not sure about S-ON), you will need to HTCDEV unlock again before flashing the custom recovery.
Click to expand...
Click to collapse
Is it possible to flash the recovery from SD card or do I need to use my computer?

neudof said:
Is it possible to flash the recovery from SD card or do I need to use my computer?
Click to expand...
Click to collapse
When you download say TWRP from their webiste, you get an image file (IMG) that is meant to be flashed using fastboot from your computer. But you can rename it to "recovery.img", place that in a zip file along with an android.txt file with specific contents onto your external SD Card, and then you can flash it from the bootloader (if you are S-OFF). The file has to be specifically named as well - e.g., the Sprint HTC One M8 is "0P6BIMG.zip".
If you don't have an external SD Card, you may also be able to flash from the bootloader using a powered USB-OTG cable (like we did on the M7). Again, this is only if you are S-OFF, otherwise you will have to fastboot flash the image from your computer because bootloader flashes with S-ON have to be signed.
One last method that doesn't require S-OFF, is to copy the image file anywhere on internal or external SD cards, then use the "dd" command to copy the image over your recovery block (specific numeric device block depending on phone) using either your computer or a terminal emulator on the phone.
So yeah, you have options.

Update: I achieved S-Off as suggested, locked my boot loader using an adb command from another thread then ran the HK .9 RUU. I went through the 3 updates then took the phone to sprint, had no problems at all. Thanks for your help guys. :thumbup:

Related

Is it possible to go back to Stock - Completely - To sell the phone?

I have a Mint Condition HTC One phone I am trying to sell - Mostly just because I also own a Nexus 4 and love it - and decided I'd rather keep it and use the money on the HTC One on something else.
I'm having a hard time selling it because the "everything is unlocked" is making people scared to buy it.
It's S-OFF, SuperCID, TWRP 2.6.0.1, Bootloader Unlocked, Running 2.24 Firmware and Android Revolution 12.1, Sim Unlocked too.
It's originally a Rogers Canada HTC One
Is there any way (or guide) to completely make it stock again to help sell it? Any help would be appreciated.
Yep, just flash the Rogers RUU (if available) and then you're good to go! If there isn't one then use one of the Nandroids provided and then get the stock recovery and relock the bootloader
don't forget to go back to S-ON after flashing the RUU
herwegan said:
don't forget to go back to S-ON after flashing the RUU
Click to expand...
Click to collapse
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
bigystyle84 said:
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
Click to expand...
Click to collapse
just download the RUU (sorry, don't know if there is one for your carrier), be sure to be s-off, and then run the RUU.exe or flash the RUU.zip.
the RUU will flash stock recovery, stock rom and i think it will even relock your bootloader. and then you'll be able to download OTA-updates again.
last step is to put it back to s-on and you should be done..
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
EnIXmA said:
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks
I'm S-OFF using the Revone Method
I'm on firmware 2.24 and HBoot 1.54 (Still S-Off though)
If anyone has time, can somebody give me a real quick overview on what I need to do? I'll buy ya a beer!
I'm not real familiar with HTC Devices - This was my first experience and to be honest, Right now I'm wishing I didn't do this if I knew before hand I was going to flip it so fast.
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
herwegan said:
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
Click to expand...
Click to collapse
You cant run the RUU with Super CID. You will have to change it to one that matches the RUU you choose before running it, but keep s-off. Then you should be able to use the tool as mentioned above or do all the things manually. You can use my guide if you like:
http://forum.xda-developers.com/showthread.php?p=43458497
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
bigystyle84 said:
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Click to expand...
Click to collapse
you could take the latest open europe RUU (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7), or take an AT&T one.. don't really know which one would be better for your situation you'll know it better
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Click to expand...
Click to collapse
this is also an option. you can flash this nandroid backup through cwm recovery. but then you'd have to manually install stock recovery and lock the bootloader/go back to s-on. why not :good:
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Click to expand...
Click to collapse
you can stay on 1.54 if everything works fine after flashing the older firmware. the "warning text" is related to this thread: http://forum.xda-developers.com/showthread.php?t=2316726
but if you've never installed a custom HBoot you don't have to worry about this when going back to s-on. just check once if the red warning text in the bootscreen is there.
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Click to expand...
Click to collapse
hope it works :fingers-crossed:
crushalot said:
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
Click to expand...
Click to collapse
Hey, I'm trying to do the same thing as OP, and this thread has been the closest thing to my issue. I'm trying to return everything on my phone to stock, however my Canadian carrier is Bell. Currently my HTC One has the bootloader unlocked, is rooted, TWRP recovery, and TrickDroid installed.
If I understand your instructions correctly, what I should do (given I want to restore using a nandroid backup) is:
1) S-Off my phone
2) Change the CID to CWS___001 and run the ATT RUU
3) Change the CID back to my original (BM_001 is what I think it is, do you know how I can make sure? What command to run for ADB?)
4) The Nandroid backup from http://forum.xda-developers.com/showthread.php?t=2207874&highlight=bell+update for my phone is for CWM (it's this one: M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5), does that mean I have to change my recovery from TWRP to CWM at this point?
5) Use fastboot to boot the recovery --> two questions regarding this, 1) why would I not install the .zip I downloaded from step 4? 2) where do I get the recovery.img? Just the one that is in the zip? In which case, shouldn't I also has to boot the boot.img or anything else?
6) I also want to upgrade the radio, should that be done last?
Thanks for all your help!
Lastly, I'm looking for a ROM to flash afterwards, I was wondering if you had any suggestions/know of a ROM that can allow me to use the swipe2sleep features, as well as hold the back touch button to force kill an app.
Just sell it on swappa. They love rooted unlocked modded phones.

[Q] going to stock fail... need 2.24.401.1 nandroid

I got myself in a bit of a dead zone here.
I have my HTC one. Its HTC__001 WWE Europe. It OTA upgraded to 2.24.401.1.
When I saw that you can convert to a GPE I really wanted to check it out specially after users reported success in getting OTA updates. But I quickly realized I needed S-Off and thats not available yet.
I decided to at least take it to a test drive with ARHD GPE 3.0. I downloaded the latest RUU for my device (1.28.401.7) thinking I would need that to get back to stock. I went and unlocked the bootloader at HTC dev. Flashed CWM recovery and flashed ARHD GPE 3.0. Played around with it for a bit and now when I needed to go back to stock.
RUU.exe file got stuck at updating signature then returned 155 unknown. I realized maybe its attempting to downgrade the bootloader so i looked around for a 2.24.401.1 RUU but its not available yet.
I looked at Nandroid backups and found 1.28.401.7 HTC__001 but its UK unbranded. When I restored this version it loaded up but my touch screen didnt work at all. I flashed back ARHD to get touch capability back.
So my question is... Any chance anyone can nandroid backup the stock 2.24.401.1 i need? How can I go to stock now? Am I stuck with custom roms untill atleast s-off or HTC decides 2.24.401.1 RUU should be made available?
Thanks!
+1
Are you s off?? Downgrade your hboot to 1.44 and then flash the ruu for your device....
Sent from my HTC One using xda premium
No unfortunately im s-on... Funny how being a good boy and being s-on HTC rewards me with no option to go back to stock...
Sent from my HTC One using xda app-developers app
LOL............ I am in same postion . want to go back to stock for updates but cant !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.
AllAboutTheCore said:
http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.
Click to expand...
Click to collapse
You cant s-off on hboot 154 yet. Unless I am mistaken.
Like op says we need a nandroid of firmware think that's only way until ruu is releasee ; (
Sent from my GT-I9100 using xda app-developers app
ipmanwck said:
You cant s-off on hboot 154 yet. Unless I am mistaken.
Like op says we need a nandroid of firmware think that's only way until ruu is releasee ; (
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
2 things:
1) I'll quote what I said, I never said S-Off was available .. "Obviously you'll need S-Off for Hboot 1.54 if/when it happens"
2) What I said above for going to stock is a way of doing it, a Nandroid is not the only way.
AllAboutTheCore said:
http://forum.xda-developers.com/showthread.php?t=2224752 ... Flash ROM, install stock recovery, relock bootloader, done. The official firmware will be about soon no doubt so you will be able to fastboot it and have the newest base, stock and all before HTC release it in whatever region.
Obviously you'll need S-Off for Hboot 1.54 if/when it happens in order to remove the tampered flag and change relocked back to locked but what I mentioned above is the closest you'll get without being able to run an RUU.
Click to expand...
Click to collapse
I actually did this and Im running it right now without problems...
But Im not sure id be getting OTAs as the bootloader main ver still says 2.24.401.1 and not 2.24.401.8. I dont think Mike made a 2.24.401.1 available.
Its a bit disappointing. Im fine with having my bootloader tampered and relocked and s-on as long as I got stock running like it should be. i dont understand why HTC gives you the option to unlock ur bootloader to play around with custom firmware but not allow you to go back to stock. im guessing the RUU is on the way but I have my doubts... Just like s-off.
Sent from my HTC One using xda app-developers app
ossman said:
I actually did this and Im running it right now without problems...
But Im not sure id be getting OTAs as the bootloader main ver still says 2.24.401.1 and not 2.24.401.8. I dont think Mike made a 2.24.401.1 available.
Its a bit disappointing. Im fine with having my bootloader tampered and relocked and s-on as long as I got stock running like it should be. i dont understand why HTC gives you the option to unlock ur bootloader to play around with custom firmware but not allow you to go back to stock. im guessing the RUU is on the way but I have my doubts... Just like s-off.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Nah, the stock firmware for 2.24.401.8 is not available yet, only a customised one which would require S-Off anyway. The method I mentioned is the only way at the moment to get as close to stock as possible without being able to go S-Off and flash an older RUU. When Mike gets hold of the stock firmware to post, I'm sure he will ... I can't see any 2.24 RUU's being available seeing that HTC are pushing for a 4.3 release by the end of September, so I'd wait anyways, unless you need to return your device for warranty purposes of course.
As for you getting OTA updates ... I haven't installed the .8 ROM but it shouldn't affect it as the base you are on is still an older base than what you'd be trying to update to but I'm not 100% on that as I haven't flashed it as my device is away for repair lol. I would imagine that the 2.24.401.8 firmware would be about soon enough and then you would be able to revert to stock with the newest base but obviously as you said yourself, without S-Off you wouldn't be able to wipe any trace of you flashing and modding.
I think HTC only allow you to unlock your bootloader because they can void so many warranties that way and bill for repairs lol ... Maybe I'm being cynical but I do agree that they could provide a stock RUU for people to return to stock, without all the hassle of S-Off or waiting months before any suitable RUU is available but sometimes you have to just suck it up and live with what we have lol
ossman said:
I got myself in a bit of a dead zone here.
I have my HTC one. Its HTC__001 WWE Europe. It OTA upgraded to 2.24.401.1.
When I saw that you can convert to a GPE I really wanted to check it out specially after users reported success in getting OTA updates. But I quickly realized I needed S-Off and thats not available yet.
I decided to at least take it to a test drive with ARHD GPE 3.0. I downloaded the latest RUU for my device (1.28.401.7) thinking I would need that to get back to stock. I went and unlocked the bootloader at HTC dev. Flashed CWM recovery and flashed ARHD GPE 3.0. Played around with it for a bit and now when I needed to go back to stock.
RUU.exe file got stuck at updating signature then returned 155 unknown. I realized maybe its attempting to downgrade the bootloader so i looked around for a 2.24.401.1 RUU but its not available yet.
I looked at Nandroid backups and found 1.28.401.7 HTC__001 but its UK unbranded. When I restored this version it loaded up but my touch screen didnt work at all. I flashed back ARHD to get touch capability back.
So my question is... Any chance anyone can nandroid backup the stock 2.24.401.1 i need? How can I go to stock now? Am I stuck with custom roms untill atleast s-off or HTC decides 2.24.401.1 RUU should be made available?
Thanks!
Click to expand...
Click to collapse
i got an nandroid backup for you fully stock unrooted : https://mega.co.nz/#!AUZGkKwC!EAfhUXYAgjpAR42jGzG_mhzWJjwcs1j7R_tm_HPMDAo

[Q] I think I bricked my phone.

So I'm trying to flash a new RUU for GPE HTC One Jelly Bean 4.3. The RUU is suppose to work for unlocked devices; the person who posted the download links had two, with one for unlocked devices and the other for locked devices. I think I messed up somewhere because I had a custom kernel installed via .zip, then booted back to the stock GPE kernel with "fastboot flash boot boot.img"; the system booted up fine but the 3 dot menu was missing so I went back to the customer kernel. The system wouldn't get past the Google screen and now I'm trying to flash the RUU but it won't work. If I do it on my computer via commands, I get "<bootloader> zip info parsing," then "FAILED <remote: 99 unknown fail>". So now I'm in TWRP recovery with the RUU on my SD card; tried flashing it on my phone and it says "Updating partition details...", "E: unable to mount ' /data'", "E: unable to mount internal storage", E: unable to mount ' /data," then lastly "Error flashing zip." I wiped the cache, data, and system; it won't wipe the Dalvik cache and gives me the same error when I do it. Can someone help me?
Edit: When I also try to wipe via "fastboot -w" it comes up with an error saying "FAILED <remote: not allowed>.
You need S-off to ruu to another firmware that's not made for your particular model/carrier.
Once you s-off enter fastboot oem rebootRUU
fastboot flash zip firmware.zip
(Firmware.zip being the actually name of the ruu zip)
It will begin to flash, then fail and say to flush image immediately. Simply press the "up" arrow on keyboard to repeat the exact same command. It will work the second time.
For some reason fastbooting a ruu in that mode always fails the first time, so you have to do it twice without exiting.
Good luck and enjoy
Sent from my HTC One using Tapatalk 2
InflatedTitan said:
You need S-off to ruu to another firmware that's not made for your particular model/carrier.
Once you s-off enter fastboot oem rebootRUU
fastboot flash zip firmware.zip
(Firmware.zip being the actually name of the ruu zip)
It will begin to flash, then fail and say to flush image immediately. Simply press the "up" arrow on keyboard to repeat the exact same command. It will work the second time.
For some reason fastbooting a ruu in that mode always fails the first time, so you have to do it twice without exiting.
Good luck and enjoy
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I think the GPE RUU supports MID: PN0713000 and CID: T-MOB010. http://forum.xda-developers.com/showthread.php?t=2358781
Edit: Oh, never mind; it says S-Off needed...
Any advice on what to do now since my HBoot is 1.54? The HBoot for the latest T-Mobile Sense 5 RUU is 1.44... I'm stuck now...
May be the alcohol but I'm having trouble keeping up lol. You're having questions with the hboot trying to s-off? If you can't s-off, nor ruu BC the firmware doesn't match with the most recent ruu then you may be stuck or hopefully someone with more advanced knowledge can help you a little better
Sent from my HTC One using Tapatalk 2
yorkies88888 said:
I think the GPE RUU supports MID: PN0713000 and CID: T-MOB010. http://forum.xda-developers.com/showthread.php?t=2358781
Edit: Oh, never mind; it says S-Off needed...
Any advice on what to do now since my HBoot is 1.54? The HBoot for the latest T-Mobile Sense 5 RUU is 1.44... I'm stuck now...
Click to expand...
Click to collapse
For some reason Google firmware will flash on certain s-on phones when it shouldn't. First we need to know if this happened.
When booted into the boot loader, is the screen black or white?
Now if there's an RUU available for your cid and mid (an official ruu.exe not an unsigned zip) that is greater than the firmware version currently on the phone, flashing that will fix everything.
If not, head over to original android development and grab a GPE ROM ( you could also use sense or AOSP, but I'm assuming you want GPe) and attempt to flash the ROM in recovery just like you normally would.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2
CoryTallman said:
For some reason Google firmware will flash on certain s-on phones when it shouldn't. First we need to know if this happened.
When booted into the boot loader, is the screen black or white?
Now if there's an RUU available for your cid and mid (an official ruu.exe not an unsigned zip) that is greater than the firmware version currently on the phone, flashing that will fix everything.
If not, head over to original android development and grab a GPE ROM ( you could also use sense or AOSP, but I'm assuming you want GPe) and attempt to flash the ROM in recovery just like you normally would.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2
Click to expand...
Click to collapse
So basically I accidentally put security back on BEFORE flashing back to stock so now I'm stuck here. The bootloader screen is black and since I upgraded to HBoot 1.54 via OTA update for stock Jelly Bean when I was S-Off, there is no compatible HBoot for me since the one for T-Mobile is 1.44 currently. My biggest worries right now is that I screwed something up with the partitions or if there's a bigger issue here because it's saying it can't mount the data and SD card, and I can't even wipe the phone via commands. If it's just the CID, MID, and HBoot not matching, then I'm not worried since I can still flash a custom ROM right?
yorkies88888 said:
So basically I accidentally put security back on BEFORE flashing back to stock so now I'm stuck here. The bootloader screen is black and since I upgraded to HBoot 1.54 via OTA update for stock Jelly Bean when I was S-Off, there is no compatible HBoot for me since the one for T-Mobile is 1.44 currently. My biggest worries right now is that I screwed something up with the partitions or if there's a bigger issue here because it's saying it can't mount the data and SD card, and I can't even wipe the phone via commands. If it's just the CID, MID, and HBoot not matching, then I'm not worried since I can still flash a custom ROM right?
Click to expand...
Click to collapse
This is why going back to s-on is almost always a bad idea. You can't flash any unsigned RUUs or firmware packages now, so you can't return your phone to stock.
It sounds like you may have corrupted your sdcard during all this. Try reformatting it from your PC. This will wipe all your data, but if it's corrupted, it's gone anyway. Then you can push a new rom and kernel and flash.
here is the latest signed RUU for TMOB.
http://forum.xda-developers.com/showthread.php?t=2427325
wwjdd44 said:
here is the latest signed RUU for TMOB.
http://forum.xda-developers.com/showthread.php?t=2427325
Click to expand...
Click to collapse
It's of no use to him; he can't run it because he's on 1.54 and s-on.
iElvis said:
This is why going back to s-on is almost always a bad idea. You can't flash any unsigned RUUs or firmware packages now, so you can't return your phone to stock.
It sounds like you may have corrupted your sdcard during all this. Try reformatting it from your PC. This will wipe all your data, but if it's corrupted, it's gone anyway. Then you can push a new rom and kernel and flash.
Click to expand...
Click to collapse
So even if T-Mobile releases an RUU with HBoot 1.54, I can't go back to stock? And how do I reformat it on my PC? CMD? And can you recommend me a ROM that's closest to stock Sense 5? And do I flash the ROM first or the kernel? Sorry about all the questions; I'm just freaking out right now.
yorkies88888 said:
So even if T-Mobile releases an RUU with HBoot 1.54, I can't go back to stock? And how do I reformat it on my PC? CMD? And can you recommend me a ROM that's closest to stock Sense 5? And do I flash the ROM first or the kernel? Sorry about all the questions; I'm just freaking out right now.
Click to expand...
Click to collapse
You still have an unlocked bootloader right?
Then I would just flash a custom recovery and "format sdcard" from there.
Then "adb push Rom.zip /sdcard/" (or sideload) and flash the Rom.
I personally use ARHD 13.x which is very close to stock Sense 5.
ROMs already include a kernel, so no need to flash separately.
Sent from my HTC One using xda app-developers app
nkk71 said:
You still have an unlocked bootloader right?
Then I would just flash a custom recovery and "format sdcard" from there.
Then "adb push Rom.zip /sdcard/" (or sideload) and flash the Rom.
I personally use ARHD 13.x which is very close to stock Sense 5.
ROMs already include a kernel, so no need to flash separately.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Yes, I have an unlocked bootloader but TWRP doesn't seem to have a "format SD card" option.
Edit: And do you know if it's still possible to use the T-Mobile RUU when they come out with Jelly Bean 4.3 update with HBoot 1.54? Or am I just stuck with custom ROMS now?
yorkies88888 said:
Yes, I have an unlocked bootloader but TWRP doesn't seem to have a "format SD card" option.
Click to expand...
Click to collapse
I haven't used TWRP, but I'm sure it's there somewhere. Usually under advanced.
Might be called something else? What format options does TWRP have? Maybe /data/media
Sent from my HTC One using xda app-developers app
nkk71 said:
I haven't used TWRP, but I'm sure it's there somewhere. Usually under advanced.
Might be called something else? What format options does TWRP have? Maybe /data/media
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Oh, I found it! Thanks! Woot! Do you recommend ARHD 13.x or 21.x?
yorkies88888 said:
Oh, I found it! Thanks! Woot! Do you recommend ARHD 13.x or 21.x?
Click to expand...
Click to collapse
Personal preference. Why don't you try both. 13.x is based on official 4.2.2 and 21.x is based on leaked 4.3 (but still very good)
Just note on 21.0 you have to enter APN settings manually to get mobile data & mms, and there's a bug which won't let you access SIM card contacts.
Sent from my HTC One using xda app-developers app
nkk71 said:
Personal preference. Why don't you try both. 13.x is based on official 4.2.2 and 21.x is based on leaked 4.3 (but still very good)
Just note on 21.0 you have to enter APN settings manually to get mobile data & mms, and there's a bug which won't let you access SIM card contacts.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Well is 13.x compatible with HBoot 1.54? And I have Google's bootloader and when I boot up the phone it has a Google logo on it; will it be able to install and get rid of the Google logo and bootloader? Thanks for the help by the way; I finally got past the corrupt files.
yorkies88888 said:
Edit: And do you know if it's still possible to use the T-Mobile RUU when they come out with Jelly Bean 4.3 update with HBoot 1.54? Or am I just stuck with custom ROMS now?
Click to expand...
Click to collapse
You can't use unsigned RUUs. If T-Mo releases a RUU with 1.54 or later hboot, then yes, you should be able to use it (unless you changed your MID or CID).
yorkies88888 said:
Well is 13.x compatible with HBoot 1.54? And I have Google's bootloader and when I boot up the phone it has a Google logo on it; will it be able to install and get rid of the Google logo and bootloader? Thanks for the help by the way; I finally got past the corrupt files.
Click to expand...
Click to collapse
Yes it is, but you're stuck with the Google bootloader for now, until there is an s-off exploit for 1.54 or T-Mo releases that RUU.
yorkies88888 said:
Well is 13.x compatible with HBoot 1.54? And I have Google's bootloader and when I boot up the phone it has a Google logo on it; will it be able to install and get rid of the Google logo and bootloader? Thanks for the help by the way; I finally got past the corrupt files.
Click to expand...
Click to collapse
It is compatible with 1.54, but I've never tried GPe, so I can't answer that. Don't know if it is firmware, ROM related, or if GPe hboot is different.
Can someone pitch in?
Sent from my HTC One using xda app-developers app
iElvis said:
You can't use unsigned RUUs. If T-Mo releases a RUU with 1.54 or later hboot, then yes, you should be able to use it (unless you changed your MID or CID).
Yes it is, but you're stuck with the Google bootloader for now, until there is an s-off exploit for 1.54 or T-Mo releases that RUU.
Click to expand...
Click to collapse
nkk71 said:
It is compatible with 1.54, but I've never tried GPe, so I can't answer that. Don't know if it is firmware, ROM related, or if GPe hboot is different.
Can someone pitch in?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Well it's a good thing I changed my CID back to T-MOB010 before I put security back on then... I had SuperCID so not like it would've mattered... But thanks for the good news! And the GPE ARHD is compatible because it's Jelly Bean 4.3, but would flashing the ARHD 13.x ROM change the bootloader and start-up screen to HTC instead of Google?
yorkies88888 said:
Well it's a good thing I changed my CID back to T-MOB010 before I put security back on then... I had SuperCID so not like it would've mattered... But thanks for the good news! And the GPE ARHD is compatible because it's Jelly Bean 4.3, but would flashing the ARHD 13.x ROM change the bootloader and start-up screen to HTC instead of Google?
Click to expand...
Click to collapse
No. No rom will change your bootloader or splash screen. You need s-off to do that.

[Q] Bricked and RUU doesn't change anything

So I have bricked my phone and all I want is to go back to stock. I have tried flashing OMJ's 3.04.651.2 firmware through fastboot and it completes it successfully... so it says. When I proceed to reboot, I am yet again taken to the HTC screen, the screen then goes black, after a while the screen shows an HTC one with a red triangle in it. I am desperite, please help!
Relocked
S-on
HBOOT 1.55
Radio 1.00.20.0913_3
OS 3.04.651.2
MacSkizzle said:
So I have bricked my phone and all I want is to go back to stock. I have tried flashing OMJ's 3.04.651.2 firmware through fastboot and it completes it successfully... so it says. When I proceed to reboot, I am yet again taken to the HTC screen, the screen then goes black, after a while the screen shows an HTC one with a red triangle in it. I am desperite, please help!
Relocked
S-on
HBOOT 1.55
Radio 1.00.20.0913_3
OS 3.04.651.2
Click to expand...
Click to collapse
You need to be s-off. Use this.
http://forum.xda-developers.com/showthread.php?t=2496687
Sent from my HTCONE using XDA Premium 4 mobile app
jab74101 said:
You need to be s-off. Use this.
http://forum.xda-developers.com/showthread.php?t=2496687
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can I get s-off? All I can access is my bootloader.
jab74101 said:
You need to be s-off. Use this.
http://forum.xda-developers.com/showthread.php?t=2496687
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I downloaded, extracted, and ran the correct soju but I get an error. It says to run rumrunner again and READ... I don't know what I did wrong. I did this with my phone in fastboot usb mode, is that right?
MacSkizzle said:
Can I get s-off? All I can access is my bootloader.
Click to expand...
Click to collapse
I'm pretty sure that's all you need. But I could be wrong.
TriBeard said:
I'm pretty sure that's all you need. But I could be wrong.
Click to expand...
Click to collapse
When I run the rumrunner program, I type 'Yes' twice then I get an error telling me to run rumrunner again and READ. What did I do wrong?
Recently I was working on returning my phone back to stock and I ended up using OMJ's encrypted 1.29.651.7 (http://forum.xda-developers.com/showthread.php?t=2250904). However, in order to flash an older ruu successfully I also had to trick the phone into believing that an older version was installed. I did it using dd through adb, but I can't find the thread with the info so I'll try to find that.
ok, so here's what I did:
first, I downloaded the encrypted 1.29.651.7 ruu
then, I used this trick to change the version recorded in the phone (I think I had to be root, but I don't remember) http://forum.xda-developers.com/showthread.php?t=2390821
I substituted 1.29.651.7 for the 1.29.651.10 shown in the link
then I relocked the bootloader and flashed the ruu according to the return to stock instructions.
Hopefully this helps you work it out, I'm not sure how much this will help you but it worked for me.
ZHoob2004 said:
Recently I was working on returning my phone back to stock and I ended up using OMJ's encrypted 1.29.651.7 (http://forum.xda-developers.com/showthread.php?t=2250904). However, in order to flash an older ruu successfully I also had to trick the phone into believing that an older version was installed. I did it using dd through adb, but I can't find the thread with the info so I'll try to find that.
ok, so here's what I did:
first, I downloaded the encrypted 1.29.651.7 ruu
then, I used this trick to change the version recorded in the phone (I think I had to be root, but I don't remember) http://forum.xda-developers.com/showthread.php?t=2390821
I substituted 1.29.651.7 for the 1.29.651.10 shown in the link
then I relocked the bootloader and flashed the ruu according to the return to stock instructions.
Hopefully this helps you work it out, I'm not sure how much this will help you but it worked for me.
Click to expand...
Click to collapse
I'll try this tonight when I get home from work, thanks for the input.
ZHoob2004 said:
Recently I was working on returning my phone back to stock and I ended up using OMJ's encrypted 1.29.651.7 (http://forum.xda-developers.com/showthread.php?t=2250904). However, in order to flash an older ruu successfully I also had to trick the phone into believing that an older version was installed. I did it using dd through adb, but I can't find the thread with the info so I'll try to find that.
ok, so here's what I did:
first, I downloaded the encrypted 1.29.651.7 ruu
then, I used this trick to change the version recorded in the phone (I think I had to be root, but I don't remember) http://forum.xda-developers.com/showthread.php?t=2390821
I substituted 1.29.651.7 for the 1.29.651.10 shown in the link
then I relocked the bootloader and flashed the ruu according to the return to stock instructions.
Hopefully this helps you work it out, I'm not sure how much this will help you but it worked for me.
Click to expand...
Click to collapse
This didn't do it either. PLEASE SOMEONE HELP ME
I don't know if you can flash OMJ's firmware if your bootloader is set to "Relocked". I could be wrong but I think what you need to do is unlock it again first and install a recovery. Then flash OMJ's stock firmware from recovery. From there you can probably do the S-OFF process and RUU back to stock.
You do need to be able to boot into your ROM for S-OFF to work, as you start the S-OFF process while the phone is booted up and running.
MacSkizzle said:
This didn't do it either. PLEASE SOMEONE HELP ME
Click to expand...
Click to collapse
Look HERE

HTC One Developer Edition updates/conversion?

I understand that the only differences between HTC One and developer edition is the storage and the unlocked bootloader. I have got HTC Unlocked International Edition (32 GB) from Amazon. Now the KitKat update is going to be released 60 days earlier to the dev edition. Is there a way to convert to a dev edition to receive future updates faster? Would unlocking the bootloader turn the phone into a dev edition? Or those handsets receive the updates according to IME, serial or something? Thanks in advance!
Here's the short version on how to properly convert to Dev Edition and retain future OTA updates. Make sure to back up any data or files on the phone you don't want to lose, as this will wipe your phone and make it like new. Find your current APN settings and write them down just in case your carrier isn't shown as an option when first booting your phone after converting.
Unlock bootloader via HTCDev.com
S-Off (method varies depending on bootloader version, but most would use Rumrunner)
Change CID to BS_US001
If your MID is anything other than PN712000, change it to that.
Run RUU exe file for Dev Edition (available for download on HTCDev.com)
You can leave the bootloader unlocked and S-Off.
EsJayEs said:
Here's the short version on how to properly convert to Dev Edition and retain future OTA updates. Make sure to back up any data or files on the phone you don't want to lose, as this will wipe your phone and make it like new. Find your current APN settings and write them down just in case your carrier isn't shown as an option when first booting your phone after converting.
Unlock bootloader via HTCDev.com
S-Off (method varies depending on bootloader version, but most would use Rumrunner)
Change CID to BS_US001
If your MID is anything other than PN712000, change it to that.
Run RUU exe file for Dev Edition (available for download on HTCDev.com)
You can leave the bootloader unlocked and S-Off.
Click to expand...
Click to collapse
Will this method change to developer edition and will ensure future OTA released for the Developer Edition? Thanks!
Yes it will get OTA , if the last step is to run RUU for Dev edition.
If you install custom recovery/root on top of it, then you will have isssues with OTA.
EsJayEs said:
Here's the short version on how to properly convert to Dev Edition and retain future OTA updates. Make sure to back up any data or files on the phone you don't want to lose, as this will wipe your phone and make it like new. Find your current APN settings and write them down just in case your carrier isn't shown as an option when first booting your phone after converting.
Unlock bootloader via HTCDev.com
S-Off (method varies depending on bootloader version, but most would use Rumrunner)
Change CID to BS_US001
If your MID is anything other than PN712000, change it to that.
Run RUU exe file for Dev Edition (available for download on HTCDev.com)
You can leave the bootloader unlocked and S-Off.
Click to expand...
Click to collapse
Do I have to change to SuperCID at any stage?
No you do not. As per the post from EsJayEs , you only need to change CID to BS_US001
To add to that, there's no reason to ever use superCID. It's takes less than a minute to change your CID. And this is part of what ensures you receive OTA updates.
EsJayEs said:
To add to that, there's no reason to ever use superCID. It's takes less than a minute to change your CID. And this is part of what ensures you receive OTA updates.
Click to expand...
Click to collapse
Thanks... It seems like it's not so common for people to convert to Developer Edition, all the search results I'm getting is about converting to-from GPE. Is that so uncommon right?
It's fairly common. For people on carrier branded phones that like the Sense user interface, the options are Dev Edition or International. Dev Edition has the advantage of significantly faster updates. International version has no real advantage that I know of. At the moment, the international version has a newer version of Sense, but they'll be waiting until January for Android 4.4. But those using the Dev Edition should receive that update any day now (including the updated version of Sense).
EsJayEs said:
It's fairly common. For people on carrier branded phones that like the Sense user interface, the options are Dev Edition or International. Dev Edition has the advantage of significantly faster updates. International version has no real advantage that I know of. At the moment, the international version has a newer version of Sense, but they'll be waiting until January for Android 4.4. But those using the Dev Edition should receive that update any day now (including the updated version of Sense).
Click to expand...
Click to collapse
Thanks!
I have the international version, but I will convert to Dev Ed once the 4.4 update (RUU) is released. Usually when the OTA update is released, the RUU is released at the same time? This is my first HTC phone, so I'm clueless
Hard to say. If they release the RUU, it could be a few days or weeks after the OTA is being pushed. But the OTA will almost definitely come first. If you were to convert now, you'd have verification that your work was done properly when the OTA is pushed and successfully installs.
EsJayEs said:
Hard to say. If they release the RUU, it could be a few days or weeks after the OTA is being pushed. But the OTA will almost definitely come first. If you were to convert now, you'd have verification that your work was done properly when the OTA is pushed and successfully installs.
Click to expand...
Click to collapse
Good to know, I'd start converting then once I hear the OTA is being pushed to find out the result of the conversion quickly. Thanks a lot for all your help!
EsJayEs said:
Here's the short version on how to properly convert to Dev Edition and retain future OTA updates. Make sure to back up any data or files on the phone you don't want to lose, as this will wipe your phone and make it like new. Find your current APN settings and write them down just in case your carrier isn't shown as an option when first booting your phone after converting.
Unlock bootloader via HTCDev.com
S-Off (method varies depending on bootloader version, but most would use Rumrunner)
Change CID to BS_US001
If your MID is anything other than PN712000, change it to that.
Run RUU exe file for Dev Edition (available for download on HTCDev.com)
You can leave the bootloader unlocked and S-Off.
Click to expand...
Click to collapse
Sorry to bother you again with my questions!
At any point do I need to install a custom recovery? I'm not going to root at the moment. What's the best and easy method to install/flash the RUU?
Sent from my HTC One using XDA Premium 4 mobile app
You will need to custom recovery & root to gain S-Off, but once you have ran the dev RUU and the phone is converted, you will not need to root/recovery again.
M_Shaaban said:
Sorry to bother you again with my questions!
At any point do I need to install a custom recovery? I'm not going to root at the moment. What's the best and easy method to install/flash the RUU?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You do not need to install custom recovery.or root. Once you have S-Off (download and use the latest version of Rumrunner http://rumrunner.us/downloads-2/ for this), change your CID to BS_US001 and change your MID to PN712000.
Change your MID using the information here http://forum.xda-developers.com/showthread.php?t=2322820
Changing your CID using the Fastboot command
Code:
fastboot oem writecid BS_US001
After that, run the RUU program downloaded from here http://dl4.htc.com/RomCode/Source_a...3_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe
Again, custom recovery and root are not required (or even useful) for this process. I strongly prefer not to use any custom recovery because it makes future OTA updates impossible.
EsJayEs said:
You do not need to install custom recovery.or root. Once you have S-Off (download and use the latest version of Rumrunner http://rumrunner.us/downloads-2/ for this), change your CID to BS_US001 and change your MID to PN712000.
Change your MID using the information here http://forum.xda-developers.com/showthread.php?t=2322820
Changing your CID using the Fastboot command
Code:
fastboot oem writecid BS_US001
After that, run the RUU program downloaded from here http://dl4.htc.com/RomCode/Source_a...3_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe
Again, custom recovery and root are not required (or even useful) for this process. I strongly prefer not to use any custom recovery because it makes future OTA updates impossible.
Click to expand...
Click to collapse
Thanks again for your response, the MID is mentioned in other posted slightly different than the one you mentioned here - PN0712000. Which one is correct? Or is there no difference between PN712000 and PN0712000? My current MID is PN0714000
Sent from my HTC One using XDA Premium 4 mobile app
Also do I need to relock the bootloader at any stage of the process?
Rumrunner S-OFF must have the phone rooted and requires custom recovery. Can I unroot and install stock recovery before flashing the RUU? Or Installing the RUU will overwrite the custom recovery and installing stock recovery and removing root? If I have to flash the stock recovery to overwrite the custom one, how to do so? Where can I find the compatible latest version of stock recovery?
Do I need to downgrade the hboot at any point? I'm running Windows 8.1 -if that's relevant.
Thanks a lot again for all your help!
Sent from my HTC One using XDA Premium 4 mobile app
M_Shaaban said:
Also do I need to relock the bootloader at any stage of the process?
Click to expand...
Click to collapse
As long as you're S-Off, no you don't. I highly recommend, you do not go back to S-On!!
M_Shaaban said:
Rumrunner S-OFF must have the phone rooted and requires custom recovery. Can I unroot and install stock recovery before flashing the RUU? Or Installing the RUU will overwrite the custom recovery and installing stock recovery and removing root? If I have to flash the stock recovery to overwrite the custom one, how to do so? Where can I find the compatible latest version of stock recovery?
Click to expand...
Click to collapse
Installing RUU, will wipe everything, and install everything back to stock (hboot, recovery, firmware, rom).
M_Shaaban said:
Do I need to downgrade the hboot at any point?
Click to expand...
Click to collapse
If running the RUU gives error 155, then downgrade to hboot 1.44 first; you'll get error 155 on hboot 1.55+
M_Shaaban said:
I'm running Windows 8.1 -if that's relevant.
Click to expand...
Click to collapse
If you have problems with fastboot and/or adb might be best to use Win7. Win8 and 8.1 are known to sometimes have "issues"
nkk71 said:
As long as you're S-Off, no you don't. I highly recommend, you do not go back to S-On!!
Installing RUU, will wipe everything, and install everything back to stock (hboot, recovery, firmware, rom).
If running the RUU gives error 155, then downgrade to hboot 1.44 first; you'll get error 155 on hboot 1.55+
If you have problems with fastboot and/or adb might be best to use Win7. Win8 and 8.1 are known to sometimes have "issues"
Click to expand...
Click to collapse
Thanks a lot for your response! Just to confirm MID for HTC One Developer Edition is it PN712000 or PN0712000? Or there is no difference.
M_Shaaban said:
Thanks a lot for your response! Just to confirm MID for HTC One Developer Edition is it PN712000 or PN0712000? Or there is no difference.
Click to expand...
Click to collapse
yes it makes a difference
It's PN0712000
http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/variants.png
and iirc correctly, you may need to use an engineering hboot to change mid, if the normal hboot doesnt work.
EDIT: an be careful with engineering hboot, they have some very powerful commands, that could brick your phone. i think there's a guide somewhere around here, but i don't have the link right now

Categories

Resources