Database Develop

[Q] Software update won't work on XX DBT BLL5

Hi all, on my i9305 with BLL5 fw when I try and look for updates it remains stuck on research. Anyone else with this fw may try and confirm?
Thanks
Inviato dal mio GT-I9305 con Tapatalk 2

R: [Q] Software update won't work on XX DBT BLL5
Sorry I was wrong with forum section
Inviato dal mio GT-I9305 con Tapatalk 2

Just so you know, bll5 is the latest for DBT
Sent from a Galaxy far away!!

R: [Q] Software update won't work on XX DBT BLL5
Hello, yes I know it is the latest one. But when checking it should say 'no updates available'. Actually in my telephone it does remain on searching, that is the strange thing
Inviato dal mio GT-I9305 con Tapatalk 2

Well go to manage apps and in the all section look for software update and clear the data and cache.
Reboot your device. Then try again
If anything it will update through kies unless you have it rooted or with a custom recovery
Sent from a Galaxy far away!!

R: [Q] Software update won't work on XX DBT BLL5
jetbruceli said:
Well go to manage apps and in the all section look for software update and clear the data and cache.
Reboot your device. Then try again
Click to expand...
Click to collapse
I did it but no way, it keeps on searching for updates with no results
jetbruceli said:
If anything it will update through kies unless you have it rooted or with a custom recovery
Sent from a Galaxy far away!!
Click to expand...
Click to collapse
My phone is rooted, but i also tried with temporary unroot and I always get the same result, the phone stays in searching
Inviato dal mio GT-I9305 con Tapatalk 2

Does your status say modified if so it won't get an update that way
Sent from a Galaxy far away!!

R: [Q] Software update won't work on XX DBT BLL5
Yes it says status modified (as it is rooted).
I am not surprised that I would never really get a fw update this way. But I guess that software update should give me some error message... whilst it does not give any result.
I would like to see what's the behaviour of this feature for somebody else who has a rooted stock fw... just to see if some message pops up or if it keeps on searching an infinite time...
Inviato dal mio GT-I9305 con Tapatalk 2

I would not worry about it since you will not get any updates period as long as you have modified status.
Since your modified now, and the only way to go back is to factory restore and make sure your counter is at 0
Go and try a cool ROM like pandoriam
Sent from a Galaxy far away!!

I9305 BLL5 stuck on software update

Hi all, on my i9305 with BLL5 fw when I try and look for updates it remains stuck on research. Anyone else with this fw may try and confirm?
Thanks
Inviato dal mio GT-I9305 con Tapatalk 2

francanna said:
Hi all, on my i9305 with BLL5 fw when I try and look for updates it remains stuck on research. Anyone else with this fw may try and confirm?
Thanks
Inviato dal mio GT-I9305 con Tapatalk 2
Click to expand...
Click to collapse
Never had that problem.. Try plugging into Kies and see if you can update like that.. Isn't BLL5 the most up to date firmware?

R: I9305 BLL5 stuck on software update
Hello, yes it is the latest. But when checking it should say 'no updates available'. Actually in my telephone it does remain on searching, that is the strange thing
Inviato dal mio GT-I9305 con Tapatalk 2

Hi,
Is your status normal or modified in settings/ about phone?

R: I9305 BLL5 stuck on software update
Modified. I was expecting an error message indeed. No answer at all.
Inviato dal mio GT-I9305 con Tapatalk 2

No way to update with official way. . You have to update with odin
Anyway xxbll5 is the latest 4.1.2 firmware
Envoyé depuis mon GT-I9305 avec Tapatalk

[Q] Does anyone know how to convert from cyanogen mod to stock Samsung?

Do I just have to connect the phone to Kies and will automatically update the phone?
I have the following issue, it's super annoying as the phone is 'blocking' a number from calling it to, even though the number is NOT on the blacklist
http://forum.xda-developers.com/showthread.php?p=41570841
The other problem is that I also can NOT unlock the phone. I called AT&T and they gave me an unlock code, but the unlock code does NOT work on the phone.
For the unlock, I am not sure if it's cyanogen mod problem, or the unlock code is not the right code, but it's frustrating not being able to bring the phone to overseas.
Thank you.

No, you need Odin on Windows and Samsung rom's files.
Inviato dal mio GT-I9000 con Tapatalk 2

what do you mean? Can you please explain further?
Thanks.
popho said:
No, you need Odin on Windows and Samsung rom's files.
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse

It's not easy to explain in few words...
You can search in the development forum or at sammobile site for full instructions.
You basically need a software on your PC (Odin) and a ROM for your country (you'll find it on XDA or sammobile, FW section).
Inviato dal mio GT-I9000 con Tapatalk 2

http://forum.xda-developers.com/showthread.php?t=762403

Need some help about P7320

Hi, I recently bought a Samsung galaxy tab GT-P7320 (the lte one). Can someone tell me which is the latest baseband from samsung? On sammobile i can't understand which is the latest.. And I have another question: how can I enable voice calls? All the guides seems to be only for 7300-7310.. Thanks in advantage! Hope to receive answers..!! Byw
Inviato dal mio GT-P7320 con Tapatalk 2

Up...?
Inviato dal mio GT-P7320 con Tapatalk 2

alinghi100 said:
Hi, I recently bought a Samsung galaxy tab GT-P7320 (the lte one). Can someone tell me which is the latest baseband from samsung? On sammobile i can't understand which is the latest.. And I have another question: how can I enable voice calls? All the guides seems to be only for 7300-7310.. Thanks in advantage! Hope to receive answers..!! Byw
Inviato dal mio GT-P7320 con Tapatalk 2
Click to expand...
Click to collapse
I have the same one, I havent been able to enable phone calls. I installed Arlic's ROM and works fine. But no phone calls.
http://forum.xda-developers.com/showthread.php?t=1923371

ealax said:
I have the same one, I havent been able to enable phone calls. I installed Arlic's ROM and works fine. But no phone calls.
http://forum.xda-developers.com/showthread.php?t=1923371
Click to expand...
Click to collapse
Hi..I tryed as well both: the sammobile one and the arlic's rom. The second is not updated, since it is based on a baseband of october 2012. Samsung released in may 2013 new firmwares that work smoother than arlic's rom.
Inviato dal mio GT-P7320 con Tapatalk 2

I need FW stock WAS-LX1AC02B113, P10 Lite

I need the stock firmware WAS-LX1AC02B113 to restore my Huawei p10 lite because it does not update anymore and reports an error in the installation. Please help me find this firmware.
Inviato dal mio WAS-LX1A utilizzando Tapatalk

There is no 113 firmware on FF there is 114 and higher you can use any.

gm007 said:
There is no 113 firmware on FF there is 114 and higher you can use any.
Click to expand...
Click to collapse
Thanks for having responded, i've already tried the b114 but the problem does not work after a hard reset i get the update ota B120 and when i start the installation fails and says the package is corrupt. I would need the stock firmware to reset the phone to factory conditions
Inviato dal mio WAS-LX1A utilizzando Tapatalk

1987yeah said:
Thanks for having responded, i've already tried the b114 but the problem does not work after a hard reset i get the update ota B120 and when i start the installation fails and says the package is corrupt. I would need the stock firmware to reset the phone to factory conditions
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
How are you trying to install?
Choose full firmware not ota.
Check if the firmware are approved before installing.

gm007 said:
How are you trying to install?
Choose full firmware not ota.
Check if the firmware are approved before installing.
Click to expand...
Click to collapse
I tried the full ota b114, the B115 and the B120 are not approved, but the odd thing is that after hard resetting, I get an update via Ota the B120, which if I try to install I'm out of this screen (photo Of example) and when I start the phone I will also see this screen
Inviato dal mio WAS-LX1A utilizzando Tapatalk

Yes it seems you need the same firmware you have b113 to fix it.
You can try erecovery, while usb connected hold volume up + power.
Or use this methodhttps://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
But p10 lite not supported yet hope it will be soon.

gm007 said:
Yes it seems you need the same firmware you have b113 to fix it.
You can try erecovery, while usb connected hold volume up + power.
Or use this methodhttps://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
But p10 lite not supported yet hope it will be soon.
Click to expand...
Click to collapse
So without the b113 stock firmware I can install another version after unlocking the bootloader and should I fix the problem?
Inviato dal mio WAS-LX1A utilizzando Tapatalk

1987yeah said:
So without the b113 stock firmware I can install another version after unlocking the bootloader and should I fix the problem?
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
Yes you can with this tool.

Okay, but is it okay if firmware finder says it is not approved? So in theory could I also make the debrand with this method?
I could also use the Huawei Multi Tool that is compatible with the P10 Lite
Inviato dal mio WAS-LX1A utilizzando Tapatalk

1987yeah said:
Okay, but is it okay if firmware finder says it is not approved? So in theory could I also make the debrand with this method?
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
Yes you can install any firmware with this tool even if it's not approved and you can rebrand to any region.

gm007 said:
Yes you can install any firmware with this tool even if it's not approved and you can rebrand to any region.
Click to expand...
Click to collapse
I tried to flash a version of Europe so no brand and unfortunately nothing happens I think I go into a kind of bootloop, I do not know if there is a specific firmware or it's all worthless and you have to wait for some other method, anyway I will try again Flash the latest update of my B120 brand
Inviato dal mio WAS-LX1A utilizzando Tapatalk

Ehy and what do you tell me about the oeminfo c432? However I tried to flash a couple of different European firmware and did not work, the only one that worked is the WAS-LX1AC02B114, I do not understand why
Inviato dal mio WAS-LX1A utilizzando Tapatalk