~/PLEASE READ CAREFULLY!!!
To anyone that is S-OFF and wanting to flash firmware I have a safe and quick way that I have tested many times on my device that works flawlessly. Works on all GSM M8's. People have reported it works on Verizon as well.
I take no responsibility for anything going sideways on you but it should not if you have read up on the information in this thread and have read the instructions.
*You can flash any modded firmware zip through the instructions below the same exact way as you would the unmodified firmware way. I have tested this numerous times and all went well. Hope you guys enjoy!
NOTE: If you are on a 2.xx firmware and downgrade to a 1.5xx the phone will shut off half way through the process for about 1-3 seconds to flash the hboot. Then will turn right back on to the new downgraded hboot screen and continue where it left off. Don't worry when this happens as HTC developed this way for a reason. This has been tested many times and works flawlessly.
Here are some pictures of the process. As you can see if you look at the date on the first 2 pictures of the hboot, that is where i begin the process and where I am talking about the screen turning off and on (below) because the new hboot is getting flashed. The rest of the pictures have the new hboot that is flashed and has a newer date and is right when the screen turns back on and the flashing process continues. The pictures are in order during the process. Pictures link below...
SLIDESHOW OF FLASHING PROCESS BELOW
https://www.dropbox.com/sc/71yuprgtunmpx0q/AADYh53UzyVhoYxK0D9-WdkBa
#SuperSu#
https://www.dropbox.com/s/y3mamtoq0m4wjmk/UPDATE-SuperSU-v2.46.zip?dl=0
MD5 : 332de336aee7337954202475eeaea453
https://www.dropbox.com/s/2rdhltt6fsjf72s/UPDATE-SuperSU-v2.45.zip?dl=0
MD5 : 9dbd5253b8f10a8064273dbec3bc78c8
https://www.dropbox.com/s/wdp62a2mcteu9qx/BETA-SuperSU-v2.44.zip?dl=0
MD5 : 8959d8948981232bba1fa14d6040130f
https://www.dropbox.com/s/bx0hfmsmrv29oyw/BETA-SuperSU-v2.43.zip?dl=0
MD5 : fcd4d71f0be4a0bc52344c6cab029fee
https://www.dropbox.com/s/g8guqcmnt22kvso/BETA-SuperSU-v2.42.zip?dl=0
MD5 : cb35e43838d89a29a61d88f3496ee5da
https://www.dropbox.com/s/umh842ib2djhqki/BETA-SuperSU-v2.41.zip?dl=0
MD5 : b110dae1fd13386be216ff77f7fd7937
https://www.dropbox.com/s/niq845lvtv2qmjx/UPDATE-SuperSU-v2.40.zip?dl=0
MD5 : 20d95246299cb7446d025d4df1bd2fa5
https://www.dropbox.com/s/2avk9gxp1wlhciv/UPDATE-SuperSU-v2.37.zip?dl=0
MD5 : 50fafbd60c51eb4bac1e8a6dc47e7360
https://www.dropbox.com/s/dyk20asq161ytzr/UPDATE-SuperSU-v2.36.zip?dl=0
MD5 : 71c9944b6bebb619f63de7691964e8bd
https://www.dropbox.com/s/7rpo41xalcjdg7p/UPDATE-SuperSU-v2.35.zip?dl=0
MD5 : 032245a3b3d745b6ed5a09953fe1ceb3
https://www.dropbox.com/s/8a4q37cebsenc51/BETA-SuperSU-v2.30.zip?dl=0
MD5 : dc9c388757b57a5eaca55b05f741acc2
https://www.dropbox.com/s/hx4pd88aatriebc/BETA-SuperSU-v2.27.zip?dl=0
MD5 : 3da330bcd493b1f7f82256f13f18e09c
https://www.dropbox.com/s/j8os5v3uug0t0os/BETA-SuperSU-v2.25.zip?dl=0
MD5 : ae27849d83deb502c3144b5cc890aaa5
https://www.dropbox.com/s/vnfubef7zg008ie/BETA-SuperSU-v2.23.zip?dl=0
MD5 : 7094e75b0a811846c88e7d9e569d71fc
Firmware Links Below...
https://www.dropbox.com/s/ygn5tjcx533ox1k/firmware_4.16.401.9.zip?dl=0
MD5 : af072d7a6d6bc18ddadae52006ad1ac0
https://www.dropbox.com/s/gxaqttv13fvnpqb/4.16.1540.8_firmware_NoRedText.zip?dl=0
MD5 : 53030b67425af805c478341b7f69cb70
https://www.dropbox.com/s/aiyowtagd3nxuee/RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5.zip?dl=0
MD5 : 42dd6298fa70721494a0b8644696bae1
https://www.dropbox.com/s/6bs9z9xtehvdjzf/RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted.zip?dl=0
MD5 : c6b9feaab8099285c87ef5b9180ffeb4
https://www.dropbox.com/s/7cw41g4zmtrfu1m/3.11.1700.5.firmware.zip?dl=0
MD5 : 6ac5701060b4e15adb0cef7f13eddccd
https://www.dropbox.com/s/5z93i021jngs01c/M8-L-firmware.zip?dl=0
MD5 : 5eeb795e346ed48293f7e45258738c36
BEFORE FLASHING the above ^ L firmware, please convert to the GPE for best compatibility, below. Follow same instructions below for flashing firmware zips to flash the GPE ruu.zip. If you want to flash back to a sense rom, make sure to flash the sense firmware.zip below before flashing a sense rom, because of the different system partition sizes in GPE and sense roms. This firmware zip directly below this sentence is all you need to flash before flashing a sense rom.
https://www.dropbox.com/s/psbckxlwagpbkch/1.54.401.5-W_Splash.zip?dl=0
MD5 : 8830fcbbbec577118f2188742add79bd
^^^^ BACK TO SENSE FIRMWARE.ZIP ABOVE ^^^^
https://www.dropbox.com/s/tomazhso0avo0gs/RUU-HTC_One_M8_GPE_4.4.4-2.12.1700.1_rooted.zip?dl=0
MD5 : c34a19d76ca60655d9a95140574ac143
https://www.dropbox.com/s/y46q9eajive7ruu/3.28.401.9-Firmware-noredtext.zip?dl=0
MD5 : 03744e5c01867471f7de4204f4ab2dcc
https://www.dropbox.com/s/tg0ug894q31tg71/3.28.605.4-vzw-4.4.4-firmware.zip?dl=0
MD5 : efcc21831ec9e60aceb7e01ace62bfd3
https://www.dropbox.com/s/8v27l9kvexz4a6g/3.32.531.2_Firmware_TMUS.zip?dl=0
MD5 : fdc1699a3ec2846ee289e04e725686c4
https://www.dropbox.com/s/k4iv4abweirp7m0/3.28.401.7-Firmware-noredtext.zip?dl=0
MD5 : 6739525b46b1fdbf81261f76d84ac77c
https://www.dropbox.com/s/uhyo2d3ilw3hkei/3.28.401.6-Firmware-noredtext.zip?dl=0
MD5 : 2376ff41caedd5d51163bbe793a00e7c
https://www.dropbox.com/s/zkh3bwpo25nshmi/unsigned_firmware_3.28.401.3.zip?dl=0
MD5 : 33a5479e5d9e75810b62238274fd60ef
https://www.dropbox.com/s/8npujxrp24di56e/m8_vzw_443_firmware.zip?dl=0
MD5 : 76efa8fa88972f8b7fa7d95fa1735a20
https://www.dropbox.com/s/2nfda6aev1mixsn/fw_2.22.401.5_no_red_text.zip?dl=0
MD5 : 6ebdf156a2b387bb48d0544b8d7eb703
https://www.dropbox.com/s/vo2pwqlxo6z8wi5/2.22.401.4-Firmware.zip
MD5 : e775ad81006fdc560673e9c03b5aba21
https://www.dropbox.com/s/5unpkc2bk77s90u/2.22.401.4-Firmware-noredtext.zip
MD5 : 5c742201c984139174646dea790de936
https://www.dropbox.com/s/no9bwr72lkab8ty/fw_2.22.531.5_T-MO_w_TWRP_2710.zip?dl=0
MD5 : 3a5b1005cb51a2b7a3337562f656c6b2
https://www.dropbox.com/s/7au5df1pugxu2ss/2.22.1540.3_ATT_no_red_text.zip
MD5 : 4d83ed7ec9cb896ec554a9b172f22d50
https://www.dropbox.com/s/t6y8o9l67zcy1vp/firmware_2.12.401.3.zip
MD5 : e5a1258599751de15498fea148547736
https://www.dropbox.com/s/28o9cout0e9k80k/1.54.401.10-Firmware.zip
MD5 : 2977845d58457f7ec4c6edbf3f9e7307
https://www.dropbox.com/s/49t74ldxnwpej6j/1.54.401.10-Firmware-noredtext.zip
MD5 : d7871da0581c2de125d1a60b757f7084
Instructions:
1. Download firmware of choice in above links
2. Rename firmware to 0P6BIMG.zip (the first character is a zero, NOT A LETTER O)
3. Put renamed firmware.zip on your external_SD
4. Boot into your bootloader and make sure your in hboot and let it update its firmware.
5. No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed firmware file to external_sd
6. After you have updated your firmware, make sure to remove the 0P6BIMG.zip from your external_sd because it will ask to update your firmware everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing firmware again).
7.Profit!
SUPERCID
Changing your cid to supercid (11111111) will let you flash firmware without ever having to worry about changing your cid (ex: CWS__001) in the android-info.txt. When the bootloader goes to flash firmware it checks for 2 values that are device specific. 1. Is your mid (model id) 2. Is your cid (carrier id) This process completely eliminates the need for your stock cid when flashing packages in "RUU" mode. So basically supercid just makes flashing firmware packages 1 step easier.
S-OFF ONLY! How to get supercid
1. Have adb and fastboot set up. There are guides all over xda and google
2. Connect phone to PC and open terminal
3. Type "adb devices" to make sure phone is connected to PC
4. Type "adb reboot bootloader"
5. Once in fastboot type "fastboot devices" to make sure fastboot sees your device
6. Type "fastboot oem rebootRUU"
7. Once in black screen that says HTC you are in ruu mode
8. Type "fastboot oem writecid 11111111" (has to be 8 one's)
9. After a successful cid overwrite type "fastboot reboot-bootloader"
10. Profit! You are now supercid!!
Additional Information...
I have also been testing different formats of the external_sd and vfat, fat, and fat32 work for updating the firmware. I formatted numerous different sdcards to ext4 and the hboot just bypasses the image as if there was no firmware.zip on the card.
Thanks to @skulldreamz, the original author of this thread for introducing me to an easy and safe method for flashing firmware without a PC
Thanks to @Sneakyghost for all the knowledge about firmware and firmware flashing, and for always being willing to answer any questions I may have.
Thanks to @graffixnyc for providing the GPE ruu and the GPE back to sense firmware.zip
Thanks to @SoLdieR9312 for firmware links
Thanks to @LlabTooFeR for always being first on the scene with HTC firmware updates
Thanks to @starbase64 for the modded hboot.
Thanks to @migascalp for fixed os version twrp recovery
I plan on adding other variants and info as I get time. Thanks
Reserved.
Reserved...
Sent from my LG-D800 using XDA Premium 4 mobile app
This reminds me of the HTC desire days when I didnt have a clue about fastboot commands lol!!! great find mate!!!:good:
I can't remember so far back exactly but so u need to be s off to achieve this?
This was how I used to flash different types of HBOOT on the HTC desire when it was s off
exocetdj said:
This reminds me of the HTC desire days when I didnt have a clue about fastboot commands lol!!! great find mate!!!:good:
I can't remember so far back exactly but so u need to be s off to achieve this?
This was how I used to flash different types of HBOOT on the HTC desire when it was s off
Click to expand...
Click to collapse
Actually no you don't need to be s-off to use this method to upgrade your firmware and or hboot. Its basically a forgotten secret on the safest way in my honest opinion to upgrade firmware because you don't have to worry about your computer shutting off or a USB cable coming out accidentally and bricking your device. Now to downgrade hboots you would need to be s-off but this is just the easiest and safest way to take a ota update without any worrying involved. If I'm incorrect on anything, anyone please feel free to jump in and correct me as I'm still somewhat new to this. Only thing I can think of is if your s-on and try to downgrade hboot, then you would just get a wrong image error but that's it. It won't flash with any unexpected consequences.
Sent from my LG-D800 using XDA Premium 4 mobile app
Anyone know what version of firmware the unlocked or dev editions are currently running?
Sent from my HTC One_M8 using Tapatalk
does it also work with any other firmweware.zip for the M8?
did we just rename the firmeware.zip to 0P6BIMG.zip?
that sounds very easy...to easy in my opinion
You will need S-OFF if you're trying to flash a FW package and your CID doesn't match those that the FW package is originally intended for
Benski_84 said:
does it also work with any other firmweware.zip for the M8?
did we just rename the firmeware.zip to 0P6BIMG.zip?
that sounds very easy...to easy in my opinion
Click to expand...
Click to collapse
for GSM it should, I was renaming the zips i used to flash this way on the HTC desire to the same thing each time i flashed and it worked. The phone needs it named the same to recognise what to flash when in HBOOT
Benski_84 said:
does it also work with any other firmweware.zip for the M8?
did we just rename the firmeware.zip to 0P6BIMG.zip?
that sounds very easy...to easy in my opinion
Click to expand...
Click to collapse
Yes it will work for any other firmware zip that has been made for our m8. Again I only have a gsm, so can only speak on that %100. It does sound easy, too easy and that's why I would recommend this procedure over any other that yeilds the same outcome. One other piece of knowledge I need to add to op is that I would use supercid as it has never failed me...
Sent from my LG-D800 using XDA Premium 4 mobile app
skulldreamz said:
Yes it will work for any other firmware zip that has been made for our m8. Again I only have a gsm, so can only speak on that %100. It does sound easy, too easy and that's why I would recommend this procedure over any other that yeilds the same outcome. One other piece of knowledge I need to add to op is that I would use supercid as it has never failed me...
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks mate. got a GSM Device, too. sure, and i got also S-Off and SuperCID
will give it a try, asap
skulldreamz said:
Actually no you don't need to be s-off to use this method to upgrade your firmware and or hboot.
Click to expand...
Click to collapse
Only correction I would make to this statement is that firmware zips must be signed if you are not s-off. Customs zips cannot be flashed on s-on devices regardless of how you flash them. If the zip is signed then it can be freely flashed as mentioned above. Just keep in mind that there will be no downgrading firmware without s-off.
On a side note, it's good to see you here in the m8 forums, bro! [emoji106]
Thank you for that, very useful because my pc is dead now... One question though, the recovery file is missing inside the zip, have you put it out already? Or there wasn't one in this firmware package?
Envoyé de mon HTC One_M8 en utilisant Tapatalk
francki said:
Thank you for that, very useful because my pc is dead now... One question though, the recovery file is missing inside the zip, have you put it out already? Or there wasn't one in this firmware package?
Envoyé de mon HTC One_M8 en utilisant Tapatalk
Click to expand...
Click to collapse
Your welcome.. No i did not remove a recovery.img or alter the firmware package at all. If you unzip the package which I provided you will see exactly what was meant to be in the 2.12.401.3 firmware 4.4.3 update.
Sent from my One M8 using XDA Premium 4 mobile app
I'm a bit surprised, that this way seems to be unknown for the most people.
I always flash my firmware that way, since i have HTC phones.
For other devices than GSM, take a look at the bootloader. Right after you are in, it is scanning for the (firmware-)files and you can see, what filename it is scanning for. So you can rename the firmware with the correct name.
Here is a picture, i made with my previous HTC One SV, that you see what i mean:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As stated, this pic is not from M8 and the name in the picture don't work for M8!
Does it have to be external sd?
Darknites said:
Does it have to be external sd?
Click to expand...
Click to collapse
As far as i know, yes!
old.splatterhand said:
As far as i know, yes!
Click to expand...
Click to collapse
Dam it, oh well was getting one anyway lol.
If you have one lying around not being used and it's at least 4gb I would venture it would work. If the file is less than 2gb you could probably try a 2gb card.
sent from my HTC One M8 using hofo mobile app
It's nice to see this still works, this is how we flashed stuff to HTC Windows mobile phones back before Android. Idk if it will work for exfat cards though, I haven't used this since fat32 mini sd cards instead of micro.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Related
PLEASE NOTE: THIS THREAD IS NO LONGER MAINTAINED OR UPDATED BY IT'S OP. Reason? Vivid power button broke and charger port completely non-functional. I've abandoned this forum awhile ago actually, just posting this to let newcomers ( didn't know there were still new peeps ) know it's not being updated anymore. Doesn't mean you can't use the collection of RUU's and IMG files below as they still work.
STOCK ROM COLLECTION
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LINKS WORKING AS OF 4/8/13
---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------
PH39IMG.ZIP'S
Rogers
Bell WRONG FILE DO NOT DOWNLOAD
AT&T WRONG FILE DO NOT DOWNLOAD ( Uploaded wrong file ) duh...
Telestra WRONG FILE DO NOT DOWNLOAD ( Uploaded wrong file ) duh...
Telecom/SKT WRONG FILE DO NOT DOWNLOAD ( Uploaded wrong file ) duh...
Vodafone UPLOADING NOW
Make sure to rename them from PH39IMG-copy.zip to PH39IMG.zip
---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------
How to run PH39IMG.ZIP
1: Relock your bootloader using the fastboot oem lock code
2: Choose a PH39IMG.ZIP file that coresponds to the carrier you are on
3: Put the file on the phone's internal memory or microSD card. I've heard that putting the file on the phone's internal memory does not work so if that fails put it on a microSD card
4: Boot into bootloader and it will check for the file
5: It should automatically find the zip file and flash the stock image (this includes recovery, system, everything stock.)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RUU'S
Rogers
Bell
AT&T
Telstra
Telecom/SKT
Vodafone Gingerbread RUU
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
How to run the RUU
1: Make sure your bootloader is re-locked and by using the fastboot oem lock code
2: Plug in your device and make sure you have the drivers installed ( or HTC Sync )
3: Run the RUU specific to your carrier and wait for it to load ( could take up to 20 min depending on your PC )
4: A box should popup on your screen and a progress bar will be shown ( wait )
5: Once it's done loading follow the steps to return to stock.
6: You are now unrooted
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
RUU Error explanation list
ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure
you properly connect the device to the PC through ActiveSync before running RUU.
ERROR [206] : MEMORY ALLOCATION
ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
ERROR [212] : FILE CREATE
ERROR [214] : FILE WRITE
ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery
when it is upgrading the radio).
ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again. Check that the contents of the folder is a KaiserCustomRUU.exe file and an RUUSigned.nbh file. If you put the os-new.nb file in by mistake instead of the .nbh, this is the error that shows up. Thanks ConfusedSTU.
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
ERROR [260] : UPDATE ERROR
This error occurs when there is an "open port error" before upgrading the CE ROM image. Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again.
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
* THIS WILL WIPE ALL DATA *
* CHARGE YOUR DEVICE TO 100% TO ENSURE SAFE FLASH *
* INTERUPTING THE RUU/PH39IMG PROCESS WILL RESULT IN A BRICK *
*DISCLAIMER*
EVEN THOUGH THESE ARE THE STOCK RUU'S AND PH39IMG.ZIP FILES PROVIDED BY HTC I CANNOT GUARANTEE THAT THIS WILL GO FLAWLESSLY OR THAT YOUR PHONE WILL NOT COMBUST AND BURY ITSELF DEEP INTO THE EARTH'S CORE. WHILE IT IS VERY UNLIKELY THAT SOMETHING WILL GO WRONG YOU ARE USING THIS AT YOUR OWN RISK AND I WILL NOT BE HELD RESPONSIBLE IF YOUR PHONE IS DESTROYED DURING THIS PROCESS.
Thanks XxSHaDoWxSLaYeRxX for providing me with links to the SKT, Vodafone and Telestra RUU'S
camo_flage said:
Here are the PH39IMG.zip files pulled striaght from the RUU'S:victory:
Rogers http://depositfiles.com/files/3nx2rq0qe
AT&T http://depositfiles.com/files/pgt50l36g
Be sure to rename them from PH39IMG-copy.zip to PH39IMG.zip
Alot of people have been requesting them so here they are!
Click to expand...
Click to collapse
Are these the originals or after ICS update?
These are the stock ICS PH39IMG.ZIP files
camo_flage said:
Here are the PH39IMG.zip files pulled striaght from the RUU'S:victory:
Rogers http://depositfiles.com/files/3nx2rq0qe
AT&T http://depositfiles.com/files/pgt50l36g
Be sure to rename them from PH39IMG-copy.zip to PH39IMG.zip
Alot of people have been requesting them so here they are!
Click to expand...
Click to collapse
you cant flash them after you root though
XxSHaDoWxSLaYeRxX said:
you cant flash them after you root though
Click to expand...
Click to collapse
Yes you can. but you have to flash stock recovery and relock your bootloader first
camo_flage said:
Yes you can. but you have to flash stock recovery and relock your bootloader first
Click to expand...
Click to collapse
yes, which means you have just unrooted your phone. so you cant flash while rooted
Exactly, the reason I put this up is incase anybody wanted to return to stock ICS and accept the new update that's currently on AT&T and Telstra
Sent from my HTC Raider on the Rogers Wireless Network
camo_flage said:
Exactly, the reason I put this up is incase anybody wanted to return to stock ICS and accept the new update that's currently on AT&T and Telstra
Sent from my HTC Raider on the Rogers Wireless Network
Click to expand...
Click to collapse
i just confused myself lol. anyway, when was the update released? if its the october one, its not really work it it just fixes bugs or something, not sure
XxSHaDoWxSLaYeRxX said:
i just confused myself lol. anyway, when was the update released? if its the october one, its not really work it it just fixes bugs or something, not sure
Click to expand...
Click to collapse
It's the STOCK ICS that came back in march, for AT&T and in july for Rogers, update not the october bugfix or whatever the heck that was.
So is the idea of these files so that you could apply a standard OTA update by reverting back to stock?
Is the process to move this file to your root folder of the SD card renaming like you mentioning and opening the Power + VOL DOWN menu?
Is there anything else unnecessary to getting back to unrooted and then is it just as easy to root and unlock after the update?
maxpower2078 said:
So is the idea of these files so that you could apply a standard OTA update by reverting back to stock?
Is the process to move this file to your root folder of the SD card renaming like you mentioning and opening the Power + VOL DOWN menu?
Is there anything else unnecessary to getting back to unrooted and then is it just as easy to root and unlock after the update?
Click to expand...
Click to collapse
http://theunlockr.com/2012/10/22/how-to-unroot-the-htc-vivid/
Full details here and yes once you unroot you can ota
Re: Links PH39IMG.zip Files
I think a more efficient way would be to just use the ruu.
Sent from my Vivid 4G using Tapatalk 2
Sorry for my question: is this the stock rom ICS sense 3.6 fo Htc Vidvid AT&T and after flash it number software will be 3.26.502.56 71RD?
Re: Links PH39IMG.zip Files
Yes this is the official stock ics
Sent from my PACMAN HTC Raider on the Rogers Wireless Network
camo_flage said:
Here are the PH39IMG.zip files pulled striaght from the RUU'S:victory:
Rogers http://depositfiles.com/files/3nx2rq0qe
AT&T http://depositfiles.com/files/pgt50l36g
Bell will add soon
*EDIT* Can't find the bell one....
Be sure to rename them from PH39IMG-copy.zip to PH39IMG.zip
Alot of people have been requesting them so here they are!
Click to expand...
Click to collapse
I try to un-root my vivid ( model: HTC PH39100; device: Holiday; brand: cingular_us) by using your PH39IMG.zip ( first relock bootloader and then h-boot automatically seaching PH39IMG.zip) but it said : your main version is old and update fail. how can i do to un-root ? and what my wrongs? thanks for your helps :crying::laugh:
and version of ruu is 3.41.708.1
Re: Links PH39IMG.zip Files
Are you on GB or ICS and make sure the ruu number matches your baseband version
Sent from my Cyan HTC Raider on the Rogers Wireless Network
camo_flage said:
Are you on GB or ICS and make sure the ruu number matches your baseband version
Sent from my Cyan HTC Raider on the Rogers Wireless Network
Click to expand...
Click to collapse
run CMD "fastboot getvar version-main" : 3.41.708.1 I'm on ICS with the custom rom.:crying:
How can I do ? please help
Re: Links PH39IMG.zip Files
That's the problem you have to be on stock not a custom Rom to run an ruu
Sent from my Cyan HTC Raider on the Rogers Wireless Network
I see, but I can not come back stock Rom because the current version is 3.41.708.1. I run last ruu of htc (at&t) - 3.26.502.56R23, the results also are "update fail" because "main version is older". what are going on with my phone ?
Re: Links PH39IMG.zip Files
I'm not sure I understand you are you trying to downgrade?
Sent from my Cyan HTC Raider on the Rogers Wireless Network
If you are still S-On (or S-off but lazy or tentative) and want a simple way to return to the stock ROM and also be able flash back the stock radio and recovery then this may be for you.
XDA member migascalp gave me the idea of packaging stock ROM's with the aroma installer and include the ability to flash the stock recovery also as sort of a poor mans RUU since so many still are S-on and cannot properly run a RUU.
I have been making these for a few different versions for the GSM model M7 UL:
See here: http://www.htc1guru.com/downloads/stock-rom-downloads/
I got a request to do one for the Sprint Variant, so here it is. To be clear, I personally do not own the Sprint version, so I couldn't test this, however it is a fairly basic script and I only changed the partition info for formatting and copying the data. Thanks to XDA member @(^_^)@ for the partition layout.
If you are looking to run the stock ROM but rooted (You can add root during my installer) or modded then you will probably want one of these:
http://forum.xda-developers.com/showthread.php?t=2368907
Thanks to Indirect for the firmware and stock rom dumps.
Thanks to the.emilio for Radio information.
You simply flash in recovery like installing any other rom.
Here are the screen shots of the Aroma Installer. Sorry for some the bad edits, its really hard to get a good pic taken manually at bootloader or recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
It seems like the Radio flashing was a problem, so I have removed it from the package. It will not show up as an option during the installer.
ROM and Recovery flash fine.
I have updated the download link and md5
Thanks
Here is the download link:
Guru Reset M7 Sprint 1.31.651.2
md5: f3d055dea52b60674833c2cbb87893fb
Guru Reset M7 Sprint 1.29.651.10
md5: 29a4b3cd30a848a8e6c9e1e7bd079740
Guru Reset M7 Sprint 3.04.651.2
md5: 0cc1048c835512e1d988525ea8aa2815
........Credits........Thanks to Indirect for the 1.31.651.2 Stock ROM
Thanks to O.M.J. for the 3.04.651.2 Stock ROM
Enjoy!
Stuck on the "Installing Stock Rom" screen. Won't flash anything, just stays at 0.00%. Just stuck on that screen... I'm HTC Dev-unlocked only, on stock 1.31
Edit: Tried it again, this time with just the recovery, no radio, and it worked fine :good: Still waiting for it to reboot but it looks good.
rubyknight said:
Stuck on the "Installing Stock Rom" screen. Won't flash anything, just stays at 0.00%. Just stuck on that screen... I'm HTC Dev-unlocked only, on stock 1.31
Edit: Tried it again, this time with just the recovery, no radio, and it worked fine :good: Still waiting for it to reboot but it looks good.
Click to expand...
Click to collapse
OK, I know in TWRP when finished you have select to reboot, I didn't insert that into the script.
Odd that it is the Radio that has the issue. I will pull the package for now and update it so there is no choice for Radio install only recovery.
Thanks
Uploading new version without the option to flash the radio.
I think most are just concerned with ROM and Recovery anyway.
I will update OP when new link is live.
New version with no option to flash radio is now live.
OP Updated.
Thanks
crushalot said:
New version with no option to flash radio is now live.
OP Updated.
Thanks
Click to expand...
Click to collapse
And as the post says, it will return me to 100% OEM Stock ROM and recovery without needing S-OFF first?
GeekasaurusWrex said:
And as the post says, it will return me to 100% OEM Stock ROM and recovery without needing S-OFF first?
Click to expand...
Click to collapse
That is correct.
Well technically 99% as the stock radio was pulled from the package and can't be installed with the rom and recovery. The radio version shouldn't matter but you can always manually flash the correct radio before running this installer.
This demo is of AT&T Stock ROM and then OTA but the install and procedure is the same. I can't update this video for the roms in the this thread because I don't have a Sprint phone.
crushalot said:
That is correct.
Well technically 99% as the stock radio was pulled from the package and can't be installed with the rom and recovery. The radio version shouldn't matter but you can always manually flash the correct radio before running this installer.
Click to expand...
Click to collapse
Well, I can say that this has worked for me. I flashed the radios, did the reset and back on all stock everything. The only issues are that Qualcomm's Enhanced Location stops working, and my phone randomly rebooted once but that may have been coincidental. I just v wished I had saved the firmware update to dropbox so I wouldn't have to download it again.
My issue was I am s-on and running a 4.3 Rom. There was no way to get the entire firmware package (PRI, firmware, radio's, etc) without being s-off. I noticed revone AND moonshine wouldn't work on the new 1.55hboot so I used this download and flashed it then manually did the OTA update to 4.3. Yes I lost root, yes my Qualcomm would not work, however, I got the FULL firmware update. I then just re-rooted and flashed OMJs deodexed and life is all good. Thank you for making this, it helped me a ton. Now I just gotta wait for an s-off method on hboot 1.55.
Sent from my HTCONE using xda app-developers app
if you have at any point upgrade to 4.3 from 4.1 using a rooted rom, back up your 0 folder or this process will wipe it out completely.
GeekasaurusWrex said:
Well, I can say that this has worked for me. I flashed the radios, did the reset and back on all stock everything. The only issues are that Qualcomm's Enhanced Location stops working, and my phone randomly rebooted once but that may have been coincidental. I just v wished I had saved the firmware update to dropbox so I wouldn't have to download it again.
Click to expand...
Click to collapse
Looks like that is known issue on stock roms:
http://forum.xda-developers.com/showthread.php?t=2467607
I2izzo said:
My issue was I am s-on and running a 4.3 Rom. There was no way to get the entire firmware package (PRI, firmware, radio's, etc) without being s-off. I noticed revone AND moonshine wouldn't work on the new 1.55hboot so I used this download and flashed it then manually did the OTA update to 4.3. Yes I lost root, yes my Qualcomm would not work, however, I got the FULL firmware update. I then just re-rooted and flashed OMJs deodexed and life is all good. Thank you for making this, it helped me a ton. Now I just gotta wait for an s-off method on hboot 1.55.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Nice. That is good to know.
Thanks
itster2 said:
if you have at any point upgrade to 4.3 from 4.1 using a rooted rom, back up your 0 folder or this process will wipe it out completely.
Click to expand...
Click to collapse
Thanks. Good thing to know. I will update the OP.
itster2 said:
if you have at any point upgrade to 4.3 from 4.1 using a rooted rom, back up your 0 folder or this process will wipe it out completely.
Click to expand...
Click to collapse
Doesn't 0 live in the media folder? I checked the wipe script and it should leave everything in /data/media alone and I thought that would include the 0 folder.
New Version Posted
I created a package with the slightly older version. May be useful for those that have older firmware and no touchscreen on 1.31.651.2.
OP has been updated.
Guru Reset M7 Sprint 1.29.651.10
md5: 29a4b3cd30a848a8e6c9e1e7bd079740
Just to be clear, I can flash this to get back to bone-stock. Then I can do the OTA to get the new 4.3 firmware?
I am currently running Team Nocturnal's GPE(4.2.2) and S-On with ClockworkMod Recovery. Thanks guys.
jharre08 said:
Just to be clear, I can flash this to get back to bone-stock. Then I can do the OTA to get the new 4.3 firmware?
I am currently running Team Nocturnal's GPE(4.2.2) and S-On with ClockworkMod Recovery. Thanks guys.
Click to expand...
Click to collapse
Yes, As long as your current firmware version matches the version of the stock rom reset.
Ok great! Forgive my ignorance on this, but how do I confirm this? I see I have a Baseband of 1.00.20.0626...
jharre08 said:
Ok great! Forgive my ignorance on this, but how do I confirm this? I see I have a Baseband of 1.00.20.0626...
Click to expand...
Click to collapse
That is the radio version. To check your firmware, boot to your bootloader screen (Hold power and Vol Down) and the firmware version should show for the line OS.
I have been looking around but i can't find my RUU.
I want to return my phone back to stock, since i can't update my phone while rooted.
Also my experience with this is seriously 0 (buddy of mine rooted this), so i'm sorry if i might sound stupid.
I have downloaded all the Ruu files from the return back to stock forum here and non of them worked.
My software number is: 1.29.111.11
Thanks in advance
Whose the carrier?
caster62003 said:
Whose the carrier?
Click to expand...
Click to collapse
T-mobile
Alright, now that I have a clear mind and actually read your question completely...
When you tried the previous RUUs before, did they fail during flash or did Android not function correctly when you got in?
If the RUU flash failed, you more than likely still have an unlocked bootloader, which was required during the root process and the RUU does not like, so it fails.
Considering your knowledge on Android/HTC One, I'm going to point you here, download the Toolkit, extract it to somewhere... Note: I am not affiliated with the development of the Toolkit, I have used it before and IMO it is a great program, very HTC One noob friendly.
On your phone make sure USB Debugging is enabled, then, launch the Toolkit -> On the left hand side, under Basic ADB, click Bootloader. Your phone will turn off, then get into the Bootloader.
At the top, it should say Unlocked, if it does, you need to relock the bootloader, now on the right hand side of the Toolkit, check the checkbox under Agreement which will then enable the Re-lock button, click that (DO NOT CLICK S-On), Your phone will reboot to Android, Once back, click the Bootloader button again Under Basic ADB. This time instead of Unlocked, it will say Relocked. Now try running the RUU again, this time it should work.
Once the RUU flash is done, you should be all set to get going again.
caster62003 said:
Alright, now that I have a clear mind and actually read your question completely...
When you tried the previous RUUs before, did they fail during flash or did Android not function correctly when you got in?
If the RUU flash failed, you more than likely still have an unlocked bootloader, which was required during the root process and the RUU does not like, so it fails.
Considering your knowledge on Android/HTC One, I'm going to point you here, download the Toolkit, extract it to somewhere... Note: I am not affiliated with the development of the Toolkit, I have used it before and IMO it is a great program, very HTC One noob friendly.
On your phone make sure USB Debugging is enabled, then, launch the Toolkit -> On the left hand side, under Basic ADB, click Bootloader. Your phone will turn off, then get into the Bootloader.
At the top, it should say Unlocked, if it does, you need to relock the bootloader, now on the right hand side of the Toolkit, check the checkbox under Agreement which will then enable the Re-lock button, click that (DO NOT CLICK S-On), Your phone will reboot to Android, Once back, click the Bootloader button again Under Basic ADB. This time instead of Unlocked, it will say Relocked. Now try running the RUU again, this time it should work.
Once the RUU flash is done, you should be all set to get going again.
Click to expand...
Click to collapse
Sorry for answering a bit late, but i had exams. Anyway i found some instructions here and i've followed the instructions but i've been stuck at step 10
for the last hour it's been looking like this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what is it that i'm doing wrong here?
Edit: i kept retrying the steps and i got a bit further, but now after i type fastboot flash zip firmware.zip i get this fail
TM-87 said:
Sorry for answering a bit late, but i had exams. Anyway i found some instructions here and i've followed the instructions but i've been stuck at step 10
for the last hour it's been looking like this...
what is it that i'm doing wrong here?
Edit: i kept retrying the steps and i got a bit further, but now after i type fastboot flash zip firmware.zip i get this fail
Click to expand...
Click to collapse
that's normal you have to issue "fastboot flash zip firmware.zip" twice!
so now IMMEDIATELY do it again, DO NOT REBOOT
the second flash should come back with success
nkk71 said:
that's normal you have to issue "fastboot flash zip firmware.zip" twice!
so now IMMEDIATELY do it again, DO NOT REBOOT
the second flash should come back with success
Click to expand...
Click to collapse
Ok i've tried doing fastboot flash zip firmware.zip again, but now i get this message
I have retried making this file again by redownloading everything, but i keep getting this unkown error...
TM-87 said:
Ok i've tried doing fastboot flash zip firmware.zip again, but now i get this message
I have retried making this file again by redownloading everything, but i keep getting this unkown error...
Click to expand...
Click to collapse
"cannot load" just means the filename (ie "firmware.zip") is wrong. check your folder for the correct name.
nkk71 said:
"cannot load" just means the filename (ie "firmware.zip") is wrong. check your folder for the correct name.
Click to expand...
Click to collapse
Thanks that worked, i've run the fastboot flash zip firmware.zip twice now and it worked both times. atleast that's what it said, when i rebooted the phone i still had superSU isn't that stuff supposed to be gone?
TM-87 said:
Thanks that worked, i've run the fastboot flash zip firmware.zip twice now and it worked both times. atleast that's what it said, when i rebooted the phone i still had superSU isn't that stuff supposed to be gone?
Click to expand...
Click to collapse
Nope, superSU should still be there. You only upgraded firmware, nothing to do with ROM or SU.
Sent from my HTC One using Tapatalk
nkk71 said:
Nope, superSU should still be there. You only upgraded firmware, nothing to do with ROM or SU.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
.... So then ... how do i unroot / return to stock i followed instructions on youtube and they said i needed the RUU file so that's when i stumbled onto this problem and now that i've found the solution ... i still have no idea how to get rid of the twrp and superSU off my phone ....
I just want to return the phone back to how i bought it, since after the rooting thing i couldn't update since it would just return to twrp when trying to instal the update....
TM-87 said:
.... So then ... how do i unroot / return to stock i followed instructions on youtube and they said i needed the RUU file so that's when i stumbled onto this problem and now that i've found the solution ... i still have no idea how to get rid of the twrp and superSU off my phone ....
I just want to return the phone back to how i bought it, since after the rooting thing i couldn't update since it would just return to twrp when trying to instal the update....
Click to expand...
Click to collapse
It's not the root preventing the update from what I can tell. What you need is to flash stock recovery over twrp
Sent from my HTC One
gusto5 said:
It's not the root preventing the update from what I can tell. What you need is to flash stock recovery over twrp
Sent from my HTC One
Click to expand...
Click to collapse
So i need to put this RUU.zip onto my phone and flash it via twrp?
TM-87 said:
So i need to put this RUU.zip onto my phone and flash it via twrp?
Click to expand...
Click to collapse
Sorry mate, kind a lost track of what you want to achieve. Can you please explain.
Also post a "fastboot getvar all" (remove IMEI and s/n before posting)
nkk71 said:
Sorry mate, kind a lost track of what you want to achieve. Can you please explain.
Also post a "fastboot getvar all" (remove IMEI and s/n before posting)
Click to expand...
Click to collapse
Again sorry for the late reply, still busy with my exams. Anyway, what i want to do is return the phone back like before i rooted the phone/ remove twrp, superSu and all that. Right now i can't update my phone and i'm still on JB 4.1. Each time i try to download and instal the update it keeps going to twrp.
Here's my "fastboot getvar all"
Bump
no one knows a solution?
TM-87 said:
no one knows a solution?
Click to expand...
Click to collapse
You probably need to get S-Off, if you want to go back to 100% stock. whats the date of your bootloader?
nkk71 said:
You probably need to get S-Off, if you want to go back to 100% stock. whats the date of your bootloader?
Click to expand...
Click to collapse
Where does it show the date of the bootloader?
TM-87 said:
Where does it show the date of the bootloader?
Click to expand...
Click to collapse
in bootloader , the attached screen, we need to see if you are patched 1.44 hboot or unpatched; unpatched will be dated before June 2013
Firmware:
4.06.651.9 Full Firmware - for S-ON users (fastboot flashable): You will have to re-lock your bootloader to flash the firmware if you are S-ON
4.06.651.9 Modified Firmware - for S-OFF users w/ hboot, boot.img, recovery ... removed (fastboot flashable): No need to re-lock
Instructions for flashing the firmware:
rename firmware to firmware.zip
copy firmware.zip to your sdk>platform-tools folder
boot into bootloader
plug in usb
select fastboot option (screen should say fastboot usb)
type Fastboot oem rebootRUU
when you see the black screen w/ HTC, type Fastboot flash zip firmware.zip
when it's done, type Fastboot reboot
Thanks @thoughtlesskyle
Thanks @tws101 for this
To Remove the Update Notification on the Modified Firmware if you are receiving them, you will need to update your \system\build.prop
1. Use an android file browser (with root access) and browse to \system\
2. Copy the build.prop file to your sd-card
3. Extract to your PC
4. Open with an editor like Notepad+
5. Find and replace "4.06.651.4" with "4.06.651.9"
6. On your phone rename the original file to build.prop.bak
7. Import the new file to your phone \system\
8. Correct file permissions rw-r-r
9. Reboot the phone
Now you will no longer receive update notifications. This step is only necessary if you used the modified firmware to update a stock rooted 4.06.651.4
Let Eddie know
Sent from my GT-N5110 using Tapatalk
FrozenRiff said:
Let Eddie know
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
BD619 said:
4.06.651.9 OTA.zip
DO NOT FLASH THIS IT'S FOR THE DEVS TO USE IF THEY WANT TO UPDATE THEIR ROMS!!!!
Click to expand...
Click to collapse
Does this come with a new radio?
tommy24 said:
Does this come with a new radio?
Click to expand...
Click to collapse
Nope
Can anybody post a system dump?
Sent from my HTC One using Tapatalk
thx BD!
So I need flash the OTA zip right???? ? thanks bro you da man!
Sent from my HTCONE using XDA Premium 4 mobile app
Hmm... Flashed it but the only thing that wrote is rcdata.
Please check the full firmware, did md5 on download, cant see content of zip, Windows error. However I can on modified. Have not flashed yet.
Sent from my HTC One on some Awesome Rom..
thanks BD
avwheeler said:
Please check the full firmware, did md5 on download, cant see content of zip, Windows error. However I can on modified. Have not flashed yet.
Sent from my HTC One on some Awesome Rom..
Click to expand...
Click to collapse
I had to use 7zip to open the OTA.zip to pull the Full Firmware,I also used 7zip to open the Full Firmware zip
Here is the MD5 I got 486824b08d2a928df44df0ea281a01a4
numus said:
Hmm... Flashed it but the only thing that wrote is rcdata.
Click to expand...
Click to collapse
There is not much in there, I flashed the modified firmware and the command line was only 5-6 lines long.
BD619 said:
There is not much in there, I flashed the modified firmware and the command line was only 5-6 lines long.
Click to expand...
Click to collapse
same here.
BD619 said:
There is not much in there, I flashed the modified firmware and the command line was only 5-6 lines long.
Click to expand...
Click to collapse
LOL -- there really *isn't* much in there -- it's just a few parts of a full set.
If folks want 'it all' as it were, flash 4.06.651.4_modified_firmware_RUU.zip first, then modified_firmware_4.06.651.9.zip -- that should do it.
(teaser -- just for fun -- *really* edged-out version of TWRP coming soon, just a teeny selinux thing to work out first -- lol).
How can I flash this with twrp recovery. My pc broke I need to be able to update with just my phone. Thanks in advance.
Sent from my HTCONE using Tapatalk
Wrong section, should be in Dev
Sent from my HTCONE using Tapatalk
BD619 said:
There is not much in there, I flashed the modified firmware and the command line was only 5-6 lines long.
Click to expand...
Click to collapse
You have more than just rcdata in the zip... It should attempt to write all the images stored in the zip, not just 1... In the about section it still says it is .4 not .9 like it should.
numus said:
You have more than just rcdata in the zip... It should attempt to write all the images stored in the zip, not just 1... In the about section it still says it is .4 not .9 like it should.
Click to expand...
Click to collapse
In the About section it's based on the rom you are running if it's a .4 rom it will say .4 if any of the devs decide to update to .9 it will say .9
i did a getvar after flashing modified firmware and it is .9 for sure
After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc
4/ Flash radio
5/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
6/ download any Sprint carrier supported rom like Viper, Leedroid, etc
7/ TWRP
8/ Choose carrier as Sprint inside Aroma, flash it
9/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
Ryan Long said:
After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download firmware update that match your RUU carrier for most compatible here http://forum.xda-developers.com/show....php?t=3387520
4/ Open your firmware update zip file, delete radio.img, save it.
5/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc then import it to your firmware update zip file.
6/ Flash the RUU
7/ Flash the modified firmware update zip file.
8/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
9/ download any Sprint carrier supported rom like Viper, Leedroid, etc
10/ TWRP
11/ Choose carrier as Sprint inside Aroma, flash it
12/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
Click to expand...
Click to collapse
Hi, friend, did you try this method? it works? Can I convert my htc 10 2ps64 to a 2PS65 without any errors in the applications?
Thank you
fello781 said:
Hi, friend, did you try this method? it works? Can I convert my htc 10 2ps64 to a 2PS65 without any errors in the applications?
Thank you
Click to expand...
Click to collapse
Of course at least everything works like a charm in my phone because I'm using cook rom Sprint carrier.
I still don't know what happen to your phone. In theory, you can convert to 2PS65 by this method. Change your RUU, your MID but I can't confirm there won't be any error because I haven't test in any original RUU. I only can confirm this method won't brick your phone and won't lock your imei then u can unlock your sim card manualy.
When I test with Ledroid, US Unlocked, applications still turned black so I'm back to Sprint carrier.
So sad but until now, I can't find any reason cause those troubles. Maybe because the different of hardware between 2PS64 & 2PS65. Too bad but so many people had trouble using Sprint phone outside original carrier.
Ryan Long said:
Of course at least everything works like a charm in my phone because I'm using cook rom Sprint carrier.
I still don't know what happen to your phone. In theory, you can convert to 2PS65 by this method. Change your RUU, your MID but I can't confirm there won't be any error because I haven't test in any original RUU. I only can confirm this method won't brick your phone and won't lock your imei then u can unlock your sim card manualy.
When I test with Ledroid, US Unlocked, applications still turned black so I'm back to Sprint carrier.
So sad but until now, I can't find any reason cause those troubles. Maybe because the different of hardware between 2PS64 & 2PS65. Too bad but so many people had trouble using Sprint phone outside original carrier.
Click to expand...
Click to collapse
Hello friend I need help I did the procedure as it is indicated in the tutorial but now the phone lost imei and signal, the radio is [email protected] and with no rom I get signal, I do not understand what happens already install several firmware and none get signal.
Please help every step after installing the modified firmware with the radio you said.
The strange thing is that if the firmware has a different radio I always see [email protected] as a radio.
I do not know what is happening
help plis
fello781 said:
Hello friend I need help I did the procedure as it is indicated in the tutorial but now the phone lost imei and signal, the radio is [email protected] and with no rom I get signal, I do not understand what happens already install several firmware and none get signal.
Please help every step after installing the modified firmware with the radio you said.
The strange thing is that if the firmware has a different radio I always see [email protected] as a radio.
I do not know what is happening
help plis
Click to expand...
Click to collapse
Have you flash the full RUU ? after U flash full RUU of other carrier, does your radio still [email protected] ?
U can back to original Sprint RUU and try again. U also can dump your own radio.img and put it into the firmware update.
lilares said:
Have you flash the full RUU ? after U flash full RUU of other carrier, does your radio still [email protected] ?
U can back to original Sprint RUU and try again. U also can dump your own radio.img and put it into the firmware update.
Click to expand...
Click to collapse
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens
fello781 said:
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens
Click to expand...
Click to collapse
that's strange. Have you try to flash radio once again using htc_fastboot ??
lilares said:
that's strange. Have you try to flash radio once again using htc_fastboot ??
Click to expand...
Click to collapse
My bad, hTC 10 can flash radio through bootloader. Please reboot into bootloader, flash radio using fastboot. You don't have to mod the firmware again.
fello781 said:
Hello friend if I have put the complete RUU and I keep the radio [email protected] but the signal is lost, the strange thing is that so put a firmware with another radio does not make changes.
I do not understand what happens
Click to expand...
Click to collapse
I'm just back to US Unlocked RUU and flash the radio. It would unlock my sim and Imei. Unfortunately, errors still occur for some app. I'm trying to disable some sensor to firure out cause of those problem
Ryan Long said:
My bad, hTC 10 can flash radio through bootloader. Please reboot into bootloader, flash radio using fastboot. You don't have to mod the firmware again.
Click to expand...
Click to collapse
I have tried many times to modify firmware by fasboot and nothing, also when installing a complete RUU of sprint with radio [email protected] I lose signal and the imei disappears
I'm lost I do not know what to do now I do not have a signal and the imei disappears, the radio I have is [email protected] because that shows in bootloader, and the rom is 2PS6IMG_1.80.651.20_RUU.zip.
Could you tell me from the beginning step by step what should I do to recover my htc 10 that now I can not have a signal do not recognize imei?
Which firmware should I install?
Which RUU?
soff
unlock
I appreciate help
fello781 said:
I have tried many times to modify firmware by fasboot and nothing, also when installing a complete RUU of sprint with radio [email protected] I lose signal and the imei disappears
I'm lost I do not know what to do now I do not have a signal and the imei disappears, the radio I have is [email protected] because that shows in bootloader, and the rom is 2PS6IMG_1.80.651.20_RUU.zip.
Click to expand...
Click to collapse
Download Sprint stock rom. Should be exe file. Flash it again. What it your MID now ? can U take some print screen ?
Ryan Long said:
Download Sprint stock rom. Should be exe file. Flash it again. What it your MID now ? can U take some print screen ?
Click to expand...
Click to collapse
cid 11111111 mid 2PS640000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
try to flash cook rom, sprint carrier, flash radio again, unlock sim card
Ryan Long said:
try to flash cook rom, sprint carrier, flash radio again, unlock sim card
Click to expand...
Click to collapse
Ok friend, I already have it, I have a new signal and thanks for the help.
No black screen solution in applications?
thanks for your help
Ryan Long said:
After figured out how to flash any firmware without change the radio, now I'm going further to flash any RUU into my Sprint hTC 10. Not really Debrand but still promising
Before we start, please read my old TUT for more experience: http://forum.xda-developers.com/sprint-htc-10/how-to/tut-flash-firmware-sprint-htc-one-t3458721
Now we start. As everyone already know, the only reason we can't flash any RUU because It'll lock your sim card and your imei and we all know the method to debrand any hTC one or ever other version of hTC 10. That's why I am going to do the same method.
1/ S-off, Change CID, MID (Super CID if you want)
2/ Download RUU that match your MID
3/ Download the Sprint radio here https://drive.google.com/open?id=0B3JWmvvPdlHZYUdGVUVraGZsZmc
4/ Flash radio
5/ Check Radio version. It must be [email protected]
Ok, now U can use your hTC 10 with working radio. For someone isn't using sprint simcard, Unlock the simcard using this following method:
6/ download any Sprint carrier supported rom like Viper, Leedroid, etc
7/ TWRP
8/ Choose carrier as Sprint inside Aroma, flash it
9/ Unlock sim card following this TUT http://forum.xda-developers.com/sprint-one-m9/general/nv-unlock-sim-t3314755
Click to expand...
Click to collapse
This actually saved my mobile network, long story short, I flashed an unlocked US, played with AOSP, then tried to restore my nandroid after RUU back to Sprint. Long and short left me without mobile network which freaked me out. I went 4 hours trying to fix this with flashing modems, wiping, RUU'ing, then I ended up doing exactly this (without first finding this post). So skip ahead to now, I find your post and then the post on Viper, so I did just that, I flashed the open US mode, the installed Viper, selected Sprint and low and behold its working. Thanks for this post!
fello781 said:
Ok friend, I already have it, I have a new signal and thanks for the help.
No black screen solution in applications?
thanks for your help
Click to expand...
Click to collapse
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP
lilares said:
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP
Click to expand...
Click to collapse
You're on Nougat with Sprint calls and data still working?
Sent from my 2PS64 using Tapatalk
FlowingAway said:
You're on Nougat with Sprint calls and data still working?
Sent from my 2PS64 using Tapatalk
Click to expand...
Click to collapse
Cant confirm cause I'm traveling outside US so I'm using another carrier. Now the Nougat only available for US Unlocked so I need someone to check with sprint Carrier. Buts yes, U need to flash Sprint radio. I can confirm U can unlock your sim card with my old radio.img.
lilares said:
Best news of the day, I've updated to US Unlock Nougat 7.0 and suddenly all the black screen gone. I don't have enough time to test but at least, the dialer, google map and some other app I knew would cause the black screen in Mashmallow now no longer black screen anymore.
Just update to latest US Unlocked with US Unlocked CID and MID then OTA to 7.0
U will lost root and TWRP. Maybe, we have to wait for a few day for a new TWRP
Click to expand...
Click to collapse
Confirmed. Nougat will fix every problem about black screen.
Still no TWRP and also no root