[Q] Pure-X-Blaster 4.3.1 Issues - Sony Xperia T, TL, TX, V

After installing, I see the message "could not find SIM card"
Wifi does not work
Unlocked bootloader
Installed via CWM

Might try flashing latest radio via Flashtool.

WhiteNeo said:
Might try flashing latest radio via Flashtool.
Click to expand...
Click to collapse
Where can I get it ?

Download a latest firmware ftf for your phone and flash it via Flashtool.. Unckeck all but baseband before starting

Related

need some help flashing a rom

i'm following steps to install monxdifieds rom and in the instructions it says
"Turn off device. (Hold power button + vol up until vibrates 3 times) [or use recovery turn off device option, if any]
Flash latest Sony's firmware (FTF) matching current latest monxDIFIED base rom using flashtools. Uncheck all WIPE options and exclude all EXCEPT KERNEL & BASEBAND to get latest matched kernel & baseband."
I don't fully understand what it means to flash sony's firmware matching current latest monxdified bas rom, could someone explain to me what this means? how would i go about flashing the sony firmware?
harryc1127 said:
i'm following steps to install monxdifieds rom and in the instructions it says
"Turn off device. (Hold power button + vol up until vibrates 3 times) [or use recovery turn off device option, if any]
Flash latest Sony's firmware (FTF) matching current latest monxDIFIED base rom using flashtools. Uncheck all WIPE options and exclude all EXCEPT KERNEL & BASEBAND to get latest matched kernel & baseband."
I don't fully understand what it means to flash sony's firmware matching current latest monxdified bas rom, could someone explain to me what this means? how would i go about flashing the sony firmware?
Click to expand...
Click to collapse
you need to download the "flash tools program" and download the .244 stripped firmware(link in yuga konami thread) then put the .244 firmware file in the flashtools firmware folder then flash the firmware before of after you flash the rom with flashtool
to get in recovery you either hold volume up or down(depending on if your using twrp or cwm) when the green light comes on
skinsfanbdh said:
you need to download the "flash tools program" and download the .244 stripped firmware(link in yuga konami thread) then put the .244 firmware file in the flashtools firmware folder then flash the firmware before of after you flash the rom with flashtool
to get in recovery you either hold volume up or down(depending on if your using twrp or cwm) when the green light comes on
Click to expand...
Click to collapse
im using mac osx, is there a version for osx? is the yuga konami thread in original android development section or the android development section?
harryc1127 said:
im using mac osx, is there a version for osx? is the yuga konami thread in original android development section or the android development section?
Click to expand...
Click to collapse
i dont know about the mac thing but the rom thread is in android development forum
skinsfanbdh said:
you need to download the "flash tools program" and download the .244 stripped firmware(link in yuga konami thread) then put the .244 firmware file in the flashtools firmware folder then flash the firmware before of after you flash the rom with flashtool
to get in recovery you either hold volume up or down(depending on if your using twrp or cwm) when the green light comes on
Click to expand...
Click to collapse
skinsfanbdh said:
i dont know about the mac thing but the rom thread is in android development forum
Click to expand...
Click to collapse
ok, so I wiped my phone clean before flashing the rom then flashed the stripped rom, but now my wifi isn't working. The wifi toggle is greyed out.
harryc1127 said:
ok, so I wiped my phone clean before flashing the rom then flashed the stripped rom, but now my wifi isn't working. The wifi toggle is greyed out.
Click to expand...
Click to collapse
did you flash the .244 kernel?
yep, in the end I just backup all my stuff, wiped the whole phone and returned it to stock, rooted it again, and flashed the custom rom again. problem solved!
dont forget to turn on the Debugging mode !!

flashing .245(indian) firmware

Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Deepam7325 said:
Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Click to expand...
Click to collapse
flashing with flashtool is same as updating via PCC or SUS. Go for flashtool
Deepam7325 said:
Recently i bricked my phone and recovered by flashing .257(indian) stock ftf using flashtool. Now i dont have ota update for .245 firmware. How should i update my phone to .245 firmware? Is there any other way other than flashing stock .245 using flashtool?
phone status: stock .257(rooted and cwm enabled with locked bootloader)
Click to expand...
Click to collapse
installing by flashtool is fast,simple,neat ..+1 from me aswell go for it.
happy flashing.
Flashing with flashtool is the easiest way I feel, just keep in mind that YOUR INTERNAL SD CARD WILL BE WIPED!!
Sent from my C5303 using XDA Premium 4 mobile app
As I do if my phone is in bootloop and now the flashtool does not recognize my phone in flash mode?? The phone lights up green and all but the flashtool does not pass the message "connect your phone in flash mode", the flash never initiates, before right mind had flashed a kernel for root, but now with the bootloop this does nothing.
What I can do?
If u have the CWM Recovery (Tap Volume + in the first vibration) what u can do is go there and select:
- Shutdown your XSP
1. For flash using Flashtool ur phone have to be completely off
2. When Flashtool ask u "connect ur device" u have to press Volume - and connect ur USB. No before it ask u
3. Enjoy
Sent from my C5303 using xda app-developers app
esloded said:
As I do if my phone is in bootloop and now the flashtool does not recognize my phone in flash mode?? The phone lights up green and all but the flashtool does not pass the message "connect your phone in flash mode", the flash never initiates, before right mind had flashed a kernel for root, but now with the bootloop this does nothing.
What I can do?
Click to expand...
Click to collapse
Sometimes happen, small fix to it is restart your pc.
RuchRha said:
Sometimes happen, small fix to it is restart your pc.
Click to expand...
Click to collapse
Now it...
Code:
13/038/2013 00:38:41 - INFO - Start Flashing
13/038/2013 00:38:41 - INFO - Processing loader
13/038/2013 00:38:41 - INFO - Checking header
13/038/2013 00:38:41 - INFO - Ending flash session
13/038/2013 00:38:41 - ERROR - Error in processHeader : 1 : FunciĆ³n incorrecta.
13/038/2013 00:38:41 - ERROR - Error flashing. Aborted
I cant flash the rom, what is it??
I could do it, the problem was my computer and jjj drivers, install everything on another pc and everything went perfectly.

[Q] Forgot to turn on usb debug before flashing,now stuck in bootloop

Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
Try to reflash 10.2.1.A.2.67 and make sure to check wipe is enabled
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
androidtweaker1 said:
You can flash the latest kitkat ftf via flashtool.
The firmware can be rooted
Click to expand...
Click to collapse
I tried to flash in the kit kat firmware,
but I am still stuck in the bootloop...
How can I turn on my usb debug and third party source?
I think is that not allowing me to flash anything in....
ElwinHoTin said:
Okay.
So I tried to root my xperia z with 10.4.1.B.0.101 firmware today.
but I forgot to turn on my usb debug before using flashtool to flash in a 10.3.1.A.2.67 firmware
Now my phone is stuck in a bootloop
Btw, my phone have a locked bootloader.
I am trying to flash the firmware to 10.4.1.B.0.101 again and I will try to process the root
What should I do now?
I would give any extra information if needed
Click to expand...
Click to collapse
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Mr.KiLLeR said:
I had the same problem , what I did was , i just flashed the old 4.3 FTF using flashtool which fixed it
Click to expand...
Click to collapse
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
ElwinHoTin said:
By old 4.3 ftf
Do you mean 10.4.1.B.0.101 ?
I am really new and I am noob
Sorry for bothering you guys...
Click to expand...
Click to collapse
Yes exactly ..
Mr.KiLLeR said:
Yes exactly ..
Click to expand...
Click to collapse
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
ElwinHoTin said:
I am trying to download the C6603 10.4.1.B.0.101 Generic HK ftf
Which should be what I have in my phone originally
Is that the one I should use?
Or I can just flash in any 10.4.1.B.0.101 ftf?
Click to expand...
Click to collapse
any one dude.. dont worry
Mr.KiLLeR said:
any one dude.. dont worry
Click to expand...
Click to collapse
It worked
Thank you soooooo much
You have saved my life
ElwinHoTin said:
It worked
Thank you soooooo much
You have saved my life
Click to expand...
Click to collapse
Gr8 I am glad that I helped ENJOY :good:
Same problem
hplease help me.. its not orking when i reflash it with 4.3 (i already had)
Xperia z3 D6653
Ok so I was trying to flash my z3 back to original Sony software because I was getting an error message in PC companion saying my phone cannot be updated because it contains modified software and I was flashing it using sony mobile flasher by androxyde and I forgot to enable USB debugging and unknown sources and now it's in a boot loop telling me "software update failed. Please plug your phone back in and try again"
Any ideas?
I was told to try using a different computer?
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!

need cwm recovery for stock .283 fw please urgent

i was on .569 fw before and i try to update it to the latest fw which is .283 using pc companion. after i try to update it, it says update failed. it is because i rooted and unlocked my bootloader before.
so i relocked my bootloader and flash stock .569.ftf using flashtool. and try to update to .283 using pc companion again. it finally worked. i succesfully upgraded my phone to the latest fw .283.
but then i realised root is gone, and i cant access cwm reovery when phone boots and pressing volume down button over and over again.
so i guess my cwm recovery is gone too.
so since im on fresh stock .283 fw, i need someone to give me a cwm recovery for me to flash on fastboot mode using flashtool.
and can i root .283 just by flashing superuser.zip that i flashed on .269 to root .283?
thanks in advance. i need it urgent though.
w1040 said:
i was on .569 fw before and i try to update it to the latest fw which is .283 using pc companion. after i try to update it, it says update failed. it is because i rooted and unlocked my bootloader before.
so i relocked my bootloader and flash stock .569.ftf using flashtool. and try to update to .283 using pc companion again. it finally worked. i succesfully upgraded my phone to the latest fw .283.
but then i realised root is gone, and i cant access cwm reovery when phone boots and pressing volume down button over and over again.
so i guess my cwm recovery is gone too.
so since im on fresh stock .283 fw, i need someone to give me a cwm recovery for me to flash on fastboot mode using flashtool.
and can i root .283 just by flashing superuser.zip that i flashed on .269 to root .283?
thanks in advance. i need it urgent though.
Click to expand...
Click to collapse
You will need to flash .230 kernel then root using any method mentioned ( like towel root) then re-flash the .283 kernel. once you have root, you can flash NUT's recovery for your phone. you can not directly flash. you will need to use computer to run recovery batch file

no signal after flashing custom rom c6902

hi guyz..
i have flashed cm 12.1 official along with modem files zip. mobile shows no sim inserted.
so i decided to go back to stock rom. even after flashing stock ftf file still no sim is detected. i came to know that i need to flash baseband from ftf but im not able to find anything related to baseband in ftf file. someone plzz help..:crying:
imran4848 said:
hi guyz..
i have flashed cm 12.1 official along with modem files zip. mobile shows no sim inserted.
so i decided to go back to stock rom. even after flashing stock ftf file still no sim is detected. i came to know that i need to flash baseband from ftf but im not able to find anything related to baseband in ftf file. someone plzz help..:crying:
Click to expand...
Click to collapse
Flash latest ftf of your revelent version then start fresh, wipe everything.!
kathanpatel1001 said:
Flash latest ftf of your revelent version then start fresh, wipe everything.!
Click to expand...
Click to collapse
tried. didnt work.
also tried software repair using pc companion.
imran4848 said:
tried. didnt work.
also tried software repair using pc companion.
Click to expand...
Click to collapse
Try to search for modem for c6902 and flash that.
gauravbhakuni90 said:
Try to search for modem for c6902 and flash that.
Click to expand...
Click to collapse
zip or ftf? already tried zip. didnt work. could not find ftf. plz provide link for ftf
imran4848 said:
zip or ftf? already tried zip. didnt work. could not find ftf. plz provide link for ftf
Click to expand...
Click to collapse
Zip file. Try searching Jaguar rom for z1 and in that thread go to download section and download c6902 modem files. Works everytime for me. And do thank the Dev in that thread.
gauravbhakuni90 said:
Zip file. Try searching Jaguar rom for z1 and in that thread go to download section and download c6902 modem files. Works everytime for me. And do thank the Dev in that thread.
Click to expand...
Click to collapse
tried sir...no change. I'm going nuts
imran4848 said:
tried sir...no change. I'm going nuts
Click to expand...
Click to collapse
Tried it from the same source I cited??
Which ROM are you on??
Edit - do you have ftf and flashtool installed??
gauravbhakuni90 said:
Tried it from the same source I cited??
Which ROM are you on??
Edit - do you have ftf and flashtool installed??
Click to expand...
Click to collapse
At present I'm on sony's latest firmware 5.1.1 . I flashed a pre rooted firmware downloaded form a xda thread(.236 build) I downloaded modem zip from the same source u mentioned sir and flashed in recovery. but there is no change:crying: I have flashtool installed in my pc and i even downloaded latest ftf from flashtool using xperiafirm and flashed it. but didnt solve problem
imran4848 said:
At present I'm on sony's latest firmware 5.1.1 . I flashed a pre rooted firmware downloaded form a xda thread(.236 build) I downloaded modem zip from the same source u mentioned sir and flashed in recovery. but there is no change:crying: I have flashtool installed in my pc and i even downloaded latest ftf from flashtool using xperiafirm and flashed it. but didnt solve problem
Click to expand...
Click to collapse
Do you have stock ftf file and flashtool installed ??
Bootloader unlocked ??
And please don't call me sir , I am no knight .
gauravbhakuni90 said:
Do you have stock ftf file and flashtool installed ??
Bootloader unlocked ??
And please don't call me sir , I am no knight .
Click to expand...
Click to collapse
I have bootloader unlocked. I have flashtool installed in my pc and using flashtool I flashed stock ftf file.
I didnt get you regarding ftf and flashtool installed? In my pc or Z1??
imran4848 said:
I have bootloader unlocked. I have flashtool installed in my pc and using flashtool I flashed stock ftf file.
I didnt get you regarding ftf and flashtool installed? In my pc or Z1??
Click to expand...
Click to collapse
But you said you flashed pre rooted firmware from recovery.
Clean flash stock ftf file from flashtool in flash mode then report.
gauravbhakuni90 said:
But you said you flashed pre rooted firmware from recovery.
Clean flash stock ftf file from flashtool in flash mode then report.
Click to expand...
Click to collapse
I have already tried that. At present Im on pre rooted firmware
imran4848 said:
I have already tried that. At present Im on pre rooted firmware
Click to expand...
Click to collapse
What options are you choosing to flash in flashtool. Select wipe all and don't exclude anything in flashtool. Try that.
gauravbhakuni90 said:
What options are you choosing to flash in flashtool. Select wipe all and don't exclude anything in flashtool. Try that.
Click to expand...
Click to collapse
Flashed in that manner only. Wiping all and not excluding anything.
I have a doubt. There is nothing related to 'Baseband' in contents list or in exclude?
I read somewhere that i need to flash baseband from ftf in order to fix. Is it true?
imran4848 said:
Flashed in that manner only. Wiping all and not excluding anything.
I have a doubt. There is nothing related to 'Baseband' in contents list or in exclude?
I read somewhere that i need to flash baseband from ftf in order to fix. Is it true?
Click to expand...
Click to collapse
When you are flashing the whole ftf. You are flashing the baseband too.
gauravbhakuni90 said:
When you are flashing the whole ftf. You are flashing the baseband too.
Click to expand...
Click to collapse
what am I supposed to do now??
I tried flashing this file http://forum.xda-developers.com/attachment.php?attachmentid=2564631&d=1391783645
but didnt fix. I am losing my imei after flashing this
imran4848 said:
what am I supposed to do now??
I tried flashing this file http://forum.xda-developers.com/attachment.php?attachmentid=2564631&d=1391783645
but didnt fix. I am losing my imei after flashing this
Click to expand...
Click to collapse
I don't know. If I were you I would clean flash the rom from flashtool not from recovery.
gauravbhakuni90 said:
I don't know. If I were you I would clean flash the rom from flashtool not from recovery.
Click to expand...
Click to collapse
I did clean flash rom from flashtool . but it didnt fix
Bro all you need is a sony flashtool, sony pc companion, your z1, and some patience.
first of all make a ftf of original firmware for you device this might help second step flash the ftf which you made using flashtool (remember this ftf is the orignal copy of stock firmware).
after flash process finished just simply turn on your device and this might get back your modem's and signal and yes your imei number as how it should be.

Categories

Resources