Hi, first of all thanks to anyone who reads this!
I'm in a bit of a corner:
I got my One off eBay from Germany (cidnum: T-MOB101) ... it arrived fully updated, running Sense (5.5/6 - not sure - the 'green one'
Full info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
...
version-main: 5.16.111.4
version-misc: PVT SHIP S-ON
...
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
...
security: on
build-mode: SHIP
...
commitno-bootloader: dirty-0e1af350
hbootpreupdate: 11
gencheckpt: 0
I was a bit quick on the trigger-finger and I:
- unlocked bootloader
- wiped EVERYTHING
- flashed Android Revolution HD 71.1 ROM
After that the phone started to reboot: it first fires up, immediately reboots and goes into recovery
Man, I said, ok what to to?
- I located a matching TWRP Nandroid backup (M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3.zip)
- restored backup, flashed stock recovery, relocked bootloader
- woila - the phone booots, ok great
- the phone finds OTA updates (some bugfixes, saying they fix OTA updates) - proceed with update, ok
- the phone boots, finds OTA update (3.4 I think) - proceed with update
- the update finishes
- now I'm in the boot-loop
Any ideas?
putimir said:
Hi, first of all thanks to anyone who reads this!
I'm in a bit of a corner:
I got my One off eBay from Germany (cidnum: T-MOB101) ... it arrived fully updated, running Sense (5.5/6 - not sure - the 'green one'
Full info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
...
version-main: 5.16.111.4
version-misc: PVT SHIP S-ON
...
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: T-MOB101
...
security: on
build-mode: SHIP
...
commitno-bootloader: dirty-0e1af350
hbootpreupdate: 11
gencheckpt: 0
I was a bit quick on the trigger-finger and I:
- unlocked bootloader
- wiped EVERYTHING
- flashed Android Revolution HD 71.1 ROM
After that the phone started to reboot: it first fires up, immediately reboots and goes into recovery
Man, I said, ok what to to?
- I located a matching TWRP Nandroid backup (M7 TWRP Nandroid Backup CID T-MOB101 2.24.111.3.zip)
- restored backup, flashed stock recovery, relocked bootloader
- woila - the phone booots, ok great
- the phone finds OTA updates (some bugfixes, saying they fix OTA updates) - proceed with update, ok
- the phone boots, finds OTA update (3.4 I think) - proceed with update
- the update finishes
- now I'm in the boot-loop
Any ideas?
Click to expand...
Click to collapse
Hi, dont know if you solve this, but i had the same CID phone.
So I went to page http://www.htc1guru.com/dld/guru_reset_m7_2-24-111-3-zip/ ; installed without granting root permision, i also installed stock recovery and radio. then i updated till now i am at 5.16.111.4 and waitin for 6.base.
I didnt have to relock bootloader to get OTA.
I met some corupted update when phone was updating, but phone donwload it again, updated and then a new fix4update shows..
If you are in bootloob and have locket bootloader, you have to unlock, then flash TWRP recovery and then start again with file I linked you to.
GL
Hello!
I got exactly the same problem, and I tried with the Guru_Reset_M7_2.24.111.3.zip and I can't update either. I also tred to SOFF with sunshine, but it tells me an error with the kernel (it doesn't like it).
Any idea? Thanks!
Sturgelose said:
Hello!
I got exactly the same problem, and I tried with the Guru_Reset_M7_2.24.111.3.zip and I can't update either. I also tred to SOFF with sunshine, but it tells me an error with the kernel (it doesn't like it).
Any idea? Thanks!
Click to expand...
Click to collapse
If you have the same MID & CID, you can go to T-Mobile Germany's site there is suppose to be a RUU 5.16.111.4 there. Download the RUU and run it, it will reset everything back to stock. Since, you are S-ON you will have to relock your bootloader prior to running the RUU.
majmoz said:
If you have the same MID & CID, you can go to T-Mobile Germany's site there is suppose to be a RUU 5.16.111.4 there. Download the RUU and run it, it will reset everything back to stock. Since, you are S-ON you will have to relock your bootloader prior to running the RUU.
Click to expand...
Click to collapse
Thanks majmoz!
I've been tryng to search, and I can only find OTAs, no RUUs. I don't speak german, and even with the google transator, I haven't been able to find this in their website, or any oter place. Any advice of where to search this?
Thanks
Sturgelose said:
Thanks majmoz!
I've been tryng to search, and I can only find OTAs, no RUUs. I don't speak german, and even with the google transator, I haven't been able to find this in their website, or any oter place. Any advice of where to search this?
Thanks
Click to expand...
Click to collapse
@AndyyyFTW Can you help out Sturgelose with the 5 version RUU? If you could send him the link it would be great. Thank you.
Sturgelose said:
Hello!
I got exactly the same problem, and I tried with the Guru_Reset_M7_2.24.111.3.zip and I can't update either. I also tred to SOFF with sunshine, but it tells me an error with the kernel (it doesn't like it).
Any idea? Thanks!
Click to expand...
Click to collapse
I found a TWRP 5.16.111.4 Nandroid backup. Hopefully, this will help!
majmoz said:
@AndyyyFTW Can you help out Sturgelose with the 5 version RUU? If you could send him the link it would be great. Thank you.
Click to expand...
Click to collapse
I found this one http://dl3.htc.com/application/RUU_M7UL_TMOUS_5.14.531.1_With%20Partial.exe
I don't know what the "WithPartial.exe" means. But the size (1.49 GB) seems to be fine.
And it's not for german phones (T-MOB101) but US phones (T-MOB010).
AndyyyFTW said:
I found this one http://dl3.htc.com/application/RUU_M7UL_TMOUS_5.14.531.1_With%20Partial.exe
I don't know what the "WithPartial.exe" means. But the size (1.49 GB) seems to be fine.
And it's not for german phones (T-MOB101) but US phones (T-MOB010).
Click to expand...
Click to collapse
Thanks for the reply, I found this site which may come in handy in the future. Just scroll down the site.
Related
Hey,
So I have an HTC One (Unlocked, HTC__E11)
It has 4.3 (Standard, with root), S-off.
Yesterday I wanted to restore it back to stock, so I could get the 4.4.2 OTA update, only a problem arrised.
I flashed back stock recovery -> tried updating OTA, got red triangle during update.
RUU gave me errors aswell.
So after some googling, I decided to downgrade the HBOOT to 1.44, but now I have a big problem.
USB won't work anymore in fastboot.
When I try either ADB or fastboot, my phone is just not recognized.
Windows also doesn't recognize the phone and just gives me an error (Both Windows 7 and Windows 8.1).
I suspect it's because of the HBOOT, but there's no way for me to revert it.
What I really want now is just to revert my phone back to stock 4.4.2 with all the updated original recovery, hboot, etc but I have no idea what I must do now as I can't use fastboot or adb.
Any suggestions?
Thanks in advance.
Mark_HTCOne said:
Hey,
So I have an HTC One (Unlocked, HTC__E11)
It has 4.3 (Standard, with root), S-off.
Yesterday I wanted to restore it back to stock, so I could get the 4.4.2 OTA update, only a problem arrised.
I flashed back stock recovery -> tried updating OTA, got red triangle during update.
RUU gave me errors aswell.
Click to expand...
Click to collapse
Be more precise here! What was the error codes? Did you modified/erased some files in /system? maybe you removed some stock apps? If you messed with /system files then the ota installation will fail.
Mark_HTCOne said:
So after some googling, I decided to downgrade the HBOOT to 1.44, but now I have a big problem.
USB won't work anymore in fastboot.
When I try either ADB or fastboot, my phone is just not recognized.
Windows also doesn't recognize the phone and just gives me an error (Both Windows 7 and Windows 8.1).
I suspect it's because of the HBOOT, but there's no way for me to revert it.
Click to expand...
Click to collapse
It will definitively not work on windows 8.1 but it should work on 7.
Mark_HTCOne said:
What I really want now is just to revert my phone back to stock 4.4.2 with all the updated original recovery, hboot, etc but I have no idea what I must do now as I can't use fastboot or adb.
Any suggestions?
Thanks in advance.
Click to expand...
Click to collapse
use your windows 7 pc
download and use latest android sdk here
download and install latest htc drivers via htc sync here then uninstall htc sync (drivers will be untouched)
use usb ports at the back of your computer (don't use usb hub)
post the output of fastboot getvar all minus IMEI/SN
Okay so I just managed to get it to work on my Windows 7 PC by deleting all HTC drivers, and simply messing about with some drivers I found on the net (I have no idea how, but suddenly fastboot USB was working, so I immediatly flashed TWRP and the latest firmware).
So this is the new situation:
4.3 OTA Rooted
S-off
RELOCKED bootloader
TWRP 2.6.3.3
Latest firmware (Including Hboot 1.56)
What would be the best and easiest way for me to go back to 4.4.2 OTA (I'd like to keep s-off)
Mark_HTCOne said:
Okay so I just managed to get it to work on my Windows 7 PC by deleting all HTC drivers, and simply messing about with some drivers I found on the net (I have no idea how, but suddenly fastboot USB was working, so I immediatly flashed TWRP and the latest firmware).
So this is the new situation:
4.3 OTA Rooted
S-off
RELOCKED bootloader
TWRP 2.6.3.3
Latest firmware (Including Hboot 1.56)
What would be the best and easiest way for me to go back to 4.4.2 OTA (I'd like to keep s-off)
Click to expand...
Click to collapse
alray said:
Be more precise here! What was the error codes? Did you modified/erased some files in /system? maybe you removed some stock apps? (YES/NO) If you messed with /system files then the ota installation will fail.
post the output of fastboot getvar all minus IMEI/SN
Click to expand...
Click to collapse
don't forget to quote me or mention me, otherwise I can't be notified by your posts.
alray said:
don't forget to quote me or mention me, otherwise I can't be notified by your posts.
Click to expand...
Click to collapse
Sorry about that.
Here's the info!
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
serialno:
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4182mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bee46337
hbootpreupdate: 11
gencheckpt: 0
Mark_HTCOne said:
Sorry about that.
Here's the info!
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.23.3263.28
version-cpld: None
version-microp: None
version-main: 4.19.401.8
version-misc: PVT SHIP S-OFF
serialno: remove
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__E11
battery-status: good
battery-voltage: 4182mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bee46337
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
what was the ruu error code? It was a ruu.exe? If you can answer all my question this will be much easier and faster.
alray said:
what was the ruu error code? It was a ruu.exe? If you can answer all my question this will be much easier and faster.
Click to expand...
Click to collapse
Error 170, with USB, with an ruu.exe.
The thing is, I gained access to fastboot again, and I want to be able to receive the OTA update of 4.4.2
My current situation is
4.3 OTA Rooted
S-off
UNLOCKED bootloader
Stock recovery 3.62.401.1
Latest firmware (Including Hboot 1.56)
But OTA update doesn't show up anymore, what must I change?
Mark_HTCOne said:
I can't really remember,
The thing is, I gained access to fastboot again, and I want to be able to receive the OTA update of 4.4.2
My current situation is
4.3 OTA Rooted
S-off
UNLOCKED bootloader
Stock recovery 3.62.401.1
Latest firmware (Including Hboot 1.56)
But OTA update doesn't show up anymore, what must I change?
Click to expand...
Click to collapse
you should start over with a fresh install. Flash the 1.28.401 ruu.zip then apply all ota.
alray said:
you should start over with a fresh install. Flash the 1.28.401 ruu.zip then apply all ota.
Click to expand...
Click to collapse
Thanks!
I just flashed 1.28.401.8 ruu.zip and it worked!
I can get the OTA updates now, really, you are a life saver.
Would've taken me ages to figure out that flashing the RUU zip would work.
Thanks again.
It's all solved now, this topic can be closed.
Mark_HTCOne said:
Thanks!
I can get the OTA updates now, really, you are a life saver.
Would've taken me ages to figure out that flashing the RUU zip would work.
Thanks again.
It's all solved now, this topic can be closed.
Click to expand...
Click to collapse
glad it worked. Can you please edit your thread title to [SOLVED] HTC One - USB not recognizing after downgrade HBOOT
Hi Guys,
I bought HTC one from Ebay, which was suppose to be Europe version but turns out to be HK version with OS - 2.24.708.4. OTA was not able to install with red triangle error in recovery, after some search i found out that the CID number must be tempered, and i saw that it is 11111 with S-off though it showing to be LOCKED. Which means i can install any custom ROM. I want to have 4.4 with sense 6, So i unlocked flashed twrp 2.6.3 and rooted. I downloaded Android revolution custom ROM (for international version) and flashed it. But afterwards the phone is in bootloop. I can load bootloader and use fastboot along with twrp. But i can't see anything in /sdcard, so data mount is not working it seems. There is no nandroid backup (my mistake ). I repeated the unlock/rooting process when the phone went in bootloop, that might have messed up with sdacrd access, as I flashed revolution rom from there only.
I am aware that by flashing RUU i can get back to stock, but I cant find any RUU for this particular baseband and HBOOT, if yes please let know what should be the closest RUU for this version ? If RUU is not the option, what should i do now ?
Current situation: NO ROM installed, only access to bootloader (fastboot) and recovery with no sdcard mounted.
Also, even though i rooted properly, i cant see "TEMPERED" in the bootloader.
CID-111111
HBOOT - 1.54
OS-2.24.708.4
RADIO 4A.18.3250.15
Additonal info
Attached image above it before Unlocking, after unlcoking and flashing recovery it just says unlcoked, rest everything remains same. I also tried sideloading with adb, the device is recognized in adb but i can't send big files, my system is frozen after running the command. But when i send a test file, it is sideloaded quickly.
Can anyone suggest, which ROM to sideload which will be compatible with my device ??
abhish1982 said:
Attached image above it before Unlocking, after unlcoking and flashing recovery it just says unlcoked, rest everything remains same. I also tried sideloading with adb, the device is recognized in adb but i can't send big files, my system is frozen after running the command. But when i send a test file, it is sideloaded quickly.
Can anyone suggest, which ROM to sideload which will be compatible with my device ??
Click to expand...
Click to collapse
you need twrp 2.6.3.3 to flash arhd rom, will not work with 2.6.3.0.
if you want the phone to be European version use a WWE ruu (.401 version)
change cid and mid to match the .401 ruu
then flash the ruu.
stay s-off and unlocked.
Thanks for your reply
alray said:
you need twrp 2.6.3.3 to flash arhd rom, will not work with 2.6.3.0.
if you want the phone to be European version use a WWE ruu (.401 version)
change cid and mid to match the .401 ruu
then flash the ruu.
stay s-off and unlocked.
Click to expand...
Click to collapse
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FA3AGW900725
imei: 3558590549xxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
abhish1982 said:
Thanks for your reply
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15 THIS IS THE RADIO
version-cpld: None
version-microp: None
version-main: 2.24.708.4 THIS IS THE OS or ROM VERSION
version-misc: PVT SHIP S-OFF S_OFF MEANS YOU CAN USE ANY RUU THAT MATCHES YOUR MODELID (MID)
serialno: FA3********** (REMOVE THIS COMPLETELY)
imei: 355************ (REMOVE THIS COMPLETELY)
meid: 00000000000000
product: m7_ul DEVICE MODEL
platform: HBOOT-8064
modelid: PN071**** SHOW ALL OF THIS
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off S_OFF = SECURITY OFF
build-mode: SHIP
boot-mode: FASTBOOT DEVICE CURRENT STATE, YOU ARE IN FASTBOOT MODE
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
See above red text
abhish1982 said:
Thanks for your reply
I am trying to download this RUU from htcguru1 site, can i try any other international version as want quickest update to android and sense (unofficial)
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
also, what is the benefit of cid and mid change? can i leave it as it is ? Will it create issue for future mod or rom changes ?
I am pasting all info about device here (i want to be 100% sure that i am doing correct procedure this time ). many sites are talking about baseband for right RUU which is different for WWE version.
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FA3AGW900725
imei: 3558590549xxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN071****
cidnum: 11111111
battery-status: good
battery-voltage: 4268mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
alray said:
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
Click to expand...
Click to collapse
But can i do it without flashing RUU now, as adb sideload is freezing my PC and sdcard is not showing mounted in recovery. Not sure if i flash twrp 2.6.3.3 will show my sdcard as I have the ARHD downloaded there.
Thanks for your patience friend, I am on steep learning curve since yesterday.
alray said:
if you want to use ruu, you must make sure both cid and mid match the ruu you want to use. If you want to use custom rom, no need to tamper with these. You might want to take a look at arhd 71.1 or viperone, these are very good roms, always up to date (even much faster update then the official roms)
Click to expand...
Click to collapse
I can't change mid now, as data mount is failing, saying 0 internal storage, what to do now ?
Other issue is the MID as per Getvar all is "PN071****" , how come it is like this ? can't find this issue anywhere
Please help I have the RUU but its failing may be becuase of MID, if i remain supercid, i guess i can still flash but may be MID is creating issues here. How to change the mID ?
Also, since data mount is failing adb is not worling properly, it was working till yesterday.
I guess flashing stock recovery might solve data access issue, but i can't find stock recovery for my version-main 2.24.708.4, please help with stock recovery
if you wanna same rom 2.24.708.4 or rom for your region 708 not available
you should change mid follow link to flash this tool use adb sideload if you cant access phone storage
and flash any RUU you want
i advice 4.3 US Dev Edition Rom which is update first of all
Developer Edition
modelid: PN0712000
cid: BS_US001
4.4.2 Rom RUU keep troubling
Other methods you can found HERE
yatindroid said:
if you wanna same rom 2.24.708.4 or rom for your region 708 not available
you should change mid follow link to flash this tool use adb sideload if you cant access phone storage
and flash any RUU you want
i advice 4.3 US Dev Edition Rom which is update first of all
Developer Edition
modelid: PN0712000
cid: BS_US001
4.4.2 Rom RUU keep troubling
Other methods you can found HERE
Click to expand...
Click to collapse
Hi Yatin,
I got original recovery but not original stock ROM, so I am still in a fix. Now i can see internal storage if I flash twrp 2.6.3.3., but it seems all the files has been wiped or formatted, ARHD rom file is not available. Also, adb sideload is not working. MID change is the most important now. I dont know how MID is with asteriks. I guess becuase of MID no RUU can be installed. I tried fastboot oem rebootRUU for sending OTA ROM, but it is now in bootloop again.
If you can PM me your phone number, i would call for some understanding. Thanks for your time.
Please PM me your phone number, if that is possible.
abhish1982 said:
Hi Yatin,
I got original recovery but not original stock ROM, so I am still in a fix. Now i can see internal storage if I flash twrp 2.6.3.3., but it seems all the files has been wiped or formatted, ARHD rom file is not available. Also, adb sideload is not working. MID change is the most important now. I dont know how MID is with asteriks. I guess becuase of MID no RUU can be installed. I tried fastboot oem rebootRUU for sending OTA ROM, but it is now in bootloop again.
If you can PM me your phone number, i would call for some understanding. Thanks for your time.
Please PM me your phone number, if that is possible.
Click to expand...
Click to collapse
MID with the 4 astrix is super MID, I had the option to have my phone changed to that when I had my phone s-off'd
Have you tried to use adb push instead of sideload ?
as there is no 708 ruu available for your phone you will have to use a custom rom.
put the rom in your adb/fastboot folder on your computer and rename it to rom.zip
plug your phone into the computer and boot it into recovery (main screen only)
open a command prompt on your computer inside the adb/fastbootfolder, (control + shift + right mouse click, open command window here)
then type adb push rom.zip /sdcard/
it will take a while so be patient, the command window will let you know when it is done.
Thanks guys for all your time and help. I am able to change my MID using MID change utility quoted by yatinder using adb sideload. Now after that i have CID HTC__001 and MID PN0710000 same as for Europe version. But when i try runing RUU
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1(1)
It is giving me ERROR [155] Please choose correct ROM utilit for your device. I flashed stock recovery and relocked bootloader. Can you guys suggest a correct RUU here are my new details
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FAxxxxxxxxxxx
imei: 35xxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 4310mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66
hbootpreupdate: 11
gencheckpt: 0
Also, for the suggestion of using custom ROM, i can't unlock my bootloader now to start with twrp 2.6.3.3 and ARHD. Its giving me this error now
C:\Flashtool\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.150s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.160s
abhish1982 said:
Thanks guys for all your time and help. I am able to change my MID using MID change utility quoted by yatinder using adb sideload. Now after that i have CID HTC__001 and MID PN0710000 same as for Europe version. But when i try runing RUU
RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1(1)
It is giving me ERROR [155] Please choose correct ROM utilit for your device. I flashed stock recovery and relocked bootloader. Can you guys suggest a correct RUU here are my new details
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.18.3250.15
version-cpld: None
version-microp: None
version-main: 2.24.708.4
version-misc: PVT SHIP S-OFF
serialno: FAxxxxxxxxxxx
imei: 35xxxxxxxxxxxxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 4310mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66
hbootpreupdate: 11
gencheckpt: 0
Also, for the suggestion of using custom ROM, i can't unlock my bootloader now to start with twrp 2.6.3.3 and ARHD. Its giving me this error now
C:\Flashtool\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.150s]
writing 'unlocktoken'...
FAILED (remote: unlock token check failed)
finished. total time: 0.160s
Click to expand...
Click to collapse
Since you are S-Off, use a custom recovery masked in a firwmare package: you can use of these "firmware" packages (m7_u/ul only):
http://www.androidfilehost.com/?w=files&flid=13085
in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip fw_m7ul_TWRP_2.6.3.3_1.26.401.33.zip
fastboot reboot-bootloader
-> enter RECOVERY (should be TWRP or CWM now)
and use scotty1223's commands in custom recovery http://forum.xda-developers.com/showthread.php?t=2475914 to unlock bootloader
Code:
C:\ADB3>[B][COLOR="Blue"]adb devices[/COLOR][/B]
List of devices attached
HT34xxxxxxxx recovery [I]<- you need to be in custom recovery to
ensure [B]root[/B] privileges
i.e. an adb shell with [B]#[/B] as opposed to [B]$[/B][/I]
C:\ADB3>[B][COLOR="Blue"]adb shell[/COLOR][/B]
[SIZE="1"][I][U]Note[/U]
CWM shell prompt usually looks like [B]~#[/B]
TWRP shell prompt usually looks like [B]~ # ←[6n[/B]
it doesn't matter, you just type (or even better copy/paste) the commands in bold blue
[/I][/SIZE]
[I][SIZE="1"]Setting UNLOCKED[/SIZE][/I]
~ # [B][COLOR="Blue"]echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796[/COLOR][/B]
echo -ne "HTCU" | dd of=/dev/block/mmcblk0p3 bs=1 seek=33796
4+0 records in
4+0 records out
4 bytes (4B) copied, 0.007691 seconds, 520B/s
~ # [B][COLOR="Blue"]exit[/COLOR][/B]
exit
C:\ADB3>[B][COLOR="Blue"]adb reboot bootloader[/COLOR][/B]
^^ if this doesn't work in your particular version,
just select reboot to bootloader in TWRP.
ps: your version-main will now say 1.26.401.33 (reflecting the recovery version 2.6.3.3); it didn't actually change, but version-main always shows the last thing flashed in ruu mode.
.
Also, there's no need to relock bootloader for RUU flashing when you are S-Off.
Do not ever go S-ON!!
Thanks nkk7, for your timely advise, device is now back to unlocked.
Yatin,
Using adb push, I am able to get the ARHD ROM in the sdcard, but after installation it is stuck on HTC logo. When i do factory reset, it is going back to recovery. What to do now? After flashing, i wipe cache and dalvik.
abhish1982 said:
Thanks nkk7, for your timely advise, device is now back to unlocked.
Yatin,
Using adb push, I am able to get the ARHD ROM in the sdcard, but after installation it is stuck on HTC logo. When i do factory reset, it is going back to recovery. What to do now? After flashing, i wipe cache and dalvik.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2228274&page=3
EDIT: are you getting any "unable to mount internal storage" and/or unable to "mount /data errors"?
nkk71 said:
http://forum.xda-developers.com/showthread.php?t=2228274&page=3
EDIT: are you getting any "unable to mount internal storage" and/or unable to "mount /data errors"?
Click to expand...
Click to collapse
It is only saying E: Unable to mount '/USB-OTG'
Any ideas, do i need to flash firmware first for my original version-main and then twrp and ARHD ?
abhish1982 said:
It is only saying E: Unable to mount '/USB-OTG'
Any ideas, do i need to flash firmware first for my original version-main and then twrp and ARHD ?
Click to expand...
Click to collapse
that error is OK, since you don't have an OTG cable attached.
But just so I get this right, can you explain what your ultimate goal is?
nkk71 said:
that error is OK, since you don't have an OTG cable attached.
But just so I get this right, can you explain what your ultimate goal is?
Click to expand...
Click to collapse
Phone is softbricked and I cant boot into any OS. I dont have any nandroid backups before flashing ARHD for the first time, from there on its a long journey. First i tried to restore it to stock, so went with RUU route. But even that is failing even though I had right CID and MID, may version-main was the issue.
Now i want ARHD or stock either to work. Current situation -Soft bricked, Unlocked, S-off, TWRP 2.6.3.3 OS original version 2.24.708.4. I reflashed ARHD, at the end of install (with full success, the device shut down automatically) When i start it shows HTC icon (with red text below) and nothng happen afterwards. I waited for 10 mins approximatley. Ultimately I want latest 4.4 with HTC sense. It seems stock option is very cumbersome so I am ok with Custom ROM. Should I try some other ROM ?
abhish1982 said:
Phone is softbricked and I cant boot into any OS. I dont have any nandroid backups before flashing ARHD for the first time, from there on its a long journey. First i tried to restore it to stock, so went with RUU route. But even that is failing even though I had right CID and MID, may version-main was the issue.
Now i want ARHD or stock either to work. Current situation -Soft bricked, Unlocked, S-off, TWRP 2.6.3.3 OS original version 2.24.708.4. I reflashed ARHD, at the end of install (with full success, the device shut down automatically) When i start it shows HTC icon (with red text below) and nothng happen afterwards. I waited for 10 mins approximatley. Ultimately I want latest 4.4 with HTC sense. It seems stock option is very cumbersome so I am ok with Custom ROM. Should I try some other ROM ?
Click to expand...
Click to collapse
First off, stay S-Off!! Do not even think about S-On.
Second, if you want to go for 100% stock, check my guide http://forum.xda-developers.com/showthread.php?t=2541082
using ruu.zip method with the 1.28.401.7 ruu.zip
Third, if you want ARHD or any other custom ROM, just follow the steps mentioned in the Frequently Asked Question sticky I linked earlier. assuming you checked MD5, used twrp 2.6.3.3, etc, then you didn't wait long enough for the ROM to boot up; as mentioned the first bootup (after a clean install) will take close to 20 mins.
Let me know if you have any questions
Hi Everyone,
Okay so I have spent the last 3 hours following various guides in order to restore my ViperOne ROM HTC One M7 to a stock HTC ROM along with locking the bootloader again, everything I've tried has failed though. I'm wondering if anyone here can help me as I need to sell this phone ASAP but can't do that until I restore to stock.
Anyway, the bootloader was unlocked using the HTCDev website and I then installed the custom ROM after that. The Bootloader version appears to be 1.57, not sure if that actually matters.
I tried locking the bootloader which worked and then tried to restore using the O2 UK RUU which failed (The app just crashes at the same point every time).
So I'd really appreciate any help from you guys
Thanks in advance
sheppy1 said:
Hi Everyone,
Okay so I have spent the last 3 hours following various guides in order to restore my ViperOne ROM HTC One M7 to a stock HTC ROM along with locking the bootloader again, everything I've tried has failed though. I'm wondering if anyone here can help me as I need to sell this phone ASAP but can't do that until I restore to stock.
Anyway, the bootloader was unlocked using the HTCDev website and I then installed the custom ROM after that. The Bootloader version appears to be 1.57, not sure if that actually matters.
I tried locking the bootloader which worked and then tried to restore using the O2 UK RUU which failed (The app just crashes at the same point every time).
So I'd really appreciate any help from you guys
Thanks in advance
Click to expand...
Click to collapse
Post a fastboot getvar all with the imei and serialno removed. I am guessing that the RUU you ran was for an earlier version and unless you are S-OFF you can only run RUUs that are same OS version or higher.
You will need to use this guide to return to stock.
majmoz said:
Post a fastboot getvar all with the imei and serialno removed. I am guessing that the RUU you ran was for an earlier version and unless you are S-OFF you can only run RUUs that are same OS version or higher.
You will need to use this guide to return to stock.
Click to expand...
Click to collapse
Hi! Sorry for the late reply, please find below the output that you requested:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 3811mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-e47fb74b
hbootpreupdate: 11
gencheckpt: 0
You were correct, I was trying to boot a lower version. I heard that people have had luck using Firewater to S-OFF with CM11 installed. It didn't help me though. Anything you might be able to suggest would be a massive help! Thanks
sheppy1 said:
Hi! Sorry for the late reply, please find below the output that you requested:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__001
battery-status: good
battery-voltage: 3811mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-e47fb74b
hbootpreupdate: 11
gencheckpt: 0
You were correct, I was trying to boot a lower version. I heard that people have had luck using Firewater to S-OFF with CM11 installed. It didn't help me though. Anything you might be able to suggest would be a massive help! Thanks
Click to expand...
Click to collapse
Based on your getvar all you have a Int'l (.401) phone not an O2 UK branded phone. You will need to follow the directions of this site for stock rom 5.11.401.10 and you should be back whole. You can get the stock firmware if you need it from this site: http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC%2FHTC_One%2F401%2F Just select the 5.11.401.10 firmware.
For S-OFF, you need to be as close to stock as you can. If you are getting "whelp not able to S-OFF" then you might look at Sunshine S-OFF, but there is a price use it.
I realised that I had the international version shortly after posting my information back to you in this thread. Okay so I'm not really interested in getting S-OFF, I only wanted it to be able to use the RUU to restore to stock. So if I just follow method 1 from the post you linked me too, will I be back to get back to stock sense? I assume that I would still see "relocked" and "tampered" in my bootloader?
Thanks for all your help so far!
That worked a charm!!! I'm back on stock FW!!! Thank you! One thing though, will the person I sell the phone too be able to get software updates in future?
sheppy1 said:
I realised that I had the international version shortly after posting my information back to you in this thread. Okay so I'm not really interested in getting S-OFF, I only wanted it to be able to use the RUU to restore to stock. So if I just follow method 1 from the post you linked me too, will I be back to get back to stock sense? I assume that I would still see "relocked" and "tampered" in my bootloader?
Thanks for all your help so far!
That worked a charm!!! I'm back on stock FW!!! Thank you! One thing though, will the person I sell the phone too be able to get software updates in future?
Click to expand...
Click to collapse
If you have stock rom, stock recovery & stock firmware, he/she should be able to get OTA assuming you did not put a custom recovery or root after flashing the stock fw.
majmoz said:
If you have stock rom, stock recovery & stock firmware, he/she should be able to get OTA assuming you did not put a custom recovery or root after flashing the stock fw.
Click to expand...
Click to collapse
That's great news! Would the fact that I ran the stock FW recovery zip from your link mean that I no longer have TWRP on my phone or do I have to do something else to get rid of that too?
sheppy1 said:
That's great news! Would the fact that I ran the stock FW recovery zip from your link mean that I no longer have TWRP on my phone or do I have to do something else to get rid of that too?
Click to expand...
Click to collapse
Yes, you will have stock recovery, stock radio and stock hboot.
majmoz said:
Yes, you will have stock recovery, stock radio and stock hboot.
Click to expand...
Click to collapse
Thanks for all your help!
Should my bootloader still say "tampered"?
sheppy1 said:
Should my bootloader still say "tampered"?
Click to expand...
Click to collapse
Yes, you would have to be S-OFF to reset it.
Okay thank you! Was just thinking that something sill wasn't back to stock so thought I'd check
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
acnak said:
Hi,
So I have used a guru reset for my Vodafone AU branded HTC One (M7) as there is no RUU for it. I have gone ahead and "relocked" the bootloader (I'm S-ON BTW), and then attempted to run OTA. All works fine until it finished installing the update after which it just goes into a boot loop. I've attempted this twice, both times wiping everything beforehand and installing stock recovery (obviously) and stock radio. Is there something else I need to do to get the OTA to work properly or is it impossible to run OTA using this guru reset.
Any help would be much appreciated.
Click to expand...
Click to collapse
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
yatindroid said:
we need some more info
fastboot getvar all (remove imei & serial no)
which Guru reset rom you are using ? and which OTA ?
Click to expand...
Click to collapse
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
acnak said:
I'm not allowed to post links, it was from htc1guru and the pathway is /dld/guru_reset_m7_2-24-980-2-zip/
It is the latest OTA available, containing Sense 5.5 and Android 4.4.2. I'm not on stock anymore so I don't know any more specifics.
This is the getvar info:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: VODAP021
battery-status: good
battery-voltage: 3912mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
This was the only stock ROM for Vodafone AU I can find. I originally made a nandroid backup when I first rooted the phone but that has since been accidentally deleted. If you have a more recent version of the stock Vodafone AU ROM that would be much appreciated.
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
deeevan said:
version-main is the most important bit and it's blank :-/ I think older versions of TWRP or CWM had a blank version-main bug? Do you remember what was the last OTA update you took or roughly when? Otherwise, maybe update recovery and see if version-main shows up.
Australian stock unbranded nandroids should also work for you. Go check the Australian users thread for nandroid backups for almost every version (x.x.980.x).
@yatindroid I'm curious about making my own reset ROM. Got any links to info/how to?
Click to expand...
Click to collapse
Do you have Nandroid backup ?
I have Ubuntu so its easy to open and extract nandroid backup and compression
open nandroid backup extract system and data/preload folder
Take any reset rom replace its system and data folder to your backup folders
replace boot recovery radio files from same version (extract from OTA firmware)
edit aroma config details version etc with notepad++
now zip all files and its ready nothing much require
I think @Joeisgood99 have reset rom 6.xx.980.x version
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
deeevan said:
Aah pretty simple then. Yeah, I have nandroid backups. In fact I supplied the contents of the reset ROM in question in this thread. My main stumbling block was downloading a reset ROM as htc1guru was down the last couple times I thought about doing this.
Click to expand...
Click to collapse
ok i will send build base zip
@deeevan & @yatindroid.
I'm away from my computer until Friday so can't upload my aroma reset to stock until then.
I never uploaded it coz I haven't had a chance to test it ( deeevan understands why) as 6.11.980.12 is still the latest OTA for Optus Australia, and that's the version my reset will take you back to.
When I get home I'll post a link on the Aussie m7 thread and I'll pm the link to you as well yatindroid in case u need to pass on to others. @deeevan below is the link (go back a page or two,) where @alray walks me through how to make your own aroma reset. All u need is a RUU/OTA of what version u wanna go back to, any old aroma reset .zip and @alray s detailed instructions and your set.
http://forum.xda-developers.com/htc...ersions-stock-rom-t2994683/page4#post59335167
Have a good one guys!
yatindroid said:
ok i will send build base zip
Click to expand...
Click to collapse
Thanks! 6MB is much nicer to download than 1GB+, especially when I'm going to delete most of that anyway
yatindroid said:
That reset rom is very old version so after that you cant flash ota
You need more recent rom
Your version main not shows anything so see at fastboot screen any how find firmware version
Do you have Australia Vodafone ?
A member made kitkat reset rom for i will send you link for that
Click to expand...
Click to collapse
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Azurewren said:
Sorry for resurrecting an old zombie thread, but after a few days of searching the forums and multiple flashes and resetting of my phone (HTC One m7, Australia Vodafone), this has been the thread closest to my own issue. Like OP Poster acnak, I am trying to reset my phone to stock using Guru Reset (guru_reset_m7_2-24-980-2.zip) and while it works, when it goes to install an OTA when it reboots it gets stick in a boot loop.
I have looked for a more recent reset but can't find one. Can someone point me in the direction of one, or give pointers on how to make one myself from one of the ota I have downloaded... or something equally as easy but obscure that I haven't found it yet.
Fastboot getvar all Info:
INFOversion: 0.5
INFOversion-bootloader: 1.61.0000
INFOversion-baseband: 4A.17.3250.14
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 7.21.980.22
INFOversion-misc: PVT SHIP S-ON
INFOserialno: ---
INFOimei: ---
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: VODAP021
INFObattery-status: good
INFObattery-voltage: 4321mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-0e2a13e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Cheers and thanks in advance,
Azurewren
Click to expand...
Click to collapse
You can't use that guru reset rom to restore your phone, its way to old, your phone is running the 7.21.980.22 firmware so you would need a 7.21.980.2 or 7.21.980.22 guru reset rom and unfortunately there are no guru reset roms for 7.xx.xxx.x version. You can't make a guru reset rom from an ota update. ota updates are only patches, not the entire system and even if it would be possible to do it, you would have the same problem since the reset rom wouldn't match your firmware version.
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
alray said:
Simply flash the 7.21.980.22 RUU using instructions from here
This will reset your phone back to 100% stock.
Click to expand...
Click to collapse
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Azurewren said:
Many thanks on the link and info. I followed the instructions but got the following fail message
Code:
(bootloader) signature checking...
FAIL12 signature verify fail
FAILED (remote: 12 signature verify fail)
From my understanding this means there are issues with my bootloader version which is 1.61.0000. Is there anyway to change this, or an alternative file that corresponds with my hboot version?
Cheers
Click to expand...
Click to collapse
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
alray said:
Is your bootloader still unlocked? It smust locked or relocked to flash the RUU.
Click to expand...
Click to collapse
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Azurewren said:
Nope, it is relocked as per the instructions. The bootloader screen is as follows:
Code:
[COLOR="Black"]*** TAMPERED ***[/COLOR]
[COLOR="Magenta"]*** RELOCKED ***[/COLOR]
[COLOR="DarkGreen"]M7_UL PVT SHIP S-ON RH
HBOOT-1.61.0000
RADIO-4A.17.3250.14
OpenDSP-v35.120.274.0718
OS-7.21.980.22
eMMC-boot 2048MB
May 13 2015,01:15:11.27025[/COLOR]
Click to expand...
Click to collapse
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
alray said:
Your phone was in booted in ruu mode (not in bootloader) when trying to flash the file (black screen with silver htc logo)?
Click to expand...
Click to collapse
Yep, I followed the instructions you linked for me.
Azurewren said:
Yep, I followed the instructions you linked for me.
Click to expand...
Click to collapse
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
alray said:
Can you confirm if the md5 value of your file is 23ed1efd43cda3a5a1a6363ee73ca9b4
You can download the required tool here: http://www.winmd5.com/
Click to expand...
Click to collapse
Okay. Downloaded and verified. The file I am using has the same md5 value as what you commented up above.
Hello, guys. How you doing?
UPDATE: it's solved, i got back to stock rom after flashing this: https :// fl1.androidfilehost.com/dl/2k6GKx4IJOgIhD09zRzbzw/1441027324/95897840722641610/Reset_rom_6.07.1540.2.zip?
Now I'm going to do a BACKUP haha
I am with a HTC ONE M7 Internation/Unlocked Soft-Bricked, with no OS... Here are some information:
- Using TWRP 2.8.7.0 custom recovery for M7 (latest version)
- Unlocked bootloader
- Rooted (at least I did it before wipping my OS)
- S-ON!
- HBOOT v.1.57
- Already have ADB/Fastboot on my PC
- Modelid: PN0711000
- Cidnum: HTC__332
Here's my tale:
I tried to install RUU M7 Lollipop ROM, from HTC's website. But, at the very beggining of the instalation (4%), the RUU software said it lost my device. I did it while in fastboot mode, because it was the only way RUU recognized my phone. Then I could not install Lollipop ROM by RUU method, so I decided to flash a Lollipop ROM Unlocked Version for One M7.
I knew that for doing it I would need to install some custom recovery on my phone, unlock its bootloader mode and install on my PC ADB and Fastboot. I did all of this; the bootloader unlocked I did from HTC's website guide. So, I put on my phone a ROM in zip extension, boot it on recovery mode. I read that I should wipe data, cache, calvik cache and, maybe, system. And I did it... with NO BACKUP of original ROM --' I know I was stupid...
So I wipe this partitions, entered Install menu and tried to run instalation of the ROM zip file. It didn't work!!! Some error: "E: error executing updater binary in zip..." And I tried to flash different ROMs, all of them showed this error...
Then now I am with a Soft-Bricked HTC ONE M7 which has no OS. Some pics of my status: https: // w w w .dropbox.com/s/ruyen2ikn0u5i0u/Soft-Bricked%20M7.rar?dl=0
I hope you can help me
Please, help me :crying:
Atadie said:
Hello, guys. How you doing?
I am with a HTC ONE M7 Internation/Unlocked Soft-Bricked, with no OS... Here are some information:
- Using TWRP 2.8.7.0 custom recovery for M7 (latest version)
- Unlocked bootloader
- Rooted (at least I did it before wipping my OS)
- S-ON!
- HBOOT v.1.57
- Already have ADB/Fastboot on my PC
- Modelid: PN0711000
- Cidnum: HTC__332
There's my tale:
I tried to install RUU M7 Lollipop ROM, from HTC's website. But, at the very beggining of the instalation (4%), the RUU software said it lost my device. I did it while in fastboot mode, because it was the only way RUU recognized my phone. Then I could not install Lollipop ROM by RUU method, so I decided to flash a Lollipop ROM Unlocked Version for One M7.
I knew that for doing it I would need to install some custom recovery on my phone, unlock its bootloader mode and install on my PC ADB and Fastboot. I did all of this; the bootloader unlocked I did from HTC's website guide. So, I put on my phone a ROM in zip extension, boot it on recovery mode. I read that I should wipe data, cache, calvik cache and, maybe, system. And I did it... with NO BACKUP of original ROM --' I know I was stupid...
So I wipe this partitions, entered Install menu and tried to run instalation of the ROM zip file. It didn't work!!! Some error: "E: error executing updater binary in zip..." And I tried to flash different ROMs, all of them showed this error...
Then now I am with a Soft-Bricked HTC ONE M7 which has no OS. Some pics of my status: https: // w w w .dropbox.com/s/ruyen2ikn0u5i0u/Soft-Bricked%20M7.rar?dl=0
I hope you can help me
Click to expand...
Click to collapse
post the output of "fastboot getvar all" (remove your imei and serialno)
alray said:
post the output of "fastboot getvar all" (remove your imei and serialno)
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.15.599.101
version-misc: PVT SHIP S-ON
serialno: ************
imei: ***************
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__332
battery-status: good
battery-voltage: 4322mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Could not get S-OFF
I tried getting S-OFF by Rumrunner method and didn't work :/
Hep me, guys! I really need my One back to life!!! I'm in pain :crying:
Atadie said:
I tried getting S-OFF by Rumrunner method and didn't work :/
Click to expand...
Click to collapse
You can't use rumrunner to achieve s-off on hboot 1.57, only method is Sunshine
Atadie said:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.28.3218.04
version-cpld: None
version-microp: None
version-main: 6.15.599.101
version-misc: PVT SHIP S-ON
serialno: ************
imei: ***************
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__332
battery-status: good
battery-voltage: 4322mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-6d8a0b9b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
There is not much available for 6.15.599.101 version, you'll probably need to use custom roms or convert to another version. There is a 6.15.599.101 ruu available at irfile.com but you will need an acount to download it (paid account) http://www.ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/M7_U/
Atadie said:
UPDATE: it's solved, i got back to stock rom after flashing this: https :// fl1.androidfilehost.com/dl/2k6GKx4IJOgIhD09zRzbzw/1441027324/95897840722641610/Reset_rom_6.07.1540.2.zip?
Now I'm going to do a BACKUP haha
Click to expand...
Click to collapse
This rom is for the Developer edition version CID BS_US001 and MID PN0712000, By flashing this on your phone, you're far from being stock, you will not get any ota updates and be stuck on this version.
alray said:
You can't use rumrunner to achieve s-off on hboot 1.57, only method is Sunshine
There is not much available for 6.15.599.101 version, you'll probably need to use custom roms or convert to another version. There is a 6.15.599.101 ruu available at irfile.com but you will need an acount to download it (paid account) http://www.ir-file.com/portal/index.php?dir=Firmware/HTC/HTC_Android/M7_U/
This rom is for the Developer edition version CID BS_US001 and MID PN0712000, By flashing this on your phone, you're far from being stock, you will not get any ota updates and be stuck on this version.
Click to expand...
Click to collapse
Oh, thanks :/
So, what is the best path to follow to get Lollipop? Should I pay 25 bucks for Sunshine, change my CID and try to flash correct Lollipop rom? Is there another way to get Lollipop rather that one?
Are there so many new and interesting features on Lollipop or should I stay on KitKat 4.4.3? I don't know so many custom good roms; can you recommend me some?
Sorry for asking so much questions. I know, probably I'm bothering you '-'
PS: Now my system asks for an OTA update to Lollipop, but it's not possible... Probably due to what you said about my flashed rom being Developer edition's one.
Atadie said:
Oh, thanks :/
So, what is the best path to follow to get Lollipop? Should I pay 25 bucks for Sunshine, change my CID and try to flash correct Lollipop rom? Is there another way to get Lollipop rather that one?
Click to expand...
Click to collapse
Either pay for sunshine so you can change your CID / MID to convert your phone to another version using a lollipop RUU or pay for an account at ir-file.com so you can download the .599 ruu and then take all ota updates.
Are there so many new and interesting features on Lollipop or should I stay on KitKat 4.4.3?
Click to expand...
Click to collapse
Many ppl likes lollipop and probably as many ppl doesn't like it. I think its better to try it yourself and see what you prefer. Some ppl likes the new features and other ones are complaining about battery drain and lags.
I don't know so many custom good roms; can you recommend me some?
Click to expand...
Click to collapse
All custom roms are good, it all depends what features you need. The best you can do is to read some rom threads and choose one that fit what you need, try it a few days and if not liking it, flash another one. If you want good battery life and no lag, I would recommend GPE roms, if you need what HTC Sense have to offer, then choose a Sense based rom like ARHD, Maximus, InsertCoin, NuSense ....
PS: Now my system asks for an OTA update to Lollipop, but it's not possible... Probably due to what you said about my flashed rom being Developer edition's one.
Click to expand...
Click to collapse
Because your CID and MID doesn't match the rom version you have flashed. Developer edition is for CID BS_US001 and MID PN0712000, yours is HTC__332 and PN0711000, In order to receive ota updates, you must be 100% stock either be flashing the .599 ruu for HTC__332 / PN0711000 or by achieving s-off, changing your CID / MID and flashing another version ruu e.g: changing your cid to BS_US001, your MID to PN0712000 and flashing a dev edition (.1540) RUU.
alray said:
All custom roms are good, it all depends what features you need. The best you can do is to read some rom threads and choose one that fit what you need, try it a few days and if not liking it, flash another one. If you want good battery life and no lag, I would recommend GPE roms, if you need what HTC Sense have to offer, then choose a Sense based rom like ARHD, Maximus, InsertCoin, NuSense ....
Click to expand...
Click to collapse
I was reading about Android Revolution HD, it seems good. I really like Blinkfeed (Highlights) so I guess I wouldn't flash a ROM which doesn't have it. I think ARHD got Blinkfeed, right?
Can I flash this ROM on my phone? As far as you know about my specs.