Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
audit13 said:
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
Click to expand...
Click to collapse
Hi, yes it is recognized, you mean with RSD Lite?
You can use Myth Tools or RSD lite.
audit13 said:
You can use Myth Tools or RSD lite.
Click to expand...
Click to collapse
Thanks man, I'll try
Any luck?
audit13 said:
Any luck?
Click to expand...
Click to collapse
I have not tried yet, but when I do, I tell you
audit13 said:
Any luck?
Click to expand...
Click to collapse
Tried with RSD but still doesn't work
ErickST18 said:
Tried with RSD but still doesn't work
Click to expand...
Click to collapse
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
audit13 said:
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
Click to expand...
Click to collapse
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
ErickST18 said:
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
Click to expand...
Click to collapse
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
audit13 said:
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
Click to expand...
Click to collapse
Only tried with ATT and Bell, no sucess
ErickST18 said:
Only tried with ATT and Bell, no sucess
Click to expand...
Click to collapse
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
audit13 said:
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
Click to expand...
Click to collapse
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
ErickST18 said:
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
Click to expand...
Click to collapse
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
audit13 said:
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
Click to expand...
Click to collapse
I will try, i hope so... Thanks for your time bro, i'll notice you once installed cwm.
q
ErickST18 said:
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Click to expand...
Click to collapse
Your fault repaired yet，i have the same trouble.can you help me
acecombat3 said:
Your fault repaired yet，i have the same trouble.can you help me
Click to expand...
Click to collapse
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
ErickST18 said:
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
Click to expand...
Click to collapse
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
acecombat3 said:
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
Click to expand...
Click to collapse
Sure bro, as soon as i can i will upload it and tell you how to do it. I'm on work right now. Glad to help
Related
Hi guys.
Yesterday i changed my stock rom with MoDaCo FR13 Fear Edition 6.1 27/4-11. Before doing that i root , backup and wipe the system in recovery mode. After istallation of the modaco rom i restored in recovery mode but when i reboot i got a lot of message by applications that ends their process. This happen even with another rom that i tried.
So, now i would like to restart from the beginning. How can i do that? I would like to have a clean system withouth unnecessary files and directory that now i have so i will be able to install other rom without any problems.
sndaniele said:
Hi guys.
Yesterday i changed my stock rom with MoDaCo FR13 Fear Edition 6.1 27/4-11. Before doing that i root , backup and wipe the system in recovery mode. After istallation of the modaco rom i restored in recovery mode but when i reboot i got a lot of message by applications that ends their process. This happen even with another rom that i tried.
So, now i would like to restart from the beginning. How can i do that? I would like to have a clean system withouth unnecessary files and directory that now i have so i will be able to install other rom without any problems.
Click to expand...
Click to collapse
U can flash back the original firmware that comes with your phone.
Or
Recovery and wipe your phone and flash whatever to your desire.
temasek said:
U can flash back the original firmware that comes with your phone.
Click to expand...
Click to collapse
Thanks. So I'm doing well to download this rom/firmware? http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Everything will be restored to the beginning right? Will root and recovery be lost?I don't think so, right?
sndaniele said:
Thanks. So I'm doing well to download this rom/firmware? http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Everything will be restored to the beginning right? Will root and recovery be lost?I don't think so, right?
Click to expand...
Click to collapse
Yes both root and recovery will be lost but it is easy to get root back.
I tried to install the official firmware from recovery but the result after few seconds is always: istallation aborted. WHY???? i did a wipe before!
Do you think that this guide is appropriate for my situation? http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
Will this rom restore my phone to stock situation as when i bought it?
It is more possibly your installed drivers than the firmware that causes abortion. Also it might be your PC's os. Are u on 64 bit environment?
temasek said:
It is more possibly your installed drivers than the firmware that causes abortion. Also it might be your PC's os. Are u on 64 bit environment?
Click to expand...
Click to collapse
I'm with windows 7 x64. According to you, what should i do?
sndaniele said:
I'm with windows 7 x64. According to you, what should i do?
Click to expand...
Click to collapse
I read about problems in win7 x64 in one of the threads. Can't remember where. I'm using win7 32 bit.
Either u find that post or find a way to do it on 32 bit os. Perhaps other users may have a solution for u. I have no other possible solution.
You do not have to do with the recovery, use this:
http://android.modaco.com/content/lg...5-21-20110405/
dbtomas said:
You do not have to do with the recovery, use this:
http://android.modaco.com/content/lg...5-21-20110405/
Click to expand...
Click to collapse
Hi! your link doesn't work. Is it this one? http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Should i try it?
sndaniele said:
Hi! your link doesn't work. Is it this one? http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Should i try it?
Click to expand...
Click to collapse
I did it but i still can't install this rom http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Code:
Installating update...
Installation aborted.
sndaniele said:
I did it but i still can't install this rom http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
Code:
Installating update...
Installation aborted.
Click to expand...
Click to collapse
Do not insert the battery.Installing the Rom without the battery
dbtomas said:
Do not insert the battery.Installing the Rom without the battery
Click to expand...
Click to collapse
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
sndaniele said:
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
Click to expand...
Click to collapse
You may be right are the drivers, I have XP and I had no problems, I last week I installed the rom BIN_LGP990AT-00-V10b-XXX-NEU-APR-05-2011 0.
dbtomas said:
You may be right are the drivers, I have XP and I had no problems, I last week I installed the rom BIN_LGP990AT-00-V10b-XXX-NEU-APR-05-2011 0.
Click to expand...
Click to collapse
Could you link me that rom? I'm thinking to try to do it on xp.
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
sndaniele said:
Could you link me that rom? I'm thinking to try to do it on xp.
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110405/
Click to expand...
Click to collapse
http://www.fileserve.com/file/WX7rBDs/BIN_LGP990AT-00-V10b-NEU-XXX-APR-05-2011+0.zip
http://forum.xda-developers.com/showthread.php?p=12890619#post12890619
sndaniele said:
I tried. It's the same thing. Damn! I don't know how is possible that i cannot returtn to stock rom. I hear about driver problem...could is it? i use windows windows 7 x64.
Click to expand...
Click to collapse
If u intend to use xp then use the original firmwares in the earlier post which u did unsuccessfully in win7 x64. U should be fine.
Good Luck.
temasek said:
If u intend to use xp then use the original firmwares in the earlier post which u did unsuccessfully in win7 x64. U should be fine.
Good Luck.
Click to expand...
Click to collapse
I'm trying it. I will let you know...cross your fingers for me! ehehe
Guys...i'm guessing...i'm trying to install the firmware from recovery and choosing the zip file in which there are the .bin and .fls files. Is it correct right?
"FIRMWARE TEAM" Presents:
AT&T ICS 4.0.4
7.7.1Q-144_MB886_MR1-22_SIGNED_CFC.xml.zip
Upload by Skrilax_CZ, Download Coming Soon in http://sbf.droid-developers.org/dinara/list.php
Upload by daywalker04, Download Coming Soon in http://forum.xda-developers.com/showthread.php?t=1853522
Live: http://sbf.droid-developers.org/dinara/list.php
Just got my first Motorola with this phone, but think I borked it by messing with the radio bands. How does one flash these .xml or .sbf files to restore to original stock?
failed flashing process..unknown fastboot comand
I'm grabbing this for my friend, he can't get the update because he needs Wi-Fi and the phone won't connect to our University's Wi-Fi network. This won't break OTA for him though will it?
It's just as same as if you have applied OTA.
what is the update process?
Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?
aerohp said:
so what exactly is the update procedure?
Here's what my phone is showing me.
system version: 77.1.7.MB886.ATT.en.US
android version: 4.0.3
Will this update change anything with the bootloader or anything like that?
Click to expand...
Click to collapse
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.
Skrilax_CZ said:
It's just as same as if you have applied OTA.
Click to expand...
Click to collapse
popfan said:
If you got 4.0.3 we need a copy of your OS before you upgrade. 4.0.3 has vulnerabilities that we need to get root. Sorry I don't know the procedure, but I am sure some dev will be more than willing to tell you.
Click to expand...
Click to collapse
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.
aerohp said:
are there any specifics to the vulnerabilities?
anyways, if someone lets me know how make a copy of the OS, i'd be more than willing to do so.
Click to expand...
Click to collapse
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.
mattlgroff said:
Just saw this and need to let you know not to do any soft of fastboot or updating without backing up your files. The worry is you flash a retail bootloader and possibly cannot go back if you use these.
Click to expand...
Click to collapse
yeah, that's why i'm holding out... battery life sucks on the 4.0.3. it barely gets me 8-9 hours with moderate use. i've noticed there are huge drops in the battery level every now and then. i guess i'll just deal with it until we get the root thing sorted out.
is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks
mrvirginia said:
is there a way to just mount the system.img.ext4? i've tried ext2explore and i've tried to mount it with Linux Reader. thanks
Click to expand...
Click to collapse
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?
aerohp said:
i'm wondering the same thing...i'm not flashing this on my phone but a friend of mine has a retail 4.0.4 and can't get the OTA. i;m not really sure how to flash this. i was hoping for it to be an sbf but thats not the case. can someone point the way please?
Click to expand...
Click to collapse
just use fastboot oem fb_mode_set
then fastboot flash .......
cmvienneau said:
just use fastboot oem fb_mode_set
then fastboot flash .......
Click to expand...
Click to collapse
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.
darknessrise1234 said:
Flash what exactly? I've been trying this for the past hour and rsdlite won't work, moto-fastboot doesn't give any hints. I've tried MR1-22 and FFW-14.
Click to expand...
Click to collapse
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip
mandrsn1 said:
Edit the XML file within the ZIP. Remove the two lines that contain "GETVAR". then flash the zip
Click to expand...
Click to collapse
After removing that, the modem lines and the oem_mode_set one... It still fails on the system.img.ext4.
EDIT: Out of thoughts. Stuck with a fastboot loop. Won't even allow me to turn it off.
I installed beats installer and my phone will not reboot. Any Ideas?
tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...
Av8tor86 said:
tried the same thing, now stuck at the boot animation. I have tried factory reset as well as downloading the firmware and trying to update from the sd card in recovery. No luck. It is now a brick unless someone can help...
Click to expand...
Click to collapse
This sucks, I have no idea what could have happened. I really hope someone can help!!
How it got bricked:
I managed to install root, but then I tried to flash the custom recovery, when I restarted the phone, It got stuck at boot logo.
I can still get into the stock recovery, I can use adb shell and see the filesystem. I was using 4.1.2, I think I might need to flash again the stock rom, but I don't know how. Can anyone help please?
http://forum.xda-developers.com/showthread.php?t=2069723
Dadovvv said:
http://forum.xda-developers.com/showthread.php?t=2069723
Click to expand...
Click to collapse
How do I know which KDZ file to flash? Or any of the latest should suffice?
Soy_Filipo said:
How do I know which KDZ file to flash? Or any of the latest should suffice?
Click to expand...
Click to collapse
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
Dadovvv said:
http://www.smartphenom.com/2013/01/lg-firmware-update-central-beta.html
Click to expand...
Click to collapse
I'm sorry if I'm asking something terribly obvious, but I've bought my phone in amazon and neither my country or carrier are listed there, so, I don't know what to flash, will it break my phone if I flash something wrong? I would like to flash something from spain so I can use my native language
Soy_Filipo said:
I'm sorry if I'm asking something terribly obvious, but I've bought my phone in amazon and neither my country or carrier are listed there, so, I don't know what to flash, will it break my phone if I flash something wrong? I would like to flash something from spain so I can use my native language
Click to expand...
Click to collapse
U can flash each version of kdz file you want.
I can only get into de SW Upgrade mode when I plug the phone with the battery on it, Is it really important to do it with the battery off?
Soy_Filipo said:
I can only get into de SW Upgrade mode when I plug the phone with the battery on it, Is it really important to do it with the battery off?
Click to expand...
Click to collapse
you can do it with battery on no problem
i ahve tried to install a custom rom but it didnt flash properly, and i tried to do a restore of my stock rom but its not on my phone anymore all i can do is put the phone into bootloader and recovery, i have my stock rom backed up on my pc, but i cant find a way of getting my pc to recognise the phone to enable me to get the stock rom installed, my 400pound htc one might as well be a paperweight at this rate!!
surly there is a way i can get acess to the internal sd card??
Search for: adb sideload
BenPope said:
Search for: adb sideload
Click to expand...
Click to collapse
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
nottys4 said:
will that work even tho i only have acess to boot loader and recovery?
also will i loose root?
Click to expand...
Click to collapse
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
BenPope said:
It depends on the recovery, but it works in TWRP.
It is the ROM that is rooted, so if you sideload a non-rooted ROM and flash it, you will lose root. It seems you don't have a working ROM, so you don't "have" root.
Click to expand...
Click to collapse
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
any suggestions
Click to expand...
Click to collapse
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
BenPope said:
Let me correct you. You had a custom ROM that was rooted.
My suggestion is to fix the problem.
I can't help you because:
1) I don't know what recovery you have
2) I don't know what tutorial you followed
3) I don't know in which way it is "not working"
I suggest you flash TWRP 2.6.3.4 and use adb sideload.
Click to expand...
Click to collapse
i have twrp 2.6.3.3
http://forum.xda-developers.com/showthread.php?t=2559200
thats the tutorial
it wont load any rom says it cant read the rom
Post your commands which you used to copy files
sent from my mobile device
SaHiLzZ said:
Post your commands which you used to copy files
sent from my mobile device
Click to expand...
Click to collapse
all the commands that i sent are in the tutoruial that i shared
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
bored_stupid said:
Get hold of a OTG cable. Put the ROM from the PC onto a USB stick and then flash it through your recovery using the OTG cable
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
nottys4 said:
i am completly stuck!!!!! is someone willing to connect to me via skype and help me out as i need my phone bacl on asap and dont know how to do it!!!
Click to expand...
Click to collapse
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
mb_guy said:
You need to get adb working on your PC or you could try what bored_stupid is suggesting. You are a long why from requiring supersu at this point.
Click to expand...
Click to collapse
are you able to have a chat with me on skype please and explain this in more detail, i've done so much in the past few days i dont even know where i am anymore
nottys4 said:
i had root and a custom rom on my phone but i reflashed a differnt rom and it wouldnt load only to realise i didnt have the working rom on my phone, ive tried adb side load and its not working, i followed the tutorial step by step???
Click to expand...
Click to collapse
Try to be more precise! Which rom are your trying to flash? Give a link!
nottys4 said:
all the commands that i sent are in the tutoruial that i shared
Click to expand...
Click to collapse
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
nottys4 said:
fanstastic idea but i need my phone to be able to boot back up to install super su and it cant because i dont have a rom installed on it, any idea of where i can get a stock unrooted rom from my m7 international?
Click to expand...
Click to collapse
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
alray said:
Try to be more precise! Which rom are your trying to flash? Give a link!
If you have posted a screenshot of your cmd prompt maybe we could pinpoint why its failing.
You don't even have a working rom so why are you still talking about root??? You don't need root to use a usb otg cable to flash a rom.
Make sure you have the latest android sdk installed on your computer and latest htc drivers.
Post the output of fastboot getvar all minus imei/sn
Click to expand...
Click to collapse
many thanks guys for your help i managed to get my phone back online again!! but i now have another problem...
hi there after completely messing my phone up i managed to get this rom back on and working!! but my phone gives this error message:
There was a problem communicating with google servers.
try again later.
does anyone know why this is??
anybody else having issues with thier google account??
nottys4 said:
anybody else having issues with thier google account??
Click to expand...
Click to collapse
It is problem globally! Google is experiencing major error with sync servers.
or try this: go to accounts.google.com and in security (left panel) go to the list of 3rd party applications that are using your Google credentials and start revoking the applications that you no longer use.
Softor4pda said:
It is problem globally! Google is experiencing major error with sync servers.
Click to expand...
Click to collapse
bugger!!! i really wanna get my phone set up too, any ideas of how long they will be down?
Hello guys!
I wanted to upgrade to Malladus Kitkat 4.4.2. I was on 12b with CWM...So i updated my recovery to TWRP from here ... I followed the steps and still it wouldnt let me install the ROM. Kept saying update failed. So I tried going back to CWM, that update too failed...So I was stuck with TWRP..So i installed 12b and after a while the phone finished everything and rebooted..But it went into a bootloop..I tried going into recovery using power and vol down option...when I got the option to hard reset..i pressed power thrice...usually it would go to the recovery but now the hard reset was done in less than a second and the phone shut down...did this a few times with the same result. My PC (win 8) does not recognize my device since its not yet on..Also it keeps asking me if I want to format my drive. The drivers have been installed etc. I dont know what to do...How do i revive it? Any help will be massively appreciated guys
Can you get into Download mode?
IamPro said:
Can you get into Download mode?
Click to expand...
Click to collapse
Yes I can but the PC does not recognize it
If only there was a help forum that would answer your questions.....
hhhmmmmm....http://forum.xda-developers.com/verizon-g2/help
BRICK
Look up LG Flash Tool for i was able to unbrick and restore my phone.
Note you will loose everything after this but if you items where backed up you can restore them.
Good Luck!
androidmaniac123 said:
Hello guys!
I wanted to upgrade to Malladus Kitkat 4.4.2. I was on 12b with CWM...So i updated my recovery to TWRP from here ... I followed the steps and still it wouldnt let me install the ROM. Kept saying update failed. So I tried going back to CWM, that update too failed...So I was stuck with TWRP..So i installed 12b and after a while the phone finished everything and rebooted..But it went into a bootloop..I tried going into recovery using power and vol down option...when I got the option to hard reset..i pressed power thrice...usually it would go to the recovery but now the hard reset was done in less than a second and the phone shut down...did this a few times with the same result. My PC (win 8) does not recognize my device since its not yet on..Also it keeps asking me if I want to format my drive. The drivers have been installed etc. I dont know what to do...How do i revive it? Any help will be massively appreciated guys
Click to expand...
Click to collapse
burkett375 said:
If only there was a help forum that would answer your questions.....
hhhmmmmm....http://forum.xda-developers.com/verizon-g2/help
Click to expand...
Click to collapse
Of course I tried some of the options mentioned in that forum but my PC simply fails to recognize the phone.. so even in the Download mode, I am unable to do anything. Let me try the method which requires me to use Ubuntu. May be it will work.
Setting com port to 41?
Sent from my VS980 4G using Tapatalk
MasterJerky said:
Look up LG Flash Tool for i was able to unbrick and restore my phone.
Note you will loose everything after this but if you items where backed up you can restore them.
Good Luck!
Click to expand...
Click to collapse
Will try today Sir...thank you :good:
garywojdan81 said:
Setting com port to 41?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Oh i didnt know about that...Will try it that way too...thank you.
garywojdan81 said:
Setting com port to 41?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
It worked
Thank you sir!:good:
androidmaniac123 said:
It worked
Thank you sir!:good:
Click to expand...
Click to collapse
Glad to hear you got it going ?
Sent from my VS980 4G using Tapatalk
MasterJerky said:
Look up LG Flash Tool for i was able to unbrick and restore my phone.
Note you will loose everything after this but if you items where backed up you can restore them.
Good Luck!
Click to expand...
Click to collapse
Worked like a charm :good: