Database Develop

[TUTORIAL][TX,V,T] "How to root and install cwm 4.3 Leaked Version"

Hi Advance Users
here is my tutorial
Requirements:
1.CWM v8 (v9 is too buggy cant install anything) https://www.androidfilehost.com/?fid=23269279319202183
2.UPDATED ROOT :http://download.chainfire.eu/376/SuperSU/UPDATE-SuperSU-v1.89.zip
3.Working CWM or any recovery
Flash Leaked ROM
Flash Root
Then Flash CWM v8
Turn off
Flash kernel from the leaked rom zip via fastboot
Reboot!!
Then cheers!!! your phone is rooted with cwm installed
Dont Forget to Give "Thanks"

i see the leaked Rom has no CWM installed.
so how could i flash the ROOT zip ??
im stuck, Jai

Use a kernel with cwm already, such nk or cm based. Then directly flash JB kernel afterwards. But flashing root and cwm before booting the room is more convenient as op instructed. Great.
Sent from my LT25i using XDA Premium 4 mobile app

ydaud said:
Use a kernel with cwm already, such nk or cm based. Then directly flash JB kernel afterwards. But flashing root and cwm before booting the room is more convenient as op instructed. Great.
Sent from my LT25i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank man! Its worked

its very useful

JyRo said:
Flash kernel from the leaked rom zip via fastboot
Click to expand...
Click to collapse
You don't have to do this, since the ROM's zip flashes the kernel too

paxy97 said:
You don't have to do this, since the ROM's zip flashes the kernel too
Click to expand...
Click to collapse
Yes...but not any kernel wont work with 4.3 version.

ok so i tried this 10000 times with your JyrROM version of the ROM and it just wouldnt work...
is there no way to root that ROM???

doenen said:
ok so i tried this 10000 times with your JyrROM version of the ROM and it just wouldnt work...
is there no way to root that ROM???
Click to expand...
Click to collapse
but mine worked fine. what I did is flash the ROM(JyROM), flashed SuperSU v1.91 and it is done!

shadowhunter20 said:
but mine worked fine. what I did is flash the ROM(JyROM), flashed SuperSU v1.91 and it is done!
Click to expand...
Click to collapse
After this, do u have working super SU and CWM!?!?!?!?!?!

doenen said:
After this, do u have working super SU and CWM!?!?!?!?!?!
Click to expand...
Click to collapse
Super SU is working fine but since JyROM don't have CWM in it, I just installed CWM again, I installed the v6 of CWM..

shadowhunter20 said:
Super SU is working fine but since JyROM don't have CWM in it, I just installed CWM again, I installed the v6 of CWM..
Click to expand...
Click to collapse
yeah...well it didnt work that way for me and i think i will wait till official JB 4.3 is out. i hope jyro will make another version of his ROM i really liked the strong "debloation" and the opimization for battery life...

root works but i can't use xposed it's impossible to reboot and install it...

francescohtc said:
root works but i can't use xposed it's impossible to reboot and install it...
Click to expand...
Click to collapse
You can use this for xposed.
http://forum.xda-developers.com/showthread.php?t=

Pangkoy08 said:
You can use this for xposed.
http://forum.xda-developers.com/showthread.php?t=
Click to expand...
Click to collapse
link is not valid... :crying:
EDIT:
Solved installing this: http://forum.xda-developers.com/showpost.php?p=48484642&postcount=6846

[Q] CyanogenMod 11 for GT-I8190N

Hi Everyone.
So I was wondering if there's a version of CM11 for the GT-I8190(N) . I've been struggling to get it and I couldnt find any threads that were helpful. I'm desperate for CM11 because I've been using stock Touchwiz 4.1.2 for such a long time and I miss CM which I've used on my S2 (GT-I9100G) Also if there's any root solutions and confirmations please let me know.
What I really need:
-CM11 for GT-I8190(N)
-Root for the device ^
-Custom recovery ^
If that's not too much to ask.
Thank for for reading and noticing this thread, if you have any solutions or answers to the above question please reply.
Thanks again,
-Alysha.

alyxr_ said:
Hi Everyone.
So I was wondering if there's a version of CM11 for the GT-I8190(N) . I've been struggling to get it and I couldnt find any threads that were helpful. I'm desperate for CM11 because I've been using stock Touchwiz 4.1.2 for such a long time and I miss CM which I've used on my S2 (GT-I9100G) Also if there's any root solutions and confirmations please let me know.
What I really need:
-CM11 for GT-I8190(N)
-Root for the device ^
-Custom recovery ^
If that's not too much to ask.
Thank for for reading and noticing this thread, if you have any solutions or answers to the above question please reply.
Thanks again,
-Alysha.
Click to expand...
Click to collapse
First you need a custom recovery : http://goo.im/devs/Darkman/Recoverys/Recovery-CWM-I8190-Official-6.0.2.7.ODIN.zip (CWM)
Chainfire SuperSU zip : http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip flash it via recovery
CyranogenMod 11 by Novafusion.pl : novafusion.pl or xda thread http://forum.xda-developers.com/showthread.php?t=2521593
Note : from NovaFusion Team you can also get the TWRP recovery (if you like TWRP more than CWM)

xXPR0T0TYPEXx said:
First you need a custom recovery : http://goo.im/devs/Darkman/Recoverys/Recovery-CWM-I8190-Official-6.0.2.7.ODIN.zip (CWM)
Chainfire SuperSU zip : http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip flash it via recovery
CyranogenMod 11 by Novafusion.pl : novafusion.pl or xda thread http://forum.xda-developers.com/showthread.php?t=2521593
Note : from NovaFusion Team you can also get the TWRP recovery (if you like TWRP more than CWM)
Click to expand...
Click to collapse
By means it'd actually work?

Use latest twrp recovery or philz recovery.
Rom works for i8190Ń, but without NFC feature.
Sent through time and space from my s3mini/CM11

tys0n said:
Use latest twrp recovery or philz recovery.
Rom works for i8190Ń, but without NFC feature.
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It'll work? I've spent days worrying about the 'n' thing. NFC isnt useful anyway. Thank You so much!

alyxr_ said:
It'll work? I've spent days worrying about the 'n' thing. NFC isnt useful anyway. Thank You so much!
Click to expand...
Click to collapse
try flash cm11 odin version

hardi7690 said:
try flash cm11 odin version
Click to expand...
Click to collapse
What about the recovery and root?

alyxr_ said:
What about the recovery and root?
Click to expand...
Click to collapse
cm11 odin version it came with twrp recovery and rooted. so you no need to root or flash recovery bevore it.

Got it to work anyway. Thanks
Sent from my GT-I8190 using XDA Free mobile app

HI guys
>>>> 4.2.1 jellybean S3 mini I8190N
I tried flashing cynaogen 10 but it failed.....is there any other version i can try for this particular phone?? or do i have to upgrade android for the other versions>

About Recovery

Hi guys, i want to know what is the last recovery or updated. I mean i get sometimes "Status 7" while installing Kit kat roms, i think it is because the CWM version, im on CWM 6.0.4.4. Hope you can help me

ErickST18 said:
Hi guys, i want to know what is the last recovery or updated. I mean i get sometimes "Status 7" while installing Kit kat roms, i think it is because the CWM version, im on CWM 6.0.4.4. Hope you can help me
Click to expand...
Click to collapse
Which ROMs are you trying to flash? I believe CWM 6.0.4.4 is the most recent version.

ErickST18 said:
Hi guys, i want to know what is the last recovery or updated. I mean i get sometimes "Status 7" while installing Kit kat roms, i think it is because the CWM version, im on CWM 6.0.4.4. Hope you can help me
Click to expand...
Click to collapse
Why don't you try Philz recovery? I think It's the best for me and most people use it, lol

audit13 said:
Which ROMs are you trying to flash? I believe CWM 6.0.4.4 is the most recent version.
Click to expand...
Click to collapse
Im trying with Mokee 4.4.4 Release from 14-06-23

ErickST18 said:
Im trying with Mokee 4.4.4 Release from 14-06-23
Click to expand...
Click to collapse
I have never tried to install that ROM but I have had no problems with Carbon, Validus, or AOSB using 6.0.4.4.

TWRP for I9070

Hey guys,
Coming back to S advance forums after a long time.
Currently i'm running rooted Vanir AOSP 4.4.4 with CWM recovery.
Now i want ask about getting TWRP on this Galaxy S Advance? Any threads on which you can guide me? Any help would ne appreciated.
Thanks

ssbnasa said:
Hey guys,
Coming back to S advance forums after a long time.
Currently i'm running rooted Vanir AOSP 4.4.4 with CWM recovery.
Now i want ask about getting TWRP on this Galaxy S Advance? Any threads on which you can guide me? Any help would ne appreciated.
Thanks
Click to expand...
Click to collapse
If there is no kernel for Vanir with TWRP embedded, you can't use it. Custom recovery is embedded in same partition as kernel, so it can't be installed separately.

shut_down said:
If there is no kernel for Vanir with TWRP embedded, you can't use it. Custom recovery is embedded in same partition as kernel, so it can't be installed separately.
Click to expand...
Click to collapse
Thanks for the help. But that means TWRP will only embedded come with a kernel?
If yes, then can u guide me towards any kitkat kernels in which TWRP is embedded?
Thanks!

ssbnasa said:
Thanks for the help. But that means TWRP will only embedded come with a kernel?
If yes, then can u guide me towards any kitkat kernels in which TWRP is embedded?
Thanks!
Click to expand...
Click to collapse
Exacly, TWRP will only embedded come with a kernel. I am not sure what kernel is compatible with Vanir AOSP, that has TWRP. You might look for ROM that has kernel with TWRP, and flash it with Universal Kernel Flasher. And be prepared to recover phone if you end up with a bootloop (flash same rom again if you can access recovery, or flash stock firmware).

shut_down said:
Exacly, TWRP will only embedded come with a kernel. I am not sure what kernel is compatible with Vanir AOSP, that has TWRP. You might look for ROM that has kernel with TWRP, and flash it with Universal Kernel Flasher. And be prepared to recover phone if you end up with a bootloop (flash same rom again if you can access recovery, or flash stock firmware).
Click to expand...
Click to collapse
Yea Yea i know the drill!
And i might be changing roms then, trying all those which has TWRP embedded in it.
Last help pls? Can u suggest some roms which has TWRP in it?
Thanks a lot for help!

ssbnasa said:
Yea Yea i know the drill!
And i might be changing roms then, trying all those which has TWRP embedded in it.
Last help pls? Can u suggest some roms which has TWRP in it?
Thanks a lot for help!
Click to expand...
Click to collapse
You do not need to change it to find it, it is written in its post. I think that Omni has TWRP, and maybe Carbon. Ofcourse it needs to be 4.4 based. Look in Original Development and in Development section of our device part of this forum.

shut_down said:
You do not need to change it to find it, it is written in its post. I think that Omni has TWRP, and maybe Carbon. Ofcourse it needs to be 4.4 based. Look in Original Development and in Development section of our device part of this forum.
Click to expand...
Click to collapse
Thank you man, appreciate your help!

shut_down said:
You do not need to change it to find it, it is written in its post. I think that Omni has TWRP, and maybe Carbon. Ofcourse it needs to be 4.4 based. Look in Original Development and in Development section of our device part of this forum.
Click to expand...
Click to collapse
ssbnasa said:
Thank you man, appreciate your help!
Click to expand...
Click to collapse
Carbon has CWM, but SlimKat has TWRP.

[TWRP][E6653/E6603/E6633/E6683] 3.0.2 , all Marshmallow (Android 6.0) ROMs

Hi guys,
just finished building TWRP 3.0.2-0 for the Z5
Download
TWRP-for-CM (folder)
recovery_3.0.2.img (fastboot flashable file)
Source:
https://github.com/omnirom/android_bootable_recovery (TWRP, recovery - place in bootable/recovery-twrp)
https://github.com/CyanogenMod (CyanogenMod source)
https://github.com/Sony-Kitakami (place in .repo/local_manifests )
Build:
Code:
source build/envsetup.sh
lunch cm_sumire-userdebug
mka clobber && mka recoveryimage RECOVERY_VARIANT=twrp
Thanks to @moonbutt74 for bearing with me and all my questions :silly:

Not Working on E6633 , When I power on the device , Sony logo show and the device power off immediately
Edit :
It works Successfully , I had flashed It as a kernel hahaha
Thank You ^_^

Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx

Sh4douw said:
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Click to expand...
Click to collapse
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully

Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)

Sh4douw said:
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Click to expand...
Click to collapse
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem

Sony guy said:
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Click to expand...
Click to collapse
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD

Sh4douw said:
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Click to expand...
Click to collapse
Click here to download the rom
http://forum.xda-developers.com/xperia-z5/development/rom-cyanogenmod-13-sony-xperia-z5-t3356163/page11
And Gapps you can find it in the first page of the above thread

Okay, I don't understand why, but for booting on CM, I had to reflash the kernel !
Without it, my device power off one second after the Sony logo
It finally works, thanks you

Hi,
Are you able to make one for the Z5P??
some of us are still stuck at ver 2.8.
also, i have used your root kernel program with the lastest twrp and it can boot into recovery,since i am using a custom kernel, i think it will be nice if there is a flashable img file for the latest twrp.
Many thanks in advance.

Will this work with my new Z5, Android 6.0.1, totally stock?

Nayibmc said:
Will this work with my new Z5, Android 6.0.1, totally stock?
Click to expand...
Click to collapse
No. Just Cm/Aosp
Sent from my Xperia Z5 using XDA-Developers mobile app

How can amplify the sound in Bluetooth?

Sergeyra29 said:
How can amplify the sound in Bluetooth?
Click to expand...
Click to collapse
Faux sound setting in Kernel Adiutor is not working(im on Z5 RR latest build plus Zach's kernel), but it working on Romaur 4.2.0 plus Aur-kernel 4.0.
try "FauxSound app v1.5" from play store, its worked with wired headset, maybe worked with Bluetooth too.
Sent from my Xperia Z5 using XDA-Developers mobile app

How can amplify the sound in Bluetooth mixer_paths?

Sorry wrong reply. XD

Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you

adize said:
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
Click to expand...
Click to collapse
1 - fastboot flash recovery x.img
2 - I think this recovery is for CM ROM
You can search in the android development section for stock ROM , it works on all firmwares

Hi guys, noob question here: I have twrp old version, can I flash this in recovery?
And also I want to try the xz rom but tried flashing and didn't work, it is my understanding that it was caused by the old twrp and using this I'll be able to use that rom.
Thank you for your help.
Sent from my E6653 using XDA-Developers mobile app
[emoji41]

oh, sorry, wrong thread