{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This a guide to unlock your bootloader on a Huawei Ascend P7-L10.
After a long search on the web i finaly found a way to do this .
This will also remove T-Mobile apps an bootimage (JUNK) from your phone.:victory:
1. Download the .zip file (B121): https://mega.co.nz/#!j8ZyjBQL!6SH2_Yd44B0vfOKX3WhqCkvhJ4fX-AIows0vCNQtX44
or download the B126 her http://dl.huaweinews.com/Roms/Ascend-P7/HUAWEI%20P7-L10%20V100R001C00B126.zip
2. Unpack the zip file.
3. Copy the "dload" map to the root of you phone.
4. Go to settings -> Updates -> Systemupdates -> Local update.
5. Back-up your phone and Install the update and you phone will have a unlocked bootloader:victory:
After this you can easly install TWRP on you Huawei Ascend P7-L10, so you dont have to ROOT your phone with some chinees root program.
Link to the TWRP threath: http://forum.xda-developers.com/ascend-p6/orig-development/recovery-t2811965
Can you add little more information It's because B121 and B126 have already unlocked bootloader, so it doesn't matter which one you use to update Those are both official firmwares so if you brick your phone updating with B121 or B126 warranty should cover it. Someone wiser can correct me if there is wrong info
RICKROCKER said:
Can you add little more information It's because B121 and B126 have already unlocked bootloader, so it's doesn't matter which one you use to update Those are both official firmwares so if you brick your phone updating with B121 or B126 warranty should cover it. Someone wiser can correct me if there is wrong info
Click to expand...
Click to collapse
No you'r totaly right .
Thanks for this.
The reason i making this threath is that there was none on this forum .
RICKROCKER said:
Can you add little more information It's because B121 and B126 have already unlocked bootloader, so it doesn't matter which one you use to update Those are both official firmwares so if you brick your phone updating with B121 or B126 warranty should cover it. Someone wiser can correct me if there is wrong info
Click to expand...
Click to collapse
Most of the T-mobile users have a locked phone (like me), and this way will remove al T-mobile stuff and your locked bootloader.:victory:
Is there any way to get all "bloat ware" and locked BL from "t-mobile" back ? is it simple like i think just needed to pick up original upddate.app in DLOAD from t-mobile ? (it names update.app on G300 i think this will be same)
I didnt have phone right now but its on the way this week will come, i want all information about it.
Thanks.
I realy dont know. Maybe someone els can help you with this.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
cumilko said:
Is there any way to get all "bloat ware" and locked BL from "t-mobile" back ? is it simple like i think just needed to pick up original upddate.app in DLOAD from t-mobile ? (it names update.app on G300 i think this will be same)
I didnt have phone right now but its on the way this week will come, i want all information about it.
Thanks.
Click to expand...
Click to collapse
Hi! If you flash original firmware (update app) it will lock bootloader (some of the firmwares have already unlocked bootloader) And yes, the update.app will also intstall all apps back.
[email protected]
http://forum.xda-developers.com/showthread.php?p=54719981
You cant unlock the bootloader by flashing a new or old Rom. Ive checked that on two huawei P7 L10.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
87insane said:
[email protected]
http://forum.xda-developers.com/showthread.php?p=54719981
You cant unlock the bootloader by flashing a new or old Rom. Ive checked that on two huawei P7 L10.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Thats also my threath.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
By doing OTA-Updates unlocked bootloader und root was kept with my P7-L00 up to the latest OTA-Update Build 123.
yordy said:
Thats also my threath.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Whats happend?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
87insane said:
Whats happend?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
Nothing happend.
I found it out on my own and have made a threath for it so everyone can do it.
MSprecher said:
By doing OTA-Updates unlocked bootloader und root was kept with my P7-L00 up to the latest OTA-Update Build 123.
Click to expand...
Click to collapse
Hi Guy!
I have the phone as yours and I am completely disappointed ! (I am an Android new users, previously on iOS)...
I have also p7 L00 from china. Is there any way to get the european version of the system (without all the chinese configuration?)
thanks!
Kynesis95 said:
Hi Guy!
I have the phone as yours and I am completely disappointed ! (I am an Android new users, previously on iOS)...
I have also p7 L00 from china. Is there any way to get the european version of the system (without all the chinese configuration?)
thanks!
Click to expand...
Click to collapse
It is a multilanguage ROM.
After installing in your language it is up to you to remove the chinese apps. You can do so after rooting the phone with different apps from the market.
Good luck!
MSprecher said:
It is a multilanguage ROM.
After installing in your language it is up to you to remove the chinese apps. You can do so after rooting the phone with different apps from the market.
Good luck!
Click to expand...
Click to collapse
Can you please advice which apps root this phone?
I have L00 version also, can you tell me how you root yours?
Thanks
djshorty said:
Can you please advice which apps root this phone?
I have L00 version also, can you tell me how you root yours?
Thanks
Click to expand...
Click to collapse
First I flashed the firmware with unlocked bootloader, e.g. P7-L00_EMUI_2.3_V100R001C17B121SP01
Put the "update.app" to "dload" folder , then save the folder to SD card (external storage)
Power off the phone, then press the power button ,volume up and down together ,and hold them until the phone starts updating the Firmware
Install the Hisuite software to your Computer
Connect the phone with the computer and have it install the Hisuite-drivers to the phone until there is a Hisuite-connection between the phone and the computer.
From your comupter root the phone with the RootGenius-Tool 1.9.6, this ends in rebooting the phone.
Set up the phone.
From then on have the phone doing the OTA-Updates to the latest firmware.
This worked for me.
If you do, you will do it at your own risk!
I am not responsible If you brick your phone.
Good luck
Matthias
MSprecher said:
First I flashed the firmware with unlocked bootloader, e.g. P7-L00_EMUI_2.3_V100R001C17B121SP01
Put the "update.app" to "dload" folder , then save the folder to SD card (external storage)
Power off the phone, then press the power button ,volume up and down together ,and hold them until the phone starts updating the Firmware
Install the Hisuite software to your Computer
Connect the phone with the computer and have it install the Hisuite-drivers to the phone until there is a Hisuite-connection between the phone and the computer.
From your comupter root the phone with the RootGenius-Tool 1.9.6, this ends in rebooting the phone.
Set up the phone.
From then on have the phone doing the OTA-Updates to the latest firmware.
This worked for me.
If you do, you will do it at your own risk!
I am not responsible If you brick your phone.
Good luck
Matthias
Click to expand...
Click to collapse
Hi guys,
I repeat it - Firmware flash dont unlock the bootloader.
But if you use a root tool like vroot thats unlock and root your phone.
See yordy's or my post in this thread.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Hello i have currently p7-L10 / B133sp01 to be opened to the bootloader? There is a possibility? The first comment is not included in this version! Thanks
Tapatalk-kal küldve az én HUAWEI P7-L10-el
szunyi77 said:
Hello i have currently p7-L10 / B133sp01 to be opened to the bootloader? There is a possibility? The first comment is not included in this version! Thanks
Tapatalk-kal küldve az én HUAWEI P7-L10-el
Click to expand...
Click to collapse
Hi,
Is no problem.... The same way
Sent from my HUAWEI P7-L10 using XDA Free mobile app
How do I know ??
How do I know if my p-7 has the unblocked bootloader???? Where can I check this ???
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We get many emails per day from our readers asking about the EMUI 3.0 firmware release for the Ascend P7-L10. Ascend P7 Chinese variants got a development EMUI 3.0 firmware almost 2 months ago but the international Ascend P7 L10 version was left out from getting updates until now. Waiting period is over now because Huawei German division is running an Ascend P7 EMUI 3.0 firmware beta testing program and thanks to that we have got a beta EMUI 3.0 release for the P7 L10.
There are 2 ways to get the beta EMUI 3.0 firmware up and running on your Ascend P7. Easiest way is to sign up for the beta testing program and wait until your Ascend P7 receives the OTA update. Other method is downloading and installing the OTA update directly on your phone. However both methods require your Ascend P7 to be running the B133 firmware prior installing the beta EMUI 3.0 firmware which is numbered as B602. If you have any other firmware running on your Ascend P7 you won’t be able to install the B602 update.
Even though the B602 firmware update is categorized as a beta firmware, users reported that to be very stable and almost bug free. You applications and settings might be preserved when you upgrade from B133 but we recommend you to do a factory reset before the upgrade just to make sure everything runs smoothly after the upgrade.
If you don’t have B133 already installed on your device, You can download it directly from Huawei by clicking here – http://goo.gl/y1S0p6
Like we said, there are 2 ways to get this new B602 firmware up and running on your P7
1. Install B133 on your P7 and sign up to the beta testing program right here – http://goo.gl/RsSWjp
You might have to wait few days to receive the update this way. But its the easiest method if you are already running B133 by default and don’t have time to mess with the manual updates.
2. Download the B602 update from the internet and install it manually over the B133 firmware. You can download the B602 EMUI 3.0 firmware update from here – http://goo.gl/Buqw9f
Here are the details of this new B602 firmware,
Model – Huawei Ascend P7-L10
Region – Europe
Firmware version – B602 Beta
Android version – 4.4.2
EMUI version – 3.0
Google Apps included – Yes
Languages included – English,German,..
Release date – December 10, 2014
File size – 611MB (direct download size)
If you install this firmware update on your P7 please let us and the other readers know about your thoughts by using the comments below.
http://huaweinews.com/2014/12/ascend-p7-b602-emui-3/#prettyPhoto
Thank you for your article, what is the theme of your pictures ? that you use
these pics are mine
and its just the new emui 3.0 design with its own designs (mixed together)
Guys I have installed EMUI 3.0 over B133SP03 what do you think ?
does it work simona?
guys can u pls provide original recovery from 602 ?
you can do it on your own:
extract the update.zip on your pc (best with 7.zip)..
then inside this you see an update.app - copy this to another folder..
rename the copied update.app into update.zip..
open this zip - inside is another update.app - extract this too..
then open huaweiupdateextractor..load the last extracted update.app and get the recovery.img from it..
i tested this and it works..my phone booted after flashing this recovery (i tried to root by twrp 2.8.1.0) normal and without issues..
blueIBI said:
these pics are mine
and its just the new emui 3.0 design with its own designs (mixed together)
Click to expand...
Click to collapse
Can i use it ?
blueIBI said:
you can do it on your own:
extract the update.zip on your pc (best with 7.zip)..
then inside this you see an update.app - copy this to another folder..
rename the copied update.app into update.zip..
open this zip - inside is another update.app - extract this too..
then open huaweiupdateextractor..load the last extracted update.app and get the recovery.img from it..
i tested this and it works..my phone booted after flashing this recovery (i tried to root by twrp 2.8.1.0) normal and without issues..
Click to expand...
Click to collapse
yeah i know realized..
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
blueIBI said:
does it work simona?
Click to expand...
Click to collapse
well i had issues .. no 4g option but 4G worked but when i selected in mobile networks 3G/2G I couldnt go back to 4G bcos no option.. so I reflashed 602 again and 4G worked but still no option so I erased/restored phone and all good except motion control is empty...
Simona Simmy said:
yeah i know realized..
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
well i had issues .. no 4g option but 4G worked but when i selected in mobile networks 3G/2G I couldnt go back to 4G bcos no option.. so I reflashed 602 again and 4G worked but still no option so I erased/restored phone and all good except motion control is empty...
Click to expand...
Click to collapse
Everything works fine for me. Even pple saying you cant lower resolution is not true. They moved it to battery saving option pretty shure.
Simona Simmy said:
yeah i know realized..
---------- Post added at 01:25 PM ---------- Previous post was at 01:24 PM ----------
well i had issues .. no 4g option but 4G worked but when i selected in mobile networks 3G/2G I couldnt go back to 4G bcos no option.. so I reflashed 602 again and 4G worked but still no option so I erased/restored phone and all good except motion control is empty...
Click to expand...
Click to collapse
same problem
what is this option anyway?!
Here you are
Simona Simmy said:
guys can u pls provide original recovery from 602 ?
Click to expand...
Click to collapse
Here I send the link to the 602 recovery. Flash it with bootloader
https://www.dropbox.com/s/unt8u9j51nbnmmy/B602_RECOVERY.img?dl=0:good:
require your Ascend P7 to be running the B133 firmware prior installing the beta EMUI 3.0 firmware which is numbered as B602. If you have any other firmware running on your Ascend P7 you won’t be able to install the B602 update.
Click to expand...
Click to collapse
B133 SP01 - it won't work with SP04
haninatoon said:
2. Download the B602 update from the internet and install it manually over the B133 firmware. You can download the B602 EMUI 3.0 firmware update from here – http://goo.gl/Buqw9f
Click to expand...
Click to collapse
Excuse me for being a dumbass ... what do you mean by "manual install over B133 fimware" ?
I put update.zip into "dload" folder on the MicroSD but the updater app says no update can be found.
EDIT: now is ok, update.zip was corrupted so I re-downloaded the file.
Thanks
SP
farzin07 said:
same problem
what is this option anyway?!
Click to expand...
Click to collapse
think it's bcos of beta ..
it works perfect even camera is much better much faster . got the update b602 from the phone directly (system update).
great news.
everything is working ... it"s now a monster machine !
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Hey
jurgen24 said:
it works perfect even camera is much better much faster . got the update b602 from the phone directly (system update).
great news.
everything is working ... it"s now a monster machine !
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
do you upgrade first to B133 before this? or any other ROM to update first before this?
upgrade 133 first yes.
but read the forum i did exactly how it was explained.
i did manually update to b602,but waited for the system update message to get the 3.0 version
Sent from my HUAWEI P7-L10 using XDA Free mobile app
jurgen24 said:
upgrade 133 first yes.
but read the forum i did exactly how it was explained.
i did manually update to b602,but waited for the system update message to get the 3.0 version
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
this mean it is official update or still in beta?
I got a problem here,I installed the Emui 3.0 version but now when my phone's open it always says "unfortunately com.android.phone has stopped",I did a factory reset but it doesn't solve the problem,could someone help me please?
hi there,
I read before that there's one user who is able to install L09's 136 on L19. Please consider to share the guide. Thank you
Why do you think that l19 doesn't receive updates? I have .136 update on my l19.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Huawei P9
Here is my Chinese AL00
I have L19C185 and it is still having B130 can I change it to C432? @Milamber @ione2380
engineer000 said:
I have L19C185 and it is still having B130 can I change it to C432? @Milamber @ione2380
Click to expand...
Click to collapse
I don't think so engineer000
I just got another update:
Even I have 130 still..? might be the updates are based on region?
Sent from my EVA-L19 using XDA-Developers mobile app
Milamber said:
I don't think so engineer000
I just got another update:
Click to expand...
Click to collapse
I think its possible but we need a full stock firmware of C432 so we can flash the phone, i am to stuck with C185 and want to change to EU version C432. Is there any way to extract the full firmware from the phone?
---------- Post added at 04:13 PM ---------- Previous post was at 04:09 PM ----------
engineer000 said:
hi there,
I read before that there's one user who is able to install L09's 136 on L19. Please consider to share the guide. Thank you
Click to expand...
Click to collapse
I wonder if u lose the dual sim function if u flash the L09 to L19?
Mostar088 said:
I think its possible but we need a full stock firmware of C432 so we can flash the phone, i am to stuck with C185 and want to change to EU version C432. Is there any way to extract the full firmware from the phone?
---------- Post added at 04:13 PM ---------- Previous post was at 04:09 PM ----------
I wonder if u lose the dual sim function if u flash the L09 to L19?
Click to expand...
Click to collapse
It is fine for me. I just wanted to have latest FW always specially the Google patches.
engineer000 said:
It is fine for me. I just wanted to have latest FW always specially the Google patches.
Click to expand...
Click to collapse
I got a new update to my L19 C185
Sent from my EVA-L19 using XDA-Developers mobile app
I receive the same ****. Still having march patch. haha
BTW, it display 4g even the mobile data is off. is it normal?
engineer000 said:
I receive the same ****. Still having march patch. haha
BTW, it display 4g even the mobile data is off. is it normal?
Click to expand...
Click to collapse
Yes, if u read the logg i posted it says 4g displayd even when wifi is on.
Sent from my EVA-L19 using XDA-Developers mobile app
Mostar088 said:
I got a new update to my L19 C185
Click to expand...
Click to collapse
same here, got the update for my L19 as well..L19C185B138..
Here's how i did mine:
1. SuperSU did a full un-root without restoring stock images.
2. Flashed the stock recovery.
3. Ran the update
4. Flashed TWRP back
5. Flash SuperSU zip..
Edit: In recovery it failed to update the package and has started downloading the full package. Will share the package once it is downloaded.
https://mega.nz/#!gNNCDRpB!Dy0hlPBKojAznSIKig2X7YxIjQa8BqDY3Lv_nwl6MIk
Is there anyone that can share L19C432Bxxx full stock?
Sent from my EVA-L19 using XDA-Developers mobile app
Hello,
is there a way to get international rom on my AL10? I bought it because of 4GB/64GB instead of 3GB/32GB.. DualSim isn´t important for me.
But I want better support for german language and Google Playstore..
Since a UL00/10 from P8 could be converted to L09, is there something similar possible for AL10 P9 or at least another Custom? maybe C433? C432 wasn´t present for P8 chinese models, but C433.
I think it's possible but u need to find stock firmware to AL29 thats the global version.
Sent from my EVA-L19 using XDA-Developers mobile app
has L29 also 4GB/64GB or will this be detected?
Gesendet von meinem SM-G935F mit Tapatalk
Yes it has 4gb/64gb it's the same phone.
Sent from my EVA-L19 using XDA-Developers mobile app
Asked Huawei support for help, this is there answer.
Start read from the bottom!
Hi
Yes you are able to do that but we cant garante it will owrk out fine later on. This also brakes the warrenty on the unit.
Regards
Huawei*
Albin
Från:*
Skickat:*den 24 maj*2016 15:24
Till:*
Ämne:*Ang: Mail Support
Ok, i just want to know if it's possible to cross flash C432 with C182?
Skickat från min Huawei Mobile
-------- Ursprungligt meddelande --------
Ämne: SV: Mail Support
Från:
Till:*
Kopia:*
Hello
Sorry for distrubing you but we have no put out an EU firmware for the EVA-L19 that we can send to you over sprend.
Regards
Huawei Support
Albin
Från:
Skickat:*den 23 maj*2016 17:41
Till:
Ämne:*Ang: Mail Support
Hi, i want to cross flash my L19C185 to the EU version C432 because i live in EU. I bought this version on eBay and its the Middle East/Africa version. Is it possible?
-------- Ursprungligt meddelande --------
Ämne: SV: Mail Support
Från:
Till:*
Kopia:*
Hello
Why do you need these rom? Have you check our website?*
http://consumer.huawei.com/en/
Regards
Huawei Technician
Albin
Från:*no_reply
Skickat:*den 21 maj 2016 1:43
Ämne:*Mail Support
SubjectName:Queries
CategoryName:Version upgrate or rollback
UserName:null
Place:Sweden（瑞典）
Product:EVA-L19
Purchase Date:2016-05-15
Content:Hi, i need a full stock rom to EVA-L19C432Bxxx, can u please help me so i can download it somewhere? Regards
Sent from my EVA-L19 using XDA-Developers mobile app
Transform a p9 eva-l09 to p9 eva-l19
Hi
Is it possible to transform a P9 EVA-L09 in to a P9 EVA-L19 ?
maybe with a full stock rom of P9 EVA-L19, I see it is possible in the other way, so....
The goal is to transform an european P9 mono sim in to a P9 dual sim!
If somebody has an experience, please share.
Thanks a lot
Mostar088 said:
Asked Huawei support for help, this is there answer.
Start read from the bottom!
Hi
Yes you are able to do that but we cant garante it will owrk out fine later on. This also brakes the warrenty on the unit.
Regards
Huawei*
Albin
Från:*
Skickat:*den 24 maj*2016 15:24
Till:*
Ämne:*Ang: Mail Support
Ok, i just want to know if it's possible to cross flash C432 with C182?
Skickat från min Huawei Mobile
-------- Ursprungligt meddelande --------
Ämne: SV: Mail Support
Från:
Till:*
Kopia:*
Hello
Sorry for distrubing you but we have no put out an EU firmware for the EVA-L19 that we can send to you over sprend.
Regards
Huawei Support
Albin
Från:
Skickat:*den 23 maj*2016 17:41
Till:
Ämne:*Ang: Mail Support
Hi, i want to cross flash my L19C185 to the EU version C432 because i live in EU. I bought this version on eBay and its the Middle East/Africa version. Is it possible?
-------- Ursprungligt meddelande --------
Ämne: SV: Mail Support
Från:
Till:*
Kopia:*
Hello
Why do you need these rom? Have you check our website?*
Regards
Huawei Technician
Albin
Från:*no_reply
Skickat:*den 21 maj 2016 1:43
Ämne:*Mail Support
SubjectName:Queries
CategoryName:Version upgrate or rollback
UserName:null
Place:Sweden（瑞典）
Product:EVA-L19
Purchase Date:2016-05-15
Content:Hi, i need a full stock rom to EVA-L19C432Bxxx, can u please help me so i can download it somewhere? Regards
Click to expand...
Click to collapse
Weird... I got fed up waiting for the beta so flashed a ROM and it all went pear shaped.
After days of reflashing I finally got a Nougat ROM that almost works. I'm without camera and bluetooth like others here but I have no way of flashing the hw_euro zip as I cannot install TWRP. Fastboot mode says unlocked for phone and frp and has one IMEI number but the phone isn't unlocked.
When I boot up I get a different IMEI in settings and I have no way of getting to 'manufacture mode' as *#.... code doesn't work.
My build number is now 'NRD90M test-keys'
I assume there's no other way of flashing the hw zip? Is there any way out???
zemblance said:
I assume there's no other way of flashing the hw zip? Is there any way out???
Click to expand...
Click to collapse
Maybe try everything again. Flash Rollback package and check if everything is ok.
But wait. How it's possible that you are unable to flash hw package? Dload doesn't see this package or what?
Thanks for responding. How would you flash the separate HW (update_full_hw_eu) file in dload? I thought it was TWRP only?
In other thread someone wrote how to do it.
Download these to zips: update.zip and update_full_hw_eu.zip
Unpack update.zip to dload folder and move hw zip to other folder. Then turn off your phone and enter dload mode - your phone will install update.zip
Then, when your phone boot up, delete all files from dload folder and unpack update_full_hw_eu.zip and move these files to dload folder. Turn off your phone and boot into dload. It'll install everything
Thanks but I get "Software install failed' at the 5% mark.
zemblance said:
Thanks but I get "Software install failed' at the 5% mark.
Click to expand...
Click to collapse
I had the same problem so i flash B136 and went back to 6.0 use the firmware in this guide. Put update.app and hw and dt folder toghether in dload map and update.
http://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903/page1
Sent from my VIE-L29 using XDA Labs
I used this post a few months ago to debrand my EE phone and it was a success, but I only had one IMEI back then (and one unlock code), and TWRP. I will try again now with 'dload' only. Fingers crossed. Cheers...
Failure. Are you sure that the HW package can be installed outside of TWRP??? I was certain it's otherwise. I would love to get my bluetooth back...
zemblance said:
Failure. Are you sure that the HW package can be installed outside of TWRP??? I was certain it's otherwise. I would love to get my bluetooth back...
Click to expand...
Click to collapse
It works outside TWRP i did it myself. Try use Rollback flash before u flash B136.
http://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091/page1
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
It works outside TWRP i did it myself. Try use Rollback flash before u flash B136.
http://forum.xda-developers.com/p9/how-to/rollback-eva-l19-android-7-0-emui-5-0-t3496091/page1
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
You are the greatest human being that ever lived!!!!!!!! It worked a treat!
zemblance said:
You are the greatest human being that ever lived!!!!!!!! It worked a treat!
Click to expand...
Click to collapse
Nice that it works, i know how frustrating it is when you are stuck :good:
Sent from my VIE-L29 using XDA Labs
Thanks. I now have a functioning *182 phone. The weird thing is there's still a Jekyll/Hyde thing going on. In settings the firmware is EVA-L09C432B182 though in DC Unlocker it is listed as EVA-C900B182 and I still have two IMEIs (and the 2 unlocker codes - one for each IMEI - do not work at all).
For everyone struggling to get the beta to work with twrp, the proper way to do it is to:
1) First of all, make sure you are flashing the right TWRP version. While browsing through numerous topics on this forum I've stumbled upon at the least two different versions, both of which worked and allowed me to run the l09 b322 beta successfully, but doing so with the earlier version resulted in no camera, bluetooth and other issues, while using the correct one I've got myself a perfectly fine nougat I'm happily using today. The correct one is 3.0.2.0 with encryption support
2) secondly, you need to be perfectly sure you are flashing the correct version, made strictly for your device, possibly downloaded from the Huawei servers. I believe both L09 and L19 ROMs can be flashed regardless of the device, but may not work properly, eg. the NFC problems etc. Also remember, there are always two zip's - the main update and the apps package (so-called EU package), which have to be flashed at the same time, because after you boot the system the TWRP will no longer be accessible.
3) about that TWRP and root - afaik, there is no perfectly working Nougat version, so after updating to beta you will not be rooted.
4) be prepared for the bad case scenario and get the rollback package + the stock marshmallow firmware version. That small update.app included in the package will sorta unlock the rollback possibility and will allow you to flash the stock ROM. One important thing here is that because you have no TWRP at this moment (see point 2) the flashing is done via the dload method - place the update.app in the 'dload' folder on the root of your external SD card, turn off the phone and turn it on by holding vol +, vol - and power button which will start the update process. After it's done, the system will boot up - unpack the stock firmware zip, find the update.app, copy it to 'dload' folder, power off and power on with the above-mentioned combination - congrats, you are back to the stock ROM with locked bootloader and may start over with the TWRP and so on.
OFC that's the way it worked for me and im just sharing the info - not responsible if it goes wrong
Help Please!!!!
Mostar088 said:
Nice that it works, i know how frustrating it is when you are stuck :good:
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Hi Brother you Seem to have experience I have VIE-L29
I updated to this ROM
https://forum.xda-developers.com/p9-plus/how-to/easy-guide-to-upgrade-vie-l29c636-to-t3538540
on My Phone and I ended up with NRD90M Test-Keys
and I dont know my previous build/cust number i dont even know if it was C636
Please help me get back to stock rom
How do I find my CUST number
being in my country I downloaded C185 Middle east build from official site for my country (Pakistan)
but when I leave the file in dload it give firmware incompatible with current version error
crossmedia said:
Hi Brother you Seem to have experience I have VIE-L29
I updated to this ROM
https://forum.xda-developers.com/p9-plus/how-to/easy-guide-to-upgrade-vie-l29c636-to-t3538540
on My Phone and I ended up with NRD90M Test-Keys
and I dont know my previous build/cust number i dont even know if it was C636
Please help me get back to stock rom
How do I find my CUST number
being in my country I downloaded C185 Middle east build from official site for my country (Pakistan)
but when I leave the file in dload it give firmware incompatible with current version error
Click to expand...
Click to collapse
Can u get in to ProjectMenu if u dail *#*#2846579#*#*
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Can u get in to ProjectMenu if u dail *#*#2846579#*#*
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
No bro I don't get it :'(
I tried C636 rollback in link and that worked I don't know why but if it did so should i flash c636 official ? I should be more careful right? My both Imei are still intact
Sent from my VIE-L29 using Tapatalk
crossmedia said:
No bro I don't get it :'(
Click to expand...
Click to collapse
Ok, thats because of the test key version, but if it was from Pakistan it would for sure be C185 if it not branded?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Ok, thats because of the test key version, but if it was from Pakistan it would for sure be C185 if it not branded?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
No bro i just found it on Huawei Pakistan Page so i assumed, it can be any but how to tell is there a way to find out from product id,imei or serial?
Sent from my VIE-L29 using Tapatalk
---------- Post added at 05:20 PM ---------- Previous post was at 05:15 PM ----------
Okay I bro i thought of something and it worked,I checked for previously snapped Jpeg details
And it turns out it was VIE-L29C185B181
Now the question is how do i get my way around this
Incompatible with current version
Error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my VIE-L29 using Tapatalk
crossmedia said:
No bro i just found it on Huawei Pakistan Page so i assumed, it can be any but how to tell is there a way to find out from product id,imei or serial?
Click to expand...
Click to collapse
If u bought it in Pakistan it is C185 that is thw Cust for Middle East/Africa. And if u upgrade to Nougat with wrong Cust like C636 that is Asia u will end up in Test key version, C432 is EU. Have u used the Rollback Firmware?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
If u bought it in Pakistan it is C185 that is thw Cust for Middle East/Africa. And if u upgrade to Nougat with wrong Cust like C636 that is Asia u will end up in Test key version, C432 is EU. Have u used the Rollback Firmware?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes when I used both Rollbacks
First I tried roll back from Huawei Pakistan Site C185 rollback
Kept it in dload powered it on pressing all three buttons and got the
Incompatible with current version error
Then I tried the rollback in OP's Link well that worked
But after that the C185B181 FW gave same error by same method
Although it couldnt find FW from internal storage so I was using 64GB Samsung Evo+
Sent from my VIE-L29 using Tapatalk
Hello,
I'm new in forum. Hello everybody.
I have a doubt. I live in Spain but I'm not sure if my sw version is appropriate to my region because other colleagues don't have the same 9.1 version.
I currently have the EMUI 9.1.0.241 (C461E4R1P5patch02) GPU Turbo.
I am not able to receive update to EMUI 10.
Have I the correct sw EMUI version for Spain? Can I do anything to swap to the correct version?
Best regards
Sherpaxxx said:
Hello,
I'm new in forum. Hello everybody.
I have a doubt. I live in Spain but I'm not sure if my sw version is appropriate to my region because other colleagues don't have the same 9.1 version.
I currently have the EMUI 9.1.0.241 (C461E4R1P5patch02) GPU Turbo.
I am not able to receive update to EMUI 10.
Have I the correct sw EMUI version for Spain? Can I do anything to swap to the correct version?
Best regards
Click to expand...
Click to collapse
Hi m8,
Maybe your friends have C431 or C432 phone custs rather then your, C461. But that's ok, if you want to update to EMUI 10, you can download your firmware version from here - HUAWEI P30 PRO VOG-L29 HW CEA VOGUE-L29C 10.0.0.173(C461) (it's faster from your phone rather PC) and using an OTG adapter or OTG Cable or an Huawei NM Card you can have EMUI 10. Read and follow my guide from here.
Feel free to ask if you have more questions.
Silviuo
Thanks very much.
Could you tell me the difference between C341-C342 and C461?
I should investigate if my current version fits me or not before making any change (I wouldn't like to make a full new installation from zero because I don't like make backups)
Beat regards
Sherpaxxx said:
Thanks very much.
Could you tell me the difference between C341-C342 and C461?
I should investigate if my current version fits me or not before making any change (I wouldn't like to make a full new installation from zero because I don't like make backups)
Beat regards
Click to expand...
Click to collapse
C431 - European cust and mostly used by carriers to add their customised software
C432 - International and European cust
C461 - European, Middle East and Africa version
C431&C432 have country vendor as EEA, or the European Economic Area, combines the member countries of the European Union (EU) (it was made to be sold in EU).
C461 has country vendor as EMEA, which is a shorthand designation meaning Europe, the Middle East and Africa (IT was made to be sold in Europe, the Middle East or Africa).
If you want to see for what countries it was made your phone you need to type in dialer *#*#2846579#*#* then Network info-on query>Country Vendor Info>Vendor (it will surelly be EMEA and not EEA as mine is - VOG-L29 C431-, as shown in picture bellow)
It's not a problem if you have an C461 device, you still get updates and can be used on any european carrier.
SilviuO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my VOG-L29 using Tapatalk VIP
Thanks SilviU. You are a machine.
I've checked and country is CEA. what does it mean?
My Cust sw version.. Is it going to receive updates like C431-C432?
BR
Sherpaxxx said:
Thanks SilviU. You are a machine.
I've checked and country is CEA. what does it mean?
My Cust sw version.. Is it going to receive updates like C431-C432?
BR
Click to expand...
Click to collapse
CEA = Central Europe Africa, so it's ok to use it.
C461 has allready got EMUi 10, as i sent you the link for it, but it may take a whille untill it hits your device. The advantage of using dload firmware is that you don't have to wait for OTA from Huawei (just backup stuffs with HiSuite and personal stuffs on PC and then flash that firmware) or from HiSuite and install when you want. And yes, it will receive firmwares as C431 or C432, but after those 2 got them (it's a delay from Huawei, it could take a month or 2, depending on how Huawei pushes the update)
SilviuO
Thank you again.
Sherpaxxx said:
Thank you again.
Click to expand...
Click to collapse
Anytime, m8 :highfive:. Glad i could help you by sharing some of :silly: my knowledge and helped you make a decission about your phone usage
Cheers,
SilviuO
Sent from my VOG-L29 using Tapatalk VIP
Hello for me I got a p30 ele-l29 in c461 , is there any dload flash to get it into emui 10 please I want it so badly and the ota don't wanna come I have waited more than 2 months and I got nothing bro if you have a link I'll be thankful have a good day
walidbenzii said:
Hello for me I got a p30 ele-l29 in c461 , is there any dload flash to get it into emui 10 please I want it so badly and the ota don't wanna come I have waited more than 2 months and I got nothing bro if you have a link I'll be thankful have a good day
Click to expand...
Click to collapse
Hi m8,
EMUI 10 for ELE-L29 C461 is version ELLE-L29B 10.0.0.168(C461E4R3P1)_Firmware_NA_EMUI10.0.0_05015SYE.EF and can be downloaded from that link. But it's a paid account and i don't have one. Maybe @tensux can help you by providing you a Google Drive link for you to be able to install on your device
Sent from my VOG-L29 using Tapatalk VIP
Please @tensux help me bro I'm dying lol I want that emui 10 please bro
walidbenzii said:
Please @tensux help me bro I'm dying lol I want that emui 10 please bro
Click to expand...
Click to collapse
Here you go:
VOG-L29 10.0.0.173(C461) https://drive.google.com/open?id=1oZ3Y75s7bfvm7nmyyp8R06-gRvoyNxMH
you will need to use an EF file extractor:
https://easy-firmware.com/index.php?a=articles&b=article&id=1
tensux said:
Here you go:
VOG-L29 10.0.0.173(C461) https://drive.google.com/open?id=1oZ3Y75s7bfvm7nmyyp8R06-gRvoyNxMH
you will need to use an EF file extractor:
https://easy-firmware.com/index.php?a=articles&b=article&id=1
Click to expand...
Click to collapse
hi bro
i need the ele-l29b c461 not the vog-l29 :crying:
tensux said:
Here you go:
VOG-L29 10.0.0.173(C461) https://drive.google.com/open?id=1oZ3Y75s7bfvm7nmyyp8R06-gRvoyNxMH
you will need to use an EF file extractor:
https://easy-firmware.com/index.php?a=articles&b=article&id=1
Click to expand...
Click to collapse
@walidbenzii,
DON'T use this firmware, it will SOFTBRICK your device, it's the firmware for VOG-L29 not for ELE-L29. @tensux downloaded the wrong firmware, he didn't check my post's link posted earlier, which was for ELE-L29 C461 .
The link provided has the same firmware i've posted few days ago on this thread.
Sent from my VOG-L29 using Tapatalk VIP
SilviuO said:
@walidbenzii,
DON'T use this firmware, it will SOFTBRICK your device, it's the firmware for VOG-L29 not for ELE-L29. @tensux downloaded the wrong firmware, he didn't check my post's link posted earlier, which was for ELE-L29 C461 .
The link provided has the same firmware i've posted few days ago on this thread.
Sent from my VOG-L29 using Tapatalk VIP
Click to expand...
Click to collapse
thanks bro , i see that he post me the wrong firmware !!
im not a lucky guy :crying: :crying:
walidbenzii said:
thanks bro , i see that he post me the wrong firmware !!
im not a lucky guy :crying: :crying:
Click to expand...
Click to collapse
i was reading the thread post, thought you had a p30 pro
are you looking for this?
ELLE-L29B 10.0.0.168(C461E4R3P1)_Firmware_NA_EMUI10.0.0_05015SYE
https://drive.google.com/open?id=1viSOYwJMFfeGKqr3OEG1_r8ZkE5Q_xfc
tensux said:
which one are you looking for? let me know if i can get it i will post it
Click to expand...
Click to collapse
https://easy-firmware.com/index.php?a=downloads&b=file&id=174464
Sent from my VOG-L29 using Tapatalk VIP
SilviuO said:
https://easy-firmware.com/index.php?a=downloads&b=file&id=174464
Sent from my VOG-L29 using Tapatalk VIP
Click to expand...
Click to collapse
edited before your post, posted above
tensux said:
i was reading the thread post, thought you had a p30 pro
are you looking for this?
ELLE-L29B 10.0.0.168(C461E4R3P1)_Firmware_NA_EMUI10.0.0_05015SYE
https://drive.google.com/open?id=1viSOYwJMFfeGKqr3OEG1_r8ZkE5Q_xfc
Click to expand...
Click to collapse
tensux said:
edited before your post, posted above
Click to expand...
Click to collapse
walidbenzii said:
thanks bro , i see that he post me the wrong firmware !!
im not a lucky guy :crying: :crying:
Click to expand...
Click to collapse
There you have it, @walidbenzii. Download and flash on your device. Thanks for help, @tensux
Sent from my VOG-L29 using Tapatalk VIP
Thanks a lot my brother's you're the best guys
I wish for you two all the best in this 2020
Good luck ?
Help! Your device has loaded a different operating system.
I downloaded an EMUI 10 ROM (VOG-L09) from https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639.
And install through *#*#2846597#*#*.
I forgot to cache clear...:crying::crying::crying:
and I got this P30 Pro from New Zealand, the model is VOG-L09 as shown on the box. I am not sure the version correct?
I downloaded "Huawei P30 Pro VOG-L09 hw eea HLRCF VOGUE-L09C 9.1.0.161(C431E4R2P2) Firmware 9.0.0 r3 EMUI9.0.1 05015TKC [androidhost.ru].zip" and did not work as well.
Can not use wifi to recovery.
Does anyone can help me?
bendrift said:
Help! Your device has loaded a different operating system.
I downloaded an EMUI 10 ROM (VOG-L09) from https://forum.xda-developers.com/huawei-p30-pro/how-to/ready-emui-10-c431-dload-version-t4008639.
And install through *#*#2846597#*#*.
I forgot to cache clear...:crying::crying::crying:
and I got this P30 Pro from New Zealand, the model is VOG-L09 as shown on the box. I am not sure the version correct?
I downloaded "Huawei P30 Pro VOG-L09 hw eea HLRCF VOGUE-L09C 9.1.0.161(C431E4R2P2) Firmware 9.0.0 r3 EMUI9.0.1 05015TKC [androidhost.ru].zip" and did not work as well.
Can not use wifi to recovery.
Does anyone can help me?
Click to expand...
Click to collapse
Hi m8, can you please tell me what version and cust is now on your device, in order to help you reviving your device? Use Fastboot in order to find out what version and cust you're on. For how to, please check this link and use the following commands:
fastboot oem get-build-number
and press enter button
This command checks the version, cust and actual firmware of your phone.
Sent from my VOG-L29 using Tapatalk
---------- Post added 14-02-2020 at 00:21 ---------- Previous post was 13-02-2020 at 23:37 ----------
After you will get your info about your version and cust (ex. VOG-L09 C185), head over to my thread and download the firmware matching your phone's needs.
https://forum.xda-developers.com/hu...-emui-10-dload-fw-vog-l09vog-l29-v10-t4032143
If you need more guidance, feel free to ask (gonna be a delay from my side, since here it's 12:20AM
Sent from my LIO-L29 using Tapatalk
SilviuO said:
Hi m8, can you please tell me what version and cust is now on your device, in order to help you reviving your device? Use Fastboot in order to find out what version and cust you're on. For how to, please check this link and use the following commands:
fastboot oem get-build-number
and press enter button
This command checks the version, cust and actual firmware of your phone.
Sent from my VOG-L29 using Tapatalk
---------- Post added 14-02-2020 at 00:21 ---------- Previous post was 13-02-2020 at 23:37 ----------
After you will get your info about your version and cust (ex. VOG-L09 C185), head over to my thread and download the firmware matching your phone's needs.
https://forum.xda-developers.com/hu...-emui-10-dload-fw-vog-l09vog-l29-v10-t4032143
If you need more guidance, feel free to ask (gonna be a delay from my side, since here it's 12:20AM
Sent from my LIO-L29 using Tapatalk
Click to expand...
Click to collapse
Thank you. All I know is VOG-L09. I just do the fastboot and ADB command.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SilviuO said:
Hi m8, can you please tell me what version and cust is now on your device, in order to help you reviving your device? Use Fastboot in order to find out what version and cust you're on. For how to, please check this link and use the following commands:
fastboot oem get-build-number
and press enter button
This command checks the version, cust and actual firmware of your phone.
Sent from my VOG-L29 using Tapatalk
---------- Post added 14-02-2020 at 00:21 ---------- Previous post was 13-02-2020 at 23:37 ----------
After you will get your info about your version and cust (ex. VOG-L09 C185), head over to my thread and download the firmware matching your phone's needs.
https://forum.xda-developers.com/hu...-emui-10-dload-fw-vog-l09vog-l29-v10-t4032143
If you need more guidance, feel free to ask (gonna be a delay from my side, since here it's 12:20AM
Sent from my LIO-L29 using Tapatalk
Click to expand...
Click to collapse
All I know is VOG-L09.
I just do the ABD command. I donot know how to insert image, just give the google drive share link.
https://drive.google.com/drive/folders/1OiKNaGNWCl7WQ1Z0NKKjhFzregEwTrzH?usp=sharing
bendrift said:
All I know is VOG-L09.
I just do the ABD command. I donot know how to insert image, just give the google drive share link.
https://drive.google.com/drive/folders/1OiKNaGNWCl7WQ1Z0NKKjhFzregEwTrzH?usp=sharing
Click to expand...
Click to collapse
Ok, so your device is VOG-L09 C636. I've searched for a firmware for your device, but the only one available was for VOG-L29 C636 and you can't use it, because it will get you still softbricked. ATM, i'm affraid you will have to wait for a Huawei release of a dload firmware for VOG-L09 C636 cust. You can't downgrade, because that is done only with HiSuite PC version and if you enter eRecovery it will fail, because EMUI 10 wasn't released for your device.
You might have a chance by taking it to Huawei Service Center and tell them it got in this state whille trying to get updated by itself, using OTA (Over The Air updates), maybe they will change your phone's motherboard free of charge
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Ok, so your device is VOG-L09 C636. I've searched for a firmware for your device, but the only one available was for VOG-L29 C636 and you can't use it, because it will get you still softbricked. ATM, i'm affraid you will have to wait for a Huawei release of a dload firmware for VOG-L09 C636 cust. You can't downgrade, because that is done only with HiSuite PC version and if you enter eRecovery it will fail, because EMUI 10 wasn't released for your device.
You might have a chance by taking it to Huawei Service Center and tell them it got in this state whille trying to get updated by itself, using OTA (Over The Air updates), maybe they will change your phone's motherboard free of charge
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
:crying::crying::crying:
Thanks. I think I have to wait huawei release that version.
bendrift said:
:crying::crying::crying:
Thanks. I think I have to wait huawei release that version.
Click to expand...
Click to collapse
This is one of the source site for dload firmwares and this one is the other site... When they will post the firmware, i will get it and share to you, because downloading from each requires a paid service
Sent from my LIO-L29 using Tapatalk
SilviuO said:
This is one of the source site for dload firmwares and this one is the other site... When they will post the firmware, i will get it and share to you, because downloading from each requires a paid service
Sent from my LIO-L29 using Tapatalk
Click to expand...
Click to collapse
Thank you sooooo much. mate.
bendrift said:
Thank you sooooo much. mate.
Click to expand...
Click to collapse
:highfive: hope to bring you good news (alongside with the link) about you much awaited dload firmware
Sent from my LIO-L29 using Tapatalk
SilviuO said:
:highfive: hope to bring you good news (alongside with the link) about you much awaited dload firmware
Sent from my LIO-L29 using Tapatalk
Click to expand...
Click to collapse
M8, I just found that link. https://easy-firmware.com/index.php?a=downloads&b=file&id=175151
Is that true or not.
bendrift said:
M8, I just found that link. https://easy-firmware.com/index.php?a=downloads&b=file&id=175151
Is that true or not.
Click to expand...
Click to collapse
That firmware is legit, but it's unusable for you, because can't be used to downgrade from EMUI 10 to EMUI 9.1. The only way to downgrade is by using HISuite PC and having a working phone with HiSuite app installed. In order to revive your phone, you need an EMUI 10 dload firmware (as the same you've linked) for your cust (VOG-L09 C636).
Sent from my VOG-L29 using Tapatalk
SilviuO said:
That firmware is legit, but it's unusable for you, because can't be used to downgrade from EMUI 10 to EMUI 9.1. The only way to downgrade is by using HISuite PC and having a working phone with HiSuite app installed. In order to revive your phone, you need an EMUI 10 dload firmware (as the same you've linked) for your cust (VOG-L09 C636).
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
I see. So do you know when New Zealand can upgrade to EMUI 10?
bendrift said:
I see. So do you know when New Zealand can upgrade to EMUI 10?
Click to expand...
Click to collapse
Dual SIM got the update and i have it too on my thread for flashing (v10.0.0.178), single SIM (VOG-L09) don't have a clue.
If you want to test it using the VOG-L29 firmware, you can find it on the link bellow, named VOGUE-L29D 10.0.0.178(C636E8R1P4)_Firmware_NA_EMUI10.0.0_05016BBD.
https://forum.xda-developers.com/hu...-emui-10-dload-fw-vog-l09vog-l29-v10-t4032143
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Dual SIM got the update and i have it too on my thread for flashing (v10.0.0.178), single SIM (VOG-L09) don't have a clue.
If you want to test it using the VOG-L29 firmware, you can find it on the link bellow, named VOGUE-L29D 10.0.0.178(C636E8R1P4)_Firmware_NA_EMUI10.0.0_05016BBD.
https://forum.xda-developers.com/hu...-emui-10-dload-fw-vog-l09vog-l29-v10-t4032143
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
My phone softbriker. sad. Maybe have to change the motherboard.
bendrift said:
My phone softbriker. sad. Maybe have to change the motherboard.
Click to expand...
Click to collapse
Even if it is softbricked atm, you can try to flash the firmware i've told you in my previous post. Download it, copy the dload folder to your OTG memory stick, Power OFF phone, then press POWER+VOLUME UP buttons and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Maybe you're in luck and that version will revive your device.
If not, then you will have to wait for VOG-L09 C636 dload firmware or even change motherboard, as you said previously.
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Even if it is softbricked atm, you can try to flash the firmware i've told you in my previous post. Download it, copy the dload folder to your OTG memory stick, Power OFF phone, then press POWER+VOLUME UP buttons and keep them pressed untill you see Huawei on screen. Release the POWER button and keep pressing VOLUME UP untill you are in eRecovery menu, then release button. When in menu, select Update mode, then select Memory card/OTG update mode and it should start the update.
Maybe you're in luck and that version will revive your device.
If not, then you will have to wait for VOG-L09 C636 dload firmware or even change motherboard, as you said previously.
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
I am doing now... very disturbed. But it looks like stucks on the verifying update.
bendrift said:
I am doing now... very disturbed. But it looks like stucks on the verifying update.
Click to expand...
Click to collapse
Hope it will get through and ends with a succesfull update
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Hope it will get through and ends with a succesfull update
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
Nah... failed. still show me Has loaded different system...
bendrift said:
Nah... failed. still show me Has loaded different system...
Click to expand...
Click to collapse
Bad luck .
It's clear now, you'll will have to wait for VOG-L09 C636 dload firmware or even change motherboard, if you can do it no charge at Huawei Service Center, as you said previously (otherwise i know it's somewhere ~300$, quite expensive).
Anyway, i will let you know when a VOG-L09 C636 dload firmware will be available
Cheers,
SilviuO
Sent from my VOG-L29 using Tapatalk
SilviuO said:
Bad luck .
It's clear now, you'll will have to wait for VOG-L09 C636 dload firmware or even change motherboard, if you can do it no charge at Huawei Service Center, as you said previously (otherwise i know it's somewhere ~300$, quite expensive).
Anyway, i will let you know when a VOG-L09 C636 dload firmware will be available
Cheers,
SilviuO
Sent from my VOG-L29 using Tapatalk
Click to expand...
Click to collapse
Thank you. Hope that day coming soon.