[Q] How do I get back go regular firmware without a brick - One (M7) Q&A, Help & Troubleshooting

I used this thread http://forum.xda-developers.com/showthread.php?t=2391611 and how I get back to regular lite firmware without having a hard brick. I am s-off and I have att model

dragonballz2k said:
I used this thread http://forum.xda-developers.com/showthread.php?t=2391611 and how I get back to regular lite firmware without having a hard brick. I am s-off and I have att model
Click to expand...
Click to collapse
the safest and easiest way is to flash the ruu.exe that match your phone, in your case an at&t RUU I guess

dragonballz2k said:
I used this thread http://forum.xda-developers.com/showthread.php?t=2391611 and how I get back to regular lite firmware without having a hard brick. I am s-off and I have att model
Click to expand...
Click to collapse
Post your fastboot getvar all please, remove imei and serial number before posting as it's dangerous to post this info.

alray said:
the safest and easiest way is to flash the ruu.exe that match your phone, in your case an at&t RUU I guess
Click to expand...
Click to collapse
Seanie280672 said:
Post your fastboot getvar all please, remove imei and serial number before posting as it's dangerous to post this info.
Click to expand...
Click to collapse
C:\WINDOWS\system32>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.9
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT******
(bootloader) imei: 35***********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4304mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.126s
So there is no way just to change my firmware from google dark bootloader to regular fimware without getting this error "QHSUSB_DLOAD"
Thanks for the help so far

Well the link below is your exact ruu, however, as you say you have the dark Google bootloader, I don't know how to return that to normal, I do know however, do not s-on
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/

I mean I dont want to go back to stock I want to change the bootloader like change the firmware to regular firmware without havening to use the script. Thank you for the help so far
Edit: I just decided to update my firmware by going form 4.x to 5.x and then 6.x so it nothing would go wrong it worked

Seanie280672 said:
Well the link below is your exact ruu, however, as you say you have the dark Google bootloader, I don't know how to return that to normal, I do know however, do not s-on
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
well according to his fastboot getvar all, this is not the correct ruu (MID is PN0712000) and that one is for PN0711000. I'm alsmot 100% sure 4.19.401.9 from his getvar is only referring to the custom hboot and not to his software #.
With pn0712000 he either have a google edition phone (.1700) a dev (.1540) or an at&t phone (.502).
@dragonballz2k
do you remember your original CID?

alray said:
well according to his fastboot getvar all, this is not the correct ruu (MID is PN0712000) and that one is for PN0711000. I'm alsmot 100% sure 4.19.401.9 from his getvar is only referring to the custom hboot and not to his software #.
With pn0712000 he either have a google edition phone (.1700) a dev (.1540) or an at&t phone (.502).
@dragonballz2k
do you remember your original CID?
Click to expand...
Click to collapse
ahh well spotted, I missed that one. :good:

Thanks guys for the help but I got my firmware updated by going from 4.x to 5.x and then 6.x . I do have to att model.

Related

[Q] Back to Stock for Bell HTC One

I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Nic2112 said:
I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Click to expand...
Click to collapse
post output of "fastboot getvar all"
remove S/N & IMEI before posting
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Nic2112 said:
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Click to expand...
Click to collapse
your previous CID was BM_001, right?
look into nkk71 SuperGUIDE in my signature
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
kamilmirza said:
your previous CID was BM_001, right?
Click to expand...
Click to collapse
I believe so, yes.
Nic2112 said:
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
Click to expand...
Click to collapse
yes sadly there is only nandroid of BM right now
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Nic2112 said:
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Click to expand...
Click to collapse
yeah maybe that could be the problem
why not try the nandroid and see how it goes?
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Oh Wow, there is a guide for Canadian HTC One, didn't know that!
Are you sure that a Telus RUU will work on a Bell phone? They use different networks I think
SaHiLzZ said:
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Click to expand...
Click to collapse
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
SaHiLzZ said:
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
Click to expand...
Click to collapse
I know how to go back to 1.44, I have done that before.
So what you are saying is that if I have the nandroid installed, and stock recovery from your thread, the phone will detect the OTA? It should install no problem because it will be a standard recovery.
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
SaHiLzZ said:
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
Click to expand...
Click to collapse
Thatk you, one last question before I try this, the OTA, will it replace the radios and firmware as well to Bell's? I guess it depends on what they put in the OTA.
Yes, OTA generally contain new OS, HBOOT, Recovery, and RADIO, practically a full RUU replacement, but not all. IF you are S-ON, you will need to lock bootloader after loading stock recovery, but if you are S-OFF, that doesnt matter, and I will suggest to stay S-OFF!
Please help
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
ginuwine96 said:
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
Click to expand...
Click to collapse
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Not sure what file I need
majmoz said:
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Click to expand...
Click to collapse
This is my phones Info I am not sure what file to use for it ?
bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4258mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
ginuwine96 said:
This is my phones Info I am not sure what file to use for it ?
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
If you're going to follow my guide, you'll need to use CWM method, using this nandroid: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
make sure to have read it once or twice, to be sure you're comfortable with the process

[HELP] Variant System Version

Hi,
I installed one of GuruReset roms to my htc one, Software number is 3.63.707.3 I bought this phone from turkey and i found that rom as compatible to my device. After i installed rom, i got a software update warning and started to download but when it starts to install, i got 'Variant System Version'. The device info is down below.
**TAMPERED**
**UNLOCKED**
security S-ON
HTC__J15
HBOOT 1.55.0000
RADIO 4A.21.3263.04
OS 3.63.401.3
When i try to update firmware in RUU mode, i got CID warning end it aborts setup. I thought my rom is incompatible. So i need help in this situation.
Thanks
ural_berk said:
Hi,
I installed one of GuruReset roms to my htc one, Software number is 3.63.707.3 I bought this phone from turkey and i found that rom as compatible to my device. After i installed rom, i got a software update warning and started to download but when it starts to install, i got 'Variant System Version'. The device info is down below.
**TAMPERED**
**UNLOCKED**
security S-ON
HTC__J15
HBOOT 1.55.0000
RADIO 4A.21.3263.04
OS 3.63.401.3
When i try to update firmware in RUU mode, i got CID warning end it aborts setup. I thought my rom is incompatible. So i need help in this situation.
Thanks
Click to expand...
Click to collapse
the variant error shows up when your OS in the bootloader and Software number inside the ROM doesnt match, you need to find a compatible ROM, the ROM you are using (3.63.707.3) is for India/Asia with cid HTC__038 and HTC__044 and MIDs PN0711000 and PN0714000 respectively, what's your Model ID? can you post the results of "fastboot getvar all" excluding your Serial No. and IMEI? if you can tell me your Model ID i can suggest the compatible stock ROM reset or RUU for your phone
muhammad.uzi1994 said:
the variant error shows up when your OS in the bootloader and Software number inside the ROM doesnt match, you need to find a compatible ROM, the ROM you are using (3.63.707.3) is for India/Asia with cid HTC__038 and HTC__044 and MIDs PN0711000 and PN0714000 respectively, what's your Model ID? can you post the results of "fastboot getvar all" excluding your Serial No. and IMEI? if you can tell me your Model ID i can suggest the compatible stock ROM reset or RUU for your phone
Click to expand...
Click to collapse
It's probably PN0711000 (m7_u not ul)
nkk71 said:
It's probably PN0711000 (m7_u not ul)
Click to expand...
Click to collapse
yeah, i think so too, my phone is m7_u too with this MID
muhammad.uzi1994 said:
yeah, i think so too, my phone is m7_u too with this MID
Click to expand...
Click to collapse
PN0710000 = M7_UL
PN0711000 = M7_U
HTC__J15 is Middle East CID, and both models are available (U and UL), but he got it in Turkey, and has OS 3.63.401.3 which I think is the U model
nkk71 said:
PN0710000 = M7_UL
PN0711000 = M7_U
HTC__J15 is Middle East CID, and both models are available (U and UL), but he got it in Turkey, and has OS 3.63.401.3 which I think is the U model
Click to expand...
Click to collapse
i dont know much about the Middle Eastern variants, maybe you can guide him better once he posts the result of "fastboot getvar all"
muhammad.uzi1994 said:
i dont know much about the Middle Eastern variants, maybe you can guide him better once he posts the result of "fastboot getvar all"
Click to expand...
Click to collapse
on the M7, it's just the same as the other international unbranded WWE editions, no differences.
the getvar all code results like below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.401.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3786mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
By the way, thanks for all replies. And also i tried the OS 3.63.401.3 version and it never prompts the 4.4.2 OTA update.
ural_berk said:
the getvar all code results like below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.401.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3786mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
By the way, thanks for all replies. And also i tried the OS 3.63.401.3 version and it never prompts the 4.4.2 OTA update.
Click to expand...
Click to collapse
edit your post and remove Serial No. and IMEI from it , just like i have removed them from the post quote
muhammad.uzi1994 said:
edit your post and remove Serial No. and IMEI from it , just like i have removed them from the post quote
Click to expand...
Click to collapse
I miss that, thanks. Re-editted
ural_berk said:
I miss that, thanks. Re-editted
Click to expand...
Click to collapse
can you gain s off using Rumrunner? because i cant find a stock Reset Guru Rom that matches your Model ID and CID, but there is an RUU for PN0711000 and HTC__J15 , it downgrades the OS so it requires s off , @nkk71 what do you think, man?
ural_berk said:
the getvar all code results like below.
(bootloader) version-main: 3.63.401.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_u
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
By the way, thanks for all replies. And also i tried the OS 3.63.401.3 version and it never prompts the 4.4.2 OTA update.
Click to expand...
Click to collapse
muhammad.uzi1994 said:
can you gain s off using Rumrunner? because i cant find a stock Reset Guru Rom that matches your Model ID and CID, but there is an RUU for PN0711000 and HTC__J15 , it downgrades the OS so it requires s off , @nkk71 what do you think, man?
Click to expand...
Click to collapse
1- Haven't seen any guru resets like that for that
2- why bother? if he goes s-off, he can flash whatever he likes
3- it's always nice when someone actually says what they intend to do and why... custom rom, stock rom, rooted, non-rooted etc etc etc
nkk71 said:
1- Haven't seen any guru resets like that for that
2- why bother? if he goes s-off, he can flash whatever he likes
3- it's always nice when someone actually says what they intend to do and why... custom rom, stock rom, rooted, non-rooted etc etc etc
Click to expand...
Click to collapse
At first, I dont want to s-off, want to return stock rom and get original OTA updates. But at the end, i went s-off and installed custom rom. However, if i find a solution. Try to s-on again, relock and want to use original rom.
ural_berk said:
At first, I dont want to s-off, want to return stock rom and get original OTA updates. But at the end, i went s-off and installed custom rom. However, if i find a solution. Try to s-on again, relock and want to use original rom.
Click to expand...
Click to collapse
If you want to go back fully to stock 100% you can use my guide: http://forum.xda-developers.com/showthread.php?t=2541082
nkk71 said:
If you want to go back fully to stock 100% you can use my guide: http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
I'm in the same situation. My HBOOT is 1.57 so I can't SOFF without Sunshine. I flashed Guru reset zip 3.63.707.3
When I check OTA it downlaods and gives me the variant system version error. I can't install with RUU either. What am I supposed to do?
jamiescott23 said:
I'm in the same situation. My HBOOT is 1.57 so I can't SOFF without Sunshine. I flashed Guru reset zip 3.63.707.3
When I check OTA it downlaods and gives me the variant system version error. I can't install with RUU either. What am I supposed to do?
Click to expand...
Click to collapse
@alray is your man, he has a collection of RUUs including for M7_U I believe
EDIT: ah here it is: http://forum.xda-developers.com/showthread.php?t=3053944
nkk71 said:
@alray is your man, he has a collection of RUUs including for M7_U I believe
EDIT: ah here it is: http://forum.xda-developers.com/showthread.php?t=3053944
Click to expand...
Click to collapse
Found a compatible RUU from the thread you gave. But couldn't flash the RUU zip, always got different errors.
Got sick of this after 11 hours of research and stuff. I've just SOFF'd my M7 with Sunshine, revert back to 1.29 (Sense 5 and 4.1.2 ) now installing all the firmwares one by one.
Thanks for your help mate.
jamiescott23 said:
Found a compatible RUU from the thread you gave. But couldn't flash the RUU zip, always got different errors.
Got sick of this after 11 hours of research and stuff. I've just SOFF'd my M7 with Sunshine, revert back to 1.29 (Sense 5 and 4.1.2 ) now installing all the firmwares one by one.
Thanks for your help mate.
Click to expand...
Click to collapse
did you relock bootloader and use the htc_fastboot.exe? then it should have worked just fine.
anyway, S-OFF is a much better thing to have imho, and since you're S-OFF you could consider changing the modelid to PN0710000; obviously it wont give you LTE (since the hardware is missing), but would allow you to get the "regular" .401. OTAs
but guess you wont need to worry about that for the time being, since PN0711000 is also on new version now.

[SOLVED] HTC One Debranding

I just bought an HTC One which is unlocked but it shows the O2 bootscreen. I wish to debrand the phone but will that lock the phone? I am not sure how the phone was unlocked by the previous user. Thanks
Klejdi90 said:
I just bought an HTC One which is unlocked but it shows the O2 bootscreen. I wish to debrand the phone but will that lock the phone? I am not sure how the phone was unlocked by the previous user. Thanks
Click to expand...
Click to collapse
No it will not lock the phone, unless you want it locked. Post a fastboot getvar all except remove the imei and serialno and we will be able to direct you how to rebrand your phone.
Klejdi90 said:
I just bought an HTC One which is unlocked but it shows the O2 bootscreen. I wish to debrand the phone but will that lock the phone? I am not sure how the phone was unlocked by the previous user. Thanks
Click to expand...
Click to collapse
Install a custom ROM.
SaHiLzZ said:
Install a custom ROM.
Click to expand...
Click to collapse
I wish to install a stock htc rom with ota can I do this without losing the unlock?
Klejdi90 said:
I wish to install a stock htc rom with ota can I do this without losing the unlock?
Click to expand...
Click to collapse
I dont know if you are talking about sim unlock or bootloader unlock but anyway, both sim and bootloader will stay unlocked even if you flash another rom or if you debrand the phone.
I see
@alray Yeah I mean sim unlock, Can you post a link of a guide to install stock htc rom to debrand. Will I be able to get OTA updates? What steps are needed Unlock bootloader, s-off, change cid custom recovery and install rom? Can you link me to a stock rom with ota for europe or international version. I had a look at the first link in your sig but its kinda confusing.
@nkk71 can you help?
I did a fastboot getvar all and here it is;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.206.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTXXXXXXXXXX
(bootloader) imei: 35XXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4321mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.187s
Klejdi90 said:
@alray Yeah I mean sim unlock, Can you post a link of a guide to install stock htc rom to debrand. Will I be able to get OTA updates? What steps are needed Unlock bootloader, s-off, change cid custom recovery and install rom? Can you link me to a stock rom with ota for europe or international version. I had a look at the first link in your sig but its kinda confusing.
@nkk71 can you help?
I did a fastboot getvar all and here it is;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.206.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTXXXXXXXXXX
(bootloader) imei: 35XXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4321mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.187s
Click to expand...
Click to collapse
If you want a full conversion, you can s-off the phone, change cid to HTC__001 and flash a x.xx.401.x RUU. Your best option to s-off on hboot 1.57 is probably sunshine s-off but its a paid exploit (25 USD) or you can try firewater, its free but it will require more steps and you have like 50% chance it will not work.
or the easier way, if you only want a debranded rom, you could only unlock the bootloader, flash twrp 2.6.3.3 and then flash a rom (like arhd 71.1)
alray said:
If you want a full conversion, you can s-off the phone, change cid to HTC__001 and flash a x.xx.401.x RUU. Your best option to s-off on hboot 1.57 is probably sunshine s-off but its a paid exploit (25 USD) or you can try firewater, its free but it will require more steps and you have like 50% chance it will not work.
or the easier way, if you only want a debranded rom, you could only unlock the bootloader, flash twrp 2.6.3.3 and then flash a rom (like arhd 71.1)
Click to expand...
Click to collapse
@alray Hey I did everything and am now trying to get the right RUU for europe or international. I flashed this : RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe and it seems to be fine except I am still s-off and an for some reason an option while doing the initial wizard called Tell HTC tells me this is a test device so this option will remain on. What is causing this? My device is a test device?! Wrong RUU?
Edit: I am updating the phone but it wont find the latest after every boot it finds the next. Now installing 4.3, it was 4.1.2 to begin with..
Klejdi90 said:
@alray Hey I did everything and am now trying to get the right RUU for europe or international. I flashed this : RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe and it seems to be fine except I am still s-off and an for some reason an option while doing the initial wizard called Tell HTC tells me this is a test device so this option will remain on. What is causing this? My device is a test device?! Wrong RUU?
Edit: I am updating the phone but it wont find the latest after a boot it finds the next? It was 4.1.2 to begin with..
Click to expand...
Click to collapse
Tell HTC/test device is normal. You'll always get this message at the initial setup with s-off phones, don't worry with this.
The ruu will not turn back s-on and thats a good thing. Keep your phone s-off.
alray said:
Tell HTC/test device is normal. You'll always get this message at the initial setup with s-off phones, don't worry with this.
The ruu will not turn back s-on and thats a good thing. Keep your phone s-off.
Click to expand...
Click to collapse
Yeah I thought it was the s-off causing this. Thanks for you reply, gonna install update after update and see if it comes up with the latest. Bit strange it doesn't install the absolute latest, but I guess the final update size would be huge to have all the fixes in previous versions in one.
Klejdi90 said:
Yeah I thought it was the s-off causing this. Thanks for you reply, gonna install update after update and see if it comes up with the latest. Bit strange it doesn't install the absolute latest, but I guess the final update size would be huge to have all the fixes in previous versions in one.
Click to expand...
Click to collapse
updates must be installed incrementally, don't worry you'll eventually be on the latest version.
alray said:
updates must be installed incrementally, don't worry you'll eventually be on the latest version.
Click to expand...
Click to collapse
Yep installed 4.4.3 just now. Thanks for all your help guys :good: Got me a debranded HTC One now. Hated the O2 bootscreen :silly:

[Q] variant system software htc one m7

Hi, i have stock recovery, ( recovery_4.19.401.11.img ) , and software version 6.07.1540.2, until now i can get OTA updates , but i can't get latest OTA and got warning "variant system software". What can i do to get OTA ? Thanks in advance
Here is my variables;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH*****
(bootloader) imei: 354*****
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4139mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
mustafayuceel said:
Hi, i have stock recovery, ( recovery_4.19.401.11.img ) , and software version 6.07.1540.2, until now i can get OTA updates , but i can't get latest OTA and got warning "variant system software". What can i do to get OTA ? Thanks in advance
Here is my variables;
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: S*********
(bootloader) imei: 354****************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4139mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Use the guru reset rom here for your version and choose yes to flashing stock recovery during install
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-developer-edition-t2915170
also edit out your serial no and IMEI from you first post
And your CID does not match the developer edition software your using
clsA said:
And your CID does not match the developer edition software your using
Click to expand...
Click to collapse
I noticed this as well, how is that possible with s-on?
And your CID does not match the developer edition software your using
Click to expand...
Click to collapse
What can i do about that ? will that be problem ?
mustafayuceel said:
What can i do about that ? will that be problem ?
Click to expand...
Click to collapse
Apart from the fact you have the wrong recovery I think that the mismatch with your firmware and CiD is your problem.
I'm not sure how you can put that right without s-off though.
What OS version number does the OTA your trying to install have?
You can try to flash the latest 6.09.401.12 firmware over it. In theory that should work as it will match your CiD and MiD
Danny201281 said:
Apart from the fact you have the wrong recovery I think that the mismatch with your firmware and CiD is your problem.
I'm not sure how you can put that right without s-off though.
What OS version number does the OTA your trying to install have?
You can try to flash the latest 6.09.401.12 firmware over it. In theory that should work as it will match your CiD and MiD
Click to expand...
Click to collapse
I agree .. that firmware should straighten things out
Danny201281 said:
Apart from the fact you have the wrong recovery I think that the mismatch with your firmware and CiD is your problem.
I'm not sure how you can put that right without s-off though.
What OS version number does the OTA your trying to install have?
You can try to flash the latest 6.09.401.12 firmware over it. In theory that should work as it will match your CiD and MiD
Click to expand...
Click to collapse
OTA tries to load 7.17.1540.7
Can you help me please to find 6.09.401.12 firmware and compatible latest software (i think 6.09.401.111 ?)
mustafayuceel said:
OTA tries to load 7.17.1540.7
Can you help me please to find 6.09.401.12 firmware and compatible latest software (i think 6.09.401.111 ?)
Click to expand...
Click to collapse
Nop, you need 6.09.401.12 firmware and 6.09.401.12 Rom. Only thing is if you do change you won't get the OTA as I don't think it's been pushed for 401 yet. But at least you'll be ready when it comes
I have a 6.09.401.11 nandroid and Firmware. That may do the trick but I'll see if I can find the .12 first
İ decided to pay 25 $ and get s-off and change cid mid then continue as developer edition. What do you think , is it reasonable, (and feasible ? ) can you help me step by step ? I am on the way , will be home and start process in 1 hour . Thank s for your help.
I think I need to find recovery compatible with 6.07.1540.2 software. Please @Danny201281 or @alray , at least one of you can help me ?
I got s-off now.
@alray wrote that at another thread;
1-Use Sunshine to achieve s-off
2-change your cid to BS_US001
3-change your MID to PN0712000
4-flash the 7.17.1540.7 RUU or take the 7.17.1540.7 ota update.
i gained s-off by using sunshine... now i will change cid and mid and take take the 7.17.1540.7 ota update. But my recovery is recovery_4.19.401.11.img . I think this will be a problem. Where can i find suitable recovery ?
I changed cid to BS_US001 but changing mid is difficult i think. do i have to change it to get ota (7.17.1540.7) ?
mustafayuceel said:
I changed cid to BS_US001 but changing mid is difficult i think. do i have to change it to get ota (7.17.1540.7) ?
Click to expand...
Click to collapse
Open firmware file and check if it allows your mid. If not, and S-off, add your own and flash firmware.zip!
SaHiLzZ said:
Open firmware file and check if it allows your mid. If not, and S-off, add your own and flash firmware.zip!
Click to expand...
Click to collapse
I get file via OTA so i dont have it. I tried again but still i got "variant system software", i think that means my mid is not allowed.
How can i change my mid ? can you help me step by step ?
I think s-off skips signature check so changing firmware.zip content will not be problem, am i right ?
mustafayuceel said:
İ decided to pay 25 $ and get s-off and change cid mid then continue as developer edition. What do you think , is it reasonable, (and feasible ? ) can you help me step by step ? I am on the way , will be home and start process in 1 hour . Thank s for your help.
I think I need to find recovery compatible with 6.07.1540.2 software. Please @Danny201281 or @alray , at least one of you can help me ?
I got s-off now.
Click to expand...
Click to collapse
EDIT:- Never mind [emoji19] I see I missed the last few posts and am way behind!!! As you were men :good:
Danny201281 said:
EDIT:- Never mind [emoji19] I see I missed the last few posts and am way behind!!! As you were men :good:
Click to expand...
Click to collapse
I changed mid thanks to @Golv post. http://forum.xda-developers.com/showthread.php?t=2535365
Now i am applying last ota... it is % 60 now. I hope i will not get error. Thanks for your support. :good:
i just leave this here in case of any need in the future : http://forum.xda-developers.com/htc-one/general/stock-rom-reset-developer-edition-t2915170

First time custom rom

Alright so I have been wanting to change my htc one (802w/dual sim) from android 5.0.2, back to 4.4.2 or 4.4.3 though I want a full stock/htc like software of the android version.
I found some here http://forum.xda-developers.com/showthread.php?t=2617159
I've got a few questions though as I am a bit afraid I might harm my phone (saw some posts that some phones might break down and not function again..)
First thing about the RUU and firmware, I figured some stuff but please correct me if I'm wrong:
I will be downloading Android 4.2.2 RUU version: 2.19.401.1 - then OTA update version: 2.41.401.1-2.19.401.1 (should be still android 4.2.2 according to the collection thread)
And to be able to get to android 4.4.2 (might not need 4.4.3) I will download OTA 4.21.401.5-2.41.401.1
Well, is there anything wrong with the OTA versions or RUU?
Also, when I get to Android 4.2.2, can I just mainly check for updates over "Software updates" and will I get the updates from HTC? Or they will prevent it as I installed a *custom* rom?
And for the main thing, please link me any tutorial or guide (in-depth will be appreciated.. would like to know what I'm doing) to install the rom and any other files if needed.
Sorry for the long post, have a good day!
Regards,
Matt.
MattTucke said:
Alright so I have been wanting to change my htc one (802w/dual sim) from android 5.0.2, back to 4.4.2 or 4.4.3 though I want a full stock/htc like software of the android version.
I found some here http://forum.xda-developers.com/showthread.php?t=2617159
I've got a few questions though as I am a bit afraid I might harm my phone (saw some posts that some phones might break down and not function again..)
First thing about the RUU and firmware, I figured some stuff but please correct me if I'm wrong:
I will be downloading Android 4.2.2 RUU version: 2.19.401.1 - then OTA update version: 2.41.401.1-2.19.401.1 (should be still android 4.2.2 according to the collection thread)
And to be able to get to android 4.4.2 (might not need 4.4.3) I will download OTA 4.21.401.5-2.41.401.1
Well, is there anything wrong with the OTA versions or RUU?
Also, when I get to Android 4.2.2, can I just mainly check for updates over "Software updates" and will I get the updates from HTC? Or they will prevent it as I installed a *custom* rom?
And for the main thing, please link me any tutorial or guide (in-depth will be appreciated.. would like to know what I'm doing) to install the rom and any other files if needed.
Sorry for the long post, have a good day!
Regards,
Matt.
Click to expand...
Click to collapse
Post the output of "fastboot getvar all", remove your IMEI and SERIALNO before posting.
alray said:
Post the output of "fastboot getvar all", remove your IMEI and SERIALNO before posting.
Click to expand...
Click to collapse
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.19.3509.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.402.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3756mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
MattTucke said:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: U3.19.3509.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.17.[COLOR="red"]402[/COLOR].15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7cdug
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0771000
(bootloader) cidnum: [COLOR="Red"]HTC__J15[/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 3756mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
You can't do what you said above. x.xx.401.x RUU is not for your cid (HTC__J15). You can only flash RUU that are designed for your CID and MID and since your phone is S-ON, you can't downgrade using a RUU. You'll either need to S-OFF the phone so you can flash an old M7CDUG x.xx.402.x RUU or use old costom roms.
alray said:
You can't do what you said above. x.xx.401.x RUU is not for your cid (HTC__J15). You can only flash RUU that are designed for your CID and MID and since your phone is S-ON, you can't downgrade using a RUU. You'll either need to S-OFF the phone so you can flash an old M7CDUG x.xx.402.x RUU or use old costom roms.
Click to expand...
Click to collapse
I did some searching and I found this RUU
Code:
www htc1guru com/dld/ruu_m7_ul_k44_sense55_mr_htc_europe_4-19-401-9_r_radio_4a-23-3263-28_10-38r-1157-04l_release_353069_signed_2-1-exe/
(I can't send outside links)
According to the site it's for CID HTC_J15 and modelid PN0710000
Does it mean I can flash it even though it's x.xx.401.x? Also if I can, can you please send a guide about how to S-OFF the phone?
Thanks again.
MattTucke said:
I did some searching and I found this RUU
Code:
www htc1guru com/dld/ruu_[B][COLOR="Red"]m7_ul[/COLOR][/B]_k44_sense55_mr_htc_europe_[B][COLOR="red"]4[/COLOR][/B]-19-[B][COLOR="red"]401[/COLOR][/B]-9_r_radio_4a-23-3263-28_10-38r-1157-04l_release_353069_signed_2-1-exe/
(I can't send outside links)
According to the site it's for CID HTC_J15 and modelid PN0710000
Does it mean I can flash it even though it's x.xx.401.x? Also if I can, can you please send a guide about how to S-OFF the phone?
Thanks again.
Click to expand...
Click to collapse
No you can't, this RUU is simply not for your phone, not even for the same variant.
To flash a ruu on a s-on phone:
The ruu must match your CID number. Yours is HTC__J15 ---> OK
The ruu must match your MID number Yours is PN0771000 this RUU is for PN0710000 --> NO
The ruu must match the firmware base version. Yours is .402 this RUU is .401 ---> NO
The ruu must be same or newer than the current firmware version installed. Yours is 7.xx.xxx.x , this ruu is 4.xx.xxx.x so it's a downgrade, can't downgrade with s-on --> NO
The ruu must match your variant. Yours is M&CDUG --> The ruu you want to flash is for M7_UL ---> NO
The bootloader must be locked or re-locked
If only on of the above condition isn't respected, the ruu won't flash... And even if you could achieve s-off, #5 will always cause problem. You can only use RUU for M7CDUG variant

Categories

Resources