Database Develop

[Q] Upgrade program crashed, stuck in upgrade boot screen. Now what? SOLVED!

Like the title says:
I just tried to upgrade my Optimus 2X via PC software. The package downloaded fine but in the middle of the upgrade process the PC software crashed(!) and now I have a phone which is stuck in the upgrade boot screen saying:
"S/W Upgrade
Please wait while upgrading..."
So, what now? Any way to get this thing working again?

First, remove your battery and put it in your phone. Boot the phone up and see where it goes. If it goes into S/W mode again, that sucks. If it goes to the LG boot screen, put the battery out again and put it in. Press Power + Volume Down buttom to go into the CWM menu. From there you can restore your backup (if you made one) or mount the SD card and put the (rom).zip file in your SD card. Then just flash the zip from the CWM.

The update process by LG is pathetic. Many a times, I had the same problem as you. It would just get stuck. It is because of faulty drivers on their part, unable to maintain a connection with the phone.
You can try to NVflash clockwork mod recovery (CWM) and then recover your data.

i have the same problem.
i've tried everything without luck.
mine stopes att 4 procent and pc is trying to install some new device
lge mobile composite usb device.
there is no way to work around this issue.
i have tried absolutly everything.
wipe, clean, drivers this that. hard reset, variations in installing, i don't know what else i can do,
this is the message that cousing all of this.
this is located just in upgrade mode
the device is called
LGE mobile composite usb device
Universal Serial Bus controllers
LG Electronics Inc.
Location : Port_#0001.Hub_#0004
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)

Thanks for the infos. I managed to install a stock rom and baseband with SmartFlash yesterday. Just a few minutes ago I used LG's update tool to update the phone to Gingerbread.
So, problem solved. If anyone has the same problem, follow these instructions to update the baseband:
http://android.modaco.com/topic/335494-12-aug-smartflash-stock-baseband-release-103521-20110725/
You can get stock roms from here:
http://forum.xda-developers.com/showthread.php?t=1035041

[Q] USB Device not recognized

Hello everybody,
I've got a problem with my optimus black.
I flash this ROM http://forum.xda-developers.com/showthread.php?t=1984246, but I'm not satisfied of it and I'm want to reflash the V20N with smartflash tool.
But when I put my phone in S/W Upgrade mode my windows said USB Device not recognized.
I've done this twice:
- install/uninstall usb driver and LG Pc suite
- change usb cable
- change usb port
- change ROM
Nothing work I thing that my bootloader is corrupt because it's modified in the V28c.
Thanks for helping me

just boot ur phone in software mode den it will recognize usb in smart tool flash..
Sent from my LG-P970 using xda app-developers app

redgolum said:
Hello everybody,
I've got a problem with my optimus black.
I flash this ROM http://forum.xda-developers.com/showthread.php?t=1984246, but I'm not satisfied of it and I'm want to reflash the V20N with smartflash tool.
But when I put my phone in S/W Upgrade mode my windows said USB Device not recognized.
I've done this twice:
- install/uninstall usb driver and LG Pc suite
- change usb cable
- change usb port
- change ROM
Nothing work I thing that my bootloader is corrupt because it's modified in the V28c.
Thanks for helping me
Click to expand...
Click to collapse
What version of Windows?
What version of USB Drivers? Try newer drivers.
Bootloader isn't be changed by flashing ROMs in CWM. ROMs only need to change from boot partition and upwards since thats all they need to change.
Sent from my LG-P970

nothing new
SamBG said:
just boot ur phone in software mode den it will recognize usb in smart tool flash..
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
What do you mean by software mode ? You mean when the phone is wake up and i'm on Lg Home ? Because when I do it smartflash doesn't find my phone, but windows yes. I tried also to use the SOS recovery mode of B2C but it said that my software version was up to date so it did nothing.
xonar_ said:
What version of Windows?
What version of USB Drivers? Try newer drivers.
Bootloader isn't be changed by flashing ROMs in CWM. ROMs only need to change from boot partition and upwards since thats all they need to change.
Sent from my LG-P970
Click to expand...
Click to collapse
I tried on windows 8 and 7. On twice I downloaded the newest driver 3.7.
I think a problem of bootloader because I flash the old version of V28c, with the .bin and .fls which had CMW inside, It was befor they release the .zip version. It's rewrite the bootloader no ?. And also because my phone doesn't wake up when I push on power button on the V28c, V20G, and CM10. I can only flash it because of rom manager and nandroid backup.
Thanks for help

Solved
After 2 day on this @"#[email protected]# phone, I find a solution work only on widows 7:
With the usb recognition I succed with this protocole,
1) Uninstall the Lg driver
2) Install the driver with B2C
3) Put the phone in S/W mode with the battery windows will say that it's not recognized,
4) Unplug the phone It will stay on S/W mode
5) Reboot Windows 7, and as soon as the desktop finish to load plug your phone
And miracle it's work. Sometime you need to do it 2,3, or 10 times.
Concerning the power bouton it still desn't work on V10A, V20N.... So I think it's broken, so I will exchange it with my operator.
Thank a lot for people who gave me some time.

redgolum said:
After 2 day on this @"#[email protected]# phone, I find a solution work only on widows 7:
With the usb recognition I succed with this protocole,
1) Uninstall the Lg driver
2) Install the driver with B2C
3) Put the phone in S/W mode with the battery windows will say that it's not recognized,
4) Unplug the phone It will stay on S/W mode
5) Reboot Windows 7, and as soon as the desktop finish to load plug your phone
And miracle it's work. Sometime you need to do it 2,3, or 10 times.
Concerning the power bouton it still desn't work on V10A, V20N.... So I think it's broken, so I will exchange it with my operator.
Thank a lot for people who gave me some time.
Click to expand...
Click to collapse
hey no need to restart ur windows 7 just after connecting the phone go in s/w mode...the tool will automatically detect the usb in sumtym...
Sent from my LG-P970 using xda app-developers app

[Q] Problems with recognizing

Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.

RuedasLocas said:
Check if you have the latest drivers, connect the phone in recovery (vol- and connect to PC), flash with LGFlash Tool.
Click to expand...
Click to collapse
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"

croluka4789 said:
I cant flash my LG with LG Flash because tihs program dont reconized my phone.. "Phone is not found"
Click to expand...
Click to collapse
palalos81 said:
hi. i woould like to downgrade from v20a to v10h and the lgflashtool doesn't work.some times stuck on ready and some others on 10%i have tried almost everything from installing the drivers once more until change pc and ports.is there any option to downgrade with another way?
Click to expand...
Click to collapse
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:

RuedasLocas said:
There is no other way...
Did you follow the tutorial? Did you remained calm and gave time for windows recognise your device?
Did you uninstall and re-install the drivers? You're able to reboot in SW mode (vol- pressed while connecting to PC)?
Here you have all files needed:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Delete your old files, download new ones and follow the tutorial.
Remember to remain calm and give time to system recognise and install everything needed.
Good luck :fingers-crossed:
Click to expand...
Click to collapse
TNQ...I fix my LG...and know work perfect I put 20A kdz. 4.1.2. and phone work perfect

Same problem here
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks

sgiedrius said:
I have the same problem. I think the stupid thing I did was to install V20a without rooting the phone. Now I cant root it. IS11LG_SystemBackupTest.signed.ap would not run and when I try to recover either with LGflashboot or LG firmware recovery I get the same error message "morning call is empty" (very strange error message). I can go back to v20a but since I am not completely happy with it I would like to resolve it. Is there any chance to fix it? I am not very confident to format bootload or installing custom ROM.
Thanks
Click to expand...
Click to collapse
You cannot root the phone on V20a using IS11LG_SystemBackupTest.signed.apk, since that file is used for versions V10x. Check out this link for rooting V20a: http://forum.xda-developers.com/showthread.php?t=2180688

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
Same problem here!

xavierleonelbr said:
Same problem here!
Click to expand...
Click to collapse
Uninstall all drivers and folders like "LG United Mobile Driver" and "LG USB Modem Driver".
Re-install the drivers:
http://www.4shared.com/file/rPpP2btT/LGUnitedMobileDriver_S4981MAN3.html
http://www.4shared.com/file/ZSMf2x6n/LGUSBModemDriver_Eng_WHQL_Ver_.html
Take out the battery, press "Power Button" (just to discharge all phone components), put the battery back on the phone.
Press "Vol-" and connect to PC. Wait while windows detect the device and search in windows update for possible new drivers.
Windows won't find a thing but will take some time while trying...
After that you should be OK.

Just did similar to my phone and followed the advice in this thread - now sorted. Thanks guys you rock!

if u epic fail to manually force the drivers in just install android jdk open it and update it.

croluka4789 said:
Please help me. I wanted to put cynogen mode on my LG 4X, and something went wrong. Now when I start the phone shows me the logo of LG and writes under, security error Morning Call is empty ... and now when I try to connect the phone to a computer , my computer is not show me LG like LG P880, than as a device unreconized device .. does anyone know how to fix my LG?
Click to expand...
Click to collapse
I had the same problem, after running several recovery procedures and kdz files, I finally was able to restore the phone to it's original ICS rom.
Download the files in the description and follow up the video.
http: www youtube com watch?v=12v5A3pArJQ
hope it helps.

[SOLVED] Soft brick D405n need a little help.

Rooted LG D405n, nothing done to the software beyond that (unless you count having zooper/nova launcher configured on it). Gave the phone to a friend for a short while and she decided to update the software using the LG software update on the phone. After she selected install on the latest update which came out not long ago and was supposedly going to update the apps, it restarted and got stuck on boot screen with Boot Ceritification Error [560].
I've tried this guide http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479 but I got stuck on step 4. because I cannot make the PC recognize the device (it does not show up at all), so the LG tool can't install USB drivers. If i try to do it manually (it gives me an option to select a device from a list) it doesn't seem to do anything, just gets stuck on the Downloading USB driver window.
I can put the phone in Firmware Upgrade Mode just fine, but it doesn't seem to do anything useful. The PC still won't recognize the device, however I can hear the 'usb pluged in' sound (I'm on Win7).
Did a factory reset, didn't help.

Asayanami said:
Rooted LG D405n, nothing done to the software beyond that (unless you count having zooper/nova launcher configured on it). Gave the phone to a friend for a short while and she decided to update the software using the LG software update on the phone. After she selected install on the latest update which came out not long ago and was supposedly going to update the apps, it restarted and got stuck on boot screen with Boot Ceritification Error [560].
I've tried this guide http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479 but I got stuck on step 4. because I cannot make the PC recognize the device (it does not show up at all), so the LG tool can't install USB drivers. If i try to do it manually (it gives me an option to select a device from a list) it doesn't seem to do anything, just gets stuck on the Downloading USB driver window.
I can put the phone in Firmware Upgrade Mode just fine, but it doesn't seem to do anything useful. The PC still won't recognize the device, however I can hear the 'usb pluged in' sound (I'm on Win7).
Did a factory reset, didn't help.
Click to expand...
Click to collapse
You could try the LG Support Tool. Not sure it will work but it's worth a shot. The problem with the phone not getting detected by the PC is the fact that 1) The OS was upgraded by your friend and 2) The factory reset you performed . Both of those acts would have disabled USB debugging hence no device detected.
I unfortunately have no encouraging information to give you.

shinobisoft said:
You could try the LG Support Tool. Not sure it will work but it's worth a shot. The problem with the phone not getting detected by the PC is the fact that 1) The OS was upgraded by your friend and 2) The factory reset you performed . Both of those acts would have disabled USB debugging hence no device detected.
I unfortunately have no encouraging information to give you.
Click to expand...
Click to collapse
It appears that I have fixed it.
Since The tool would not download the USB drivers by itself I went to the LG website and got them manually, installed them and restarted the PC.
After that I launched the LG Mobile Support Tool, but it still didn't see the device.
However, I clicked Options and Upgrade Recovery. It asked me for my IMEI. I put the phone into Firmware Upgrade mode and the program started upgrading the phone.
After it was all done, the phone restarted, and the software update simply said that instalation failed, I have lost root but everything else seems fine. Rooted again with towelroot and I'm back in game.

Asayanami said:
It appears that I have fixed it.
Since The tool would not download the USB drivers by itself I went to the LG website and got them manually, installed them and restarted the PC.
After that I launched the LG Mobile Support Tool, but it still didn't see the device.
However, I clicked Options and Upgrade Recovery. It asked me for my IMEI. I put the phone into Firmware Upgrade mode and the program started upgrading the phone.
After it was all done, the phone restarted, and the software update simply said that instalation failed, I have lost root but everything else seems fine. Rooted again with towelroot and I'm back in game.
Click to expand...
Click to collapse
Well I'm glad you managed to fix it.
Since this issue appears to be solved, please insert '[SOLVED]', without the quotes, at the beginning of your thread title.

[GUIDE] [UNBRICK]LG Magna H502F Stock Rom

Your LG Magna(H502) stuck on lg logo or bootlooping follow this guide to fix your device
Requirements:
USB Cable
LG Driver
LG FlashTool
MegaLock.dll
H502F Stock ROM
Let's start
1.Install the LG Driver
2.Install LG FlashTool and don't run it yet
3.Copy MegaLock.dll and replace in the folder LG FlashTool (C:\LG\LGFlashTool)
4.Turn off your device(remove battery and put it back to be sure its off)
5.Press and Hold the Volume UP button,plug in the USB cable and hold until you see "Firmware Update" you are now in download mode
Don't plug into usb 3.0 port and try other ports if getting issues
6.Open Device Manager on your PC
Go on "Ports (COM & LPT)" if the driver is installed properly, you will see "LGE Mobile USB Serial Port (COMxx)"
We need to change the COM port number to 41
Double click on "LGE Mobile USB Serial Port"
Go to Port Settings Tab and click Advanced
Change COM Port Number to COM41 and click OK
Disconnect USB cable,wait a few seconds and reconnect or reboot back in download mode to check if the drivers are working properly
7.Open LG FlashTool as admin
Tick the Select Manual Mode box
Extract LG Magna H502F.rar
Click the DLL "....." button and select the DLL found in the extracted folder(LGH502f_20150416_LGFLASHv190.dll)
Click the S/W add button and select the file with the .tot extension(LGH502fAT-00-V10a-CIS-XX-MAR-16-2015+0.tot)
Don't touch anything else and press ok
Flashing will format the phone all data will be lost
8.Click on the Yellow Arrow Button at the top left and it will start the flashing process
When you see ready in a few seconds you will be asked to disconnect and reconnect the cable and it will start flashing
It will take some time
During the flashing process, the phone will reboot itself and will display "MiniOS Factory Reset Status".Don't worry about it
When you see pass in FlashTool and Factory Reset Status 3 on your phone means the flashing process is completed
Disconnect the cable and remove the battery
Power on your phone and enjoy your working phone again (Don't forget to disconnect USB cable else if you didn't close the FlashTool it will go back in download mode and flash again)
Fixing problems
Factory Reset Status 2 and download fail
Method 1
1.Disconnect the cable and take out the battery after some seconds insert back
2.Press and hold both the power button and the volume down and hold until LG logo appears release the buttons and immediately press and hold both buttons again to go in Factory Reset
3.Choose Yes, then Yes again, the phone will reboot
Method 2
1.In step 7 where we are setting up the FlashTool change the action mode to Board DL instead of Upgrade DL
2.When the flashing is done your phone will reboot to the AAT Screen
3. Hold down power button and press normal boot (+power) your phone will reboot. (dont forget to disconnect usb cable or close the FlashTool)

LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Install LG Drivers from here : https://sourceforge.net/projects/avicohh/files/Android/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe/download

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Try installing the driver when you are in download mode or try other ports in your computer.If it still doesn't work try this driver http://oceanhost.eu/x1b0tjlhzw1z/LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe.htm

May the stock ROM work with h500f ?

Geralt1232 said:
May the stock ROM work with h500f ?
Click to expand...
Click to collapse
Nope

is this v10a? which ROM can be rooted and TWRPed?

xd
as I can install the KDZ I have the LG H502G And not catch any of that model Dll !! Help!!​

danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
You have to enable "Show hidden devices"

I lost data connection often when playing games or using any app can this problem solved by installing stock rom again? Plzz tell me the solution

Trying to get rid out TWRP
If I ever flash stock firmware, does custom recovery/TWRP be removed ?

yes.it will be replaced with stock...
Sent from Valhalla

Lg magna
My lg magna is not booting.
I tried installing a custom ROM it showed that it was done but its not booting now. Its not even booting to recovery mode. I've not tried flashing the a ock ROM but will it work.will it boot in download mode?

go to view option appear on that window and click on 'show hidden devices'
danvelle said:
LGE Mobile USB Serial Port (COMxx) doesnt appear on my device manager..help me please??
Click to expand...
Click to collapse
Reply::go to view option appear on that window and click on 'show hidden devices'

Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks

Aneom7331 said:
Hello, I have the following problem. As in every other thing ive done to this phone (root, installing twrp, installing xposed) I always thought my model was LG-H502F. Though, my model is LG-H500F, I bought it from Greece, I recently bought Huawei P8 lite 2017 for myself and I gave my old LG to my father, he tell me that sometimes it lags and he is right. I think it lags because I uninstalled Xposed (flashed the uninstall zip using twrp) and also removed root, because he didnt need those things in his phone. The question is: Is there somewhere I can get the stock LG-H500F zip and what guide should I use? Ive been searching for a while now and can't find many topics related to LG-H500F. Thanks
Click to expand...
Click to collapse
https://lg-firmwares.com/lg-h500f-firmwares/
just find the country you are in.

I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying

Aneom7331 said:
I found this page earlier but can you import the kzd file to LG Flash tool? I didn't test this but, I guess it works. Thanks for replying
Click to expand...
Click to collapse
yes. it will )

Hi, I'm in the same situation as Aneom7331, indeed I have a bricked LG Magna H500F and I'm trying to flashing a stock firmware. Where should I put the .kdz file in the lg flash tool 2.0.1.6? Moreover, the .kdz file has not a .dll file together with it, Thanks in advance

Someone have link to stock for h502y?