Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
AtanasP said:
Hello Guys !
My SGS is running with Mackay Rom 4.9.7
With the Mackay Kernel, the device can't handle even -25 mv undervolt - it crashes when i load something CPU heavy.
1.4 , 1.3 , 1.2 , even 1.1 Ghz is not running stable for long load, i tried undervolt and even overvolt for all of this frequencies - it crashes and restarts.
Would you recommend me good kernel for maximum overclock of the device ?
I have searched on Google , but i can't find the information that i want - there is no list for kernels, kernel opinions and recommendations anywhere.
Click to expand...
Click to collapse
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
kalpetros said:
For me the only Kernel that looks stable overclocked (1.2 Ghz) is Semaphore. It's a normal thing for your device to crash on high frequencies. The lack of a cooler makes your CPU hot and in order to prevent damage it crashes. At 1.2 Ghz it should work fine without any crashes (as long as the CPU governor is set ondemand)
Click to expand...
Click to collapse
I use semaphore with stock volt and 1.2 Ghz SmartassV2 - Noop and it work flawlesly
Ehndroix V + Neo Kernel // CyanAOSP + CyanCore
Using Neo Kernel, probably the best kernel i ever used so far.
It bases on Linaro 4.9, while the most other Kernels sit at 4.7 still.
For Antutu it keeps up at its highest preset: 1.32 GHz (Intelliactive) and I/O: BFQ (Stock). Getting impressive 6059 points.
For daily use i have it at 1.2 GHz, had no crash yet.
The kernel runs butter smooth with Ehndroix V.
The Best Kernel for Gaming is probably the CyanCore Kernel, if you use it with CyanAOSP (comes Stock with CyanCore Kernel) its the smoothest gaming experience so far i had on this device after the Legendary GamerzRom..
Related
Hey guys,
anybody tried the new Quallcom benchmark Vellamo? If so please share your points together with ROM/kernel Version, I/O and CPU governor.
I tried
- Overcome Jupiter 3.0.1 with 3.3.0 kernel at 1.4 GHz, using sio and smartass
- latest Dip7 ROM with Overcome kernel 3.3.0 at 1.4 GHz using sio and smartass
- latest Dip7 ROM with Dip7 kernel at 1.4 GHz using bfq and ondemand
in all cases I got around 755 points after the second run (first run after boot always gives like 100 points less, I think this is due to caching).
I would like to see results from other ROM/kernel/governor combinations, like CM7 and BOCA.
Cheers
I use gingerdx v12 and can sometimes restart itself (unstable)
Look the best of your processor oc.
If you get reboot at 806, it mean your device can't oc to 806
If you bestest overclock, i mean like your best oc is 768, that mean you only can oc from 0 Mhz (??) -- > 768 Mhz
Not connect with your rom!
Hit thanks if i helped you!
Edit: Also wrong thread section, it must at Q&A
chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Post questions in q&a section.
Each phone has different maximum overclock frequency. The rom doesn't matter, the phone does.
processor might be working harder,i'm affraid overclocking my phone in 800mhz..
i think oc in 710 should be nice and stable but batery drains more faster
chrisbymoningka said:
I use gingerdx v12 and can sometimes restart itself (unstable)
Click to expand...
Click to collapse
Although there might be a relationship between ROM and Overclock Stability, repeated test on various ROMS still gets me the same OC max of 748Mhz.
Please note that overclockability of the CPU depends on the CPU. Not all CPU's of the same make are equal. the design of our X8 called for a 600Mhz CPU clock, so it goes that it will be and always be stable at 600 Mhz. However go more than that and you have no guarantee at which Max Clock you will get. If you could go to 800 without FC and/or reboots then consider yourself very lucky.
for me.. i can't go far.. im using GingerCruzt.. and it has an option on overclocking.. once i checked the overclocked my phone reboots always..
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
OC 806Mhz
Nxmate said:
I can overclock with the Gingercruzt v7.3 oc module to 806Mhz, and it's not restart. Doxianh module i can max 768Mhz
Sorry for my english :S
Sent from my Shakira using xda premium
Click to expand...
Click to collapse
I can confirm OC @806Mhz with GC OC module (instead of DX's), running on MiniCM7 2.0.7...stable.
hmm when i using gingerDX v11, i tried overclock to 806Mhz and it stable for a while, but in 5 minutes i think, my device get reboot...
all roms can stable at 787Mhz in my device.. no reboot no force close... just stable and smooth, but battery drain
hey i wanted to know:
what is a good stable high performable overclock frequency for power/3d games??
Currently I have: HTC Incredible S rooted with runnydr0id 2.1 rom (android 2.3.5)
i have it overclocked to 1.3 ghz max. with setCPU
is this good ? do i need more?
mine is on 1.4ghz via CM7 settings. i think im using the brazilian wax governor from lord clockan kernel. 100% stable, havent had any reboots of slowdowns and the phone is incredible-y ( ;] ) quick all round.
Hello everybody I'm glad that I'm finally able to post my own thing in development section.
It's called Strong Accord because I'm accordionist and in future I'd like to make a rom with really good music sound
This kernel has been made for V30B (I didn't test it on CM10, it may work) and it's based on N00by's pure kernel. Compiled with linarno 4.6.
♪ ♪ ♪ CHANGELOG - v30b ♪ ♪ ♪
Code:
[B]Prelude - beta phase[/B]
- Added governors - Lionheart, Interactivex, SavagedZen
- Added shedulers - VR
- Compiled with -O3 optimization flags
- Undervolted WLAN and CPU
- Underclocked CPU min freq. to 250 MHz and overclocked max to 1050 MHz
- Overclocked GPU
- Dimmed softkeys leds to half of their power. Blue ones work as well
[B]Toccata - R.C. 0.1[/B]
- Added governor - SmartassV2
- Added scheduler - SIO
- Changed clocks to 250/500/700/900/1100
- fixed Wifi hotspot problem
- fixed some voltages problems
[B]Toccata - R.C. 0.2[/B]
- lowered CPU voltages
- OC GPU (290 MHz)
- made NemesisX version
[B]Toccata - R.C. 0.3[/B]
- optimized CPU voltages
- OC GPU (295 MHz and there won't be more)
- removed wheatley governor
- should work for every V30b based rom
[B]Toccata - R.C. 0.4 [/B]
- added init.d support from http://forum.xda-developers.com/showthread.php?t=1933849
- UC GPU to 285 MHz
- added OndemandX governor
- auto-clean Dalvik-Cache and Cache partitions
- set SIO and SmartassV2 as default
- some improvments at Deadline sheduler
- changed voltages
♪ ♪ ♪ CHANGELOG - v30c ♪ ♪ ♪
Code:
[B]Adagio 0.1 - Stable version [/B]
- Added governors - Lionheart, Interactivex, SavagedZen, IntelliDemand
- Added shedulers - VR and SIO
- Undervolted WLAN and CPU
- CPU clocks 250/500/700/900/1100
- Overclocked GPU to 285 MHz
- Added some tweaks
- init.d support
[B]Adagio 0.1a - Stable version [/B]
- Added SmartassV2
Download Prelude Version - http://d-h.st/48u
Download Toccata Version - http://d-h.st/yWG
Download Toccata Version 0.2 - http://d-h.st/Xdh
Download Toccata Version 0.2 NemesisX - http://d-h.st/M7b
Download Toccata Version 0.3 - http://d-h.st/GSy
Download Clean Repack V30C with Blue leds and init.d support http://d-h.st/Aab - should work with V30C rom
Download Adagio 0.1 - Stable version - http://d-h.st/KHW
Download Adagio 0.1 - Stable version HIGH VOLTAGE - http://d-h.st/AFa
Download Adagio 0.1a - Stable version - http://d-h.st/cCW
Download Adagio 0.1a - Stable version HIGH VOLTAGE - http://d-h.st/Uck
Source - https://github.com/Hellmanor/kernel_sniper-ICS
Source - https://github.com/Hellmanor/kernel_v30c
If somebody has USB Mass Storage problem just Re-launch USB Developer Options.
If Wifi doesn't work take from your rom file called wireless.ko in system/etc/wifi and replace it with that in my kernel.
Thanks to N00by for his CWM and LEDs fixes and andr00ib for support
If you like my work, you can buy me a beer
Enjoy it!
and i just thought that you'r a Honda fanatic.
Accord, Prelude..
you'r kernel sounds good, maybe i'm going to try tomorrow..
now i'm on zerogravity kernel.
I'm trying this kernel in ultrsound v30b.
After first boot phone was very slooow, I show in setcpu that max freq was 250, I changed it to 1050 and now phone is faster than before.
I tried to set smartassv2 governor but is missing in setcpu.
Wifi hotspot doesn't work, like in zerogravity kernel, is disabled in less than 1 second.
Led light is a little low, but I prefer it like that.
jes0411 said:
I'm trying this kernel in ultrsound v30b.
After first boot phone was very slooow, I show in setcpu that max freq was 250, I changed it to 1050 and now phone is faster than before.
I tried to set smartassv2 governor but is missing in setcpu.
Wifi hotspot doesn't work, like in zerogravity kernel, is disabled in less than 1 second.
Led light is a little low, but I prefer it like that. It would be nice if led's don't turn off until turn off screen.
Click to expand...
Click to collapse
how is the battery drain and Bluetooth
joker shadow said:
how is the battery drain and Bluetooth
Click to expand...
Click to collapse
I just installed the kernel now, hadn't have time to try bluetooth and battery.
Anyone else has wifi hotspot problem? 'Cause for me it's good...
And sorry - I didn't mean to miss SmartAss. I hope new version of kernel will appear in 5-6 hours from now - I can't do it faster, because I have exams.
Great to have new dev thread
but dont forget to provide source
http://forum.xda-developers.com/showthread.php?t=1992818
Using this kernel now with ultrasound ICS, good battery and smooth on game(NFSMW), never got this game so smooth before with any ICS I try. Thanks
Sent from my LG-P970 using Tapatalk 2
I hope you wont stop development of this kernel cause andr00ib droped support for ZeroGravityKernel for V30B.
At the Moment i use your kernel but i get ultra low 3D scores in antutu. Only about 600 or so.
No, I won't. Right now I'm trying to set github.
I think I fixed wifi problem.
And you've got strange score... I have 1196 in antutu...
EDIT: It will take some time to set git (my upload speed is so bad...), so I will just merge kernel and post it here...
Hellmanor said:
No, I won't. Right now I'm trying to set github.
I think I fixed wifi problem.
And you've got strange score... I have 1196 in antutu...
EDIT: It will take some time to set git (my upload speed is so bad...), so I will just merge kernel and post it here...
Click to expand...
Click to collapse
It was because of the interactive governor. on performance i got 1189.
savadgedzen: stuck at 250mhz
ineractivex: goes only down to 600mhz
interactive: seems to work
conservative: seems to work
ondemand: seems to worlk
Lionheart: seems to work
performance: works (of course it does
Thanks for your effort. I will look into code. Also I will try to enable o/c to 1200 MHz and stock 1000.
I enabled smartass v2 and sio governor. I think about adding Anticipatory scheduler.
And pls remember - I'm new in developing, but I will try my best
Try! And if you fail........try again.
Hellmanor said:
Anyone else has wifi hotspot problem? 'Cause for me it's good...
And sorry - I didn't mean to miss SmartAss. I hope new version of kernel will appear in 5-6 hours from now - I can't do it faster, because I have exams.
Click to expand...
Click to collapse
It seems to be ultrasound v30b v2 problem, sorry for post it in this threat without check it with stock kernel on this rom.
EDIT: Maybe I have to check it too, beacuse I'm not on stock.
just wanna ask, why did OB max OC is only 1350Mhz??
123r4ka456 said:
just wanna ask, wht did OB max OC is only 1350Mhz??
Click to expand...
Click to collapse
yes.
Sent from my LG-P970 using Tapatalk 2
OMAP 3630 can't handle more than 1300 MHz without issues. Stable is 1200 MHz
When can we expect version with 1000 and 1200 ?
And what about those new comits from arce , will you implement them ?
And another thing , will 1200 freq be undervolted ?
Cant wait for new version
Yes, I just want to be sure that all things are stable.
Can you show me that commits?
Here are my speed optimized kernels for samsung touchwiz jellybean, cm11 and aokp kitkat based roms
(many thx to Hank87 http://forum.xda-developers.com/member.php?u=4595544 for testing the many samsung touchwiz test kernels)
V1.2.1:
auto root (tw kernel)
cwm added (tw kernel)
fixed an bug that could make connecting to network very slow
rwsem: steal writing sem for better performance
ondemand: enabled counting iowait as busy for exynos too
kernel fixes for linaro gcc
kernel with AIO enabled
AIO: Don't plug the I/O queue in do_io_submit()
ROW as default io scheduler
build with linaro gcc 4.9.2
kernel build with -Ofast
faux123`s dyn fsync
optimized arm rwsem algorithmfixed an bug that could make the oc kernel unstable
overclock version with 1600mhz max with 16 step frequency table and reduced core voltage
overclock version with 1500mhz max with 15 step frequency table and optimized core voltage
standard version with 1400mhz max with 14 step frequency table and optimized core voltage
on idle cpu can go to 100mhz instead of 200mhz for longer battery life
higher (but save) thermal throttling values
optimized vm values
multithread dexopt enabled
Download:
For Samsung touchwiz jellybean based Roms (CWM zip + Odin tar):
non oc:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607166
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607164
oc1500mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607168
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607169
oc1600mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607172
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607171
For CM11 + AOKP kitkat based Roms (CWM zip):
non oc:
https://www.androidfilehost.com/?fid=95784891001608505
oc1500:
https://www.androidfilehost.com/?fid=95784891001608510
oc1600:
https://www.androidfilehost.com/?fid=95784891001608518
Sources:
https://github.com/bauner
testing TWoc1600 version right now. Antutu score is 20250. GPU has only two steps??? Will write more later, but thanks a lot for Your work on TW system
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
User_99 said:
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
Click to expand...
Click to collapse
thx for your post.
I will try it and if its working without any problems it comes in the next version
Sounds interresting what GeeckoDev found out. Looks like the new freque. also goot for non playing Note 1 users...
57hz - 59hz is completely safe. If you go beyond that, bootanimation will start to derp (turn off/on the screen once it's fully booted and you're good to go). Also you will have no access to the recovery. I only experienced that on AOSP, though. On Touchwiz I could go to 62hz without a problem. 64hz is fine with the workaround above.
It improves smoothness and lowers latency by quite a good margin (~17ms at 57hz, ~16ms at 60hz, ~15ms at 64hz).
Also, good luck with your kernel!
Had to go back to forest 1.90. On Your kernel cannot use gallery
Sent from my GT-N7000 using XDA Free mobile app
Hi thanx for the kernel... I am using oc1600 cm11 on dirty unicorns 8.2... Its working fine..
Sent from my GT-N7000
Hello Bauner
First of all thank u very much for a great kernel. I have tested the non OC and OC 1.5. Everything runs smoothly except for stock video player that got busted with the OC'ed vers just like forest's. I have yet to test battery as I have just completed one battery cycle. Will update if there's anything pops.
Sent from my GT-N7000 using XDA Free mobile app
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Thanks bauner for the great kernel.my note now more energized and smooth after flash with oc1.5ghz tw....antutuscore got 17k..also problem on whatsapp memory leak seems resolved now :beer:
bratboo said:
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Click to expand...
Click to collapse
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
bauner said:
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
Click to expand...
Click to collapse
Thanks! Will test maybe tom and change my governor to pegasusq. Hopefully when on normal use it will use a lower frequency instead of 1100. I'm using BetterBatteryStats to see how long each frequency runs and the majority is 1400, 1100 and 100.
About the higher consume of battery, yes there is one app that was running and it was FB messenger though it was also running when I compared it to the stock kernel from DU.
I'll give feedback again once I'm done with testing.
with my rom+kernel it doesn't stay at high frequencies.
the attached screenshot was made a few minutes after boot complete
It says it couldn't mount storage/sdcard0 when trying to mount in recovery.
(KitKat version)
Hi bauner,
Mine also stay highest 1.1ghz..why never reach 1.5ghz..I'm ondemand/row..
Sent from my GT-N7000 using XDA Free mobile app
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
slipkory said:
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Use this
Thanks lakame. Is it safe to use this triangleaway..this triangle due to flash via odin right..
bauner any steps to get rid this via flash?
Sent from my GT-N7000 using XDA Free mobile app
It's an app. Nothing to do only follow the guides in the app. Sometimes you need the correct kernel for resetting... try it out.