Related
Hi guys, I am having an issue i cant seem to resolve on my razr i. apologies if this has already been covered in another thread (or 10, which is usually the way with these things because nobody reads the other threads) I have been through a load of other threads but cannot seem to resolve my issue so i started my own.
Right, I have switched from iphone to razr and am not stupid when it comes to jailbreaking etc so thought rooting the razr wouldnt be a problem. when trying to root it it failed and i am stuck at the fastboot menu, however, everything on the menu is disabled so i cant use it. i get the usual message:
fastboot reason: flash failure
fastboot max download size: 100mb
usb connected
if i try to use anything on the menu i get the following message:
fastboot menu disabled.
my phone is not unlocked and not rooted. i have barely done anything to it other than install a couple of free apps. i am unable to progress past this screen. the phone is GB and is on 4.0.4
any help you guys can give would be greatly appreciated. again, apologies if this has already been covered, none of the solutions i found were able to resolve my issue. as i said, i had no problems jailbreaking my old iphone, i am a bit of a n00b when it comes to droids...
AW: [Q] razr i problems - fastboot menu
Are you able to run fastboot commands ? Cause in that case you might be able To unlock bootloader and reflash the software .
Sent from my XT890 using xda premium
xX_Alex_Xx said:
Are you able to run fastboot commands ? Cause in that case you might be able To unlock bootloader and reflash the software .
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
I am not able to do anything. if i scroll to any of the options on the menu as soon as i hit the volume up key it just returns a message advising the fastboot menu is disabled.
**edit
ah commands not menu options. not sure how i go about doing that. i am 100% new to droid...
ged flanders said:
Hi guys, I am having an issue i cant seem to resolve on my razr i. apologies if this has already been covered in another thread (or 10, which is usually the way with these things because nobody reads the other threads) I have been through a load of other threads but cannot seem to resolve my issue so i started my own.
Right, I have switched from iphone to razr and am not stupid when it comes to jailbreaking etc so thought rooting the razr wouldnt be a problem. when trying to root it it failed and i am stuck at the fastboot menu, however, everything on the menu is disabled so i cant use it. i get the usual message:
fastboot reason: flash failure
fastboot max download size: 100mb
usb connected
if i try to use anything on the menu i get the following message:
fastboot menu disabled.
my phone is not unlocked and not rooted. i have barely done anything to it other than install a couple of free apps. i am unable to progress past this screen. the phone is GB and is on 4.0.4
any help you guys can give would be greatly appreciated. again, apologies if this has already been covered, none of the solutions i found were able to resolve my issue. as i said, i had no problems jailbreaking my old iphone, i am a bit of a n00b when it comes to droids...
Click to expand...
Click to collapse
Had the same problem, I used the recommendation in this thread, 5th post and it worked, but afterwards need to re-download apps from PlayStore:
http://forum.xda-developers.com/showthread.php?p=36612151
Follow the instructions exactly - you need the drivers and RSD lite on Windows PC, then connect the phone via usb cable that came with it; and you'll need a full unzip program (cost) so you can move the unzipped files into RSD lite. Get the right flash file though - there's a list in the linked post if you don't want GB retail which I used. Important: this only works for ICS 4.0.4 and don't try to downgrade to an earlier version than what's currently on your phone e.g. v.39 to v.31, for example.
Good luck.
AW: [Q] razr i problems - fastboot menu
If the solution from mervluk does not work (It didn't work for me either) , you should try if you are able to use the fast boot commands .
To do that simply connect your phone to the PC. Then download fast boot , if you do not already have that. It is in the .zip from the RAZR I root thread.
The go to the downloaded folder. There hold shift and perform a right mouse click. Then choose" start a command prompt here "or something similar (don't know how the option is called in English).
Then type in
fastboot reboot
When the phone reboots you might be able to unlock your phone and flash the software.
BUT BE AWARE! YOU WILL LOSE YOUR WARRANTY!!
So you better try the other solution first. This should be your last option.
If you don't know how to unlock the bootloader look in the RAZR I forum or pn me .
Alex
Sent from my XT890 using xda premium
mervluk said:
Had the same problem, I used the recommendation in this thread, 5th post and it worked, but afterwards need to re-download apps from PlayStore:
http://forum.xda-developers.com/showthread.php?p=36612151
Follow the instructions exactly - you need the drivers and RSD lite on Windows PC, then connect the phone via usb cable that came with it; and you'll need a full unzip program (cost) so you can move the unzipped files into RSD lite. Get the right flash file though - there's a list in the linked post if you don't want GB retail which I used. Important: this only works for ICS 4.0.4 and don't try to downgrade to an earlier version than what's currently on your phone e.g. v.39 to v.31, for example.
Good luck.
Click to expand...
Click to collapse
thanks buddy. i will give this a whirl and let you know how i get on. fingers crossed!
mervluk - your advice worked a treat. i got it working again. thanks !
now i am working again, what cool tricks do people advise. is it worth rooting it ? what can i do once it is rooted? am i able to network unlock it myself ?
ged flanders said:
mervluk - your advice worked a treat. i got it working again. thanks !
now i am working again, what cool tricks do people advise. is it worth rooting it ? what can i do once it is rooted? am i able to network unlock it myself ?
Click to expand...
Click to collapse
Glad about that. This phone can be a bit of a so-and-so. ics is being updated ota to Jelly Bean 4.1.2, which I've avoided so far to keep fm (although not activated on the supplied software). I did succeed with unlocking the bootloader (loose warranty - important) following the whole complicated procedure on Moto's website - but couldn't myself use the shortcuts on here. (Then had to set up again and re-download everything from the PlayStore). It required the Moto-supplied key. I then rooted, though I think the JB ota download unroots again? You can't use RSD lite with JB.
With JB the procedures are different, and a modified JB European (not for use with GB) firmware is now available on another thread which is impressing some posters. But I think just be a bit cautious as there does not appear to be any fix for the "service code corrupt" bootloader error yet. Looks like the options are very restricted whilst no-one understand the interaction between Google Android and the intel atom chipset.
I have a network unlock key from one of the commercial suppliers (cellunlocker.net), but haven't needed to try and use it yet!
I have just managed to root my old LG P880/4xHD using advice from this forum. Thought I would try on an old phone first. One reason I tried is because I cannot update Android via the usual About phone, Software updates, Check now for updates. The Android version installed is 4.0.3. I am in Australia and it is possible the phone is an overseas model (got it from a friend in LG). Has "Not for Resale" stamped inside the back cover. When I try to update Android, I get an error message "Registered Error - Your device is not registered yet." I had hoped rooting would get around this but it hasn't. Have looked up old forum posts and there is talk of using .kdz files and all sorts of other things. Can anyone help me get around this registration issue but please be aware I am a novice and most of the older posts I read, I couldn't understand so simple explanations please. Thanks.
What you have is developer or test device and it is a bit different from normal ones. Try googling more but you will have hard time....
Sent from my microwave.
dimi89 said:
What you have is developer or test device and it is a bit different from normal ones. Try googling more but you will have hard time....
Sent from my microwave.
Click to expand...
Click to collapse
Could it be that it has overseas firmware, I read in a two or three year old post that this can happen but there was a way to get around this.
PD
pdonahue said:
Could it be that it has overseas firmware, I read in a two or three year old post that this can happen but there was a way to get around this.
PD
Click to expand...
Click to collapse
So...Did you try flashing kdz file and updating it that way or ... ?
pdonahue said:
I have just managed to root my old LG P880/4xHD using advice from this forum. Thought I would try on an old phone first. One reason I tried is because I cannot update Android via the usual About phone, Software updates, Check now for updates. The Android version installed is 4.0.3. I am in Australia and it is possible the phone is an overseas model (got it from a friend in LG). Has "Not for Resale" stamped inside the back cover. When I try to update Android, I get an error message "Registered Error - Your device is not registered yet." I had hoped rooting would get around this but it hasn't. Have looked up old forum posts and there is talk of using .kdz files and all sorts of other things. Can anyone help me get around this registration issue but please be aware I am a novice and most of the older posts I read, I couldn't understand so simple explanations please. Thanks.
Click to expand...
Click to collapse
Its a year old phone, its not like its the nexus one or samsng galaxy s2...
Try flashing 4.12 with kdz. Google is your friend, try kdz flash 4.1.2 Optimus 4x hd.
Funny thing, when I bought my phone, only google asked me to register the phone, the usual Google Play thing. SO what do you exactly mean with REGISTER?
i think the whole phone isn't registred by LG for consumers, like dimi89 said it has to be a dev device. they aren't registred and cannot be updated/used the normal way. the serial number of this phone isn't present in the LG databases i think. Just flash kdz and everything is fine. You know that you don't get any support or warranty on that phone but you should know that.
Greetings everyone!
Few weeks ago, I gave my device to a friend of mine to manually update it. Something went wrong so he decided not to go any further. Yday i tried to "Factory reset", after reset some error pop'd in the left upper corner of the phone.It says:
[LGE_SECURITY] ERROR: boot image signature
Critical failure: Unable to start kernel.
Unrecoverable bootloader error (0x00000002).
Anyone had any similiar or even the same problem as i am facing right now? Thanks in advance.
best regards, Milan
Guy didn't know what he was doing apparently. Your handset is still locked and he apparently tried installing a 3rd party ROM, lemme guess, you wanted a newer version of Android than 4.1., which is a reasonable enough thing. Problem is that out of the box you can't do that because it only boots images signed by LG and they abandoned development after releasing 4.1 and a couple of minor point releases. You aren't totally screwed but if you were having somebody else do it for you, you might need to get some help. You can find the details elsewhere here, or more likely point a more skilled friend at it, but here it is in a nutshell.
You need to get LG's official updating software (from the LG website) and you need to fiddle with it a bit until you get it to do a rescue because it expects to have already paired up with the phone while it was still working. If you already had it installed, great because it will make it easier. Anyway, you will probably have to manually pick your model and input the IMEI since it won't already know those things and it will go out and fetch the most recent image. You will push VOL Down and insert the USB cable from a powered down state, it will then do the rest. Good chance you will even retain your data unless that 'factory reset' you mention actually succeeded.
Of course that will only get you back to stock 4.1. Read around for the official way and several un-official ways to unlock your boot loader. Once that is done you can install a better recovery and then a newer version of Android. But the first step is to restore the stock software since you have to have a running phone to be able to unlock it.
And no, nobody has ever been able to explain WHY they lock them, but every single manufacturer seems determined to do it, chipmakers put a lot of work and ad copy into how extensive and unbreakable the locks on their newest chip is, etc. And then they either bow to customer demand and add an unlock feature or we here at xda do it for them... as a courtesy of course. Truly we do live in the asylum. Wonko the Sane was onto something.
My phone was bricked and I restored it following this tut ( http://forum.xda-developers.com/showpost.php?p=62405939&postcount=138 ). Now the phone is turned on normally, but I have this strange thing:
My phone number
Unknown
IMEI
0
IMEI SV
00
I have also this warning: Current version is not available for user. Can't find matched cust for NT-code mcc/mnc, subset.
How to fix?
BlackStorm94 said:
My phone was bricked and I restored it following this tut ( http://forum.xda-developers.com/showpost.php?p=62405939&postcount=138 ). Now the phone is turned on normally, but I have this strange thing:
My phone number
Unknown
IMEI
0
IMEI SV
00
I have also this warning: Current version is not available for user. Can't find matched cust for NT-code mcc/mnc, subset.
How to fix?
Click to expand...
Click to collapse
Same thing happened to me after I unbricked my device using the exact same tutorial. However, even with IMEI 0 I can still make and receive calls and text messages. But I'm not sure if I should leave my device like this. If someone has any solution to provide I would be very grateful! I hope it doesn't involve flashing any ROM again cause I'm really afraid that I may brick my phone again ...
Hey guys, I had exactly the same problem. I tried different things including flashing various Roms and Bootstack, but nothing seemed to work. Since I’ve been searching for a solution quite a while, I now have the honor to help you out and everyone with an L90, who stumbles upon the same issue.
First of all, I made a backup of my EFS, so that I could restore the state my phone was in (IMEI=0, but working baseband). You can do that easily with TWRP (thx to shoxxy . By the way, this is something which we all should have done beforehand. It would have been much easier to restore our IMEIs.
But don’t worry, if you follow the instructions in this video (https://www.youtube.com/watch?v=nwzgs1Cmr9k) you should be able to get your IMEI working again. For those, who feel more comfortable following written instructions I copied the following procedure using this thread (http://forum.xda-developers.com/showthread.php?t=1960918) as a model and edited them a little to the way it just worked for me.
Do this on your own responsibility! And better double-check with the video our other threads.
Before you start:
Download this package (http://www.mediafire.com/download/figdbxb75j5kyry/package.rar), it belongs to the user who made the video on youtube (PremiumRepair).
Make sure your phone is rooted and USB-Debugging is enabled (http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951)
Procedure :
Install Drivers. Either you use LG Support Tool or download them directly. For me the LGUnitedMobileDriver+3.14.1_ML_WHQL.exe worked just fine. Don’t forget to uninstall old drivers or you could run into problems.
Install QPST v2.7.378. Microsoft Visual C++ 2005 Redistributable is a prerequisite, just confirm it.
Plug your device into your PC (USB port)
Run QPST Configuration from your Windows Start menu. Switch to the second tab ("Ports") and choose "Add new port" (bottom left button). You should see a COM port associated with "USB/QD Diagnostic". Select it, then press Ok. You can close the QPST Configuration window now.
Open Windows Explorer and browse to "C:\Program Files\Qualcomm\QPST\bin" (or wherever you installed QPST) and launch RF_NV_Manager.exe. In RF NV Manager, Go to "Settings / Comport". You should see your COM port in the dropdown box. Select it, then press OK.
Go to "File" and choose "Read from phone". RF NV Manager will read all NV items from the phone. Now if you see item #550, you will be able to alter it (see below). If you can’t find it, go to “File” and choose “Read supported RF NV Items”. If you still can't find it, there is a way to create it. Take a look at the thread I linked to.
Now comes the critical step of altering the IMEI. Select item #550 and you'll see 9 boxes on the right, a "Write NV" button and an "Hex" checkbox. Check the "Hex" checkbox.
Now, you'll have to enter the IMEI in the 9 boxes in a very specific way. The easiest way is to use the IMEI converter (for other method see linked thread). Put your IMEI in, convert it and put the digits in the boxes (two number per box).
Now you can then press "Write NV" to write the IMEI value to your phone.
Once done, unplug the device, and reboot it. Now you IMEI should be changed. If it’s not your number, take a look at the step seven again and check the video.
Please give a feedback, if it worked for you (incl. Details about your device, ROM, etc.) so that other users can profit from it. Thanks
Edit: @ BlackStorm94 - Don't worry about the warning. It will vanish if you install a different ROM.
I'm stuck at step 6. When I click Read From Phone, I get an error which says that my phone is not present. Also, on QPST Configuration, even tho I have set the Port to the one my phone appears, under Phone it says No Phone ... I guess my phone isn't recognized for some reason. Do I need to root it before I do this? I hope not because I don't really want to mess with it after the hard brick
Lazgeor said:
I'm stuck at step 6. When I click Read From Phone, I get an error which says that my phone is not present. Also, on QPST Configuration, even tho I have set the Port to the one my phone appears, under Phone it says No Phone ... I guess my phone isn't recognized for some reason. Do I need to root it before I do this? I hope not because I don't really want to mess with it after the hard brick
Click to expand...
Click to collapse
Yes, your phone needs to be rooted. This solution for rooting works great for me: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
mhikel said:
Yes, your phone needs to be rooted. This solution for rooting works great for me: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Click to expand...
Click to collapse
So, I rooted the phone successfully, but the phone is still not recognized by QPST Configuration or RF NV Manager. My pc recognizes the phone and I can do everything properly, but these programs say that there is No Phone ... I don't know what to do ...
mhh, that sounds like a problem with the drivers. Did you uninstall all the drivers (incl. Qualcomm drivers) from your PC? And have you installed the official LG drivers for our devices (for example from the link in this post: http://forum.xda-developers.com/showpost.php?p=62405939&postcount=138) Try another PC if it still doesn't work
mhikel said:
mhh, that sounds like a problem with the drivers. Did you uninstall all the drivers (incl. Qualcomm drivers) from your PC? And have you installed the official LG drivers for our devices (for example from the link in this post: http://forum.xda-developers.com/showpost.php?p=62405939&postcount=138) Try another PC if it still doesn't work
Click to expand...
Click to collapse
I'm going to try on a new computer tomorrow afternoon and I'll let you know how it went. I uninstalled all drivers associated with my phone on my computer and after reinstalling them I still got no results. I guess I may have confused it So that's why I'll try on a new one. Thanks for your help
Hello, sorry for the late reply. I just wanted you to know that even though I tried with another computer, my phone was still not recognizable. It doesn't really matter tho, cause even with the IMEI 0 I still have service and it works normaly for about a month now. If you have any solution then I would like to try it, but if not then it's okay. Thanks for your time
No worries! You do have USB-Debugging enabled, have you!? I mean you probably needed to do this for rooting. But if you haven't done it yet, that's probably the problem. Enable USB-Debugging like this (Go to Settings > General > About phone > Software information, tap Build number seven times and then go to Settings > Developer options and turn on Usb debugging) (copied from http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951)
[/COLOR]
mhikel said:
No worries! You do have USB-Debugging enabled, have you!? I mean you probably needed to do this for rooting. But if you haven't done it yet, that's probably the problem. Enable USB-Debugging like this (Go to Settings > General > About phone > Software information, tap Build number seven times and then go to Settings > Developer options and turn on Usb debugging) (copied from http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951)
Click to expand...
Click to collapse
Yeah yeah, I had USB Debugging enabled every time I plugged my phone into both of my PCs. But I don't think that's the reason this tutorial isn't working on my phone. When I unbricked the device, I had to use the L90 D405 loader.img in order to reflash the bootloader and recovery. But my phone is the d405n model, and that's the ROM I installed to it. So the phone now thinks that it is the D405 but the ROM I have installed is the one for d405n. I hope you understood this cause I know it's a bit weird I see options to activate NFC but I never use it so I can't tell you if it works. However I can activate it properly. Anyway, about the IMEI, as I told you, it basically works without problems even with 0 because I think that my service provider doesn't block anybody except someone reports the device as stolen. If you have any further solutions then let me know but if not the don't worry, I'm okay!
Lazgeor said:
But my phone is the d405n model, and that's the ROM I installed to it. So the phone now thinks that it is the D405 but the ROM I have installed is the one for d405n.
Click to expand...
Click to collapse
Ah, that makes sense. Flashing the right bootstack as described here (http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632) could maybe help you (I haven't tried the one for D405n myself but it's supposed to stable). On the other hand: You probably installed a .kdz (ROM) with the correct Bootstack for your D405n included. ...So I don't think it'll bring back the IMEI or change anything. I'm running out of ideas, sry!
mhikel said:
Ah, that makes sense. Flashing the right bootstack as described here (http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632) could maybe help you (I haven't tried the one for D405n myself but it's supposed to stable). On the other hand: You probably installed a .kdz (ROM) with the correct Bootstack for your D405n included. ...So I don't think it'll bring back the IMEI or change anything. I'm running out of ideas, sry!
Click to expand...
Click to collapse
It's okay I don't want to bother you any further. I'll buy a new phone soon anyways and since I'll give this one to my small brother, I don't think he'll really worry if his IMEI is 0 If at some point this device gets blocked by a service provider then I'll start searching for ways to fix it again. That bootstack page you mentioned seems useful. I'll try that if I do have any problems. Thank you very much for your help
That sounds reasonable! You are really welcome If you still need help just post here again. Although I have no other ideas at the moment someone else might. If you felt supported here I'd really appreciate the thanks! button. Yeah, you are right, the bootstacks supplied by Xemidra are of great value for our LG L90.
mhikel said:
That sounds reasonable! You are really welcome If you still need help just post here again. Although I have no other ideas at the moment someone else might. If you felt supported here I'd really appreciate the thanks! button. Yeah, you are right, the bootstacks supplied by Xemidra are of great value for our LG L90.
Click to expand...
Click to collapse
Update: I actually fixed it I know I told you that I would leave it as it is for now, but today I had nothing to do, so I decided to try my best and fix it. What I did was, as the post you told me said, I had to install the Kit Kat bootstack and the easiest way to do that is by flashing the Kit Kat rom. So I downgraded to android 4.4.2 using the stock rom I found on another post, and then I used your tutorial on the Kit Kat version. This time I was able to pass step 6 because my phone was getting recognized properly. I also didn't needed root access after all, since the new rom was just installed and it worked. After finishing the tutorial and restarting the phone, my IMEI was back! Then I upgrated my phone to the lollipop version, and when the upgrade finished, my IMEI was still there. So now I'm in lollipop with a working IMEI. I'm so thankful to you now, thank you very much for helping me and providing me these useful tutorials. I really appreciate it
Wow, that's just great!=) congratulations, you can be proud! Happy for you, that was quite an issue. You are welcome=) Well, someone from this forum helped me out, when I seeked for help and I am happy to give something back. Thank you for sharing your solution! That should be helpful for the next one stumbling over this problem. Enjoy your completely restored phone!=)
I have read through many posts here in the forum, where I got some tips that I have tried, but nothing that totally applied to my problem, only parts of it. I have upgraded my phone with every firmware of the Open_EU since January 2020 without any problem using LGUP. Last time I upgraded to Android 10 in August, it was also successful but then check nt-code: 222201: ff started to appear everytime I turned on the phone. It's annoying, but not a big problem since the phone works perfect. However I tried to upgrade to Android 10 v405ebw30c recently, and now LGUP can't make the upgrade, it says can't cross-DL, with a strange message judypn_lao_eea ->judypn_lao_com. Could the NT-code be the cause of this? I also tried to enter the hidden menu, *#546368#*405# and I can see the nt code, but I can't change it. Nothing happens. Will I have to root my phone to make this work? or are there other options?
Some history, this phone doesn't officially exist in Sweden, where I live. However, it's possible to buy it anyway. It was sold as brand new and unlocked. The first week I discovered that I couldn't make the officially update . Then I found out it's originally italian (TIM), and probably someone that unlocked afterwards. But maybe not properly made since it was problem to make upgrades with LG Bridge. And when I succefully managed to make the upgrade with LGUP I decided to keep the phone anyway, because I liked it too much. But since this NT code started to appear after the Android 10 upgrade, I wondered if maybe there's some "leftovers" from TIM italy. So is rooting the only option for me? Except for the upgrade problems it works perfect every day.
suain81 said:
I have read through many posts here in the forum, where I got some tips that I have tried, but nothing that totally applied to my problem, only parts of it. I have upgraded my phone with every firmware of the Open_EU since January 2020 without any problem using LGUP. Last time I upgraded to Android 10 in August, it was also successful but then check nt-code: 222201: ff started to appear everytime I turned on the phone. It's annoying, but not a big problem since the phone works perfect. However I tried to upgrade to Android 10 v405ebw30c recently, and now LGUP can't make the upgrade, it says can't cross-DL, with a strange message judypn_lao_eea ->judypn_lao_com. Could the NT-code be the cause of this? I also tried to enter the hidden menu, *#546368#*405# and I can see the nt code, but I can't change it. Nothing happens. Will I have to root my phone to make this work? or are there other options?
Some history, this phone doesn't officially exist in Sweden, where I live. However, it's possible to buy it anyway. It was sold as brand new and unlocked. The first week I discovered that I couldn't make the officially update . Then I found out it's originally italian (TIM), and probably someone that unlocked afterwards. But maybe not properly made since it was problem to make upgrades with LG Bridge. And when I succefully managed to make the upgrade with LGUP I decided to keep the phone anyway, because I liked it too much. But since this NT code started to appear after the Android 10 upgrade, I wondered if maybe there's some "leftovers" from TIM italy. So is rooting the only option for me? Except for the upgrade problems it works perfect every day.
Click to expand...
Click to collapse
I'm not sure, but worth a try,I warn the site is Russian, here's how to edit NT code https://4pda.ru/forum/index.php?showtopic=951883&view=findpost&p=100635159 here is a list of NT codes:View attachment NT_code.txtunfortunately needed root!working with QFIL do backup ftm.bin!
lexih said:
I'm not sure, but worth a try,I warn the site is Russian, here's how to edit NT code here is a list of NT codes:View attachment 5134107unfortunately needed root!
Click to expand...
Click to collapse
Thank you for your reply. Yes, I have read many instructions even on this page how to edit, cust_path_mapping.cfg, and that it's surely easy once the phone is rooted. But that's why I first wanted to see the possibilities to do this without that I have to root the phone.
suain81 said:
I have read through many posts here in the forum, where I got some tips that I have tried, but nothing that totally applied to my problem, only parts of it. I have upgraded my phone with every firmware of the Open_EU since January 2020 without any problem using LGUP. Last time I upgraded to Android 10 in August, it was also successful but then check nt-code: 222201: ff started to appear everytime I turned on the phone. It's annoying, but not a big problem since the phone works perfect. However I tried to upgrade to Android 10 v405ebw30c recently, and now LGUP can't make the upgrade, it says can't cross-DL, with a strange message judypn_lao_eea ->judypn_lao_com. Could the NT-code be the cause of this? I also tried to enter the hidden menu, *#546368#*405# and I can see the nt code, but I can't change it. Nothing happens. Will I have to root my phone to make this work? or are there other options?
Some history, this phone doesn't officially exist in Sweden, where I live. However, it's possible to buy it anyway. It was sold as brand new and unlocked. The first week I discovered that I couldn't make the officially update . Then I found out it's originally italian (TIM), and probably someone that unlocked afterwards. But maybe not properly made since it was problem to make upgrades with LG Bridge. And when I succefully managed to make the upgrade with LGUP I decided to keep the phone anyway, because I liked it too much. But since this NT code started to appear after the Android 10 upgrade, I wondered if maybe there's some "leftovers" from TIM italy. So is rooting the only option for me? Except for the upgrade problems it works perfect every day.
Click to expand...
Click to collapse
So, u have 2 problems right? u want to upgrade to v405ebw30c, but can't, and you also have the nt-code error right?
First, no, they aren't related. I think that's highly unlikely. That's not something lgup checks for. I'd bet you're using the 1.14 version dll and should be using the 1.16 dll and should be doing a refurbish.
As far as the nt-code error. It's a pain, lots and lots of info about fixing it, most of them need root. But here's what worked for me, no root needed: I switched from att pie to Korean open Q (first time had the nt-error and no editing anything would fix it), so went back to att and then did the korean 409N again, first with partition DL. Let that finish, it has to reboot the phone completely to finish. Then, don't change the phone in anyway, just shut it off. Back to LGUP and do a Refurbish with the same kdz.
No more nt-error code. It *seems* that nt-error code info gets propagated to various partitions as a part of refurbish. I verified that the ftm partition, where that information lives, was completely spaces (blank) after the refurbish... it's odd, I know. But for whatever reason, I no longer have the nt-error code problem.
cheers
AsItLies said:
So, u have 2 problems right? u want to upgrade to v405ebw30c, but can't, and you also have the nt-code error right?
First, no, they aren't related. I think that's highly unlikely. That's not something lgup checks for. I'd bet you're using the 1.14 version dll and should be using the 1.16 dll and should be doing a refurbish.
As far as the nt-code error. It's a pain, lots and lots of info about fixing it, most of them need root. But here's what worked for me, no root needed: I switched from att pie to Korean open Q (first time had the nt-error and no editing anything would fix it), so went back to att and then did the korean 409N again, first with partition DL. Let that finish, it has to reboot the phone completely to finish. Then, don't change the phone in anyway, just shut it off. Back to LGUP and do a Refurbish with the same kdz.
No more nt-error code. It *seems* that nt-error code info gets propagated to various partitions as a part of refurbish. I verified that the ftm partition, where that information lives, was completely spaces (blank) after the refurbish... it's odd, I know. But for whatever reason, I no longer have the nt-error code problem.
cheers
Click to expand...
Click to collapse
Thank you for your reply. No I don't know if they're related either, it was just a guess since the problems started at the same time. Well, I always had a kind of "problem" since I never have been able to upgrade from LG Bridge. And that I guess is from the NT-code. But the sign in the start appeared after the Android 10 upgrade. However, I'm using LGUP 1.16.0.3 and I have used it everytime, with DLL version 1.9.39.7.
And actually it wouldn't bother me too much having this sign in the start anyway, I only restart the phone like once per week. But of course it bothers me that I can't make the upgrade like before. And I can also mention that I have never tried to refurbish with LGUP, only upgrades, because I have some bank apps etc. that are a bit complicated to reinstall. Of course it's possible, but I have to be mentally prepared for it. So I'll only do that when I know there's no other option. And the phone work good today, so I'm not in a rush, but in a couple of months I should be doing an upgrade of course.
And thanks for telling me the other option too, I will surely try it one day but since it also requires refurbish I will try after I fail to make the normal refurbish.
I don't have any experience of rooting, if I root my phone, will I keep all the data or is it comparable to refurbish? Are the any other risks rooting the phone? I'll lose the warranty, but I don't really have the warranty anyway since it's not an official product in my country.
suain81 said:
I don't have any experience of rooting, if I root my phone, will I keep all the data or is it comparable to refurbish? Are the any other risks rooting the phone? I'll lose the warranty, but I don't really have the warranty anyway since it's not an official product in my country.
Click to expand...
Click to collapse
No, to root, you loose all data and have to start again. Part of rooting is to flash dm-verity which turns off encryption. But, that allows you to do a backup of the data partition once you've reinstalled everything. The positive side there is that in the future, you could back up that partition (data), make any other changes, then flash data back, and your apps would be back as they were.
Other risks? Well, maybe, if the phone was stolen I guess, it would be easier for someone to steal your data. Your situation, with serious banking apps, it **may be** you don't want that risk...
Maybe for just trying a refurb to lose nt-code, look at LG's 'restore' from previous device ability, use it to save off the apps somewhere, then restore after refurb? no root needed.
cheers