Olympus Unofficial OmniROM 4.4.4 PREVIEW test
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth (Instable)
sound
wifi
need more testing...
WHAT ISN'T WORKING?
need more testing...
Battery statistics 100% Unknown
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM：The new
Wait until the restoration of some of the other bug, hope to help test.
ROM：201408062225
<s>http://d-h.st/iq6 </s>
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
I'm fixing the digitizer of my second atrix, definitely i'm going to test it and help you with logs. Keep on the good work.
Best regards.
fengyr said:
Olympus Unofficial OmniROM PREVIEW test
This is a development thread .
This is a Omni4.4.4 firmware for Atrix. It's not a official Omni.
Quote:
Disclaimer: THIS FIRMWARE IS IN ALPHA STAGE OF DEVELOPMENT.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
This ROM uses the kernel 3.1.10, from Olympus Kernel Project:http://forum.xda-developers.com/showthread.php?t=2016837
WHAT IS WORKING?
ART
Bluetooth
need more testing...
WHAT ISN'T WORKING?
WIFI (Unable to search)
Audio
need more testing...
recovery(Thank Zn7mkUKzN1r8aCIV):
http://forum.xda-developers.com/showthread.php?t=2613829
ROM:http://d-h.st/Dgo
Requirements:
Clockworkmod or compatible recovery
Atrix 4G with unlocked bootloader
WARNING: I DECLINE ANY RESPONSIBILITY IN DAMAGING YOUR PHONE. YOU ASSUME ALL RISKS IN ANY PROCESS DESCRIBED ON THIS PAGE.
Thanks to all the users for using and debugging.report all bugs here,Thank
Click to expand...
Click to collapse
Way cool, will backup can test what's listed as working and see if i can find more of what's not working.
Thanks
Has changed the default language en_US.Update rom url
Not bad!
So I gave this test ROM a try. It's nice to see KitKat running on an Atrix 4G! I'm so excited to see some progress!
However, there are definitely several issues with it. The problems I found are:
Calls/text doesn't work
Mobile data doesn't work (says AT&T 4G but no connection)
SuperSU doesn't appear to work (crashed when opening and wouldn't let an app have root access)
Bluetooth didn't turn on for me (but I see you seemed to get it working, maybe it was just bad luck)
No WIFI (doesn't scan as you stated in the post)
Couldn't test any apps or camera because I couldn't restore my apps without root, and the camera must be a part of gapps now, which I also didn't install.
I was also gonna post some screenshots but it wouldn't let me snapshot (said storage error?)
Just thought I would sum up my experience so far. Thanks for letting us test out this promising new ROM! :good:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
K's kernels are CM9 and CM10.1 based. This is a CM11 based kernel with a build date of 6 Aug 14
Calls - No go
BT (file transfer) - Go
Wifi - same as OP reported
Battery - same as OP reported (There's no way that after 8 hrs it should still be at 100%)
Speakers/Headphones - No go
Apollo/DSP Manager - Crash
Ravilov's Battery Fix app - scripts not able to be executed
Thanks!!!
Mobile data seems to be working, Bluetooth and superuser. ART included, I'll do more testing later.
thank for the rom!
thecjan said:
why need to test this ROM if K did not update his kernel from GitHub? had all same issues isn't it?
Click to expand...
Click to collapse
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Zn7mkUKzN1r8aCIV said:
Don't be harsh to K, as I was fixing audio segfault in CM 4.4.4, the more I realized most of the audio problem (like Skype, Bluetooth error) is more ROM related than Kernal related. Most of them are due to incompatiblity of hardware HAL files in our unfinished Moto's 4.0 rom...... Of course Mobile Data HAL is sill PAIN IN THE AXX... ...
Click to expand...
Click to collapse
And what about to use - for now - the old kernel like epinter's CM10?, in XOOM kitkat they use and old 2.x kernel too, the hardware acceleration its not really a problem compared to use and unfinished kernel with more issues to solve.
Anyway we agree that Kristianp is doing it's best work to continue developing the 3.1 kernel, so any negative comentary should not be allowed as most of us are only users and some cooperate with minimal things.
I could boot my second atrix, now time to BL Unlock, root, etc and it's ready to test some KK roms.
It's great to see the "4.4.4" in the settings
Mobile internet works fine.
Kitkat feels quite snappy on this "too old, too slow" hardware.
Thank you so much for keeping the Atrix alive.
Will try to install the Play Store and test out some apps!
cannot wait to try this!
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
phoenixgfx said:
Booted up fine and looks slick. had to do some searching around to find how to switch to ART.
Also had to use Z's recovery_4.3.img... ROM won't install with TWRP.
Wish I could do more testing like battery but it's not feasible at the moment.
Looking forward to other releases to test.
Really love the tons of options available in KK.
Click to expand...
Click to collapse
Which version of TWRP?
palmbeach05 said:
Which version of TWRP?
Click to expand...
Click to collapse
I think 2.6... not so sure.
TWRP 2.6.3 gives errors and aborts installation.
phoenixgfx said:
I think 2.6... not so sure.
Click to expand...
Click to collapse
Basmatek said:
TWRP 2.6.3 gives errors and aborts installation.
Click to expand...
Click to collapse
I believe, based off of what i've seen, 2.6.3.0 is the minimum to flash 4.4 ROMs, but 2.7 is reccommended.
Sent from my MB886 using xda app-developers app
There's no 2.7 for Atrix and apparently there's also no 4ext Recovery, so the only ways are CWM or Z's recovery (will try Z's on Monday or Tuesday)
Sent from my Nexus 7 using XDA Free mobile app
Thank friends test feedback .
Apply a new job,computer is not in my city, so the update rate slow down (my technique is limited).
I look forward to Z 4.4.4
please forgive my terrible english.
Please upload it to a diferrent pleace
Related
Hello everyone,
as the old KANG build that got posted here is very old I've decided to compile my own builds.
As many people demanded a newer build you can use mine.
Flashing this may brick your device and there is no support from either Cyanogen and his crew or me. You do this on your own responsibility.
This build is not final - it's more an alpha build. If you decide to use it you shouldn't care about bugs.
I'll keep posting updates every day (if there is any reason for it). There will be no guaranteed support and I won't add user-specific features for anyone.
This is not my work - it's mostly from Pershoot & Cyanogen. This build uses Pershoot's GitHub as base for the device.
If you like the builds you're welcome to donate for some Club Mate / Beer and new hardware.
Works:
WiFi works
No more SOD or display flickering
Buttery smooth
HQ Videoplayback
USB Transfer - use the MTP mode and stop complaining about ICS
Doesn't work:
Camera doesn't work
I will not provide detailed Changelogs. Read CM9 Gerrit ICS & P4Wifi for that.
You can find the official app in the Android Market for 1 €:
https://market.android.com/details?id=de.messerschmidt.tabkang
It supports direct reboot (normal and into the recovery) and downloading the newest rom (incl. version-check) from my private FTP.
GAPPS (4.0.4):
http://dev-host.org/8Re
Voice Search Fix:
http://forum.xda-developers.com/showpost.php?p=21745603&postcount=1
Builds:
03/04/12
http://dev-host.org/kfz MD5: 7ef460037f4dd4378cfefb43258e315a
02/29/12
http://dev-host.org/fDR MD5: b759b43b1a5ac670f8ac316f1e9b43c7
02/12/12
http://dev-host.org/NKf MD5: 57da37ec78f3e02eeef0e7cd7672c396
02/08/12
http://dev-host.org/JLT MD5: 78e78cbb31664645627245276d6f02d3
02/03/12
http://dev-host.org/a7m
Installation:
Flash CWM if you've got none (I'm using the Overcome one)
Backup your current build
Wipe data
Flash my build
Flash the Gapps
Reboot (may take a few minutes)
Enjoy
USB MTP:
As some people requested me to do a little How-to for enabling MTP-mode:
Go into the settings
Choose storage
Tap the 3 dots in the upper right (menu)
Choose "USB computer connection"
Check "Media device (MTP)"
Done
Notice:
This is a pure Android rom and no Samsung rom. There won't be any unneeded additions like TouchWiz, My Files, or whatever.
Look in the Market for other/better apps if you're seriously missing something. I won't any additions/apps/whatever to this rom except I want to use it myself (not gonna happen).
Videos (made by qbking77):
How to Install:
http://www.youtube.com/watch?v=qcvfmnJdxdQ
Review:
http://www.youtube.com/watch?v=7m54DQ0Sqm8
downloading this right now, thank you
Any noticeable differences?
Ghost114 said:
Any noticeable differences?
Click to expand...
Click to collapse
Just bug fixes, I think. I'm downloading now, so I'll report back later.
Installed and booted fine. Testing now, report back later.
new boot animation?
Sent from my SGH-I997 using Tapatalk
why didnt he mention the difference between this build and the other one ? oh well thx anyway.
theROMinator said:
new boot animation?
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
No, but is that the first thing you think of when a new CM9 build is posted? Well, we are all diffrent
tarekkkkk said:
why didnt he mention the difference between this build and the other one ? oh well thx anyway.
Click to expand...
Click to collapse
Because I don't know when he built his build?
The display isn't flickering anymore and I didn't get any SODs anymore.
How suitable for everyday use is this build, beside of the above mentioned issues?
Gonna go ahead and subscribe to this and see what issues there are.
Not sure how much longer I can hold out for official CM9/ICS.
Murmel2k said:
How suitable for everyday use is this build, beside of the above mentioned issues?
Click to expand...
Click to collapse
Now that the flickering is fixed and SOD, I'd say it's well suited for daily use.
P.S. It also seems to be alot smoother, and you now get Terbuchet settings. Only thing missing for me is the camera.
is it safe to overinstall over DaAwesome1's ICS Kang, or must I wipe?
Does anyone know please, whether the cm9 kernal supports undervolting?
got556 said:
Gonna go ahead and subscribe to this and see what issues there are.
Not sure how much longer I can hold out for official CM9/ICS.
Click to expand...
Click to collapse
Ditto: well, I think I'll only hold out log enough to get my tablet charged.
danielsf said:
Does anyone know please, whether the cm9 kernal supports undervolting?
Click to expand...
Click to collapse
I was able to install setcpu and set the clock speed with the first ICS Kang
Beakerzor said:
is it safe to overinstall over DaAwesome1's ICS Kang, or must I wipe?
Click to expand...
Click to collapse
Basically a wipe shouldnt be needed. Test share your experience.
Does Netflix work? I'm this close to jumping on this.
This is just a whole new CM9 from the build posted earlier. The old build worked very smooth, as long as you didnt fill it with lots of user apps and widgets then it became very laggy. I have now restored all my apps 250+ and its still silky smooth, i have widgets with sync on several windows and app shortcuts and it still behaves as if it where just installed (empty). this sure gives hope for our tab. Go CM Team and thanks to OP for posting this build.
This build is an improvement over the prior kang, seems the CM team has been busy over the holidays. Smoother UI, screen flickers are gone, definite daily driver material. Will report back if I run into any problems.
FLASHING ROMS WILL VOID YOUR WARRANTY AND COULD POTENTIALLY DAMAGE YOUR PHONE -- WHILE I MAKE EVERY ATTEMPT NOT TO LET THIS HAPPEN, IT'S STILL A RISK THAT YOU'RE TAKING. IF SOMETHING BAD SHOULD HAPPEN TO YOUR PHONE, PLEASE DON'T BLAME ME -- HENCE THIS WARNING.
-Hashcode {06-21-12}
This isn't so much a ROM announcement as it is a direction to find the unofficial nightly builds of CM9 Kexec for the Droid 4.
Prerequisites:
- Rooted
- Running ICS OTA or .217 leak (they are the same)
- SafeStrap 2.11 Here's how to use Safestrap
Download SafeStrap here
SafeStrap Mirror 1 (v2.11)
Download ROM here
ROM Mirror 1 (8/20 build)
Download ICS GApps Here (04/29 build)
ICS GApps Mirror 1 (04/29 build)
FLASH THE GAPPS.ZIP FILE AFTER YOU FLASH THE ROM .ZIP
Directions:
1. Root your stock system
2. Install SafeStrap 2.10+ (for Kexec support)
3. Backup stock system
4. Toggle to SAFE system (safe to screw things up!)
5. Flash the ROM .zip like any other ROM
6. Flash the GApps .zip
7. Reboot and enjoy!
What works?
4G data and calls
Flash (HW Codecs?)
Wifi
SMS and MMS
Whats broken?
Audio while bluetooth is left on and disconnected.
Built-in wifi tether.
Camera (front and back)
USB Audio (Car Dock audio connection)
Touchscreen is finnicky.
Specs:
Kernel 3.0.31
Latest Gfx drivers from TI
CM9
Android 4.0.4 ICS
Screenshots:
Surely you have seen CM9 before?
Thread on ROMBOT.ORG (hashcode's forum)
I don't have any problems with the touchscreen, but the clock is sometimes right and sometimes wrong. On Twitter Hash says he is already working on a fix for the clock.
Very promising. Seems a bit odd to me that anyone is spending time using 3.0.x for a custom kernel; we already have 3.4 on XDAndroid and those are *winmo6* phones originally...
all the links are dead
Here is Safestrap 2.11 http://db.tt/f1xwjL86
Droid 4 - AOKP K1L0
DevilDaHusky said:
all the links are dead
Click to expand...
Click to collapse
Added links to OP.
cron666 said:
Added links to OP.
Click to expand...
Click to collapse
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
azrael293 said:
any way to get a list of changes with the builds/nightlies as they change since the forum is down?
Click to expand...
Click to collapse
the forum and files are on the same host, thats where the changes and nightlies come from.
unless the host gets fixed, we have no more nightlies and no changelogs.
that is, unless there was another nightly and someone has it, then they can post it here and I'll modify OP,
or they can send me a link:
cron410 at google mail
The maserati builds are not up there yet but, rombitch.com appears to be the successor to rombot
EDIT: First cm9 kexec build is up there now!
Sent from my DROID4 using xda premium
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
DarkMidnight said:
I think that website just became my new favorite site.
In all seriousness, for how locked down the Droid 4 is, I'm very impressed how far development has come along for it. I'm very excited to see what comes down the pipe as far as CM9 and CM10 are concerned.
Click to expand...
Click to collapse
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
rumgool said:
Actually, Hashcode just released a new kexec build this morning, although it does not boot, it is CM10! It looks like he will be using his blog site to host future downloads. Here's a link:
http://dl.hash-of-codes.com/ROMs
Click to expand...
Click to collapse
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
kwyrt said:
Boots fine for me. Menu, Home, Back, and Search buttons don't work though. It is a kexec build so make sure you are on the latest safestrap recovery version 2.11. Also, you'll need to flash the CM10 gapps: http://goo.im/gapps. Looks like hashcode is making some progress!
Click to expand...
Click to collapse
Awesome, I honestly did not even try it, I was just reiterating what Hashcode said on twitter. Flashing now!!!
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
olegfusion said:
The best thing in our current cm10 - the backlight of hardware keyboard doesn't stay turned on when you don't use it!
Click to expand...
Click to collapse
Lol
Sent from my XT894 using Tapatalk 2
Hashcode said:
Lol
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
NO laugh It's truth (for me) :laugh:
Hoping on keep once cm10 on my droid 4 as main rom
In the op it says flash doesn't work. I thought flash wasn't intended to work in jb, that adobe said no more after ics?
Personally I think flash runs great on my d4 but adobe says it doesn't so we have to listen to them since they know what we want.
Sent from my XT894 using Tapatalk 2
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
podspi said:
Button savior works to make this (kind) useful. Once the soft-buttons and camera are working, will there by anything that DOESN'T work?
This is really, really awesome
Click to expand...
Click to collapse
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
rumgool said:
Just an FYI on the latest release:
Capacitive buttons are working in Hashcode's latest alpha for JB. However, data is pretty iffy. I do not get any type of data connection, so there is not much I can test at this point. Wifi does not work at all as far as I can tell.
I also assume the camera is not working, based on the fact there is no camera app.
As far as the UI is concerned, it seems pretty smooth.
Looks promising!
Click to expand...
Click to collapse
wifi is because probably forgot module replacing for new kernel. I'll check this out little later
Q&A for [KERNEL][AOSP 4.4.4|CAF][UNIFIED ghost | moto_msm8960dt][TDHK 10/05/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
So this won't work with vzw xt1060 stock rom unlocked BL?
Nope..its made for aosp Roms based off of CM
Sent from my Nexus 7 using XDA Free mobile app
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
AnshRosenberg said:
When install de kernel, aptoide doesn't work anymore... I try to open and then close alone. Sorry for my english. I use de liquid ROM and work fine with default kernel, but i flash this and doesn't work anymore.
Click to expand...
Click to collapse
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
tdhite said:
Did you get this fixed up. If not I'll get you set. A great many people are using the kernel across a lot of ROMS so likely it'll work.
Click to expand...
Click to collapse
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
AnshRosenberg said:
I had to install a nandroid of the ROM I was using, to get back to the old kernel . yet still not work for me the Aptoide when you used to and is giving me error in the camera application and stops , so I will try to reinstall everything from 0 and see if it works with the kernel stock and try again with this kernel and see if it stops me working again , if you work then it is not kernel problem , but if i happens again I will have to return to report the error or maybe it's something else that I am installed causing this conflict but I doubt it because I install very basic things ...
Click to expand...
Click to collapse
This kernel will only work with ROMS based on AOSP. If Aptoide is a stock rom, or anything other than AOSP, forget the effort. It will not work.
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Cassini-Huygens said:
So this kernel is compatible with CM12 nightlies coming out at the moment, or am i wrong?
Click to expand...
Click to collapse
I'll post a LP version tomorrow. it's working fine. The current is kitkat.
Amazing kernel indeed, only thing missing is RGB color correction, because of purple-ish color on low brightnes settings. Keep on good work!
I'm using Battery by Macropinch to monitor amperage. The latest kernel using the smartmax governor, I'm happy to report, is dipping into the 100mA range quite frequently with wifi and LTE on using the the 1-15-2015 cm12 build. I was getting upset that my cheap Huawei Y536A1 LTE phone was hitting this range on stock and lasting two days on a single charge and my Moto X was staying in the 400-500mA without even touching it, but now I think I think this is a good early indication that we can be seeing good idle and casual use power drain on the moto x. Cheers!
PS: I never post, I didn't mean to post this in the Q&A section. How do I delete it?
is double tap to wake coming?
690sid said:
is double tap to wake coming?
Click to expand...
Click to collapse
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
tdhite said:
Actually, it's in the kernel I last uploaded, just fails to keep the touchscreen alive. Once I fix that, we'll have it. Give me a week -- very busy with work.
Click to expand...
Click to collapse
okay man... really appreciate your work.
Wanted to ask, is there a way to temporarily deal with the memory leak of lollipop using the kernel?
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
redo777 said:
i have moto x sprint UBL. and now I use cm12 5.02 nightly
does this kernel works for me?
thx
Click to expand...
Click to collapse
I can confirm this kernel works as a sweety on cm12 and on ! For battery wise settings of this kernel I recommend smartmax.
Is this the only android 5 compatible kernel we have , us the ghost ppl .. ?
---------- Post added at 12:01 AM ---------- Previous post was at 12:01 AM ----------
Can we hope to see an update any time soon ?
ban.codrut said:
Can we hope to see an update any time soon ?
Click to expand...
Click to collapse
Posted. Check the dev thread Downloads post.
work on cm12
hi can i flash this kernel in cm12 ?
great
Running on candy5 (ghost) with sweetener, droid maxx xt1080 rooted and unlocked! Everything is running great so far, I'll give you some feedback in a few days! Thanks for all the hard work!
help
I have this Kernel (20/7) on my Ressurection Remix. Who is the best configuration to save battery ? I need to know :
- Best CPU Governor
- Best CPU Voltage
-Best GPU Governor
- Etc
Really Thanks. Any help is great.
JTC3 said:
Do the latest nightly builds work with the D415?
Click to expand...
Click to collapse
Yes, the official Cm 11 works with the (D-415).... Use the D-415 Cm 11 patch
Aslo, when updating Cm 11..... Use the patch
Crystal Pa ROM work, but there some bugs.....
Crystal Pa: https://drive.google.com/file/d/0Bx2...ew?usp=sharing on page 2
Try Shoxxy, new recovery (2.8.4.0 testbuild) for encryption on Lollipop Cm 12
Thanks, Shinobisoft for patch:
https://docs.google.com/file/d/0B128X29fW1qecm94c1NUMXVCSzA/edit?usp=docslist_api
Also if anybody want CM OnePlus lockscreen, I have a zip :good: It also work on Pac Rom
Razer206 said:
Yes, the official Cm 11 works with the (D-415).... Use the D-415 Cm 11 patch
Aslo, when updating Cm 11..... Use the patch
Patch works on Candy ROM also :good:
Try Shoxxy, new recovery (2.8.4.0 testbuild) for encryption on Lollipop Cm 12
Thanks, Shinobisoft for patch:https://docs.google.com/file/d/0B128X29fW1qeakdEMVA1WW5HRkE/edit?usp=docslist_api
Click to expand...
Click to collapse
Which patch are you referring to to patch Candy 5? As far as I know, @shinobisoft 's patch only works for CM 11 based roms.
ardentis said:
Which patch are you referring to to patch Candy 5? As far as I know, @shinobisoft 's patch only works for CM 11 based roms.
Click to expand...
Click to collapse
Last I remembered, I flash Crystal ROM..... Month ago, so I was mistaking �� The ROM works but some settings dont.
Patch file 404, fail.
It wouldn't load for me either, it says
"Sorry, the file you have requested does not exist.
Please check the address and try again. ".
How bad is the camera on CM? From what I understand the camera for the L90 isn't working properly under CM11, taking poor quality photos. Are there any other issues? I love CM but a stripped factory ROM is working great right now on my D415.
bassic said:
How bad is the camera on CM? From what I understand the camera for the L90 isn't working properly under CM11, taking poor quality photos. Are there any other issues? I love CM but a stripped factory ROM is working great right now on my D415.
Click to expand...
Click to collapse
I have a D415 running the latest nightly build of official CM11, with BigMajster's patch. Here are the major issues I've encountered so far:
Video playback doesn't work for Netflix or NBC, but it works for browser (HTML5), YouTube, and FIOS Mobile.
Camera doesn't autofocus
Bluetooth streaming cuts out frequently
Random reboots (every 2 days or so)
It's worth noting that the battery life is fantastic compared to my Optimus G and iPhone 4S (never used the L90 on stock firmware, so I can't compare builds). My phone rarely goes under 30% before 9PM, and I regularly get 12 hours of battery with 4.5 hours of screen on time (web browsing and streaming video). I barely use my car charger anymore.
Just tried it with last nights NIGHTLY.
still no video recording.
Gps is about 2300 miles off. LOL
Runs smooth. Less glitchy. Feels good. Didn't stick with it long though....
...went back to CM12 for my daily driver..
Running this mornings w7 NIGHTLY (http://get.cm/get/nxh) on my D415.
My God, someone has been putting work in!
The device is smoother, boots much quicker, screen is far more responsive now too!
The three reboots I have done also recognized the SIM faster too. It usually takes about a minute to recognize the network. This time, four seconds! Nice!
It's much less glitchy, again. Lets see of it still über deep sleeps?
Don't know if any of that is from this mornings update, but this device is running much better than it was last night.
When I woke up this morning:
Dirty flashed over existing CM11 system. (With one eye open, still in bed)
Bootloops, my favorite breakfast!
Flashed @BigMajster kernel (patch).
Perfekt again!
Only been running for about 1.5hrs but, it's noticeably better.. I recommend it.
Sent from my CM11 L90-D415 using XDA Free mobile app
Razer206 said:
Also if anybody want CM OnePlus lockscreen, I have a zip :good: It also work on Pac Rom
Click to expand...
Click to collapse
Link to file? I was wondering if it could be ported. Thank you.
jran0880 said:
Link to file? I was wondering if it could be ported. Thank you.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B-0AY5y9hzZIUWVUazhiZ0FZT0U/edit?usp=docslist_api
That's a copy I keep on my Drive..
It is for D415 L90. This makes official CM11 nightlies boot for the D415.
Flash ROM, flash Patch. Works well.
REMEMBER D415 L90 Optimus.
As far as porting..
Anything can be done, if you just believe....
Sent from my CM12 LolliOptimus D415 via XDA mobile app
jran0880 said:
Link to file? I was wondering if it could be ported. Thank you.
Click to expand...
Click to collapse
This oneplus Lockscreen an audioplayer
https://drive.google.com/file/d/0B128X29fW1qeaEd2Y1MtZm9kLUk/view?usp=sharing
If the zip don't flash, move files using Root browers.
installing cm11 patch
im currently on the 12/1/14 build which was the build given in the cm 11 d-415 forum, but everytime I try to install the cm11 patch3 zip and go to official cm 11 I get a continues bootloop, ive tried every combination of flashing I know, and they all start with clean wipe and ive even done the dirty flash and nogo, any input trying to go to the 3/9/15 build
unlocked BL
twrp up2date
crashpsycho said:
im currently on the 12/1/14 build which was the build given in the cm 11 d-415 forum, but everytime I try to install the cm11 patch3 zip and go to official cm 11 I get a continues bootloop, ive tried every combination of flashing I know, and they all start with clean wipe and ive even done the dirty flash and nogo, any input trying to go to the 3/9/15 build
unlocked BL
twrp up2date
Click to expand...
Click to collapse
The patch only works on Quarx Offical Cm11
https://drive.google.com/file/d/0B128X29fW1qeVEJSS1JDb21xSVU/view?usp=sharing
This is awesome! How about the IR? Still a no for that?
LaDY Vengeance said:
This is awesome! How about the IR? Still a no for that?
Click to expand...
Click to collapse
Yes. For CM11 you need to install the LG IR app and SDK apps that go with it.
There's a thread about it with downloads. I'd blame @shinobisoft for that fix, if I'm not mistaken...
..but it works on CM11 w7 OFFICIAL. As does the Quick button with LG utilities app... Which is a friggen God send!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile
brossovitch said:
Yes. For CM11 you need to install the LG IR app and SDK apps that go with it.
There's a thread about it with downloads. I'd blame @shinobisoft for that fix, if I'm not mistaken...
..but it works on CM11 w7 OFFICIAL. As does the Quick button with LG utilities app... Which is a friggen God send!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile
Click to expand...
Click to collapse
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
IR
LaDY Vengeance said:
This is awesome! How about the IR? Still a no for that?
Click to expand...
Click to collapse
Miss. Lady I think you got the wrong thread, Demonslayer, says he may have found a fix for IR.....working out bugs :good: but he wont release Rom to almost perfect...... I understand where he coming from what the need of moving on to a new project if you get the same results from the last....
wojtek267 said:
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
Click to expand...
Click to collapse
Can't find it. I will though.
But heres the apks in a zip. NOT FLASHABLE!
https://docs.google.com/file/d/0B-0AY5y9hzZINnlILWFINWJTQWc/edit?usp=docslist_api
Extract and install. Then reboot. I used this on CM11 for the D415.
Sent from my KustomDegas[SM-T230NU] using XDA Free mobile app
wojtek267 said:
I haven't seen such thread, can you point me to it? And as far as I remember, it was demonslayer who mentioned something about fixing IR and testing it
Click to expand...
Click to collapse
Haha, read the unofficial CM11 D415 thread. It's in there. Hahahaha!
Sent from my CM12 L90 LollipOptimus D415 via XDA mobile
This is a compile done for a friend, as he found lp/mm roms to be unbearably laggy,especially when using social media/chatting apps. Just thought it could help some folks hoping to run an updated kitkat in their old(but great) galaxy s3. After some usage, his words were: this phone is part of my hand again .
This is a straight compile from cm11 sources for i9300, with the pac-rom source code(the best kitkat custom rom imo). Battery life, performance and stability are truly superb. Sources merged on 12-Oct-16, therefore having the latest stagefright and other security patches built-in. Wifi-fix for i9300 is also integrated. The rom is working fine with the latest boeffla-kernel(2.14) released for cm11, and thats the tested and recommended configuration. Some useless apps removed(like voicedialer, whisperpush,moviestudio,pacconsole and some more i can not remember) and i also removed pac console from the rom configuration settings framework as well. Have fun using it.
Link: https://mega.nz/#!Vl4nnYrK!N1PYfctzAnkOVDucMVsSCT5nnxUqY_oAZe2tsGDXkAo
All credits go to cyanogenmod and pac-rom team for both their amazing roms and sources for i9300 and many other phones we use and love!
Thanks you,!!
Screenshots?
Enviado desde mi SM-G935F mediante Tapatalk
Not having the phone means no screeshots . You can try it and put some up for everyone to see. You wont be disappointed.
What about gapps?? We have to dwnload it?
This is a clean rom, no gapps,xposed, or other mods included. use opengapps.
Really appreciate your efforts here... Great work on this rom... everything working fine... If possible can you put some time looking into Archidroid 4.4.4... IMO it was the best rom our s3 could ever have.... It has some wakeblock issues that might get resolved if we update the sources. Again thanks for your effort. S3 community owes you!
Hi uninstall theme auto reboot! Please to fix
sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
This problem persist with the latest snapshot of cm 11 also... nly install themes that you like... doesnt affect the functionality of the rom having themes installed.
Thanks for this great ROM. The only issue I have is I cant get 3G to work. Any suggestions? Would be much appreciated...
Its probably an APN problem, try inputting your carrier settings manually. 3g works fine on my friends' phone.
The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect
Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?
pchatzop said:
Try the fix in this thread: http://forum.xda-developers.com/galaxy-s3/help/wifi-fix-cm11-i9300-t2910872 . I already included the needed file in the rom, and it works fine here, but it couldnt hurt to try. Could it also be your router causing this?
Click to expand...
Click to collapse
Will try! And it isn't the router, it worked with cm12.1 (no issues whatsoever) and cm13 (the issue on cm13 was random disconnects but it was rom related too).
Hey!
Switched to this rom recently and being very impressed, it having all the features one could ever want yet stable and battery friendly. Definitely better than MM roms on S3.
However do we need an kitkat bootloader or do we even have one available? Still on the official 4.3 bootloader and just wondering if could get more stability if upgrading it to kitkat.
Kitkat bootloaders dont exist for the i9300, since it never officially got kitkat. Last semi-stock kitkat rom for the i9300 were ported roms from n7100 and the korean variant of gs3, and they did not include a bootloader, because it would hard-brick the phone. Having installed 4.3 before this was the best you could do. Having this rom installed in 2 phones(my friend's and my sister's) i definitely recommend installing boeffla's last cm11 kernel, no stability,battery, or features problems with it. Actually, apart from the rebooting on uninstalling themes bug, no other bug has been reported to me from them, no even ones in the thread.
sak0071 said:
Hi uninstall theme auto reboot! Please to fix
Click to expand...
Click to collapse
Hold power, power menu come up, hold reboot, enter safemode, uninstall theme from app menu...that should work
Sent from my GT-I9300 using XDA-Developers mobile app
Hi. This rom next update? thank
jabyftw said:
The rom is incredible but I need to restart my system with Wifi turned on so it can connect. If it disconnects (for any reason, disabling wifi, getting out of range etc), it only flashes "Connecting..." when connecting to the router again, but it doesn't connect
Click to expand...
Click to collapse
I have the same problem. Is there a solution ?
wifi doesn't work ! any solution?
medsalah said:
wifi doesn't work ! any solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2910872
Sent from my GT-I9300 using XDA-Developers Legacy app