[Q] Device rebooting - Moto X Q&A

Hi,
I am facing some issues with my Moto X XT1058.
Unlocked Bootloader
Rooted
Xposed
Retail Brazil 4.4.3
It boots, but after some seconds the screen becomes black and the boot logo appears. It boots and works correctly on secure mode.
Have anyone faced a similar issue?
Can anyone try to help?
Please find below 2 logcats and 2 last kernel messages:
log1 - http://pastebin.com/yNC9MT6f
log2 - http://pastebin.com/9BuvjKPL
last_kmsg1 - http://pastebin.com/pWFJfg19
last_kmsg2 - http://pastebin.com/um1YDFYN
Any help is apreciated.
Thanks in advance,

lucfig said:
Hi,
I am facing some issues with my Moto X XT1058.
Unlocked Bootloader
Rooted
Xposed
Retail Brazil 4.4.3
It boots, but after some seconds the screen becomes black and the boot logo appears. It boots and works correctly on secure mode.
Have anyone faced a similar issue?
Can anyone try to help?
Please find below 2 logcats and 2 last kernel messages:
log1 - http://pastebin.com/yNC9MT6f
log2 - http://pastebin.com/9BuvjKPL
last_kmsg1 - http://pastebin.com/pWFJfg19
last_kmsg2 - http://pastebin.com/um1YDFYN
Any help is apreciated.
Thanks in advance,
Click to expand...
Click to collapse
Have you attempted to re-flash your entire Stock 4.4.3 ROM as per the "Return to Stock" thread (in General sub-forum)? Likely, this is the only thing that will solve your problem. I realize that it is a pain to set everything back up again, but it will almost definitely fix your issue.
Good Luck :good:

Thanks for the reply.
I am backing up my apps and my last option is a factory reset.

lucfig said:
Thanks for the reply.
I am backing up my apps and my last option is a factory reset.
Click to expand...
Click to collapse
If a factory reset does not help, you will need to follow the instructions in the link I posted for you previously. Flashing back to stock is MUCH more thorough than a "factory data reset", because it can actually repair a corrupted / damaged filesystem. A "Factory Reset" can not.
Good Luck, and please let us know what works out for you.

Thanks.
I will do that.

Related

[Q] Moto XT1060 Verizon Unlock Bootloader

Hi Everyone... I have Moto XT1060 Verizon and phone not loading...when I try to load boot menu...phone shows that phone is Locked! Maybe someone can help me, what I need to do?
diforgea said:
Hi Everyone... I have Moto XT1060 Verizon and phone not loading...when I try to load boot menu...phone shows that phone is Locked! Maybe someone can help me, what I need to do?
Click to expand...
Click to collapse
First, please tell us how you got in this situation. What did you do that ultimately led to the inability to boot?
Additionally, it is perfectly normal for your phone to have a locked bootloader. All Verizon variants (except the Dev edition) are not able to have the bootloader unlocked, unless you are able to get a code from the 'China middleman' (use search if interested).
samwathegreat said:
First, please tell us how you got in this situation. What did you do that ultimately led to the inability to boot?
Additionally, it is perfectly normal for your phone to have a locked bootloader. All Verizon variants (except the Dev edition) are not able to have the bootloader unlocked, unless you are able to get a code from the 'China middleman' (use search if interested).
Click to expand...
Click to collapse
I tried to update my Android version from 4.2 to 4.4...after i updated Android phone starts rebooting each time (in 20 seconds when loading)...after that I read on some forum that I need to Erase Data (smth like that) and to install clean Android from bootmenu...and after i rebooted my phone - phone not loads anymore (when I try to load boot menu - phone shows that phone is Locked! )
diforgea said:
I tried to update my Android version from 4.2 to 4.4...after i updated Android phone starts rebooting each time (in 20 seconds when loading)...after that I read on some forum that I need to Erase Data (smth like that) and to install clean Android from bootmenu...and after i rebooted my phone - phone not loads anymore (when I try to load boot menu - phone shows that phone is Locked! )
Click to expand...
Click to collapse
OK your phone has always been locked - you just didn't notice it before. Not to worry... This is easily fixed. Please find the thread in the general forum "return to 100% stock" and follow the instructions to flash the entire sbf for you phone. All the links to everything you need including the firmware files themselves are in that thread.
Be careful to NOT downgrade.... It will brick your phone. Only flash the same or later firmware than what is already on it.
Good luck. You will be fixed up in no time if you follow those instructions.
:good:
samwathegreat said:
OK your phone has always been locked - you just didn't notice it before. Not to worry... This is easily fixed. Please find the thread in the general forum "return to 100% stock" and follow the instructions to flash the entire sbf for you phone. All the links to everything you need including the firmware files themselves are in that thread.
Be careful to NOT downgrade.... It will brick your phone. Only flash the same or later firmware than what is already on it.
Good luck. You will be fixed up in no time if you follow those instructions.
:good:
Click to expand...
Click to collapse
many thanksssss!!!!!!!!!!!!!! it works!!!! i thought my phone was already brick

I failed on root. My brand new Moto X has been hardbricked.

[Solved] Yesterday I tried to root my phone but after do all the steps that were on the sites, I couldn't turn it on anymore. Everytime I try it makes the bootloader but when it ends, the moto x turns off again. I don't know what happened someone told me that it names hardbrick so, can anyone tell me how to fix it? Or if it's possible.
If you need some information to help me, just ask. [Solved]
If you can get to the bootloader is not bricked.
Look up how to use fastboot to flash the system and boot img.
Go to soltrans' thread and you should be fine
Sent from my victara
fastercon said:
Go to soltrans' thread and you should be fine
Sent from my victara
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x-2014/general/guide-update-xt1095-pure-edition-to-t2937074
Start with step "0".

[xt1068] Moto G 2014 bricked more than once, which stock firmware to use?

Hello all, a while ago my Moto G runnning CM 12.1 suddenly crashed, got stuck in bootloop and upon factory reset it got bricked with access just to the bootloader. I brought it to a friend who was able to install stock firmware and then CM 13, the phone worked fine for a few days just to have the same issue all over again.
I did as he told me, and basically went through the process of flashing stock firmware as per this post., but it fails when flashing motoboot. My friend said he "bombed" the device with all the (failed) commands anyway until the phone was completely dead for a few hours, then recharged it and was finally able to flash the firmware. I tried doing the same but I never got past the motoboot bit as mentioned above.
I used
RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml
Click to expand...
Click to collapse
firmware but I now I'm wondering whether it is the wrong file. The info on the phone box's label says
MOTOROLA,XT1068,RETAIL,EURO, BLK 8GB
Click to expand...
Click to collapse
(I am indeed in Europe).
If it can help, other writings and figures are:
Model: SM3928AE7T1
Type: M0FB9
SeQ#: 26024621
Click to expand...
Click to collapse
I've scoured many posts but haven't really found any specific answers as to how to identify the correct firmware out of those up for download, I can provide other info if needed. The phone has been revived before so I guess it is doable again, thanks for your help and have a good year everyone! :highfive:

Bricked phone

Hello,
Yesterday I accidentally flashed the wrong SuperSU version to my phone. After that it would not boot to Android anymore and the only places it would let me go to are the "Unlocked bootloader" screen and the recovery/TWRP. I tried to do a factory install and that would also not work. After that I accidentally wiped all the data out of "/sdcard". My version of the phone is XT1541 europe 2gb. Does anyone have a solution for this?
Thanks in advance,
Henk Schurink
Hey, Henk,
Your phone model's discussion forum is somewhere else. Ask there - they must be more in the know about the XT1541.
It doesn't sound that bad, though; good luck!

Samsung Galaxy A6 touch screen not working after update

Hello, guys! After installing the latest update on my Galaxy A6 (A600FN) the touch screen stopped working. I tried flashing all 3 ROMs for my region that had the version 5 bootloader with Odin and none of them fixed the issue. One of them was Android 10 and 2 were Android 9. ROMs with an older version of the bootloader would fail the flash because apparently you can't downgrade it. It shows this error: Sw rev. Check fail. Device: 5, binary 3. I'm certain it's not a hardware issue because I had this happen on 2 A6 devices right after the update. I thought of trying a custom ROM but I can't find one for A6, only A6+. What can I do here? Can I trick it somehow to downgrade it? Is there some command I can send through adb shell to fix the touchscreen? Any help would be greatly appreciated!
BTW, I can access the device via a USB OTG mouse and it works perfectly fine.
Bump. Please, any help is appreciated!
Do you tried factory reset from recovery?
Zevnor said:
Do you tried factory reset from recovery?
Click to expand...
Click to collapse
That was the first thing I tried. Didn't help.
robert335 said:
That was the first thing I tried. Didn't help.
Click to expand...
Click to collapse
Is your phone carrier-branded? If yes, try to flash unbranded firmware.
I managed to fix it, will update this post soon with how I did it.
robert335 said:
I managed to fix it, will update this post soon with how I did it.
Click to expand...
Click to collapse
HI, if you have a solution to this problem can you share it please? I have the same phone with the same issue .
barthab said:
HI, if you have a solution to this problem can you share it please? I have the same phone with the same issue .
Click to expand...
Click to collapse
First make sure you aren't RMM locked: https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Then get yourself TWRP: https://forum.xda-developers.com/galaxy-a6/development/recovery-twrp-3-2-2-0-galaxy-a6-t3819741
Afterwards, I installed this custom ROM which is pretty close to stock Pie: https://forum.xda-developers.com/galaxy-a6/development/rom-pa6-rom-a6-t3943573
Maybe you can try this one too, I haven't tried it: https://forum.xda-developers.com/galaxy-a6/development/phonezippy-microrom-t4083579
After installing the ROM, make sure to install "no-verity-opt-encrypt" and "RMM Bypass v3". This is VERY IMPORTANT, otherwise your device will become RMM locked and brick itself until you flash stock firmware again.
I fixed both of my phones but looks like I messed up on one and after I restarted it had RMM state Prenormal. Does anyone know how to fix this? OEM is unlocked in developer settings but flashing twrp from Odin yields "only official binaries are allowed"...

Categories

Resources