Ever since I re-locked my bootloader it has never wanted to unlock again.
The first time I unlocked my bootloader was on 10.4.1.B.101 (i think). I flashed VanirAOSP and it worked fine. I cracked my screen later on so I locked bootloader and flashed stock to send it in for repairs. All was fine.
Yesterday I attempted to unlock once again, but this time on the latest 4.4.2 stock rom (not rooted)
Bootloader unlock allowed: Yes
All was good so far.
I used fastboot.exe -i 0x0fce getvar version to see if the device was attached properly.
*Bear in mind I have not re-installed Windows or install/uninstall drivers for any of my Android devices.
It returned 0.5 so I proceeded to unlock the bootloader using fastboot.exe -i 0x0fce oem unlock 0xKEY
It said FAILED (remote: Command did not succeed)
I used the same command again and it did "..." for a few seconds and said OKAY
I unplugged my XZ and rebooted it and it bootlooped forever.
I have since restored with PC Companion and rooted with Towelroot. Really missing AOSP so does anyone have any suggestions as to how I can fix this?
Did you check the imei and the unlock key?
St.Jimmy90 said:
Did you check the imei and the unlock key?
Click to expand...
Click to collapse
Yes its correct.
bump..
ZynexOG said:
bump..
Click to expand...
Click to collapse
I'm not stalking you, for some reason this thread keeps showing up at the top of my Tapatalk feed ._.
Heard some people changed 0x0fce to 0x0FCE and it worked for them.
Just use only "fastboot oem unlock 0xKEY"
Neither of those worked.
Worst case scenario it could be dead eMMC. Dunno then.
ZynexOG said:
Neither of those worked.
Click to expand...
Click to collapse
Try to downgrade to 4.2.2 and unlock. And to update just flash any stock based rom or custom rom
Xperia™ Z (C6602) with Tapatalk.
androidfreak70 said:
Try to downgrade to 4.2.2 and unlock. And to update just flash any stock based rom or custom rom
Xperia™ Z (C6602) with Tapatalk.
Click to expand...
Click to collapse
I wiped everything and flashed 4.2.2 and it still did Failed: command did not succeed
I haven't tried with Flashtool yet but it shows that the bootloader is rootable.
Note that the KEY must be typed without last 2-4 digits (can't remember exactly).
Okay I've successfully unlocked the bootloader and flashed recovery using Flashtool.
I made an ulcode.txt in custom/mydevices/SERIALNUMBER and put my unlock code in the .txt
Opened flashtool, picked BLU and held vol down and plugged the usb cable into the phone.
I pressed Unlock and away it went and it completed.
After un-plugging I booted it up and my data hadn't been wiped and upon going into the Service Menu it shows that the BL is unlocked.
Hopefully this helps anyone else whos having troubles
Related
hey, this is my first post on here.
A while ago I got my Xperia Z which is unlocked to all networks and I checked in the service menu and it said I could unlock the bootloader so I did so and installed my own roms, then it became faulty so I got it repaired but before so I flashed the stock rom on there just incase it was refused to be repaired because of the custom rom.
When I got it back I discovered in the service menu my bootloader can no longer but unlocked and I cannot root it or put CWM on it or anything as I keep getting errors... any advise?
I tried using the original bootloader unlock code I got but the phone rejects it saying something like 'FAILED remote does not have permission' or something along those lines in the CMD while using the fastboot code.
L4WL13T said:
hey, this is my first post on here.
A while ago I got my Xperia Z which is unlocked to all networks and I checked in the service menu and it said I could unlock the bootloader so I did so and installed my own roms, then it became faulty so I got it repaired but before so I flashed the stock rom on there just incase it was refused to be repaired because of the custom rom.
When I got it back I discovered in the service menu my bootloader can no longer but unlocked and I cannot root it or put CWM on it or anything as I keep getting errors... any advise?
I tried using the original bootloader unlock code I got but the phone rejects it saying something like 'FAILED remote does not have permission' or something along those lines in the CMD while using the fastboot code.
Click to expand...
Click to collapse
It says
FAILED remote: command not allowed
i don't know what to do...
I've got my phone rooted now following a guide but it hasn't helped
Make sure your mobo has not changed, and ask Sony for a new unlock code
Sent from my C6603 using xda app-developers app
If in service menu, and in bootloader unlock = NO, then it mean your motherboard has been changed, or the person that do the repair just change another phone for you which is unable to unlock..bootloader unlock = NO status mean no matter how you do it, the phone cannot longer be unlock as the phone hardware has been lock for specific carrier(usually)...
I tried anyway putting my IMEI into the sony website and got a new unlock code but that will still not unlock the bootloader, and my issue never got fixed as I was told that the motherboard would need to be replaced and I couldn't afford it, and I'm concerned as to why my IMEI has changed and I can no longer unlock my bootloader and I've tried downloading a new stock rom and flashing it and my phone is unlocked to all networks still as that was the way I got it and it is still this way.
L4WL13T said:
I tried anyway putting my IMEI into the sony website and got a new unlock code but that will still not unlock the bootloader, and my issue never got fixed as I was told that the motherboard would need to be replaced and I couldn't afford it, and I'm concerned as to why my IMEI has changed and I can no longer unlock my bootloader and I've tried downloading a new stock rom and flashing it and my phone is unlocked to all networks still as that was the way I got it and it is still this way.
Click to expand...
Click to collapse
Just continuing into that thread, is that possible to mod the carrier? I used to send my SXZ to the sav, get it back, unlocked the BL tried a rom and (was-i think- tired) I relocked it -_-, and from now on can't unlock the BL anymore,is there a solution or I just need to reflash the TA, put everything to stock and send it back to sav?
Can someone help? :$
Oxydeme said:
Can someone help? :$
Click to expand...
Click to collapse
I had same problem. And it even said it was unlocked... I reentered my imei and copied the code.. After many tries it worked... I used both flashtool and fastboot
Sent from my C6603 using xda app-developers app
HellRoot said:
I had same problem. And it even said it was unlocked... I reentered my imei and copied the code.. After many tries it worked... I used both flashtool and fastboot
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
On FT, it said Bootloader: NOT ROOTABLE so I think everything come back to stock before I send my phone to the Sav... So just gonna wait and see
Hey guys last days im started looking how unlock my c6602 and i cant find any way that work for me
I tried doomlord way and didnt worked what i did:
1-Got my bootloader key from sony
2-connected my phone in fastboot mode to my pc
3-opend command window in the place i installed fastboot drivers
4-typed: FASTBOOT.EXE -I 0X0FCE GETVAR VERSION then enter i got VERSION:0.5
5-typed:FASTBOOT.EXE -I 0X0FCE OEM UNLOCK 0X************
6-i got that error :invalit id (0x**************)
I checked the number many times and it was currect SO WHY???
I tried flashtool to unlock and i got that (failed remote: command did not success)
Is sevice menu says bootloader unlock allowed: yes
Is there any solution for that??
Running:4.3 stock %100
EDIT: today tried again in command window AND NOW EVERY TIME I THY THAT SAYS failed remote: command did not success)!!!!!:crying:
I said this to you when you asked in the bootloader unlock thread, but you didn't respond or acknowledge my reply.
The unlock key is case sensitive. Meaning that any letters that are upper case (capital letters) must be entered in upper case. So E must be entered as E, not e.
If you don't enter the unlock key exactly how they sent it to you, it will not work.
If it still won't work, maybe you entered your IMEI incorrectly when requesting the unlock key. Try requesting it again and double check the IMEI when you enter it into the form, as a key generated for the incorrect IMEI also will not work.
Sent from my C6603 using Tapatalk
Is there any one click to unlock?
kingvortex said:
I said this to you when you asked in the bootloader unlock thread, but you didn't respond or acknowledge my reply.
The unlock key is case sensitive. Meaning that any letters that are upper case (capital letters) must be entered in upper case. So E must be entered as E, not e.
If you don't enter the unlock key exactly how they sent it to you, it will not work.
If it still won't work, maybe you entered your IMEI incorrectly when requesting the unlock key. Try requesting it again and double check the IMEI when you enter it into the form, as a key generated for the incorrect IMEI also will not work.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I EntErEd the E as E and B as B and still the same
And also when i request me key i put my full IMEI and click ok and its says YOUR IMei is incurrect (try delete the last charecter) is thats may the problem?
Anyway i bored of that unlocking story now im trying to get perooted rom
Well, you're definitely doing something wrong. Both Flashtool and fastboot work for unlocking the bootloader for everyone else.
From your screenshot in the bootloader unlock thread, you were entering the key with all lower case characters, which was probably wrong if you're now entering some upper case characters. Enter it EXACTLY how it is in the email.
Anyway, good luck flashing any rom without root. You'll need root to install a recovery.
Sent from my C6603 using Tapatalk
Now im downloading eXistenZ ultra v6.0.0 they sayed its rooted with dual recovery and i like it so much.:good: the download will finish after 13 HOUR my internet so slow 15kbs
androidfreak70 said:
Now im downloading eXistenZ ultra v6.0.0 they sayed its rooted with dual recovery and i like it so much.:good: the download will finish after 13 HOUR my internet so slow 15kbs
Click to expand...
Click to collapse
Are you deliberately not reading what I'm telling you or something?
You'll need root to install a recovery to flash that rom. If you don't want to unlock your bootloader, you will need to downgrade to a 4.2.2 stock rom.
Sent from my C6603 using Tapatalk
kingvortex said:
Well, you're definitely doing something wrong. Both Flashtool and fastboot work for unlocking the bootloader for everyone else.
From your screenshot in the bootloader unlock thread, you were entering the key with all lower case characters, which was probably wrong if you're now entering some upper case characters. Enter it EXACTLY how it is in the email.
Anyway, good luck flashing any rom without root. You'll need root to install a recovery.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Part1:But i also tried with upper case
Part2:i tried to copy the key from my email to command window N didnt worked.
Part3:i need to downgrade to 4.2.2 root and install CWM then flash rom.:good::laugh:
Oh well. Good luck with it anyway.
Sent from my C6603 using Tapatalk
kingvortex said:
Oh well. Good luck with it anyway.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for trying to help me! (but my problems with 4.3 have no solution)
1+ thanks on all your posts in this thread {just feedback}
kingvortex said:
Are you deliberately not reading what I'm telling you or something?
You'll need root to install a recovery to flash that rom. If you don't want to unlock your bootloader, you will need to downgrade to a 4.2.2 stock rom.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
So how do i reply if i dont read what you telling me?
The DOWNGRADE that what i will do
I guess I'm having the same issue as when I was trying to unlock bootloader through flashtool I used the code from Sony website generated by my IMEI, I copied it Exactly as they have sent it and flashtools response was at first Fail and when I tried to do it second time it happened to work and said 'okay' but after turning my phone on it ended up in endless loop... I tried it on 4.3 and 4.2. The bootloader unlock allowed says yes.
Please help
I am not allowed to post on MoKee thread so I will post my question here.
http://forum.xda-developers.com/showthread.php?t=2761807
I am not a newbie and have been following XDA for 6 different devices and more than 5 years. But I just didn't post enough.
I am currently on SONY Xperia ZR (C5502) 4.4.2 (rooted). I have been trying to flash MoKee 4.4x for the past few weeks but in vain. I bricked my device few time already by trying and have to revital it with all kind of tools (Flashtool, Sony Update Service, fastboot).
I guess now my question is - "Does MoKee ROM requires Unlock Bootloader?" In the last post of that thread, someone said that it MUST be Unlock Bootloader. Is that true? The only reason I care so much about this is because I screwed up my device every time I unlocked it.
I was using the "fastboot.exe -i 0x0fce oem unlock 0xKEY" method.
I am currently using 10.5.A.0.230.
Your answer will be really appreciated.
lcpchang said:
I am not allowed to post on MoKee thread so I will post my question here.
http://forum.xda-developers.com/showthread.php?t=2761807
I am not a newbie and have been following XDA for 6 different devices and more than 5 years. But I just didn't post enough.
I am currently on SONY Xperia ZR (C5502) 4.4.2 (rooted). I have been trying to flash MoKee 4.4x for the past few weeks but in vain. I bricked my device few time already by trying and have to revital it with all kind of tools (Flashtool, Sony Update Service, fastboot).
I guess now my question is - "Does MoKee ROM requires Unlock Bootloader?" In the last post of that thread, someone said that it MUST be Unlock Bootloader. Is that true? The only reason I care so much about this is because I screwed up my device every time I unlocked it.
I was using the "fastboot.exe -i 0x0fce oem unlock 0xKEY" method.
I am currently using 10.5.A.0.230.
Your answer will be really appreciated.
Click to expand...
Click to collapse
Yes just like any other rom out there you will need an unlocked bootloader. The reason is because you have to flash a custom recovery such as CWM and to do that you need to unlock your bootloader. I recommend unlocking you bootloader using flashtool instead of the command. Because it is just easier. When I was trying to unlock my bootloader I experienced problems doing it the way with the cmd. And what problems does it give you after unlocking and how does it screw your device? Thanks!!
PS: Try flashing a custom recovery because maybe your bootloader is already unlocked.:good:
gurinderhans said:
Yes just like any other rom out there you will need an unlocked bootloader. The reason is because you have to flash a custom recovery such as CWM and to do that you need to unlock your bootloader. I recommend unlocking you bootloader using flashtool instead of the command. Because it is just easier. When I was trying to unlock my bootloader I experienced problems doing it the way with the cmd. And what problems does it give you after unlocking and how does it screw your device? Thanks!!
PS: Try flashing a custom recovery because maybe your bootloader is already unlocked.:good:
Click to expand...
Click to collapse
I have installed -=[XZDualRecovery]=- with locked bootloader, so I don't think the reason is about the flashing of the recovery, maybe is something related with kernel flashing. but I'm not sure.
anancr said:
I have installed -=[XZDualRecovery]=- with locked bootloader, so I don't think the reason is about the flashing of the recovery, maybe is something related with kernel flashing. but I'm not sure.
Click to expand...
Click to collapse
maybe but I wasnt able to write the boot.img unless I unlocked my bootloader.
confirmed that it REQUIRES Unlock Bootloader to install MoKee
gurinderhans said:
maybe but I wasnt able to write the boot.img unless I unlocked my bootloader.
Click to expand...
Click to collapse
Thanks for the advise from gurinderhans
Yes, I have confirmed that it REQUIRES Unlock Bootloader to install MoKee.
I unlocked my bootloader with Flashtool this time, instead of commend line this time. That fixed the problem I used to have.
But I used the CWM comes with XZDualRecovery to install MoKee 4.4.4. It works out fine.
lcpchang said:
Thanks for the advise from gurinderhans
Yes, I have confirmed that it REQUIRES Unlock Bootloader to install MoKee.
I unlocked my bootloader with Flashtool this time, instead of commend line this time. That fixed the problem I used to have.
But I used the CWM comes with XZDualRecovery to install MoKee 4.4.4. It works out fine.
Click to expand...
Click to collapse
Good to know everything worked out fine.
Any custom rom requires boot loader unlock.
hey
well i got my xperia z c6603 a few weeks ago and i unlocked the bootloader using the instructions on the sony website,well everything went ok.
but i had a issue when flashing something so had to flash back to a generic uk rom,well ever since i have been unable to unlock my bootloader again!
tried flashtool and i get FAILED (remote: incorrect format for unlock data. should be in the form of "0x) and it does start with 0x
before this i tried the fastboot using cmd or command prompt
when i type fastboot.exe -i 0x0fce getvar version i get 0.5
but when i try to put in the unlock code i get
FAILED (remote: command did not succeed)
finished. total time: 0.040s
if i put the code in again it does work but then the phone gets stuck in a bootloop!
i have tried different generic roms and have even tried going to a older rom and upgrading through sony companion but i keep getting the same thing!
i really dont know what to do,i hope someone can help me please.
is there any other way of doing this? what could have caused it? it worked fine untill i failed installing a rom.
i am from the uk,so i have tried different generic roms but it just does the same thing the phone is working perfectly fine and theres no changes
Forgive me if I'm wrong, I'm sure someone will correct me but AFAIK the bootloader doesn't relock by simply flashing a stock rom. It should still be unlocked and that's why you are undergoing issues attempting to unlock possibly? Have you tried reflashing the kernel ?
flashing stock rom doesn't relock the bootloader
With the Moto Z, after I returned the phone to stock (flashed stock firmware and locked the bootloader), I'd be able to flash stock firmware with the flashing locked.
Not so with the Motorola One Zoom. In other words, flashing stock and re-locking didn't return the phone to its pristine state. Even when flashing stock firmware over stock firmware, I have to unlock the bootloader.
Differences I observed: on the bootloader screen, when re-locked the Z would show "oem_locked" again. On the One Zoom, it shows "flashing_locked" instead. I'm pretty sure it showed "oem_locked" before unlocking.
WIth the Z, every time I wanted to unlock the bootloader, I had to issue "fastboot oem unlock" followed by the unlock code. The code isn't necessary with the re-locked One Zoom.
In other words, maybe it was a one-way trip. It seems that the phone won't return to its original state, it looks it's modified for good. And I'm afraid this means bye-bye to automatic updates.
Am I missing something here?
My bootloader is also unlocked and I dont have any problems with receiving and installing OTAs I also have Magisk and EdExposed installed - no problems at all.
rafikowy said:
My bootloader is also unlocked and I dont have any problems with receiving and installing OTAs I also have Magisk and EdExposed installed - no problems at all.
Click to expand...
Click to collapse
Phew! I'm glad I'll be able to install OTAs. Have you tried flashing it manually or via RSD Lite? Here it won't flash.
Whammamoosha said:
Phew! I'm glad I'll be able to install OTAs. Have you tried flashing it manually or via RSD Lite? Here it won't flash.
Click to expand...
Click to collapse
Hey, yes, flashing manually. I will provide you flashing scripts tomorrow.
rafikowy said:
Hey, yes, flashing manually. I will provide you flashing scripts tomorrow.
Click to expand...
Click to collapse
Don't bother, I have mine. Thanks.
I would like the flash script if someone would share it
Help with unlocking bootloader
I tried to unlock the bootloader and i am now in a menu with an android with his chest open. In the cmd on my pc i try to type fastboot flashing unlock but it just gives me an error.
I dont know if this is the correct place to post this but i have no idea where to post it and i dont want my phone get bricked.
Bodeman12345 said:
I tried to unlock the bootloader and i am now in a menu with an android with his chest open. In the cmd on my pc i try to type fastboot flashing unlock but it just gives me an error.
I dont know if this is the correct place to post this but i have no idea where to post it and i dont want my phone get bricked.
Click to expand...
Click to collapse
In the settings for developers you gave permission for Factory Unlock?
ilia3367 said:
In the settings for developers you gave permission for Factory Unlock?
Click to expand...
Click to collapse
I enabled the setting to unlock oem bootloader is that the same?
Bodeman12345 said:
I enabled the setting to unlock oem bootloader is that the same?
Click to expand...
Click to collapse
yes.
What instruction did you use to unlock the bootloader?
What region is your device manufactured for?
Does your PC see your device connected to the fastboot mod?
What does this command give you:
Code:
fastboot devices
If the device is detected, enter the command:
Code:
fastboot getvar all
And copy the result here.
ilia3367 said:
yes.
Click to expand...
Click to collapse
Yes I did that
Bodeman12345 said:
Yes I did that
Click to expand...
Click to collapse
Answer the other questions, please!
diculpe por que mi pc no ve el fastboot de mi one zoom?
ilia3367 said:
yes.
What instruction did you use to unlock the bootloader?
What region is your device manufactured for?
Does your PC see your device connected to the fastboot mod?
What does this command give you:
If the device is detected, enter the command:
And copy the result here.
Click to expand...
Click to collapse
I used this youtube video
I dont know where it is manifactured but I live in the netherlands.
I dont get the 3th question
I will do the commands in a couple minutes
Hey all,
I have the Moto One Zoom running on Android 9.
Also, It's Rooted with Magisk and have Riru EdXposed installed, can I install my OTA updates without bootloop or do I have to Uninstall Magisk, relock bootloader and factory reset/flash stock firmware to get latest OTA updates?
Any feedback is appreciated.
Thanks