Displaying Mobile Network Icon - One (M7) Q&A, Help & Troubleshooting

Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense

Well 3g and H+ are different. You can check to make sure in data settings that you have GSM/WCDMA/LTE AUTO set in there.

Howie3045 said:
Hey, im not sure what i should have called this thread but anyway, when i lose LTE on my phone it used to switch to H+, now it switches to 3G. Basically im wondering what i need to switch in the default file to display H+ instead of 3G
i hope this makes some sense
Click to expand...
Click to collapse
I basically loose the H (HSPA) service with my operator by taking the 4G package, I get 4G LTE, and in bad coverage area's, which is almost everywhere for Vodafone UK except major cities, I get a G or an E unless I can connect to a wifi.

Related

Disable "3G" while enabling "H" - possible or not?

My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
Unfortunately, it's impossible, you can either choose "H" & "3G" with wcdma/umts or "G" & "E" with GSM in Mobile Networks. You can't choose to leave out 3G when it's doing H, cause both of them are under wcdma mode.
Of cause, if you leave your "Network mode" to auto, it will jump around gsm and wcdma when it see fit. By choosing it to run GSM mode only, will keep your network connect to "E"/"G(gprs)" ONLY; Or WCDMA for "H"/"3G" ONLY.
helo
3Flight said:
My carrier has bad 3G operation, whilst HSDPA works fine. The problem is that phone sometimes switches between 3G and H, and when it does switch to 3G, there is no internet until it swithes back to H or down to E. I'm almost sure that this is caused by carrier, and I can't fix it with firmware. So I would like my Tab to avoid 3G mode at all, while using H and E. Can I set it to do so?
Click to expand...
Click to collapse
im from malaysia also,im using samsung g5..in my opinion its the the phone or tab firmware or rom problems..because im using maxis and digi broadband..both network are having problem..3g and hsdpa both switch on and back 3g h 3g h..not stabil and anoyying..

[Q] Would like to set GSM,LTE

Hi,
I noticed at my work my Edge is stronger then my LTE but LTE works better and of course faster then Edge. I am asking if anyone knows how to force only GSM for calls and LTE for data. I go through the options and notice many settings but LTE is always "LTE AUTO" I also use the hidden menu *#*#4636#*#* and set LTE only or CDMA, LTE Unfortunately I am on Rogers and CDMA does not allow my calls to go through and LTE only is exactly that only LTE. Both those options work great but of course drop sporadically which I can live with except the no phone part. What is the point of having a phone if you have no phone reception working on your phone.....
So my question is simple, is there a way to have only GSM and LTE set up or at least GSM and 3G/4G but with out the E network which ever that is.
Thanks
JB
No one?
dudejb said:
No one?
Click to expand...
Click to collapse
Are there any Mods to keep LTE active in low reception area.
dudejb said:
Are there any Mods to keep LTE active in low reception area.
Click to expand...
Click to collapse
You could force LTE only, but then when the reception drops off, you'll have zero cell service.
It would be nice if there were more options offered for preferred networks. I leave mine on WCDMA preferred, and just do without LTE until I want/need it.

[Q] Force phone to stick to low signal LTE rather than switching to 3g?

Hey guys
So I looked around the forum for an answer to this question and i found similar topics but not exactly what I was looking for. I have the HTC one with sprint and the only issue I have with it is how it handles its preferred networks. If have 2 bars of LTE but 4-5 bars of 3g its going to stay on 3g and not switch to LTE. Is there anyway to change how it gives each signal preference. Currently it will wait till there is no 3g signal before it switches to 2g but LTE is not giving the same preference. I know it's just this phone because I had the iphone 5 before this and when I was on campus at my university it would stick to the 1 bar of LTE i had rather than switching to 3g. If I force the phone in LTE only mode then it will pick the LTE signal but then I can't call and text obviously so it's not very useful.
There are two things that the iphone 5 did which I miss but otherwise love this phone. One is getting LTE in places that has low coverage and the other is roaming on verizon network on 3g. The iphone would always roam on 3g but the htc one only roams on 2g.
Is there a way to change those things with this phone? Thanks in advance!
onelight17 said:
Hey guys
So I looked around the forum for an answer to this question and i found similar topics but not exactly what I was looking for. I have the HTC one with sprint and the only issue I have with it is how it handles its preferred networks. If have 2 bars of LTE but 4-5 bars of 3g its going to stay on 3g and not switch to LTE. Is there anyway to change how it gives each signal preference. Currently it will wait till there is no 3g signal before it switches to 2g but LTE is not giving the same preference. I know it's just this phone because I had the iphone 5 before this and when I was on campus at my university it would stick to the 1 bar of LTE i had rather than switching to 3g. If I force the phone in LTE only mode then it will pick the LTE signal but then I can't call and text obviously so it's not very useful.
There are two things that the iphone 5 did which I miss but otherwise love this phone. One is getting LTE in places that has low coverage and the other is roaming on verizon network on 3g. The iphone would always roam on 3g but the htc one only roams on 2g.
Is there a way to change those things with this phone? Thanks in advance!
Click to expand...
Click to collapse
Have you tried changing the preferred in the *#*#4636*#*# > Phone Information?
Hi thanks for the response. Yes I have messed around with that. That's how I got the LTE only option. It isn't a matter of not finding LTE signal. It's just the way the phone handles what is perferred. The phone first sees if there is a strong LTE signal and it catches that but the moment it goes to about 3 bars or less it will switch to 3g. I want it to continue sticking with LTE until the signal is gone completely like it does with 3g -> 2g.
onelight17 said:
Hi thanks for the response. Yes I have messed around with that. That's how I got the LTE only option. It isn't a matter of not finding LTE signal. It's just the way the phone handles what is perferred. The phone first sees if there is a strong LTE signal and it catches that but the moment it goes to about 3 bars or less it will switch to 3g. I want it to continue sticking with LTE until the signal is gone completely like it does with 3g -> 2g.
Click to expand...
Click to collapse
If its that way then I belive a builder will be able to forge a flashable zip for that purpose.
Terramoto said:
If its that way then I belive a builder will be able to forge a flashable zip for that purpose.
Click to expand...
Click to collapse
I see. And who do I ask for that? Or how can I build one? Sorry I am a bit of a rookie in this. I don't want to mess around with it too much but can learn. I thought there might already be some sort of hack or a modded PRL.
any new insight on this by anyone? thanks
I have lte at my work if I do lte only but it will switch to 3g when i turn everything else one because 3g signal is stronger than lte. id rather use lte however but still have my texting and calling capabilities.
onelight17 said:
any new insight on this by anyone? thanks
I have lte at my work if I do lte only but it will switch to 3g when i turn everything else one because 3g signal is stronger than lte. id rather use lte however but still have my texting and calling capabilities.
Click to expand...
Click to collapse
I know it's not an optimal solution, but have you considered using Google Voice integration in the meantime? With LTE only mode, so long as you're signed into an app of choice (Google Voice/Hangouts should be able to handle your calls and texts if you tweak at it a bit), you should have the desired service until you can get some dev help.

[Q] 4G Issue

Hi
I have a Z1 brazilian 6943 and my carrier is Claro. As you probably know 4G in Brazil is not great, even 3G is not 100% reliable so I have question that so far no one was able to respond to me.
When I leave the LTE(preference) WCDMA/GSM active under networks and I have 4G signal everything is ok, but the problem is that 99% of the time is not ok, there is no data available. So I expect the phone understand that LTE is not available and uses the 3G network but this doen not happen, I have zero data availability and I have to change from LTE (preference) WCDMA/GSM to WCDMA(preference)/GSM to have data...
Any one of you has the same situation? if so is there any way our phone understands that there is no 4G and uses 3G instead I have to do it manually?
Regards
Renato
No one has this issue? Any reply will help a lot
mussacredi said:
Hi
I have a Z1 brazilian 6943 and my carrier is Claro. As you probably know 4G in Brazil is not great, even 3G is not 100% reliable so I have question that so far no one was able to respond to me.
When I leave the LTE(preference) WCDMA/GSM active under networks and I have 4G signal everything is ok, but the problem is that 99% of the time is not ok, there is no data available. So I expect the phone understand that LTE is not available and uses the 3G network but this doen not happen, I have zero data availability and I have to change from LTE (preference) WCDMA/GSM to WCDMA(preference)/GSM to have data...
Any one of you has the same situation? if so is there any way our phone understands that there is no 4G and uses 3G instead I have to do it manually?
Regards
Renato
Click to expand...
Click to collapse
That's exactly the problem i have as well in France, the Z1 handle very bad the 4G, if you can't have a decent 4G connection just don't select it in network preference because u'll have signal problem. It's fine only when i'l folly cover by 4G, if it's not the case, just disable it in the notification and all will be Ok.

T Mobile Setup/Down Speeds

So i took out the Sim from the Iphone 6 im returning and popped it into this bad boy. Curious as to how you guys are setting up the phone so you get the correct LTE speeds. Im barely getting 9down whereas my gf's galaxy in the same room is getting 20+ down. wonder if i did anything wrong
It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.
dew.man said:
It depends on location. I've seen consistent 50+ down and 20+ up with T-Mobile and default APN.
Click to expand...
Click to collapse
Nah something is def wrong. Phone is barely usable without wifi. What APN settings are you guys using for tmo?
fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.
ikon8 said:
fast.t-mobile.com it should also give you the settings automatically if you just press the "Internet settings" button.
Click to expand...
Click to collapse
Thats what i been running. Could it have something to do with the sim? Was i supposed to get a sim for an unlocked phone? Urrgh so frustrating
That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.
ikon8 said:
That's pretty slow, your gf has the tmo also? Pop her sim in your phone and compare. The sim shouldn't matter though.
Click to expand...
Click to collapse
shes got a galaxy s4 so that wont work. however i still got the iphone 6 around. when i put the sim in that phone i get regular LTE speeds.
Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.
ikon8 said:
Oh, I just noticed in your speedtest result you're on H, not LTE. Under "preferred network mode" do you have "4G (preferred)" enabled? If you're in a border coverage area it could be that your phone is dropping you down to HSPA+ instead of staying on LTE.
For a test, go to the dialer and do *#*#4636#*#* then go to Phone Info and change it to LTE Only and test it to see if it stays on LTE and what kind of speeds you get, by default it's set to "LTE/GSM auto PRL" so if the LTE connection isn't strong enough it's going to drop you down to H+.
Click to expand...
Click to collapse
These Are my options under preffered:
wcdma only, gsm only, wcdma (preffered)/gsm and 4g(preffered)/wcdma/gsm. i dont see lte in the list
per your test, when I switch to LTE only in phone options the I lose all bars and signal totally craps out.
So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.
ikon8 said:
So when you switched to LTE Only, after a second or 2 you didn't get a 4G symbol above the signal bar? Do you ever see 4G? Mine switches to 4G within about 1 second of switching to LTE Only.
Click to expand...
Click to collapse
negative. just all bars gone and a big red x. you have this phone on t mobile also? did you do the us firmware update?
Yea, I'm using tmo. My phone is running 23.0.A.2.105
I got 2.93 maybe which one is 105??
I was worried during my first day of owning the phone because my Z1c showed LTE above the bars and now this Z3c shows 4G. I was worried that 4G != LTE.

Categories

Resources