Database Develop

HELP plssss...

HI... can any body help me on my problem....
HERA100 After HARD SPL it does'nt Power ON (only Bootloader )
IPL. 1.08.0001
SPL. 1.08.0001
any solution PLS...
i saw this >>> http://forum.xda-developers.com/showthread.php?t=417930 <<< thread, but some links there are not available...
can anybody have this, and put it here???
thanks in advance
oasisnhoa

Hmmm have you read stickies?

ai6908 said:
Hmmm have you read stickies?
Click to expand...
Click to collapse
Thanks, just only now, and i am also a newbie, and have dial up connection only ...
And what i find is, if anybody has a solution for this.... or give easiest solution how to make this.
And, if someone who tried that GOLDCARD, Pls. upload the file here....
Thanks In Advance

oasisnhoa08 said:
Thanks, just only now, and i am also a newbie, and have dial up connection only ...
And what i find is, if anybody has a solution for this.... or give easiest solution how to make this.
And, if someone who tried that GOLDCARD, Pls. upload the file here....
Thanks In Advance
Click to expand...
Click to collapse
You can't upload the Goldcard as it is dependant on the HARDWARE serial number on your SD card.

ivanmmj said:
You can't upload the Goldcard as it is dependant on the HARDWARE serial number on your SD card.
Click to expand...
Click to collapse
ahhh ok...
but you have some files there that can i use by making a GOLDCARD??? like this
4) Crypt-DES and XdaDevelopers-NbfUtils PERL packages
5) typhoonnbfdecode.pl PERL program
6) itsutils tools
Thanks In Advance...

Try http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard

ivanmmj said:
Try http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Click to expand...
Click to collapse
Hi...
i am sorry for my late reply, cause i find my friend who have WM...
Now my problem is... How can i see the SERIAL No. of memory card???
I try to use this application >>> http://www.wizcode.com/downloads/pocket_mechanic_professional,,, but it doesn't work...
pls... everybody help me for my problem... tnx
bR

Hello...
I am here again, forcing to make my HERA100...
I make a goldcard on QMAT and it says successful...
and check it to MTTY...
and here's the logs...
Code:
Cmd>set32
Invalid command : set32
For a help screen, use command ? or h
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1E580000 Bytes
SDInit---
SDInit OK
Unlimited time!
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
so whats wrong about that???
pls.. Help us..
bR

[Q] Led Lights Blinking

Well, a couple days ago I installed the Cyanogen Mod RC 2 via this topic. So, i found some problems (common bugs) such as wi-fi dont conecting, the led that lighs the screen blinking, proximity sensor and etc.
To fix these problems, i got this video from this tutorial and flashed the package from the tutorial. The problems were solved, except the led, that some times blinks and turns off randomly. What should I do? Is there any way to "format" and install an official firmware, or original files related to the LED lights to solve it?
Since now thanks!

estevaoem said:
Well, a couple days ago I installed the Cyanogen Mod RC 2 via this topic. So, i found some problems (common bugs) such as wi-fi dont conecting, the led that lighs the screen blinking, proximity sensor and etc.
To fix these problems, i got this video from this tutorial and flashed the package from the tutorial. The problems were solved, except the led, that some times blinks and turns off randomly. What should I do? Is there any way to "format" and install an official firmware, or original files related to the LED lights to solve it?
Since now thanks!
Click to expand...
Click to collapse
I have the same problem, actually I'm using the DDKQ6 2.3.4 ROM, I've installed a lot of other ROMS and i'm still trying to install one to fix the problem...
Any idea if it is a factory issue or it is a rom issue?
"My english is not so good because my default languaje is Spanish"

Just turn it off:
https://market.android.com/details?id=com.deskangel.kblight

Just flashed to CM7.2 by vo1 last night..
before that, I've been using BehradGH's Cm RC 2.2 without any bugs, all wi-fi and LED screen works just fine...

Brajano95 said:
Just turn it off:
https://market.android.com/details?id=com.deskangel.kblight
Click to expand...
Click to collapse
You need to turn off the LED lights to solve the problem. This ROM is known for this problem. Secondary solution is to flash another ROM such as ICS Sunday Final by jusada, which is one the best ROMs ever made.

Brajano95 said:
Just turn it off:
https://market.android.com/details?id=com.deskangel.kblight
Click to expand...
Click to collapse
Turn it off without any application:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Copy above script to /system/etc/init.d as 98button-backlight, set the permission to 755.
This is old CM7 issue and already solved. But feel free to use my above script, to save battery for an example. Latest stock firmware just have a annoying update, turning on the button light every time you touch the screen

ketut.kumajaya said:
Turn it off without any application:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Copy above script to /system/etc/init.d as 98button-backlight, set the permission to 755.
This is old CM7 issue and already solved. But feel free to use my above script, to save battery for an example. Latest stock firmware just have a annoying update, turning on the button light every time you touch the screen
Click to expand...
Click to collapse
1 more to go Ketut sir XD

EmoBoiix3 said:
1 more to go Ketut sir XD
Click to expand...
Click to collapse
I got 999 because of you
Edit 1: 1000 after a refresh
Edit 2: 1001 after the second refresh

ketut.kumajaya said:
I got 999 because of you
Edit 1: 1000 after a refresh
Edit 2: 1001 after the second refresh
Click to expand...
Click to collapse
I thanked you 4 times in a row LOL (making it 1002)

EmoBoiix3 said:
I thanked you 4 times in a row LOL (making it 1002)
Click to expand...
Click to collapse
LOL. Thanks friend.

ketut.kumajaya said:
LOL. Thanks friend.
Click to expand...
Click to collapse
All you have to do for me is to apply to be a recognised developer
Herpderp Adreno + Tegra.

ketut.kumajaya said:
Turn it off without any application:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Copy above script to /system/etc/init.d as 98button-backlight, set the permission to 755.
This is old CM7 issue and already solved. But feel free to use my above script, to save battery for an example. Latest stock firmware just have a annoying update, turning on the button light every time you touch the screen
Click to expand...
Click to collapse
Set permission to 755, what did you mean?
__________________________________________
http://forum.xda-developers.com/showthread.php?t=1387227
ahh
__________________________________________
Anyway, it doesn't work to me, I did exactly what you said. Wth?
__________________________________________
Why always something must not working for me? Yesterday I had The End 2.5, I applied transparent statusbar patch by zdunes (did exactly what was said in tutorial), and statusbar was black, and still had ghosting issue. After every reboot my theme (in theme chooser) was default, not miuiv4 (what was really annoying). Now I'm back to CM7.2 by vo-1 (signature) and after every reboot I must go to keyboard options to 'turn it on' cause if I don't do that my keyboard won't appear. AND NOW THIS. Backlight script isn't working. I think my phone doesn't like me.

thx
Thank you very much.

I solved the problem doing a factory reset and installing the OXFKT1 ROM. The wifi problem, blinking and black screen were solved.

ace_viknesh said:
You need to turn off the LED lights to solve the problem. This ROM is known for this problem. Secondary solution is to flash another ROM such as ICS Sunday Final by jusada, which is one the best ROMs ever made.
Click to expand...
Click to collapse
I just put carbon Sunday beta (by jusada) to my wife's ace. It is even better in my opinion. Also updated lagfree v3 to it. No problems and boy its smooth.
Sent from my GT-I9000 using xda premium

ketut.kumajaya said:
Turn it off without any application:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Copy above script to /system/etc/init.d as 98button-backlight, set the permission to 755.
This is old CM7 issue and already solved. But feel free to use my above script, to save battery for an example. Latest stock firmware just have a annoying update, turning on the button light every time you touch the screen
Click to expand...
Click to collapse
I tried doing it but..i think there is some problem in permissions as this script does'nt gets executed automatically while booting(restarting).
My permissions are rwxr-xr-x
But when i open with linux script handler in root explorer and execute it does its job.
so it means script is ok but it has some permissions problem.
plz reply
edit: got it fixed. permissions are correct.
dont knw why tht particular script file was not workin so i copied the two lines and pasted in some other working script kept thr in the same folder which finally worked.

ketut.kumajaya said:
Turn it off without any application:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Copy above script to /system/etc/init.d as 98button-backlight, set the permission to 755.
This is old CM7 issue and already solved. But feel free to use my above script, to save battery for an example. Latest stock firmware just have a annoying update, turning on the button light every time you touch the screen
Click to expand...
Click to collapse
man you forgot the semicolons hahaahha here's the right code:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness;
chmod 444 /sys/class/leds/button-backlight/brightness;

seanwlk said:
man you forgot the semicolons hahaahha here's the right code:
Code:
#!/system/bin/sh
echo 0 > /sys/class/leds/button-backlight/brightness;
chmod 444 /sys/class/leds/button-backlight/brightness;
Click to expand...
Click to collapse
Really? :laugh: :laugh: :laugh: My S5830 still lying around, thinking to update it to the latest official ROM after you inviting me here :laugh: :laugh: :laugh:
Please update your comment, please learn more about bash scripting

ketut.kumajaya said:
Really? :laugh: :laugh: :laugh: My S5830 still lying around, thinking to update it to the latest official ROM after you inviting me here :laugh: :laugh: :laugh:
Please update your comment, please learn more about bash scripting
Click to expand...
Click to collapse
this is the only way that works... i'm running touchwiz resurrection v9.5 and i checked up the already existing scripts and they all have the semicolons.... after put them the script started work

seanwlk said:
this is the only way that works... i'm running touchwiz resurrection v9.5 and i checked up the already existing scripts and they all have the semicolons.... after put them the script started work
Click to expand...
Click to collapse
No, no, no. My script is correct from the beginning. The most likely cause is Windows EOL (end of line). Windows uses carriage return and line feed as a line ending, which Unix uses just line feed. ROM modder mostly use Windows OS to create a modified ROM for Android and often unaware about this EOL derp

[MOD] Turbo boosted for wildfire...

Easy way to speed up your phone
Install instructions:
1. Install Root Explorer
2. Download boost.zip file and then unzip the that file and put in the SD card...
3. Open Root Explorer (Mounted on R / W) / SDCard / menu button / Multi-select / chose boost / Copy / system / bin / then click paste...
4. Open Terminal emulator and taype:
su
boost
5. Your phone is turbo boosted now, enjoy in new speed on your phone...
6. Press thanks if you like my work...
7. Rate my thread...

And what exactly does this "Turbo boost" do?

Have you got any benchmark results or evidence of an performance increase? I'm not giving an program/script root access to my phone, without some proof of an increase.

Upon opening the file with Notepad++ all it had inside was this
#!/system/bin/sh
# Adrenaline Boost
# Brought to you by [email protected] Developers
sync;
sleep 1
echo "3" > /proc/sys/vm/drop_caches;
sleep 1
echo "1" > /proc/sys/vm/drop_caches;
sleep 1
echo " ** Turbo Boosted ** ";
Click to expand...
Click to collapse
Which after some googling found out it does (from a similar script for desktop Linux):
Writing to this will cause the kernel to drop clean caches, dentries and inodes from memory, causing that memory to become free.
Click to expand...
Click to collapse

nejc121 said:
And what exactly does this "Turbo boost" do?
Click to expand...
Click to collapse
Your phone will be faster and working bether...

I just get permission denied in terminal.

spudata said:
I just get permission denied in terminal.
Click to expand...
Click to collapse
Did you type in "su" before "boost"?

Yes, granted su permissions but no joy.

Same thread posted on the i9000 development area. wth

Sorted, had to change permissions of boost file

Can anyone confirm this to work?
Sent from my HTC Desire using Tapatalk

RESERVED.
installed, will update tomorrow with any feedback.
UPDATE: have found it runs pretty much same as V6 Supercharger, drains battery horribly though.
I was on 54% battery last night, data & wifi off and killed tasks before going bed.. I checked CPU Spy, it had been in a deep sleep state for most of the night.
I awoke to a dead phone, which doesn't even happen on the v6 supercharger!
How do I uninstall this script, can I just delete the file from bin?

I tried this but I see no difference ... should i restart the device?
cm 7.2 rc1, smartassv2 264-710 MHz
edit: rebooted the phone....still no difference.....

To really see the benefits of the boost, you need to change the file permissions. Go into a root terminal and type:
chmod +t boost
This gives the boost Time Travel permissions. Now, all processes will be completed before you even run them. Talk about a turbo boost!!

Also set the date of your phone to whatever you want the open the dialer and type "#"#7925#"#" and you'll be timewarped into the future.
Sent from the year 2019 using my years old HTC Wildfire using xda premium

Ok just done a little digging around the op's other thread (which is now locked by a mod) on a different forum as he hasn't exactly explained what this does in any of them which leads me to believe he doesn't exactly know, and probably copied it from someone else, http://forum.xda-developers.com/showthread.php?t=1542602
What this does is clear the cache filesystem. 3 = free pagecache, dentries and inodes, while 1 = just free pagecache. Which in theory will decrease battery life as the cache needs to then be rebuilt afterwards.
This is already included in v6 supercharger so no need to use this if you have v6, just perform the engine flush or whatever its called whenever you want to free up some memory stuck in cache files. Its basically the same thing according to other users, I haven't looked to see if thats true or not but they sounded like they knew what they we're talking about so i believe them.

GlennBrownie said:
UPDATE: have found it runs pretty much same as V6 Supercharger, drains battery horribly though.
I was on 54% battery last night, data & wifi off and killed tasks before going bed.. I checked CPU Spy, it had been in a deep sleep state for most of the night.
I awoke to a dead phone, which doesn't even happen on the v6 supercharger!
How do I uninstall this script, can I just delete the file from bin
Click to expand...
Click to collapse
??

Yes delete and reboot.
Sent from my HTC Wildfire using xda premium

SeeZaar said:
Easy way to speed up your phone
Install instructions:
1. Install Root Explorer
2. Download boost.zip file and then unzip the that file and put in the SD card...
3. Open Root Explorer (Mounted on R / W) / SDCard / menu button / Multi-select / chose boost / Copy / system / bin / then click paste...
4. Open Terminal emulator and taype:
su
boost
5. Your phone is turbo boosted now, enjoy in new speed on your phone...
6. Press thanks if you like my work...
7. Rate my thread...
Click to expand...
Click to collapse
yea, 1star rated as u just copy my work.
Moreover, u didnt give full description and spoiled my fame and work, this should be useful for everyone if they know how to use tis properly

Thread closed as the OP DOESNT have permission fro yhe dev yo post this.
Also he failed to provide credits.
This on XDA is kanging and is not tolerated!!!

[Q] How to disable safe mode?

My phone have stucked in safe mode long time（so sad...）,because the volume button are very difficult to control.I try to research some information:
frameworks/base/policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
feMode= menuState > 0 ....................................." this line change into "mSafeMode = false "
So I extract system.sin from Adroid 4.3 TFT，and open it.But the file “frameworks” isn"t have base file,if I find,I also don't konw how to edit java file,replace the file and pack them...
Moreover，the file ”qwerty.kl“，if I delete the “key 114 VOLUME_DOWN"&"key 115 VOLUME_UP ",would I enter safe mode when boot？
Can anyone give me advice？I am not good at English，thanks a lot...

steps to make flashall_AFT working while flashing fastboot rom.

hello XDA,
this guide may worthless for some and at the same time may be life savior for others.
many of us including me have faced this issue that after extracting the fastboot firmware file when we get to click on falshall_AFT file it doesn't go as expected and do nothing.
here is the thing we can do to get it worked.
1. go to your system's my computer or this computer icon.
2. right click on it and open properties.
3. on the left pan there would be advance system setting option, click on it.
4. in the opened window look for Environment variables and click the button.
5. in system variables space look for Path variable.
6. select Path variable and click on edit.
7. in opened box now click on new button.
8. add C:\Windows\System32
9. click ok on every opened box.
10. go back to your firmware folder and now click on flashall_AFT file.
it should work now as expected and flash the rom and it's content it's own.
ps : thanks the post if it helps you.

i did this and still, nothing happens when i click the flashall_AFT.cmd file

freddymanson said:
i did this and still, nothing happens when i click the flashall_AFT.cmd file
Click to expand...
Click to collapse
try to run below command & share error message -
. /flashall_AFT.cmd

didnt work
nadeem_naddy said:
hello XDA,
this guide may worthless for some and at the same time may be life savior for others.
many of us including me have faced this issue that after extracting the fastboot firmware file when we get to click on falshall_AFT file it doesn't go as expected and do nothing.
here is the thing we can do to get it worked.
1. go to your system's my computer or this computer icon.
2. right click on it and open properties.
3. on the left pan there would be advance system setting option, click on it.
4. in the opened window look for Environment variables and click the button.
5. in system variables space look for Path variable.
6. select Path variable and click on edit.
7. in opened box now click on new button.
8. add C:\Windows\System32
9. click ok on every opened box.
10. go back to your firmware folder and now click on flashall_AFT file.
it should work now as expected and flash the rom and it's content it's own.
ps : thanks the post if it helps you.
Click to expand...
Click to collapse
complete all the steps but no luck , same problem there. flashall_AFT window open for 1 sec and close automatically.
---------- Post added at 02:32 PM ---------- Previous post was at 02:09 PM ----------
nadeem_naddy said:
try to run below command & share error message -
. /flashall_AFT.cmd
Click to expand...
Click to collapse
/flashall_AFT.cmd : The term '/flashall_AFT.cmd' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:2
+ /flashall_AFT.cmd
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (/flashall_AFT.cmd:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException

nadeem_naddy said:
try to run below command & share error message -
. /flashall_AFT.cmd
Click to expand...
Click to collapse
the error was
1 was unexpected at this time
Click to expand...
Click to collapse
if i just use flashall_AFT.cmd witout the ./ symbol i get this
flashall_AFT.cmd : The term 'flashall_AFT.cmd' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:1
+ flashall_AFT.cmd
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (flashall_AFT.cmd:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Suggestion [3,General]: The command flashall_AFT.cmd was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: ".\flashall_AFT.cmd". See "get-help about_Command_Precedence" for more details.
Click to expand...
Click to collapse
i tried ".\flashall_AFT.cmd" but it just says 1 was unexpected at this time

For me, it is working but I'm getting an error saying "target didn't report max download size".

freddymanson said:
the error was
if i just use flashall_AFT.cmd witout the ./ symbol i get this
i tried ".\flashall_AFT.cmd" but it just says 1 was unexpected at this time
Click to expand...
Click to collapse
using only file name won't help, shell needs a command to operate. try running flash_all_aft explicitly using command line.

Utsav_vats said:
For me, it is working but I'm getting an error saying "target didn't report max download size".
Click to expand...
Click to collapse
pls paste full error log coming on screen.

gur.gurdeep said:
complete all the steps but no luck , same problem there. flashall_AFT window open for 1 sec and close automatically.
---------- Post added at 02:32 PM ---------- Previous post was at 02:09 PM ----------
/flashall_AFT.cmd : The term '/flashall_AFT.cmd' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:1 char:2
+ /flashall_AFT.cmd
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (/flashall_AFT.cmd:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Click to expand...
Click to collapse
open the flashall_AFT.cmd in notepad++ and see what is there line 1 which is troubling. also pls tell me which window version you use. am not that pro but i will try to get a solution for you.

nadeem_naddy said:
open the flashall_AFT.cmd in notepad++ and see what is there line 1 which is troubling. also pls tell me which window version you use. am not that pro but i will try to get a solution for you.
Click to expand...
Click to collapse
using windows 10 Pro
this is the file:
@ECHO OFF
REM Version: V01
REM Date: 20180221
REM ============== USAGE ==============
REM flashall_AFT.cmd [Format option] [SN number]
REM [Format option]: 1=enable, 0=disable. default=0
REM Format userdata/cache
REM [SN number]: device SN number
REM Support multiple download image
Click to expand...
Click to collapse

freddymanson said:
using windows 10 Pro
this is the file:
Click to expand...
Click to collapse
REM is used to put comments in batch file. see where the actual script starts.

nadeem_naddy said:
REM is used to put comments in batch file. see where the actual script starts.
Click to expand...
Click to collapse
oh okay it is too long to paste here
@ECHO OFF
REM Version: V01
REM Date: 20180221
REM ============== USAGE ==============
REM flashall_AFT.cmd [Format option] [SN number]
REM [Format option]: 1=enable, 0=disable. default=0
REM Format userdata/cache
REM [SN number]: device SN number
REM Support multiple download image
REM ============== setting ==============
CLS
SET "dataerase=0"
SET "SSN="
SET "para="
SET "ERASEPARM="
set flash_raw=.\asus_flash_raw.exe
set fastboot=.\fastboot.exe
IF %1 EQU 1 ( SET ERASEPARM=-f )
IF %1 EQU 0 ( SET ERASEPARM= )
IF NOT [%2] EQU [] ( SET para=-s )
IF NOT [%2] EQU [] (
SET SSN=%2
)
call:flash
Click to expand...
Click to collapse

Still no luck
I think my problem is different ... Its opening but it's stopped on support all devices .... Please help

saidaivakar said:
I think my problem is different ... Its opening but it's stopped on support all devices .... Please help
Click to expand...
Click to collapse
Restore back old flashall_AFT.cmd and change the folder name to 8 char without spaces.
For eg. old folder name was "Asus Max Pro 2" just rename it to "asus" and try running flashall_AFT.cmd.

can't flash it's say write protected
any solution?

virgo79 said:
Restore back old flashall_AFT.cmd and change the folder name to 8 char without spaces.
For eg. old folder name was "Asus Max Pro 2" just rename it to "asus" and try running flashall_AFT.cmd.
Click to expand...
Click to collapse
Thanks brother it worked

freddymanson said:
oh okay it is too long to paste here
Click to expand...
Click to collapse
i also have the same problem so it only open for barely 1 sec and then gone...
i use win 7

marsianus said:
i also have the same problem so it only open for barely 1 sec and then gone...
i use win 7
Click to expand...
Click to collapse
did you find the solution yet?

I have used flashall_AFT.cmd for my zenpad.
open command prompt
go to directory where flashall_AFT.cmd is present
type command "flashall_AFT.cmd 1"
This will solve error of "1 was unexpected at this time"

virgo79 said:
Restore back old flashall_AFT.cmd and change the folder name to 8 char without spaces.
For eg. old folder name was "Asus Max Pro 2" just rename it to "asus" and try running flashall_AFT.cmd.
Click to expand...
Click to collapse
worked for me