Database Develop

Which Baseband Works Best For You?

I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.

battery drain is also very dependent on baseband. so do you want the one with best battery drain, best reception or best balance?

the baseband of the latest firmware which is via kies available in you region should be the best

for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch

CastagnaIT said:
for me the lastest XXKPM it has not changed to a lot in the several signals, the only obvious change is the 2G that now it goes very faster also in the switch
Click to expand...
Click to collapse
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.

EB2012 said:
I can confirm that, esp. for 2G
also battery drain is bit better now (before stock and KPK)
and call quality is better and that is what I like most of the new baseband. Less noise.
Click to expand...
Click to collapse
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=

pp910317 said:
i just flashed XXKPM, i find the signal become weak and unstable =.=...
the value of signal is always change too much...from 10asu to 23asu...=.=
Click to expand...
Click to collapse
in which country do you use it ?

texten said:
the baseband of the latest firmware which is via kies available in you region should be the best
Click to expand...
Click to collapse
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.

Joy` said:
So, the Baseband is change by country. Therefore XXKPM is really bad for me..
My matter is, There is no firmware for Turkey. Im searching for 3 days but couldnt find anything.
Click to expand...
Click to collapse
use a baseband from neighbours country/region or from a branded firmware of your region

base bands
texten said:
use a baseband from neighbours country/region or from a branded firmware of your region
Click to expand...
Click to collapse
Where can i find all baseband file download

zzozozo said:
Where can i find all baseband file download
Click to expand...
Click to collapse
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/

EB2012 said:
in which country do you use it ?
Click to expand...
Click to collapse
china

Many time after update baseband is necessary to wipe data to solve battery drain
GT-i9001 Shadow ROM 2.0.5
Skyhigh Undervolted
ICS Theme
smartassv2 sio i/o
tweaked governator

best modem
texten said:
you can try some basebands here:
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#ROM_parts
and you can flash a stock rom to get another baseband:
just register and search here for i9001:
http://www.sammobile.com/firmware/
or download here without account:
https://samsung-updates.com/device/?id=GT-I9001
or use this firmware download tool:
http://fus.nanzen.se/
Click to expand...
Click to collapse
tnx i just download the kpk version and install it (do i need any cash reset?)

pp910317 said:
china
Click to expand...
Click to collapse
KPM and the whole new stock ROM is made for regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

All Stock Rom's:
http://forum.xda-developers.com/showthread.php?t=948790
The usual modems are in the bottom of the 1st post. Worked all fine for me

For you, ZSJV1,,

I'm using XXKPM and it works like a charm for me. Don't know if it's a placebo or not, but i feel the wifi signal better when i'm far from the router, and also 2G is faster. Also calls are better. Less noise.
Sent from my GT-I9001 using xda app-developers app

XXXKPM works good for me, but is very similar to KPL baseband
Da tapatalk

Baseband problem on i9000. running I9000XXJVU
Joy` said:
I think the Baseband is much important in a Rom. I tried Lots of Baseband for me the best XXKPK. Someone telling XXKPG and the other one XXKPM etc. For example my phone connect with 11 Mpbs with KPM , 36 Mpbs with KPK in my garden same position.
Is there any app or something to try and get real results?
This should not be something relatively or the Baseband is not personel for me good and for other bad.
Lets make something with this Subject together.
Regards.
Click to expand...
Click to collapse
I lately installed 4.1.2 X-Bean 3.0 , kernel version 3.0.45-Semaphore_JB_2.3.0. I have no network (Mobile network not available). I live in Macedonia T-mobile sim card. How do i fix this problem.
I had cm10 4.1.2 and everything worked fine...
Thanks

[Q] loss of gsm signal

Hi guys, please I need some help with my xperia z, it presently does not get any network regardless of changing sim. Dis occurred few days after upgrading to newest firmware .67. It worked fine after some days but signal started gettin poorer.realised dat after givin the phone a little bump it comes back to full signal.eventually it stopped getting network altogether, except in rare cases when I feel I'm close to a tower , it searches but cannot register on the network sayin to ensure that a network signal is in range 99asu.I also cannot switch to manual select of network. Please anybody with a solution. Want to know if its a hardware or software problem. I don't have a sony service centre here that can help me.thanks

I had a similar issue and found that my "APN" was missing (Telcel Mexico). I created a new APN from information on the Internet and all is well.
Sent from my C6602 using XDA Premium 4 mobile app

gwithrow said:
I had a similar issue and found that my "APN" was missing (Telcel Mexico). I created a new APN from information on the Internet and all is well.
Sent from my C6602 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i doubt if its a similar issue. i dont get any signal at all

my brother it seems that the device is faulty... get it RMA'd

rohit25 said:
my brother it seems that the device is faulty... get it RMA'd
Click to expand...
Click to collapse
Pls what do you mean by RAM'd?

mibz said:
Hi guys, please I need some help with my xperia z, it presently does not get any network regardless of changing sim. Dis occurred few days after upgrading to newest firmware .67. It worked fine after some days but signal started gettin poorer.realised dat after givin the phone a little bump it comes back to full signal.eventually it stopped getting network altogether, except in rare cases when I feel I'm close to a tower , it searches but cannot register on the network sayin to ensure that a network signal is in range 99asu.I also cannot switch to manual select of network. Please anybody with a solution. Want to know if its a hardware or software problem. I don't have a sony service centre here that can help me.thanks
Click to expand...
Click to collapse
What model do you have??
You upgraded by PC Companion or by flashtool?? Maybe the baseband is incorrect and the phone don't have signal, maybe your carrier use two band and not both are in all coverage.

yamiAMR said:
What model do you have??
You upgraded by PC Companion or by flashtool?? Maybe the baseband is incorrect and the phone don't have signal, maybe your carrier use two band and not both are in all coverage.
Click to expand...
Click to collapse
Initially upgraded to .434 using flashtool, then .67 by OTA. By baseband do u mean 2g and 3g? Cos I don't get any form of signal at all.

Hi there, I have had the same problem: after updating the XZ to 4.2.2 (2.67 over OTA) the signal dropped instantly. Therefore I had to send it back Sony Care. They fixed it. The update has overwritten a different smallband/baseband-version above the other one, just as I suspected. I bet you can flash it yourself (your an XDA user..) instead of waiting 2 weeks or more. If you don't know how it works and you've absolutely no experience with flashing, just send it back to Sony care.
I think the easiest way is to flash a different (older) baseband-version on your XZ, reboot/factory reset and see if it works. The second method is to try downgrading the software to .244 INCLUDING the baseband-version, then update it by flashing the XZ to 2.67 while EXCLUDING the baseband-version. The third option is to re-flash (with flashtool) the 2.67 update but a different version (GLOBAL).
My phone details:
Modelnumber: C6603
Android-version: 4.2.2
Smallbandversion: 9x15A-ACEFWMAZQ-30110068-44
Kernelversion: 3.4.0g43a9ba9
Buildnumber: 10.3.1.A.2.67
Altough your smallband/baseband may differ from mine. Therefore, please find your own software-version. I'm using:
GLOBAL-LTE_10.3.1.A.2.67 (Netherlands)
Goodluck! Please let us know about your issue:fingers-crossed:.

mibz said:
Initially upgraded to .434 using flashtool, then .67 by OTA. By baseband do u mean 2g and 3g? Cos I don't get any form of signal at all.
Click to expand...
Click to collapse
But what Xperia Z model do you have?? C6603, C6602, C6606??
I have a similar situation in the case of C6603, in my carrier sometimes I have 2G signal but never 3G and other times no signal. In the case of OTA or PC Companion updates, sometimes upgrade to diferent model or carrier, I have a friend that upgrade his Xperia Arc by PC Companion but with the uncarrier firmware. Maybe this is your case, the OTA firmware don't well upgrade your base band.
In this case I suppose that you can flash only the baseband by Flashtool, but be carreful that the firmware was made for your Xperia Z (C6603, C6602, C6606).

yamiAMR said:
But what Xperia Z model do you have?? C6603, C6602, C6606??
I have a similar situation in the case of C6603, in my carrier sometimes I have 2G signal but never 3G and other times no signal. In the case of OTA or PC Companion updates, sometimes upgrade to diferent model or carrier, I have a friend that upgrade his Xperia Arc by PC Companion but with the uncarrier firmware. Maybe this is your case, the OTA firmware don't well upgrade your base band.
In this case I suppose that you can flash only the baseband by Flashtool, but be carreful that the firmware was made for your Xperia Z (C6603, C6602, C6606).
Click to expand...
Click to collapse
ok thanks i use a c6602

tally114 said:
Hi there, I have had the same problem: after updating the XZ to 4.2.2 (2.67 over OTA) the signal dropped instantly. Therefore I had to send it back Sony Care. They fixed it. The update has overwritten a different smallband/baseband-version above the other one, just as I suspected. I bet you can flash it yourself (your an XDA user..) instead of waiting 2 weeks or more. If you don't know how it works and you've absolutely no experience with flashing, just send it back to Sony care.
I think the easiest way is to flash a different (older) baseband-version on your XZ, reboot/factory reset and see if it works. The second method is to try downgrading the software to .244 INCLUDING the baseband-version, then update it by flashing the XZ to 2.67 while EXCLUDING the baseband-version. The third option is to re-flash (with flashtool) the 2.67 update but a different version (GLOBAL).
My phone details:
Modelnumber: C6603
Android-version: 4.2.2
Smallbandversion: 9x15A-ACEFWMAZQ-30110068-44
Kernelversion: 3.4.0g43a9ba9
Buildnumber: 10.3.1.A.2.67
Altough your smallband/baseband may differ from mine. Therefore, please find your own software-version. I'm using:
GLOBAL-LTE_10.3.1.A.2.67 (Netherlands)
Goodluck! Please let us know about your issue:fingers-crossed:.
Click to expand...
Click to collapse
thanks a lot, i'l try what u suggested, i know how to flash but dunno how i can do that without the baseband like u said, cos i already did a factory reset .i use a c6602 guess il find a version here that i can use.i'l hola at you if i hit any roadblocks cos i dont have esony care here.thanks a lot

mibz said:
ok thanks i use a c6602
Click to expand...
Click to collapse
Look this: C6602 10.3.1.A.2.67 STOCK
If you have doubts and I can help you tell me.

To find your version, just dial *#*#7378423#*#* => service info => software info => File system version: ......; download it from Xda and (re-)flash it. I've read about this; it happens a lot with XZ's with the GLOBAL firmware. You've probably the same version. Good luck and please let us know

tally114 said:
To find your version, just dial *#*#7378423#*#* => service info => software info => File system version: ......; download it from Xda and (re-)flash it. I've read about this; it happens a lot with XZ's with the GLOBAL firmware. You've probably the same version. Good luck and please let us know
Click to expand...
Click to collapse
hi, i jst re flashed with the 2.67 version the other guy posted in this thread, and its still not working, no network signal at all (0 dbm 99 asu), i realised i have the same baseband and kernel version with yours although i use a c6602. its global_hspa though.what do you think i should do next please. thanks

mibz said:
hi, i jst re flashed with the 2.67 version the other guy posted in this thread, and its still not working, no network signal at all (0 dbm 99 asu), i realised i have the same baseband and kernel version with yours although i use a c6602. its global_hspa though.what do you think i should do next please. thanks
Click to expand...
Click to collapse
Try to flash full firmware, because you don't have signal at all, maybe could be hardware issue. Cultural question, You try your sim card in another phone, don't you?

Okay I eventually found out what the problem was.it's a hardware problem, connection of the antenna near the vibrator, bottom right when lookin at back of phone was loose.thanks to all who posted suggestions.eventually opened it myself.

C6903 Indian ROM needed

Hello Guys,
I have been trying some firmwares lately and the KitSlim_AMG one has been great for me.
But I do get signal drops in between sometimes. Maybe some small issue.
So I wanted to switch to stock ROM for now.
I did search for a few C6903 roms, but the problem is they are not Indian ROM's and so whatever ROM i try to Flash, there is no signal reception on my phone. I have got a C6902 ROM but it doesnt work quite well, so I want only a C6903 ROM.
If anyone of you could get me a C6903 "INDIAN" Original ROM it would be very kind of you. I really need it soon.
Please ?
Thanks a lot for your help in advance.

[Q] Upgrading Baseband to 20C

There has been a fuzz lately about the new Baseband the LG has to offer us. Some people argue that by upgrading their baseband to 20C, the annoying problem with the RIL gets finally fixed, while others say that it's the same.
I am currently on CM11 M10, and my question is as follows:
Since I have RIL problems with my device and want to test out the new Baseband to see if it actually makes a difference, how can I (safely) do it?
From what I found out, 20C is only out for Italy and Germany. I live in Greece and I don't know if flashing a different country's Baseband would hurt my device. If someone would clarify that for me, that'd be great!
Also, the safest way to do it (as far as I know), is by flashing the kdz of 20C, and then re-flashing the ROM I was on previously (on my case CM11). Is that actually the way to do it? Are there any incompatibilities with 20C and CM11 M10?
Thank you in advance!
Some might find this questing a bit obvious, but since I've seen a lot of people complaining about RIL problems, while they haven't tried out 20C, I guess this will help them! :laugh:

amkirk94 said:
There has been a fuzz lately about the new Baseband the LG has to offer us. Some people argue that by upgrading their baseband to 20C, the annoying problem with the RIL gets finally fixed, while others say that it's the same.
I am currently on CM11 M10, and my question is as follows:
Since I have RIL problems with my device and want to test out the new Baseband to see if it actually makes a difference, how can I (safely) do it?
From what I found out, 20C is only out for Italy and Germany. I live in Greece and I don't know if flashing a different country's Baseband would hurt my device. If someone would clarify that for me, that'd be great!
Also, the safest way to do it (as far as I know), is by flashing the kdz of 20C, and then re-flashing the ROM I was on previously (on my case CM11). Is that actually the way to do it? Are there any incompatibilities with 20C and CM11 M10?
Thank you in advance!
Some might find this questing a bit obvious, but since I've seen a lot of people complaining about RIL problems, while they haven't tried out 20C, I guess this will help them! :laugh:
Click to expand...
Click to collapse
OK, first thing is that I don't know if it fixes the issues, I haven't had it before (I'm not using pin protection) so I just can't say if it's fixed.
Anyway there are no compatilility issues since Greece is in European Union and Germany too. (I think there are some certificates that prooves frequecy compatibility for EU so I think that must be same for all countries in EU - like me in Czech Republic, next to Germany)
CM runs same as on my stock baseband 20B but you can easily flash your old baseband back if you encounter any issues
I hope I helped you a bit, try and report yourself.
also you can backup your current data and rom in recovery and flash 20C + recovery (it will be wiped). Then you can restore your backup. Bootloader remains unlocked.

SuperLamic said:
OK, first thing is that I don't know if it fixes the issues, I haven't had it before (I'm not using pin protection) so I just can't say if it's fixed.
Anyway there are no compatilility issues since Greece is in European Union and Germany too. (I think there are some certificates that prooves frequecy compatibility for EU so I think that must be same for all countries in EU - like me in Czech Republic, next to Germany)
CM runs same as on my stock baseband 20B but you can easily flash your old baseband back if you encounter any issues
I hope I helped you a bit, try and report yourself.
also you can backup your current data and rom in recovery and flash 20C + recovery (it will be wiped). Then you can restore your backup. Bootloader remains unlocked.
Click to expand...
Click to collapse
Thank you for your response. So if I got this right, flashing a ROM (like CM) most of the times does not change my Baseband. My baseband remains the same from whichever I had from the KDZ, unless I flash a ROM that changes my Baseband (CM is not one of those). Is this correct?

amkirk94 said:
Thank you for your response. So if I got this right, flashing a ROM (like CM) most of the times does not change my Baseband. My baseband remains the same from whichever I had from the KDZ, unless I flash a ROM that changes my Baseband (CM is not one of those). Is this correct?
Click to expand...
Click to collapse
nope baseband is not related to rom, it's related to kdz (firmware from lg) you flash

SuperLamic said:
nope baseband is not related to rom, it's related to kdz (firmware from lg) you flash
Click to expand...
Click to collapse
I get it now. Thank you very much for your help! I'll test out 20C and I'll report back!

Just to let you guys know, I have updated my phone to V20C (Germany) and I cannot really tell the difference...

problem GPS roms

hi guys, Ive try all and is the same problem.... i downloaded a lot of roms2as 6.0 5.1.1 5.0.1 different persons and get the same... unfortunately
so my last try is find a way to substitute the firmware or baseband radio to cheers that GPA back again.
anybody have GPS issue if custom rom?? what rom you use without problems... my GPS never connect.. always still forever looking for connection and nothing... the smartphone sees satellite but do nothing..
I'm from Brazil and my phone is using
viper x v1. 2 mm 6.0
help me please...