Related
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
What method are you using to flash? Odin or safestrap? Do you have safestrap installed?
feelinfroggy23 said:
Hi im having difficulty restoring my g900a back to stock. i think i found the stock firmware from zedomax and it works but im still having a problem. on his video he is extracting ONE file but when i download the att firmware there is 4 and im pretty sure i need all the fiels to be flashed. is there a way to do that? here is the file http://galaxys5root.com/galaxy-s5-stock-firmware/
when i unzip there is 4 tar files. i did the biggest one but i think im missing the bootloader, recovery ect. please help anyone ive tried different stock firmwares on xda and all of them just fail. thanks guys.
Click to expand...
Click to collapse
It might be the actual stock ROM (I didn't check that particular file you mentioned) but in general the stock ROM for this phone comes in four files which begin with the following:
AP, CP, CSC, BL
You can load those in their corresponding spots in Odin (BL in bootloader, and so on)
Or you can head over to sammobile and download the stock firmware, which is a Samsung Kies dump file. This is one giant tar ball ( like the one in the video) which you'll just load into the PDA section of Odin 3.09 and flash away.
When you're clicking on ODIN are you running it as Admin? Also see the guy in the video using a USB 2 cable.
yes i am running as admin. it only works when i only use pda. when i put in the bl and csc and cp is keeps failing. after if flashed the pda file the phone reboots and freezes on the samsung screen. should i try doing it one by one?
it wont work still failing. should i flash one by one?
I did but i cant load it. i only get to the samesung logo and it freezes. only thing i can get into is download mode and the stock recovery. is there a way to boot into safestrap when phone is off? im running out of ideas and ive tried to do it on different computers and cords.
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
feelinfroggy23 said:
it seems like the bootloader file is the only one not working. do you have any idea? please please please help guys
Click to expand...
Click to collapse
Don't flash the bootloader and you should be fine
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Waiting4MyAndroid said:
Download the G900A_Downgrade_to_NCE.tar from here:
https://www.androidfilehost.com/?fid=23622183712464416
Use Odin 3.09 and flash in AP slot. Once it is done then take the OTA for NG3 then OA1
Thanks to @muniz_ri
Sent from my SAMSUNG-SM-G900A
Click to expand...
Click to collapse
the download says thats for the gs4?
feelinfroggy23 said:
the download says thats for the gs4?
Click to expand...
Click to collapse
It is the right tar. I have used it many times to go back to stock after root.
Sent from my SAMSUNG-SM-G900A
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
feelinfroggy23 said:
I tried that and it still freezes on Samsung logo. Does anyone have a legit firemware I've tried the ones on here or does anyone know how to get the one from sammobile? Really appreciating the help
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Use the G900A_DOwngrade_to_NCE.tar from this link http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and flash in the pda. that should fix your problem.
feelinfroggy23 said:
Can you walk me through your process please?
Sent from my RM-975_1005 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Download the G900A_Downgrade_to_NCE.rar. Unzip and you should get this file "G900A_Downgrade_to_NCE.tar.md5". Now Run Odin 3.09 as admin, and put your phone in download mode. In Odin click on the AP icon and point to the G900A_Downgrade_to_NCE.tar.md5. Wait until Odin finishes loading the file it takes some time. Plug usb cable to your phone while in download mode. Once Odin is ready click start. Wait until Odin is done. Your phone will reboot once the flash is done. Please Thank @muniz_ri for his hard work.
Yea. Prolly should have checked this forum before you went on the journey.
---------- Post added at 10:45 PM ---------- Previous post was at 09:56 PM ----------
Now, Instead of making sarcastic comments, I will provide some assistance. There is one thing left out of all of these tutes that took me a while to catch on to. As a result, my phone was doing the same thing.
When you follow the downgrade instructions, yes leave out the boot loader. Sometimes, the downgrade doesn't do the job properly, so you'll have to go to this thread, scroll to the very bottom post and you'll see a link for "G900A_NCE_Stock_Modem"
You will need to flash this along with the stock firmware. It should correct the boot issue. (Flash in PDA slot)
Furthermore, you will not be able to update via WiFi OTA. You'll have to download the official update files in .zip format.
Go to this thread for the " G900A_NCEtoNG3_OTA.zip" to update from NCE to NG3.
This next step is optional, but it won't hurt to try it. Go here and grab the stock NG3 modem and recovery. Flash each (one at a time) in the PDA slot.
My personal opinion of the 4.4.4 update is low. There are many issues with it. But if you're trying get the phone completely up to date then:
Go here for the final update.
You should now be set. Please thank @muniz_ri for his unrelenting dedication to helping others.
It is not my intention to be an ass, but you should begin with google, and then search entire AT&T forum before posting questions like this. Chances are, others have had the same problem, asked, and received a solution exactly like this.
Anyways, I hope I was able to guide you in the right direction...
Edit: It seems that both of the update zips are in the OA1 root guide thread.
P.S.
Your phone is from AT&T, right?
I don't know if other people have asked this question, but I read a lot about locked bootloaders (and yes, I've been there with my own phone xD) and they talk about how it's not really possible (?) to flash custom ROMs with phones like that.
I have an unlocked SM-G900A and I'm on T-Mobile, but I really need the Wifi Calling.
Will the bootloader think it's a non-verified custom rom?
I don't want to send my phone to Samsung again...lol
Thanks!
You should be fine, i'm running a tmo rom currently, not sure if WiFi calling would work though.
Sent from my twi5ted SM-G900A using Tapatalk
Rakuu said:
You should be fine, i'm running a tmo rom currently, not sure if WiFi calling would work though.
Sent from my twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
Thanks!
Also, before I start flashing, if anyone knows about Sammobile firmwares- do they have modems inside the .md5?
I have it ready but I don't really...uh...want to flash the modem if it's there. LOL so confused...I saw another forum where it said the modem was already inside the sammobile firmware file, but some say it's fine so...I honestly don't know... xD
luckyluke8168 said:
Thanks!
Also, before I start flashing, if anyone knows about Sammobile firmwares- do they have modems inside the .md5?
I have it ready but I don't really...uh...want to flash the modem if it's there. LOL so confused...I saw another forum where it said the modem was already inside the sammobile firmware file, but some say it's fine so...I honestly don't know... xD
Click to expand...
Click to collapse
Oh i didnt know you meant using odin for a rom, no i would avoid that, as for just normal g900t roms from the tmo section, yes you can do that with flashfire/safestrap/multisystem, i dont know about odin though, pretty sure it wont work.
Sent from my twi5ted SM-G900A using Tapatalk
Rakuu said:
Oh i didnt know you meant using odin for a rom, no i would avoid that, as for just normal g900t roms from the tmo section, yes you can do that with flashfire/safestrap/multisystem, i dont know about odin though, pretty sure it wont work.
Sent from my twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
Okay then. Thank you so much for telling me ahead of time (phew!)
luckyluke8168 said:
I don't know if other people have asked this question, but I read a lot about locked bootloaders (and yes, I've been there with my own phone xD) and they talk about how it's not really possible (?) to flash custom ROMs with phones like that.
I have an unlocked SM-G900A and I'm on T-Mobile, but I really need the Wifi Calling.
Will the bootloader think it's a non-verified custom rom?
I don't want to send my phone to Samsung again...lol
Thanks!
Click to expand...
Click to collapse
You can test the following if you would like try to run the latest T-Mobile OB1_5.0 Firmware as a virtual system (you must start the following process from rooted OC4):
Part-1: Install MultiSystem
1. Download the latest Multisystem.apk and Multisystem.zip.
2. Follow the Instructions to install MultiSystem.
Part-2: Install T-Mobile_OB1 5.0 Virtual System
1. Download the system_t-mobile_ob1.img.rar, extract the .img and place it onto your device (use either internal or external sdcard).
2. Use ES File Explorer (with root access enabled) to copy the system_t-mobile_ob1.img to the following folder: MultiSystem/img/system
3. From the MultiSystem app enable "Virtual System," Press "Update Configuration," then select the system_t-mobile_ob1.img under "Primary System IMG."
4. Press "Update Configuration" once again and reboot.
5. Once the Green led appears during reboot Press "Volume-Up" for about 2 seconds.
Your device should boot into the T-Mobile 5.0 Stock, Rooted, ROM.
muniz_ri said:
You can test the following if you would like try to run the latest T-Mobile OB1_5.0 Firmware as a virtual system (you must start the following process from rooted OC4):
Click to expand...
Click to collapse
Does anyone know if there's a root for ATT Galaxy S5 on 5.0 (OC4) ?
I want to try that out but my phone came with 5.0 so...
luckyluke8168 said:
Does anyone know if there's a root for ATT Galaxy S5 on 5.0 (OC4) ?
I want to try that out but my phone came with 5.0 so...
Click to expand...
Click to collapse
No root yet. Root just achieved on the S6 so hopefully the same exploit can be used on the S5 at some point. We'll see....
I tried rooting my galaxy note 3 at&t but i ended up bricking my phone.....now my phone only boots to galaxy note 3 logo with an opened padlock with inscription "Custom"........several attempts to flash stock 4.3 and 4.4 have failed....still the same results with padlock nd "Custom" inscription. .....pleaaaaaaaase help me fix my phone back[emoji22] [emoji22] [emoji22] [emoji22] [emoji22]
Thanks a lot
de_johnny said:
I tried rooting my galaxy note 3 at&t but i ended up bricking my phone.....now my phone only boots to galaxy note 3 logo with an opened padlock with inscription "Custom"........several attempts to flash stock 4.3 and 4.4 have failed....still the same results with padlock nd "Custom" inscription. .....pleaaaaaaaase help me fix my phone back[emoji22] [emoji22] [emoji22] [emoji22] [emoji22]
Thanks a lot
Click to expand...
Click to collapse
You try Odin NC2 files? http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136
Yes please....but still not working. ...same locked on Samsung Galaxy Note 3 boot logo screen
Rooted i747 said:
You try Odin NC2 files? http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136
Click to expand...
Click to collapse
Please is there some other wae out
de_johnny said:
Please is there some other wae out
Click to expand...
Click to collapse
If the phone won't boot it's the only way I know is to flash the four files with Odin.
Ohk....thanks for your help mate....very much appreciated
Phone boots to ATT ERROR
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.
can you get into stock recovery ?
I have and have reflashed. So far so good
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
dwarftoad said:
I have and have reflashed. So far so good
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
sounds good.
please can anyone help?
I cant find this anywhere.
I did the 5.1.1 update so not sure if I need the original or the updated one?
I think this is the one I had T817AUCU1AOH2
thank you
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
rredlin said:
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
Click to expand...
Click to collapse
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
so extracted the zip and put ap in Odin and it worked. but I have no cell signal no lte or anything. it shows att but nadda. did I do some wrong? should I have put all 4 files in the spots in odin?
also I found there is now an oem unlock. does that mean I can unlock this bootloader or get perm root? or twrp?
thanks
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
rredlin said:
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
Click to expand...
Click to collapse
well. I give up! for now......locked again. same as last time
rredlin said:
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
Click to expand...
Click to collapse
ikr im stuck over here
which one is the modem
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
which one is the modem
Man this worked great for me
Sent from my LGLS991 using XDA Free mobile app
Updating to Marshmallow FAILS... dm-verity verification failed... need to check drk
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
xdaDemiGod said:
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
Click to expand...
Click to collapse
Try Device Recovery with Kies. That's how I upgraded to Marshmallow.
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Same problem kinda
serik1986 said:
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Click to expand...
Click to collapse
Hello, I own samsung galaxy tab s2 SM-T817A baseband version
T817AUCU1AOH2
The problem is that it is stuck on lollipop and i think i need to insert att sim to get update but the problem is that i live in Pakistan i have tried many times to update it but nothing works for me.i have galaxy tab a t550 as well and it runs nougat.i need to get the 7.0 firmware for my tab s2 so i can flash it i cannot find the firmware anywhere else please help me to upgrade my tab s2 to nougat
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
colins said:
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
Click to expand...
Click to collapse
thx,i update my s2,it's free download.
This worked for me as well; was able to go straight from 5.1.1 (OH2) to 7.0 (QE2) via the link above and Odin 3.12.7. Didn't need to flash any intermediate versions.
houtaobbs said:
thx,i update my s2,it's free download.
Click to expand...
Click to collapse
Please upload to gdrive, link not work.
Thanks.
Alexander Kalinin said:
Please upload to gdrive, link not work.
Thanks.
Click to expand...
Click to collapse
Try this
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=28744
It's the same firmware as Colins'
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Link is up
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
vendo said:
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
Click to expand...
Click to collapse
It just pop up on servers some 30 min ago
Help.........!!!
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Does this require a phone to be on a specific version before flashing? Just want to be sure everything is good to go before moving forward.
**Edit** found answer by searching. (sorry to jump post heheh
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Did you unzip all 4 files all the way to md5 ?
norbarb did it again!
norbarb said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Click to expand...
Click to collapse
Thanks for another great post, norbarb!, your contributions are highly appreciated!
New update QE1
New update "925AUCS6EQE1" with May security patch is on the way...
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Now it´s working, I unzip all 4 files to md5, and then load the ROM successfully, but it stuck on black screen for about 30 min and never started, I had to go down to the previous version now with imei corrupt and now my cell phone no longer has signal, I do not know what went wrong or where I was wrong?
I flash this files in my g925aucu4dph5 phone, I will upgrade to nougat? What about ADB files? Do you have a video tutorial to this process?
just received my g925a 128GB version, currently has the build number LMY47X.G925AUCU3BOJ7, can i use Odin 3.10.6 and just flash this on it after zipping all 4 files down to md5? (bl, ap, cp, csc)??/
I'mgoing to assume it will not b rootabe after this? If so, to what firmware can i. should i update to so that I may root as flash some other ROM? What I really want to accomplish is just rid myself of all the AT&T bloat, as I do not use AT&T.......and would like to be a more newer version of android then 5.1.1
excuse of it seems nubish, but been using OnePlus One for 3 years now, and stumbled upon getting this phone on a great deal on getting this phone for $240.....so new to the samsung scene, but not to the rooting/bootloading unlocking flashing scene....
Also saw that another poster lost his storage flashing odin....something not cool on a 128gb device and another lost his imei....not cool either
Thanks for the update! Worked beautifully. Now waiting for may update.
Once you load these are we supposed to get updates from ATT? I ask b/c when I hit update it never finds anything and I don't have the most current OS I have the previous to current using these methods to update
has anybody done this without losing original storage or imei??? have a 128GB att edge and would not want this error to occur on mine...still in 5.1.1 build OJ7....
localization of 7.0 AT&T
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
ropotun said:
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
Click to expand...
Click to collapse
Yes you can
On Edge of Galaxy
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
36dbldz said:
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
Click to expand...
Click to collapse
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
norbarb said:
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
Click to expand...
Click to collapse
Do we need to be on a certain version before flashing this w/odin?
Sent from my SAMSUNG-SM-G925A using XDA-Developers Legacy app