Noob here. I need some help please. I installed the latest Xposed installer on a Asus TF700 running Crombi-KK RC 2. I installed several modules rebooted so everything would activate but after the home page came up there were no more soft keys at the bottomie: return, home, recent. I tried going into Closed to search some of the module settings to see if I could find the problem but if I open a setting to see if it could be responsible for the problem I can not back out because I do not have soft buttons. I tried stopping and disabling Xplosed in the settings/apps but could not back out that either for same reason, no soft buttons. The only think I can do is reboot but that has not solved my problem. Does anyone know which modules could be causing this problem? I also disabled my full screen app hoping that it had been enabled but it wasn't. Thanks.
Disable your modules one by one (open the Xposed installer, go to modules, disable one or more, select "Framework" from the drop down menu, then tap "Soft reboot"). No soft keys needed for that.
You can also temporarily disable them all, check the stuck thread for info on which key combo to use while your device is booting.
lartomar2002 said:
Noob here. I need some help please. I installed the latest Xposed installer on a Asus TF700 running Crombi-KK RC 2. I installed several modules rebooted so everything would activate but after the home page came up there were no more soft keys at the bottomie: return, home, recent. I tried going into Closed to search some of the module settings to see if I could find the problem but if I open a setting to see if it could be responsible for the problem I can not back out because I do not have soft buttons. I tried stopping and disabling Xplosed in the settings/apps but could not back out that either for same reason, no soft buttons. The only think I can do is reboot but that has not solved my problem. Does anyone know which modules could be causing this problem? I also disabled my full screen app hoping that it had been enabled but it wasn't. Thanks.
Click to expand...
Click to collapse
I'm struggling about get rid of the avigationbar, yet you already achieved that XDD
I guess that could because of UDN or Gravitybox
temp solution
lartomar2002 said:
Noob here. I need some help please. I installed the latest Xposed installer on a Asus TF700 running Crombi-KK RC 2. I installed several modules rebooted so everything would activate but after the home page came up there were no more soft keys at the bottomie: return, home, recent. I tried going into Closed to search some of the module settings to see if I could find the problem but if I open a setting to see if it could be responsible for the problem I can not back out because I do not have soft buttons. I tried stopping and disabling Xplosed in the settings/apps but could not back out that either for same reason, no soft buttons. The only think I can do is reboot but that has not solved my problem. Does anyone know which modules could be causing this problem? I also disabled my full screen app hoping that it had been enabled but it wasn't. Thanks.
Click to expand...
Click to collapse
if u cant recover from what you have done reboot into safe mode by holding power button and click and hold power off and click OK. :good:
after rebooting into safe mode. goto settings > apps and uninstall Xposed or clear its data.
Thanks, that is what did and now have soft keys. I did try disabling the navigation bar stuff in GravityBox but that did not work so I removed GravityBox but still using some of the other Xposed modules.
NO NO NO!
lartomar2002 said:
Thanks, that is what did and now have soft keys. I did try disabling the navigation bar stuff in GravityBox but that did not work so I removed GravityBox but still using some of the other Xposed modules.
Click to expand...
Click to collapse
gravitybox is awesome. dont uninstall gravitybox
goto gravitybox>Navigation bar settings and enable the master switch for the nav bar and check enable navigation bar. then rebbot and customize
hit the thanks button if u think i helped you (Y)
Did as you suggested and now everything is okay. I did those steps when I first installed GravityBox so I do not know what went wrong. The only thing I did differently is I did not update to the latest version, maybe that had something to do with it.:highfive:
Softkeys gone due to xposed
I hv sony xperia e1 rooted with latest version of xposed installed.
When i installed "Sergir Blurred System UI" module to get translucent notification panel My Softkeys went after the reboot. I disabled the module from xposed and uninstalled it but nothing worked for me. But when I opened xposed installer and in the framework tab I uninstalled the framework then everything worked fine even the keys came back. But I want to customise my phone with xposed and whenever I install framework my keys go away.
I hv even tried toggling immersive mode but it didn't work 4 me.
I tried clearing data of xposed from settings but that also didn't work.
Related
Hi,
A few days ago I flashed to Carbon ROM 4.4.4 from Novafusion.
Everything went smoothly until I tried to install/activate Xposed framework. (Without any modules active at that moment)
After the reboot, al my settings were set to default, the home button registers touches but does not redirect me to the homepage, the quick settings button doesn't react and my notification panel stays empty, whether there are notifications or not.
I performed a factory reset via TWRP and everything was back to normal. But Xposed framework had to be activated again. Tried it a second time, same results. So, is there a way to have a factory reset while keeping Xposed framework activated? Knowing never being able to use Xposed again would make me very very sad.
I looked into other threads concerning similar issues, but the only solution would be a factory reset, and that doesn't help me any further. Also, I haven't found a similar case wherein the issue was caused by activating Xposed framework.
Any help would be kindly appreciated.
coeurdefleur said:
Hi,
A few days ago I flashed to Carbon ROM 4.4.4 from Novafusion.
Everything went smoothly until I tried to install/activate Xposed framework. (Without any modules active at that moment)
After the reboot, al my settings were set to default, the home button registers touches but does not redirect me to the homepage, the quick settings button doesn't react and my notification panel stays empty, whether there are notifications or not.
I performed a factory reset via TWRP and everything was back to normal. But Xposed framework had to be activated again. Tried it a second time, same results. So, is there a way to have a factory reset while keeping Xposed framework activated? Knowing never being able to use Xposed again would make me very very sad.
I looked into other threads concerning similar issues, but the only solution would be a factory reset, and that doesn't help me any further. Also, I haven't found a similar case wherein the issue was caused by activating Xposed framework.
Any help would be kindly appreciated.
Click to expand...
Click to collapse
Are you using ART? Because Xposed isn't compatible with it, yet.
I tried flashing the sd23 ver85 Arm64 version but it doesn't install, either I flashed the wrong version or Xposed isn't yet working on the P9P? any idea which? thanks
Ok so it is working one just needs to change the value in one of the lines in the prop folder in System/EMUI.... before one flashes.
Which value, which line in which file in which folder? TA
Install Xposed apk, then go to System/Emui/Base/prop/ open local.prop, look for ro.config.hwtheme=1 change the 1 to a 0, then save. Then flash Xposed in TWRP (make sure to delete caches too) then reboot, takes a while but all is well afterwards with working Xposed.
Jostian said:
Install Xposed apk, then go to System/Emui/Base/prop/ open local.prop, look for ro.config.hwtheme=1 change the 1 to a 0, then save. Then flash Xposed in TWRP (make sure to delete caches too) then reboot, takes a while but all is well afterwards with working Xposed.
Click to expand...
Click to collapse
Hi!
I flashed xposed ver 86 in my vle-al10 (b176), but after I flashed it,the settings can not work , it cannot find my sim card too. Then I have rebooted it . Although I can open settings,i cannot call anybody. And i cannot open the multi-sim settings,too.
I rebooted it for about 3 times it goes well.
When i flash v85,in start it works well but after an hour,the things when i flash v 86 happened again.what should i do?
Sorry for my poor English.
---------- Post added at 12:20 AM ---------- Previous post was at 12:19 AM ----------
Jostian said:
Install Xposed apk, then go to System/Emui/Base/prop/ open local.prop, look for ro.config.hwtheme=1 change the 1 to a 0, then save. Then flash Xposed in TWRP (make sure to delete caches too) then reboot, takes a while but all is well afterwards with working Xposed.
Click to expand...
Click to collapse
Hi!
I flashed xposed ver 86 in my vle-al10 (b176), but after I flashed it,the settings can not work , it cannot find my sim card too. Then I have rebooted it . Although I can open settings,i cannot call anybody. And i cannot open the multi-sim settings,too.
I rebooted it for about 3 times it goes well.
When i flash v85,in start it works well but after an hour,the things when i flash v 86 happened again.what should i do?
Sorry for my poor English.
geekercai said:
Hi!
I flashed xposed ver 86 in my vle-al10 (b176), but after I flashed it,the settings can not work , it cannot find my sim card too. Then I have rebooted it . Although I can open settings,i cannot call anybody. And i cannot open the multi-sim settings,too.
I rebooted it for about 3 times it goes well.
When i flash v85,in start it works well but after an hour,the things when i flash v 86 happened again.what should i do?
Sorry for my poor English.
Click to expand...
Click to collapse
Happened to me as well, it turned out to be one of the modules I had running.
Disabled & removed it, and it worked fine afterwards.
Also happened once more since, just disabled (but not remove) all modules, as I cbf going through each one, and then re-enabled them. Been working fine ever since.
Only issues I've had, one of which I can't really pinpoint to Xposed, is the Themes app keeps crashing if I try swipe away from the main page. Then again I don't use it, so not a huge loss to me. The other is GravityBox > Navigation Key Tweaks, I had double tap Recent Apps set to some action, and it's now stopped working and acts as per normal.
djyoshii said:
Happened to me as well, it turned out to be one of the modules I had running.
Disabled & removed it, and it worked fine afterwards.
Also happened once more since, just disabled (but not remove) all modules, as I cbf going through each one, and then re-enabled them. Been working fine ever since.
Only issues I've had, one of which I can't really pinpoint to Xposed, is the Themes app keeps crashing if I try swipe away from the main page. Then again I don't use it, so not a huge loss to me. The other is GravityBox > Navigation Key Tweaks, I had double tap Recent Apps set to some action, and it's now stopped working and acts as per normal.
Click to expand...
Click to collapse
what means “cbf”?
---------- Post added at 08:31 AM ---------- Previous post was at 08:30 AM ----------
djyoshii said:
Happened to me as well, it turned out to be one of the modules I had running.
Disabled & removed it, and it worked fine afterwards.
Also happened once more since, just disabled (but not remove) all modules, as I cbf going through each one, and then re-enabled them. Been working fine ever since.
Only issues I've had, one of which I can't really pinpoint to Xposed, is the Themes app keeps crashing if I try swipe away from the main page. Then again I don't use it, so not a huge loss to me. The other is GravityBox > Navigation Key Tweaks, I had double tap Recent Apps set to some action, and it's now stopped working and acts as per normal.
Click to expand...
Click to collapse
what means cbf?
---------- Post added at 08:39 AM ---------- Previous post was at 08:31 AM ----------
djyoshii said:
Happened to me as well, it turned out to be one of the modules I had running.
Disabled & removed it, and it worked fine afterwards.
Also happened once more since, just disabled (but not remove) all modules, as I cbf going through each one, and then re-enabled them. Been working fine ever since.
Only issues I've had, one of which I can't really pinpoint to Xposed, is the Themes app keeps crashing if I try swipe away from the main page. Then again I don't use it, so not a huge loss to me. The other is GravityBox > Navigation Key Tweaks, I had double tap Recent Apps set to some action, and it's now stopped working and acts as per normal.
Click to expand...
Click to collapse
and can you tell me how to do to solve this problem more clearly? thanks.
What modules are u running in xposed?
sent from my P9+
For Xposed, try Wanams custom build
http://forum.xda-developers.com/showthread.php?t=3180960
If you read the changelog, you'll see, that it's optimized for Huawei Theme Engine, too. Works flawless 4 me.
Gesendet von meinem VIE-L09 mit Tapatalk
hi all
i used the official xposed framework before i noticed a wanam version which support theme engine of huawei , now i cannot re-enable huawei them engine , i tried to add the line of ro.config.hwtheme and ro.config.hwtheme to build.prop , but still no effect
any advise ?
leofungwai said:
hi all
i used the official xposed framework before i noticed a wanam version which support theme engine of huawei , now i cannot re-enable huawei them engine , i tried to add the line of ro.config.hwtheme and ro.config.hwtheme to build.prop , but still no effect
any advise ?
Click to expand...
Click to collapse
That would probably explain why Themes keeps crashing every time i try to swipe within the app.
Should also probably note that I haven't had any Xposed issues since the last time i posted, but I don't really jump into it anymore as I've got almost everything running just how i want.
[WILL NOT WORK ON ANDROID N]
There is no functional Xposed for Nougat (yet)
Hey everyone!
Since there is no dedicated thread for how to install Xposed for the P9 Lite yet, I thought I quickly provide the method how I made it work for future users.
What you need?
- Unlocked BL
- TWRP Installer
- Root
So you want to get the version of Xposed provided by Wanam. Version 86 for arm64 is what you are looking for! You can get it here.
UPDATE: I experienced extreme battery drain and crashing settings with version 86. I am now using version 84 and all is fine again.
Don't worry that it says Samsung devices in the thread.
Download the zip package that you need and place it somewhere. Then download the Xposed installer apk.
For example here in the first post attached.
Install the apk.
Now it's time to fire up TWRP and make a backup!
Then flash the zip you have downloaded before. If you downloaded the right version, it should flash without errors.
Now reboot. BE PATIENT. It can take several minutes for the first boot.
That's it. You should now be able to use Xposed modules like enabling background play on official YoutTube app :victory:
Sidenote: some people mentioned that you may need to switch your SELinux mode to permissive. Since I had it on permissive in the first place I don't know if it's really the case.
PS: leave a like for the guys providing these awesome Xposed frameworks if you download them :good:
Hey man, some days ago i tried to install this on my p9 lite. I got bootloop caused by "not enough space" (with more than 6GB of free space) error during the installation of the framework. Any suggetion? Maybe we need a new partition system?
Zeph1990 said:
Hey man, some days ago i tried to install this on my p9 lite. I got bootloop caused by "not enough space" (with more than 6GB of free space) error during the installation of the framework. Any suggetion? Maybe we need a new partition system?
Click to expand...
Click to collapse
Hmm I did not encounter something like this. However, I did receive some errors earlier with backups in TWRP. Maybe there is a bug in this TWRP version for this device.
Afaik it is ported from the Chinese version of the P9 Lite so I don't really know who is working on this.
But it is strange. Have you tried to flash it a second time? Maybe just a weird bug?
Since I was able to install it just fine...
Uhm, i'm bit afraid cause i have done a full reset after that problem. I think i will wait before doing it again
just installed ,xposed-v85.1-sdk23-arm64-custom ,on L21 and works fine for now
thanks
what modules are you running?
l31
guys does this package works on l31 phones because I got already a bootloop with the l21 guide mentioned above..ty
Yes, i've done it like mentioned above and its working perfectly on my l31. As you see on my Screenshots. Authentication Info with the xposed Flat Style bar indicators and coloured Bars. But after flashing the Framework the Bootlogo showed up for around for 15minutes before booting up. I thought I got stuck in Boot. An started thinking of reflash my Backup. But it booted and its working.
Also getting bootloop on my L31 - complains about not enough space on device when trying to flash.
Hello all just have a quick question which better to use the xposed-v86.0-sdk23-arm64-custom-build-by-wanam-20160709 or xposed-v86-sdk23-arm64 version or does it matter? Thanks..
lilbrat said:
Hello all just have a quick question which better to use the xposed-v86.0-sdk23-arm64-custom-build-by-wanam-20160709 or xposed-v86-sdk23-arm64 version or does it matter? Thanks..
Click to expand...
Click to collapse
You need the version by Wanam.
Psierra117 said:
Yes, i've done it like mentioned above and its working perfectly on my l31. As you see on my Screenshots. Authentication Info with the xposed Flat Style bar indicators and coloured Bars. But after flashing the Framework the Bootlogo showed up for around for 15minutes before booting up. I thought I got stuck in Boot. An started thinking of reflash my Backup. But it booted and its working.
Click to expand...
Click to collapse
I can't get Flat Style Colored Bar on the navigation bar no matter what I do. Does it work for you?
Memovic said:
I can't get Flat Style Colored Bar on the navigation bar no matter what I do. Does it work for you?
Click to expand...
Click to collapse
I'm using Xstana for status bar and navigation buttons and working fine for me
As far as I know the official and latest version of Xposed works in Huawei, You just have to disable themes in build.prop
Check this out:
http://forum.xda-developers.com/showpost.php?p=66380010&postcount=30
The flatstyle colored Bars is working without problems. Version 2.1.0 its changing Statusbar color like orange on xda and red on YouTube. An the navbar changes between white Grey and black or transparent depending on Main brightness of the whole window. I've had installed xposed-v86.0-sdk23-arm64-custom-build-by-wanam-20160709 like mentioned above. And I first thought I got stuck in Boot loop But it run for around 15 minutes before the system booted up. Let it settle and before booting clean Cache and Dalvik.
Schlengge said:
Hey everyone!
Since there is no dedicated thread for how to install Xposed for the P9 Lite yet, I thought I quickly provide the method how I made it work for future users.
What you need?
- Unlocked BL
- TWRP Installer
- Root
So you want to get the version of Xposed provided by Wanam. Version 86 for arm64 is what you are looking for! You can get it here.
Don't worry that it says Samsung devices in the thread.
Download the zip package that you need and place it somewhere. Then download the Xposed installer apk.
For example here in the first post attached.
Install the apk.
Now it's time to fire up TWRP and make a backup!
Then flash the zip you have downloaded before. If you downloaded the right version, it should flash without errors.
Now reboot. BE PATIENT. It can take several minutes for the first boot.
That's it. You should now be able to use Xposed modules like enabling background play on official YoutTube app :victory:
Sidenote: some people mentioned that you may need to switch your SELinux mode to permissive. Since I had it on permissive in the first place I don't know if it's really the case.
PS: leave a like for the guys providing these awesome Xposed frameworks if you download them :good:
Click to expand...
Click to collapse
Thank you! For me works fine. Some modules for Xposed, please!
adifa said:
Thank you! For me works fine. Some modules for Xposed, please!
Click to expand...
Click to collapse
I don't use a lot of modules... What I do use and highly appreciate is Xprivacy, Greenify and DoubeTapToSleep.
Schlengge said:
I don't use a lot of modules... What I do use and highly appreciate is Xprivacy, Greenify and DoubeTapToSleep.
Click to expand...
Click to collapse
Thank you very much!
Trimis de pe al meu HUAWEI VNS-L21 folosind Tapatalk
I've installed the official version and it's working like a charm.
Hi, my phone version is VNS-L31/ B105 (Wind branded).
I can confirm everithing is working just fine after installing official xposed apk from the official thread
(http://forum.xda-developers.com/showthread.php?t=3034811) and flashing the last framework "xposed-v86-sdk23-arm64.zip" from the link in the same thread.
No errors reported during flashing, albeit i just have to wait 5-10 minutes during rebooting before the UI to appear.
I'll give you some tips on some issues i dealt with and some modules i've installed:
1) "DoubleTapToSleep - working
2)GravityBox - not everything is working, i've just set the hardware keys actions to run some applications, but the recents key isn't working as default setting. Power tweaks section isn't working too. QuickSettings aren't working even disabling the two strings in build.prop file.
3)If you want an advanced reboot menu then try the module "NeoPowerMenu". in order to make it working you have to go in advanced settings and enable the function "ExperimentalPhoneWindowManager hook" then reboot and it should be working.
4) XPrivacy - working
5) i experienced problems with some apps that need to stay in background like ZDcalendar for if I close the app from the Recent apps window, the alarms or notifications scheduled are not notified. I suppose it's due to battery saving settings. I solved going to the app section--->then the app I want to manage--->battery--->enabling "keep running after screen off".
i had the same problem with the app Twilight, in fact when i closed the recent apps from the recents window, the app just shut down.
enabling the function mentioned above will prevent the app from closing unless you kill it manually.
Hope this will help, bye!
Is it still required to deodex the ROM to install edxposed on stock Android one?
Because I can't find information that are up to date
it works!
It's not needed to deodex the ROM anymore just flash the magisk modules in this order:
Riru core
Edxposed
Reboot
Also gravit box [p] works not everything but still
I admit I was a little nervous but this information is missing and needed to be tested, I'm on August security patch 10.0.12
I installed it without deodexing and used it for blocking wake locks with the good old Amplify.
Go ahead and install it
rahulmanpur said:
I installed it without deodexing and used it for blocking wake locks with the good old Amplify.
Go ahead and install it
Click to expand...
Click to collapse
Are you experiencing a second reboot when you turn the phone on?
Whenever I power on the phone I unlock it and first time I try to open an app it reboots and then continue to function normally
blazessdd said:
Are you experiencing a second reboot when you turn the phone on?
Whenever I power on the phone I unlock it and first time I try to open an app it reboots and then continue to function normally
Click to expand...
Click to collapse
For me too. I think its normal. I get a third reboot with GravityBox Module installed
I also tried xposed on my a2.. I don't think it does any extra things for us! When first time i tried xposed on my phone and installed some modules reboot my phone to activate them. I got soft brick kinda thing. And using gravity box or max lock makes device much buggier.
I was able to do this on another phone but was wondering if it's possible on this phone. I would like to hold the back button to force close app.
you need to root the phone, instal xposed and gravity box module
NVM I got it working thanks
dvijetrecine said:
you need to root the phone, instal xposed and gravity box module
Click to expand...
Click to collapse
I've rooted already but had trouble getting Xposed to work, do you have any links for Xposed?