Camera not working on CM 11 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi, some days before I installed the CM 11 on my device, and all it's fine except for the camera, when I try to use it it appears a message error that says: Sorry, the camera cannot be accesed.. Also I downloaded an app named CM Camera Fixor something similar... I've searched for information and posts but nobody has given me a solution.
My CM version: http://forum.xda-developers.com/showthread.php?t=2579431
My kernel version: http://forum.xda-developers.com/showthread.php?t=2183378

AS16 said:
Hi, some days before I installed the CM 11 on my device, and all it's fine except for the camera, when I try to use it it appears a message error that says: Sorry, the camera cannot be accesed.. Also I downloaded an app named CM Camera Fixor something similar... I've searched for information and posts but nobody has given me a solution.
My CM version: http://forum.xda-developers.com/showthread.php?t=2579431
My kernel version: http://forum.xda-developers.com/showthread.php?t=2183378
Click to expand...
Click to collapse
Do you have the same problem with the stock Kernel?

kalpetros said:
Do you have the same problem with the stock Kernel?
Click to expand...
Click to collapse
Yes, that's why I downloaded the second one, to try but it's the same

Install another rom
Sent from my GT-I9000 using XDA Free mobile app

DJdarkster said:
Install another rom
Sent from my GT-I9000 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your great advice, i don't know what I could do without that gorgeous answer

Which version of CM 11 did you install? Also which ROM did you use prior to CM 11?

kalpetros said:
Which version of CM 11 did you install? Also which ROM did you use prior to CM 11?
Click to expand...
Click to collapse
I installed the one in the link.. then I wiped it and installed SlimCM 11 which runs better but the camera is still off.. I think i'm gonna take it to the support shop after i try to fix it with some samsung drivers.. And the previous ROM was the stock one, gingerbread I think, anyway thakns for the aid

AS16 said:
I installed the one in the link.. then I wiped it and installed SlimCM 11 which runs better but the camera is still off.. I think i'm gonna take it to the support shop after i try to fix it with some samsung drivers.. And the previous ROM was the stock one, gingerbread I think, anyway thakns for the aid
Click to expand...
Click to collapse
I would go back to stock to see if the camera is working. If not then it might be a hardware issue.

Related

[Q] Mi 410 camera issue

hi out there, anyone of you facing the camera failure??
i'm currently using RC2, restarted my mobile more than 20 times, changed other ROM still cant make my camera works....
anyone hv solutions on this??
million thanks...
Hmm... do you install the rom through CWM on a proper procedure? Coz i have no problems at all...
Sent from my CSL-MI410 using XDA Premium App
It was fine when i rooted last month, only happened last 2day when i ean to use it
If u could elaborate how u install the RC2, maybe i could help n find the solution for u.... its quite simple actually... sometimes slight mistake in installing, can make it go wrong... i know coz i have been doing it since i got my xperia x8 a year ago... if u cn try to install rc1 first then upgrade to rc2...
Sent from my CSL-MI410 using XDA Premium App
ya, I'm upgrading from rc1 to rc2, as follow the step provided from lyn
blackode said:
If u could elaborate how u install the RC2, maybe i could help n find the solution for u.... its quite simple actually... sometimes slight mistake in installing, can make it go wrong... i know coz i have been doing it since i got my xperia x8 a year ago... if u cn try to install rc1 first then upgrade to rc2...
Sent from my CSL-MI410 using XDA Premium App
Click to expand...
Click to collapse
hi
this is something i have not done u mean
1.flash rc1 via CWM
2.flash rec2 via CWM from rc1
and this would make RC2 work better
i usually have flashed RC2 strait via CWM
kindly explain on the same
works fine with rc2...
sent from my Spice MI-410 XDA Premium
haree said:
hi
this is something i have not done u mean
1.flash rc1 via CWM
2.flash rec2 via CWM from rc1
and this would make RC2 work better
i usually have flashed RC2 strait via CWM
kindly explain on the same
Click to expand...
Click to collapse
flash rc1 via CWM? weird... i flash my rc1 using SUT software as the file was in .nbo then start flashing rc2 via CWM. i wouldnt dare to flash rc2 straight because from my opinion, rc1 is a base firmware and therefore i think its best and play safe to go a long way rather to be sorry.
blackode said:
flash rc1 via CWM? weird... i flash my rc1 using SUT software as the file was in .nbo then start flashing rc2 via CWM. i wouldnt dare to flash rc2 straight because from my opinion, rc1 is a base firmware and therefore i think its best and play safe to go a long way rather to be sorry.
Click to expand...
Click to collapse
install over rc1 only i suffered huge losses due to flashing rc2 over stock rom..
nd by losses i mean
camera dont work fine
fm not working "force close"
facebook not working "essential for me"
and also there are so many system issues as rc2 and stock rom are diffrently build try first rc1 and then upgrade to rc2
hmn.. i tried Cherry Mobile Magnum HD now, still the same, i deleted the stock Camera from root n installed camera360, still cant use, anyone hv stock camera.apk??
Same Here, can somebody help us
Camera suddenly stopped working tried Camera zoom fx, camera 360 etc
Using MIUI
tarunongo said:
Same Here, can somebody help us
Camera suddenly stopped working tried Camera zoom fx, camera 360 etc
Using MIUI
Click to expand...
Click to collapse
if it is MIUI,try freezing Google Talk as in the previous version. I got mine working after doing the same.
I face the same problem camera crashed when i tried to turn the front one on then right after no any camera app can open it and not responding, forceclose all the time. I use ROM CM7.1.0 by Napstar. Help me fix this pls.
Sent from my CSL-MI410 using XDA App
Why Dont You Try Reflashing Stock ROM
pittms said:
I face the same problem camera crashed when i tried to turn the front one on then right after no any camera app can open it and not responding, forceclose all the time. I use ROM CM7.1.0 by Napstar. Help me fix this pls.
Sent from my CSL-MI410 using XDA App
Click to expand...
Click to collapse
It's probably the kernel problem. Just like mine, but I'm using MIUI, MIUI kernel 1.9.30 has the same bug, the latest kernel (1.10.21) fix the camera and work again.
Just like deatbearer said, you've to flash stock ROM or Andro-ID RC2 or MIUI 1.10.21.
Thought a lot about purchasing this mobile as it known having issues with camera, however decided to get it.
Got this phone few hours back, verified at the spice outlet whether camera is working or not, was working there.. Back to office and camera got frozen, showing black screen...
In the mean time, was playing with screen (live wallpapers) and suddenly camera application got invoked (not sure how) & working fine - able to take snaps ... again after 30 mins..i tried camera and again it start showing black screen....
Upgraded to gingerbread from spice site... and camera is good now... not sure how to fix the camera if goes black again & i didn't do anything earlier to fix it... it was all by itself switching to cooperative & non-cooperative modes ...
hi i m using mi 410 my camera quality is bad, how to improve camera quality and how to change icons? i tried change icon many time but not changed....
CacingKalung said:
It's probably the kernel problem. Just like mine, but I'm using MIUI, MIUI kernel 1.9.30 has the same bug, the latest kernel (1.10.21) fix the camera and work again.
Just like deatbearer said, you've to flash stock ROM or Andro-ID RC2 or MIUI 1.10.21.
Click to expand...
Click to collapse
Thank you very much for the advice. But where can I download the kernel or do you have the link to download. One more thing, besides kernel update do I have to flash stock ROM too and how to flash it? Sorry I'm not so good at this. So beginner I am. Thank you very much.
Sent from my Triumph using XDA App
pittms said:
Thank you very much for the advice. But where can I download the kernel or do you have the link to download. One more thing, besides kernel update do I have to flash stock ROM too and how to flash it? Sorry I'm not so good at this. So beginner I am. Thank you very much.
Sent from my Triumph using XDA App
Click to expand...
Click to collapse
Yes, I think you have to flash that ROM. Just like you flash your CM7, use Andro-ID RC2.
was getting a lot of camera problems on stock firmware,
so flashed it with RC2... never had the problem again
Was working Fine on MIUI too
now using CM7 Still Working

[Q] streaming flash content cm10.1 4.2.2 issue

Any help would be greatly appreciated.Hello all thank you for you time. I'm running cm10.1 unofficial nightly build 05.22.13 on my touchpad with the latest adobe flash apk and Firefox app from Googleplay.
The issue that I'm having is my display would go to sleep as configure per my display setting while I'm streaming flash content at full screen. Not sure why this is happening and not sure if this is just my device. I didn't have this issue with cm9. Only notice this with cm10 and now 10.1. Theodd thing is that this issue is also happening with my nook color and nexus 7 with cm10.1
My current work around is setting display to time out 30 mins and touch the display every now and then.
Any help would be greatly appreciated
Thanks again
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
https://play.google.com/store/apps/details?id=it.android.keepscreenon
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
gradular said:
imanobe said:
Flash is being phased out and anything past 4.1 either doesnt work or partially works.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse
nickster1 said:
gradular said:
Flash is phased out but that doesn't mean you can't get it to work well. Its working great for me on my phone and tablet. Both running 4.2.2
Click to expand...
Click to collapse
I,ve been flasing custom roms since the touchpad and nook color was out so i'm curious to know what I did wrong with these installs. I've had this issue happened to me with multiple devices. Nexus 7 nook color and my touchpad . All install were done with complete wipe of device.
Click to expand...
Click to collapse
imanobe said:
nickster1 said:
I did a quick search and found this app for you. I haven't tried it, but its worth a try.
Thank you. I went back to cm9 for stability but will keep this app in the back pocket . I was just curious to know if I was the only one experiencing this flash problem or its the same for everyone else. If its just me I wonder wat I did wrong with the install
Click to expand...
Click to collapse
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse
spunker88 said:
imanobe said:
Flash has never worked well on 4.1+ ROMs on the Touchpad in my experience. Flash isn't supported on 4.1+ but on other devices its still smooth so its a Touchpad Android issue not a Flash issue.
If you want Flash stay with CM9. I went back to CM9 after being on CM10 a while because I wanted stable Flash and couldn't really think of any new CM10 features that I needed.
Click to expand...
Click to collapse
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse
imanobe said:
spunker88 said:
First and foremost thank you for your input. It is true that flash is no longer supported on 4.1 + but it can and should be stable once installed. One example I can provide is with my nexus seven. With stock rom and latest flash APk installed it runs Smoth no problem but when it is rooted and custom rom installed display issue occurs. There must be some config in the rom where display would remain awake when certain apps are running at full screen. Also its hard to see that its a touch pad issue because this is happening to other devices that I've installed custom 4.1+ rom. I'm currently back with cm9. For stability until cm 10.1 is more stable will switch.
Click to expand...
Click to collapse
Samsung probably built in some code to be more flash-compitable.
Sent from my TouchPad using xda app-developers app
Click to expand...
Click to collapse
Flash runs smooth on my Droid3 with CM10.1 even though the rom is far from stable. Also runs well on the Razr with stock 4.1.2 update. Its just on the Touchpad that 4.1+ have issues with flash in my experience.
Sent from my cm_tenderloin using Tapatalk HD

tired of samsung jb 4.1.2..please help

guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
Look for cm10.1, you can install it from stock recovery and no need to root before.
Sent from my GT-I9070 using Tapatalk
heartbrake said:
guys i am sick and tired of samsung jb 4.1.2 ddulp8..my dialer app lags(takes 6 seconds to load up sometimes) this is annoying..messaging/contacts app lags..and my whole phone freezes sometimes..wifi doesnt connect, keeps on getting obtaining ip address and this is a bug in samsung 4.1.2 firmwares as i confirmed it on youtube..i didnt have these issues in gingerbread..this stock JB rom eats so much RAM and it sucks..if was afraid of rooting my phone but no more..can someone suggest a better FIRMWARE ?? please help me out here..thanks
Click to expand...
Click to collapse
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
dagger said:
try the cm10.2 or cm10.1 by team canjica.
they are super fast..
you can find more info on how to install it in the rom thread..
good luck..
Click to expand...
Click to collapse
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
heartbrake said:
thanks..should i install 10.1 or 10.2 ? i am confused..which one has few bugs and do i need specific stock rom version or any stock rom would work..i have 4.1.2 ddulp8
Click to expand...
Click to collapse
try the latest version of cm10.1..
it's a bit better..
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
shut_down said:
http://forum.xda-developers.com/showthread.php?p=47566901&highlight=d-h+st#post47566901
This is link for latest. You will need to change some thing in build.prop to make red border dissapear. Some red border show up sometimes.
Solution: http://forum.xda-developers.com/showthread.php?p=48460020&highlight=red+border#post48460020
Click to expand...
Click to collapse
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..can u also paste the link for google apps latest version that is compatible with these roms..thanks again
heartbrake said:
thanks man..but it is written beta in 10.1 and in 10.2 team canjica it is written as stable..sorry for all these questions, i am new to this..
Click to expand...
Click to collapse
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
shut_down said:
Threads are not updated.
I use 10.1 for some time, I think it is fastest ROM we have. I am not sure if WIFI direct is working, but I am not using it anyway.
Click to expand...
Click to collapse
okay ..can u please post the google apps link..that is compatible with this rom..
heartbrake said:
okay ..can u please post the google apps link..that is compatible with this rom..
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23060877490000128
http://goo.im/gapps/gapps-jb-20130812-signed.zip
Both links are for same gapps. I posted in case if some do not work.
CM 10.2 is better than 10.1. Don't try Omni.
jihaad said:
CM 10.2 is better than 10.1. Don't try Omni.
Click to expand...
Click to collapse
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
heartbrake said:
thanks man..i am using cm 10.1 currently and no lag.. i love it..if u say so, i will try cm10.2 ..this is the link for the latest version right? http://goo.im/devs/diegoch/janice/cm-10.2/cm-10.2-20131025-UNOFFICIAL-janice.zip
Click to expand...
Click to collapse
No, it's old. Latest version: http://d-h.st/UVl
jihaad said:
No, it's old. Latest version: http://d-h.st/UVl
Click to expand...
Click to collapse
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
I installed 10.1
much better then Samsung 4.1.2
mannulko said:
I had ear phone problem with cm 10.1. On incoming calls earphn volume was very low nd I had to increase it every tym manually. Is it rectified in cm 10.2?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
This issue has already been fixed in latest cm10.1 and cm 10.2 if flashed over ddulp8 indian stock rom.
so which rom has the more fixes cm10.1 or 10.2?
Fixes like nfc/omx/RIL/wifi/blutooth

[Q] question about cm11

what is the most stable CM11 ROM for xperia z1? I'm on stock based custom ROM, i'm on ihacker 4.1 but I always wanted to try pure android ROM. I see quite a few pure ROM but there seems to be a similarity and I'm not sure which one to pick. and of course the process of installing is different from Stock based ROM, you have to install GAPPS and sometimes compatible kernels so if anyone know something or two about this please give any suggestion.
Thanks so much
thanwachai said:
what is the most stable CM11 ROM for xperia z1? I'm on stock based custom ROM, i'm on ihacker 4.1 but I always wanted to try pure android ROM. I see quite a few pure ROM but there seems to be a similarity and I'm not sure which one to pick. and of course the process of installing is different from Stock based ROM, you have to install GAPPS and sometimes compatible kernels so if anyone know something or two about this please give any suggestion.
Thanks so much
Click to expand...
Click to collapse
Official CM Downloads
https://download.cyanogenmod.org/?device=honami
For now still nightly build,not stable yet.
Thank you so much! I'll try that
Sent from my C6903 using XDA Premium 4 mobile app
thanwachai said:
Thank you so much! I'll try that
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
welcome & always hit thanks instead of saying
thanwachai said:
what is the most stable CM11 ROM for xperia z1? I'm on stock based custom ROM, i'm on ihacker 4.1 but I always wanted to try pure android ROM. I see quite a few pure ROM but there seems to be a similarity and I'm not sure which one to pick. and of course the process of installing is different from Stock based ROM, you have to install GAPPS and sometimes compatible kernels so if anyone know something or two about this please give any suggestion.
Thanks so much
Click to expand...
Click to collapse
I use Build 11 20140504 nightly - honami.
No bugs so far. WiFi and mobile data are working. Camera works too.
Sent from my C6903 using Tapatalk
I would say any rom that doesn't have the latest cwm 6.0.4.8. cwm 6.0.4.7 is the best no camera problems if you want a link just PM me and I'll upload it since cyanogenmod webpage doesn't have it anymore
yup owns Z1 and stuff. Also if I've helped you don't forget to hit THANKS - actions speak louder that words.
Please tell me what you base that on and please explain how recovery effects the camera...
gregbradley said:
Please tell me what you base that on and please explain how recovery effects the camera...
Click to expand...
Click to collapse
Ever since April release where cwm 6.0.4.8 was introduced camera has 50% chance of working I know there is a fix for it but after updating nightlies fix goes away and you have to reflash fix
Before latest cwm camera worked 100% of the time even though it had the usual freeze for about 5 seconds.
Ive tried formatting boot/system/data amd the problem persists. The only fix is to flash the zip file.
yup owns Z1 and stuff. Also if I've helped you don't forget to hit THANKS - actions speak louder that words.
Still don't see the link.
Please explain what in the older version of CMW effects the camera...
gregbradley said:
Still don't see the link.
Please explain what in the older version of CMW effects the camera...
Click to expand...
Click to collapse
I was talking about the version of cm11. On April they released new caf kernel cm11 which was cwm 6.0.4.8. Before that camera work well and only froze for 5 seconds
The kernel does not effect it I was talking about version of cm11 since I've lost track of the exact nightly.
Camera fix : http://forum.xda-developers.com/galaxy-s3/themes-apps/30-nov-fixed-camera-app-cm10-2-cm10-2-t2505973
yup owns Z1 and stuff. Also if I've helped you don't forget to hit THANKS - actions speak louder that words.

[Q] (CM11) Have anyone seen & and try these CM11 ROMS b4?

I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/
mudkipstar said:
I haven been here for a while please remove my thread if this is not apporiate or have been asked b4
I been following androidarmv6 on jenkins though and realized they have been updating kitkat roms
theres even a stable version dated 18 May 2014
I tried the lastest nightly as of 31 May 2014 video camera is not working yet
So these ROMs are built by armv6 team or?
http://jenkins.androidarmv6.org/view/All/job/cm-ota/
http://download.androidarmv6.org/_builds/cooper/
Click to expand...
Click to collapse
Yes, these roms are built by androidarmv6 team. Haven't personally tried the new one's, so can't say more about those roms. Hope I Helped
thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?
mudkipstar said:
thanks for the reply, theres recently a stable built released, is it really stable or? Can someone from armv6 answer this hahas?
Click to expand...
Click to collapse
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery
Viper The Ripper said:
Yes, there're here CM11 STABLE Releases
You'll need CWM 6.x recovery, a based CWM6 recovery or TWRP 2.7.0.0 recovery to flash those ROM correctly
Finally here you'll find CM11/OMNI/OMEGA roms, you can flash using a CWM 5.x based recovery
Click to expand...
Click to collapse
thx for the tip , what are the known bugs in CM11 for now?
I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269
skoda9635 said:
I think that those releases are also the same as in this topic: http://forum.xda-developers.com/showthread.php?t=2659269
Click to expand...
Click to collapse
Exactly. The author has only modified the update-script so that we can flash it from CWM 5 rather than from CWM 6
mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
AFAIK video recording and maybe fm radio
mudkipstar said:
thx for the tip , what are the known bugs in CM11 for now?
Click to expand...
Click to collapse
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)
s.tanbin said:
i try most of them even the new one..
thing is they r stables but full off bug
video doesn't work
fm same problem;
same time it lost sdcard req reboot..
very slow; and it have a problem with file explore. i didn't show any file same time..
work well without gapp (my experience)
Click to expand...
Click to collapse
I can manage without FM
But I must have video
I hope it will be soon...
ronca79 said:
I can manage without FM
But I must have video
I hope it will be soon...
Click to expand...
Click to collapse
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped
mahithm said:
Bro, try this fix by MM7. Here is the link,
[PATCH] Video recording fix for CM11
Do post the result. Hope I Helped
Click to expand...
Click to collapse
is it for any 4.4.x cm / omni / omega release ?
ronca79 said:
is it for any 4.4.x cm / omni / omega release ?
Click to expand...
Click to collapse
Yes.
mahithm said:
Yes.
Click to expand...
Click to collapse
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.
ronca79 said:
I'm searching this patch for few months.
The main problem is the development section and the original development section .... :crying:
Anyway... everything works great
You got already my 10x.
Click to expand...
Click to collapse
Glad I could help buddy

Categories

Resources