Database Develop

[Q] Insufficient space on device. Can't install any app

Hi fellow blackers,
My optimus black was on Nova Rom 2.2 v8:
http://forum.xda-developers.com/showthread.php?t=1161015
And I flashed it to v20n:
http://forum.xda-developers.com/showthread.php?t=1441901
I followed the instructions specifically these two before proceeding with the zip install.
1. Wipe Data/Cache (if not wiped, might cause problem)
2. Advanced > Wipe Dalvik Cache (same as data/cache, might cause problem)
After flashing, I can't seem to install any app from Market. It says that I have insufficient space on device.
So did some searching (google and here on XDA):
Here are their suggestions:
1. Install Marketfix - unfortunately, I can't install this because it is already saying I have insufficient space.
2. Clear market cache - after clearing (cache and data), I still says insufficient space
3. Uninstall market update - Going to settings - Application - manage application then selecting Market, I don't see any uninstall button. Just Force close, cancel and clear cache, clear data..
4. Finally I saw knzo's supposedly fix for this: Something to do with file system (nova is on EXT4 while stock is on EXT3)
http://forum.xda-developers.com/showthread.php?t=1212370&highlight=insufficient
I wasn't able to try option 1 because the file was removed on all file sharing sites.
Options 2 and 3 - restore factory settings isn't working. The phone is not doing anything after I click Erase everything. It just hangs
Any other suggestions?

Try reflash ROM with wipe all data and cache in CWM including dalvik cash and formating partitions in "mounts&storage".
Or this!

Try wipe cache and dalvik cache...worked for me

hmm pardon me, but how do I boot into recovery? I tried powering the device on while holding volume down (also tried up and G button) but it didnt reboot into recovery.

Artyomperec said:
Try reflash ROM with wipe all data and cache in CWM including dalvik cash and formating partitions in "mounts&storage".
Or this!
Click to expand...
Click to collapse
Since I can;t install anything (rom manager etc.), I think I needed to do what you advised.
I was able to flash the stock then started up from there

Since I can;t install anything (rom manager etc.), I think I needed to do what you advised.
I was able to flash the stock then started up from there
Click to expand...
Click to collapse
Have you tried flash this MOD for enter in recovery from power off phone pushing "G" button, not pressed and hold, but pushing every time when boot, work for me!

just try this
dsokua said:
Hi fellow blackers,
My optimus black was on Nova Rom 2.2 v8:
http://forum.xda-developers.com/showthread.php?t=1161015
And I flashed it to v20n:
http://forum.xda-developers.com/showthread.php?t=1441901
I followed the instructions specifically these two before proceeding with the zip install.
1. Wipe Data/Cache (if not wiped, might cause problem)
2. Advanced > Wipe Dalvik Cache (same as data/cache, might cause problem)
After flashing, I can't seem to install any app from Market. It says that I have insufficient space on device.
So did some searching (google and here on XDA):
Here are their suggestions:
1. Install Marketfix - unfortunately, I can't install this because it is already saying I have insufficient space.
2. Clear market cache - after clearing (cache and data), I still says insufficient space
3. Uninstall market update - Going to settings - Application - manage application then selecting Market, I don't see any uninstall button. Just Force close, cancel and clear cache, clear data..
4. Finally I saw knzo's supposedly fix for this: Something to do with file system (nova is on EXT4 while stock is on EXT3)
http://forum.xda-developers.com/showthread.php?t=1212370&highlight=insufficient
I wasn't able to try option 1 because the file was removed on all file sharing sites.
Options 2 and 3 - restore factory settings isn't working. The phone is not doing anything after I click Erase everything. It just hangs
Any other suggestions?
Click to expand...
Click to collapse
2 days ago I got this problem too, but SOLVED when I upgrade to CWM 5.0.2.6 (from CWM 4.0.1.5) then re-flashing with redy2006 V20N
what version CWM u have?
dsokua said:
hmm pardon me, but how do I boot into recovery? I tried powering the device on while holding volume down (also tried up and G button) but it didnt reboot into recovery.
Click to expand...
Click to collapse
just try adb reboot recovery from your PC to go to CWM

Just for be able to post new thread. Sorry.

kingtawon said:
2 days ago I got this problem too, but SOLVED when I upgrade to CWM 5.0.2.6 (from CWM 4.0.1.5) then re-flashing with redy2006 V20N
what version CWM u have?
just try adb reboot recovery from your PC to go to CWM
Click to expand...
Click to collapse
Ooh, I didn't update my CWM so I think it was on 4.x.x.x, Was able to flash and install apps in 5.0.2.6
Anyway, Im on temasek kangs build now

dsokua said:
Ooh, I didn't update my CWM so I think it was on 4.x.x.x, Was able to flash and install apps in 5.0.2.6
Anyway, Im on temasek kangs build now
Click to expand...
Click to collapse
so, still got same issue ?

[Q] CyanogenMod gets stuck at boot animation after update to 10.2

Hello
I have the problem that I cannot update my i9000 from CyanogenMod 10.1.3 to 10.2.0. After the update, Cyanogenmod doesn’t start anymore. It gets stuck at the boot animation: The blue CyanogenMod-mascot within the round rotating arrow. I waited 15min for it to start, then I left the phone for 2h and it still didn’t start.
I did the update as follows:
First, I tried to update with the automatic updater from CyanogenMod, but that didn’t work. It aborted and restarted CyanogenMod 10.1.3.
So I tried it manually with ClockworkMod (v6.0.3.6):
- wipe data / factory reset
- wipe cache partition
- advanced -> wipe dalvik cache
This message was shown: E:unknown volume for path [/sd-ext]
Dalvik cache wiped.
- install zip -> choose zip from sdcard -> cm-10.2.0-RC1-galaxysmtd.zip
It aborted and the following message was shown:
This ROM uses an incompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
- Did it again: install zip -> choose zip from sdcard -> cm-10.2.0-RC1-galaxysmtd.zip
Now the zip-file was installed completely.
- reboot system now
The result was that the phone got stuck at the boot animation.
Remarks:
- I didn’t do a backup of apps and data, because I didn’t have important data on the phone.
- I didn’t have root-rights in CM 10.1.3.
I tried it again with the stable version of CM 10.2.0. I didn’t have to install the zip twice anymore, but the phone still gets stuck at the boot animation. Wiping cache and dalvik cache again didn’t make it start.
I can still boot into ClockworkMod and it was also possible to go back to CM 10.1.3. Just CM 10.2 doesn’t start up.
What do I have to do to make CM 10.2 start up?
Thank you very much for your help.
Best regards
Tomy

@Tomy_Delmar
Tomy, CyanogenMod is already custom ROM, there is always root access on it
Try it this way:
download Gapps for CM10.2x (Android 4.3.x) and paste them on your external SD card
put the card in your phone
run it in recovery mode
wipe cache and dalvik cache
flash Gapps for 4.3
wipe again cache and dalvik cache.
reboot
Post if it worked.

Tomy_Delmar said:
Hello
I have the problem that I cannot update my i9000 from CyanogenMod 10.1.3 to 10.2.0. After the update, Cyanogenmod doesn’t start anymore. It gets stuck at the boot animation: The blue CyanogenMod-mascot within the round rotating arrow. I waited 15min for it to start, then I left the phone for 2h and it still didn’t start.
I did the update as follows:
First, I tried to update with the automatic updater from CyanogenMod, but that didn’t work. It aborted and restarted CyanogenMod 10.1.3.
So I tried it manually with ClockworkMod (v6.0.3.6):
- wipe data / factory reset
- wipe cache partition
- advanced -> wipe dalvik cache
This message was shown: E:unknown volume for path [/sd-ext]
Dalvik cache wiped.
- install zip -> choose zip from sdcard -> cm-10.2.0-RC1-galaxysmtd.zip
It aborted and the following message was shown:
This ROM uses an incompatible partition layout
Your /data will be wiped upon installation
Run this update.zip again to confirm install
- Did it again: install zip -> choose zip from sdcard -> cm-10.2.0-RC1-galaxysmtd.zip
Now the zip-file was installed completely.
- reboot system now
The result was that the phone got stuck at the boot animation.
Remarks:
- I didn’t do a backup of apps and data, because I didn’t have important data on the phone.
- I didn’t have root-rights in CM 10.1.3.
I tried it again with the stable version of CM 10.2.0. I didn’t have to install the zip twice anymore, but the phone still gets stuck at the boot animation. Wiping cache and dalvik cache again didn’t make it start.
I can still boot into ClockworkMod and it was also possible to go back to CM 10.1.3. Just CM 10.2 doesn’t start up.
What do I have to do to make CM 10.2 start up?
Thank you very much for your help.
Best regards
Tomy
Click to expand...
Click to collapse
As the partition layout is different in cm10.2, you should flash it at least 2 times and wait for system to be stable for about 15-20 minutes

Tetakpatak and Rohitdahiya, thanks for the reply and advice!
In my previous post, I forgot to mention that I installed CyanogenMod without the Gapps. I’d like to try if an android-phone without the Gapps is still useful. Somehow I don’t like the data-collecting-mania of Google.
I tried again the update from CM 10.1.3 to 10.2:
- I downloaded cm-10.2.0-galaxysmtd.zip again and copied it to the internal SD-card of the phone.
- Restarted the phone into ClockworkMod recovery.
- wipe data / factory reset
- wipe cache partition
- wipe dalvik cache
- install zip -> choose zip from sdcard -> cm-10.2.0-galaxysmtd.zip
- install zip -> choose zip from sdcard -> cm-10.2.0-galaxysmtd.zip
(Did it twice. Don’t know if necessary.)
Didn’t install Gapps.
- wipe cache partition
- wipe dalvik cache
- reboot system now
Unfortunately CM still gets stuck at the boot animation. The arrow has been rotating for over an hour now.
To my knowledge the Gapps are not mandatorily required to install CM. I could install CM 10.1.3 without the Gapps without any problems.
Could a full-wipe solve my problem?
ClockworkMod -> mounts and storage -> format /system …?
I have never done this before.
Or is there something else I can do?
Regards
Tomy

Tomy_Delmar said:
Tetakpatak and Rohitdahiya, thanks for the reply and advice!
In my previous post, I forgot to mention that I installed CyanogenMod without the Gapps. I’d like to try if an android-phone without the Gapps is still useful. Somehow I don’t like the data-collecting-mania of Google.
I tried again the update from CM 10.1.3 to 10.2:
- I downloaded cm-10.2.0-galaxysmtd.zip again and copied it to the internal SD-card of the phone.
- Restarted the phone into ClockworkMod recovery.
- wipe data / factory reset
- wipe cache partition
- wipe dalvik cache
- install zip -> choose zip from sdcard -> cm-10.2.0-galaxysmtd.zip
- install zip -> choose zip from sdcard -> cm-10.2.0-galaxysmtd.zip
(Did it twice. Don’t know if necessary.)
Didn’t install Gapps.
- wipe cache partition
- wipe dalvik cache
- reboot system now
Unfortunately CM still gets stuck at the boot animation. The arrow has been rotating for over an hour now.
To my knowledge the Gapps are not mandatorily required to install CM. I could install CM 10.1.3 without the Gapps without any problems.
Could a full-wipe solve my problem?
ClockworkMod -> mounts and storage -> format /system …?
I have never done this before.
Or is there something else I can do?
Regards
Tomy
Click to expand...
Click to collapse
First of all, don't forget to quote the user whom you want to contact, because he don't get any notification until you quote. I was just checking around the questions and thus I saw this.
Sometimes, there is requirement of g-apps for the core system to be working ( Not sure in case of cm10.2). Try with g-apps (you may choose light package).
In my opinion, it should work. If not, try from the start ( flashing gingerbread with Odin with repartition ticked, then its root and finally cm10.2 from recovery)
Also make sure your handset is i9000 and you are using cm10.2 for the same.
And finally, All the best

CM doesn't neccesarily need Gapps to boot up. In fact most custom roms don't - they are still usable, just that everything Google-related doesn't work.
Its a bit odd seeing as how you've pretty much done what I would have done if I was installing CM to a Galaxy S. I can't think of any reason why it wouldn't work.
As far as I know as well, formatting /system is more of a last-resort method, not something you'd immediately do.
However, I had a similar problem installing a rom onto my tablet - different device, I know, but try this anyway and see if you get anywhere:
1.) Go back into recovery if its still bootlooping
2.) Wipe data, cache, Dalvik (and this is after you've flashed the CM10.2 zip twice like you did)
3.) Reboot device without flashing Gapps - this is to see if it boots up.
Let us know what happens.
Sent from my GT-P7510 using Tapatalk

Tomy_Delmar said:
In my previous post, I forgot to mention that I installed CyanogenMod without the Gapps. I’d like to try if an android-phone without the Gapps is still useful. Somehow I don’t like the data-collecting-mania of Google.
Click to expand...
Click to collapse
Tomy, now it is getting clear- of course, I tought you already had Gapps on your CM10.1.3 installed so in such case they would definitely need to be updated to 4.3
Yes, the ROM shouold work perfectly fine also without Gapps
Your workflow sounds correct, but just to make sure: after first attempt to flash CM10.2 build, there should be a warning that all your data will be wiped, right? After that you must again choose the option "install zip" and install CM10.2. It will work this time.
If it doesn't work, download again the CM10.2 zip as it may be corrupted file. BTW, I didn't like that build for several reasons and returned to RC version.
If nothing helps, flash back your CM10.1.3 and restore your nandroid backup if important files were there. If the downgrade won't work for different partition of the /system, use my unbricking guide and revert to stock, then to CM10.1.3, then to CM10.2.
Keep step by step on the guide if you use it, it has important points to control before flashing. Flashing with re-partition needs always a PIT file, or with other words: without that file re-partition option mustn't be checked. Doing it simply by clicking the re-partition (like @Rohitdahiya adviced you to) without a PIT file checked under "PIT" would brick your i9000.

Soryuu said:
However, I had a similar problem installing a rom onto my tablet - different device, I know, but try this anyway and see if you get anywhere:
1.) Go back into recovery if its still bootlooping
2.) Wipe data, cache, Dalvik (and this is after you've flashed the CM10.2 zip twice like you did)
3.) Reboot device without flashing Gapps - this is to see if it boots up.
Let us know what happens.
Click to expand...
Click to collapse
Unfortunately, Wiping data, cache and Dalvik cache again after I had flashed CM 10.2 didn’t make it start.

tetakpatak said:
Tomy, now it is getting clear- of course, I tought you already had Gapps on your CM10.1.3 installed so in such case they would definitely need to be updated to 4.3
Yes, the ROM shouold work perfectly fine also without Gapps
Your workflow sounds correct, but just to make sure: after first attempt to flash CM10.2 build, there should be a warning that all your data will be wiped, right? After that you must again choose the option "install zip" and install CM10.2. It will work this time.
If it doesn't work, download again the CM10.2 zip as it may be corrupted file. BTW, I didn't like that build for several reasons and returned to RC version.
If nothing helps, flash back your CM10.1.3 and restore your nandroid backup if important files were there. If the downgrade won't work for different partition of the /system, use my unbricking guide and revert to stock, then to CM10.1.3, then to CM10.2.
Keep step by step on the guide if you use it, it has important points to control before flashing. Flashing with re-partition needs always a PIT file, or with other words: without that file re-partition option mustn't be checked. Doing it simply by clicking the re-partition (like @Rohitdahiya adviced you to) without a PIT file checked under "PIT" would brick your i9000.
Click to expand...
Click to collapse
When I tried to flash CM 10.2 the first time – at that time RC1 was the newest version – I was asked to flash it a second time, which I did. To be precise, the following message was shown:
This ROM uses an incompatible partition layout
You /data will be wiped upon installation
Run this update.zip again to confirm install
This message hasn’t been shown again since then. I flashed CM 10.1.3 again and tried to flash 10.2 a second time, but the message wasn’t shown again.
Going back to CM 10.1.3 worked without any problem.
------------------------------------------
Now I have CM 10.2 on my phone and it starts normally
I flashed Stock-Android 2.3.6 with Odin (v1.82). Tetakpatak, thank you for the excellent guide and the video! As written in the guide, I used "s1_odin_20100512.pit" as PIT-file.
(I executed Odin on an old computer with Windows XP 32bit, as the guide says Odin 1.82 works better with Win XP.)
Then I installed CM 10.2 over Stock-Android 2.3.6. I followed the official instructions:
http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd?setlang=en
(I executed Heimdall on my new computer with Windows 7. Heimdall 1.4RC2 doesn’t work on Win XP. If one executes Odin and Heimdall on the same PC, I could imagine this could lead to confusion, because Odin needs the Samsung-USB-drivers and Heimdall needs WinUSB. I’m not sure if this really leads to problems. But one should keep that in mind.)
I didn’t flash CM 10.1.3 before 10.2, because I didn’t need to restore a nandroid backup previously made with CM 10.1.3. There were no important data on the phone.
Many thanks to all who gave me advice and helped my solving the problem!
Tomy

HELP MEEE
I put on TWRP 2.6.3.0 on my Nexus 5 (I used towerlroot succesfully) and i tried wiping as you should, i noticed i loaded an old twrp so i quickly powerd off my Nexus5. When i loaded, every app had a "Google play services has stopped" error and some would force close. I reloaded TWRP and tried to flash cyanogenmod and gapps, succelfully they installed. Now cyanogenmod is stuck in the boot animation and i dont know to update TWRP, HELPP PLEASSE!!!!

Pure_Android said:
I put on TWRP 2.6.3.0 on my Nexus 5 (I used towerlroot succesfully) and i tried wiping as you should, i noticed i loaded an old twrp so i quickly powerd off my Nexus5. When i loaded, every app had a "Google play services has stopped" error and some would force close. I reloaded TWRP and tried to flash cyanogenmod and gapps, succelfully they installed. Now cyanogenmod is stuck in the boot animation and i dont know to update TWRP, HELPP PLEASSE!!!!
Click to expand...
Click to collapse
This is the forum for the original Galaxy S, not the Nexus 5, sorry mate
However I think your problem can be fixed by doing a full data/cache wipe so it might be worth a shot

Flash Boot.Img. This might solve the bootloop!
I think, You just need to flash the boot.img (available in the Cynogen Bundle Zip Folder) after installing Cynogen Mod. Me too got stuck on the animation part for a long time. Then I found out this:
CyanogenMod builds for endeavoru currently do NOT support any bootloader version number below: HBOOT 1.28. As the device is S-ON (security-on bootloader), for a working installation you must extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode.
Source: Cynogen Mod Wiki

Pure_Android said:
I put on TWRP 2.6.3.0 on my Nexus 5 (I used towerlroot succesfully) and i tried wiping as you should, i noticed i loaded an old twrp so i quickly powerd off my Nexus5. When i loaded, every app had a "Google play services has stopped" error and some would force close. I reloaded TWRP and tried to flash cyanogenmod and gapps, succelfully they installed. Now cyanogenmod is stuck in the boot animation and i dont know to update TWRP, HELPP PLEASSE!!!!
Click to expand...
Click to collapse
Which version of CyanogenMod are you using?

[Q] What's NOT getting wiped when I flash?

I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?

jran0880 said:
I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?
Click to expand...
Click to collapse
Sounds like /data isn't getting wiped or formatted.

jran0880 said:
I have successfully flashed @shinobisoft's latest CM11 build and it runs fine. However, I wanted to do a "clean" install. I used philz recovery to install the new ROM. Prior to install, i used the clean up for new ROM install option and let it run through. To be sure everyhthing was "clean", I also wiped dalvik, cache, and even user media. I also formatted everything EXCEPT external SD, as that is where the .zips are located for install.
I installed ROM and gapps "modular" as well a chrome add-on, and rebooted phone.
When ROM loaded, I was greeted by the "choose language" screen, which is what i expected to see. I let it "settle" (Galaxy S2 experience) for about 15 minutes or so before I touched anything. When I went to complete setup, my wifi was already connected and the phone was linked to my account. It was using Apex launcher and the settings I used prior to updating.
What am I NOT wiping/formatting prior to installation?
Click to expand...
Click to collapse
One other thing... Have you set up Google to track your installed apps/etc? If so, Google will automatically restore them.

Failbringer60 said:
I did a full wipe for the initial install. But for the newest build i wiped system only and flashed on top of the previous build. I can do a full wipe again and reinstall the newest build to see if it corrects my issues. But i can assure you i wiped everything when i installed the previous build.
Click to expand...
Click to collapse
shinobisoft said:
Umm... I'm seen a bunch of references in your posted log that refer to the old sdcard path ( as in stock, /storage/external_SD. New path is : /storage/sdcard1 ). This is telling me that you did NOT format your /system and or /data partition when you installed CM for the first time. Obviously the only way to remedy this is to do a fresh installation following the instructions I posted in the OP.
Click to expand...
Click to collapse
shinobisoft said:
One other thing... Have you set up Google to track your installed apps/etc? If so, Google will automatically restore them.
Click to expand...
Click to collapse
I changed the "auto restore" setting so it won't automatically install my apps and tried another "clean" install with the same results. It's almost like I'm restoring from a previous back up! I made sure to wipe and format everything twice just to be certain. Installed only CM and gapps zips, wiping dalvik and cache before booting system. My result was the same as previous..... Choose language.... WiFi connects, and my settings restore.... I am NEVER asked to login to my Google or Cyanogen account(s)......
I'm about to back up and wipe everything, use fastboot to format the partitions? Ideas? Thoughts? Suggestions?
Perhaps restore my "rooted factory ROM" from TWRP back up and start from there? Or restore from .kdz?

Maybe try a factory reset from Settings after installing? Kind of a long shot but that's what I had to do after flashing back to stock when nothing seemed to have changed ...

How to go from OOS 5.0 to Stock Nouga

How to go from OOS 5.0 to Stock Nouga

Since you've made the spelling error twice, its Nougat, not "Nouga.".
I think the best way you could do it is flash the special Open Beta build on the Open Beta thread and then flash the stable build zip.
Whichever way you do the reversion, you will lose partial data, as N and O do not support each others app installations.

Z.boy said:
How to go from OOS 5.0 to Stock Nougat
Click to expand...
Click to collapse
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you

izukamikain said:
If you are unlocked bootloader, flash twrp 3.1.1-2 and clear dalvik data cache and system, and just flash them through twrp
dont use twrp 3.2.0-0 because you cant install magisk, it shows installed but magisk doesnt seem to be recognized in apps
I've just done that, and everything seems working flawlessly
Pls do hit thanks if i help you
Click to expand...
Click to collapse
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.

rebelpixel said:
Does your solution avoid erasing internal storage? Because that's the part that's preventing me as it can take too long getting my backups into the phone again.
Click to expand...
Click to collapse
i never format my internal sdcard partition
it's taking too long time to backup and restore it again
as i said, only format dalvik cache data and system thru twrp and you're good to go

download special edition nougat revert zip file and flash it via recovery
http://oneplusroms.s3.amazonaws.com...337224&Signature=BEA4IHd/rVFqoPd2gh7EvwaoSeg=
notes :
The build will wipe app and cache data, but Internal Storage will be saved (ie: pictures and files)
Users who revert their device back to the special build can still OTA update the device to Android O build at a later date.
Steps to revert:
Download special build
Copy to Internal storage
Reboot to recovery Mode to install
Choose “Install from Local”
Choose the downloaded build to install

Steps to do clean flash

1.Reboot to recovery
2.Wipe>advance wipe> select
a.dalvik cache
b.System
c.Vendor
d.Data
e.Cache
And swipe
3.Install>select ROM.zip
If rom does not have gapps then:-
Tap add more zip
Select gapps(Pico/Nano)
Install
6.Wipe dalvik cache and cache
7.Reboot system
ENJOY!
*NOTES*
1.Formatting data is not necessary everytime but if you face any problem like after rebooting you were asked for password then do a format data and reboot.
2.You can use latest TWRP but if facing problem then you can use the recommended TWRP released on 22/04/2020.
3.If you still facing any issue then you can ask freely by replying this post.
IF YOU LIKE MY WORK THEN HIT THANKS

ishu88 said:
1.Reboot to recovery
2.Wipe>advance wipe> select
a.dalvik cache
b.System
c.Vendor
d.Data
e.Cache
And swipe
3.Install>select ROM.zip
If rom does not have gapps then:-
Tap add more zip
Select gapps(Pico/Nano)
Install
6.Wipe dalvik cache and cache
7.Reboot system
ENJOY!
*NOTES*
1.Formatting data is not necessary everytime but if you face any problem like after rebooting you were asked for password then do a format data and reboot.
2.You can use latest TWRP but if facing problem then you can use the recommended TWRP released on 22/04/2020.
IF YOU LIKE MY WORK THEN HIT THANKS
Click to expand...
Click to collapse
Peru asfk

Ouff thanks sar.
Quite helpful. Booted successfully to PE. Now going back to Stock because I didn't like it?

beonbuster said:
Ouff thanks sar.
Quite helpful. Booted successfully to PE. Now going back to Stock because I didn't like it
Click to expand...
Click to collapse
Mention not just keep exploring things

raza231198 said:
Peru asfk
Click to expand...
Click to collapse
Thanks sir but you are pro meh noob

i am not able to find system or vendor options. but there's a metadata option. dalvik, cache and data is available. please help, my phone is not rooted