Database Develop

[Q] Make an image from a rom

Hello all,
I'm wondering if there's any way of make an image from my phone, with all the softwares and data already installed and configured (just like Macrium Reflect do on Windows). Just like a backup, so if I have any kind of problem, I just have to flash my .zip into the phone again.
Thanks in advance.

Have you tried ClockworkModRecovery?

Fruit cake maker is a better solution for your question. Plus if you name the .zip it creates pg58img.zip and place it on your SD card root. Then you don't even need cwm.
Sent from my HTC Sensation using xda premium

HerrKuk said:
Have you tried ClockworkModRecovery?
Click to expand...
Click to collapse
I have it installed, but I don't know how t use it to create a img. Is there any link where can I read about it?
nate_sheedy said:
Fruit cake maker is a better solution for your question. Plus if you name the .zip it creates pg58img.zip and place it on your SD card root. Then you don't even need cwm.
Click to expand...
Click to collapse
I'm installing to test it right now, how can I recover it later without CWM?

3in said:
I have it installed, but I don't know how t use it to create a img. Is there any link where can I read about it?
Click to expand...
Click to collapse
just make a backup through CWM menu, it will backup EVERYTHING on your phone and save to clockworkmod/backup/..... in your sdcard. The backup included few .tar files instead of a single .zip, but the result is the same --- you can restore it (overwrite everything) to your phone at anytime.

3in said:
I have it installed, but I don't know how t use it to create a img. Is there any link where can I read about it?
I'm installing to test it right now, how can I recover it later without CWM?
Click to expand...
Click to collapse
When you backup with the recovery menu(power+volume button simultaneously pressed until u see the android picture), you will find this backup files either in the EXT SD card or the Internal SD depending the CWM version, in the clockworkmod/backup. All you have to do is to get into recovery mode and restore.....it works perfectly

It worked!
That was just what I needed!
Many thanks for your help guys....

[MOD] AIO Boot Mod Made By Me For All Motorola Razr i

AIO Boot Mod Made By Me For All Motorola Razr i
info with this boot youll get:-
Swap sdcard
Root at boot
init.d support
Hacked adb get it by typing adb root
Enable Mass Storage
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
here's v2 with this you get
Fixed dpi
Mass storage by default you can now change it in build.prop
IO file explorer
Speed improved mods in default.prop
12 hour clock
Busybox installed to system/xbin
Install non market apps set to 1
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
here's v3 with this you get
Flash Player
Install to sdcard enbled in settings
Fixed the app problem were some apps will not install
Downloads
download 81.5.39001.Retail.en.GB.zip boot mod here
download 81.5.40002_EU.zip boot mod here
download ROM AMBP boot mod here
Download boot mod for 871.110.12012..Brasil.en.BR here
New Mods For Jelly Bean
Swapped sdcard "external is now mean sdcard"
Unlinked data/media "Full 6gb for data"
Flash player "only works in stock browser"
Installs busybox
Auto Rooter
Enabled 3g in Settings
Download v1 jelly bean
Orange UK JB Only
here
Retail.en.EU jelly bean only
here
Tomorrow I'll do the French jb ROM
Extra Info
I ADVICE YOU WITH V3 TO FACTORY RESET AS THIS WILL ENABLE ALL MOD EG
3G , Fixed dpi & Mass storage by default
How To Is Very Easy
Connect to pc and move the right zip for you make of motorola razr to your sdcard.
Reboot your motorola into recovery and flash.
Reboot.
Done.
DON'T FORGET TO HIT THE THANKS BUTTON

Thks, but not working for me (81.5.40002 EU).
Mass storage, MTP and PTP don't work at all and cause an error message "Processus storage stop".
And to finish the DPI change

is anyone else have problems with 81.5.40002 EU?
remember this eu version is for odex roms not deodex roms
if someone can uploaded the deodex settings.apk I can make for deodex and odex roms
you will need to add this line to build.prop
ro.sf.lcd_density=240
to fix dpi

Ok thks for the density!
But can you help me for the storage because I can't access to my internal and ext sdcard with my laptop .
I change the boot.img and the setting apk in your zip with root explorer and flash it again in CWM but nothing change..
Always "android.process.media" stop

PELLET Nolwenn said:
Ok thks for the density!
But can you help me for the storage because I can't access to my internal and ext sdcard with my laptop .
I change the boot.img and the setting apk in your zip with root explorer and flash it again in CWM but nothing change..
Always "android.process.media" stop
Click to expand...
Click to collapse
did you not backup your rom first
with root explorer do you see your sdcard at /sdcard

iv just tested the zip and it is working do you have both apk and odex in system/app

yes of course I I backup my rom
I see my sdcard yes, but when I connect my phone to the laptop I get the processus error message.
I'm odex, have you always my setting apk 81.5.40002 odex?

could you return to your backup and uploaded me both your settings.odex and settings.apk and I'll try to deodex it

That's great. thanks for share.

Here's my setting odex and apk files in zip.
View attachment 1563028

uploading eu zip with full settings apk im uploading now iv tested it and it is working fine now
edit:
now ready

rickwyatt said:
uploading eu zip with full settings apk im uploading now iv tested it and it is working fine now
edit:
now ready
Click to expand...
Click to collapse
Thanks for the boot... the SD swap works wonders but... is there a particular reason of why while windows detects a new usb storage unit... this appears as disabled?
Edit: Also if I try to go into settings -> storage android displays "settings has stopped"
I use this room:
http://www.droidrzr.com/index.php/topic/5465-rom-ambp-android-motorola-blur-project-release-2/
Attached is my settings apk... thanks in advance

im uploading ROM AMBP boot mod now
edit
now ready

rickwyatt said:
im uploading ROM AMBP boot mod now
edit
now ready
Click to expand...
Click to collapse
It still shows a grayed unit on my pc and cannot access the files, also if I go to storage in settings it force closes
Edit: I actually would be happy only with the sd swap option, tried the one in the other post but that force closes a lot of applications once applied, but the one contained in this version works wonders....

+¹ but thanks for looking after all the popular roms

We have the same problem with the razr M, do you think this can work if we flash it on that phone?
Thx
Sent from my XT907 using xda app-developers app

new update coming for uk motorola with this update you get
fixed dpi
mass storage by default you can now change it in build.prop
io file explorer
speed improved mods in default.prop
12 hour clock
busybox installed to system/xbin
install_non_market_apps set to 1
eu rom will come soon

arceles said:
It still shows a grayed unit on my pc and cannot access the files, also if I go to storage in settings it force closes
Edit: I actually would be happy only with the sd swap option, tried the one in the other post but that force closes a lot of applications once applied, but the one contained in this version works wonders....
Click to expand...
Click to collapse
I no why but I'll need your framework-res.apk to fix it

rickwyatt said:
I no why but I'll need your framework-res.apk to fix it
Click to expand...
Click to collapse
Here it is, and thank you for your hard work... (it still would be great if you got a separated version of exactly this mod that only swaps the sd card since that one always work for me but not the usb mount....)
Regards,

Updates are all ready

(Updated 3/sept)*****solved!***** CAMERA SAVE TO SD CARD WITH GOOGLE EDITION ROMS!!!!

Updated XposedInstaller 3/sept
As you all want to save your photos/videos to your external card (like I wanted), I give you my solution for this problem.
The solution is based on these two threads:
- Pictures2SD: http://forum.xda-developers.com/showthread.php?t=2408880
- XposedFramework: http://forum.xda-developers.com/showthread.php?t=1574401
Thanks to davisNT and rovo89
After some research here is my short method to make your Google Edition saving photos/videos to external card:
1. I attached two files, you have to download them to your phone
2. Install de.robv.android.xposed.installer_v18_e88d8b.apk
3. Launch the Xposed Installer, give it root, and click on "Install/Update"
4. Reboot your phone
5. Install Pictures2SD_102.apk
6. Launch Xposed Installer, go to the modules page and select the checkbox for Picture2SD
7. Reboot and it's done
I hope I don't forget anything, and I'm sure you can do it yourself if I missed something.

Tuningszocske said:
As you all want to save your pictures/videos to your external card (like I wanted), I give you my solution for this problem.
After some research here is my short method to make your Google Edition saving photos/videos to external card:
1. I attached two files, you have to download them to your phone
2. Install XposedInstaller.apk
3. Launch the Xposed Installer, give it root, and click on "Install/Update"
4. Reboot your phone
5. Install Pictures2SD_102.apk
6. Launch Xposed Installer, go to the modules page and check Picture2SD
7. It's done
I hope I don't forget anything, and I'm sure you can do it yourself if I missed something.
Click to expand...
Click to collapse
I get the following when trying to open "Modules" cannot read/data/xposed/modules.whitelist
Get the same error when installing Pictures2SD

Did you installed Xposed properly inside the installer? (the big button at the center with long text...)

Tuningszocske said:
Did you installed Xposed properly inside the installer? (the big button at the center with long text...)
Click to expand...
Click to collapse
Not sure why, but my phone will not boot after the install. I installed per directions and did use the large button. I rebooted and it is now not getting past the Google screen. I will wipe phone and try again. Anybody else tried this out yet?
I am sure I did something wrong, not sure what it is.
Wait a minute, it finally rebooted after 5 tries. I will see what happens now.
Nope, still has same error and will not load P2SD

Thanks for sharing. However this is not your work, so I think in your OP you should give credit to the people that created Pictures2SD and Xposed Framework.
- Pictures2SD: http://forum.xda-developers.com/showthread.php?t=2408880
- XposedFramework: http://forum.xda-developers.com/showthread.php?t=1574401

muoino said:
Thanks for sharing. However this is not your work, so I think in your OP you should give credit to the people that created Pictures2SD and Xposed Framework.
- Pictures2SD: http://forum.xda-developers.com/showthread.php?t=2408880
- XposedFramework: http://forum.xda-developers.com/showthread.php?t=1574401
Click to expand...
Click to collapse
I didn't say it is my work. I created this thread with my own words without copying anything, because a lot of people wrote in Galaxy S4 sections that Google Edition ROMs haven't got this function and cannot be solved. I also needed this, and made a research, and it was not fast. And because those threads you mentioned are far from the Galaxy S4 sections, and not completely understandable seperately for almost everybody, I finalized and simplified here as the real solution. Cheers!

wilbarger said:
Not sure why, but my phone will not boot after the install. I installed per directions and did use the large button. I rebooted and it is now not getting past the Google screen. I will wipe phone and try again. Anybody else tried this out yet?
I am sure I did something wrong, not sure what it is.
Wait a minute, it finally rebooted after 5 tries. I will see what happens now.
Nope, still has same error and will not load P2SD
Click to expand...
Click to collapse
Did you select the checkbox of the P2SD on the module page?

Tuningszocske said:
I didn't say it is my work. I created this thread with my own words without copying anything, because a lot of people wrote in Galaxy S4 sections that Google Edition ROMs haven't got this function and cannot be solved. I also needed this, and made a research, and it was not fast. And because those threads you mentioned are far from the Galaxy S4 sections, and not completely understandable seperately for almost everybody, I finalized and simplified here as the real solution. Cheers!
Click to expand...
Click to collapse
Your still going to have to credit the work your posting that someone else created and developed. Please update your OP.
You need to credit davisNT and rovo89 they Developed the work your linking.
We appreciate your efforts in finding a way to get pics to SD.
Thank you
Sent from my GT-I9505G using Tapatalk 2

Tuningszocske said:
Did you select the checkbox of the P2SD on the module page?
Click to expand...
Click to collapse
I still get the error when selecting the module page. I did a total reinstall and get the same error.

Which ROM you use?

Thank you for updating OP!
Sent from my GT-I9505G using Tapatalk 2

Tuningszocske said:
Which ROM you use?
Click to expand...
Click to collapse
CM10.2 latest nightly.

Uninstall the XposeInstaller I attached first. Try the updated installer (de.robv.android.xposed.installer_v18_e88d8b.apk) from the first post!

Tuningszocske said:
Uninstall the XposeInstaller I attached first. Try the updated installer (de.robv.android.xposed.installer_v18_e88d8b.apk) from the first post!
Click to expand...
Click to collapse
I just edited the system folder to add media r/w permissions and it works that way. Thanks for taking the time to work on this. It is easier than editing the system folder (and probably safer), but I have done the edit and will just use it that way.

everything went smooth
open up camera app and its asking me to install an SD card into phone before using camera.... i have a 64Gb card...
formatted SD card as well.. still no change

Anyone solved this challenge for CM10.2?
Would love to use CM10.2 for a while but the lack of pic to SD makes that a bigger pain than it should be.

thepktrckt said:
Anyone solved this challenge for CM10.2?
Would love to use CM10.2 for a while but the lack of pic to SD makes that a bigger pain than it should be.
Click to expand...
Click to collapse
Send me a PM and I will give you a link. Don't want to hijack this thread. The OP has worked hard on this and I respect what he has done.

WhiteSRT69 said:
everything went smooth
open up camera app and its asking me to install an SD card into phone before using camera.... i have a 64Gb card...
formatted SD card as well.. still no change
Click to expand...
Click to collapse
Try to reformat the card...

Tuningszocske said:
Try to reformat the card...
Click to expand...
Click to collapse
already did that as stayed in my original post. no go

Try format ext4 with computer, if doesn't work, try to format with the phone!

[TUTORIAL] Manually port T-Mobile Alliance ROM 5.0.1 to Verizon Dev Edition (12/8/15)

** Got Verizon Note 4 Dev Edition to work with Alliance T-Mobile ROM!! Data, calling, sms, mms work ! I smell a daily driver! I am not a developer, but this manual port taught me a lot. This was a personal project of trial and error, and research that turned into a stable ROM. Thought I'd share how I did it. I do not take credit for this ROM or kernel**
DISCLAIMER: Your warranty is now void. Please be careful make a nandroid of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device! Read this whole OP!
**This is using the BETA version of Alliance ROM for T-Mobile Note 4. Download the Alliance BETA and read the thread: http://forum.xda-developers.com/not...-0-1-allianceromn910t-18-themes-huge-t3085560 to get an idea of the features of this ROM. Give lacoursiere18 and hsbadr a thanks and donate to them for making this great ROM and kernel.
Follow these steps one after the other and don't stop**
1. Make sure you are on a OAF Lollipop ROM without xposed installed. I think I used Rick's OAF Lollipop ROM originally. Download the most recent multisystem kernel. I am on BOG modem so I'm pretty sure any Lollipop modem will work with this.
2. On your Verizon Lollipop ROM make copies on your SD card of:
- system/buildprop.xml & cscversion.txt
- system/etc/apns-config.xml
- system/etc/permissions/verizon_net_sip_library.xml & vzwapnlib.xml
- system/lib/libril.so & libsec-ril.so
- system/apps/VzwActivationAgent, vzwapnpermission & **SecSetupWizard2013**
- system/framework/VZWAPNLib.apk
- system/privapp/VZWAPNService & secmms_candy folders
- system/csc folder
4. Reboot into recovery and make a TWRP backup of everything except SD card.
5. While in recovery dirty flash Alliance ROM BETA on top of your lollipop ROM OAF (Wipe everything EXCEPT data, internal storage, and SD). Then flash the most recent multisystem kernel.
6. Once booted up and apps are optimized wait until the screen turns off by itself. Download root browser and delete system/privapp/diagmonagent.apk and system/lib/libdiagmonagent.so because at startup it was sending some kind of diagnostics and thought it was messing with the data drop. Ever since these changes and a reboot data has been stable!
Reboot
7. Using root browser, swap those copied files in the appropriate file location. Change them to the correct permissions (the folders get 0755 and the files 0644, compare with other files and folders that are in place already. Make sure you change the permissions on all folders copied over and their contents. If a permission is incorrect or you leave a file out there can be issues and a restore might be needed.). Let apps optimize. **Longest Step**
Reboot
8. Edit feature.xml in the system/csc folder and add:
<CscFeature_RIL_ForceConnectMMS>true
</CscFeature_RIL_ForceConnectMMS>
Above the two bottom tags:
</FeatureSet>
</SamsungMobileFeature>
This enables auto download mms when data is toggled off !
Reboot
9. Perform a factory reset within the settings. Let phone relax for like 10 mins after it boots. Go through the setup wizard and then reboot.
Reboot into recovery
10. Make an backup in TWRP and you have your own custom ROM
I'm pretty sure this ROM is not compatible with xposed but it is very customizable, smooth, and it comes with a lot of features built in.
**READ ME**
Bugs:
- Silent mode is only available using the toggle. Volume down only goes to vibrate.
**
- Battery section in settings is missing
- No way to remove battery percentage in status bar
(Workaround: Download "Battery Usage Shortcut" from the Playstore to access the battery section and to remove battery percentage)
**
- No way to uninstall 3mint battery mod without messing the systemui up **(see update at the bottom)**
- Now that the mobile network settings are correct the advanced calling option is avaliable but it force closes and messes up your data connection. A reflash of everything will be needed so don't click on it! (I have a feeling a Verizon app is missing)
- My volume titles are not correct (Ringtone, media, notifications, and system.) when I press the volume buttons. (**Workaround download Noyze Volume Panel for free from the developer
http://forum.xda-developers.com/android/apps-games/app-noyze-volume-panel-replacement-t2875501
Give Tombarr a thanks for developing such a slick and customizable app**)
11/18/15:
- Just started using voicemail for the first time in 6 years. Good thing because today I experienced a glitch that it would not let me hang up the phone after listening to voicemails for some reason, but it didn't do that when I was clearing voicemails. (Hangs up automatically after a certain amount of time) Maybe it happens to new voicemails. Also I'm assuming since the verizon voice mail app isn't installed I get a weird unreadable verizon text when I get a new voicemail.
- One hand mode is not in the settings. Not sure why
Any suggestions or thoughts about these current bugs would be helpful.
I cannot guarantee all Alliance settings will work (stay away from performance), but most does work and it's awesome!
This manual port is now stable and buttery smooth! All basic phone functions work. Let me know if you come across any bugs or issues not related to Alliance settings. I will try to help fix it.
Thanks Stedrocklp for taking the time to try and get this working. Jal3223 thanks for sharing that key porting info!!! Wouldn't be possible without your help! Thanks hsbadr for developing Multisystem kernel ! Thanks lacoursiere18 for creating this ROM !
UPDATE:
To update Alliance settings to the most recent version and remove 3mintbattery mod download the newest T-Mobile Alliance ROM v1.1
1. Use ES File Explorer and click on the Alliance ROM you just downloaded to open the archive.
2.
- Extract system/privapp/SystemUI/SYSTEMUI.apk
- In the system/app folder extract AllianceControl folder (towards the top) and all the loose apps without folders at the bottom to a folder on your sd card.
3. Make a system and data backup in TWRP just in case things go wrong. Reboot system
4. Swap all those files and folders in their appropriate file locations and change the folder permissions to 755 and files to 644. Take this step slow and make sure the old files are renamed to .old or overwritten. If a permission is incorrect or you leave a file out there can be issues and a restore might be needed.
5. In system/app folder delete the old loose Alliancecontrol.apk, and delete 3mintbattery.apk
6. Reboot and enjoy!
This is the final release of this ROM so we are all up to date ! :good:

Wondering if this will work for sprint or any rom

dyra502 said:
Wondering if this will work for sprint or any rom
Click to expand...
Click to collapse
I'm pretty sure it would but you need to figure out the sprint specific apps to make the system happy. And flash your sprint kernel after you dirty flash. The dirty flash skips the setup which makes it possible to boot correctly.

Would you mind sharing the Rick's ROM that you used? I looked at his thread, but the download links are no longer available. Thank you in advance for your help!

Romans8vs1 said:
Would you mind sharing the Rick's ROM that you used? I looked at his thread, but the download links are no longer available. Thank you in advance for your help!
Click to expand...
Click to collapse
Damn thats not good. I do not think I am allowed to share the ROM, as it's not mine. But I do not know how to share it anyways. I would just odin back to 4.4.4. and go through the upgrade process to OAF. Or you can try to de-xpose MoRom after a clean flash. I think there are two things you need to remove one being the xposed installer and the other I don't know the exact name but use root browser, search for xposed in the system folder, delete it, and reboot. No sure if it will messed anything up but I don't think it will. Then dirty flash the alliance beta and continue from there. Let me know how it goes!

jcip17 said:
Damn thats not good. I do not think I am allowed to share the ROM, as it's not mine. But I do not know how to share it anyways. I would just odin back to 4.4.4. and go through the upgrade process to OAF. Or you can try to de-xpose MoRom after a clean flash. I think there are two things you need to remove one being the xposed installer and the other I don't know the exact name but use root browser, search for xposed in the system folder, delete it, and reboot. No sure if it will messed anything up but I don't think it will. Then dirty flash the alliance beta and continue from there. Let me know how it goes!
Click to expand...
Click to collapse
Thank you for your response. I ODIN'd back to OAF and went through the steps in your tutorial. My phone booted up and I then proceeded to replace the files/folders and set permissions. I thought I was careful, but once I tried to reboot, the phone would not come back up.
Is there a way to make the changes (file permissions and replacing them in the ROM) on a PC?
Is there a way to share your edited files so that we could simply paste them into the ROM?
Just thought I would ask. Thank you in advance for your assistance!

Romans8vs1 said:
Thank you for your response. I ODIN'd back to OAF and went through the steps in your tutorial. My phone booted up and I then proceeded to replace the files/folders and set permissions. I thought I was careful, but once I tried to reboot, the phone would not come back up.
Is there a way to make the changes (file permissions and replacing them in the ROM) on a PC?
Is there a way to share your edited files so that we could simply paste them into the ROM?
Just thought I would ask. Thank you in advance for your assistance!
Click to expand...
Click to collapse
Damn thats a bummer. Even if I shared the files you would still need to change the permissions. I think it is possible unzip a verizon ROM and unzip Alliance rom and replace the files and then zip it back up on the computer and then dirty flash that but everytime I zip it back up it never flashes. It seems that when I zip it back up it adds an extra folder that makes it unflashable but haven't taken the time to figure out how to make it work. Try starting over and getting the ROM to boot then make a nandroid of that so you have something to restore. This is what I did when I was trying to get everything working. Next time try not adding the camera files and .jar file and add them after a reboot. Let me know how it goes.

Added the setup as one of the files to copy over so a factory reset can be performed to make sure you're starting with a fresh system. This is the first day I did this and I had to pull the battery twice due to freezes after I factory reset. I didn't let the phone sit and let it settle. I would recommend you let it sit and relax for like 10 mins. I have not had any lock ups since this morning. Lemmi know how it goes!

After the factory reset the ROM is flying. As for the battery I cannot say yet but I know I did not have the best battery life on this ROM before. It did get me through the day so I was happy about that. I calibrated the battery but that is about it. If any devs knows any battery optimizations that can be made to the system without xposed please share!

I heard from a user that Xposed works on this ROM. I personally do not use it though. As for battery life I've noticed better results after I disabled automatic check for updates in the settings. Settings > About device > Software Updates and uncheck auto check for updates. This ROM for some reason does not have the audio issues that I experienced on MoROMs ROM. I am happy about that. Now that we finally have the 5.1.1. update I am going to try and port a ROM that looks good. If anybody wants to give this a stab with me that would be great to test multiple ROMs from different carriers and see which one gives us the best results. Thanks

Got something amazing in the works!

Nandroid backup
Can someone send me a nandroid backup of this I'm worried about messing up my phone up

Is there a way to install this rom in the same manner as the kyobi note 5 port? I'm running that now, but would like to try this one out. I've tried a few times but just can't seem to get this one up and running.
Thanks in advance and have a blessed day!
Sent from my SM-N920F using Tapatalk

TheRock40359 said:
Can someone send me a nandroid backup of this I'm worried about messing up my phone up
Click to expand...
Click to collapse
That's a big file idk how I would be able to distribute that lol

Romans8vs1 said:
Is there a way to install this rom in the same manner as the kyobi note 5 port? I'm running that now, but would like to try this one out. I've tried a few times but just can't seem to get this one up and running.
Thanks in advance and have a blessed day!
Sent from my SM-N920F using Tapatalk
Click to expand...
Click to collapse
It's not that simple. A data fix would need to be made and that is out of the scope of my knowledge. But when I have some free time, possibly this weekend, I can attempt to come up with something for you to try.

jcip17 said:
That's a big file idk how I would be able to distribute that lol
Click to expand...
Click to collapse
Could upload it to dropbox

Anyone with a Developer addition phone willing to help us none developers get root/unlocked bootloader? New exploit found but we need an .aboot from a developer phone: http://forum.xda-developers.com/note...ition-t3346422

Since I am currently on BPA1 5.1.1 running the Kyubi ported ROM and this is a 5.0.1 ROM, will I have to do downgrade my device or anything or will I be good to go to dirty flash? Thanks in advance.

stajam said:
Since I am currently on BPA1 5.1.1 running the Kyubi ported ROM and this is a 5.0.1 ROM, will I have to do downgrade my device or anything or will I be good to go to dirty flash? Thanks in advance.
Click to expand...
Click to collapse
I don't recommend dirty flashing from Kyubi. You should try clean flashing MoRom then copying those files from the system. Then dirty flash Alliance, then multisystem kernel:
http://forum.xda-developers.com/not...opment/kernel-multiystem-kernel-v1-0-t3105603
And just follow the OP instructions.

jcip17 said:
I don't recommend dirty flashing from Kyubi. You should try clean flashing MoRom then copying those files from the system. Then dirty flash Alliance, then multisystem kernel:
http://forum.xda-developers.com/not...opment/kernel-multiystem-kernel-v1-0-t3105603
And just follow the OP instructions.
Click to expand...
Click to collapse
Yeah ,I am trying to pull the files I need from my stock ROM backup that I just freshly installed on my device. I stumbled upon a forum here today called Guides There seems to be ALOT of usefull stuff in here about Porting and Building ROM's. I don't know if you have ever come across it or not.

Xperia v 4,3 jelly bean failed to download xposed framework

Helo i have a 4,3 jelly bean xperia v which is rooted. Today i tried to download xposed framework via xposed installer but everytime i try to do it i get the error: Could not extract xposed-disabler recovery.zip. Please help me i really want to use xposed frame work.

Very strange on my phone its working without any problems. I've rooted with towelroot then installed supersu.
Make sure you have the latest xposed version (2.6.1) and allow root when it asks.

krasimiretov said:
Very strange on my phone its working without any problems. I've rooted with towelroot then installed supersu.
Make sure you have the latest xposed version (2.6.1) and allow root when it asks.
Click to expand...
Click to collapse
Hello thanks for your reply. I have towelroot just like you. Is there any flashable zip for the 2.6.1 version?

You don't need a flashable zip.
http://forum.xda-developers.com/showthread.php?t=2714053 Read this.

krasimiretov said:
You don't need a flashable zip.
http://forum.xda-developers.com/showthread.php?t=2714053 Read this.
Click to expand...
Click to collapse
Nope doesn't work. SD Card: null ... Could not extract Xposed-Disabler-recover.zip...... Wtf is this only me having this ****ty bug? Should i clean dalvik cache etc from recovery mode?

I dont know how to help you. How did you install it? Maybe you should do e clean install of your rom too.

I tried version 2.4 it worked. but the new version doesnt work. the old 2.4 version is bad you cant use gravitybox with it.

bump!!!!

What is your rom is it stock rom? You are doing something wrong. Write the exact steps you install it. I've installed it more than 30 times on my phone and never got sdcard error.

krasimiretov said:
What is your rom is it stock rom? You are doing something wrong. Write the exact steps you install it. I've installed it more than 30 times on my phone and never got sdcard error.
Click to expand...
Click to collapse
im currently using 4.3 jelly bean. I reseted my device but i think i have problem with my sd card or internal storage. because when i try to take pictures i cant. the stock gallery app wont save my pictures that i take with my camera. So i deleted the stock gallery app and downloaded the quickpic app. Now i can take photos and the quickpic app saves my photos. However when i take screenshoots it doesnt work..

You must have wrong partition permissions for your sdcard. Go to WhiteNeo CM12.1 thread then go to FAQ and find the terminal command for fixing storage permissions. Did you use CM12 before switching to stock rom? Or did you repartitioned your storage?

krasimiretov said:
You must have wrong partition permissions for your sdcard. Go to WhiteNeo CM12.1 thread then go to FAQ and find the terminal command for fixing storage permissions. Did you use CM12 before switching to stock rom? Or did you repartitioned your storage?
Click to expand...
Click to collapse
I used 4.4 kitkat rom from nightly cyangenomed but it bricked my device. i reinstalled a new stock rom via sony pc companion. I dont understand what has happend?
Here is the link for the rom that bricked my device before i installed custom rom
https://download.cyanogenmod.org/?device=tsubasa
cm-12-20151108-NIGHTLY-tsubasa.zip (273.21 MB)

Go to Settings, Storage and see if there is Internal storage. Does it shows some memory?

It says internal storage total space 3.71gb and availible space 2.32 gb. At the sd card it says total space 7.40gb and availible space 5.16gb

krasimiretov said:
Go to Settings, Storage and see if there is Internal storage. Does it shows some memory?
Click to expand...
Click to collapse
Please help after the cm12 rom bricked my device and i redownloaded stockrom i cant take pictures or open gallery. When i make The photos go to SD card it works but when i make new photos go to the internal memory it doesnt work. Something is wrong with my internal memorery this is why i cant download xposed framework

bumppp it works to take screenshots now i renamed pictures to pictures1 and it works now. i deleted the stock gallery app and im using quickpic because it shows me my screen shots and new photos. The xposed framework installation problem is still there... did the cm12 kitkat rom do something with my storages?

... I suggest you read this thread again because i've already answered that question...