Problem updating via RUU 170 USB error - One (M7) Q&A, Help & Troubleshooting

Hi, I am trying to get my phone back to stock but struggling, please can someone help?
When I try to use an RUU EXE file it comes up as a 170 USB error...

reflash .use recovery.
Sent from my ZTE N909 using XDA Free mobile app

kevinlanyou said:
reflash .use recovery.
Sent from my ZTE N909 using XDA Free mobile app
Click to expand...
Click to collapse
How?

simmo0020 said:
Hi, I am trying to get my phone back to stock but struggling, please can someone help?
When I try to use an RUU EXE file it comes up as a 170 USB error...
Click to expand...
Click to collapse
170 USB error is usually a problem with your drivers, are the installed correctly, both when in a booted rom and also in the bootloader, in Device manager it should say MyHTC, anything else then please refer to FAQ 2 here by @nkk71 http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Also which version of windows are you using and whichg RUU are you trying to flash, are you sure its the correct RUU for your device ? could you post your fastboot getvar all without imei and serial number.

Seanie280672 said:
170 USB error is usually a problem with your drivers, are the installed correctly, both when in a booted rom and also in the bootloader, in Device manager it should say MyHTC, anything else then please refer to FAQ 2 here by @nkk71 http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Also which version of windows are you using and whichg RUU are you trying to flash, are you sure its the correct RUU for your device ? could you post your fastboot getvar all without imei and serial number.
Click to expand...
Click to collapse
fastboot getvar all just comes up with waiting for device
I am on Windows 8.1 (pain)
The RUU is RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.exe

simmo0020 said:
fastboot getvar all just comes up with waiting for device
I am on Windows 8.1 (pain)
The RUU is RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
My HBOOT IS 1.44, so I guess this is where myh problem lies, any solution? I'm S-OFF

simmo0020 said:
fastboot getvar all just comes up with waiting for device
I am on Windows 8.1 (pain)
The RUU is RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
if your getting waiting for device then you don't have drivers installed, download HTC Sync Manager from the HTC site and install, once done go into add / remove programs and remove HTC Sync only leave HTC driver installer alone, when you plug your phone back in it should load the required drivers, if it comes up with Android 1.0 or One, refer back to that FAQ 2.
try and post your fastboot getavr all after that.
EDIT, 1.44 wont work with windows 8+ you'll need to use a Linux bootable or Windows 7.
---------- Post added at 01:55 PM ---------- Previous post was at 01:44 PM ----------
in fact, thinking about it, you wont be able to use an RUU.exe in Linux, so your only choice is going to be windows 7.

are you trying to strong brush firmwave ?
I don't think you need ! you just need a third part of recovery ,like cwm, twrp etc. and download a rom of you device(you can find for forum) then flash it . easy and Convenient!Don't always strong brush! so complicated ...now, I think you can flash a recovery
Sent from my ZTE N909 using XDA Free mobile app

simmo0020 said:
fastboot getvar all just comes up with waiting for device
I am on Windows 8.1 (pain)
The RUU is RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.exe
Click to expand...
Click to collapse
and please don't use that one, use the 1.28.401.7 instead

nkk71 said:
and please don't use that one, use the 1.28.401.7 instead
Click to expand...
Click to collapse
Can I not upgrade to a higher HBOOT?

kevinlanyou said:
are you trying to strong brush firmwave ?
I don't think you need ! you just need a third part of recovery ,like cwm, twrp etc. and download a rom of you device(you can find for forum) then flash it . easy and Convenient!Don't always strong brush! so complicated ...now, I think you can flash a recovery
Sent from my ZTE N909 using XDA Free mobile app
Click to expand...
Click to collapse
I have 3rd party recovery.
I don't want a custom ROM, I just want back to standard

simmo0020 said:
Can I not upgrade to a higher HBOOT?
Click to expand...
Click to collapse
not without flashing a firmware and you cant do that without working drivers.

simmo0020 said:
Can I not upgrade to a higher HBOOT?
Click to expand...
Click to collapse
i'd recommend you just make an ubuntu live USB (check the FAQ linked earlier) and use that to flash the decrypted ruu.zip
http://www.htc1guru.com/downloads/ruu-zip-downloads/
AFH mirror for the 1.28.401.7: http://www.androidfilehost.com/?fid=23329332407584993
Target device: HTC One M7_UL (modelid PN0710000)

nkk71 said:
i'd recommend you just make an ubuntu live USB (check the FAQ linked earlier) and use that to flash the decrypted ruu.zip
http://www.htc1guru.com/downloads/ruu-zip-downloads/
AFH mirror for the 1.28.401.7: http://www.androidfilehost.com/?fid=23329332407584993
Target device: HTC One M7_UL (modelid PN0710000)
Click to expand...
Click to collapse
Can you give me that in plain English please, step by step?

simmo0020 said:
Can you give me that in plain English please, step by step?
Click to expand...
Click to collapse
yes,
Assuming you have an HTC One M7_UL (since you didn't post a "fastboot getvar all" excluding IMEI and s/n, I don't know what phone you have)
1- create an Ubuntu Live USB (no need to install it, you can boot it from a USB stick): FAQ #5 here
2- download the ruu.zip M7_UL_JB_50_HTC_Europe_1.28.401.7 and check MD5, suitable for:
Code:
modelid: PN0710000
cidnum: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
rename the file to "ruu.zip"
3- flash it in ruu mode: In bootloader/FASTBOOT USB, flash it:
sudo fastboot oem rebootRUU
sudo fastboot flash zip ruu.zip
sudo fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
sudo fastboot reboot-bootloader
(sudo is needed in linux terminal for fastboot commands to work).
Does that help?

nkk71 said:
i'd recommend you just make an ubuntu live USB (check the FAQ linked earlier) and use that to flash the decrypted ruu.zip
http://www.htc1guru.com/downloads/ruu-zip-downloads/
AFH mirror for the 1.28.401.7: http://www.androidfilehost.com/?fid=23329332407584993
Target device: HTC One M7_UL (modelid PN0710000)
Click to expand...
Click to collapse
nkk71 said:
yes,
Assuming you have an HTC One M7_UL (since you didn't post a "fastboot getvar all" excluding IMEI and s/n, I don't know what phone you have)
1- create an Ubuntu Live USB (no need to install it, you can boot it from a USB stick): FAQ #5 here
2- download the ruu.zip M7_UL_JB_50_HTC_Europe_1.28.401.7 and check MD5, suitable for:
Code:
modelid: PN0710000
cidnum: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
rename the file to "ruu.zip"
3- flash it in ruu mode: In bootloader/FASTBOOT USB, flash it:
sudo fastboot oem rebootRUU
sudo fastboot flash zip ruu.zip
sudo fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
sudo fastboot reboot-bootloader
(sudo is needed in linux terminal for fastboot commands to work).
Does that help?
Click to expand...
Click to collapse
Kind of LOL
I only have access to a Windows 8.1 machine though

simmo0020 said:
Kind of LOL
I only have access to a Windows 8.1 machine though
Click to expand...
Click to collapse
Download Ubuntu 12 from there site, 32 bit is easier to work with, get the iso.
then see here: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows
then boot from it.

simmo0020 said:
Kind of LOL
I only have access to a Windows 8.1 machine though
Click to expand...
Click to collapse
hence Step 1: create an Ubuntu Live USB (requires a USB stick which will be formatted)

nkk71 said:
hence Step 1: create an Ubuntu Live USB (requires a USB stick which will be formatted)
Click to expand...
Click to collapse
Ok I will give it a go lol

nkk71 said:
hence Step 1: create an Ubuntu Live USB (requires a USB stick which will be formatted)
Click to expand...
Click to collapse
Have installed on my USB, selected to boot from the USB buts till goes in to Windows!!!

Related

[Tutorial][Rescue]Sprint HTC One users that flash GSM roms on their CDMA devices.

Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users on the latest 4.3/4.4.2 OTA are flashing 4.3/4.4.2 GSM roms and soft bricking their devices lately.
I have personally rescued a several devices in the past couple months so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
This guide is for Sprint HTC One users only.
3.04.651.2 RUU Thanks @OMJ
3.05.651.6 RUU From HTC
4.06.651.4 RUU Thanks @OMJ and @-viperboy-
5.03.651.3 RUU Thanks @OMJ **Note you will have to update your hboot to 1.57 in order for this RUU to work...solution is flash the 5.03.651.3 s-on firmware first.**
5.05.651.2 RUU
6.23.651.6 RUU Latest from htc.com
Device not recognized? (If you are using Windows 8.1 this will most likely not work unless your hboot is 1.55 or 1.56 or 1.57)
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Latest HTC Drivers AFH
Video showing how to flash the firmware Thanks @thoughtlesskyle
If you are S-OFF flash
3.04.651.2 s-off firmware
3.05.651.5 s-off firmware
3.05.651.6 s-off firmware
4.06.651.4 s-off firmware
5.03.651.3 s-off firmware
5.05.651.2 s-off firmware (Sense 6) and you are done.
If you are already on 4.06.651.4 or 4.06.651.9 you will have to flash the 3.05.651.6 s-off firmware first...reason being is the 4.06 s-off firmware does not have the latest radio included (use the same commands from 5.)
6.23.651.6 s-off firmware Latest and most likely the last.
**Note the 5.03.651.3 firmware has a new radio so no need to flash the older version to get the radio.**
If you are s-on follow these steps ALL the way to the end (there are no shortcuts unless you are s-off and step 9 is optional as noted)
1.Download
3.04.651.2 s-on firmware
3.05.651.5 s-on firmware
3.05.651.6 s-on firmware
4.06.651.4 s-on firmware
5.03.651.3 s-on firmware
5.05.651.2 s-on firmware (Sense 6)
6.23.651.6 s-on firmware Latest and most likely the last.
2.Rename it firmware.zip (put the firmware.zip into the platform tools folder or the folder attached below)
3.Boot to bootloader
4.Lock bootloader(fastboot oem lock)
5.Then use these commands:
Code:
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
6.If you get this error after the second command(most likely will)
Code:
failed 90 hboot pre-update! please flush image again immediately
press the UP Arrow on your keyboard and press enter to issue the command again.
7.Then unlock the bootloader again and re-flash Latest TWRP. (before formatting go to setting/screen and disable screen timeout)
8.Within Latest TWRP select Wipe > Format Data(it will ask you to confirm by typing YES) once done adb push a rom to your phone (adb push nameofrom.zip /sdcard/ ).
8a. If you are using the 4.06.651.4 s-on firmware I would suggest you push this Stock Rooted Odexed Rom to your device or it may not boot.
8b. After flashing the 4.06.651.4 rom you will most likely need to flash the latest radio because the 4.06 firmware does not have a radio included find it HERE
8c. If you are using the 5.03.651.3 s-on firmware I would suggest you push this 5.03.651.3_Stock | Rooted | 4.4.2 | Sense 6 to your device or it may not boot.
8d. If you are using the 6.23.651.6 s-on firmware I would suggest you push this [STOCK ROM] [5.0.2] [SENSE 6] Sprint 6.16.651.2 AND 6.23.651.3 to your device or it may not boot.
9.Optional but recommended: S-OFF using Sunshine
10.Win lol :victory:
Thanks @OMJ for the firmware
Thanks @thoughtlesskyle for the 5.03.651.3 firmware and stock odex rom
Thanks @beaups and @Fuses for Rumrunner and Firewater
Thanks @WayneQuasar for helping me figure out the correct order to do these steps(many hours and many failed attempts before we figured it out lol)
If you need assistance I'll be happy to help.
If you need help add me on hangouts [email protected]
First come first served please tell me your XDA name and a link to what you are having problems with.
bigdaddy619 said:
Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users on the latest 4.3 OTA are flashing 4.3 GSM roms and soft bricking their devices lately.
I have personally rescued a few devices in the past week so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
This guide is for Sprint HTC One users only.
Device not recognized? (If you are using Windows 8.1 this will most likely not work)
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
1.Download the s-on firmware zip
2.Rename it firmware.zip (put the firmware.zip into the folder you use to open your cmd window or the folder attached below)
3.Boot to bootloader
4.Lock bootloader(fastboot oem lock)
5.Then use these commands:
Code:
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
6.If you get this error after the second command(most likely will)
Code:
failed 90 hboot pre-update! please flush image again
press the UP Arrow on your keyboard and press enter to issue the command again.
7.Then unlock the bootloader again and re-flash TWRP.
8.Within TWRP select Wipe > Format Data(it will ask you to confirm by typing YES) once done sideload or adb push a rom to your phone.
9.Optional but recommended: S-OFF using Rumrunner
10.Win lol :victory:
Thanks @OMJ for the firmware
Thanks @beaups and @Fuses for Rumrunner
Thanks @WayneQuasar for helping me figure out the correct order to do these steps(many hours and many failed attempts before we figured it out lol)
If you need assistance I'll be happy to help.
Click to expand...
Click to collapse
I have followed your steps exactly, after I flash TWRP I try to enter recovery and it says "entering recovery..." for a few seconds then goes to a normal boot to a black screen. What should I do?
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
bigdaddy619 said:
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
Click to expand...
Click to collapse
I think so, but I am going to try with the link you gave.
---------- Post added at 11:00 PM ---------- Previous post was at 10:53 PM ----------
bigdaddy619 said:
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
Click to expand...
Click to collapse
Okay this worked!! Sorry I am very new to this, I know how to sideload, but what ROM should I use? I just want to get to stock rooted. does that mean OMJ's?
MacSkizzle said:
I think so, but I am going to try with the link you gave.
---------- Post added at 11:00 PM ---------- Previous post was at 10:53 PM ----------
Okay this worked!! Sorry I am very new to this, I know how to sideload, but what ROM should I use? I just want to get to stock rooted. does that mean OMJ's?
Click to expand...
Click to collapse
You can use OMJ's stock rooted or there is a Reset tool in Development if you want completely stock
bigdaddy619 said:
You can use OMJ's stock rooted or there is a Reset tool in Development if you want completely stock
Click to expand...
Click to collapse
Thank you so much! You really don't know how much stress you've relieved from me.:highfive:
MacSkizzle said:
Thank you so much! You really don't know how much stress you've relieved from me.:highfive:
Click to expand...
Click to collapse
NP good luck and yes I do know I help 2-3 a day haha
bigdaddy619 said:
NP good luck and yes I do know I help 2-3 a day haha
Click to expand...
Click to collapse
You aren't in the clear yet. When I start ADB sideload, it forever says starting adb sideload feature... What now?
MacSkizzle said:
You aren't in the clear yet. When I start ADB sideload, it forever says starting adb sideload feature... What now?
Click to expand...
Click to collapse
You have to put the zip in the folder you are using to run your commands
type adb sideload romname.zip
Then press enter
bigdaddy619 said:
You have to put the zip in the folder you are using to run your commands
type adb sideload romname.zip
Then press enter
Click to expand...
Click to collapse
I did that and got error: device not found. my adb version is 1.0.31, is it something wrong with drivers? again thanks for bearing with me
MacSkizzle said:
I did that and got error: device not found. my adb version is 1.0.31, is it something wrong with drivers? again thanks for bearing with me
Click to expand...
Click to collapse
Look in post one to fix the drivers
bigdaddy619 said:
Look in post one to fix the drivers
Click to expand...
Click to collapse
I already had the MyHTC drivers installed. I'm still getting "Starting ADB sideload feature..." on my phone and "error device not found" in my command.
MacSkizzle said:
I already had the MyHTC drivers installed. I'm still getting "Starting ADB sideload feature..." on my phone and "error device not found" in my command.
Click to expand...
Click to collapse
Uninstall it and start over, I know there are a few versions maybe you are using an older version coz it sounds like a driver issue
bigdaddy619 said:
Uninstall it and start over, I know there are a few versions maybe you are using an older version coz it sounds like a driver issue
Click to expand...
Click to collapse
After uninstalling the driver, i found my M7WLS and went to update the driver. I selected "Android USB Devices" the only drivers available are samsung ones.?
MacSkizzle said:
After uninstalling the driver, i found my M7WLS and went to update the driver. I selected "Android USB Devices" the only drivers available are samsung ones.?
Click to expand...
Click to collapse
Get the latest drivers from HERE the ones dated 6/6/13 and also the BMP drivers
bigdaddy619 said:
Get the latest drivers from HERE the ones dated 6/6/13 and also the BMP drivers
Click to expand...
Click to collapse
Downloaded and installed them, now there's nothing like ADB USB devices in my drivers to choose
MacSkizzle said:
Downloaded and installed them, now there's nothing like ADB USB devices in my drivers to choose
Click to expand...
Click to collapse
It should be one of the first 2 choices
Also try unistalling everything HTC and reboot your PC and re-install
bigdaddy619 said:
It should be one of the first 2 choices
Click to expand...
Click to collapse
My first two choices are 61883 device class and avc devices. did i somehow install drivers wrong?!
Did you see my edit?
bigdaddy619 said:
Did you see my edit?
Click to expand...
Click to collapse
will try
---------- Post added at 12:58 AM ---------- Previous post was at 12:41 AM ----------
MacSkizzle said:
will try
Click to expand...
Click to collapse
So I got the drivers installed but when I enter adb sideload on my phone it still just says starting. I tried sideloading a rom anyways and a whole mess of stuff shows up but doesn't reboot my phone or anything.

[SOLVED] Soft Bricked - Need Help!

Hi All,
I'm a noob when it comes to this stuff, but I've learned a lot over the last day. I soft bricked my HTC One Developer Edition while trying to do the most recent OTA update to 4.4.
What happens:
When booting normally, it goes initially to the normal white HTC screen, then to a "pink" screen (it's mostly pink, but it's really just messed up graphics), then goes to the HTC One loading screen (except BEATS is blue instead of red). Then it just freezes on that loading screen.
I can boot into the bootloader and recovery (currently TWRP, but was stock when doing the OTA update)
What I've tried:
I've used Fastboot to flash TWRP, so that part is good. Within TWRP, I've wiped the cache, system, Dalvik.
I've tried using Fastboot to flash the RUU Zip file (first one in the list here) in both Windows and OSX, while in "FASTBOOT USB" mode and in RUU mode. Each time, it starts sending, but around 43-44 secs it fails with "remote:not allowed: For reference, the top of the bootloader screen says TAMPERED, then UNLOCKED. I'm running HBOOT 1.55 and have S-ON (but unlocked bootloader). OS shows 3.22.1540.1
I can't get past the remote:not allowed issue, and I'm not such an expert to know what to try next. Can anyone please give me some tips on what to do next? I've tried searching, but I don't know what exactly to search for.
Thank you all!
awer25 said:
Hi All,
I'm a noob when it comes to this stuff, but I've learned a lot over the last day. I soft bricked my HTC One Developer Edition while trying to do the most recent OTA update to 4.4.
What happens:
When booting normally, it goes initially to the normal white HTC screen, then to a "pink" screen (it's mostly pink, but it's really just messed up graphics), then goes to the HTC One loading screen (except BEATS is blue instead of red). Then it just freezes on that loading screen.
I can boot into the bootloader and recovery (currently TWRP, but was stock when doing the OTA update)
What I've tried:
I've used Fastboot to flash TWRP, so that part is good. Within TWRP, I've wiped the cache, system, Dalvik.
I've tried using Fastboot to flash the RUU Zip file (first one in the list here) in both Windows and OSX, while in "FASTBOOT USB" mode. Each time, it starts sending, but around 43-44 secs it fails with "remote:not allowed: For reference, the top of the bootloader screen says TAMPERED, then UNLOCKED. I'm running HBOOT 1.55 and have S-ON (but unlocked bootloader). OS shows 3.22.1540.1
I can't get past the remote:not allowed issue, and I'm not such an expert to know what to try next. Can anyone please give me some tips on what to do next? I've tried searching, but I don't know what exactly to search for.
Thank you all!
Click to expand...
Click to collapse
Please post the output of ''fastboot getvar all'' minus your IMEI and serial no. And please post the commands your were using to flash the ruu.zip or a screenshot of your command prompt
alray said:
Please post the output of ''fastboot getvar all'' minus your IMEI and serial no. And please post the commands your were using to flash the ruu.zip or a screenshot of your command prompt
Click to expand...
Click to collapse
Thanks! The command prompt was fastboot flash zip rom.zip (I renamed it to that). For TWRP it was fastboot flash recovery recovery.img
GETVAR is attached.
EDIT: I added the command prompt and fail as well.
awer25 said:
Thanks! The command prompt was fastboot flash zip rom.zip (I renamed it to that). For TWRP it was fastboot flash recovery recovery.img
GETVAR is attached.
Click to expand...
Click to collapse
ok, first you can't flash that ruu you linked above (first in the list) because its a decrypted ruu. Decrypted ruu.zip require s-off and you are s-on. Whit s-on you can only flash signed ruu.
and btw did you enter ruu mode before ''fastboot flash zip rom.zip'' ?
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
awer25 said:
Thanks! The command prompt was fastboot flash zip rom.zip (I renamed it to that). For TWRP it was fastboot flash recovery recovery.img
GETVAR is attached.
EDIT: I added the command prompt and fail as well.
Click to expand...
Click to collapse
There is a 3.22.1540.1 RUU.exe on htcdev.com you could use to restore your phone. But it will not work using windows 8.1. what is your computer OS?
alray said:
ok, first you can't flash that ruu you linked above (first in the list) because its a decrypted ruu. Decrypted ruu.zip require s-off and you are s-on. Whit s-on you can only flash signed ruu.
and btw did you enter ruu mode before ''fastboot flash zip rom.zip'' ?
Thank you for that explanation. I got into RUU mode by doing fastboot oem rebootRUU, which took me to a black screen with silver HTC. That may not be RUU mode...I'm just guessing.
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
There is a 3.22.1540.1 RUU.exe on htcdev.com you could use to restore your phone. But it will not work using windows 8.1. what is your computer OS?
edit: Wait, there is also a 3.22.1540.1 ruu.zip on htcdev.com so try it first.
fastboot oem rebootRUU
fastboot flash zip <name_of_file>.zip
fastboot flash zip <name_of_file>.zip
fastboot reboot
Click to expand...
Click to collapse
Amazing! Thanks - I'll try this and let you know how it goes. I have Windows 8.1, but with fastboot and a zip file it should work, right? If not, I have a Windows 7 laptop at home.
awer25 said:
Amazing! Thanks - I'll try this and let you know how it goes. I have Windows 8.1, but with fastboot and a zip file it should work, right? If not, I have a Windows 7 laptop at home.
Click to expand...
Click to collapse
yes ruu.zip should work flawlessly with windows 8.1. but do not attempt the ruu.exe with 8.1, will work fine on 7.
alray said:
yes ruu.zip should work flawlessly with windows 8.1. but do not attempt the ruu.exe with 8.1, will work fine on 7.
Click to expand...
Click to collapse
I saw that I already had the 3.22.1540.1 zip file on my computer, so I tried. It got a lot further, but still failed with a remote:not allowed (see attached pic).
My next tries will be to re-download the file and try again, and if that fails, to try the RUU.exe file on the Windows 7 laptop. Is this correct, or is there something else I should try?
I'm leaving work now, so I won't be able to answer for another hour or so but thank you for your help thus far!
awer25 said:
I saw that I already had the 3.22.1540.1 zip file on my computer, so I tried. It got a lot further, but still failed with a remote:not allowed (see attached pic).
My next tries will be to re-download the file and try again, and if that fails, to try the RUU.exe file on the Windows 7 laptop. Is this correct, or is there something else I should try?
I'm leaving work now, so I won't be able to answer for another hour or so but thank you for your help thus far!
Click to expand...
Click to collapse
the ruu you have from the link you posted above is DECRYPTED it will not work with s-on!!!
alray said:
ok, first you can't flash that ruu you linked above (first in the list) because its a decrypted ruu. Decrypted ruu.zip require s-off and you are s-on.
Click to expand...
Click to collapse
And does the phone was in ruu mode? I don't see any ''fastboot oem rebootRUU'' from your screenshot...
alray said:
the ruu you have from the link you posted above is DECRYPTED it will not work with s-on!!!
And does the phone was in ruu mode? I don't see any ''fastboot oem rebootRUU'' from your screenshot...
Click to expand...
Click to collapse
Sorry I didn't explain better - the file I meant was the one from HTCDevs - I downloaded it a while ago when I had a different issue. I just renamed it to rom1 or whatever. Is this then the correct file?
Also, the phone was not in RUU mode - it was in regular fastboot mode ("FASTBOOT USB"). I'll try again in RUU mode.
awer25 said:
Sorry I didn't explain better - the file I meant was the one from HTCDevs - I downloaded it a while ago when I had a different issue. I just renamed it to rom1 or whatever. Is this then the correct file?
Also, the phone was not in RUU mode - it was in regular fastboot mode ("FASTBOOT USB"). I'll try again in RUU mode.
Click to expand...
Click to collapse
you can not flash ruu with fastboot. you MUST reboot phone in ruu mode using ''fastboot oem rebootRUU'' it will then reboot with a black screen and the htc logo. so:
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip <------ yes again!
fastboot reboot
When in ruu mode you'll have a screen similar to this:
then proceed with ''fastboot flash zip...................''
alray said:
you can not flash ruu with fastboot. you MUST reboot phone in ruu mode using ''fastboot oem rebootRUU'' it will then reboot with a black screen and the htc logo. so:
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip <------ yes again!
fastboot reboot
When in ruu mode you'll have a screen similar to this:
then proceed with ''fastboot flash zip...................''
Click to expand...
Click to collapse
Ok, I booted into RUU mode and flashed the file twice as per your instructions. Both times it failed. Screenshot is attached. (I even tried it a 3rd time but it still failed with the same message)
Also, I renamed the zip file to rom1.zip just to make typing it easier, but it is the file from HTCDevs, "3.22.1540.1 Developer Edition", Zip (not RUU).
Thank you!
awer25 said:
Ok, I booted into RUU mode and flashed the file twice as per your instructions. Both times it failed. Screenshot is attached. (I even tried it a 3rd time but it still failed with the same message)
Also, I renamed the zip file to rom1.zip just to make typing it easier, but it is the file from HTCDevs, "3.22.1540.1 Developer Edition", Zip (not RUU).
Thank you!
Click to expand...
Click to collapse
Try the ruu.exe on windows 7.
alray said:
Try the ruu.exe on windows 7.
Click to expand...
Click to collapse
Ok, I tried it on the Windows 7 laptop and got another error (155 - unknown error). Pic is attached. It was in RUU mode btw.
I'm currently downloading the older 1.29.xx version (Android 4.1) and will try again with that.
Just for my own knowledge - how many "parts" (partitions?) of the system are there? As in, there's the recovery partition, the "main" ROM, etc. Are those the only two? I only ask because I wonder if I messed up something in another part that makes the phone think it's not the Developer Edition? (the errors seem to point to using the wrong image, but I got it directly from HTCDevs and have now tried both the RUU and Zip versions.
awer25 said:
Ok, I tried it on the Windows 7 laptop and got another error (155 - unknown error). Pic is attached. It was in RUU mode btw.
I'm currently downloading the older 1.29.xx version (Android 4.1) and will try again with that.
Just for my own knowledge - how many "parts" (partitions?) of the system are there? As in, there's the recovery partition, the "main" ROM, etc. Are those the only two? I only ask because I wonder if I messed up something in another part that makes the phone think it's not the Developer Edition? (the errors seem to point to using the wrong image, but I got it directly from HTCDevs and have now tried both the RUU and Zip versions.
Click to expand...
Click to collapse
I got it! I had to relock my bootloader for some reason. Then, the Windows RUU installed fine.
Thank you alray for your help!
Is being stuck at the booting screen (Htc one with beats audio (red color)) same as this scenario ? Is it soft bricked or boot looped or what's it called?
I'm S-off, rooted, stock rom, hboot is 1.56 w/ CWM. At some point the phone just rebooted on its own (I was even in a different place at that time!!!) and got stuck forever at that screen. Rebooting would just make it get stuck there again. bootloader, custom recovery all work.
what do?
-marco- said:
Is being stuck at the booting screen (Htc one with beats audio (red color)) same as this scenario ? Is it soft bricked or boot looped or what's it called?
I'm S-off, rooted, stock rom, hboot is 1.56 w/ CWM. At some point the phone just rebooted on its own (I was even in a different place at that time!!!) and got stuck forever at that screen. Rebooting would just make it get stuck there again. bootloader, custom recovery all work.
what do?
Click to expand...
Click to collapse
Mine did get stuck there, but after a weird messed up pink screen (and the Beats text was blue, not red for some reason). If I was in your boat, I'd just flash a fresh rom and be done.
awer25 said:
Mine did get stuck there, but after a weird messed up pink screen (and the Beats text was blue, not red for some reason). If I was in your boat, I'd just flash a fresh rom and be done.
Click to expand...
Click to collapse
thanks !
but which one? And how?
also getvar !
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.707.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3867mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-59adc32b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
-marco- said:
thanks !
but which one? And how?
also getvar !
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-main: 4.20.707.6
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
finished. total time: 0.066s
Click to expand...
Click to collapse
-marco- said:
I am at work in the office and at some point I look at my phone and I see it rebooted on its own. now it's stuck forever on the HTC one beats audio loading screen.
I didn't even touch anything before. Tried to reboot but it just gets stuck there.
Click to expand...
Click to collapse
1- Please also post a screenshot of bootloader.
2- So you're on completely stock ROM?
3- are you able to enter recovery?
4- have you simply tried "fastboot erase cache" and tried booting?
nkk71 said:
1- Please also post a screenshot of bootloader.
2- So you're on completely stock ROM?
3- are you able to enter recovery?
4- have you simply tried "fastboot erase cache" and tried booting?
Click to expand...
Click to collapse
Thanks man!
Let's get this started:
1- done, see attached.
2- yes, up to latest OTA but i was rooted.
3- yes , CWM
4- done, still gets stuck at the same screen.
now: million $ question - is there a way to get out of this stupid problem without having to lose any data at all ? one gets quite sick at having to wipe and restore backups everytime there's a booting problem with the phone. i remember with the SGS2 i just had to reflash with odin the rom i was using and boom, back in order!
-marco- said:
Thanks man!
Let's get this started:
1- done, see attached.
2- yes, up to latest OTA but i was rooted.
3- yes , CWM
4- done, still gets stuck at the same screen.
now: million $ question - is there a way to get out of this stupid problem without having to lose any data at all ? one gets quite sick at having to wipe and restore backups everytime there's a booting problem with the phone. i remember with the SGS2 i just had to reflash with odin the rom i was using and boom, back in order!
Click to expand...
Click to collapse
Well first I would recommend you update recovery to TWRP
2.6.3.3: http://techerrata.com/browse/twrp2/m7
or 2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
since they are more compatible when flashing 4.4 ROMs (make sure to check MD5 on the files, that site doesn't play nice with download managers!)
Code:
[B]fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader[/B]
-> enter recovery
Second, in TWRP, make a nandroid backup, you may need it later *** (please check below)
Third, put a ROM on the phone (in custom recovery):
Code:
C:\ADB3>[B]adb devices[/B]
List of devices attached
HT34xxxxxxxx recovery <- you need to be in recovery
[B]adb push <name of rom>.zip /sdcard/[/B] <- this will take about 5 mins without any progress
and install the ROM, don't select WIPE during installation, and you should have your million $ question solved... all apps, data, etc should be there, but if you get apps crashing it's because of the "dirty-flash"
As to which ROMs you can use for the above procedure, there's is a 100% stock version of 4.19.401.9 here: http://forum.xda-developers.com/showthread.php?t=2224752
I'm personally using ARHD 52.0 from here: http://forum.xda-developers.com/showthread.php?t=2183023 (stock but with improvements, and rooted)
I haven't checked if there's a 100% stock 4.20.707.6 ROM around, so you could do some googling and see.
Hope that helps
*** once you've done the backup, you can try wiping "data, cache, dalvik", and then restore the nandroid... sometimes that works
if not keep the nandroid, as it has all the information, and you can use Nandroid Manager (in play store) to extract individual information, if need be.
Good Luck

[Q] htc 802w Dual Sim, my problem has never happened before,bootlop after Romcleaner.

(sorry for my Bad english sir)
Yesterday i want to root my Htc 802w Dual Sim China Unicom
i followed the procedures of a website (i forget the website)
- First, I have Unlocked my bootloader --> succesfully
- then, i have flash recovery via fastboot and succesfully installed CWM (file name is cwm802w.zip) ---> succesfully
- after that, i try to install SuperSU (file name is SuperSU-root-v1.25.zip) and i copy to my Sd Card root and flash it via CWM recovery ---> its seems like succesfully rooted but..my Root Explorer app say still has not rooted <--- but I ignored it..,and resume to the next step immediately.
- in the next step, i copy ROM_Cleaner_v2.2.zip and Romcleaner_user.txt to my SD card root
- i goin to Cwm Recovery mode and try to flashing Romcleaner (i think ive made mistake, and also i forget to Backup my phone *OMG!!!) when phone rebooted, the screen show "Android upgrading...and stuck there :crying:
I waited too long, so i turn off my phone immediately, turn on it , Phone is On with Black screen but can still received Call.
Im panicked sir, cause this is my Sister phone.
so, i try to (BIG MISTAKE) download any Custom and flash .img file also flash the ROM from CWM Recovery, (i think This might be a way out from this,BUT...)
now My phone is bricked, bootloop before show up Htc logo.
what should i do sir, please help me.
my Getvar
[IMG="my Getvar"[/IMG][/HIDE]
my Bootloader
[HIDE][B]
*** TAMPERED ***
[COLOR="Magenta"]*** UNLOCKED ***[/COLOR]
M7CDUG PVT SHIP S-ON RH
HBOOT-2.49.0000
RADIO-U3.15.3509.12
OpenDSP-v32.120.274.0909
QSC-1237.28.34.0106
OS-5.15.1402.3
eMMC-boot 2048MB
May 9 2014, 18:51:58.0
[/B]
Obbie Malmsteen said:
(sorry for my Bad english sir)
Yesterday i want to root my Htc 802w Dual Sim China Unicom
i followed the procedures of a website (i forget the website)
- First, I have Unlocked my bootloader --> succesfully
- then, i have flash recovery via fastboot and succesfully installed CWM (file name is cwm802w.zip) ---> succesfully
- after that, i try to install SuperSU (file name is SuperSU-root-v1.25.zip) and i copy to my Sd Card root and flash it via CWM recovery ---> its seems like succesfully rooted but..my Root Explorer app say still has not rooted <--- but I ignored it..,and resume to the next step immediately.
- in the next step, i copy ROM_Cleaner_v2.2.zip and Romcleaner_user.txt to my SD card root
- i goin to Cwm Recovery mode and try to flashing Romcleaner (i think ive made mistake, and also i forget to Backup my phone *OMG!!!) when phone rebooted, the screen show "Android upgrading...and stuck there :crying:
I waited too long, so i turn off my phone immediately, turn on it , Phone is On with Black screen but can still received Call.
Im panicked sir, cause this is my Sister phone.
so, i try to (BIG MISTAKE) download any Custom and flash .img file also flash the ROM from CWM Recovery, (i think This might be a way out from this,BUT...)
now My phone is bricked, bootloop before show up Htc logo.
what should i do sir, please help me.
my Bootloader
*** TAMPERED ***
*** UNLOCKED ***
M7CDUG PVT SHIP S-ON RH
HBOOT-2.49.0000
RADIO-U3.15.3509.12
OpenDSP-v32.120.274.0909
QSC-1237.28.34.0106
OS-5.15.1402.3
eMMC-boot 2048MB
May 9 2014, 18:51:58.0
Click to expand...
Click to collapse
First, remove your imei and serialno from the getvar all!
You can try to run the RUU for your phone. You can get it from here. It should be PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1 402.3_Radio_1237.28.34.0106_release_373024_signed_ 2.zip - 1.10 GB. Please check the MD5 after you download it. You will have to relock your bootloader to run the RUU since you are S-ON. This will put you back to stock then you can decide where you want to go from there.
majmoz said:
First, remove your imei and serialno from the getvar all!
You can try to run the RUU for your phone. You can get it from here. It should be PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1 402.3_Radio_1237.28.34.0106_release_373024_signed_ 2.zip - 1.10 GB. Please check the MD5 after you download it. You will have to relock your bootloader to run the RUU since you are S-ON. This will put you back to stock then you can decide where you want to go from there.
Click to expand...
Click to collapse
thank you for replay sir,
i will try it,
majmoz said:
First, remove your imei and serialno from the getvar all!
You can try to run the RUU for your phone. You can get it from here. It should be PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1 402.3_Radio_1237.28.34.0106_release_373024_signed_ 2.zip - 1.10 GB. Please check the MD5 after you download it. You will have to relock your bootloader to run the RUU since you are S-ON. This will put you back to stock then you can decide where you want to go from there.
Click to expand...
Click to collapse
i just finished my work today, and im at home now..
how to remove imei and serialno sir? or just run RUU?
Obbie Malmsteen said:
i just finished my work today, and im at home now..
how to remove imei and serialno sir? or just run RUU?
Click to expand...
Click to collapse
In your first post, you posted your fastboot getvar all. In the getvar all it list your imei and serialno, you do not want those to get out to the internet where people can spoof your phone. Running the RUU has no bearing on your first post, so you can run it at anytime.
Obbie Malmsteen said:
i just finished my work today, and im at home now..
how to remove imei and serialno sir? or just run RUU?
Click to expand...
Click to collapse
majmoz said:
In your first post, you posted your fastboot getvar all. In the getvar all it list your imei and serialno, you do not want those to get out to the internet where people can spoof your phone. Running the RUU has no bearing on your first post, so you can run it at anytime.
Click to expand...
Click to collapse
ok sir, thanks,
and i have downloade the RUU and still same for me,
sending 'zip' (1150783 KB)...
OKAY [ 48.843s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 159.382s
and my bootloader is relocked
Obbie Malmsteen said:
ok sir, thanks,
and i have downloade the RUU and still same for me,
sending 'zip' (1150783 KB)...
OKAY [ 48.843s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 159.382s
and my bootloader is relocked
Click to expand...
Click to collapse
Did you check the MD5 to see if the download was corrupt?
Did you use these steps to run the RUU?
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3_Radio_1237.28.34.0106_release_373024_signed_ 2.zip -- you could rename the file to shorten it
majmoz said:
Did you check the MD5 to see if the download was corrupt?
Did you use these steps to run the RUU?
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip PN07IMG_M7C_DUG_K44_SENSE60_MR_HTCCN_CHS_CU_5.15.1402.3_Radio_1237.28.34.0106_release_373024_signed_ 2.zip -- you could rename the file to shorten it
Click to expand...
Click to collapse
yes i did sir,, i have doing all of that
and the md5 is ok
Sent from my Xcoyria V using XDA Premium 4 mobile app
Obbie Malmsteen said:
yes i did sir,, i have doing all of that
Click to expand...
Click to collapse
I got the file from [Collection] HTC Dual Sim 802d, 802t, 802w - Official RUU, OTA and CWM and for your phone there are two KK RUU but only one that matches your MID, CID and OS. I could not find a firmware package for your phone. Can you find another computer to try the RUU on or do you have a Linux computer to try? This post will explain how to put Linux on a USB stick, that way you can boot from the usb stick and keep your window files intact. While in Linux put sudo in front of the fastboot commands.
Since, you are presently able to get to the bootloader you could try to install CWM recovery. If that works, then try a custom rom for your phone version but do not install Rom Cleaner. :fingers-crossed:
---------- Post added at 05:51 PM ---------- Previous post was at 05:43 PM ----------
Obbie Malmsteen said:
and the md5 is ok
Sent from my Xcoyria V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I had another thought. Go to the [Collection] and download the earlier RUU 4.21.1402.3. Then try to install it, it should fail but it may setup something to make the RUU 5.15.1402.3 complete properly.
thank you,
ok sir, but before i try to do that,
is there a possibility of error or something has been lost after I do this sir →
Obbie Malmsteen said:
- i goin to Cwm Recovery mode and try to flashing Romcleaner & also try to remove china app (i think ive made mistake, and also i forget to Backup my phone *OMG!!!) when phone rebooted, the screen show "Android upgrading...and stuck there :crying:
I waited too long, so i turn off my phone immediately, turn on it , Phone is On with Black screen but can still received Call.
and still can open Setting from notification bar, but there is no App icon in homescreen and drawer.
an then
i try to download any Custom and flash .img file also flash the ROM from CWM Recovery, *actualy my phone is not Rooted sir*
now My phone is bricked, bootloop before show up Htc logo.
Click to expand...
Click to collapse
is there a possibility of error or something has been lost after I do this sir? if not, ill try your guide below..
Sent from my Xcoyria V using XDA Premium 4 mobile app
Obbie Malmsteen said:
thank you,
ok sir, but before i try to do that,
is there a possibility of error or something has been lost after I do this sir? if not, ill try your guide below..
Sent from my Xcoyria V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Flashing a RUU is the best way to return a phone to stock. It puts all of the pieces in the correct places. Usually to successfully flash a RUU for S-ON phones, the bootloader is locked, CID & MID must match, hboot must be the same or higher and the OS must be the same or higher. Double check to see if your bootloader is LOCKED or RELOCKED. The other thing is the PC, it may be interfering with how the RUU is operating.
majmoz said:
Flashing a RUU is the best way to return a phone to stock. It puts all of the pieces in the correct places. Usually to successfully flash a RUU for S-ON phones, the bootloader is locked, CID & MID must match, hboot must be the same or higher and the OS must be the same or higher. Double check to see if your bootloader is LOCKED or RELOCKED. The other thing is the PC, it may be interfering with how the RUU is operating.
Click to expand...
Click to collapse
oh i forget to tell you sir,
when i relocked my phone , the bootloader show this --->
**** TAMPERED ***
**** RELOCKED ***
**** Security Warning ***

[Q] Help stuck in recovery loop

Hey my HTC won't enter into recovery how do I fix it I have tried resetting the ruu but it keeps saying failed I need help bad ?
Yotekiller said:
Hey my HTC won't enter into recovery how do I fix it I have tried resetting the ruu but it keeps saying failed I need help bad ?
Click to expand...
Click to collapse
you have an AT&T Phone what file are you trying to flash? and how long has your OS been like that in the bootloader ?
Also your s-off so relocking the bootloader was not needed
clsA said:
you have an AT&T Phone what file are you trying to flash? and how long has your OS been like that in the bootloader ?
Also your s-off so relocking the bootloader was not needed
Click to expand...
Click to collapse
It's been like this for 60 days I have been in jail lol it crashed right before I went in yes it's att the file is a ruu zip m7 ul jb43 sense50 Mr cinguler us 3.17.502.3 decrypted sorry I didn't have the link handy for the file
Yotekiller said:
Hey my HTC won't enter into recovery how do I fix it I have tried resetting the ruu but it keeps saying failed I need help bad ?
Click to expand...
Click to collapse
can you post a "fastboot getvar all" excluding IMEI and s/n
it looks like you messed up some things, including your misc partition, fix that first: http://forum.xda-developers.com/showthread.php?t=2739126
then use an RUU
PS: you'll need to have bootloader unlocked, if you can't manage to unlock it in this state, let me know (but i'll need the output of your getvar all, excluding IMEI and s/n)
getvar all
nkk71 said:
can you post a "fastboot getvar all" excluding IMEI and s/n
it looks like you messed up some things, including your misc partition, fix that first: http://forum.xda-developers.com/showthread.php?t=2739126
then use an RUU
PS: you'll need to have bootloader unlocked, if you can't manage to unlock it in this state, let me know (but i'll need the output of your getvar all, excluding IMEI and s/n)
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 000000000000
(bootloader) imei: 000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4042mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Screen shot
This is all I get when eentering recovery
yotekiller82 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-main: 8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First off, make sure you're not on Windows 8.1, use Win7 or ubuntu or mac.
flash the attached file (that will downgrade hboot to 1.44, and install the noBCB recovery):
fastboot oem rebootRUU
fastboot flash zip fw_hb144_twrp-nobcb.zip
fastboot flash zip fw_hb144_twrp-nobcb.zip <- yes TWICE
fastboot reboot-bootloader
fastboot erase cache
-> enter RECOVERY
then follow the steps http://forum.xda-developers.com/showthread.php?t=2739126 to fix your corrupted misc partition.
once done, use https://www.androidfilehost.com/?fid=23501681358544977 to reset everything back to stock (in case something else is corrupt)
rename the above file to ruu.zip:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE
fastboot reboot-bootloader
i tried that didnt work
nkk71 said:
First off, make sure you're not on Windows 8.1, use Win7 or ubuntu or mac.
flash the attached file (that will downgrade hboot to 1.44, and install the noBCB recovery):
fastboot oem rebootRUU
fastboot flash zip fw_hb144_twrp-nobcb.zip
fastboot flash zip fw_hb144_twrp-nobcb.zip <- yes TWICE
fastboot reboot-bootloader
fastboot erase cache
-> enter RECOVERY
then follow the steps http://forum.xda-developers.com/showthread.php?t=2739126 to fix your corrupted misc partition.
once done, use https://www.androidfilehost.com/?fid=23501681358544977 to reset everything back to stock (in case something else is corrupt)
rename the above file to ruu.zip:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE
fastboot reboot-bootloader
Click to expand...
Click to collapse
ok the first step worked but everytime i try to step 2 it locks up my pc and wont push the ruu onto the phone any help on that one im using a laptop with win 7
yotekiller82 said:
ok the first step worked but everytime i try to step 2 it locks up my pc and wont push the ruu onto the phone any help on that one im using a laptop with win 7
Click to expand...
Click to collapse
can you be more specific, which "step 2" doesn't work, also best to copy/paste your command prompt output (please copy/paste, screenshots are very hard to read).
Step 2
nkk71 said:
can you be more specific, which "step 2" doesn't work, also best to copy/paste your command prompt output (please copy/paste, screenshots are very hard to read).
Click to expand...
Click to collapse
OK the first part of the post went good downgraded the hboot to 1.44 the second ruu won't go to the phone when you try to push it on it looks like it works it starts flashing a single bar on the next line a couple times then locks up the pic while the phone is setting in the black logo I have let it set for 20 min what is going on Idk how much more I can tell yall
I have got a copy of skydragon to flash in recovery but in the initial setupit keep rebooting so iI'm getting closer if that helps
Yotekiller said:
OK the first part of the post went good downgraded the hboot to 1.44 the second ruu won't go to the phone when you try to push it on it looks like it works it starts flashing a single bar on the next line a couple times then locks up the pic while the phone is setting in the black logo I have let it set for 20 min what is going on Idk how much more I can tell yall
I have got a copy of skydragon to flash in recovery but in the initial setupit keep rebooting so iI'm getting closer if that helps
Click to expand...
Click to collapse
Do you have htcsync installed on your pc it's known to cause problems with RUU mode. If so uninstall htcsync but keep the drivers.
Then try flash the RUU again
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Htc sync
Danny201281 said:
Do you have htcsync installed on your pc it's known to cause problems with RUU mode. If so uninstall htcsync but keep the drivers.
Then try flash the RUU again
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
Click to expand...
Click to collapse
No I don't have htc sync installed ? I really need my phone back up and running
Yotekiller said:
No I don't have htc sync installed ? I really need my phone back up and running
Click to expand...
Click to collapse
just reboot the phone and start the RUU process again till it finishes.
Did you md5 check your RUU download to be sure it's not corrupt ?
Yotekiller said:
OK the first part of the post went good downgraded the hboot to 1.44 the second ruu won't go to the phone when you try to push it on it looks like it works it starts flashing a single bar on the next line a couple times then locks up the pic while the phone is setting in the black logo I have let it set for 20 min what is going on Idk how much more I can tell yall
I have got a copy of skydragon to flash in recovery but in the initial setupit keep rebooting so iI'm getting closer if that helps
Click to expand...
Click to collapse
It would really help, if you copy/pasted your command prompt output.
Let's break this down again:
Step 1
First off, make sure you're not on Windows 8.1, use Win7 or ubuntu or mac.​
Step 2
flash the attached file (that will downgrade hboot to 1.44, and install the noBCB recovery):
fastboot oem rebootRUU
fastboot flash zip fw_hb144_twrp-nobcb.zip
fastboot flash zip fw_hb144_twrp-nobcb.zip <- yes TWICE
fastboot reboot-bootloader
fastboot erase cache​
Step 3
-> enter RECOVERY
then follow the steps http://forum.xda-developers.com/showthread.php?t=2739126 to fix your corrupted misc partition.​
Step 4
once done, use https://www.androidfilehost.com/?fid=23501681358544977 to reset everything back to stock (in case something else is corrupt)
rename the above file to ruu.zip:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE
fastboot reboot-bootloader​
Am understanding correctly that
Step 1: confirmed
Step 2: successful
Step 3: completed successfully
Step 4: this is where you get stuck??
Reboot the ruu
nkk71 said:
It would really help, if you copy/pasted your command prompt output.
Let's break this down again:
Step 1
First off, make sure you're not on Windows 8.1, use Win7 or ubuntu or mac.​
Step 2
flash the attached file (that will downgrade hboot to 1.44, and install the noBCB recovery):
fastboot oem rebootRUU
fastboot flash zip fw_hb144_twrp-nobcb.zip
fastboot flash zip fw_hb144_twrp-nobcb.zip <- yes TWICE
fastboot reboot-bootloader
fastboot erase cache​
Step 3
-> enter RECOVERY
then follow the steps http://forum.xda-developers.com/showthread.php?t=2739126 to fix your corrupted misc partition.​
Step 4
once done, use https://www.androidfilehost.com/?fid=23501681358544977 to reset everything back to stock (in case something else is corrupt)
rename the above file to ruu.zip:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE
fastboot reboot-bootloader​
Am understanding correctly that
Step 1: confirmed
Step 2: successful
Step 3: completed successfully
Step 4: this is where you get stuck??
Click to expand...
Click to collapse
Yes step 4 trying to flash the second file you give me
Yotekiller said:
Yes step 4 trying to flash the second file you give me
Click to expand...
Click to collapse
check MD5, and if the error persists:
hint:
It would really help, if you copy/pasted your command prompt output.
Copying command
nkk71 said:
check MD5, and if the error persists:
hint:
It would really help, if you copy/pasted your command prompt output.
Click to expand...
Click to collapse
It's kind of hard to do as I start the step 4 and it locks up the pc it won't response to anythingiI do I'm sorry I'm new to all this is there something I can do to get the pc to stop freezing up
I'm sorry if I don't understand what your trying to tell me ?
Yotekiller said:
It's kind of hard to do as I start the step 4 and it locks up the pc it won't response to anythingiI do I'm sorry I'm new to all this is there something I can do to get the pc to stop freezing up
I'm sorry if I don't understand what your trying to tell me ��
Click to expand...
Click to collapse
your pc completely freezes
then either fix your PC issues (whatever they may be, drivers, antivirus programs, firewalls, etc), or make life simple and make an Ubuntu Live USB (no need to install it, you can boot directly off a USB stick), check FAQ #5 here
The computer
nkk71 said:
your pc completely freezes
then either fix your PC issues (whatever they may be, drivers, antivirus programs, firewalls, etc), or make life simple and make an Ubuntu Live USB (no need to install it, you can boot directly off a USB stick), check FAQ #5 here
Click to expand...
Click to collapse
Yea the computer freezes up won't do nothing working on gettinga uUSB drive fixed up I don't have the fastest Internet where I live so lol sorry I have been trouble
Update I have one of my laptops running ubuntu now so hopefully in the next few days I can get all the drivers and everything I need to get the phone running again thanks for the help will update asap
Yotekiller said:
Yea the computer freezes up won't do nothing working on gettinga uUSB drive fixed up I don't have the fastest Internet where I live so lol sorry I have been trouble
Update I have one of my laptops running ubuntu now so hopefully in the next few days I can get all the drivers and everything I need to get the phone running again thanks for the help will update asap
Click to expand...
Click to collapse
You don't need drivers for your phone on ubuntu. If you have ubuntu running with adb/fastboot installed that's all you need. It will work
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk

[Q] HTC One weird issue

Short explanation: My internal storage isnt recognized in android os and it is in twrp.
Long explanation
I followed a video on how to root a htc one m7 on youtube. This was my first time I ever rooted a phone.
I did a backup of the stock os after installing twrp and have it till this day on the phones internal storage.
I recently wanted to install multirom, it installed with an error. So I found an "uninstallmultirom.zip" file somewhere in the internet and from that moment...
My internal storage isnt recognized in android os but it is in twrp.
PS: I restored the phone using the backup I created earlier. It didnt fix the issue.
HTC ONE M7 Info:
version-main: 7.18.161.2
carrier: Vodafone UK
android version: 5.0.2
Is unlocked.
Cola Vs Pepsi said:
Short explanation: My internal storage isnt recognized in android os and it is in twrp.
Long explanation
I followed a video on how to root a htc one m7 on youtube. This was my first time I ever rooted a phone.
I did a backup of the stock os after installing twrp and have it till this day on the phones internal storage.
I recently wanted to install multirom, it installed with an error. So I found an "uninstallmultirom.zip" file somewhere in the internet and from that moment...
My internal storage isnt recognized in android os but it is in twrp.
PS: I restored the phone using the backup I created earlier. It didnt fix the issue.
HTC ONE M7 Info:
version-main: 7.18.161.2
carrier: Vodafone UK
android version: 5.0.2
Is unlocked.
Click to expand...
Click to collapse
relock and flash the 7.18.161.2 ruu
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
Help
Ok so I followed a youtube video and used the vodafone ruu.
It doesnt seem to flash the ruu :/
Cola Vs Pepsi said:
Ok so I followed a youtube video and used the vodafone ruu.
It doesnt seem to flash the ruu :/
Click to expand...
Click to collapse
did you used htc fastboot ?
yatindroid said:
did you used htc fastboot ?
Click to expand...
Click to collapse
I think I have. I used the same fastboot when I was rooting. Can you give me a link to the htc one?
Cola Vs Pepsi said:
I think I have. I used the same fastboot when I was rooting. Can you give me a link to the htc one?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934539737
rename old fastboot to fastboot_old
put htc fastboot with rename it fastboot
then follow flash commands
yatindroid said:
https://www.androidfilehost.com/?fid=95916177934539737
rename old fastboot to fastboot_old
put htc fastboot with rename it fastboot
then follow flash commands
Click to expand...
Click to collapse
What commands will I follow?
The bootloader is relocked
Cola Vs Pepsi said:
Ok so I followed a youtube video and used the vodafone ruu.
It doesnt seem to flash the ruu :/
Click to expand...
Click to collapse
Cola Vs Pepsi said:
What commands will I follow?
The bootloader is relocked
Click to expand...
Click to collapse
Everything was explained in the link I gave you at post #2. (read the OP):
How To Flash
1. Rename file to RUU.zip
2. Place it in adb folder
3. Reboot phone to fastboot mode
4. S On need to relock bootloader (fastboot oem lock) , S Off lock not needed
5. Also use the htc_fastboot.exe not the normal fastboot.exe
get the htc_fastboot.exe here : https://www.androidfilehost.com/?fid=95916177934539737
Rename htc_fastboot to fastboot or if you don't rename it, then the command will be "htc_fastboot flash zip RUU.zip"
Run the following commands from your adb folder:
6. htc_fastboot oem rebootRUU
7.htc_fastboot flash zip RUU.zip
8.htc_fastboot reboot-bootloader
Click to expand...
Click to collapse
Like yatin said, you need to use htc's fastboot to flash this ruu, not the normal fastboot. Rename your normal fastboot to "fastboot_old" like suggested by yatin then downloa htc's fastboot and save it in the same folder you have your old fastboot. once done open a command prompt:
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
alray said:
Everything was explained in the link I gave you at post #2. (read the OP):
How To Flash
Like yatin said, you need to use htc's fastboot to flash this ruu, not the normal fastboot. Rename your normal fastboot to "fastboot_old" like suggested by yatin then downloa htc's fastboot and save it in the same folder you have your old fastboot. once done open a command prompt:
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
THANKS SO MUCH FOR THE HELP.
I though I bricked my phone at some point

Categories

Resources