Database Develop

[KERNEL][GPL][P990] ARM. Project | Nightly Build 7 (1-1-13) Happy New Year! Edition

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Dynamic Frequency Mode - Improves Battery Life & Performance
- Added Governors for more options
- Tweaked to the limit for more performance
- Sustained Battery Life while improving Performance
- Added More I/O Schedulers for more options
- Edited/Re-Engineered Hardware modules for more Power Savings
- Overclocking up to 1.5GHz (EXPERIMENTAL. Use at your own risk)
- Overvolting for high performance activities
- Undervolting for Power Saving
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw
=Older Bootloader=
~~~~~~~~~~~~~~
Nightly 1
- Initial build
- Toolchain Fixes
- Added Powersave governor
Nightly 2
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
=Newer Bootloader=
~~~~~~~~~~~~~~
Nightly 3
- Initial Build
- Fixes for Wireless compiling bugs
- Toolchain fixes
- Added Powersave, Hotplug & SmartAssV2 Governors
- Added SIO Scheduler 2012
- Tweaked I/O Schedulers
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
Nightly 4 FINAL
- Added lulzactive governor
- Added 1.5GHz OC
- Add OV Support
- Add UV Support
- Tweaks into drivers
Nightly Plus
- Fixed Zip (Thanks to benee)
- Added some extra modules
- Rebased Sources to fix toolchain related errors
Nightly Build 6
- Reduced OC to 1.3GHz
- Fixed voltage arrays
Nightly Build 7
- Added configs for OC
- Disabled OC for now
v1.00 Golden Master
- Tweaked OC for stability
- Reduce backlight brightness to minimum
- Tweak the DVFS for UV and OV Stability
Click to expand...
Click to collapse
====================
Bugs + CM +
--------
- All CM10 Kernel Bugs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
Vork & Koush, For AnyKernel Flashable Zip
benee for the zip fix
The Other Githubers who I merged commits into source
> XDA Community, Giving comments on whatevers best for implementations
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow by, the ARM architecture used in our phones.)

+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
Bug Reports? Post them here. Please include a logcat and dmesg and a brief situation of what happened visually. Doing this will get your bugs fixed faster.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Troubleshooting?
- WIFI Failure = - WifiModule-ConservativePM-V3.zip -> super conservative on battery, less wifi reception
Download
- WifiModule-NormalPM-V3.zip -> will go in full mode when not asleep, a bit more power hungry, full wifi reception
Download. (Thanks to pengus77)
Link List - CYANOGENMOD BASED (Old Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Nightly1-P990.zip - 5.08 MB [28-12-12]
md5: 7d36e7ac1891345ce89e62326a9979be
ARM-Nightly2-P990.zip - 5.08 MB [28-12-12]
md5: e46c3a8c989d61b67d8a4d2e437a26b9
*NOTE* OLD Bootloader Version will carry on, but each release takes longer than the new bootloader
Link List - CYANOGENMOD BASED (NEW Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-P990-Nightly3.zip - 5.08 MB
md5: d52342cb01a3b60a11cca65a8b208a0a
ARM-P990-Nightly-FINAL.zip - 5.09 MB
md5: 7c4ccf986c9fda2105b6462adcd51487
ARM-P990-NFPlus.zip - 4.78 MB
md5: 580c2e29326ea0b5d016baccffadf7f4
ARM-P990-B6.zip - 4.78 MB
md5: 0f2842812e41b235d6bf14acac2511a3
ARM-P990-B7.zip - 4.78 MB
md5: f3cde8f65bf3e7875f84247799d0e235
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.

Nice to see a singaporean are so gd in it. Gd job Bro

Is it compatible with unlocked new boot loader?
Sent from my LG-P990 using xda app-developers app

oOPS, me forgot to mentionn,
New bootloader version to be released next week.
This is a clean build of the old bootloader, note that only features come in next week.
For the new bootloader, the initial is next week and features come in the following week.
EDIT~
Push the newsworthy thread link now! When we go on the portal news, you get ten times more goodies! Help ARM. develop its potential!

good luck with your arm project sir. cant wait to test for the new bootloader version.

mkchan said:
good luck with your arm project sir. cant wait to test for the new bootloader version.
Click to expand...
Click to collapse
sure!

almost want to go to old BL just to try it =D. sounds erpic!
no testers reported back yet?

If it is not to much for you can you please releas the nightly not only for the new (bl) in the future. also for the old (BL).

Gr8 News, cant wait next week to try the new bootloader version :good:
Thanks for the Hard Work!

Great! Thanks for your work man, tried and seems very good! But the freq of the cpu in interactive gov is always at 1000mhz xD

Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!

nicholaschw said:
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
Click to expand...
Click to collapse
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app

kekks said:
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Its a Kernel. -_-

thanks definitely gonna try it.....working with new bl is the great news.....Thanks....

Me gusta

nicholaschw said:
Its a Kernel. -_-
Click to expand...
Click to collapse
xD
--------------
Well, I don´t know where the 'bug' is coming from, but since the new CM10, notification light isn't working anymore. I'm no kernel developer but I think the issue is there anywhere.
It would just be nice if you maybe could have a look there, as it's a feature, I miss for more then a month now.

With the kernel on the new bootloader my Wifi doesn' t work -.-
Gesendet von meinem LGP990 mit CM10.

Please Read the 2nd OP before posting bugs here.
And, updated OP for WIFI Fix.
Take note, the fix is only for those who get those issues. DON'T Flash unless you get the problem.
Now, If you let me peacefully add more features
Saving up for an O2X!
EDIT
Updated OP for final Nightly.
Next version is the GM. Its the final version before release channel, which will be uploaded to ROM Manager's database.

hi there nicholas, i was just wondering, since this kernel looks very promissing, is there any chance of merging voodoo sound support in the future?

[KERNEL][G800H/HQ] TW & CM TardisKernel 1.5 ULTIMATE edition cpu/gpu OC and tweaks

UPDATE 05/01/2016
Ok another update, havent managed to fix usb forced charge or otg yet but am looking at those, this build has got some interesting features though
Code:
Sound Control Mod to improve sound quality
Init.d Support
ZRAM Enabled, use one of te many apps in play store to activate it.
---------------------------------------------------------------------------------------------------------------------------------------------
MINOR UPDATE 04/01/2016
Only a small bugfix release, trying to fix usb force charge and fix a broken wifi. new build is up now at links below
TW Kernel
CM Kernel
-----------------------------------------------------------------------------------
UPDATE 03/01/2016
Yet another Update folks, this one is small and only adds a couple of things
Code:
Add USB Forced Fast Charging support (google for info)
Add a Build that works on Cyanogenmod also
for each version released (from 1.3) their will be 2 seperate zip files, one will have TW in the name and one will have CM
the TW Version WILL ONLY work on touchwiz roms
and the CM version will work on Cyanogenmod based roms
have tested on CM 12.1 and it works and seems to fix a few bugs aswell apprently
nice short one for today
any questions or requests are welcome and feel free to let others know about these kernels
zips are in the download section or available here :
TW 1.3 Build:
CM 1.3 Build:
--------------------
UPDATE 02/01/2016
New update Released today folks.
new features added
Code:
600mhz GPU Overclock
New I/O Schedulers added
New CPU Governors added
Added a few Different Hotplug drivers to hopefully aid Battery life
Entire kernel is built using the Hyper-Linaro 5.1.1 Toolchain with -O3 and graphite enabled for extra performance and general smoothness
Bit More coding has been worked on for OTG support but this is not working yet if anyone has any ideas or can help with OTG support please contact me as i am a bit stumped on this at moment
download zip file in the downloads tab or from :
currently 1.8ghz seems to be the highest Overclock possible on the cpu as anything more than that fails to boot. still looking into it
any questions or suggestions are welcome
donations are much appreciated also
--------------------------------------------------------
Hello All, and welcome to 2016
got a nice new update for the snapdragon variants of the S5 Mini (g800h/ds/hq etc) and this kernel is as far as im aware quite unique across any device using the msm822x cpu. so you are all going to be part of a very special group for trying this one, that group is going to be the serious overclock group, this kernel overclocks not to 1.6ghz, not to 1.7 ghz but all the way to 1.8 ghz currently, and unless someone can let me know otherwise this is the fastest speed i have seen from a msm8226/8 based device. even the 2nd generation moto g only has a 1.6ghz clock.
changelog overall for this kernel from stock is :
Code:
Boosted Notification LED Brightness as default is quite dim apprently
Added UKSM(Ultra-Kernel Samepage merging) for performance and memory management
added interactive cpu governor
Enabled Fading LED Notification Light
Removed pretty much all debugging junk from kernel as its not needed
switched to linaro 4.9.4 compile with cortex a7 optimization
[strong]1.8Ghz CPU Overclock[strong]
550mhz GPU Overclock
100mhz Base GPU Clock (battery saving FTW)
zzmoove CPU governor
Few different I/O governors including FIOPS and BFQ
SU supported and have disabled samsungs stupid rooting protection
thanks again to sasukesama for testing this one, and again risking his device for it.
check the downloads tab for the files, i have created an update zip aswell as the standard img file and replacement wlan.ko for those who want to do them manually, i HAVE NOT created an odin file for this.
please remember to backup before flashing and i can not promise it will work on your device due to the silicon lottery when it comes to cpus etc.
any questions please feel free to ask
THIS WILL WORK ON TOUCHWIZ 5.1.1 ONLY AT THE MOMENT
XDA:DevDB Information
TardisKernel 1.5, Kernel for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, sasukesama
Source Code: https://github.com/DJSteve/g800h_custom_kernel
Kernel Special Features: Major CPU overclock, performance and powersaving tweaks
Version Information
Status: Testing
Created 2016-01-01
Last Updated 2016-11-20

Download link

luki2411 said:
Download link
Click to expand...
Click to collapse
Up in the download tap

have also added link to the zip file on my dropbox to the first post

1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
mpq.audio.decode=true
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.walkman.enable=1
ro.somc.clearphase.supported=true
persist.service.clearphase.enable=1
setprop htc.audio.global.state=0
htc.audio.lpa.a2dp=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
ro.ril.enable.amr.wideband=1
ro.config.hw_dolby=true
lpa.releaselock=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
dolby.stereospeaker=true
dolby.flag=true
Click to expand...
Click to collapse

I havent looked at gpu oc yet theirs a few things gpu related i want to check out anyway so its next on list
Sent from my SM-G800F using Tapatalk

Ahmetay said:
1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
Click to expand...
Click to collapse
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad

sasukesama said:
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad
Click to expand...
Click to collapse
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential

so ill assume people are having success with this update

Ahmetay said:
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential
Click to expand...
Click to collapse
antutu score:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.

Ahmetay said:
antutu score:
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.
Click to expand...
Click to collapse
Ive used the barebone cleaner
it has some mods to install including the audio boost

new build is now up folks, see first post for changelog and download links

DJ_Steve said:
new build is now up folks, see first post for changelog and download links
Click to expand...
Click to collapse
Thanks its so smoth

luki2411 said:
Thanks its so smoth
Click to expand...
Click to collapse
Great to hear its an actual noticable improvment in smoothness
Sent from my SM-G800F using Tapatalk

Yes it is its fast like newer befor thanks

luki2411 said:
Yes it is its fast like newer befor thanks
Click to expand...
Click to collapse
Your most welcome
i would be interested to know how the battery life has changed with all the tweaks
Sent from my SM-G800F using Tapatalk

It's possible to implement a charger current control?

Vithalvess said:
It's possible to implement a charger current control?
Click to expand...
Click to collapse
I can certainly take a look at adding that
Sent from my SM-G800F using Tapatalk

Does this work on CyanogenMod for g800h ?

Its touchwiz only currently. Suppose ill have to make a version for cm at some point(i actually prefer stock over any form of cm. Cm is too bloated imo now
Sent from my SM-G800F using Tapatalk

[Kernel] AX7Kernel - STOCK B15 / B19

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello!
I want to introduce my first custom kernel for the ZTE Axon 7. This is based of several sources, I cherry-picked commits to make improvements to the stock LOS kernel. I'm not a developer, but i really like to port stuff over .
We'll have two kernels one based off LOS sources and will try to have updated with each and every commit that is submitted and the other one will be Stock ZTE sources based. If you want to request for specific features, let me know and i'll do my best to bring them over.
Special Features:
BLX (Battery Longevity eXtender) added, check Post#2 for instructions.
Updated to lastest LOS Stock Kernel
Added a few governors like: lionfish / despair / darkness / blu_active / wheatley / ironactive and bioshock
added a few IO Schedulers: Tripndroid / Zen / SioPlus / VR
Kcal Color Control driver
USB Fast Charge
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
a little Overclock
Motorola Quickwake
Extended battery charge time from 30s to 100s
and manny other small fixes (you can check the commits in the sources)
Download
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. I am not responsible.... It was the other guy... I swear....
Latest STOCK Release: AX7Kernel-STOCK-R9
Known issues:
02.13.2017 - CPU Freq don't always stick, known issue caused by other drivers. Phone will eventually set your frequencies, dont' panic.
Special Thanks to:
jcadduono
franciscofranco
bedalus
lord_boeffla
flar2
sultanxda
...and many others from whom i cherry pick commits... Sorry if I forgot to mention anyone!
XDA:DevDB Information
AX7Kernel, Kernel for the ZTE Axon 7
Contributors
jimbo77
Source Code: https://github.com/Jimbo77
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2017-03-16
Created 2017-03-17
Last Updated 2017-03-22

Reserved
How to Bypass SafetyNet bootloader and/or root checks
* If comming from a clean flash of ROM or GAPS only do the following:
Magisk Approach
Flash the UnSu file from HERE
Flash my latest Kernel
Flash the latest Magisk from this thread:
Donwload Magisk Manager from the Playstore
Enable Magisk Hide in Magisk Manager
Profit, SafetyNet Checks will pass, all green!
SuperSU Approach
Flash the UnSu file from HERE
Flash my latest Kernel
Flash the latest SuperSU from this thread:
Donwload RootSwitch APP from HERE
Unpack the zip and install the apk inside it
Open Root Switch and disable root
Profit! SafetyNet checks will all be green!
Battery Life Extender (BLX) feature
In order to configure the cap you'll have to navigate to:
Code:
/sys/class/misc/batterylifeextender/charging_cap_level
edit the file and put the cap you want the battery to charge to, i won't recommend setting a cap lower than 90% cause then the phone could abruptely stop a fast charging cycle and damage your battery. If you want to have your phone charging to 100% just put 100 in the file and close it. No need to reboot, just plug and unplug your charger.
On a side note, this value will be set at 97% after every boot. So you'll need to manually change it back to 100.

Reserved
AX7Kernel Changelogs:
AX7Kernel R9 - 03/22/2017
Updated Source with ZTE Changes in B19 source code.
AX7Kernel R8 - 03/17/2017
Fixed NFC issue with B19 builds.
Updated WLAN driver to LA.UM.5.5.r1-03800-8x96.0 github from CAF
Fixed the SDCard error shown in R8 version from 03.16
AX7Kernel R8 - 03/16/2017
Updated to newest B15 Source dropped by ZTE a few days ago. This is mainly a Maintenance Update. Keep in mind the Kernel works with 7.1.1 but it breaks NFC, will be fixes most likely until a new sources is dropped by ZTE.
AX7Kernel R7 - 03/16/2017
For both STOCK and LOS Based versions. Upstream Linux Kernel to 3.18.45 thanks to jcadduono patches.
AX7Kernel R6 - 03/03/2017
Cap for battery charging set back to 100% by deffault. BLX Settings, you want to change them, refer to this POST and to this POST. If you want to extend your battery's life think about adding the cap to a 95 or 97%
Fixed the issue where the phone won't go into deep sleep at all.
WQ_POWER_EFFICIENT MODE is enabled by default now.
AX7Kernel R5 - 03/01/2017
Cap for battery charging set to 97% by deffault. BLX Settings, you want to change them, refer to this POST and to this POST. Your battery won't charge beyond 97%.
Added options to manipulate thermal settings, now you can choose when the phone will throtle the CPU or when to start shutting down cores to prevent damage. My recommendation don't push it too high or your phone might get damaged due to the high temps. It's not set to 60 Celcius so i recommend lowering that to avoid damage.
Added WQ_POWER_EFFICIENT MODE ( you'll need EX Kernel manager to get this, it's paid app but it's totally worth it guys)
Enabled the option to 'disable' some wakelocks. Disable them on your own risk. Wakelocks that can be disabled are: Bluedroid, wlan_rx, wlan_ctrl, wlan, IPA_WS, wlan_extscan_wl_ws, qcom_rx_wakelock_ws - You'll also need EX Kernel manager to get this options.
AX7Kernel R4 - 02/24/2017
Renamed both the Folder and Kernel zip file to appoint to the version. Now we'll have 2 versions, LOS and Stock AX7Kernel, make sure to check the zip name correctly to avoid issues when cross flashing kernels. All LOS/RR/AOKP and other LOS Based kernels will have the word LOS in it.
Fixed BLX feature. It should now properly stop the charging process when the battery has reached the cap_level set by users. Charge will resume once the charge drops from the cap assigned.
AX7Kernel R3 - 02/21/2017
Added one more step of OC (pushed just a little bit further)
Added my own and really simple implementation of BLX (battery life extender) based on the work made by bedalus for the OP3 and OP3T
AX7Kernel R2.3 - 02/17/2017
Updated to latest LOS Stock Kernel
Disabled some debugging
fixes to ZEN ioScheduler - highly recommended now.
Disabled color inversion in Kcal - can't be used anyways.
Fixed USB Fast Charge - Should worl properly now.
GPU OverClock - 684MHZ max frequency now.
Adreno Boost added and enabled (should boost GPU a bit)
Updates to interactive governor (should work better when operation are in the background and screen is off - music streaming is an example.
Changes to the Sync
Changes to Random function for IO ops.
Updates to Zram.
AX7Kernel R1 - 02/13/2017:
Updated to latest LOS Stock Kernel
Added a few governors like: lionfish / despair / darkness / blu_active / wheatley / ironactive and bioshock
added a few IO Schedulers: Tripndroid / Zen / SioPlus / VR
Kcal Color Control driver
USB Fast Charge
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
a little Overclock
Motorola Quickwake
Extended battery charge time from 30s to 100s

Link will still redirect to R7 , androidfilehost is conducting a server maintenance. Once completed I'll upload R8 to the usual file location!
EDIT: STOCK R8 has been uploaded. Again, keep in mind this release is not fully compatible with 7.1.1 it breaks NFC, until we get an updated source it will remain as is.
Happy Flashing!

jimbo77 said:
Link will still redirect to R7 , androidfilehost is conducting a server maintenance. Once completed I'll upload R8 to the usual file location!
EDIT: STOCK R8 has been uploaded. Again, keep in mind this release is not fully compatible with 7.1.1 it breaks NFC, until we get an updated source it will remain as is.
Happy Flashing!
Click to expand...
Click to collapse
Sorry, no download file as of 4:49PDT

amphi66 said:
Sorry, no download file as of 4:49PDT
Click to expand...
Click to collapse
Yeah i'm sorry, i had to take it down. Forgot to add the exfat module and that breaks SDCard support. Will work on this tomorrow morning and will reupload then. For now R7 is there

So this is a kernel for the stock firmware?? I have b19 unfortunately so I can't test, 1 thing I surely want you to add on the b19 version if you make one, aside from all these cool features is f2fs support please make it happen.

Sebastian Fox said:
So this is a kernel for the stock firmware?? I have b19 unfortunately so I can't test, 1 thing I surely want you to add on the b19 version if you make one, aside from all these cool features is f2fs support please make it happen.
Click to expand...
Click to collapse
This works for the B19, only issue is that it breaks NFC. Other than that it works great

jimbo77 said:
This works for the B19, only issue is that it breaks NFC. Other than that it works great
Click to expand...
Click to collapse
I'll give it a try as well as freeza kernel, let's see about f2fs

Sebastian Fox said:
I'll give it a try as well as freeza kernel, let's see about f2fs
Click to expand...
Click to collapse
F2fs is not yet included. I'll see about it this weekend or next week

jimbo77 said:
F2fs is not yet included. I'll see about it this weekend or next week
Click to expand...
Click to collapse
Dang it >_> then freeza is my only solution for now
In case if you're interested about why I'm asking for f2fs, I am doing so to dualboot my stock b19 using @sbr method , unfortunately stock is ext4 and secondary can't be f2fs because it takes part in data, both either have to be f2fs or ext4
it's a bit complicated >_>

jimbo77 said:
F2fs is not yet included. I'll see about it this weekend or next week
Click to expand...
Click to collapse
Why is f2fs so important to people. Back in the day, yes, it was an improvement in speed. Now, with today's storage speeds, it's performance is negligible yet people still demand for it. Doesn't it just complaints things now?
Sent from my ZTE A2017U using Tapatalk

osmosizzz said:
Why is f2fs so important to people. Back in the day, yes, it was an improvement in speed. Now, with today's storage speeds, it's performance is negligible yet people still demand for it. Doesn't it just complaints things now?
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Exactly what I was thinking too.

Feeling the same. It won't hurt to have support tough. I'll try to add it but I'm afraid it could break the anykernel aprox ah since the support needs to be added Ramdisk wise and for that I'll need to move away from the current kernel approach.
I'll take a look at the lazy flasher scripts from jcadduono to check if I can patch whatever Ramdisk user has

Finished the R8 build... It was a PITA to fix find the fix for SDCARD issue (it was kinda silly what was breaking it lol). Also updated WLAN driver to CAF LA.UM.5.5.r1-03800-8x96.0 version published yesterday and fixed the damn NFC in 7.1.1 builds (this most likely break NFC in 7.0 builds). I'm sorry if you are still in 7.0 and need NFC, move on! ..
I'll push the update once android file host is out of maintenance (around 30 mins from now).
As to F2FS i have enabled the driver in the kernel and stock ramdisk supports data as F2FS so i'm assuming it should work. Although i don't use so if it doesn't i won't fix it
EDIT: LINK IS UP!

I'm not sure if I'm just blind, but I cannot find the link anywhere
EDIT: The file is there, found it in AFH over LOS version's thread. It's here: link removed
EDIT 2: Ok apparently it's in OP and I am blind...

Borias said:
I'm not sure if I'm just blind, but I cannot find the link anywhere
EDIT: The file is there, found it in AFH over LOS version's thread. It's here: link removed
EDIT 2: Ok apparently it's in OP and I am blind...
Click to expand...
Click to collapse
LOL. That's what I was gonna say haha I'm glad you find it

sorry if this is the wrong place to ask but, where can i find the stock kernel that comes with the phone?

pookachee said:
sorry if this is the wrong place to ask but, where can i find the stock kernel that comes with the phone?
Click to expand...
Click to collapse
Download the bootstack of the firmware you have and flash it.
https://forum.xda-developers.com/ax...de-updates-to-stock-files-via-t3469484/page53

So does the stock version suffer from video playback issue like freeza's kernal?

Recompiled & Optimized Werewolf Kernel [SM-T211]

Hi!
I was looking through @laufersteppenwolf's kernel source and noticed it was compiled with -Os flag and an old toolchain. I decided to recompile it with graphite and -Ofast flags (the highest optimization level) and with a newer toolchain. Though the later failed (All builds with 4.9+ toolchains failed to boot on this device ) it still feels faster than the original build. I have also disabled some debugging options so that the kernel would fit in the boot partition in addition to some performance gain.
Features
Compiled with graphite and -Ofast flags (linaro 4.7.4)
Undervolted Wi-Fi, Vibration, LCD and Touch by 10% (Not sure if they're effective or not)
Disabled some debugging options
Added a lower charging current level (1700mA) to fast charge options (To reduce heating during charge but must be selected by user, Default is 1800)
Download
laufersteppenwolf said:
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Click to expand...
Click to collapse
XDA:DevDB Information
Recompiled Werewolf SM-T211, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
mat1371
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2018-08-23
Last Updated 2018-08-23

Reserved
Tweaking Guide
laufersteppenwolf said:
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
Click to expand...
Click to collapse

mat1371 said:
Hi!
I was looking through @laufersteppenwolf's kernel source and noticed it was compiled with -Os flag and an old toolchain. I decided to recompile it with graphite and -Ofast flags (the highest optimization level) and with a newer toolchain. Though the later failed (All builds with 4.9+ toolchains failed to boot on this device ) it still feels faster than the original build. I have also disabled some debugging options so that the kernel would fit in the boot partition in addition to some performance gain.
Features
Compiled with graphite and -Ofast flags (linaro 4.7.4)
Undervolted Wi-Fi, Vibration, LCD and Touch by 10% (Not sure if they're effective or not)
Disabled some debugging options
Added a lower charging current level (1700mA) to fast charge options (To reduce heating during charge but must be selected by user, Default is 1800)
Download
XDA:DevDB Information
Recompiled Werewolf SM-T211, ROM for the Samsung Galaxy Tab 3 7.0
Contributors
mat1371
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2018-08-23
Last Updated 2018-08-23
Click to expand...
Click to collapse
Great! Did you upload your source?
I had been working on it to compile with GCC 8, but haven't got enough time to complete the cherry picks

sscsps said:
Great! Did you upload your source?
I had been working on it to compile with GCC 8, but haven't got enough time to complete the cherry picks
Click to expand...
Click to collapse
It's on github but I didn't link to it cause it's messy. BTW There is no source code change aside from makefile and defconfig.

BTW, that link is blocked in India, can you upload it somewhere else? and also, cna you provide link to your source?

sscsps said:
BTW, that link is blocked in India, can you upload it somewhere else? and also, cna you provide link to your source?
Click to expand...
Click to collapse
Use https:// in download link.

adukale said:
Use https:// in download link.
Click to expand...
Click to collapse
Well, I've got it already, and https didn't quite help, her to use a VPN,
I'm suggesting the OP to upload somewhere else as well.

Thx alot, now it's time to download kitkat rom.
Keep it up sir ?

sscsps said:
BTW, that link is blocked in India, can you upload it somewhere else? and also, cna you provide link to your source?
Click to expand...
Click to collapse
Sorry for late reply, I'm busy with my thesis these days. I've attached the file to the post. Will send you a link to the source (GitHub) in your PV.

Great! Finally something new for T211/0. Love to see some movement here.

Tried installing on a T210 with TRWP but get an error message. Anyone any ideas?
Tried to attach the error but it won't let me... Error talks about asset failed getprop ro.product.device == lt023g etc

@Samw13
SM-T210 = lt02 wifi Tab
SM- T211 = lt02_3g Tab

So, i have deleted requirement in update-script file and kernel seems to work correctly on t210.
Here's link to edited kernel: https://www.upload.ee/files/10238882/kernel-SM-T210-werewolf-Ofast-UV.zip.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is it fully stable on SM-T211??. Is it the final version??

Hi,
@mat1371,
@lol28
Thank you for the kernel for T210R. Stable, overclocked to 1.42Ghz. I have an issue with the settings I make, they don't stick after reboot. I used kernel adiutor, EX kernel manager, Performance tweaker. I have busybox installed.
I've flashed Powerdaemon.disable.zip from Gr8nole, still the same.
Edit:
I've found Gr8nole's suggestion about deleting /system/bin/phservice. I deleted the file, rebooted, changed to governor to lionheart. It seemed to keep the settings.
Thanks!

[KERNEL] [blu_spark r218 OP8/Pro/T] [A13 Custom]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker + IAS)
Full -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
Less is more: stockish OP8 builds based on OnePlusOSS/android_kernel_oneplus_sm8250 for max stability
Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes for important subsystems
Modded schedutil governor merged from latest CAF sm8250 patchset
No OC, use 250HZ base timer frequency
msm_performance touchboost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default, BBR available), Network tweaks and updated drivers
Several I/O control tweaks, added schedulers ZEN v2 is default, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
ZRAM Swap (LZ4 default) and with file disabled, LZO-RLE and ZSTD are available
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and general improvements for GPU driver
adrenoboost ready (disabled by default)
Backlight min brightness and backlight scale option
Gamepad support enabled (xbox, ps4, switch)
USB Fast Charge (USB mode up to 900mA with MTP on)
FS fsync toggle on/off
Wakelock blockers available
wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
Compatible with Kernel Adiutor, EXKM, FKM and others
DOWNLOAD KERNEL ZIP
FKM download configs: oos | custom
(No mirrors please)​
Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
If you come from other kernel or have any issues, you should restore your stock boot.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
If you are upgrading between blu_spark versions, just flash the kernel zip.
About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
If you're using custom ROMs (including stock based ones) and OOS Open Betas you're much on your own. I'm mostly interested on debugging stuff in stock and stable OOS.
Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
Source Code: https://github.com/engstk/op8
Don't forget to hit thanks, it's free
OnePlus 8 Pro development unit donated by OnePlus. Big shouts to them
Very proud of being on the OnePlus Developer Program, special thanks to dev relations team.

blu_spark r12 release
All right crew!
It's that time again, 1st build is up :highfive:
This kernel source is unified for OP8/Pro, don't know how it will run in the regular model (can only test in the Pro). Let me know.
At the moment we're maybe at 80% of the usual goodies, get a nice and stable base and go from there.
I'm building with clang currently got some hiccups with gcc. I'll probably revisit this in the future but it will need more TLC.
You can now use FKM download kernel feature, just import the links bellow in the app :highfive:
blu_spark_r12release
FKM download configs: oos | custom
Build with latest Google Clang version 11.0.2 (Android 11) - blu_gcc may come in the future, needs som TLC
Synchronize codes for OnePlus 8 Oxygen OS 10.5.9.IN21AA and OnePlus 8 Pro Oxygen OS 10.5.10.IN11AA
Build errors and warnings fixes
Compiling improving and target optimizations
Goodies: IO and filesystem stuff, priorities and UX, touchboost, zram, wakelock blocker, haptic and gestures level, adrenoboost, etc
wireguard updates (v1.0.20200611)
init adjust for sdm8250
AnyKernel3 latest updates
For root, stable Magisk 20.4 or newer is mandatory
Click to expand...
Click to collapse
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free

ur kernel is great for daily use when I have 6t, it's fast, smoot, and stable. do u plan to build one for oneplus 8?

Great to see your blu-spark here! Kudos

Great job! Any list of the best settings to activate for your kernel in FKM? Can't manage to activate westwood TCP method, it gets stuck to reno, for example. Or any config file to have the best settings selected, maybe? Sorry, I'm not too familiar with FKM yet.

Hey there, welcome. Nice to see you here.
Just one question, why are so many features listed in the OP and many or most not in the sources on GitHub? Isn't this a copy paste error?
Sent from my Pixel 4 XL using Tapatalk

orochi9999 said:
ur kernel is great for daily use when I have 6t, it's fast, smoot, and stable. do u plan to build one for oneplus 8?
Click to expand...
Click to collapse
Has it is doesn't work? idk.
At the moment I'm focused on the bringup.
Surfeur-des-Reves said:
Great job! Any list of the best settings to activate for your kernel in FKM? Can't manage to activate westwood TCP method, it gets stuck to reno, for example. Or any config file to have the best settings selected, maybe? Sorry, I'm not too familiar with FKM yet.
Click to expand...
Click to collapse
I already inject settings I see importanton the background. TCP method is westwood by default, that reno situation is a bug from the app, franco is on it :good:
tbalden said:
Hey there, welcome. Nice to see you here.
Just one question, why are so many features listed in the OP and many or most not in the sources on GitHub? Isn't this a copy paste error?
Sent from my Pixel 4 XL using Tapatalk
Click to expand...
Click to collapse
Hey. WIP and will come soon after.

eng.stk said:
Hey. WIP and will come soon after.
Click to expand...
Click to collapse
great to see ya here mate... i just got my pro... will teat ince i feel like rooting lol

eng.stk said:
Has it is doesn't work? idk.
At the moment I'm focused on the bringup.
I already inject settings I see importanton the background. TCP method is westwood by default, that reno situation is a bug from the app, franco is on it :good:
Hey. WIP and will come soon after.
Click to expand...
Click to collapse
it's not working on regular 8

After installing this kernel I'm getting an option to boost GPU clock to 900 MHz. This also resulted in a much higher compute score. Is this normal? @eng.stk

On8 not working

Cool to see another old kernel dev from the nexus 5 days xD

orochi9999 said:
it's not working on regular 8
Click to expand...
Click to collapse
Smturbo said:
On8 not working
Click to expand...
Click to collapse
Hum too bad. Seems like there's driver differences between the models, we'll see what can be done ib the future.
For now I'll concentrate on the pro.
akshat207 said:
After installing this kernel I'm getting an option to boost GPU clock to 900 MHz. This also resulted in a much higher compute score. Is this normal? @eng.stk
Click to expand...
Click to collapse
Wait, what? Seem like that app is on acid lol
Sent from my blu_spark'd OnePlus

kevp75 said:
great to see ya here mate... i just got my pro... will teat ince i feel like rooting lol
Click to expand...
Click to collapse
hjjiang said:
Cool to see another old kernel dev from the nexus 5 days xD
Click to expand...
Click to collapse
Welcome guys, nice device choices [emoji16]
Sent from my blu_spark'd OnePlus

eng.stk said:
Wait, what? Seem like that app is on acid lol
Sent from my blu_spark'd OnePlus
Click to expand...
Click to collapse
Then how did I get 4351 OpenCL score on Geekbench lol?

akshat207 said:
Then how did I get 4351 OpenCL score on Geekbench lol?
Click to expand...
Click to collapse
You probably still have custom dtb from the kernel that have gpu oc, since this kernel doesn't replace the dtb and you switched kernels without keeping that in mind you ended up with mixed kernel images and dtbs.

acuicultor said:
You probably still have custom dtb from the kernel that have gpu oc since this kernel doesn't replace the dtb and you switched kernels without keeping that in mind you ended up with mixed kernel images and dtbs.
Click to expand...
Click to collapse
So, how is that much GPU OC possible? that's almost double the stock max frequency!
EDIT: You were right, it was from "Evira Kernel". Now my question is, is that much OC safe? That's insane.
Do note that my device didn't get hot when I was running the benchmark even at 900 MHz.

Smturbo said:
On8 not working
Click to expand...
Click to collapse
what was the problem for the regular OnePlus 8? bootloop and what region was ur phone

hjjiang said:
what was the problem for the regular OnePlus 8? bootloop and what region was ur phone
Click to expand...
Click to collapse
At the bootloader unlock screen, after a few seconds, the text turns green and has black lines through it, when it finishes booting, by the screen goes completely black. Vibration and sound still work though. Have to force power off and back to TWRP to restore stock boot.

blu_spark r18 release
All right crew!
New build is up :highfive:
This kernel is only tested for the Pro variant which I have, regular OP8 support may come in the future.
You can now use FKM download kernel feature, just import the links bellow in the app :highfive:
blu_spark_r18 release
FKM download configs: oos | custom wip
Full LLVM tools build (Clang + LLD), add a couple build fixes/improvements
drivers: misc: power: implement usb2 fast charge mode
power: smb5-lib: reset level on removal
drm-msm-dsi: add backlight min option
fs: exfat: version 2.2.0-3arter97
cpufreq: schedutil: make iowait boost optional
remove and disable some debug and logging
defconfig: enable overlay and disable dtb append
init adjustments
For root, stable Magisk 20.4 or newer is mandatory
Click to expand...
Click to collapse
Keep in mind: I will give no active support for custom ROMs (including OOS based ones).
I am only interested on debugging stuff in stock and stable OOS (with logs and reproducible steps to replicate the issue).
Don't spam this thread with LOS or other ROMs stuff like "this don't work, my app doesn't open, etc" or debugging features.
Also don't go spam and bug reporting on ROM threads if using this.
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free