Database Develop

How to remove (live)wallpaper

I can't find a thread for this, but how would I delete stock wallpapers or stock live wallpapers. I prefer to pick and choose which ones to remove to try and save a little space.
I have a rooted N1 with Cyan's mod. I'm comfortable using ADB, just don't know the proper commands, locations of wallpapers or names of specific files.

Me too. want to know where the files are located.

Me three. I've searched around in nearly every directory and cannot find them. I would like to remove the stock htc wallpapers to save space.

adb shell rm /system/app/LiveWallpapers.apk
adb shell rm -r /data/data/com.android.wallpaper
adb uninstall com.android.wallpaper
adb shell rm /system/app/MagicSmokeWallpapers.apk
adb shell rm -r /data/data/com.android.magicsmoke
adb shell rm /system/app/VisualizationWallpapers.apk
adb shell rm -r /data/data/com.android.VisualizationWallpaper
adb uninstall com.android.VisualizationWallpaper
adb shell rm /system/app/Mode10Wallpapers.apk
LiveWallpapers.apk = contains nexus and water live wallpaper and some other i cant remember
wallpapers are located inside of /system/framework/framework-res.apk and does require slight knowledge of how to edit framework files

hey i follow the first adb then i got this (?) then no go???what i need to do after (?)

vinny.1967 said:
hey i follow the first adb then i got this (?) then no go???what i need to do after (?)
Click to expand...
Click to collapse
Check if ur phone is detected by adb (adb devices). Then do an adb remount and the run the above adb commands

My device is detected but i try to put in the above commands I it says that its a read-only file system.

Static wallpapers (except the single default wallpaper) are stored in your launcher or in CM6 or Kang-o-rama a special wallpapers app.
It's much easier to download ES File Explorer, turn on root functions, mount system as read/write (same menu) and selectively delete the files you want from /system/app/ and /data/data/ as above.
But really, you're not going to save any user space as all because, for the most part, you're deleting stuff from /system which you don't otherwise need space on.

How to replace launcher.apk in system folder

I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.

you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**

Well theres 2 types of home replacements.
1. Who allow themselves to replace stock launcher
2. Who dont allow and have to be used as stand-alone
Regardless ur cleanest method would be :
adb remount
adb shell rm /system/app/Launcher.apk
adb uninstall com.android.launcher
adb shell rm /data/dalvik-cache/*Launcher*
adb shell rm /cache/dalvik-cache/*Launcher*
Now just place ur favorite launcher in ur /system/app folder.
adb remount
adb push <drag apk here> /system/app/
Now just reboot ur phone

traumatism said:
you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**
Click to expand...
Click to collapse
I did this for my hero and it works, thanks man

thanks a lot

traumatism said:
you may be able to do this through terminal too.
ive not found a tutorial on this specific application but it can be done.
Try this
1. su (allows root permission)
2. mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (make the system folder writeable)
3. cat /system/app/.apk > /sdcard/launcherbackup.apk (backs up system launcher)
4. cat /sdcard/(launcher name).apk > /system/app/launcher.apk (copies launcher to system)
5. enjoy
**PLEASE NOTE**
I am not responsible for if this fails. i have yet to try it myself as i find no need. the code was taken from another tutorial but so far has yet to fail to work for me on other aspects
**PLEASE NOTE**
Click to expand...
Click to collapse
can i replace stock by any other launcher by this method???

You can use Link2sd app to convert an app (launcher from market) to system app, then reboot your device and then disable stock launcher in settings or freeze it with link2sd.
I still find having stock launcher there, in case something is wrong with an update, very useful, so I wouldn't even freeze the stock launcher.
Edit: obviously, root required, but its not like you didn't know that from the beginning.
Sent from my Nexus 7 using xda app-developers app

Daneshm90 said:
Well theres 2 types of home replacements.
1. Who allow themselves to replace stock launcher
2. Who dont allow and have to be used as stand-alone
Regardless ur cleanest method would be :
adb remount
adb shell rm /system/app/Launcher.apk
adb uninstall com.android.launcher
adb shell rm /data/dalvik-cache/*Launcher*
adb shell rm /cache/dalvik-cache/*Launcher*
Now just place ur favorite launcher in ur /system/app folder.
adb remount
adb push <drag apk here> /system/app/
Now just reboot ur phone
Click to expand...
Click to collapse
Wow I replaced my stock by holo launcher!!! Working fine
Thaknk you

bkrill said:
I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.
Click to expand...
Click to collapse
The best n easiest way wud b usin a root browser.
Firstly root ur mob n download a file manager that can browse root folder such as root explorer.
Copy the launcher.apk file from ur sd card n paste it to system/app folder aftr activating r/w setting n set permissions to rw-r-r.
N then move the stocklauncher.apk to ur sd card.
For samsung gb mobs stock launcher is touchwiz30launcher.apk
Try to do tings in simple ways.
Sent from my GT-S5302 using xda app-developers app

Whatsapp problems
Hey guys,
The 4.4 KitKat Rom is working just fine. But I ran into some problems with Whatsapp. I successfully validated my phone number and restored my old messages. Now the problem is that Whatsapp won't recognize my contact numbers? When I press on the "New Conversation" button my friendlist should appear but it doesn't. Then I tried refreshing the list by pressing on menu and refresh. Then he tells me "Please try again later".
Has anybody got the same issues? Or any ideas?
Thanks

Ochs said:
Hey guys,
The 4.4 KitKat Rom is working just fine. But I ran into some problems with Whatsapp. I successfully validated my phone number and restored my old messages. Now the problem is that Whatsapp won't recognize my contact numbers? When I press on the "New Conversation" button my friendlist should appear but it doesn't. Then I tried refreshing the list by pressing on menu and refresh. Then he tells me "Please try again later".
Has anybody got the same issues? Or any ideas?
Thanks
Click to expand...
Click to collapse
theres no issue if change stock launcher only i think

bkrill said:
I'm looking to replace the launcher.apk in the /system/app folder. I know i could just download a replacement launcher from the market and use that but whenever i do that my phone seems to slow down considerably.
So what i'm hoping is that somebody can tell me the adb commands to use to remove the Launcher.apk from the system/app folder and replace it with my choice of launcher? If you know how please reply with the exact commands. Telling me to use adb uninstall will not help seeing as how i've already tried and it didn't work
Please do not tell me to go read adb for dummies or an adb command guide cause i have tried to use these and the commands i type in never work.
Please do not tell me to use the search button as i have and noone seems to have asked this question yet.
If it's not possible just say so.
Click to expand...
Click to collapse
Another suggestion guys.......note: dont ever uninstall the previous launcher yet...this result a crash...just do this first...your phone should be rooted try Link2SD app from playstore just scroll down and move app to phone and then the upper right corner you'll see the menu then convert to system app...and upper left corner then reboot....100% is working.....by arowenayih

Bootscreens/Bootanimations by Synaptyc

I have made bunches of Bootanimations & Bootscreens in the past.
I will list them here.
Note: some are good ... some are bad.
But you can find anything I make in this thread.
What is the difference between bootscreen and bootanimation? (Both produce an animation upon boot.)
BOOTANIMATION
resides in the "/data/local/" or /system/media/" folder on your phone
is made up of individual picture files and strung together upon boot to make an animation
does not read any audio file therefore doesn't have sound upon boot
BOOTSCREEN
resides in the "/system/media/bootscreen/" folder on your phone
is made up of a animated GIF file and played as an animation upon boot.
plays an mp3 file to add audio to the animation (but only works on certain ROM's. I use them with xtrROM & xtrSENSE ROM's and have no issues. other ROM's may not support them)
NOTE: both should not be on your device at the same time, or it will only play the bootanimation and never the bootscreen
Helpful links
********************************************
Custom Boot Animation Gallery {No root Needed}
[HOW-TO]--Stock Bootscreen w/ Sound
Animations
********************************************
CLICK A PICTURE AND GO TO THAT ANIMATIONS POST
DroidX
Andy Colors
xtrROM & xtrSENSE
Andy Does
Sylock
Droid Eye
3D Plasma
Plasma RGB
Wait Circle
Unstable Core
Andy Colors V2
Loading System Check: Blue
Loading System Check: xtrROM & xtrSENSE
Andy Power Black and Colors
Loading Semicircles
B&W
portrait_________landscape
Red
...coming soon
Green
...coming soon
Blue
Pink
R2-D2 with sound!
Preview Bootanimation on phone while in Android!
1) Install GScript Lite from the app market
2) Create a script called "Bootanimation"
3) Make sure "Needs SU?" is checked
4) In the bottom field type:
Code:
TIMEOUT=20
( bootanimation & sleep $TIMEOUT; kill $! 2>/dev/null )
The TIMEOUT is in seconds and can be changed as you like.
*** this code was contributed by Arabia ***
5) Save the script
6) Click on the Bootanimation script you just created. Let the animation run all the way through until the script ends returning you to the GScript app.
7) Show off your bootanimation whenever you want =)
Helpful files
********************************************
Here are a few BATCH files I use to swap BootAnimations and BootScreens.
(you are responsible for backing up any animations you want to keep before running any of these batch files)
Just make a TEXT file and save it as "whatever.bat"
RemoveAnimations.bat
Code:
:: this batch file will remove ANY bootscreen or bootanimation on the device
:: ***make sure you backup any that you want to keep***
@echo on
path=C:\android-sdk-windows\tools
adb remount
adb shell rm /system/media/bootscreen/*.*
adb shell rm /system/media/bootanimation.zip
adb shell rm /data/local/bootanimation.zip
Preview.bat
Code:
:: connect your phone to your PC and select Charge Only or HTC Sync
:: This batch file will demo the bootscreen/bootanimation on your phone
@echo on
path=C:\Android-SDK-windows\tools
adb shell bootanimation
ADBWireless.bat
Code:
:: Sets the PATH for ADB and enables ADB Wireless. Launch the APK on the phone first.
@echo off
path=c:\android-sdk-windows\tools
adb connect 192.168.1.5:5555
BootanimationRemovePushPreview.bat
Code:
:: connect your phone to your PC and select Charge Only or HTC Sync or install "ADB Wireless".
@echo on
:: Sets the PATH for ADB.
path=C:\android-sdk-windows\tools
:: Enables "adbWireless". Launch the app on your phone first.
adb connect 192.168.1.5:5555
:: Remove ANY bootscreen or bootanimation on the device.
:: ***make sure you backup any that you want to keep***
adb remount
adb shell rm /system/media/bootscreen/*.*
adb shell rm /system/media/bootanimation.zip
adb shell rm /data/local/bootanimation.zip
:: Install the bootanimation on your phone and preview it.
adb push bootanimation.zip /data/local/
adb shell bootanimation
BootscreenRemovePushPreview.bat
Code:
:: connect your phone to your PC and select Charge Only or HTC Sync or install "ADB Wireless".
@echo on
:: Sets the PATH for ADB.
path=C:\android-sdk-windows\tools
:: Enables "adbWireless". Launch the app on your phone first.
adb connect 192.168.1.5:5555
:: Remove ANY bootscreen or bootanimation on the device.
:: ***make sure you backup any that you want to keep***
adb remount
adb shell rm /system/media/bootscreen/*.*
adb shell rm /system/media/bootanimation.zip
adb shell rm /data/local/bootanimation.zip
:: Copies the 5 bootscreen files to your phone and previews the bootscreen.
adb push .DS_Store /system/media/bootscreen
adb push boot1.gif /system/media/bootscreen
adb push boot2.gif /system/media/bootscreen
adb push droid.mp3 /system/media/bootscreen
adb push boot_animation.xml /system/media/bootscreen
adb shell bootanimation

Droid X Bootanimation
Resized to 320x480
Original
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Inverted
Retro
Retro Inverted
OldPhoto
OldPhoto Inverted

Andy Colors
Andy Colors
bootanimation & bootscreen

Bootscreen/Bootanimation for xtrROM & xtrSENSE
This is an animation I made for the xtrROM & xtrSENSE roms
I made 2 versions of this one.
A BootAnimation and a BootScreen (with sound)
As always, the actual animation is sized for the Eris and much better quality and frame rate.

whoa.. these are nice ima try some

Andy Does
Andy Does
BootAnimation & BootScreen with the "Oh Yeah" sound from Ferris Bueller's Day Off

Sylock animations
Sylock bootanimations
The speed and graphics quality of the animated GIF's is very low compared to the animation on your phone.
They are much faster and prettier.
Sylock Red
Sylock Blue
I may add the DROID intro and sound to these.

Droid Eye
I saw this commercial for the Droid X and decided to rip it to a bootanimation.
Sized for our Droid Eris @ 480x320.
View this one in landscape.
Main ______________________________Loop

3D Plasma
*** 3D Plasma ***
Yep... break out your red and blue 3D glasses for this round
(again, the frame rate and quality are much better than these GIF's)
Blue on Red
Main_______________________Loop
Red on Blue
Main_______________________Loop

Plasma RGB
Plasma RGB
with or without sound

Wait Circle animation
Wait Circle animation
Very simple and small.
The default 'desc.txt' file is:
Code:
320 480 12
p 1 0 main
p 0 0 loop
These look great at half size also (like this):
Code:
160 240 12
p 1 0 main
p 0 0 loop
The frame rate looks best at 8, 12, or 16.
*** I also ported this to a BOOTSCREEN (all 3 versions are in one zip file) ***

New Animation
I came across this animation but it was for the Droid. Can you get it to work for the eris? also, can you format it to run vertically so that it takes up the whole screen? the file is included. thanks for the time.

Unstable Core
DroidEris1981 said:
I came across this animation but it was for the Droid. Can you get it to work for the eris? also, can you format it to run vertically so that it takes up the whole screen? the file is included. thanks for the time.
Click to expand...
Click to collapse
Here ya go!
Resized to 320x480
turned to landscape view
added "DROID" sound
(frame rate and image quality are much better)

Andy Colors V2
Andy Colors V2
bootanimation & bootscreen w/sound

how about this one?
http://www.youtube.com/watch?v=ZBuhqzseFN4&feature=related

Funnyface19 said:
how about this one?
http://www.youtube.com/watch?v=ZBuhqzseFN4&feature=related
Click to expand...
Click to collapse
LOVE IT!
I will convert this one later tonight or tomorrow morning for sure. Check back then.

Noob Q alert
Do we just flash in recovery?

TheDoctor1177 said:
Do we just flash in recovery?
Click to expand...
Click to collapse
no. all of mine are meant to be pushed VIA adb. Check the "helpful links" the first post in this thread for more education about bootanimations and bootscreens.

Thanks man! These boot screens are awesome!!

REALLY close to being done with the "LOADING SCREEN" bootanimation.
I have to take a break to pickup my daughter from school =)
Be back in a bit and I will upload the finished product.
Check back in a couple hours.

[THEMEING]with[GUIDES]and[MIRRORS] for TizenMod (updated 16/04/22)

ANYTHING YOU FLASH FROM HERE YOUR DOING SO AT YOUR OWN RISK
AND DOING SO VOIDS YOUR WARRANTY
I WILL TAKE NO RESPONSIBILITY FOR ANY ERRORS YOU MAY HAVE
SEE GUIDES POST BELOW FOR INFO ON FLASHING ANYTHING HERE
<<<< ALL DOWNLOADS AND ROM MIRRORS >>>>
<<<< NOW IN ONE PLACE,AT THE BOTTOM OF THIS POST >>>>
<<<< BROWSE INSIDE EACH LINK TO FIND WHAT YOU WANT >>>>
THEMEING
Icon Packs
icon packs (complete stock icons-for now)
TIZEN LOVE ICONS
Thanks to KASHORTIEXDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GALAXY S5 ICONS
ROUNDED S5 ICONS
Thanks to KASHORTIEXDA
CYANOGENMOD ICONS
BLUE
THIN BLUE BLACK BG
BLUE TRANSPARENT BG
BLUE BLACK BG
THIN BLUE TRANSPARENT BG
]BLUE THIN BORDER
RED
THIN RED BLACK BG
RED BLACK BG
RED TRANSPARENT BG
THIN RED TRANSPARENT BG
RED EXPLOSION
RED THIN BORDER
GREYSCALE
IOS ICONS
thanks to ANDROID_2013
COLOUR
IOS ICONS
thanks to ANDROID_2013
SEE ATTACHMENTS BELOW FOR ICON PACKS
......................................................................................................................................
wallpapers
also available - individually or as wallpaper packs
CYAN converted wallpapers coming soon
more to come soon.......
tell me what you want and il make it happen.........
......................................................................................................................................
BOOT/SHUTDOWN ANIMATIONS
stock samsung
The Simpsons Intro
R2D2 boot
R2D2 shutdown
tizen mod android popping
android with tizen chest spinning
more coming soon
......................................................................................................................................
RINGTONES, NOTIFICATIONS,ALARMS, OTHER SOUNDS
GOOGLE EDITION SOUNDS
CM10.2 SOUNDS
IOS7 SOUNDS
HTC SENSE SOUNDS
......................................................................................................................................
FONTS
TIZEN SANS FONTS
22,385 .TTF FONTS
individually or zipped
......................................................................................................................................
DOWNLOADS AND MIRRORS
HERES THE LINK TO ALL AVAILABLE ROMS, SOUNDS, WALLPAPERS, FONTS BOOT AND SHUTDOWN ANIMATIONS AND ICON PACKS
be sure with roms you pick the correct rom, for the correct gear
downloads
gdrive
dropbox
IF YOU WANT YOUR WORK FEATURED HERE PM ME
.....................................................................................................................................​
WITH THANKS TO
GOOGLE
SAMSUNG
APPLE
HTC
THE CYANOGEN MOD TEAM
ANDROID_2013
SKIN1980
KASHORTIEXDA

GUIDES
FLASHING BOOT ANIMATIONS
first download your custom boot animation
place it on the root of your gears internal memory
then open sdb.exe , and run the following code
Code:
sdb root on
sdb shell mount -o remount rw /
sdb shell install-bootanimation.sh
sdb shell install-shutdownanimation.sh
sdb shell reboot watch
thats it done
FLASHING THEMES
To install these theme packs,open a command propmt naviagtated to sbd.exe, then in windows explorer copy all icons [unzipped, just the .png files] into the theme folder on your gear 2 internal disk, if you dont see it, the script "setup-folder.sh" below, will create it for you
run command
Code:
sdb root on
then
Code:
sdb shell
then if you havent already
Code:
setup-folder.sh
then,
Code:
install-theme.sh
then to complete type
Code:
reboot
CUSTOM SOUNDS
to install custom sounds follow these steps exactly
FIRST YOU MUST COPY CHOSEN SOUND FILES TO THE ROOT FOLDER WHERE YOUR COMMAND PROMPTING SDB.EXE
RINGTONES
Code:
sdb root on
Code:
sdb push (name_of_tone).ogg /opt/share/settings/Ringtones/
IF YOUR TONE NAME HAS SPACES USE "_" SEE BELOW
FOR EXAMPLE ;- sdb push Vega_tone.ogg /opt/share/settings/Ringtones
MUST USE CAPITALS WHERE THEY ARE
Code:
sdb shell reboot watch
DO NOT EXCEED 80MB
MAKE SURE IT LOOKS LIKE THIS
NOTIFICATIONS
FIRST YOU MUST COPY CHOSEN SOUND FILES TO THE ROOT FOLDER WHERE YOUR COMMAND PROMPTING SDB.EXE
Code:
sdb root on
Code:
sdb push "(name_of_tone).ogg" /opt/share/settings/Alerts/
IF YOUR TONE NAME HAS SPACES USE "_" SEE BELOW
FOR EXAMPLE ;- sdb push "Vega_tone.ogg" /opt/share/settings/Alerts/
MUST USE CAPITALS AND QUOTATION MARKS WHERE THEY ARE
Code:
sdb shell reboot watch
DO NOT EXCEED 80MB
MAKE SURE IT LOOKS LIKE THIS
thats it done
CUSTOM FONTS
FIRST YOU MUST COPY CHOSEN FONT FILES TO THE ROOT FOLDER WHERE YOUR COMMAND PROMPTING SDB.EXE
Code:
sdb root on
Code:
sdb push (name_of_font).ttf /usr/share/fonts/
IF YOUR FONT NAME HAS SPACES USE "_" SEE BELOW
FOR EXAMPLE ;- sdb push my_font.ttf /usr/share/fonts/
MUST USE CAPITALS WHERE THEY ARE
Code:
sdb shell reboot watch
MAKE SURE IT LOOKS LIKE THIS
then select chosen font on your gear 2 in display settings
CUSTOM ALARMS
To install custom alarms. First thing you must do is find your chosen sound and make it .ogg
Then make a copy of it in and convert to .wav format (do that fast and free here)
Then rename them both too
Ticktac.ogg
and
Ticktac.wav
Then you will need to turn on root and mount the system rw
With these commands
Code:
sdb shell root on
Code:
sdb shell "mount -o remount rw /"
Then either in tizen in sdk or sdb
remove the Ticktac.ogg and Ticktac.wav files from
opt/usr/share/settings/Alarms folder "with right click, remove"
Or
In sdb.exe using the pull commands
Code:
sdb pull /opt/share/settings/Alarms/Ticktac.ogg
Code:
sdb pull /opt/share/settings/Alarms/Ticktac.wav
Then reboot your watch with commands
Code:
sdb shell reboot watch
then copy Ticktac.ogg and Ticktac.wav to the gears internal disk folder "alarms"
then run sdb.exe again
Code:
sdb root on
Code:
sdb shell "mount -o remount rw /"
Code:
sdb shell install-alarms.sh
Code:
sdb shell reboot watch
disconnect your gear from your computer
and your done
MAKE SURE IT LOOKS LIKE THIS
CUSTOM BLUETOOTH DISCONNECT TONE
copy your desired tone, to the folder your sdb.exe is located
then rename it to "bt_disconnect.ogg"
then push it to "/usr/share/feedback/sound/operation/bt_disconnect.ogg"
like so
Code:
sdb push "C:\Users\Gav\Downloads\tizen\sdb\bt_disconnect.ogg" /usr/share/feedback/sound/operation/bt_disconnect.ogg
you will need to right click the file holding the shift key, and selecting copy as path for its location which i will highlight in bold below
sdb push "C:\Users\Gav\Downloads\tizen\sdb\bt_disconnect.ogg" /usr/share/feedback/sound/operation/bt_disconnect.ogg
(it should look like this)
then run code
Code:
sdb shell reboot watch
and its done
the sam can be done for reconnect tone, by renaming the file "bt_connect.ogg"​

Great work! I would love to see a theme with Galaxy S5 stock icons.

jamas79 said:
Great work! I would love to see a theme with Galaxy S5 stock icons.
Click to expand...
Click to collapse
would you, ok thats easy il get on that

Nice work!! I really want the CYANOGENMOD ICONS but the link is broken due to a lot of traffic Can you PM me the zip or give me a mirror please?

jason.T said:
Nice work!! I really want the CYANOGENMOD ICONS but the link is broken due to a lot of traffic Can you PM me the zip or give me a mirror please?
Click to expand...
Click to collapse
There you go http://forum.xda-developers.com/attachment.php?attachmentid=2897922&d=1408080556
Thanks for letting me know . Uh must have had a lot of traffic IL re duplicate everything on another 2 mirrors tomorrow morning

New links added and more being done as i type this

Updated op
new links added

op updated with custom alarm install guide

I added a ringtone to my gear 1.
the duration is 21 seconds and the size of 307 KB.
when I receive a call the ringtone starts after 7 seconds plays for 3 seconds stops for 2 seconds, plays for 3 seconds stops for 2 seconds etc.
where am I doing wrong?
can you help me?
Thanks in advance
md

What audio format is it in ? Is the audio corrupt ?
Try flashing it to your phone and seeing if it plays correctly then reflect to your watch into ring tones BTW not alerts

Well i reflash my gear 1 with [ROM] TizenMod 3.0 by Skin1980 i paired my note 3 without backup .
in sdb folder (shift right click open command here) : sdb root on then sdb shell then setup-folder.sh then reboot.
i downloaded GE Sounds then i put RobotsforEveryone.ogg in sdb folder then in sdb folder (shift right click open command here) :
sdb root on then sdb push RobotsforEveryone.ogg /opt/share/settings/Ringtones/ then sdb shell reboot watch....
All ok but if i set ringtone RobotsforEveryone.ogg when I receive a call the ringtone starts after 7 seconds plays for 3 seconds stops for 2 seconds, plays for 3 seconds stops for 2 seconds etc.
any suggestions? thanks
md

md70power said:
Well i reflash my gear 1 with [ROM] TizenMod 3.0 by Skin1980 i paired my note 3 without backup .
in sdb folder (shift right click open command here) : sdb root on then sdb shell then setup-folder.sh then reboot.
i downloaded GE Sounds then i put RobotsforEveryone.ogg in sdb folder then in sdb folder (shift right click open command here) :
sdb root on then sdb push RobotsforEveryone.ogg /opt/share/settings/Ringtones/ then sdb shell reboot watch....
All ok but if i set ringtone RobotsforEveryone.ogg when I receive a call the ringtone starts after 7 seconds plays for 3 seconds stops for 2 seconds, plays for 3 seconds stops for 2 seconds etc.
any suggestions? thanks
md
Click to expand...
Click to collapse
it does take a couplr of seconds to send to watch, but i cant explain the gaps, er....... are you sure the audio isnt corrupt, have you tried setting it on your phine to see if it plays flawlessy there

dumb question but if you set RobotsforEveryone.ogg (downloaded from yours GE SOUNDS) like ringtone in your watch, when you receive a call you hear it totally fine ? come on , 30 seconds without no stops?

What do you mean. 30 seconds no stops. Is that good or bad
Sent from my GT-I9305T using XDA Free mobile app

now ok ! i reflashed stock cnf1 then tizenmod 3.0
probably something is corrupt from stock rom and tizenmod upgrade cause i have overwritten everytime
thanks for support i appreciate it
md

new wall papers added

Any news on S5 theme?

Galaxy s5 icons added

more icon packs added

Navibar 3 -5 -7 buttons mod - android 5.0 air3g, air 2

Like in description
Navibar 3 -5 -7 buttons mod - android 5.0
air3g, air 2​
If you have my rom Lolipop ( mirek190 ) just plug USB and choose proper option.
On other rom make sure you have root and USB debugging on.
3 buttons navigation bar​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 buttons navigation bar​
7 buttons navigation bar​
air 3g
https://drive.google.com/open?id=0B8BF9-TGlz-FY2tWZUVZa05FU00
air 2
https://drive.google.com/open?id=0B8BF9-TGlz-FTEhvUTl2clE3Z3M
Ps - NOT RUN IT AS ADMINISTRATOR !

Hi mirek.
Can you add systemui.apk with a clock in its original position with 3 buttons?

Nope - center clock stays in the center like buttons

delete

Great job Mirek!

Hi, can you do this for the Air III? Do you need the stock SystemUI.apk?
EDIT:
I found this post www[dot]tsochen[dot]com/blog/post/15 and nearly the same intructions works for Air III M5C5. But the status_bar_*xml fix as not needed. This is the diff of navigation_bar.xml for 3 buttons
gist[dot]github[dot]com/kazuoteramoto/c0730bb27d0fb8dc6332

The system cannot find the path specified
Hi,
I'm getting the message: "The system cannot find the path specified."
I booted to mirek's rom, plugged the tablet to my laptop and ran the bat file. It was in debugging mode also.
Am I doing it wrong? Any help plz?

Wow, thanks, teramoto--this is fantastic! I just modded the SystemUI.apk on my device based on the tsochen link you provided, and your diff. I didn't want the screenshot and volume +/- buttons, but I did want to keep the menu button. So I just modded as indicated, and left the @id/menu entries untouched. The result is a nicely centered, four button variant.
EDIT: Somebody requested that I post my modded SystemUI.apk for a 4-button nav bar for the Air 3/III 32GB (M5C5). At the link below, I have done this, but also included 3- and 5-button versions, as well as the original 7-button SystemUI.apk version from the M5C5 v1.04 stock rom. The various SystemUI.apk files are obviously named by an explicit filename extension as you'll see when you download the archive. Also, let me reiterate--these are specifically for an Air 3/III 32GB (M5C5) tablet. Make sure that file ownership/permission is set correctly on installation else you will run into errors with the UI, and you will have to go in via adb root for manual fixing. Finally, and most importantly, note that credit for this goes to teramoto and the tsochen blog posting he pointed out above, which I just followed to do this, and also to mirek190 for starting this thread, and for helping out so many X98 Air users. Here's the link:
https://mega.nz/#!Hw0jRKBJ!0omuxVQXFHjzdbMV1bg6yvBhtMT570-gBhnkKxw2A4o

irfaan92 said:
Hi,
I'm getting the message: "The system cannot find the path specified."
I booted to mirek's rom, plugged the tablet to my laptop and ran the bat file. It was in debugging mode also.
Am I doing it wrong? Any help plz?
Click to expand...
Click to collapse
Facing the same problem...

irfaan92 said:
Hi,
I'm getting the message: "The system cannot find the path specified."
I booted to mirek's rom, plugged the tablet to my laptop and ran the bat file. It was in debugging mode also.
Am I doing it wrong? Any help plz?
Click to expand...
Click to collapse
Have you installed drivers ?

It worked actually.... I had been running it as admin when i shouldn't be...
But thanks for the reply mirek... Keep up the good work

irfaan92 said:
It worked actually.... I had been running it as admin when i shouldn't be...
But thanks for the reply mirek... Keep up the good work
Click to expand...
Click to collapse
I did the same as you for whole day....thanks anyway.

irfaan92 said:
It worked actually.... I had been running it as admin when i shouldn't be...
But thanks for the reply mirek... Keep up the good work
Click to expand...
Click to collapse
Thanks for a clue - 1st post updated .

verbage said:
Make sure that file ownership/permission is set correctly on installation else you will run into errors with the UI, and you will have to go in via adb root for manual fixing.
Click to expand...
Click to collapse
Someone asked for some more details about how to "go in via adb root for manual fixing". The question did not provide a lot of details except that the person copied over the file, renamed it, and then the navbar disappeared. So I am assuming that the SystemUI.apk file is correctly named and in the right place on the filesystem, but there is an issue of file ownership/permissions that needs to be fixed manually. If you are in that situation, or the UI is in an endless FC loop because of the same issue, here is what to do.
First, you'll need a working adb (Android Debug Bridge) install. If you don't have one already, the simplest thing to do is to just use the core adb files that mirek190 provides in either one of his ~2MB button mod archives linked at the start of this thread. In particular, I am talking about the "data" directory that has the five exe/dll files. Anyway, extract that, and then open a DOS command window in that directory. To quickly open up a command window, shift-right click on a blank part of the Explorer window, and choose the "Open command window here" option.
Now plug in your tablet, and give the following six commands in the command window you opened:
adb root [this initializes adb in root mode]
adb shell [this spawns an actual adb shell so you'll see the command prompt change]
mount -o rw,remount /system [this makes the /system partition writeable so you can make changes]
cd /system/priv-app/SystemUI [this changes to the right directory to avoid loooonnnngggg command lines]
chown root.root SystemUI.apk && chmod 644 SystemUI.apk [this manually specifies the correct file ownership and permissions]
exit [this gets you back out of the adb shell]
Note again that the above six commands are what is needed if the issue is just one of file ownership and permissions, and the modded SystemUI.apk is already correctly named and in the right spot. It is also the barebones version of a manual fix--before you give any commands, you might want to do some exploration to make sure my assumptions in the previous sentence are correct... For example, if your SystemUI.apk file is incorrectly named, you'll have to fix that first (i.e. "mv INCORRECTLYNAMEDFILE SystemUI.apk"). And before exiting out of the adb shell, you might want to restart the UI on the tablet just to make sure things are working correctly in case you need more triage via adb.
Hope this helps!

verbage said:
Someone asked for some more details about how to "go in via adb root for manual fixing". The question did not provide a lot of details except that the person copied over the file, renamed it, and then the navbar disappeared. So I am assuming that the SystemUI.apk file is correctly named and in the right place on the filesystem, but there is an issue of file ownership/permissions that needs to be fixed manually. If you are in that situation, or the UI is in an endless FC loop because of the same issue, here is what to do.
First, you'll need a working adb (Android Debug Bridge) install. If you don't have one already, the simplest thing to do is to just use the core adb files that mirek190 provides in either one of his ~2MB button mod archives linked at the start of this thread. In particular, I am talking about the "data" directory that has the five exe/dll files. Anyway, extract that, and then open a DOS command window in that directory. To quickly open up a command window, shift-right click on a blank part of the Explorer window, and choose the "Open command window here" option.
Now plug in your tablet, and give the following six commands in the command window you opened:
adb root [this initializes adb in root mode]
adb shell [this spawns an actual adb shell so you'll see the command prompt change]
mount -o rw,remount /system [this makes the /system partition writeable so you can make changes]
cd /system/priv-app/SystemUI [this changes to the right directory to avoid loooonnnngggg command lines]
chown root.root SystemUI.apk && chmod 644 SystemUI.apk [this manually specifies the correct file ownership and permissions]
exit [this gets you back out of the adb shell]
Note again that the above six commands are what is needed if the issue is just one of file ownership and permissions, and the modded SystemUI.apk is already correctly named and in the right spot. It is also the barebones version of a manual fix--before you give any commands, you might want to do some exploration to make sure my assumptions in the previous sentence are correct... For example, if your SystemUI.apk file is incorrectly named, you'll have to fix that first (i.e. "mv INCORRECTLYNAMEDFILE SystemUI.apk"). And before exiting out of the adb shell, you might want to restart the UI on the tablet just to make sure things are working correctly in case you need more triage via adb.
Hope this helps!
Click to expand...
Click to collapse
Hi. first let me thank you for your effort.
I tried your solution but I'm still without the buttons and notification bar.
Code:
D:\@SUPPORT\TECLAST_X98\x98air3g-buttons-mod\data>adb root
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
D:\@SUPPORT\TECLAST_X98\x98air3g-buttons-mod\data>adb shell
[email protected]_m5c5:/ # mount -o rw,remount /system
mount -o rw,remount /system
[email protected]_m5c5:/ # cd /system/priv-app/SystemUI
cd /system/priv-app/SystemUI
[email protected]_m5c5:/system/priv-app/SystemUI # ls
ls
SystemUI.apk
x86
[email protected]_m5c5:/system/priv-app/SystemUI # ls -l SystemUI.apk
ls -l SystemUI.apk
-rw-r--r-- root root 3572757 2016-01-13 01:11 SystemUI.apk
[email protected]_m5c5:/system/priv-app/SystemUI # chown root.root SystemUI.apk && chmod 644 SystemUI.apk
chown root.root SystemUI.apk && chmod 644 SystemUI.apk
<
[email protected]_m5c5:/system/priv-app/SystemUI # ls -l SystemUI.apk
ls -l SystemUI.apk
-rw-r--r-- root root 3572757 2016-01-13 01:11 SystemUI.apk
[email protected]_m5c5:/system/priv-app/SystemUI #
Am I doing something wrong? Any other idea? Or can I put the original file back?
Thanks for any help with this
EDIT: I forgot to mention that I'm using now the sikke1's GoogleNow custom rom. That might be the reason?

wepecko said:
I tried your solution but I'm still without the buttons and notification bar...Am I doing something wrong? Any other idea? Or can I put the original file back?...EDIT: I forgot to mention that I'm using now the sikke1's GoogleNow custom rom. That might be the reason?
Click to expand...
Click to collapse
Hmmm, from your ls -l command, it appears that the file ownership and permission were already set correctly, and so there was no need to give the chown/chmod commands again, but doing so didn't hurt, and only confirmed things.
My M5C5 is also on sikke1's rom--I started with mirek190's v6.1 slim version for the Air 2/II even though I have an Air 3/III, and it worked pretty good except for some hiccups. And so that is why I ended up on sikke1's debloated M5C5 rom, too.
Have you rebooted? You may be nervous to do so, understandably, but adb is enabled by default in the sikke1 rom so even if the graphical UI does not pop up, you can still do manual triage via adb.
---------- Post added at 07:19 PM ---------- Previous post was at 06:53 PM ----------
One thought for the future--if you are going to do this manually, you should stage it appropriately to hopefully avoid issues. For example, copy the original to a backup with the -p option to preserve file properties while still leaving the in-use original completely intact (i.e. "cp -p SystemUI.apk SystemUI.apk.ORIGINAL)". Then copy your modded apk file(s) into the same directory, and make sure file ownership/permissions are set as per above. Then do another cp -p to replace the in-use original with the modded apk.
Here's my listing for the directory to show you what I mean. I have the original apk plus the 3-, 4-, and 5-button modded apks all in the same directory with the correct ownership/permissions set. I can quickly change to any config, for example, the 3-button config, with a single cp -p command, i.e. "cp -p SystemUI.apk.MODDED-3-BUTTON SystemUI.apk". And there is no downtime/hiccup because one file is immediately replaced by the other, and the ownership/permissions are already correctly set.
Code:
[email protected]_m5c5:/system/priv-app/SystemUI # ls -la
ls -la
-rw-r--r-- root root 3572761 2015-12-31 00:54 SystemUI.apk
-rw-r--r-- root root 3572757 2016-01-03 16:43 SystemUI.apk.MODDED-3-BUTTON
-rw-r--r-- root root 3572761 2015-12-31 00:54 SystemUI.apk.MODDED-4-BUTTON
-rw-r--r-- root root 3572764 2016-01-03 16:43 SystemUI.apk.MODDED-5-BUTTON
-rw-r--r-- root root 3604448 2015-12-31 00:21 SystemUI.apk.ORIGINAL
drwxr-xr-x root root 2015-08-26 23:06 x86
[email protected]_m5c5:/system/priv-app/SystemUI #
Again, since you have confirmed everything, I would suggest rebooting if you have not done that. As I said, even if the graphical UI does not come up, you can still get into adb for repairs. At the very worst, you might have to reflash the rom.
I'm not sure why you have had hiccups, but these modded apks are directly from the stock SystemUI.apk of a v1.04 M5C5 rom. I have the modded navigation_bar.xml files, and I can send those or just diffs vs. the original so you can see the few lines that I changed. But you'll see they are just like described by teramoto and the tsochen blog he pointed out.

Thanks verbage. I understand your backup procedure and admit it was a mistake to rewrite the file directly.
However im still trying to find solution to this. I did restart ofcourse, several times, but it didnt help at all. It was late yesterday so i didn't have much time to try different scenarios. Anyway tonight im going to try to update the file with 4 and 5 buttons versions and will see if I'll have any luck.
One more idea: would it be possible that the reason of this not working is that it might be in conflict with xposed apk already installed?
Sent from my XT890 using Tapatalk

wepecko said:
Anyway tonight im going to try to update the file with 4 and 5 buttons versions and will see if I'll have any luck... One more idea: would it be possible that the reason of this not working is that it might be in conflict with xposed apk already installed?Sent from my XT890 using Tapatalk
Click to expand...
Click to collapse
Hmmm, sorry to hear you are still having a problem. The 3-, 4-, and 5-button versions all work perfectly on my Air 3/III using sikke1's debloated M5C5 rom, and since you have the same device, any of the versions should also work for you.
Certainly, the 7-button stock original should work, too, and that is also included in the archive I posted.
Whether there may be a conflict with the xposed framework you have installed, I don't know as I do not have xposed installed on my Air 3/III.
Anyway, good luck with fix, and we'll wait to hear more.

I tried again from the start and everything is working perfect now. Tested succesfully all versions of SystemUI file.
I have no explanation on the troubles during the first try though. I did everything the same way as yesterday.
:victory:

wepecko said:
I tried again from the start and everything is working perfect now. Tested succesfully all versions of SystemUI file.
I have no explanation on the troubles during the first try though. I did everything the same way as yesterday.
:victory:
Click to expand...
Click to collapse
Great, glad to hear you have it working!