To access self diagnostic menu just press
* # * # 3424 # * # * [no spaces]
Related
Wi fi does not work
The problem appeared after format
And I called * # * # 526 # * # * and told me
not set driver loaded [ng]
Help me please...
na7lamsawa said:
Wi fi does not work
The problem appeared after format
And I called * # * # 526 # * # * and told me
not set driver loaded [ng]
Help me please...
Click to expand...
Click to collapse
What ROM?
WI-FI does not turn on or you do not have reception?
You are sure there is no problem with WI-FI router?
na7lamsawa said:
Wi fi does not work
The problem appeared after format
And I called * # * # 526 # * # * and told me
not set driver loaded [ng]
Help me please...
Click to expand...
Click to collapse
go to wpa supplicant.conf file and set interface to wlan0
and say problem briefly:angel:
Guys, I'm having trouble with my Lumia 820. I was trying to install the engineering ffu forcibly with WP Internals. I dumped the MainOS and EFIESP partitions, compress and installed as custom ROM. I managed to install, but has problem that was missing files in Windows/system32/DRIVERS. I tried to reinstall the original ffu and WP Internals told me to choose an appropriate ffu for the device. I tried to use the Nokia Care Suit and is giving an error of the same type. I tried using the Windows Device Recovery Tool and is asking to return the screen 'wellcome'. Can someone help me?
Edit: I'm on red screen now, but problems still
Edit 2: I get the device info whith thor2
Code:
* ----------------------------------------------------------------------------------------- *
* *
* - * - * - * - * - * D E V I C E - I N F O * - * - * - * - * - * - * - * - *
* *
* ----------------------------------------------------------------------------------------- *
Read FlashApp Build Info
Read parameter from UEFI Flash App
Read parameter Ok
FlashApp Build Info: Date:Jun 13 2014 Time:09:59:11 Info:-
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Read final config
Read parameter from UEFI Flash App
Read parameter Ok
Final config status: 0x00007FFF
SECURE_BOOT enabled
FFU_VERIFY enabled
JTAG enabled
SHK enabled
SIMLOCK enabled
PRODUCTION_DONE enabled
RKH enabled
PUBLIC_ID enabled
DAK enabled
SEC_GEN enabled
OEM_ID enabled
FAST_BOOT enabled
SPDM_SEC_MODE enabled
RPM_WDOG enabled
SSM enabled
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Get Device status
Transfer size: 2363392
Buffer size: 2359296
Number of sectors: 15269888
PlatformInfo is Nokia.MSM8960.P5174.3.2.1
Async protocol version: 01
Security info sublock detected
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RnD Certificate not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Read charging status
Read parameter from UEFI Flash App
Read parameter Ok
State of charge: 11 %. Charging current: 223 mA (discharging)
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Read public ID
Read parameter from UEFI Flash App
Read parameter Ok
Public ID is 3B7BF6A7A4212271CCDEBF6FEDECC1F5FE2FB7FA
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Read UEFI Secure Boot Info
Read parameter from UEFI Flash App
Read parameter Ok
-- UEFI Secure Boot Info --
The state of public Platform Key (PK) UEFI variable:
Production
The state of Key Exchange Key Signature Database (KEK) UEFI variable:
Unknown
The state of Signature Database (db) UEFI variable:
Unknown
The state of Forbidden Certificates Database (dbx) UEFI variable:
Unknown
The state of Secure Boot Policy (CurrentPolicy) UEFI variable:
Unknown
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Read Root Key Hash
Read parameter from UEFI Flash App
Read parameter Ok
Root Key Hash is DB73418E5840941CE7BD35949085B8F74628D511F19285A092ED3B600A64CC29
* - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - * - *
Starting to read Phone Info
Detecting UEFI responder
Send HELLO
HELLO success
Lumia Flash App detected
Disable time-outs
Read FlashApp Build Info
Read parameter from UEFI Flash App
Read parameter Ok
FlashApp Build Info: Date:Jun 13 2014 Time:09:59:11 Info:-
Transfer size: 2363392
Buffer size: 2359296
Number of sectors: 15269888
PlatformInfo is Nokia.MSM8960.P5174.3.2.1
Async protocol version: 01
Security info sublock detected
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse blown
RnD Certificate not found
Authentication not done
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Read Root Key Hash
Read parameter from UEFI Flash App
Read parameter Ok
Root Key Hash is DB73418E5840941CE7BD35949085B8F74628D511F19285A092ED3B600A64CC29
Read public ID
Read parameter from UEFI Flash App
Read parameter Ok
Public ID is 3B7BF6A7A4212271CCDEBF6FEDECC1F5FE2FB7FA
Protocol version 1.18 Implementation version 2.2
Booting to PiApp
Reboot to PiApp command sent successfully.
Waiting for matching re-connection of device.
Device is online
Detecting UEFI responder
Send HELLO
HELLO success
Lumia Phone Info detected
Disable time-outs
Protocol version 1.1 Implementation version 1.3
Read Phone Info
Phone Info:
Version: 1.1.1.3
TYPE: RM-825
LPSN: MOM158832
HWID: 2452
CTR: 059Q8H4
MC: 0205607
IMEI: 355941053163313
* ----------------------------------------------------------------------------------------- *
* *
* - * - * - E N D - O F - D E V I C E - I N F O * - * - * - * - *
* *
* ----------------------------------------------------------------------------------------- *
Edit 3: I'm getting this error when trying to install partition by partition:
View attachment 3900751
Edit 4: I'm having trouble with the signature that is on my phone. When I leave the check ffu and mobile subscriptions, I get the following error:
View attachment 3904003
Edit 5: When I try to unlock bootloader, I got this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anybody here?
up
Hello to all. today or tried to unlock my z bootloader. as a guide before I typed on the keypad: * # * # 7378423 # * # * - Service info> Configuration-rooting status Bootloader unlock allowed: yes after I went on the Sony website to get the unlock code after receiving the code I begin with the procedure, but without any success either flashtool and be with fastboot. continuing to try now Typing on the keypad: * # * # 7378423 # * # *
- Service info> Configuration rooting-out status unknown hope I have not made
do not you tell me something
Hello i 'm trying to get my ddr vendor, but i dont know how you guy get the screen with all those infos, can you help me? thanks
Enter the code below into the phone application, when open go to the software version.
Code: * # * # 64663 # * # *
J.D.M said:
Enter the code below into the phone application, when open go to the software version.
Code: * # * # 64663 # * # *
Click to expand...
Click to collapse
nice thanks you my friend
i have micron ddr is it sure to fail?
Hello, I'm new here so please excuse me if I post this in the wrong section.
I have a OnePlus 7t on Android 11 with Magisk installed.
I am trying to swap the R3 with Circle on my controller. In the keylayout file it shows that R3 is in fact Circle but doesn't work in games. ( Reverts to default controller mapping)
I have already edited and successfully changed the keylayout file for my PS4 Controller ( Vendor_054c_Product_09cc.kl ) by creating a magisk module since I'm on a stock Os and cant copy the .kl file over to system/usr/keylayouts . SEE BELOW
Code:
# Copyright (C) 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Sony Playstation(R) DualShock 4 Controller
#
# Mapping according to https://developer.android.com/training/game-controllers/controller-input.html
# Square
key 0x130 BUTTON_X
# Cross
key 0x131 BUTTON_A
# Circle
key 0x132 BUTTON_THUMBR
# Triangle
key 0x133 BUTTON_Y
key 0x134 BUTTON_L1
key 0x135 BUTTON_R1
key 0x136 BUTTON_L2
key 0x137 BUTTON_R2
# L2 axis
axis 0x03 LTRIGGER
# R2 axis
axis 0x04 RTRIGGER
# Left Analog Stick
axis 0x00 X
axis 0x01 Y
# Right Analog Stick
axis 0x02 Z
axis 0x05 RZ
# Left stick click
key 0x13a BUTTON_THUMBL
# Right stick click
key 0x13b BUTTON_B
# Hat
axis 0x10 HAT_X
axis 0x11 HAT_Y
# Mapping according to https://www.kernel.org/doc/Documentation/input/gamepad.txt
# Share
key 0x138 BUTTON_SELECT
# Options
key 0x139 BUTTON_START
# PS key
key 0x13c BUTTON_MODE
# Touchpad press
# The touchpad for this joystick will become a separate input device in future releases
# and this button will be equivalent to left mouse button
# Therefore, map it to KEYCODE_BUTTON_1 here to allow apps to still handle this on earlier versions
key 0x13d BUTTON_1
I've made sure the permissions are set correctly as well as seen in the install.sh
Code:
##########################################################################################
#
# Magisk Module Installer Script
#
##########################################################################################
##########################################################################################
#
# Instructions:
#
# 1. Place your files into system folder (delete the placeholder file)
# 2. Fill in your module's info into module.prop
# 3. Configure and implement callbacks in this file
# 4. If you need boot scripts, add them into common/post-fs-data.sh or common/service.sh
# 5. Add your additional or modified system properties into common/system.prop
#
##########################################################################################
##########################################################################################
# Config Flags
##########################################################################################
# Set to true if you do *NOT* want Magisk to mount
# any files for you. Most modules would NOT want
# to set this flag to true
SKIPMOUNT=false
# Set to true if you need to load system.prop
PROPFILE=false
# Set to true if you need post-fs-data script
POSTFSDATA=false
# Set to true if you need late_start service script
LATESTARTSERVICE=false
##########################################################################################
# Replace list
##########################################################################################
# List all directories you want to directly replace in the system
# Check the documentations for more info why you would need this
# Construct your list in the following format
# This is an example
REPLACE_EXAMPLE="
/system/app/Youtube
/system/priv-app/SystemUI
/system/priv-app/Settings
/system/framework
"
# Construct your own list here
REPLACE="/system/usr/keylayout/Vendor_054c_Product_09cc.kl"
##########################################################################################
#
# Function Callbacks
#
# The following functions will be called by the installation framework.
# You do not have the ability to modify update-binary, the only way you can customize
# installation is through implementing these functions.
#
# When running your callbacks, the installation framework will make sure the Magisk
# internal busybox path is *PREPENDED* to PATH, so all common commands shall exist.
# Also, it will make sure /data, /system, and /vendor is properly mounted.
#
##########################################################################################
##########################################################################################
#
# The installation framework will export some variables and functions.
# You should use these variables and functions for installation.
#
# ! DO NOT use any Magisk internal paths as those are NOT public API.
# ! DO NOT use other functions in util_functions.sh as they are NOT public API.
# ! Non public APIs are not guranteed to maintain compatibility between releases.
#
# Available variables:
#
# MAGISK_VER (string): the version string of current installed Magisk
# MAGISK_VER_CODE (int): the version code of current installed Magisk
# BOOTMODE (bool): true if the module is currently installing in Magisk Manager
# MODPATH (path): the path where your module files should be installed
# TMPDIR (path): a place where you can temporarily store files
# ZIPFILE (path): your module's installation zip
# ARCH (string): the architecture of the device. Value is either arm, arm64, x86, or x64
# IS64BIT (bool): true if $ARCH is either arm64 or x64
# API (int): the API level (Android version) of the device
#
# Availible functions:
#
# ui_print <msg>
# print <msg> to console
# Avoid using 'echo' as it will not display in custom recovery's console
#
# abort <msg>
# print error message <msg> to console and terminate installation
# Avoid using 'exit' as it will skip the termination cleanup steps
#
# set_perm <target> <owner> <group> <permission> [context]
# if [context] is empty, it will default to "u:object_r:system_file:s0"
# this function is a shorthand for the following commands
# chown owner.group target
# chmod permission target
# chcon context target
#
# set_perm_recursive <directory> <owner> <group> <dirpermission> <filepermission> [context]
# if [context] is empty, it will default to "u:object_r:system_file:s0"
# for all files in <directory>, it will call:
# set_perm file owner group filepermission context
# for all directories in <directory> (including itself), it will call:
# set_perm dir owner group dirpermission context
#
##########################################################################################
##########################################################################################
# If you need boot scripts, DO NOT use general boot scripts (post-fs-data.d/service.d)
# ONLY use module scripts as it respects the module status (remove/disable) and is
# guaranteed to maintain the same behavior in future Magisk releases.
# Enable boot scripts by setting the flags in the config section above.
##########################################################################################
# Set what you want to display when installing your module
print_modname() {
ui_print "*******************************"
ui_print " Ps4 Controller Crouch Fix "
ui_print "*******************************"
}
# Copy/extract your module files into $MODPATH in on_install.
on_install() {
# The following is the default implementation: extract $ZIPFILE/system to $MODPATH
# Extend/change the logic to whatever you want
ui_print "- Extracting module files"
unzip -o "$ZIPFILE" 'system/*' -d $MODPATH >&2
ui_print "- deleting package cache"
rm -rf /data/system/package_cache/*
}
# Only some special files require specific permissions
# This function will be called after on_install is done
# The default permissions should be good enough for most cases
set_permissions() {
# The following is the default rule, DO NOT remove
set_perm_recursive $MODPATH 0 0 0755 0644
set_perm $MODPATH/system/usr/keylayout/Vendor_054c_Product_09cc.kl 0 0 0744
# Here are some examples:
# set_perm_recursive $MODPATH/system/lib 0 0 0755 0644
# set_perm $MODPATH/system/bin/app_process32 0 2000 0755 u:object_r:zygote_exec:s0
# set_perm $MODPATH/system/bin/dex2oat 0 2000 0755 u:object_r:dex2oat_exec:s0
# set_perm $MODPATH/system/lib/libart.so 0 0 0644
}
# You can add more functions to assist your custom script code
So basically everything seems to be correct but yet in games and gamepad tester the control functions as default ( R3 is not circle)
I've attached images showing im rooted and have the module succesfully installed and enabled, also showing the permissions of the .kl file in the keylayout folder.
Please help! and thank you in advance.