Database Develop

Bionic peed itself then forgot its name.....

It figures it would happen on a Friday night. Found out Saturday morning that Big Red no longer stocks replacement phones. No fastboot access, no life at all other then it gets warm when it's plugged into the charger and the LED lights up white when the battery is out and USB is connected.
Phone was pretty hot in my pocket right before it died. It lit up once for a second (Dual Core screen) after I had pulled the battery for 20 mins. The graphic flashed away and the backlight stayed on. Nothing else.
Not missing anything am I ? I've already got a replacement coming but if I could access this phone again it would make the rebuild of the new phone easier.

Put the battery in but don't power it on.
Plug it into the charger and check back in 2 hours.
Then try turning in on again.
Sent from my DROID BIONIC using xda premium

[Q] LED flashes 9 times when plugged into charger

Folks,
I let my phone go completely flat the other day. I'd gone away for a week and had forgotten to take my XL with me, came back, plugged it into the charger for an hour, and nothing.
I do notice that after removing the battery, putting it back together, and plugging it into the charger, the LED flashes red 9 times (exactly 9, each time i do this). I cannot find anything that mentions 9 red led flashes in forums, docs or google.
I'll leave it to charge overnight, see if that makes a difference, but am a bit worried about it all (bought the XL in Singapore, and I'm in Oz, and only have Singapore warranty).
On side note, phone is rooted, the chinese recovery flashed (anzhi?) with bindroid rom flashed.
I'll see how I am after 12+ hours charging, but any suggestions/advice would be most welcome.

Hi I don't have a XL but I do have a desire z and it does the same thing I'm not sure if its nine led flashes but it certainly does flash for a while and won't turn on like its dead, i thought its something to protect the battery when drained fully. Although I may be wrong. I find using the original HTC charger and leaving it for an hour or two it sorts itself out when really drained. The other thing is to use a different battery then swap back to the one that was flashing this sometime gives it a kick up the backside. Hope you get it sorted, regards b
Sent from my Transformer TF101 using xda premium

if your phones vibrates or LED flashes red and won't turn on. This is a qualcomm debug message and nothing to do with HTC, There may be a H/W fault.

qualcomm debug issue? thanks
Sent from my GT-P7100 using xda premium

fixed. after reading the forums again some more, I took the battery out for two hours, put it back in, connected to charger and turned on. it then, finally booted up. it was at zero charge though, so I have to leave it for a while.
the key thing is connect phone to charger before turning on, after having left battery out, otherwise it will boot up and then shut down again.
forget the multiple threads + posters who gave me inspiration, but kudos to xda.
Sent from my GT-P7100 using xda premium

[Q] Is it brick?!

Well im pretty good with electronic, dis assembly and reassembly... however I may have bit the farm here. I replaced my digitizer for my device and the adhesive I purchased wasnt good enough so it was causing touch screen issues... So I took it all apart again and put it all back together to find OMG it wont turn on? Fully charged battery so I know thats not the issue and everything seems to be put in the right place (as if there is any other way to re-assemble this phone)....
So I did some trouble shooting... I tried switching to an original charger, attempted hard reboot assumed maybe the device was confused... left it on the charger as if god himself removed the remaining battery life all to no avail... However one thing I did notice is that for a while when the device was unplugged and sitting there the LED light would periodically blink red... hmm couldnt find anything on that ... Also when I remove the battery leads and plug it in the LED light illuminates green and stays that way regardless there still is no function to the phone literally a blank screen... I checked the screen and digitizer for damages both on its leads and the devices themselves and found there to be nothing wrong with them...
Im pretty sure I know the answer Im just hoping that Im wrong..

Also heres something Ive noticed as well, that when I plug both the phone in and leave the battery in it gets dangerously hot like battery about to explode hot after about 10 minutes or so

Berrabus said:
Also heres something Ive noticed as well, that when I plug both the phone in and leave the battery in it gets dangerously hot like battery about to explode hot after about 10 minutes or so
Click to expand...
Click to collapse
I buy broken Atrix HDs off of eBay all the time so I may be able to help. I've noticed that even though the battery is fully charged, when replacing the digitizer, the phone will think it's dead until it hits 100%. I usually have to hold the power button a Lil longer than normal, and when it turns on it will say 1% bat, remaining. It will charge the remaining battery and instantly jump to 100% when it's full.
Tl;dr: hold power until it turns on, charge to 100%

Markyzz said:
I buy broken Atrix HDs off of eBay all the time so I may be able to help. I've noticed that even though the battery is fully charged, when replacing the digitizer, the phone will think it's dead until it hits 100%. I usually have to hold the power button a Lil longer than normal, and when it turns on it will say 1% bat, remaining. It will charge the remaining battery and instantly jump to 100% when it's full.
Tl;dr: hold power until it turns on, charge to 100%
Click to expand...
Click to collapse
Well heres the thing. I already have been using the phone since Ive replaced the digitizer and its functioned relatively properly (aside from the adhesive not holding the digitizer down) the thing that concerns me is when I hook the battery back up to it and plug the phone in it gets dangerously hot like literally to the point where I question weather or not its going to explode also it doesnt show any LED function with the battery connected.

Go through and double check all of your connections. Also, connect it to your computer and see what device manager says.
Sent from my MB886 using xda premium

darknessrise1234 said:
Go through and double check all of your connections. Also, connect it to your computer and see what device manager says.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Checked, rechecked and triple checked the connections as you know with the MB886 the connections only go one way and they either are in or not theres no middle-man. Unfortunatly my data-cable is not functioning so I cannot hook it up to the PC at the moment however I assume that if there is no function or charge with it just being plugged into the power cable then likewise would result from a PC connection. Not to mention the unexplained heat... like Im saying its almost to hot to hold kinda heat..

Well, last one I bricked it would be green light anytime it was plugged in and it had a specific register on the device manager.
Sent from my MB886 using xda premium

darknessrise1234 said:
Well, last one I bricked it would be green light anytime it was plugged in and it had a specific register on the device manager.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
When I plug it into my computer it says USB INPUT DEVICE RECOGNIZED DRIVERS INSTALLED CORRECTLY! To me that all sounds posative! Question is where to from here?

Thats with the battery out... When I hook the battery up it immediatly begins to get warm and recognizes as a Motorola USB Composite Device then starts disconnecting/reconnecting... Also during this process I noticed that the aluminum battery chassis is cracked right where the battery connects to the unit...

Do you have a second battery? If so, test the other battery. Otherwise, I am out of thoughts.
Sent from my Atrix HD using xda premium

another dead HTC One thread

Hey all,
I've tried searching for a resolution and tried several, but no go,
Here is my issue.
Playing ingress today (I know, battery hog) and noticed phone down to 54%, plugged it into car cigarette power plug and phone was still extremely warm after 30 mins of charging with ingress killed and screen off.
Got back to my hotel, it was at 34% and still very warm.
Turned it off and plugged into wall charger, waited about 15 min, tuned on, and now it was down to 17%!!!!!
It would slowly charge and after 1 hour would only gain 5% with everything off (gps,wifi, in airplane mode).
I am using latest nightly CM 10.2 with thouvvak's kernel and Fast Charge enabled, but also restored a stock image and a previous backup of cm10.2
from 1 week previous. All CM roms tried with and without cusom kernel.
Even tried latest nightly CM10.2 incase here was an issue with that one build..
Everytime I tried to charge it, it would get extremely warm. I know this phone gets warm, but this is warmer than normal..
For a while it was flashing red light, even while charging and cool (ish).
Now it doesn't show any charge light, won't power on.
Tried turning on under bright light, Vol up+vol down+ power, and any other key combination.
Anyone else ever have this issue?
I have it sitting on HTC Original charger now and will see what happens overnight.
Thanks!
Bryan

n3m35155 said:
Hey all,
I've tried searching for a resolution and tried several, but no go,
Here is my issue.
Playing ingress today (I know, battery hog) and noticed phone down to 54%, plugged it into car cigarette power plug and phone was still extremely warm after 30 mins of charging with ingress killed and screen off.
Got back to my hotel, it was at 34% and still very warm.
Turned it off and plugged into wall charger, waited about 15 min, tuned on, and now it was down to 17%!!!!!
It would slowly charge and after 1 hour would only gain 5% with everything off (gps,wifi, in airplane mode).
I am using latest nightly CM 10.2 with thouvvak's kernel and Fast Charge enabled, but also restored a stock image and a previous backup of cm10.2
from 1 week previous. All CM roms tried with and without cusom kernel.
Even tried latest nightly CM10.2 incase here was an issue with that one build..
Everytime I tried to charge it, it would get extremely warm. I know this phone gets warm, but this is warmer than normal..
For a while it was flashing red light, even while charging and cool (ish).
Now it doesn't show any charge light, won't power on.
Tried turning on under bright light, Vol up+vol down+ power, and any other key combination.
Anyone else ever have this issue?
I have it sitting on HTC Original charger now and will see what happens overnight.
Thanks!
Bryan
Click to expand...
Click to collapse
Connect it to your pc and tell me what you see in device manager.
Sent from my iPod touch using Tapatalk

Nothing when plugging in to PC USB port.
No sounds even.
Sent from my Galaxy Nexus using xda app-developers app

n3m35155 said:
Hey all,
I've tried searching for a resolution and tried several, but no go,
Here is my issue.
Playing ingress today (I know, battery hog) and noticed phone down to 54%, plugged it into car cigarette power plug and phone was still extremely warm after 30 mins of charging with ingress killed and screen off.
Got back to my hotel, it was at 34% and still very warm.
Turned it off and plugged into wall charger, waited about 15 min, tuned on, and now it was down to 17%!!!!!
It would slowly charge and after 1 hour would only gain 5% with everything off (gps,wifi, in airplane mode).
I am using latest nightly CM 10.2 with thouvvak's kernel and Fast Charge enabled, but also restored a stock image and a previous backup of cm10.2
from 1 week previous. All CM roms tried with and without cusom kernel.
Even tried latest nightly CM10.2 incase here was an issue with that one build..
Everytime I tried to charge it, it would get extremely warm. I know this phone gets warm, but this is warmer than normal..
For a while it was flashing red light, even while charging and cool (ish).
Now it doesn't show any charge light, won't power on.
Tried turning on under bright light, Vol up+vol down+ power, and any other key combination.
Anyone else ever have this issue?
I have it sitting on HTC Original charger now and will see what happens overnight.
Thanks!
Bryan
Click to expand...
Click to collapse
Never use fast charge!
Sent from my One using XDA Premium 4 mobile app

This happened to mine running cm, had to pay £170 to get it fixed, never using cm again ahaha
Sent from my HTC One using Tapatalk

l.m.prowse said:
This happened to mine running cm, had to pay £170 to get it fixed, never using cm again ahaha
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What needed to get replaced?
Motherboard or battery?

n3m35155 said:
What needed to get replaced?
Motherboard or battery?
Click to expand...
Click to collapse
The report said the main board, they just stuck the screen of mine onto a new body
Sent from my HTC One using Tapatalk

jthatch12 said:
Never use fast charge!
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why not?
I am asking this because I have always had it on..
Sent from my HTC One using XDA Premium 4 mobile app

n3m35155 said:
What needed to get replaced?
Motherboard or battery?
Click to expand...
Click to collapse
don't know if this will help, but try: http://forum.xda-developers.com/showthread.php?t=2481211

C6903 No longer charging.

My Z1 has started playing silly games, it no longer charges properly! It will be fine for a while, typically ten minutes or so, then it will pop up a warning message saying the connected power source isn't charging the battery. It will then drain faster than it can charge. Last night for example I put it on charge around 7pm with 67% and took it off at 8am this morning, but it's dropped to 3%. I've tried various chargers and cables, the dock, all 3 of my magnetic cables (how I normally it charge anyway) and tried all the usual methods of reset such as holding the red button under the SIM port down. Nothing works. It started around two weeks ago, since then I have flashed another firmware but the problem persists.
My phone is currently plugged into a 2 amp capable magnetic dock plug with the Sony plug that comes in the box. Just typing this message it's drained the battery 9% while on charge, wifi on and network off, screen brightness down and no other apps open.
I've spoken to Sony and they won't do anything, my rear glass is cracked so they won't even look at it and they seem to think it's water damage! The phone hasn't ever seen water so that's a load of BS from them.
What can I do?
Sent from my C6903 using XDA Premium 4 mobile app

Use the normal USB charger

gregbradley said:
Use the normal USB charger
Click to expand...
Click to collapse
That doesn't work, the problem still persists. That's the first charger I tried when the handset started not taking a charge.
Sent from my C6903 using XDA Premium 4 mobile app

Looks like you need a new device as it could be when the back cracked the battery got moisture (not direct) infected
Sent from my C6903 using Tapatalk

AndroidDan said:
Looks like you need a new device as it could be when the back cracked the battery got moisture (not direct) infected
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Greaaaaaaat. That's the last thing I need :-S I've just tried my girlfriends iPhone charger and it seems to charge it, very slowly. I will have to dig my Blackberry out as a back up and see how the Z1 goes.
Sent from my C6903 using XDA Premium 4 mobile app

I have the same problem after updating to KitKat. I'm using dock station too, but not the one that came with my phone (I didn't got any with it).
I put my phone to charge, and after 5-10 minutes it starts to show the message. One time I found my phone drained till 0% in the morning. So, I found a simple solution for my phone. Before I put the phone to charge, I turn it off, wait 2-3 seconds then turn it on. I immediately put the phone to the dock in the boot process. That's the only way I can properly charge my phone.
Hope this will help you...

Vengeance66 said:
I have the same problem after updating to KitKat. I'm using dock station too, but not the one that came with my phone (I didn't got any with it).
I put my phone to charge, and after 5-10 minutes it starts to show the message. One time I found my phone drained till 0% in the morning. So, I found a simple solution for my phone. Before I put the phone to charge, I turn it off, wait 2-3 seconds then turn it on. I immediately put the phone to the dock in the boot process. That's the only way I can properly charge my phone.
Hope this will help you...
Click to expand...
Click to collapse
Excellent! I will have a go and see if it works for me, Thankyou!
Sent from my C6903 using XDA Premium 4 mobile app