From yesterday, I cannot enable wifi. So i decided to change the rom. After I change the rom, my phone is rebooting constantly. It reach to the desktop and reboot . What should I do? Help me please!
St3listu96 said:
From yesterday, I cannot enable wifi. So i decided to change the rom. After I change the rom, my phone is rebooting constantly. It reach to the desktop and reboot . What should I do? Help me please!
Click to expand...
Click to collapse
Wipe data from recovery
If is still rebooting, wipe data again and flash stock rom / custom rom.
Stock Rom
Flash stock rom... Also if you want something better search for cyanogenmod 10.1 by bleached. Its almost no bugs working camera and camcorder. There is a cwm recovery 6.0.3.2 in the downloads section which is perfect for your backups. Also recovery rom have full internal storage mounted so its not like thewhisp's CM...
Related
Hi I have WEUI v1.0 installed on Galaxy I9000 with the baseband i9000XXJVT
I am planning to install the [ROM][4.1.1] [1.0.1] RemICS-JB (Team RemICS)
Is there any special way or just the regular way of putting in the SD card and then going into CWM and flashing it.
Please advise on this thanks
I did this just last night, from an I9000XXJVU baseband.
Installing was a bit of an issue for me, from recovery i had to wipe user data, cache and dalvik then flash the rom, as the instructions say, then it wouldnt boot. Went back into recovery and wiped the user data, cache and dalvik again and then the phone booted and ran the RemICS-JB 4.1.1 [1.0.1]. Once it was running it all worked fine EXCEPT i had no cellular network connection at all, after leaving the phone on for over an hour.
I didnt get a chance to verify if the wifi worked as i didnt have any access points available.
Good luck amd hope all goes well for you
From GB its important, to flash Rom after all wipes and reboot recovery ... then you get the right cmw .. and then flash again
the JB-Rom ...
It´s the same way like form GB to ICS ... flash and reboot recovery ... without reboot recovery you can`t boot
hope it works ..
Alright so here's what i have done
I first flashed to [ROM]MIUI.4.I9000 it actually turned off the recovery. Then installed the recovery app from playstore.
Then flashed the CM 10 and before flashing it automatically installed recovery V5 on phone.
Then I flashed the REMICS and this installed recovery V6 on phone.
I have to say this is the best ROM i have ever seen the speed is awesome and very nice features on the JB.
There's one thing I have noticed some of the graphics animations are not working as I have seen on the other JB phones.
However still this ROM is brilliant and I am planning to get a tab running with JB.
Thanks for your inputs on this.
Updated 4.25.13
the solution is very simple.just format the sd card and everything should be fine.thanks for everyone who helped me
Hi guys
this is my first post and I hope you guys can help me,I already searched the forum for similar problem but no luck
I installed Ultimate_N7000_LSZ_JB_4.1.2_v5.2 ROM and it was perfect for the 1st day then I realized that my phone keep restarting on its own when the screen is off,sometimes at 30 mins interval or even more.the phone don't show the boot screens.the screen will always be off when this happens.I also noticed that this doesn't happen when my phone is charging
another problem I'm facing is at times when i try to unlock my phone it stays black for a while until it can respond
a third problem is when I unlock my phone it will show in the status bar the message "sd card was removed unexpectedly" and then say "preparing sd card" .then it won't show the contents either in the gallery or the music player but I can still access them from file explorer
sometimes when it restarts i get a code on the status bar instead of the service provider (pic provided)
before I installed this Rom I was on official JB UAE version which I flashed using Odin and then I rooted my phone using PhilZ-cwm6-JPLSB-UAE-4.89.4
I wiped everything before installing it,Full wipe /data/factory reset /cache and dalvik.Format /data /system and /preload
please help me urgently
test with the SD card removed.. also try another battery... the code could be the code of the provider and name not being displayed.. if all ok go back to stock rom after all wipes and formats and test again
nokiamodeln91 said:
test with the SD card removed.. also try another battery... the code could be the code of the provider and name not being displayed.. if all ok go back to stock rom after all wipes and formats and test again
Click to expand...
Click to collapse
before I installed this ROM I had no problem at all.the only problem I had was draining battery and wakelocks
I'll try using it without the sd card
but what about the restarts???????
not sure. i have used that rom for a while and didnot face that problem.. are yu sure you did not have that restart issue when on stock rom? try flashing another rom will check if the downloaded rom has issues or not..
I'm sorry but I'm new to all of this.this is my 1st ROM ever
so I can flash any official JB ROM through Odin on top of this custom ROM after wiping everything? and then install the custom ROM again?
nokiamodeln91 said:
not sure. i have used that rom for a while and didnot face that problem.. are yu sure you did not have that restart issue when on stock rom? try flashing another rom will check if the downloaded rom has issues or not..
Click to expand...
Click to collapse
I'm 100% sure i didn't have that problem before.
Yes. After flashing the stock rom, you will need to root it and get CWM. best will be to flash Philz kernel to root it.. then you can get back to custom rom again..
before you flash the stock rom boot into recovery (Philz recovery)
- Choose Wipe Data > Clean before install a new rom. (this will clean the rom. and phone will not boot after this step as there will be no rom)
- Advanced > reboot download > connect to pc and use odin to flash the rom
nokiamodeln91 said:
Yes. After flashing the stock rom, you will need to root it and get CWM. best will be to flash Philz kernel to root it.. then you can get back to custom rom again..
before you flash the stock rom boot into recovery (Philz recovery)
- Choose Wipe Data > Clean before install a new rom. (this will clean the rom. and phone will not boot after this step as there will be no rom)
- Advanced > reboot download > connect to pc and use odin to flash the rom
Click to expand...
Click to collapse
so if i flash an official Rom i'll lose the root?
does it matter what official JB ROM i use?
should I use the same Philz Kernel I used before to root the phone?or there is a better version?
Yes after flashing using odin you will loose root. Flash Philz kernel for JB close to the rom you installed like DDLSC or XXLSZ
The reason for your problems could be a defective sd card. Does the error persist without the card?
Sent from my revived Galaxy Note
Seems like ur sd card is dead. You can also try a clean install of the new rom LT4 since it is a bit better than all the previous crappy jb release =)
thank you guys
I removed my sd card since yesterday,and since then everything is fine.no restarts or battery drainage.the ROM works like a charm
I'll try to format it and see what happens. unless it's corrupt for good
I really appreciate ur help.big thanks :good:
Thanks again for ur great help
the problem is completely solved,I formatted my sd card and everything is working fine.the ROM is awesome.better battery life and very smooth
THANKS
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Problem fixed!!
after i hv installed samsung kies, odin can detect my phone!
Everything is fine now!:laugh:
kclam730 said:
Hi all,
give some information first.... at the beginning, i used rom manager to flash clockwork recovery 6.0.1.2, later i hv flashed cm10.1 rom, but i found that the resolution has some problem, so i want to flash back to stock rom... And then i go to this site http://forum.xda-developers.com/showthread.php?t=1901191, to install PhilZ-cwm6 (which is safer for installing stock rom?? i dont know).... After i hv applied the zip in the recovery mode, i found that i cant boot into the system (btw i hv wipe data and cache)
besides, i hv tried odin v1.87, but my pc cant connect with my phone (in download mode)...
what can i do Is my phone bricked?
Sorry for my poor English.
Thank You Guys!!
Click to expand...
Click to collapse
For the future:
Philz kernel is used for TouchWiz ROM's (based off what samsung gives us). You flashed a TW kernel onto a CM 10.1 ROM. If you still want to try out CM, then boot into recovery, do a full wipe, flash CM and gapps. After that is done perform a data wipe (factory reset) through recovery
Hey guys. I've been using CyanogenMod on my Galaxy S for quite a long time. Few days ago my battery died and phone wouldn't pass the CyanogenMOD logo. I've decided to go back to stock rom and then upgrade to one of the new roms.
So I flashed the stock rom using Odin 3.07, rooted, went to recovery mode and tried to flash: Mackay ROM, Beast ROM ( black and white as well as beastxl), Avatar ROM, Slim Bean, Tsunami, CyanogenMOD but none of the above worked.
It starts the installation and after few seconds phone restarts itself and gets stuck on new boot logo.
The only thing that gets installed is the CWM which won't let me do the factory reset, wipe data, wipe dalvik cache etc. Keeps saying can't mount /data, /cache, /system.
The only time I can do factory reset is when I install stock rom.
I only succeeded installing Franzy ROM once but after reboot gets stuck on boot logo.
Sometimes even the stock ROM is giving me issues like process com.android.phone has stopped unexpectedly (does it for dialer, calculator, market, launcher)
Another weird thing is that even when I go back to stock rom and open up for instance a picture with bright background or web browser I can see transparent battery and CyanogemMod in the middle of the screen even tho phone's not charging and running on stock rom not CyanogenMod.
I think I've tried everything from fixing permissions, flash and re-partition using Odin and 512 pit file.
Even rang my Mom like advised in xda's video, didn't help either
Is there anything else I can try to get my phone in "shape"?
Any suggestions?
AllUsernamesAlreadyInUse said:
Hey guys. I've been using CyanogenMod on my Galaxy S for quite a long time. Few days ago my battery died and phone wouldn't pass the CyanogenMOD logo. I've decided to go back to stock rom and then upgrade to one of the new roms.
So I flashed the stock rom using Odin 3.07, rooted, went to recovery mode and tried to flash: Mackay ROM, Beast ROM ( black and white as well as beastxl), Avatar ROM, Slim Bean, Tsunami, CyanogenMOD but none of the above worked.
It starts the installation and after few seconds phone restarts itself and gets stuck on new boot logo.
The only thing that gets installed is the CWM which won't let me do the factory reset, wipe data, wipe dalvik cache etc. Keeps saying can't mount /data, /cache, /system.
The only time I can do factory reset is when I install stock rom.
I only succeeded installing Franzy ROM once but after reboot gets stuck on boot logo.
Sometimes even the stock ROM is giving me issues like process com.android.phone has stopped unexpectedly (does it for dialer, calculator, market, launcher)
Another weird thing is that even when I go back to stock rom and open up for instance a picture with bright background or web browser I can see transparent battery and CyanogemMod in the middle of the screen even tho phone's not charging and running on stock rom not CyanogenMod.
I think I've tried everything from fixing permissions, flash and re-partition using Odin and 512 pit file.
Even rang my Mom like advised in xda's video, didn't help either
Is there anything else I can try to get my phone in "shape"?
Any suggestions?
Click to expand...
Click to collapse
try to flash stock rom again via odin , root , then flash cm 9 ( to not loose you IMEI ) , then flash CM 10.1 stable from here : http://get.cm/?device=galaxysmtd&type=stable
then install any costum rom you want
The Tox said:
try to flash stock rom again via odin , root , then flash cm 9 ( to not loose you IMEI ) , then flash CM 10.1 stable
then install any costum rom you want
Click to expand...
Click to collapse
Thanks for your reply. Installing CM 9 worked but trying to install CM 10 throws up this error:
assert failed: run_program("tmp/updater.sh") == 0
E: Error in sdcard/cm-10.1.zip
(Status 7)
Installation aborted.
Flash this one :
http://get.cm/get/3Fb
then install this one :
http://get.cm/get/9aJ
Thanks for your help. CM 9.1.0 installs fine, same error for 10.1.2 :/
AllUsernamesAlreadyInUse said:
Thanks for your help. CM 9.1.0 installs fine, same error for 10.1.2 :/
Click to expand...
Click to collapse
did you tried to install other costum roms , like slimbean ?
There MIGHT be a problem with your internal SD card. Slight chance :/
did you tried to install other costum roms , like slimbean ?
Click to expand...
Click to collapse
Yes I did and only Franzys installed successfully but then stopped working after phone reboot.
There MIGHT be a problem with your internal SD card. Slight chance :/
Click to expand...
Click to collapse
I think that might be the case. I get encryption unsuccessful with my sdcard in and CWM doesn't see any files with sdcard out.
I found an article here on forum that explains how to use your external sdcard as the internal one. Will give it a try and see if it works.
For now I don't mind using CM 9.1.
Thanks for your help guys and let me know if you have any other suggestions.
Hi! I have a problem with my Ace (s5830, rooted) My phone can't boot in if i switch off, and i want to switch on. It freeses at the samsung logo...
But if i boot into CWM (ver 5.0.2.4) and i choose 'reboot system now' it boots in fine and working.... How can i fix it? My rom is CM 10.2 modded by Mardon.
Do you use some script to mount ext4 partition like app2sd? I had the same problem when I installed app2sd and now I use link2sd and everything works great.
marciba said:
Hi! I have a problem with my Ace (s5830, rooted) My phone can't boot in if i switch off, and i want to switch on. It freeses at the samsung logo...
But if i boot into CWM (ver 5.0.2.4) and i choose 'reboot system now' it boots in fine and working.... How can i fix it? My rom is CM 10.2 modded by Mardon.
Click to expand...
Click to collapse
Try to do a full wipe and flash it again. Did you flash something with the rom (scripts or anything else)?
I have the same problem, but only when using Mardon's CM10.2
I wiped the phone numerous times completely and tried different roms, even going so far as to unroot and back to stock using Odin, and the phone turns off and back on and boots fine with those, but with CM10.2 if I turn the phone off, I have to enter CWM and then reboot in order for it to load the ROM.
yes of course
patafian1 said:
Do you use some script to mount ext4 partition like app2sd? I had the same problem when I installed app2sd and now I use link2sd and everything works great.
Click to expand...
Click to collapse
well i have a 128 mb ext-3 partition but i'm using Link2SD app...........
Benalimarwan said:
Try to do a full wipe and flash it again. Did you flash something with the rom (scripts or anything else)?
Click to expand...
Click to collapse
it doesn't solve my problem
My problem only with 4.3.x ROMs
paradoxiumwind said:
I have the same problem, but only when using Mardon's CM10.2
I wiped the phone numerous times completely and tried different roms, even going so far as to unroot and back to stock using Odin, and the phone turns off and back on and boots fine with those, but with CM10.2 if I turn the phone off, I have to enter CWM and then reboot in order for it to load the ROM.
Click to expand...
Click to collapse
well my ace botts in normally if i use android 4.2.x and lower but i have the problem with every 4.3.x rom i think it's a bootloader error....