Database Develop

EMUI 3.0 B609 with no errors for Vodafone CUST P7

Hi,
I managed to install B609 over a Vodafone (Romania) cust firmware. Before i installed B609 from B133 with some errors: Huawei_Cust_Failed etc, Defect reminder raport was present in Notifications, Motion Control did not work
Latest version from Vodafone Romania was B129 with some bugs and battery drain verry fast; memory load for standbay was aprox 70% etc
I have fund a easy metod to update to full version of B609 without errors, huawei_cust_failed, and surprise Motion Control is working
Please follow this steps:
1. Update to B133 by Local Update -> dload -> update.app (Download form here)
2. Flash this Update to modify your Cust Version and then you cand flash a stock firmware without problems (Local Update -> dload -> update.app) (Download form here)
3. Update now to B609 (full version) by Local Update (Local Update -> dload -> update.app) (Download form here)
*3: ATENTION: do NOT try upgrade to B609 if u dont have at least B133!!!
4. After update please check if Motion Control is working and perform a Factory Reset
5. Enjoy!
PS: if you are already to B609 and you have that errors (cust failed, motion control, etc) you must rollback/downgrade to B133
For this, you must make a backup for data, format card, create a dload folder, copy inside the update.app from pct 1
Force update by power off the phone, and keep press Vol Buttons (both) and Power until you see the Recovery menu
Or follow http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277/page2
PS2: if you whant to go back to you Vodafone orginal Firmware, please search for Hungary Huawei support and download B129 from there or u can try here

How to root B609?

migueli2 said:
How to root B609?
Click to expand...
Click to collapse
Translate from Huaweiblog:
http://www.huaweiblog.de/firmware/root-fuer-emui-3-0-auf-dem-ascend-p7/
Sent from my HUAWEI P7-L10 using XDA Premium HD app

migueli2 said:
How to root B609?
Click to expand...
Click to collapse
http://forum.xda-developers.com/asc...p7-l10-609-t3003605/post58191974#post58191974

majcomtech said:
http://forum.xda-developers.com/asc...p7-l10-609-t3003605/post58191974#post58191974
Click to expand...
Click to collapse
I'm guessing that's a tutorial for advanced users?
And still don't know how to do it.

Gaugen good job .Thank you

Update from B135 Israel
gaugen said:
Hi,
I managed to install B609 over a Vodafone (Romania) cust firmware. Before i installed B609 from B133 with some errors: Huawei_Cust_Failed etc, Defect reminder raport was present in Notifications, Motion Control did not work
Latest version from Vodafone Romania was B129 with some bugs and battery drain verry fast; memory load for standbay was aprox 70% etc
I have fund a easy metod to update to full version of B609 without errors, huawei_cust_failed, and surprise Motion Control is working
Please follow this steps:
1. Update to B133 by Local Update -> dload -> update.app (Download form here)
2. Flash this Update to modify your Cust Version and then you cand flash a stock firmware without problems (Local Update -> dload -> update.app) (Download form here)
3. Update now to B609 (full version) by Local Update (Local Update -> dload -> update.app) (Download form here)
*3: ATENTION: do NOT try upgrade to B609 if u dont have at least B133!!!
4. After update please check if Motion Control is working and perform a Factory Reset
5. Enjoy!
PS: if you are already to B609 and you have that errors (cust failed, motion control, etc) you must rollback/downgrade to B133
For this, you must make a backup for data, format card, create a dload folder, copy inside the update.app from pct 1
Force update by power off the phone, and keep press Vol Buttons (both) and Power until you see the Recovery menu
Or follow http://forum.xda-developers.com/ascend-p7/general/reverting-emui-3-0-to-2-3-t2934277/page2
PS2: if you whant to go back to you Vodafone orginal Firmware, please search for Hungary Huawei support and download B129 from there or u can try here
Click to expand...
Click to collapse
Please tell me, if I'm on B135 Israel can I go from step 2 or should I downgrade to B133 and follow the guide from the first step ?
BTW, the link posted on step 1 is death.
Thanks

I'm on VDF RO and already have B609 with the above mentioned bugs except the motion control which I fixed it by copying hw_motion_config.xml to /data/cust/xml.
Anyway, will your version work if I update it over my B609?

if u have a custom room (brand versionof android from vodafone, telekom etc) please follow this steps. maybe for a phone who doesen`t have a cust room from an operator will work without stepts 1 and 2 but i don`t guarantee
first u must roll back to B133 (stept 1), and flash the Cust Version from step 2. that cust version from step 2 allow u to flash B609 without errors.

Will a simple flash of B133 over B609 do the trick (rollback)?
le: sorry, didn't pay much attention to what you wrote in "PS"... Still, will a force update work?

The B133 link is down Can I use any B133, or does it have to be a special one?

Wait a minute. The CUST fix does a factory reset? It might be valuable information to some... what is worse is that it completely erases the internal memory. Including photos and everything else (my Xiaomi Mi3 doesn't do that, my Galaxy Nexus doesn't...). I did a Titanium Backup before doing the updates, but didn't move all the files to the PC (same with photos). Now everything is gone.
Thank you, Huawei! There was no warning, nowhere, that this would happen, and it is not normal behavior for Android... (from my experience at least).

kadajawi said:
The B133 link is down Can I use any B133, or does it have to be a special one?
Click to expand...
Click to collapse
Update the link pls
Where to download B133 (tested and working version, i don't want to brick my phone)?

What exactly is this update you used in step 2? The update.app is just about 18K und if I open with huwei update extractor I see no cust.img. There are only crc.img, curver.img, efi.img, md5rsa.img, vendor.img and verlist.img.
Where is that file from and what does it?
Greetings

migueli2 said:
I'm guessing that's a tutorial for advanced users?
And still don't know how to do it.
Click to expand...
Click to collapse
Have you unlocked your bootloader yet?

[GUIDE][H60-12] Bootloader unlock & change stock roms 5.1.1 <> 4.4.2

!!! I used all methods yesterday (08th october 2015) and they worked.!!!
Device: Huawei H60-L12
Bootloader: Stock&locked
Rooted: No
Initial ROM version: 5.10.1 Developer (EMUI3.1)
I dont guarantee for other Honor 6 versions than L12 , but I supposed that:
a. changing ROMs could works on L02 using L02 roms
b. bootloader unlock could works on all rooted Honor 6.
Used (FULL VERSIONS) ROMs :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE, will be used as intermediate ROM between different stock ROMs.
View attachment 3501118
CHANGE THE ROM VERSION
( thanks to user Giannichedda for the ideea)
EMUI3.1=Android 5..5.1
EMUI3.0=Android 4.4.2
1. Change the ROM from 5.1.1 developer/Stable to any 5.1 Stable/Developer or 4.4.2 .
USE FULL VERSION ROMs!!!
A. From 5.1.1 Developer to 5.1.1 Stable
a. Write on SDcard the H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE.
b. Update from phone (Local Update)
c. Write on SDcard 5.1. Stable Rom
d. Update from phone (Local Update)
B. From 5.1.1 Stable to 5.1.1 Developer
a. Write on SDcard the H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE;
b. Update from phone (Local Update);
c. Write on SDcard the 5.1. Developer Rom;
d. Update from phone (Local Update).
C. From 5.1 (Stable or Developer) to 4.4.2 .
Be awere to make backup first , because all data, programs or personal files will be deleted.
a. Write on SDcard the H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE;
b. Update from phone (Local Update);
c. Write on SDcard the 4.4.2 ROM;
b. Update from phone (Local Update);
e. after reboot a message will apear on the screen:
f. press (4 times I think) OK till message disappear :
g. chose Reset to factory settings ( any other version will gain no results):
h. Confirm pressing YES button
g. Phone will be reseted to the factory settings of Android 4.4.2. ROM version.
D. From 4.4.2 to 5.1.1. (Stable sau Developer)
a. Write on SDcard the ROM 5.1.1. (Stable sau Developer);
b. Update from phone (Local Update).
Q: What meens Write on SDcard the ROM?
A: Write into Root of a microSDCard, the dload folder containing the UPDATE.APP file ,from a full ROM.
Bootloader code find and unclock
( thanks to user ohluva for the info)
It is necessary to have a rooted phone. If you have it skip to step 4.
It is up to you how you root the phone, but I used iRoot.
1. At this moment the phone should be on Android 4.4.2. ( to root a phone with locked bootloader).
2. Download @ Install iRoot software on PC .
View attachment iRoot_1.8.5.15285_cid1005_7337ba1e.zip
3. Connect the phone to PC and root it with iRoot.
4. After root, copy & install honorTuner.apk on the phone.
View attachment honorTuner.zip
5. Start honorTuner application, accept it superuser access
6. Navigate to Hardware info menu.
7. Your bootloader code is at WVLOCK .
View attachment 3501098
8. Use this code & HONOR_6_and_6Plus_Multi-Tool, to unlock the bootloader.
Post your results.

Is there any option to root the 5.1.1 stable?

As I know and I tried, you have to have bootloader unlocked to root.

DO Not USE iROOT!
1. Downloadpage is on google blacklist
2. iroot...exe got 17/54 by virustotal.com
I would love to get root without unlocking bootloader, but it looks not to be this way !!!
(I did not run this ****, so it "could" work but you dont know what its doing)

Use a good Antivirus software. I use Kaspersky Internet Security. Talking about the home page, except the Google warning ( Android is a Google product and must warn a software when this try to access android protection) , Kaspersky didn't get warning during download, instalation or running the iroot. It is up to you where you download it from. And most important thing, after you get the code you will put 5.5.1. ROM and loose the root made by iroot and root again with other method. The goal is to get the code not to keep the iroot root.
L.E. I attached the setup file.
View attachment iRoot_1.8.5.15285_cid1005_7337ba1e.zip

this is great!! the only way to get a chinese version boot loader unlock code reliably!
Thanks heaps
---------- Post added at 07:23 AM ---------- Previous post was at 07:23 AM ----------
oh and I used a manual root flash of super SU to avoid any virus detection issues

badmania98 said:
As I know and I tried, you have to have bootloader unlocked to root.
Click to expand...
Click to collapse
My bootloader is already unlocked. Any tips to get it rooted?

Use HONOR_6_and_6Plus_Multi-Tool.
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060

versd said:
[/COLOR]oh and I used a manual root flash of super SU to avoid any virus detection issues
Click to expand...
Click to collapse
how did you do this?
---------- Post added at 05:40 PM ---------- Previous post was at 05:35 PM ----------
badmania98 said:
Use a good Antivirus software. I use Kaspersky Internet Security. Talking about the home page, except the Google warning ( Android is a Google product and must warn a software when this try to access android protection) , Kaspersky didn't get warning during download, instalation or running the iroot. It is up to you where you download it from. And most important thing, after you get the code you will put 5.5.1. ROM and loose the root made by iroot and root again with other method. The goal is to get the code not to keep the iroot root.
L.E. I attached the setup file.
View attachment 3501699
Click to expand...
Click to collapse
not getting better with this:
https://www.virustotal.com/en/file/...07caafd6a41522498b5833d3/analysis/1444750615/
I did trust virustotal on all my programs and never had a problem with any android tool yet. So its just my opinion and no one has to share it.

awasome , wow , its working smoothly from 5.1 to 4.4.2 OR 4.4.2 to 5.1.1 . thank u very much sir.

atarifreak said:
how did you do this?
---------- Post added at 05:40 PM ---------- Previous post was at 05:35 PM ----------
not getting better with this:
https://www.virustotal.com/en/file/...07caafd6a41522498b5833d3/analysis/1444750615/
I did trust virustotal on all my programs and never had a problem with any android tool yet. So its just my opinion and no one has to share it.
Click to expand...
Click to collapse
Unlock the bootloader, then use the multitool to sideload supersu. I used to use kingroot, but it doesnt work on lollipop.

Please add the following links or rom links in the first topic post. It is for downgrading from 5.1.1 to 4.4.2 on H60-L04 international version.
Tested and working!
- First get B500 rom (downgrade package) : http://download-c.huawei.com/download/downloadCenter?downloadId=47725&version=101112&siteCode=my
- Then get B396: http://download-c.huawei.com/download/downloadCenter?downloadId=39923&version=71550&siteCode=my
Source: http://www.carbontesla.com/2015/07/downgrade-honor-6-b507-lollipop-to-b380-kitkat-firmware/
I had my device rooted and unlocked when i did this downgrade but i don't think it's needed to be.

@westlandmb
The main ideea of this topic is to unlock the bootloader of L12, not to downgrade all H60. Thanks for understanding.

I tryed a lot of times but every times during installation the phone stop the process (look in emui's site to find the correct rom...ecc..ecc.)
I have H60-L12 whit emui 3.1 developer rom 5.16.10, i would like to change in to stable rom B532.
I do:
I write on sd H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE
Go to UPDATE > LOCAL UPDATE > GO = ok it work
Go to sdcard, take of H60-L02-L12_EMUI3.1开发版回退包 DOWNGRADE and paste stable rom(B532)
Go to UPDATE > LOCAL UPDATE > GO = it stop around 10%.
Anybody can help me? Thanks

Download again the B532 full rom. Could be corupt file.
Try to format the microSD card.
If it doesnt work put 5.10.1 developer and after that use intermediate rom and B532.

badmania98 said:
Download again the B532 full rom. Could be corupt file.
Try to format the microSD card.
If it doesnt work put 5.10.1 developer and after that use intermediate rom and B532.
Click to expand...
Click to collapse
Ok! I just re-download the full rom this time from emui's site, and everything went fine! thanks!
B532 is much better than developer's rom!

I have a strange problem. In the Updater menu I do not have any option to select Local Update. Am I missing something or ??

Look here:
1.
2.
3.

badmania98 said:
!!! I used all methods yesterday (08th october 2015) and they worked.!!!
----------
----------
It is necessary to have a rooted phone. If you have it skip to step 4.
It is up to you how you root the phone, but I used iRoot.
1. At this moment the phone should be on Android 4.4.2. ( to root a phone with locked bootloader).
2. Download @ Install iRoot software on PC .
View attachment 3501700
3. Connect the phone to PC and root it with iRoot.
4. After root, copy & install honorTuner.apk on the phone.
View attachment 3501107
5. Start honorTuner application, accept it superuser access
6. Navigate to Hardware info menu.
7. Your bootloader code is at WVLOCK .
View attachment 3501098
8. Use this code & HONOR_6_and_6Plus_Multi-Tool, to unlock the bootloader.
Post your results.
Click to expand...
Click to collapse
Hi, my phone is:
Device: Huawei H60-L12
Bootloader: Stock&locked
Rooted: No
Initial ROM version: 4.4.2 (EMUI3.0) B317
no way to have it rooted by iroot attached to your post
as said in step 3.
any suggestion?
thanks.

You can try another computer, or a newer version of iroot. But it should work because I did it. Also, you can try other pc software to root the phone. From October till now they should be able to root this phone. I have to mention that when I root my phone, it had no application installed on it. Only stock ROM. I think you do something wrong during the root process. Pay attention to the iroot and phone screen messages.

[Index] Collection of Mate S firmware, recovery, kernel, links (downloads and more)

Welcome to a central place where you can download all kinds of firmware versions for the Mate S
I will try to add more versions once they become available. Enjoy fast and uncapped download speeds here since some of them are terribly slow on the Huawei website.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: I am not responsible for anything that may happen to your device!​An update guide (document) is also included within the download (zipped file).​
Some stuff explained
Finding model number: 1. check your retail box OR 2. go to settings -> about phone (first line)
Different ''cust'' (customizations): C185=Africa/Middle-East, C432=European, C636=Asia, CC900=GLOBAL version.
Meaning of all cust numbers: for instance, CUSTC432D003 = CEE&Nordic European Region, European, West Europe click here for all numbers
Entire firmware number explained: an example CRR-L09C432B145CUSTC432D003
CRR = abbreviation for Mate S [device]
L09 = model number [extremely important!]
C432 = region number [in this case Europe]
B145 = build number [normally higher=more recent]
CUSTC432D003 = customization number [can vary with each update, includes region specific settings and apps]
Finding your vendor country info: (dial) *#*#2846579#*#* - tap option vendor country [hw/eu(EU C432), hw/meafnaf(Mid-east & Africa Afrika C185), hw/spcseas(Asia-Pacific C636)]
How to install: using full firmware and stock recovery
Method 1
1. Create a folder named dload in the root of the internal memory of your device or SD-card.
2. Extract the UPDATE.APP file from the downloaded (firmware) archive into the dload folder (do not rename).
3. Go to settings->updater->menu->local update and tap on update to start the process.
Method 2
1. Create a folder named dload in the root of the internal memory of your device or SD-card.
2. Extract the UPDATE.APP file from the downloaded (firmware) archive into the dload folder (do not rename).
3. Turn off the phone. Press both volume keys, hold them and then press and hold the power key until it starts the recovery.
4. Phone will recognize update.app file and can start the process .
Method 3
1. Create dload folder in the root of the internal memory, or SD-card.
2. Extract UPDATE.APP to dload folder on your phone.
3. Open the dialer and dial *#*#2846579#*#* - then select Software Upgrade -> SDCard Upgrade.
Official Firmware CRR-L09 (European version)
CRR-L09C432B321 Stable Marshmallow [6.0/EMUI4.0] - download from: Huawei server || Mirror
OLD [Lollipop]
CRR-L09C432B114 FULL [5.1.1 Lollipop EMUI3.1] - download from: Huawei server || Mega.nz
CRR-L09C432B145 FULL [5.1.1 Lollipop EMUI3.1] - download from: Huawei server || Google Drive
CRR-L09C432B145 OTA [5.1.1 Lollipop EMUI3.1] - download from: Google Drive || Mega.nz
CRR-L09C432B303 OTA BETA [6.0 Marshmallow EMUI4.0] - download from: Google Drive || Mega.nz
Note: B145 required; flash beta at your own risk!
Official Firmware CRR-L00/TL00/UL00/CL20/UL20 (Asian versions)
Telecom (CRR-CL00)
CRR-CL00 [EMUI3.1 5.1] B172 FULL - download from: Huawei Server
Dual 4G (CRR-UL00)
CRR-UL00 [EMUI3.1 5.1] B172 FULL - download from: Huawei Server || Mega.nz
Mobile (CRR-TL00)
CRR-TL00 [EMUI3.1 5.1] B145 FULL - download from: Mega.nz
CRR-TL00 [EMUI3.1 5.1] B172 FULL - download from: Huawei Server || Mega.nz
Dual 4G 128GB (CRR-UL20)
CRR-UL20 [EMUI4.0 6.0] C185B355 FULL - download from: Huawei Server
CRR-UL20 [EMUI3.1 5.1] B172 FULL - download from: Huawei Server || Mega.nz
Telecom 4G 128GB (CRR-CL20)
CRR-CL20 [EMUI3.1 5.1] B172 FULL - download from: Huawei Server
Roll Back from EMUI4.0 to EMUI3.1 B300 (only for Asian versions)
CRR-CL00_EMUI4.0_to_EMUI3.1_B300 - download from: Google Drive || Mega.nz
CRR-TL00_EMUI4.0_to_EMUI3.1_B300 - download from: Google Drive || Mega.nz
CRR-UL00_EMUI4.0_to_EMUI3.1_B300 - download from: Google Drive || Mega.nz
How to: Roll Back from 6.0 to 5.1 (CN)
1. Download and unzip the upgrade package.
2. Copy the dload folder including the UPDATE.APP file to the root of your SD card
3. Turn off your phone and press and hold both volume keys [hold] and press and hold power key.
4. Phone enters recovery mode and detects update file now confirm to update.
5. Reboot and now install (flash) a full lollipop rom (preferably B172).
Recovery
Stock Recovery [CRR-L09B114] - download from: Google Drive
TWRP 2.8.7.0 [custom] - download from: dl.twrp.me || Google Drive
Unofficial firmware/custom roms
Nothing here (yet..)
Offical kernel source (for developers only)
CRR-UL00/L09 [5.1.1 Lollipop] - download from: Huawei server || Google Drive
Other
Xposed on EMUI 3.1 and 4.0 [thread]
EMUI downloads China [website]
Huawei Mate S global support [website]
Huawei Hi suite device manager [download]

Very useful thread. Nice job!
I have two questions:
1. I have the L09 version with the B114 rom. Why I haven't received OTA update to B145?
2. Are there any news from Huawei about the release date of the stable Marshmallow?
Sent from my Huawei Mate S using Tapatalk

zan. said:
Very useful thread. Nice job!
I have two questions:
1. I have the L09 version with the B114 rom. Why I haven't received OTA update to B145?
2. Are there any news from Huawei about the release date of the stable Marshmallow?
Sent from my Huawei Mate S using Tapatalk
Click to expand...
Click to collapse
Thanks very much but Same here I have CRR-L09C900B131 why do i also not have an ota update to B145 and is it safe for me to manually update it? should i?

zan. said:
Very useful thread. Nice job!
I have two questions:
1. I have the L09 version with the B114 rom. Why I haven't received OTA update to B145?
2. Are there any news from Huawei about the release date of the stable Marshmallow?
Click to expand...
Click to collapse
omniajet13 said:
Thanks very much but Same here I have CRR-L09C900B131 why do i also not have an ota update to B145 and is it safe for me to manually update it? should i?
Click to expand...
Click to collapse
OTA doesn't always work for whatever reason. However, you can still manually update to more recent firmware versions. Simply download the correct one, copy it to your phone and hit upgrade via the updater in settings. If your phone is unbranded and your model number matches the update file you should be able to update safely. Always make sure the model number of the firmware matches to the one of your device. For instance, my phone (L09) came with B110 and I manually updated to L09-B145 without any problems or whatsoever.
Stable Marshmallow doesn't have a set release date yet, but they were aiming for Q2 2016 as far as I know. Shouldn't take that long anymore I guess.

abaggie said:
OTA doesn't always work for whatever reason. However, you can still manually update to more recent firmware versions. Simply download the correct one, copy it to your phone and hit upgrade via the updater in settings. If your phone is unbranded and your model number matches the update file you should be able to update safely. Always make sure the model number of the firmware matches to the one of your device. For instance, my phone (L09) came with B110 and I manually updated to L09-B145 without any problems or whatsoever.
Stable Marshmallow doesn't have a set release date yet, but they were aiming for Q2 2016 as far as I know. Shouldn't take that long anymore I guess.
Click to expand...
Click to collapse
ok i downloaded the CRR-L09C432B145 OTA [5.1.1 Lollipop EMUI3.1 ( i have CRR-L09C900B131 currently)
i created a folder named dload in the root of my sdcard and also the root of my internal storage but neither of them is seen when i select the local update option. what am i doing wrong?

omniajet13 said:
ok i downloaded the CRR-L09C432B145 OTA [5.1.1 Lollipop EMUI3.1 ( i have CRR-L09C900B131 currently)
i created a folder named dload in the root of my sdcard and also the root of my internal storage but neither of them is seen when i select the local update option. what am i doing wrong?
Click to expand...
Click to collapse
Download the full version and try again

abaggie said:
Download the full version and try again
Click to expand...
Click to collapse
still not happening. local updater does not see the file on either internal or external storage
do i need to rename the downloaded file?
ignore me i renamed the ota file to update.zip and now it is working. thank you for all your help
---------- Post added at 03:15 PM ---------- Previous post was at 02:57 PM ----------
abaggie said:
Download the full version and try again
Click to expand...
Click to collapse
well i can get the phone to see the file now but on both the ota and full package (both renamed to update.zip, i get the message software install failed . failed to check the update package. please download the package again. reboot system now.
I am now out of ideas
---------- Post added at 03:37 PM ---------- Previous post was at 03:15 PM ----------
abaggie said:
Download the full version and try again
Click to expand...
Click to collapse
after a bit of quick googling it think i definately need custc900 firmware. i found a link to b145 here if anyone is interested.
http://huaweifirmware.com/huawei-mate-s

I don't think that's the case though, because CUST900 is the global one and you should be able to flash all ''cust versions'' on it. Besides, you do not mention an error or whatsoever, which to me seems that the file is not recognized. In other words double check if you did everything correct. You could also try to install it via the stock recovery (of course the update.app should be in the dload folder first). If i'm correct you should be able to go from 900 (global) to 432 (eu), but not the other way around using the stock recovery.

abaggie said:
I don't think that's the case though, because CUST900 is the global one and you should be able to flash all ''cust versions'' on it. Besides, you do not mention an error or whatsoever, which to me seems that the file is not recognized. In other words double check if you did everything correct. You could also try to install it via the stock recovery (of course the update.app should be in the dload folder first). If i'm correct you should be able to go from 900 (global) to 432 (eu), but not the other way around using the stock recovery.
Click to expand...
Click to collapse
error message software install failed . failed to check the update package shall i try b114 first? if i do it via recovery will i lose all my user settings.
nothing works via updater on phone

omniajet13 said:
error message software install failed . failed to check the update package shall i try b114 first? if i do it via recovery will i lose all my user settings.
nothing works via updater on phone
Click to expand...
Click to collapse
I don not think that will help. I think that your device version and your stock recovery simply do not accept another update/firmware version than C900..

abaggie said:
I don not think that will help. I think that your device version and your stock recovery simply do not accept another update/firmware version than C900..
Click to expand...
Click to collapse
I finally figured it out and i was doing something stupid. you were right my cust number has remained the same but i am now on firmware c432b145.
What i did wrong was to rename your download to update.app
What i needed to do, and have now done is extract your download. and found the update.app and then put it into the dload folder on the root of my sd card. and voila! success.
thank you for your patience and perseverance. now eagerly awaiting the official marshmallow update.

I have the new CRR-L09C432B177 OTA extracted.
If sbdy wants it just PM me (Can't post outside links yet)

CRR-UL00 C433B146 (UAE)
http://consumer.huawei.com/ae/support/downloads/detail/index.htm?id=71483

zeroOo90 said:
I have the new CRR-L09C432B177 OTA extracted.
If sbdy wants it just PM me (Can't post outside links yet)
Click to expand...
Click to collapse
have you tried it yet? how is it running?

omniajet13 said:
have you tried it yet? how is it running?
Click to expand...
Click to collapse
works fine for me, but there are no major changes, mainly security updates etc

Can I update my mate s to marshmallow beta?
Because i try to update my phone using B303 and it's keep failed
I'm now on CRR-UL00 C433B146 and want to update it to marshmallow please help!

Majnonha said:
Can I update my mate s to marshmallow beta?
Because i try to update my phone using B303 and it's keep failed
I'm now on CRR-UL00 C433B146 and want to update it to marshmallow please help!
Click to expand...
Click to collapse
Marshmallow hasn't been released yet...there is a Beta version but you would be better to wait for the final version

brumgav said:
Marshmallow hasn't been released yet...there is a Beta version but you would be better to wait for the final version
Click to expand...
Click to collapse
I know but the beta dosen't work with my phone and i want to upgrade to marshmallow beta

Does anybody have a link to this firmware please CRR-UL20C900B112
I have this installed on my 128gb, dual sim version in the UK
Thanks in advance

Majnonha said:
I know but the beta dosen't work with my phone and i want to upgrade to marshmallow beta
Click to expand...
Click to collapse
You really are better off waiting...because if there is a bug that affects u then you can't roll back to Lollipop

Ale-ul00c00b551

Hi. I know, that this is not entirely a new topic, howewer for complete workaround, here is a solution to install B551 chinese firmware. (thanks Sokoban for packages)
1. First install firmware b052 via fastboot.
2. then install firmware b230 via fastboot.
3. install b535 package.
4. then THIS IS THE TRICK: change phone model name by editing build.prop (from: ro.product.model=hi6210sft Change to: ro.product.model=ALE-UL00) -Thanks to Sokkoban
5. IF you registered for beta testing you will receive b551 update via ota. (i dont know if this works for those that doesnt registered at beta testing)
p.s. - now im downloading the update, i will post after downloading is finished.

that would be great! please check if there is a light painting mode on the camera.

here it is:
ALE-UL00C00B551
p.s. i dont manage how to install. Because the local update option doesnt show, and the force update dont work, the service code update just the kernel version updates...

tamaskurti said:
here it is:
ALE-UL00C00B551
p.s. i dont manage how to install. Because the local update option doesnt show, and the force update dont work, the service code update just the kernel version updates...
Click to expand...
Click to collapse
Hello,
I moved to hw/eu B550. But if you want use another way to try install B551 CN
1. Change location to unicomelectric/cn (WIPE)
2. Install B220 via fastboot (WIPE)
3. Use system updater to receive OTA update to B230
4. install and use VPN software like HideMyIP to enter in Huawei account
5. Use System updater to receive OTA update to B535
6. Use my tutorial to recover local update in EMUI 4.0
7. Copy and replace local.prop but write string for B535 firmware
8. And finally try to install B551
I wish you success!

Thanks i will try.

tamaskurti said:
Hi. I know, that this is not entirely a new topic, howewer for complete workaround, here is a solution to install B551 chinese firmware. (thanks Sokoban for packages)
1. First install firmware b052 via fastboot.
2. then install firmware b230 via fastboot.
3. install b535 package.
4. then THIS IS THE TRICK: change phone model name by editing build.prop (from: ro.product.model=hi6210sft Change to: ro.product.model=ALE-UL00) -Thanks to Sokkoban
5. IF you registered for beta testing you will receive b551 update via ota. (i dont know if this works for those that doesnt registered at beta testing)
p.s. - now im downloading the update, i will post after downloading is finished.
Click to expand...
Click to collapse
Great !! Thanks for this!! Do you have installed this update? There are remains special effects in camera - Light painting, etc. from B535?

Please need chinese camera apk, and relative files/folders in system/etc/camera/
i wanna try on eu firmware, thanks.

Unfortunately i didnt have succes with those steps. I got Balong after editing local.prop - and for that the remaining steps doesnt worked.
Note:
- dont forget: this b551 from chinese fw is BETA (Android 6.0)!!! (kernel version from 27. febr.)
- the latest official chinese fw B240 (Android 5.0.1) (kernel version from 23 march) HAS the light painting camera functions.
- Compared the 2 above: the B240 build has more polished options, but beta 535 and probably beta 551 builds has more experimental features. (the commom ones from european fw, but has many more unique features too)

danvo01 said:
Great !! Thanks for this!! Do you have installed this update? There are remains special effects in camera - Light painting, etc. from B535?
Click to expand...
Click to collapse
Yes my friend I installed all Chinese firmware except 551. There are much more best from European firmware. So for me the best firmware for P8 Lite is B240 or B535(Beta 6.0)
This functions didn't present in European firmware
Touch Plus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Driving Mode
Hardware Diagnosis
Camera Functions

sokkoban said:
Yes my friend I installed all Chinese firmware except 551. There are much more best from European firmware. So for me the best firmware for P8 Lite is B240 or B535(Beta 6.0)
This functions didn't present in European firmware
Touch Plus
Driving Mode
Hardware Diagnosis
Camera Functions
Click to expand...
Click to collapse
Thanks, I have installed B535, so I want to know if all great camera features are in B551 too.

Damn... this chineese version is really wonderfull , but why don't we also has same features ? :/

Update to v551 is not working due to changes in software - it said: try to download full update. Maybe is problem in rooted phone? Here on B535 is for me probably everything working so for now i will stay at this version.

sokkoban said:
Hello,
I moved to hw/eu B550. But if you want use another way to try install B551 CN
1. Change location to unicomelectric/cn (WIPE)
2. Install B220 via fastboot (WIPE)
3. Use system updater to receive OTA update to B230
4. install and use VPN software like HideMyIP to enter in Huawei account
5. Use System updater to receive OTA update to B535
6. Use my tutorial to recover local update in EMUI 4.0
7. Copy and replace local.prop but write string for B535 firmware
8. And finally try to install B551
I wish you success!
Click to expand...
Click to collapse
hi, what was the country that you changed your ip? I did everything as you say but when I try to update the system updater not appear to b535 but the B240 ...

velosa said:
hi, what was the country that you changed your ip? I did everything as you say but when I try to update the system updater not appear to b535 but the B240 ...
Click to expand...
Click to collapse
here you are OTA B535:
ALE-UL00C00B535

It is important to use OTA update! DO NOT USE these links!
For that chage you IP to Hong Kong and check for B535

managed to install the B551, but always with the model problem...

velosa,How did you manage to do?

armendeo said:
velosa,How did you manage to do?
Click to expand...
Click to collapse
follow the tutorial Sokkoban

Hi, velosa. I tried to follow the tutorial written by sokkoban, but without succes.
1. I dont have the b220 package, but the b230 via fastboot.
2. I cannot receive b535 via updater, but i have the b535 package so i installed from local update.
3. Editing lines:
a. I modified build.prop to showing ALE-UL00. effect: the b551 ota update appear.
b. I modified local.prop --- BUT: witch lines? all showing b551 to modifying to B535, or what. And after that witch permission to set, because i observed, that the original local.prop has rw - r -r, and the posted by sokkoban rwx - r - , maybe.

tamaskurti said:
Hi, velosa. I tried to follow the tutorial written by sokkoban, but without succes.
1. I dont have the b220 package, but the b230 via fastboot.
2. I cannot receive b535 via updater, but i have the b535 package so i installed from local update.
3. Editing lines:
a. I modified build.prop to showing ALE-UL00. effect: the b551 ota update appear.
b. I modified local.prop --- BUT: witch lines? all showing b551 to modifying to B535, or what. And after that witch permission to set, because i observed, that the original local.prop has rw - r -r, and the posted by sokkoban rwx - r - , maybe.
Click to expand...
Click to collapse
Here is B220 fastboot
About the local.prop
This is for B551
Code:
ro.product.CustCVersion=C00
ro.product.CustDVersion=D001
ro.build.display.id=ALE-UL00C00[B][COLOR="Red"]B551[/COLOR][/B]
ro.build.version.incremental=C00[B][COLOR="Red"]B551[/COLOR][/B]
ro.build.description=ALE-UL00-user 6.0 HuaweiALE-UL00 C00[B][COLOR="Red"]B551[/COLOR][/B] release-keys
ro.build.fingerprint=Huawei/ALE-UL00/hwALE-H:6.0/HuaweiALE-UL00/C00[B][COLOR="Red"]B551[/COLOR][/B]:user/release-keys
ro.confg.hw_systemversion=ALE-UL00C00[B][COLOR="Red"]B551[/COLOR][/B]_SYSTEM
ro.confg.hw_fastbootversion=ALE-UL00C00[B][COLOR="Red"]B551[/COLOR][/B]_FASTBOOT
ro.confg.hw_bootversion=ALE-UL00C00[B][COLOR="Red"]B551[/COLOR][/B]_BOOT
ro.fackInfoForCmccIot=false
Replace bold and colored symbols to B535 with following rights RW- R-- R--

[Official] [Rom] G7-L01 Marshmallow (6.0.1) Pakistan & Middle east

Hi,
Just wanted to share that Emui 4.0 Marshmallow 6.0.1 is available for huawei Ascend G7 L01 Pakistan & Middle east versions.
Build : C185B510CUSTC185D003
File Size : 1.50 GB
Supported Models: G7-L01 Only (Single Sim)
Download Link

anasahmad said:
Hi,
Just wanted to share that Emui 4.0 Marshmallow 6.0.1 is available for huawei Ascend G7 L01 Pakistan & Middle east versions.
Build : C185B510CUSTC185D003
File Size : 1.50 GB
Supported Models: G7-L01 Only (Single Sim)
Download Link
Click to expand...
Click to collapse
Just to clarify, this is for Africa as well. :good:

Is anyone having issues with battery life on B510?
I've found that my device does not go into deep sleep. Google Play Services seems to be the issue, with a Keep Awake time of 5h38m last night. It just started happening these past two days (again). I've had this problem before, but clearing Google Play Services and the Google App's data seemed to solve the problem. This time it doesn't seem to be working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Location services is off at the moment. I just hope this can be solved, because going down from a Screen on time of 8h30m on Lollipop to only 5h on Marshmallow is pretty bad, in my opinion. I don't want to have to turn features off in order for a longer battery life, that I had in Lollipop.
If anyone has any advice, it would be really appreciated. :fingers-crossed:

Battery woes!
Don't know the root cause but you can try these suggestions,
Try factory reset
Switch location to wifi and mobile(battery saving)
Unprotect the apps that are consuming power in battery settings.(apart from mesaging apps)
Also you can prevent apps from keeping system awake in battery settings.
Try greenify app.
Recalibrate the battery!

anasahmad said:
Don't know the root cause but you can try these suggestions,
Try factory reset
Switch location to wifi and mobile(battery saving)
Unprotect the apps that are consuming power in battery settings.(apart from mesaging apps)
Also you can prevent apps from keeping system awake in battery settings.
Try greenify app.
Recalibrate the battery!
Click to expand...
Click to collapse
Thank you for the suggestions. I've tried all of them, besides recalibrating the battery, as I honestly don't think it's necessary.
I should mention that I had a problem with the phone not deep sleeping in Lollipop when I first updated, and clearing Google Play Services, and Google App, data solved the problem. It temporarily solved the problem in Marshmallow as well, but now it's back again.

Alright, so I was getting tired of my battery life being so bad, so I decided to do a factory reset (again). I then only installed the apps that I used most often, and BetterBatteryStats to check my battery life, since I had a feeling it was one of my apps that was going rogue, possibly AccuBattery. My phone was also really slow, and I only had a screen on time of 6 hours, mostly, and that was with my normal usage. My phone is set up exactly the same as before, minus a few apps, and this is the result:
Not too bad, if you ask me ?

Hi,
i have huawei G7 L-01 single sim android 4.4.4
Build : C185B510CUSTC185D001
i cant update to android 6.0.1
help me

alaghbary said:
Hi,
i have huawei G7 L-01 single sim android 4.4.4
Build : C185B510CUSTC185D001
i cant update to android 6.0.1
help me
Click to expand...
Click to collapse
How are you updating? What is your current build number? If you are still on KitKat, you need to update to Lollipop (C185B320), then you will be able to update to Marshmallow.

Gyroscope sensor and Bluetooth works correctly? I have EU version G7-L01. Is upgrade posible?

Yokozum said:
Gyroscope sensor and Bluetooth works correctly? I have EU version G7-L01. Is upgrade posible?
Click to expand...
Click to collapse
Gyroscope does not work, but can be fixed if you have an unlocked bootloader. Bluetooth works as it should.
No, the EU version can not be updated yet.
Sent from my HUAWEI G7-L01 using Tapatalk

update app fail
also fastboot method = size too large
any solutions
g7-l01
runing b320 5.1.1

The_username said:
update app fail
also fastboot method = size too large
any solutions
g7-l01
runing b320 5.1.1
Click to expand...
Click to collapse
You need to give more details for me to help. Marshmallow cannot be flashed via fastboot if you have Lollipop installed.
What is your cust version? If it is anything other than C185, then you will not be able to install B510.
Did you put the update.app in the dload folder on your SD card? Is there enough space on your SD card?
Sent from my HUAWEI G7-L01 using Tapatalk

Sure
miz_pimp said:
You need to give more details for 320 help. Marshmallow cannot be flashed via fastboot if you have Lollipop installed.
What is your cust version? If it is anything other than C185, then you will not be able to install B510.
Did you put the update.app in the dload folder on your SD card? Is there enough space on your SD card?
Sent from my HUAWEI G7-L01 using Tapatalk
Click to expand...
Click to collapse
Update app in load
I have c185b320

The_username said:
Update app in load
I have c185b320
Click to expand...
Click to collapse
You need to copy the dload file to your SD card, not internal memory. That could be the reason the update fails.

Maybe
miz_pimp said:
You need to copy the dload file to your SD card, not internal memory. That could be the reason the update fails.
Click to expand...
Click to collapse
Anyway I have damaged sd tray.
But I did flashed c185b320 already from internal

The_username said:
Anyway I have damaged sd tray.
But I did flashed c185b320 already from internal
Click to expand...
Click to collapse
Marshmallow is bigger, and reformats your internal memory, and system partitions, so although B320 worked, B510 might not.
The only other option I can think of that you can try, is to do a factory reset of your internal memory, then copy the dload folder to your internal memory, and try the update again via 3 buttons. If that still fails, then there's no other option, unfortunately.
Sent from my HUAWEI G7-L01 using Tapatalk

miz_pimp said:
Marshmallow is bigger, and reformats your internal memory, and system partitions, so although B320 worked, B510 might not.
The only other option I can think of that you can try, is to do a factory reset of your internal memory, then copy the dload folder to your internal memory, and try the update again via 3 buttons. If that still fails, then there's no other option, unfortunately.
Sent from my HUAWEI G7-L01 using Tapatalk
Click to expand...
Click to collapse
Yea I'll try factory reset.
And report back
Thx

Last solution
miz_pimp said:
Marshmallow is bigger, and reformats your internal memory, and system partitions, so although B320 worked, B510 might not.
The only other option I can think of that you can try, is to do a factory reset of your internal memory, then copy the dload folder to your internal memory, and try the update again via 3 buttons. If that still fails, then there's no other option, unfortunately.
Sent from my HUAWEI G7-L01 using Tapatalk
Click to expand...
Click to collapse
Htc dongle can do the job thx anyway
For help.

I tried installing it but every time it reboots into my TWRP recovery and does nothing.
my phone is g7-l01C185B320 RUNNING ON ANDROID 5.1.1 & EMUI 3.1. plz help

amr01 said:
I tried installing it but every time it reboots into my TWRP recovery and does nothing.
my phone is g7-l01C185B320 RUNNING ON ANDROID 5.1.1 & EMUI 3.1. plz help
Click to expand...
Click to collapse
You should try installing the stock recovery. If you're flashing via the 3 button method, then it shouldn't really be necessary, but since I'm assuming you're using the 3 button method, and it's still rebooting into TWRP, then flash the stock recovery, just to be on the safe side.