Database Develop

[Q] Please suggest me karnel and ROM

I'm new in all this so I don't have any acknowledge. After 1 year I decided to root it and install something new.
Is there ANY kernel & ROM that will get the maximum potential from ACE S5830 with everything working fine? Or maybe I should ask, which kernel & ROM are the best?
Thank you

palcitigi said:
I'm new in all this so I don't have any acknowledge. After 1 year I decided to root it and install something new.
Is there ANY kernel & ROM that will get the maximum potential from ACE S5830 with everything working fine? Or maybe I should ask, which kernel & ROM are the best?
Thank you
Click to expand...
Click to collapse
Regarding your question of which Rom and kernel is the best, I'd like to draw your attention to THIS post
However, if I had to name my favorite for the SGA, it would be THIS one

Giving answer as an suggestion,
for battery life-stock based
Performance - cm7 based
Both roms will be super stable and working 100% without bugs as they have base of officially supported GB.

please help me
I'm new in all of this and I don't know what do to next, I have samsung galaxy ace S5830 and I tried to do something new but I failed now i can't do anything with him I can only access recovery and that's it, I tried this http://forum.xda-developers.com/showthread.php?t=1537913 but didn't work
gives me errors and fails
What I must do to fix my phone ?
thank you

Download another/latest rom from android development section... Move to SD. (ABOVE STEPS FROM PC/LAPTOP)
Then insert SD to SGA,
Boot to recovery amd install that zip

TheBlackWolf said:
Download another/latest rom from android development section... Move to SD. (ABOVE STEPS FROM PC/LAPTOP)
Then insert SD to SGA,
Boot to recovery amd install that zip
Click to expand...
Click to collapse
can you suggest me which ROM will 100% work on my phone ?
or how to get back on my old phone with old gingerbread 2.3,3
now i can't wipe data/factory reset, wipe cache partition and everything I try goes to error or fail
please hep !
sorry for my english

Droid Ace, Democracy NT, Apocalypse are my favo here.
If you wanna go back to stock.
See installation guide of stock on this forum.

TheBlackWolf said:
Droid Ace, Democracy NT, Apocalypse are my favo here.
If you wanna go back to stock.
See installation guide of stock on this forum.
Click to expand...
Click to collapse
Thank you for information
I like this apocalypse, how to install it ?
just copy to SD card
go to recovery
delete data and cache
and run the update from SD
that's it or ?

palcitigi said:
Thank you for information
I like this apocalypse, how to install it ?
just copy to SD card
go to recovery
delete data and cache
and run the update from SD
that's it or ?
Click to expand...
Click to collapse
Yes!!
Choose zip from SD not update from sd.

TheBlackWolf said:
Yes!!
Choose zip from SD not update from sd.
Click to expand...
Click to collapse
this is awesome thank you very much

RemICS

Hello guys,
i have succesfully flashed the new RemICS rom. It's works fine. When i will install the new addonpack, it's still show the bootanimation. I wait for 30 min but nothing happened. I try it 3 times but nothings change. I come from ICS 4.3. Can anyone please help me out?
And yes... I follow the installation steps.
Rom link: http://forum.xda-developers.com/showthread.php?t=2427514
Thanks,
Marvin
PS: Sorry for my bad english.

Did you try to do a full wipe?
Sent from my GT-I9001 using xda app-developers app

KiLLAH89 said:
ICS 4.3
Click to expand...
Click to collapse
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?

käsebr0t:45552591 said:
Did you try to do a full wipe?
Click to expand...
Click to collapse
Yes everytime i flashed it.
tetakpatak said:
4.3 is Jelly Bean (JB), not ICS (..."I scream sand witch"....) could it be that you 've flashed wrong Gapps version?
Click to expand...
Click to collapse
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.

KiLLAH89 said:
Yes everytime i flashed it.
No, thats not possible, see http://forum.xda-developers.com/showthread.php?t=2427514. I flashed all this yesterday on it's release. Its run now, i install no performance tweaks from the AIO.
Click to expand...
Click to collapse
It is just name of the ROM, and the developer writes you clearly in the first blue field, in the first text line:
Android Base CM10.1.3. RC1 JellyBean
JellyBean is not ICS (ICS is 4.0.x) so you need Gapps for CM10.1x / Android 4.2.x
CyanogenMod 9 is based on ICS

HELP needed for RemICS Odin installation
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:

[email protected] said:
Not sure whether to start a new thread or not so for the sake of making xda a little less cluttered i will first post my query here:
It refers to the RemICS ROM thread already mentioned
http://forum.xda-developers.com/showthread.php?t=2300693
This looks like a great ROM and i would like to do a one time flash using Odin
Are there any install methods using Odin. I see there is a full download on the page but it appears to be for a I9003. Have searched all over and not seen anything as yet
FYI: I am currently running DarkysROM JVQv10.2 Extreme Edition, firmware 2.3.4
Kernel Version 2.6.35.7-I9000XXJVQ-CL281085
thx in advance :good:
Click to expand...
Click to collapse
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD

thx for reply
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Soryuu said:
This isn't meant to be flashed via Odin.
Download the rom + addons + gapps + CM9 (you don't need CM9 gapps). You can download the rom + addons from here: http://forum.xda-developers.com/showthread.php?t=2075058
1.) Backup everything you need to- call logs, SMS, bookmarks, etc with Titanium or other methods of your choice
2.) Reboot into recovery. Perform the three wipe combo (data, cache, Dalvik)
3.) Flash CM9. You'll probably have to flash it twice- once for the kernel, another time for the rom. Let it boot.
4.) Once CM9 has booted, check that you still have reception.
5.) Reboot into recovery again and do the wipe combo. This time choose to flash the base rom. You'll need to flash it three times- once due to the incompatible partition (first flash overcomes this), another time for the kernel, a third time for the rom.
6.) Once the base rom's finished flashing, reboot. Check you still have your IMEI- you'll know if you still have reception.
7.) Reboot to recovery, flash addons (flash Addons then Addons_V1)
8.) Reboot
9.) Back to recovery (AGAIN), flash gapps.
Unfortunately a one-time flash with Odin isn't possible. But the endless flashes you have to do for RemICS V6 is well worth it
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

[email protected] said:
thx for your reply and apologies for getting back to you late.
If only i could do it the way you suggested but for some reason (me) i have messed the phone so that it now no longer is able to mount the external SDCard so putting the relevent zip files on the ext card is useless because in recovery mode using CWM these files fail to show.
I note that via CWM it shows the card as unmounted. If i try and do a mount it fails.
any ideas?
thx
Lawrence
Click to expand...
Click to collapse
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD

Here is where my noob-ness kicks in.
What internal storage is available by default on the Note1? Is it just the internal sdcard?
what puzzled me when I last flashed with odin (repeated it a number of times as I was trying to get the device to recognise ext sd card) to get the current Darky Extreme rom on (which is working fine no problem at all) is that there was still some relic directory structure left over. These were all empty folders visible when navigating within CWM. Didn't matter what type of formatting I did they wouldn't go. To summarise: much confusion and something got twisted.
So questions arising are:
-How to nuke the internal disk/card properly so there are no remnants prior to me doing another darky reinstall?
-Then, how to copy a zip file to internal card but still have it remain after the format and wipes that would precede a zip install?
-How to fix the device to mount the ext sdcard? FYI other sdcards can't be mounted either. I have tried 4 different ones. And here's the kicker-once booted I go to file manager and there I can see and access all the files/folders on the external card!!! So it's definitely a phone problem as opposed to a sdcard problem. Something got flagged along the line.
Rgrds
Lawrence
Soryuu said:
What about your internal storage?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse

Instruction How To Root Stock 4.4 for S4 Active 9295

Hello. I have found too confusing to find right thread about root for s4a 9295. Most threads about root are mixed with i537, so i think separate thread for 9295 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on external sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.

6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9225. Most threads about root are mixed with i537, so i think separate thread for 9225 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on wxternal sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.
Click to expand...
Click to collapse
Many Thanks.............Rooted at last....
I am running the PHN-I9295XXUCNE5-20140527111402 ROM - and the above standing procedure worked for me.
Remember to Choose "No" in step no# 7 otherwise it will not work.

Thank you,
Works for me!!!!!

Unless you have yet another device (9225 ???) ...gsmarena.com has a looot of phone records but none for this.
6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9225. Most threads about root are mixed with i537, so i think separate thread for 9225 regarding it will be good decision.
Click to expand...
Click to collapse
I guess you are contributing to the confusion by starting this thread.
GT-I9220 - Note
GT-I9225 - ????????
GT-I9228 - Note
GT-I9295 - S4 Active

root stock 4.4 for s4 active i9295
6783 said:
Hello. I have found too confusing to find right thread about root for s4a 9295. Most threads about root are mixed with i537, so i think separate thread for 9295 regarding it will be good decision.
Instruction:
1. Install custom recovery via Odin (i use recovery by Mythi, look for the download link in his thread http://forum.xda-developers.com/showthread.php?t=2752469);
2. Donload Superuser zip UPDATE-SuperSU-v1.99r3.zip
3. Copy su.zip to sdcard or internal memory;
4. Download in recovery mode;
5. Choose install zip from sd card (if zip on internal memory) or Choose zip from storage/sdcard1 (if zip on wxternal sd card);
6. Install UPDATE-SuperSU-v1.99r3.zip;
7. After instaling, choose reboot to system, if recovery ask to fix root rights, choose NO;
8. After boot, start super user app and confirm disabling for Knox;
9. Conglaturations, you are rooted.
Click to expand...
Click to collapse
this procedure worked for me, im on i9295 stock 4.4.2
Thanks
Gerardo Mar.

yes it function, thx

I did this also but whit out these instructions... i went to hit yes when rebootting... The phosne is rooted yes, but i can't moun't back up..or flash anything else... does new reboot help???

Okay.. i did everything.. i re-flashed supersu, booted, re-booted and said no to rootfix.. Usb debugging on , and supersu apk setting checked and there is head user allowed..
I tried to make back up again but it did not work.
CWM starts to make back up but on the end it said can´t mount it... if i check my SD card there is back up folder and i think that there is also back up file (size1,95G).
I tried to restore but CWM saids something MD5 file failed...
So i´m rooted but i can´t flash new rom...

Try to reflash via Odin, and then do according to instruction.
Sent from my GT-I9295 using XDA Premium 4 mobile app

Ok i will try that..
Can it be wrong rom what i have tried to flash... supersu flashing was ok, but when i try to flash samsung stock 4.2.2 rom , it does not work...
Do they have different bootloader.
My phone is also encrypted... does it matter?

pasanen said:
Ok i will try that..
Can it be wrong rom what i have tried to flash... supersu flashing was ok, but when i try to flash samsung stock 4.2.2 rom , it does not work...
Do they have different bootloader.
My phone is also encrypted... does it matter?
Click to expand...
Click to collapse
This method is just for 4.4.2
Sent from my ME173X using xda premium

I know.. i'm now 4.4.2. and i'm trying to get back to 4.2.2 stock.

Then just flash 4.2.2 via Odin.
Sent from my GT-I9295 using XDA Premium 4 mobile app

It does not work... if i flash new rom (4.2,2 stock) using odin , flashing procedure stops and fails.. phone gets stucked and only way to get phone working is to flash KK stock firmware back...
So maybe i'm having some issue with the rom... i can' t find any another working. rom.... so i' m dead end.....

pasanen said:
It does not work... if i flash new rom (4.2,2 stock) using odin , flashing procedure stops and fails.. phone gets stucked and only way to get phone working is to flash KK stock firmware back...
So maybe i'm having some issue with the rom... i can' t find any another working. rom.... so i' m dead end.....
Click to expand...
Click to collapse
Hi the problem is that your bootloader is locked and it wont let you go back to 4.2.2 because of that... I read on the forum safetrap take a look on it. This may help you
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
Hi all,
I know rooting with samsung is a bit annoying with flash counter and now knox, but I would like to know if this this method if it activate know or flash counter? As I don't want to lost my warranty.
Thanks in advance

6783 said:
(if zip on wxternal sd card)
Click to expand...
Click to collapse
Just this wxternal!

Jhon998 said:
Just this wxternal!
Click to expand...
Click to collapse
Fixed

6783 said:
Fixed
Click to expand...
Click to collapse
and why ( ; ) instead of ( . )?

Ultiweap said:
Hi the problem is that your bootloader is locked and it wont let you go back to 4.2.2 because of that... I read on the forum safetrap take a look on it. This may help you
---------- Post added at 10:10 PM ---------- Previous post was at 09:56 PM ----------
Hi all,
I know rooting with samsung is a bit annoying with flash counter and now knox, but I would like to know if this this method if it activate know or flash counter? As I don't want to lost my warranty.
Thanks in advance
Click to expand...
Click to collapse
Okay..
I9295 does not have locked bootloader... so i managed to solve my problem..
For some reason i could not to make backup of stock rom so just wiped all and flashed 4.3 slim and configured it and backupped...
I also flashed stock deoxed JB, and now i can get drivelink app to work again.
I also tried to flash safestrap but there was no SS to i9295 so i tried us version SS.
Everything works fine but i could not to make any rom slots.. i did not have enough memory.... but for real there was plenty of memory..
One problem is that every time i try to flash stock jb it soft bricks the phone... kk flash is fine..
Has anyone try to use hemidall???

can someone help
Hello
I have little problem first three stages I have done, but fourth stage I don't understund
4. Download in recovery mode;
does that mean i should go cwm and instal there su.zip or what
flashing via odin went well and i got green pass after flashing. But I dont see cwm anywhere when starting phone recovery, it goes original recovery not cwm.

Have I Bricked my Phone?

I am only just new and have been playing around with this custom rom stuff for a short while now, I have ClockworkMod Recovery v6.0.4.7 on my I9305T. I have tried a few different Roms so far but they don't work. I tried just today "RevolutionaryS5-V3" it obviously went through the installation process but did not boot into it, just came up with the samsung default ( samsung S III GT- I9305T ) logo in white. It disappeared then came back looping that way.
So now I have went into the "Advanced Menu" and then "show log" I don't know if this will help you but, it displayed this:-
ClockworkMod Recovery v6.0.4.7
persist.sys.root_access=1
persist.radio.adb_log_on=1
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
service.adb.root=1
keyguard.no_require_sim=true
telephony.lteOnGsmDevice
mobiledata.interfaces=pdp0,wlan0,gprs,ppp0
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file no
t found...
I:Can't partition non mmcblk device: /devices/pl
atform/s3c-sdhci.2/mmc_host/mmc1
The roms I have downloaded are:- aicp_i9305_lp-10.0-RELEASE-20150708 (this one looped its boot logo), cm-11-20150907-NIGHTLY-i9305 (i have the recovery .img for this), cm-12.1-20150926-NIGHTLY-dogo (i have the recovery .img for this), FlashingDroid_S5_v2.2 and RevolutionaryS5-V3, if these roms are any good for my I9305T, Can anyone give me some advise on what or how to install these roms.
Regards,
Wayne

Something went wrong while flashing rom or maybe the rom data is corrupt.
Bootloop means your device fails to boot if system data is corrupt by flashing rom
You had soft brick.
Reboot into recovery and restore the stock rom if you had nandroid backup.
Sent from my MT27i using XDA mobile app

RevolutionaryS5-V3? that one is not for the i9305 unless i have missed a thread for it. The roms for your phone can be found here http://forum.xda-developers.com/galaxy-s3/development-i9305
but as stated flash stock rom again, flash custom recovery and then choose the rom for your phone

Hey Piyush,
Initially I did try do a Backup using Titanium Backup app, first try I think there wasn't enough room on the internal HDD, so I tried on the external HDD which I thought had done so.. So when I came to this problem, the backup did not work.
Now at first before I rooted the phone. It was done by odin v1.85 and of course it did root. So I know it has superSU, but I can't get onto a stock rom for this phone because of my **** sat internet bandwidth and also a good site to download from. I tried the samsung-update site, but the 2 links don't allow me to finish the download. Do you know of any links that i can download the stock rom for my i9305T my phone was running android v4.3. The link I just stated was for v4.3.
Can you give me some advise on how or what I should do?
Regards,
Wayne
wane72 said:
I am only just new and have been playing around with this custom rom stuff for a short while now, I have ClockworkMod Recovery v6.0.4.7 on my I9305T. I have tried a few different Roms so far but they don't work. I tried just today "RevolutionaryS5-V3" it obviously went through the installation process but did not boot into it, just came up with the samsung default ( samsung S III GT- I9305T ) logo in white. It disappeared then came back looping that way.
So now I have went into the "Advanced Menu" and then "show log" I don't know if this will help you but, it displayed this:-
ClockworkMod Recovery v6.0.4.7
persist.sys.root_access=1
persist.radio.adb_log_on=1
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
service.adb.root=1
keyguard.no_require_sim=true
telephony.lteOnGsmDevice
mobiledata.interfaces=pdp0,wlan0,gprs,ppp0
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file no
t found...
I:Can't partition non mmcblk device: /devices/pl
atform/s3c-sdhci.2/mmc_host/mmc1
The roms I have downloaded are:- aicp_i9305_lp-10.0-RELEASE-20150708 (this one looped its boot logo), cm-11-20150907-NIGHTLY-i9305 (i have the recovery .img for this), cm-12.1-20150926-NIGHTLY-dogo (i have the recovery .img for this), FlashingDroid_S5_v2.2 and RevolutionaryS5-V3, if these roms are any good for my I9305T, Can anyone give me some advise on what or how to install these roms.
Regards,
Wayne
Click to expand...
Click to collapse

The phone was v4.3 before i rooted the phone. Do i need to flash the stock v4.3 rom again or can i use the older v4.2 or newer v4.4 to reflash the recovery?
regards,
wayne
maultasche said:
RevolutionaryS5-V3? that one is not for the i9305 unless i have missed a thread for it. The roms for your phone can be found here http://forum.xda-developers.com/galaxy-s3/development-i9305
but as stated flash stock rom again, flash custom recovery and then choose the rom for your phone
Click to expand...
Click to collapse

I'm not sure if you can downgrade from 4.3 to 4.2 or earlier. If the phone was running 4.3 then I'd install 4.3 or 4.4 to get stock recovery back. Then you can install a custom recovery. No need to root your phone for that.

Do you know a link that will take me to a compatible file for my GT-i9305T, I'm just not sure what to look out for. Also would you be able to give me a quick rundown/instructions on how to do this. Will I need odin, and which version will I need. Currently I have v1.85, that's what I used to start off. I really don't wanna brick this phone.
Regards,
Wayne
maultasche said:
I'm not sure if you can downgrade from 4.3 to 4.2 or earlier. If the phone was running 4.3 then I'd install 4.3 or 4.4 to get stock recovery back. Then you can install a custom recovery. No need to root your phone for that.
Click to expand...
Click to collapse

http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
there you'll find the Kitkat DBT for i9305. Will work with your phone as well. In the OP you'll find instruction on how to install this version via odin. Odin is included in the zip.
After that you put your phone into download mode again and flash the preferred recovery via odin. But don't use TWRP 2.8.7.0 from their site. That build is broken and is getting fixed atm. Either use TWRP 2.8.5.0 or latest Philz Touch. If you decide to flash a custom ROM again, make sure you're in the right forum, e.g. i9305

Thanks heaps for your help so far maultasche, I will let you know how I go with this.
Cheers,
Wayne
maultasche said:
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
there you'll find the Kitkat DBT for i9305. Will work with your phone as well. In the OP you'll find instruction on how to install this version via odin. Odin is included in the zip.
After that you put your phone into download mode again and flash the preferred recovery via odin. But don't use TWRP 2.8.7.0 from their site. That build is broken and is getting fixed atm. Either use TWRP 2.8.5.0 or latest Philz Touch. If you decide to flash a custom ROM again, make sure you're in the right forum, e.g. i9305
Click to expand...
Click to collapse

From backup I actually meant if you had cwm and you did a nandroid backup of the stock rom from the recovery itself.
If you are getting bootloop you can easily fix it by restoring the backup.
Search on the net about recovery from soft brick and bootloops.
Nandroid backups can atleast get your device in running condition.
If you have custom recovery backup your rom first then you can flash any desired rom.
One more thing if you had flashed custom rom do not factory reset your device,this may result in soft brick.
Hope that helps!
Is your device booting now??
Sent from my MT27i using XDA mobile app

Hi Maultasche, how do I send pics from my PC of what's happening on my phone?
Regards,
wayne
wane72 said:
Thanks heaps for your help so far maultasche, I will let you know how I go with this.
Cheers,
Wayne
Click to expand...
Click to collapse

Yes, I successfully got the phone to boot up and run. I used the I9305XXUFNI3_I9305DBTFNI3_I9305XXUFNI3_HOME.tar file using the odin v3.09 and now it has asked the country and so on..
It was a bit daunting thinking if it was going to brick or fix the phone...
Thanks for your help, time and kindness for the files you gave me.
The next couple of days I will try attempt install Cyanogenmod 11. Will I need to use odin to install the recovery image, just like I did for the I9305XXUFNI3_HOME.tar file?
regards
Wayne
wane72 said:
Thanks heaps for your help so far maultasche, I will let you know how I go with this.
Cheers,
Wayne
Click to expand...
Click to collapse

You're welcome, glad it did help.
Yes, you need odin to flash the recovery again. No need to root your phone just to install the recovery, as mentioned. Then you can flash whatever ROM you'd like. One thing - although CM 11 still gets nightlies from time to time there is no maintainer left. He switched devices. If you encounter any issues which might be device related they probably won't get fixed.
Is sending pics on pc still an issue? Sorry, I wasn't online and I forgot to check the thread :/

HI Maultasche, so I have been looking at the" Resurrection-Remix-LP-v5.5.6" rom and have been downloading the files for it, but i am not sure what the "changelog" file is for or what it does. The page - forum . xda-developers.com / galaxy-s3 / development-i9305 / rom-resurrection-remix-4-4-2-kitkat-v5-t2704828 . It tells me I need these Installation Files:- ROM , Gapps & Changelog. Do you know if i can install this Rom using
CWM v6.0.4.7?
Oh, and about the send pic question, I wanted to send you a pic of the odin mode screen from my phone, but the only thing I could see was the "insert image" button. But it wanted me to enter a URL for the picture. Whats the go there?
Regards,
Wayne
maultasche said:
You're welcome, glad it did help.
Yes, you need odin to flash the recovery again. No need to root your phone just to install the recovery, as mentioned. Then you can flash whatever ROM you'd like. One thing - although CM 11 still gets nightlies from time to time there is no maintainer left. He switched devices. If you encounter any issues which might be device related they probably won't get fixed.
Is sending pics on pc still an issue? Sorry, I wasn't online and I forgot to check the thread :/
Click to expand...
Click to collapse

The change log file only shows what has been fixed and what has changed to previous builds. Nothing you need for the ROM
You only need the ROM, gapps and the recovery. Use the recovery rodman has mentioned in his post.
Insert image button? Via Tapatalk? Don't know what you mean to be honest.

Me Again, just above this message box there is the insert image icon. Doh... So now I have spotted the Paperclip icon above and now feel a **** for asking how to send a picture.. Sorry.
So again I thank you for your help, it is much appreciated.
Regards,
Wayne
maultasche said:
The change log file only shows what has been fixed and what has changed to previous builds. Nothing you need for the ROM
You only need the ROM, gapps and the recovery. Use the recovery rodman has mentioned in his post.
Insert image button? Via Tapatalk? Don't know what you mean to be honest.
Click to expand...
Click to collapse

Why won't my phone show up on Odin?

For what? Install lastest Samsung drivers and make sure Kies is not running

Need to install a ROM without a PC
Hi maultasche, Can you help me with this, I have my wife's phone which is a S3 i9305 as well. The USB connection on the phone has been damaged and so the cable can't be connected. I was wondering if I could still install the ROM without the use of a PC. Can you tell me the best software I could do this with? Also I am not sure the best way to back up the phone, not wanting to root it.
Regards,
Wayne

hi,
what ROM youre talking about? Official firmware? If you have a flashable zip yo could do that with flashfire, flashify, rashr etc. Or via custom recovery. For a custom recovery is no root needed.
As for backups depending on what you want to backup (whole system including data etc. or just apps with apps data). Without root your backup options are kind of limited. You can backup apps and app data via helium but not every app can be backed up using this tool. You could do a back up via adb but not sure how complete such a backup will be. I never did that. Or a backup with a custom recovery again. Might be the easiest way.

Getting Nougat onto Samsung GALAXY Tab 8.9 (GT-P7310) running Android 4.0.4

Hello Everyone,
I know this is an old tablet and mine works fine but there are so many apps i cannot run on it because it's so old.
For some reason when I go to recovery (power plus volume down) it only gives me options to install from cache or to install from SD card. My Tab doesn't have an SD card slot and I've tried many different things like putting the Google Apps file in an /sdcard folder but no luck. Maybe I need a better recovery that will allow me to install from OTA USB or from Internal storage, or directly from the PC.
I have never rooted a phone before or unlocked a bootloader, and maybe I'm missing a step, but no matter how many forum posts I check people seem to be able to run it from /sdcard which is simply not working for me.
Please help!

I've got the same issue here, and tried everything, from what you've said you've done to using command lines in adb fastboot, and nothing seem to bring me closer to write on the root of the device. Maybe with both of us asking here someone pops up to bring some light to this.

@saitar
Install the TWRP Recovery 2.8.7.0 or higher.

bescalan said:
Hello Everyone,
I know this is an old tablet and mine works fine but there are so many apps i cannot run on it because it's so old.
For some reason when I go to recovery (power plus volume down) it only gives me options to install from cache or to install from SD card. My Tab doesn't have an SD card slot and I've tried many different things like putting the Google Apps file in an /sdcard folder but no luck. Maybe I need a better recovery that will allow me to install from OTA USB or from Internal storage, or directly from the PC.
I have never rooted a phone before or unlocked a bootloader, and maybe I'm missing a step, but no matter how many forum posts I check people seem to be able to run it from /sdcard which is simply not working for me.
Please help!
Click to expand...
Click to collapse
I don't know if this is still an issue for you, but I went further as nobody seemed to see the post.
I used this TWRP recovery, then flashed the lollipop rom here. But I stopped at the gapps... the only one I was able to flash was this one, but the keyboard isn't showing up. I tried the complete compilation and the flashing failed due to lack of space, although the device was plenty of it...
bierma32 said:
@saitar
Install the TWRP Recovery 2.8.7.0 or higher.
Click to expand...
Click to collapse
Thanks for replying. Yes, this is what I found out reading in xda and other forums, as the recovery I mentioned above is the 2.7.1.0, but is there a 2.8 recovery for the Tab 8.9, or should we be able to update the 2.7 to 2.8 without problems? Edit: I noticed in your post signature you got a 3.0 version on your device... how?

@saitar
Here are the link for TWRP https://forum.xda-developers.com/ga...ev-testing-twrp-galaxy-tab-8-9-p7310-t3469987
You can update your TWRP with the ZIP file from your existing Recovery or with Odin and the *.Tar file.

bierma32 said:
@saitar
Herr are the link for TWRP https://forum.xda-developers.com/ga...ev-testing-twrp-galaxy-tab-8-9-p7310-t3469987
You can update your TWRP with the ZIP file Form your existing Recovery or with Odin and the *.Tar file.
Click to expand...
Click to collapse
You're the man! th tar file didin't work, but I was able to flash the 3.0 TWRP, then flashed the Nougat version and the Gapps. Everything is working fine.
Thanks again!

Nougat update for i957?
Great to see the efforts here, kudos.
A naive question, whether this is going to work on my i957 currently on 4.0.4 ICS? If no, any recommendations for any latest ROM for i957? Being on 4.0.4, a number of apps have started causing issues, support not being available.
If there's another thread I should post on, pls suggest the same.
Thx
Mads

Recover using ODIN n with official firmware
bescalan said:
Hello Everyone,
I know this is an old tablet and mine works fine but there are so many apps i cannot run on it because it's so old.
For some reason when I go to recovery (power plus volume down) it only gives me options to install from cache or to install from SD card. My Tab doesn't have an SD card slot and I've tried many different things like putting the Google Apps file in an /sdcard folder but no luck. Maybe I need a better recovery that will allow me to install from OTA USB or from Internal storage, or directly from the PC.
I have never rooted a phone before or unlocked a bootloader, and maybe I'm missing a step, but no matter how many forum posts I check people seem to be able to run it from /sdcard which is simply not working for me.
Please help!
Click to expand...
Click to collapse
DEAR FRIEND,
recover your Tab using ODIN apk in PC.
install the Odin 1.13 or upto u at odindownload. COM
enter the recovery mode - Downloading
insert this firmware At NERDSCHALK WEBSITE using keyword on google ROM SAMSUNG TAB 8.9 FIRMWARE
follow the step of using ODIN ,
u will your phone flashed into that ORIGINAL version.
I HOPE IT WILL HELP YOU.
REGARD JIU-JITSAN