Database Develop

[Q] Root SGS I9070 DDLK2

Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls

Одг: [Q] Root SGS I9070 DDLK2
vidyamit said:
Hi All - very new to the forum an very new to Android. I have SGS I9070 DDLK2 (i am from India). Airtel is the provider.
I have been going thru the forum and tried to root the SGS, with the method in the below link:
h t t p: / / techdraginfo . blogspot . com / 2012 / 10 / how-to-root-samsung-galaxy-s-advance
After that i installed the SU and Busybox from Google Play, but on my SU log's it reads - Binary outdated? i tap to update the update being, get error "no root access".. the busybox too i am unable to install (symfile is selected) its gives error "boot recovery" and the install fails. BUT i have both SU and Busybox in my application list? Is my phone rooted ?
I do not want to upgrade to JB, need GB only. as the software that i have will work only on 4.0.x... i need help from the forum to guide me on how to gain complete root access on I9070 with BG as OS... I am very novice at all this - was able to root as there were screen shots in the link that i used for rooting my SGS I9070.
Would appreciate your help... pls pls
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance

shut_down said:
http://forum.xda-developers.com/showthread.php?t=1660419
Read first two posts carefuly. If you have problem making kernel for step 10, tell me to do it.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...

vidyamit said:
Thank you for a quick reply. This is the same method i used to root my phone. As i have DDLK2 i went ahead and used the xxld1.tar.md5. after this i downloaded the SU and Busybox? Its the error's i have in SU and Busybox isnt getting installed?
Can you help me with the kernel ?
Thanks in advance...
Click to expand...
Click to collapse
Download your stock firmware from www.sammobile.com/firmware or http://samsung-updates.com/tag/firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.

shut_down said:
Download your stock firmware from w w w . s a m m o b i l e . c o m / f i r m w are or h t t p : / / s amsung-updates . c o m / t ag / firmware/ and attach me kernel.bin.md5 from that file. I will repack it for step 10. You can post that on that thread for rooting, maybe someone else needs it. And it will be easier to find there, then here on this one.
Click to expand...
Click to collapse
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...

vidyamit said:
Thank you. I am Downloading: I9070DDLK2_I9070ODDLJ1_INU.zip (sammobile)
once the download is done will share the kernel.bin.md5. Would you need anything else do let me know. I truly appreciate your help...
Click to expand...
Click to collapse
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.

shut_down said:
Just that. After that you will repeat all from that guide for rooting. And by this method you increase binary counter. Triangle away can reset it now for our phone.
Click to expand...
Click to collapse
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?

vidyamit said:
Ok, i downloaded the I9070DDLK2_I9070ODDLJ1_INU.zip from SAMMOBILE
i have a ZIP file and it has 2 contents
1) I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 - 700MB file
2) SS_DL.dll - 2.76 MB fiile
I tried to extract the I9070DDLK2_I9070ODDLJ1_HOME.tar.md5 and i get is the same file again I9070DDLK2_I9070ODDLJ1_HOME.tar.md5.
How do i get kernel.nib.md5 ?
Click to expand...
Click to collapse
Oops ! i had to 7zip the file..:victory:
Here you go Sir...

vidyamit said:
Oops ! i had to 7zip the file..:victory:
Here you go Sir...
Click to expand...
Click to collapse
Here, just unzip it. And use for step 10.

shut_down said:
Here, just unzip it. And use for step 10.
Click to expand...
Click to collapse
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:

vidyamit said:
Thank you soooo much. I really appreciate your help.. one last thing, let me know if the below steps are correct:
i will follow the link that you gave me to root
will download GT-I9070-root.rar, will extract ODIN
will enable USB debugging and mock location on the phone
turn off the phone and put it on download mode
Under PIT file browse for GT-I9070_EUR_XX_8G_20111220_KL6.pit, you have extracted this file before.
Under PDA choos rootkernel.tar.md5
Then check what options are checked (Selected), be sure to UNCHECK (remove selction) Re-Partition, Flash Lock, Phone EFS Clear, Phone Bootloader Update! Only Auto Reboot and F.Reset Time should be checked (Selected)
When this is set just press Start and wait for phone to reboot
Now repeat steps from 4 to 9, with one exception at step 7 I will CHOOSE THE FILE THAT YOU REPACKED FOR ME....
let the phone boot
Install SU / Busybox and Traingle away....
and i will be done - pls let me know.... :fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.

Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM

Shaaan said:
Op : so you mail me, i give you the method and you make a new thread? I mean what the fcuk?
:annoyed:
I do not respond to tech support via PM
Click to expand...
Click to collapse
No - I posted in XDA, one was kind to reply. He also helped me with the Kernel.... i am just following his step by step instructions... I never made any thread... Pls read thru the entire thread...

shut_down said:
... And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.

R_a_z_v_a_n said:
Can you give more details? Eventually links from Google Play with that Superuser?
Thanks a lot
PS: I use SuperSU now and I think that is not so fine.
Click to expand...
Click to collapse
I use SuperSU on JB now, but on GB I didn't have root access when I used it (didn't work at all). No need to change.
LOL, you can easy find it. Here.
Need to uninstall first SuperSU.

Huh, thinking I use an wrong application , but from what I read, chainfire (SuperSU) update released more than chainsDD tuned, and that's why I asked more details about that.
Here what i read: http://forum.xda-developers.com/showthread.php?t=1704441

shut_down said:
I think you even do not need to use pit file. Yes, that is it. And install Superuser, no SuperSU. I think we had problems with SuperSU, and Superuser worked fine.
Click to expand...
Click to collapse
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..

vidyamit said:
Hi - i did follow the steps, and also flashed your kernel, but guess its its creating some issues? unable to download Superuser, WIFI is hanging upp and also unable to make calls... any help pls..
Click to expand...
Click to collapse
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?

shut_down said:
I know there are issues when you do not go back to stock kernel. You are sure you flashed this stock one I give you?
Click to expand...
Click to collapse
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((

vidyamit said:
Yes - very much? I am resetting the device as of now... Was able to install the Superuser but wasnt working properly...
i restarted the phone - was able to do calls... so that is a breather... now as i told i am restoring factory settings... and it is at the Android screen where i touch it and start configurations.... now what next (((
Click to expand...
Click to collapse
So now everything works fine? Install app superuser from play store, open it and find in options update binary. You will have it I think when you go in left once.

Need Note 4 T-Mobile PIT file

Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.

cchong4 said:
Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.
Click to expand...
Click to collapse
I asked a while ago and no one had. Tried to pull it myself and failed. Good luck
BAD ASS NOTE 4

Full file name?
Do you have the whole file name?

jarazmek said:
Do you have the whole file name?
Click to expand...
Click to collapse
It not a file you can pull from a file explorer.
BAD ASS NOTE 4 + BAD ASS GEAR S

cchong4 said:
Just recently purchased a Note 4 off craiglist but didn't check if the firmware was genuine (my mistake), As I tried to root the device it stated its missing the PIT partition. Does anyone by any chance have these files? I also tried reflashing stock rom to see if that would fix the issue but the same issue comes up.
Click to expand...
Click to collapse
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0

Airtioteclint said:
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0
Click to expand...
Click to collapse
Thanks! I was just about to comment on this saying that I didn't think we could still pull the .pit file from these phones, lol. If you don't mind me asking, how did you get ahold of this? I would like to know just for future knowledge just incase I run into something on another phone.

147aaron said:
Thanks! I was just about to comment on this saying that I didn't think we could still pull the .pit file from these phones, lol. If you don't mind me asking, how did you get ahold of this? I would like to know just for future knowledge just incase I run into something on another phone.
Click to expand...
Click to collapse
dd if=/dev/block/mmcblk0 of=/sdcard/(name).pit bs=1 skip=17408 count=2396
The count number is the length in bytes. 2396 is the size of my note 10.1 so I used it again here as they should be the same

Could someone PLEASE share the PIT file? I'm having an /efs issue so need this to factory wipe.
Thank You
Fas

No pit file can be pulled from this phone.
BAD ASS NOTE 4

Did you try this?
I want you to create or build your own “PIT” Re-Partition Table file using PIT Magic app, please grab it forum.xda-developers.com-thread-1916936 and then Create New PIT Files from scratch as the PIT Magic can control them and we can see the contents. Using a PIT data partition when flashing is something risky as it targets the system memory, one messed up the system memory could lead-up to undesirable outcomes, so that is why I want you to build your PIT file own, so when something might went wrong its your own creation.
Once you have your own Pit file, then proceed into flashing. Again make sure the battery is fully charge (recharge the battery using external battery charger or borrow from your neighbors Galaxy Note 4)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910W8.pit Pit file on Odin’s PIT Button
3. Load your original stock firmware on the Odin’s PDA button.
4. Click on “Start” to flash the stock firmware and PIT file then wait.

southphillysean said:
Did you try this?
I want you to create or build your own “PIT” Re-Partition Table file using PIT Magic app, please grab it forum.xda-developers.com-thread-1916936 and then Create New PIT Files from scratch as the PIT Magic can control them and we can see the contents. Using a PIT data partition when flashing is something risky as it targets the system memory, one messed up the system memory could lead-up to undesirable outcomes, so that is why I want you to build your PIT file own, so when something might went wrong its your own creation.
Once you have your own Pit file, then proceed into flashing. Again make sure the battery is fully charge (recharge the battery using external battery charger or borrow from your neighbors Galaxy Note 4)
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910W8.pit Pit file on Odin’s PIT Button
3. Load your original stock firmware on the Odin’s PDA button.
4. Click on “Start” to flash the stock firmware and PIT file then wait.
Click to expand...
Click to collapse
AWESOME, I'll give it a shot. Thank You. We had them all for Note 3 (The CP/AP and BL files but can't find them for this phone. I'm having the Factory Mode on issue that stems from a bad/missing or corrupt /efs partition so trying to find a fix. I'll check it out and report back. +1!
Fas

faslane said:
AWESOME, I'll give it a shot. Thank You. We had them all for Note 3 (The CP/AP and BL files but can't find them for this phone. I'm having the Factory Mode on issue that stems from a bad/missing or corrupt /efs partition so trying to find a fix. I'll check it out and report back. +1!
Fas
Click to expand...
Click to collapse
Definetly let us know
BAD ASS NOTE 4

BACARDILIMON said:
Definetly let us know
BAD ASS NOTE 4
Click to expand...
Click to collapse
Just fixed my Factory Mode issue. I restored ONLY the EFS from a nandroid backup I had in TWRP. Hit restore, navigate to twrp/backups select the rom of like kind (Mine was from late 2014 even but same KK rom) and then restored ONLY the EFS file and rebooted. Factory Mode error gone and it automatically connected to wifi as per usual/norm which is one of the things this Factory Mode specifically mentions. All good!!!
Fas

Airtioteclint said:
Don't know if you still need it but here you go. Hope it helps somebody.
https://www.dropbox.com/s/uuzxds728f1ffam/Airtioteclint-n910t.pit?dl=0
Click to expand...
Click to collapse
hi friend. can you repost this? been going crazy looking for this. thankyou

PIT file
Hello Airtioteclint or whoever has the PIT file,
Sorry to bother you but I've searched all ends of the interweb and I can not for the love of me find that pit file for the SM-N910P. I was wondering if you can repost that file because I've been trying to flash my phone for the past 3 days now. It would be much appreciated and in return just name it. I will do everything in my power to return the favor. Thank you.

I know this is an old thread but if someone should happen to come across it here's a link to all the pit files from sammobile, hopefully this helps someone
https://www.sammobile.com/forum/showthread.php?t=30022

PIT file for Galaxy G920T TMOBILE (ROM)-G920T_OC3_Stock_Restore

WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
The file is not a suitable version 5.1.1

You do realize this is the 920T section, not the 925T?

update

SHATTAH said:
I know what I wrote and I tried it
it is only for g925T not g920T
Click to expand...
Click to collapse
Then you should probably go post it in the g925T section.

ops....
You're right
I did not see where I publish
I move it there now

:crying::cyclops::good:
Lol on this thread........

jeffreylin_ said:
You should also remove the link in the OP so that people don't accidently flash it.
How did you extract the PIT? I don't seem to have any luck doing so on my G920T.
Click to expand...
Click to collapse
OK
Within a few hours I also raised the PIT for G920T

SHATTAH said:
OK
Within a few hours I also raised the PIT for G920T
Click to expand...
Click to collapse
Do you have the pit file for the 920t?

Fightoffyoredeamons said:
Do you have the pit file for the 920t?
Click to expand...
Click to collapse
It looks like the OP did get it for us.
Check his last reply, and then look at the last time he edited the first post.

SHATTAH said:
OK
Within a few hours I also raised the PIT for G920T
Click to expand...
Click to collapse
Did you dump the pit or make the pit with pit magic? If it's dumped can you please tell us how because we need the three different storage sizes for every variant.

Anyone have this please? Trying to return my s6 back to stock with my Mac

SHATTAH said:
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...dONG56UlBrd2s1eVZocmY0YzQ3a00&usp=sharing_eid
Click to expand...
Click to collapse
Does someone have another link? Can't seem to get this to download.

Cummins4 said:
Does someone have another link? Can't seem to get this to download.
Click to expand...
Click to collapse
Count yourself lucky you cant. He hasn't stated what storage size this is made for and doesn't seem interested in replying to questions. He probably made it with pit magic and you could do the same. I looked into it and it looks easy enough but it would take quite a while to make one so I decided not to since I personally don't need it. It is very important that storage size matches your phone otherwise your 128gb phone could turn into a 32 or the reverse (you wouldn't gain any space but You would get data corruption).

ThePagel said:
Count yourself lucky you cant. He hasn't stated what storage size this is made for and doesn't seem interested in replying to questions. He probably made it with pit magic and you could do the same. I looked into it and it looks easy enough but it would take quite a while to make one so I decided not to since I personally don't need it. It is very important that storage size matches your phone otherwise your 128gb phone could turn into a 32 or the reverse (you wouldn't gain any space but You would get data corruption).
Click to expand...
Click to collapse
Thanks, I'll look into it tonight. Not sure if this will help my situation, not like I can break it, my phone is useless as is. Just figured there would be a way back as long as you could get into download.

Hello need a pit file for G920T Please help where can i download ?
---------- Post added at 05:10 PM ---------- Previous post was at 05:07 PM ----------
Cummins4 said:
Does someone have another link? Can't seem to get this to download.
Click to expand...
Click to collapse
Your Link is Not Working Bro No File Found

jrock79 said:
Anyone have this please? Trying to return my s6 back to stock with my Mac
Click to expand...
Click to collapse
Try using Samsung Kies.

Need some advice

Okay guys I think I've exhausted all of my options here's the short version of what's going on. I started the OTA update on my s5 and it got interrupted ( I don't really know how ) and it won't go past the Samsung boot screen (and it now says custom with an unlocked pad). After doing extensive research and downloads I can get the phone into Odin mode and into recovery mode. I tried flashing the stock rom, down grade roms and kernels of all variants through Odin and through recovery with no luck . Odin fails at secure system check and stock recovery says failed to find /system build.prop (no such file or directory). Viewing the recovery log It says my os is (oc4) and my bootloader is (oi5) no help from Samsung or AT&T. In Odin I am able to flash the oc4 kernel, modem and stock partitions. It says current binary SAMSUNG official system status custom Knox warranty void 0x0
Any advice would be greatly appreciated.

If anybody could help or is willing please let me know

Cam Shaft08 said:
If anybody could help or is willing please let me know
Click to expand...
Click to collapse
Try flashing this rom it is uploaded by muniz_ri
androidfilehost
. com
/
?fid=24052804347848936
it is oi5 it will pass secure check try it
it helped me with same problem

syedrazaabbas said:
Try flashing this rom it is uploaded by muniz_ri
androidfilehost
. com
/
?fid=24052804347848936
it is oi5 it will pass secure check try it
it helped me with same problem
Click to expand...
Click to collapse
I'm down loading it now. If it is the same one that has been up it won't work because I need an md5 and it will not sideload. I have to odin flash an md5.

Cam Shaft08 said:
I'm down loading it now. If it is the same one that has been up it won't work because I need an md5 and it will not sideload. I have to odin flash an md5.
Click to expand...
Click to collapse
make it odin flashable by using any tar.md5 program and then flash it the required files i do the same

syedrazaabbas said:
make it odin flashable by using any tar.md5 program and then flash it the required files i do the same
Click to expand...
Click to collapse
What program do you recommend

Cam Shaft08 said:
What program do you recommend
Click to expand...
Click to collapse
kindly tell me which files do you required i will convert and upload it for you

syedrazaabbas said:
kindly tell me which files do you required i will convert and upload it for you
Click to expand...
Click to collapse
Modem, kernel, recovery, stock partition. Basically I am trying to flash the rom in md5 section. Unless you want to convert the whole rom to md5 flashable for me.
Thank you for all of your help.

Cam Shaft08 said:
Modem, kernel, recovery, stock partition. Basically I am trying to flash the rom in md5 section. Unless you want to convert the whole rom to md5 flashable for me.
Thank you for all of your help.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0BzQYyLb6zJczbE9SY0k5UVljMWs/view?usp=sharing
here are the files you are asking each file is seperate use AP button for boot and recovery and CP button for modem and Non-hlos
cheers

syedrazaabbas said:
https://drive.google.com/file/d/0BzQYyLb6zJczbE9SY0k5UVljMWs/view?usp=sharing
here are the files you are asking each file is seperate use AP button for boot and recovery and CP button for modem and Non-hlos
cheers
Click to expand...
Click to collapse
I am downloading them now. Thank you so much for all of your help. I will let you know what happens!! You have been a huge help.

OK I flashed all of those files with no errors. All 4 took perfect. Still stuck though. Could you upload the system file? An .md5 system file. I think it's system.ext4 when I watch odin flash. Thank you again for all your help.

Bump

Cam Shaft08 said:
Bump
Click to expand...
Click to collapse
hi sorry for the late as i was out of town so i will convert and upload the system.ext4 soon as it is a big file it need some time to upload dont worry will upload it today

syedrazaabbas said:
hi sorry for the late as i was out of town so i will convert and upload the system.ext4 soon as it is a big file it need some time to upload dont worry will upload it today
Click to expand...
Click to collapse
No need to be sorry. I understand you have a life outside of xda . I'm trying to be as patient as I can its just that I miss my phone

Cam Shaft08 said:
No need to be sorry. I understand you have a life outside of xda . I'm trying to be as patient as I can its just that I miss my phone
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers

syedrazaabbas said:
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers
Click to expand...
Click to collapse
Awesome!!! THANK YOU!!!!!!!!!

syedrazaabbas said:
https://drive.google.com/folderview?id=0BzQYyLb6zJczdDhQS2hyTXpMQ0E&usp=sharing
here you go
step 1 : Download all 14 parts according to order and put them into a new folder
step 2 : download winrar and install it if you already have skip it
step 3 : open part 1 in winrar and extract it , it will auto detect all 14 parts
finally you will have the file , it took me so many hours to upload the full file .
Cheers
Click to expand...
Click to collapse
This is what I keep getting.

Cam Shaft08 said:
This is what I keep getting.
Click to expand...
Click to collapse
try to fresh your bootloader oi5
https://www.androidfilehost.com/?fid=24052804347851013
then after flashing this try the file again I hope it will help again

syedrazaabbas said:
try to fresh your bootloader oi5
https://www.androidfilehost.com/?fid=24052804347851013
then after flashing this try the file again I hope it will help again
Click to expand...
Click to collapse
It didn't work. Do you have any other suggestions or do you knew how to or can upload the kernel md5, modem md5, recovery md5, or can you do the full rom? Sorry to be such a pain but I just don't know what else to do. Ya know getting any help around is like pulling teeth.

Cam Shaft08 said:
It didn't work. Do you have any other suggestions or do you knew how to or can upload the kernel md5, modem md5, recovery md5, or can you do the full rom? Sorry to be such a pain but I just don't know what else to do. Ya know getting any help around is like pulling teeth.
Click to expand...
Click to collapse
hey syedrazaabbas im having the exact same problem. i flashed the files you kindly provided and same problem wont flash the system file. Im pretty compident with programs and phones so if there is a program i can use i will make a .tar.md5 oidin file myself if it is posible to do. thanks again, sorry i also searched and searched. it seems as if the att S5 section of XDA is a ghost town, i know it can be over whelming at times (i know im a mechanic and deal with my fair share) but i dont beleve in not helping if i have the means to do so.
Tom

//SM-G920A\\ **Full Odin Restore G920AUCU3BOJ7**

Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
BL_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ym275gsx2bxa2c9/G920AUCU3BOJ7_Recovery.rar?dl=0

JUSMEJOSE said:
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
BL_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ym275gsx2bxa2c9/G920AUCU3BOJ7_Recovery.rar?dl=0
Click to expand...
Click to collapse
THANK YOU

Any body flashed this ? Whats the battery life on this ? Is it better than OI2 firmware?
Sent from my SAMSUNG-SM-G920A using Tapatalk

Great share JUSMEJOSE !!
Really useful for those who need it
Just wondering what's the difference between _LOW_ ship.tar.md5 and _MID_ ship.tar.md5 versions? Is there a _HIGH_ ship.tar.md5 too?
BillA

Can I flash this from any previous version? I bought a used phone on 5.0.2 rooted but want to just flash newest firmware... Don't care about root. Can I use these files?

joho5 said:
Can I flash this from any previous version? I bought a used phone on 5.0.2 rooted but want to just flash newest firmware... Don't care about root. Can I use these files?
Click to expand...
Click to collapse
Yes. It will nuke you to out of the box clean though, so backup whatever you want to keep.
Sent from my XT1526 using Tapatalk

joho5 said:
Can I flash this from any previous version? I bought a used phone on 5.0.2 rooted but want to just flash newest firmware... Don't care about root. Can I use these files?
Click to expand...
Click to collapse
Did you flash it joho5. I have the same G920A, 5.0.2 of4 firmware, rooted. And want to flash this stock. But i worry about flash this stock will bootloop.

kembacha said:
Did you flash it joho5. I have the same G920A, 5.0.2 of4 firmware, rooted. And want to flash this stock. But i worry about flash this stock will bootloop.
Click to expand...
Click to collapse
I flashed this from rooted OF4. No issues. See my comments a couple posts ago.
Sent from my XT1526 using Tapatalk

Can you use Odin to go back on my AT&T S6 running 5.1.1 with build G928? My hope is that I can revert back and then root my phone... Is that possible?
Thank you in advance for your help!!

bwinters1969 said:
Can you use Odin to go back on my AT&T S6 running 5.1.1 with build G928? My hope is that I can revert back and then root my phone... Is that possible?
Thank you in advance for your help!!
Click to expand...
Click to collapse
No
Sent from my XT1526 using Tapatalk

So AT&T released G920AUCU3BOJ9 this month, and I was wondering if anyone had these files... Anyone? I can't OTA because I have partial root from that SamFirm kernel

permantly locked
hello,
i have the g920aucu3boj7. i wanted to country unlock it from at&t and i received the unlock code and the de-freeze code but the problem is both are not working,i heard if you enter the incorrect code many times the mobile will be permanently locked.is this true ?
if i restore it with this firmware will the code work then ?
thankyou.

Links Dead!!!
Hello, can you please re-upload the files cause the links on you first post are dead...Thanks

pikolush said:
Hello, can you please re-upload the files cause the links on you first post are dead...Thanks
Click to expand...
Click to collapse
https://www.dropbox.com/s/r8r5630q26wg34h/G920AUCU3BOJ7_Recovery.rar?dl=0

My model number is same 925A but the build number is different itz OCE.. what will be the problem if I flash the rom to my OCE device ??

JUSMEJOSE said:
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
BL_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ym275gsx2bxa2c9/G920AUCU3BOJ7_Recovery.rar?dl=0
Click to expand...
Click to collapse
Hey man! Thanks for the files!....I have one problem when I place all files in Odin..it fails because it saying something about get PIT files.

marcbsmoove said:
Hey man! Thanks for the files!....I have one problem when I place all files in Odin..it fails because it saying something about get PIT files.
Click to expand...
Click to collapse
only the file AP

JUSMEJOSE said:
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
BL_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ym275gsx2bxa2c9/G920AUCU3BOJ7_Recovery.rar?dl=0
Click to expand...
Click to collapse
the link is dead, can you help please?

JUSMEJOSE said:
Hey what's up xda! Here is the a full Odin tar files from This will completely restore from any issues that you might have with your device or you want just want to restore for any reason ....
**Make sure you add each file to its correct area**
AP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
BL_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CP_G920AUCU3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
CSC_ATT_G920AATT3BOJ7_CL5927475_QB6773820_REV02_user_low_ship.tar.md5
https://www.dropbox.com/s/ym275gsx2bxa2c9/G920AUCU3BOJ7_Recovery.rar?dl=0
Click to expand...
Click to collapse
Edit: nevermind it is reposted several posts up. Thanks for the file!
-Mike

Hi, anyone have BOJ9 odin tar file? Thank you in advance!