This is my patch that replaces your current Adreno EGL Graphics libraries with the new ones.
It will boost your 3D performance remarkably.
It is based on original update that appeared on several sites dealing with android tuning but
the exact original source is still unknown to me. Anyway, libraries seem to work properly.
This patch will automatically append all the necessary settings into your existing /system/build.prop file
even if they are probably not necessary for libraries to work. But anyway, just to be sure.
It will not modify your existing settings in your build.prop in any way. It will just add a new section that can be easily
removed if desired.
THIS PATCH IS FOR GINGERBREAD ROMS ONLY THAT DON'T HAVE IT APPLIED YET (ASK YOUR ROM MAINTAINER TO FIND OUT). APPLYING THIS PATCH ON ANY OTHER ANDROID VERSION (ICS, JELLYBEAN) WILL PUT YOUR DEVICE IN A BOOTLOOP
I strongly encourage you to make a backup of your current ROM in recovery before aplying this patch!!!
It may happen that new libs will not work with your ROM at all (CM7 and CM9 are questionable) and you may
easily end up with your phone not booting after aplying this patch!!! I will not provide support to anyone ignoring the step
of making the backup! Backup is essential because in case of any problems you can easily revert back to your previous state.
Download: http://tinyw.in/IB0D ( MIRROR )
MD5 Checksum: 509402fb4bbbe0c2292abdca02f3846a
Screenshots: http://ceco.sk.eu.or...creenshots/gpu/
Installation instructions:
1) Download the ZIP file to your SD card
2) Reboot to recovery
3) Make a backup of your current ROM using menu Backup and Restore / Backup
4) Choose from menu: install zip from sd card / choose zip from sd card Find ZIP in filesystem structure
5) Confirm to flash
6) Reboot
taimur272 said:
This is my patch that replaces your current Adreno EGL Graphics libraries with the new ones.
It will boost your 3D performance remarkably.
It is based on original update that appeared on several sites dealing with android tuning but
the exact original source is still unknown to me. Anyway, libraries seem to work properly.
This patch will automatically append all the necessary settings into your existing /system/build.prop file
even if they are probably not necessary for libraries to work. But anyway, just to be sure.
It will not modify your existing settings in your build.prop in any way. It will just add a new section that can be easily
removed if desired.
THIS PATCH IS FOR GINGERBREAD ROMS ONLY THAT DON'T HAVE IT APPLIED YET (ASK YOUR ROM MAINTAINER TO FIND OUT). APPLYING THIS PATCH ON ANY OTHER ANDROID VERSION (ICS, JELLYBEAN) WILL PUT YOUR DEVICE IN A BOOTLOOP
I strongly encourage you to make a backup of your current ROM in recovery before aplying this patch!!!
It may happen that new libs will not work with your ROM at all (CM7 and CM9 are questionable) and you may
easily end up with your phone not booting after aplying this patch!!! I will not provide support to anyone ignoring the step
of making the backup! Backup is essential because in case of any problems you can easily revert back to your previous state.
Download: http://tinyw.in/IB0D ( MIRROR )
MD5 Checksum: 509402fb4bbbe0c2292abdca02f3846a
Screenshots: http://ceco.sk.eu.or...creenshots/gpu/
Installation instructions:
1) Download the ZIP file to your SD card
2) Reboot to recovery
3) Make a backup of your current ROM using menu Backup and Restore / Backup
4) Choose from menu: install zip from sd card / choose zip from sd card Find ZIP in filesystem structure
5) Confirm to flash
6) Reboot
Click to expand...
Click to collapse
Leads to flickering of screen. Tested by me. Use is not recommended because it causes too much flickering and instability
Stock+Root Sense 2.1
This recovery will prevent Op2x from incompatibility with future's ROM.
This recovery is builded by my friend, [email protected] ([email protected]) who can't upload this because of his travel to another country. (Because of this, he can't build AOSPA, too.)
What's New from 2.6.0.0 to 2.7.1.0:
- Improved Scrolling
- You can know how much of files are backuped/restored during backup/restore.
What doesn't work:
- You can't flash files from external storage: if you try that, a recovery reboot will happen.
File Download:
http://mega.co.nz/#!28MR3ILZ!_-2seCw_tTyQg9ZDfLRNaSIdZ8LgbZpkC2dvJ0XIHaA
(You should install MEGA app first if you try to download in phone. In PC, I recommend Chrome browser, not IE.)
How to apply:
- Just flash that .zip file in any recovery.
- Only for New Bootloader!!!!
If there any questions or another bugs, tell me.
F2FS improves the benchmark score in most (if not all) devices by around 20%..
For testing:
I have modified an APK containing Aroma Installer to flash recoveries to fotakernel for our ZR's. This is an initial release..
It contains 2 recoveries.
PhilZ Touch and TWRP with f2fs (TWRP) support which has been tested and working in both Resurrection and Validus builds/ports and should work in all cm11 and CM12/CM12.1 with f2fs working in cm12 after march this year
Install the apk and flash either Philz or Twrp through the app in the drawer..
And no, this is not Xperia Recovery manager.
The recoveries are both contained in the app so making it 22MB to download.
The TWRP 2.8.7.0 has new graphics and f2fs support
PhilZ is stock 6.57.9 cwm v6.0.5.1 shared by @uncomment
Download APP here (contains the 2 recoveries mentioned above): Removed because of bugs.. will fix and upload to new link..
TWRP 2.8.7.0 f2fs with updated graphics flashable zip: https://drive.google.com/file/d/0B3slVcYWwXQ-RjNKUDhWWk5OemM/view?usp=sharing
(This is the latest recovery from TeamWin with their new blue theme.. I personally didn't like all that blue so I changed the images.. See screenshot below)
Philz Touch 6.57.9 flashable zip:https://drive.google.com/file/d/0B3slVcYWwXQ-MEd4TU1vb0NYcmc/view?usp=sharing
Flashable ZIP stock TWRP 2.8.7.0 with f2fs:
Put the zip in you sd card and flash through recovery.. This will push the twrp 2.8.7.0 f2fs to your fota kernel, reboot recovery after flash...
Download: https://drive.google.com/file/d/0B3slVcYWwXQ-YTB6V1N0eEx5SU0/view?usp=sharing
Please test (recovery.img)
UPDATED TO TWRP 2.8.7.0
Download here: https://drive.google.com/file/d/0B3slVcYWwXQ-SjJRRjdyZ2pzeXc/view?usp=sharing
Instructions are the same as below...
This is TWRP 2.8.6.0
Download here:
https://drive.google.com/file/d/0B3slVcYWwXQ-Q0pEYzlFSjhPNFk/view?usp=sharing
Place the recovery.img (it is named twrp.img when you download but rename to recovery.img) to you internal storage and use adb or emulator (download Android Terminal Emulator free from Store) commands to install to your Fota:
su (enter and grant root access if using Emulator)
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel (enter)
If you use Xperia Recovery Manager app by @championswimmer, rename the recovery.img to twrp.img and put in the TWRPXperia folder on your sd-card and flash to Fota through the app. Confirmed working.
If the image doesn't install correctly, please flash this hack:
http://forum.xda-developers.com/show...51&postcount=2
Only cache and data/ ext-sdcard is convertible for now, if you try to convert system, you will brick your phone..
Use the following method to convert:
Convert to f2fs by pressing Wipe > Advanced Wipe > select the desired partition > Repair or change filesystem > Change filesystem > f2fs
Some added info by @nostupidthing
with f2fs twrp installed, i've changed /cache and /data into f2fs without wiping. you just have to backup /data, then format it as f2fs, click "use rm-rf instead for format" in twrp settings, then restore /data.
If any one is looking for a theme for twrp recovery, i found an excellent theme here: http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
(Download resolution 720x1280 for ZR)
As an added service I am willing to personalize the splash screen at recovery start-up should you have any request ie your name, flag etc but i will insist that "TeamWin" will be present somewhere on your personalized splash.. After all, we all benefit from their hard work.. Do not expect your request to be done within the hour but periodically check and i will upload and link as and when you request is done..
Massive thanks to @uncomment and @o-l-a-v and @Olivier and @blastagator and @qsnc including @nostupidthing for testing and for making this possible. @SdtBarbarossa for the app!!
the "now changing the microsd to f2fs" is not necessary for /data & /cache. you may or may not like to do it, and i ended up not doing it because copying my several gbs of files out of the microsd takes so much time and i just gave up..
but if anyone wants to do it, basically you just copy the files to your PC, then format the microsd to f2fs, then copy the files back there.
nostupidthing said:
the "now changing the microsd to f2fs" is not necessary for /data & /cache. you may or may not like to do it, and i ended up not doing it because copying my several gbs of files out of the microsd takes so much time and i just gave up..
but if anyone wants to do it, basically you just copy the files to your PC, then format the microsd to f2fs, then copy the files back there.
Click to expand...
Click to collapse
I agree with you.. I have formatted my ext sd card but like you said, took ages to copy the content to pc and back again.. In my opinion not worth doing if anyone, like me, use the ext_sd card for storage of music and downloads etc.. Cache and data absolutely worth doing tho.. A great many thanks for your comments and help doing this..
sent from Paul's phone
one more thing. backing up /data via twrp will not back up your "internal sd" files, like camera photos if you store them internally instead of on the microsd, so you have to copy those yourself as well.
Added flashable zip to op... Should make things easier..
the 2.8.7 flashable zip works, bro. thx.
hey, any chance that you make an insaller version ?
Ilko said:
hey, any chance that you make an insaller version ?
Click to expand...
Click to collapse
I'll look in to it..
hagar006 said:
I'll look in to it..
Click to expand...
Click to collapse
Great
BTW, I would suggest you to set TWRP's file manager to open SDCARD1 by default instead of SDCARD0, if possible, or even both to let users choose. I'm not sure if this is ROM or Recovery dependent because it worked this way through the latest Validus ROM. I'd bet on the recovery side though.
Ilko said:
Great
BTW, I would suggest you to set TWRP's file manager to open SDCARD1 by default instead of SDCARD0, if possible, or even both to let users choose. I'm not sure if this is ROM or Recovery dependent because it worked this way through the latest Validus ROM. I'd bet on the recovery side though.
Click to expand...
Click to collapse
It's party of the recovery but a few spaces down from the top in file manager is external_SD and a few spaces lower is SD_card so should be easy enough to find the way around..
BTW I've made new images and things for twrp which makes it a little easier to see but I'm waiting for permission from someone as I used their ui.xml to make that.. Will be added as soon as
Sent from my ZR
i didn't find any p880' examples, for Anykernel2.
?Does zip' anykernel.sh -included, will work with:
block=/dev/block/platform/sdhci-tegra.3/by-name/LNX;
thanks for help?
btw: Since multirom kexec64 came out, do you believe lg G5 (removable battery & sdcard) is the "unknown heir" of 4X HD?
bloomed in the moonlight
EXPERIMENTAL!
Attached is an ak2 unofficial version of Nameless2' kexeced kernel from @laufersteppenwolf (~cm12' tree):
(prim-origin https://github.com/NamelessRom/android_kernel_lge_p880/tree/n-2.1 )
Included is Pingpong' cve2015-3636 patch and original bootanimation.
It can be flash, on primary rom, over @csk1jw aosp5.1.1 with Fritzcola' twrp 2.8.6.
Once done you can try multiboot with other compatible roms.
PROCEED WITH CAUTION and follow:
1) install aosp5.1.1 and boot it once;
2) without rebooting under multiromV32' recovery :
-full backup aosp5.1.1
-+ install ak2.zip
-+ perform advanced/fix permissions
-+ install multirom-20150521-v32-UNOFFICIAL-p880.zip
3) reboot
If you loose multirom (can happen if you flash a new 2nd rom or other ...), re-fix permissions and re-flash multirom v32.
Since Nameless' ko are flashed to system; if you want backward to aosp5.1.1, you need to restore full backup.
Don't complain, but light a post if you believe it's can be harmfull.
Thanks for any suggestion (and vote to poll).
How can i anykernel a kernel from CM13 stock blobs?
I compiled it and now i want to anykernel it...
InterrtuptoR said:
How can i anykernel a kernel from CM13 stock blobs?
I compiled it and now i want to anykernel it...
Click to expand...
Click to collapse
Anykernel reproduces this holy thread : http://forum.xda-developers.com/showthread.php?t=2319018
Be sure, in your zip, to follow p880' specifics mounts updater-script (/META-INF/com/google/android/) and check mkbootimg.sh (/kernel/) for exact line_action=boot_info. Don't forget the modules (/system/lib/modules/) ...
Anykernel2.zip will give you full (very complicated & very advanced fake update-binary) tricks for "live" repack with a big /anykernel.sh, in case of incompatibility with alfsamsung' cm13 (fastboot boosted kernel<->ROM (?)).
Code:
Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Instructions for installing Treble-firmware Android 9 based on the vendor from 11/12/2019 for EUI markup.
1. Install Recovery specifying the vendor section.
1.1 Download: "TWRP_VENDOR1".
1.2 We go into our Recovery - Installation - Installing img - Select the downloaded file - Install as Recovery.
1.3 Reboot in Recovery.
2. Installing a patch that changes the markup and creates a Vendor section.
2.1 Downloading: "repart_vendor".
2.2 Install the patch through Recovery - Reboot in Recovery.
2.3 Go to Cleaning - Selective cleaning - everything is selected except Device memory and cleaning.
3. Restore Vendor and Boot.
3.1 Download the "boot_vendor".
3.2 In the archive from the folder BACKUPS\9ba6452 we take the Folder 2019-11-12--03-11-24_aosp_c106-userdebug_9_PQ3A190705003_0fd956d and put it in TWRP\BACKUP\Folder with tricky code\
3.3 Recovery - Select backup 2019-11-12--03-11-24_aosp_c106-userdebug_9_PQ3A190705003_0fd956d - restore - Boot and Vendor must be checked.
4. Select the desired firmware (type ARM64 A (or A only)) in any available place Link Link2
4.1 If the downloaded firmware is in the archive, unpack it to img.
4.2 Installing img - select the downloaded file and install it as System image.
4.3 Reboot in Recovery (May write that the system is not installed, do not pay attention).
4.4 Install the patch "fix_gsi_r1".
4.5 Install Gapps if needed.
4.6 Reboot into the system.
4.7 If there is no sound - put a patch "sound+treble+final".
4.8 If there is no network, reboot into recovery and repeat step 4.4 again.
4.9 If you don't like the color saturation in Gcam - put a patch "video_play6".
• This manual is designed for installation using a PC, if you do not have a computer, download all the files in advance.
• Format data is not necessary, all data will be saved.
• Not all gsi are equally useful and bug-free.
• This instruction is not suitable for installing ported GSIs such as Miui, Flyme, ColorOS, etc.
Patch for rollback, for the 6th markup "restore_6"
The new kernel is based on 11 sources, in an attempt to run 10-11 gsi: "image-new"
10-11 gsi hang on a bootlogo, maybe someone can fix it.
You do everything at your own peril and risk. I am not responsible for bricks.
Source code
Discussion
Big Thanks:
Ampir-nn