Related
i got a kindle fire HD from a friend and it was a store display so it was in a display loop, and i tried to root it.
i got a factory cable, plugged it in and got into fast boot.
i tried a boot loader and it said everything was going okay, until all of a sudden the kindle went black.
now it turn on at all. its just a black screen, the cable doesn't do anything, the computer doesn't recognize it or anything.
i even took it apart and removed the battery and still nothing.
is there anyway of getting this thing on now?
alin2em said:
i got a kindle fire HD from a friend and it was a store display so it was in a display loop, and i tried to root it.
i got a factory cable, plugged it in and got into fast boot.
i tried a boot loader and it said everything was going okay, until all of a sudden the kindle went black.
now it turn on at all. its just a black screen, the cable doesn't do anything, the computer doesn't recognize it or anything.
i even took it apart and removed the battery and still nothing.
is there anyway of getting this thing on now?
Click to expand...
Click to collapse
Give Kindle Fire First Aide a try. There's also some awfully clever people who frequent that thread to ask advice of.
alin2em said:
i got a kindle fire HD from a friend and it was a store display so it was in a display loop, and i tried to root it.
i got a factory cable, plugged it in and got into fast boot.
i tried a boot loader and it said everything was going okay, until all of a sudden the kindle went black.
now it turn on at all. its just a black screen, the cable doesn't do anything, the computer doesn't recognize it or anything.
i even took it apart and removed the battery and still nothing.
is there anyway of getting this thing on now?
Click to expand...
Click to collapse
what's the application you used to root your device?
i'll assume you used kindle fire utility 0.9.6?
hard bricked
Yes i used some bootloader that after more reading was only fo the kindle fire and not the hd
alin2em said:
Yes i used some bootloader that after more reading was only fo the kindle fire and not the hd
Click to expand...
Click to collapse
Well, To be honest with you this is the 5th time i've seen this happen and every time the device ends up with a damaged bootloader partition Which means the device is permanently bricked and can only be recovered using professional ( And expensive) recovery tools, All you can do now is contact Amazon and ship it back to them, They should send you a replacement, If amazon is gives you trouble just tell me, I might be able to get you a replacement from Prokennexusa.
AmrBanawan said:
Well, To be honest with you this is the 5th time i've seen this happen and every time the device ends up with a damaged bootloader partition Which means the device is permanently bricked and can only be recovered using professional ( And expensive) recovery tools, All you can do now is contact Amazon and ship it back to them, They should send you a replacement, If amazon is gives you trouble just tell me, I might be able to get you a replacement from Prokennexusa.
Click to expand...
Click to collapse
Amazon gave me trouble. the girl i spoke with literally said, "sir, you're out of luck."
what is Prokennexusa, and would they be able to replace/fix this kindle fire hd 8.9?
TigerG8 said:
Amazon gave me trouble. the girl i spoke with literally said, "sir, you're out of luck."
what is Prokennexusa, and would they be able to replace/fix this kindle fire hd 8.9?
Click to expand...
Click to collapse
Prokennexusa's name is Christian Bryant
Ship your kindle to him at
Xerocomm, Inc. - 1684 Northstar Drive - Petaluma CA 94954
Send it ASAP and he'll replace it for you, He'll get it done by the end of the week!
Chris receives many bricked kindles so don't forget to send him an email at [email protected] so he knows!
Good luck
AmrBanawan said:
Prokennexusa's name is Christian Bryant
Ship your kindle to him at
Xerocomm, Inc. - 1684 Northstar Drive - Petaluma CA 94954
Send it ASAP and he'll replace it for you, He'll get it done by the end of the week!
Chris receives many bricked kindles so don't forget to send him an email at [email protected] so he knows!
Good luck
Click to expand...
Click to collapse
dude, i thank you so much for this! i don't really have too much experience with shipping things out, so... it could be a lil while. i'll go ahead and email Chris. how much will it cost me?
Hard Bricked Kindle fire hd 7
Got my Kindle fire hd 7 hard bricked, it does not responds to charging and did not get detected by the pc, neither the power button works.
Is there any solutions to unbrick the hard bricked kindle fire hd7.
only genius can provide me with the solution
I am really in trouble plz help me, this is my [email protected]
same problem here, I installed the wrong bootloader, I installed the one for KFHD8 instead of KFHD7
now my screen is black and using lsusb doesnt detect anything
Same here, greatly appreciate any help
Found a solution. didn`t try yet
searching i found this page where explain how to fix the hard brick, black screen no sing of life, cant post links so, search in google "new life for a dead Kindle fire hd, is in mascote..... can any expert try it and explain that to the rest of us,
U solder a wire from a pin to ground and plug it into a PC running Linux and compile the program after cloning the git repository. Problem is I think we need a signed partition table that only amazon has from what I have heard, though personally I'm wondering if we can't just use adb pull and pulling the entire mmc block device off the kindle, but I don't know what the path to it is, normally I would use dd to make an image first, but because usually the partition table image is the same size as the drive itself it wouldn't fit on the sdcard, unless u had a flash drive hooked up over otg. Maybe the reason this hasn't been done is because we can't pull the entire emmc while the partitions are active?
Edit: ah just found the reason we can't do it, I was wrong it wasn't the partition table, its because the initial file that is pushed to the device has to be signed and we have no way of doing so, initial file being something like a initial loader to accept whatever image your trying to shove into the kindle.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Unfortunately, I was in a hurry and got lazy. I (unknowingly) flashed a corrupted stack and 7.2.3 bootloader to my KFHD7 without checking the md5 checksum. After the flash and restart, I was greeted with a hard bricked pile of junk that won't turn on or do anything now. I have emailed Chris Bryant at [email protected] and [email protected] this afternoon to see if there is any chance he can help. Any one have any other ideas? I have the red factory fastboot adapter to use but, like I said earlier, my KFHD7 doesn't seem to do anything now.
Wait for kurohyou to map out the emmc contact point for your kindke's motherboard and solder it to a USB sdcard reader to reflash the boot loader from Linux.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
waiting man
stunts513 said:
Wait for kurohyou to map out the emmc contact point for your kindke's motherboard and solder it to a USB sdcard reader to reflash the boot loader from Linux.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I am waiting too to solve the prob, got same prob here...........
Any chance to solve this
I have the same issue after trying to install FFF 1.5 zip and L_SPEED_V1.5_REBORN.zip file via TWRP and everything seemed to be fine but after a reboot the kindle is hardware bricked and no sign of life so far after many attempts to revive it, I got it just two months ago and I was happy after rooting it and trying CM12 on it (everything was great but very laggy after installing few softwares so that's why I tried to install this L_SPEED_V1.5_REBORN and see if it improve UI speed)
I really appreciate any suggestion or help from experts here (I learned a lot reading your guides and I am really grateful for everything you are doing here)
neoroid said:
I have the same issue after trying to install FFF 1.5 zip and L_SPEED_V1.5_REBORN.zip file via TWRP and everything seemed to be fine but after a reboot the kindle is hardware bricked and no sign of life so far after many attempts to revive it, I got it just two months ago and I was happy after rooting it and trying CM12 on it (everything was great but very laggy after installing few softwares so that's why I tried to install this L_SPEED_V1.5_REBORN and see if it improve UI speed)
I really appreciate any suggestion or help from experts here (I learned a lot reading your guides and I am really grateful for everything you are doing here)
Click to expand...
Click to collapse
How did you fix the hard brick. Can please guide.
NO I didn't have a chance to fix it nor get it replaced by Amazon, it's collecting dust now and I am regretting the money I've spent on this... since Amazon don't offer reparation nor tools to it... if your issue is not hardbrick, which mean that you tablet can power up and display something on the screen then you have a chance to get it fixed, just look for the thread here and you will find a way to fix it.
If it is the Kindle Fire HD 8.9 that you bricked there is a breakdown of how to fix it here: [Discussion] Direct access to e-MMC to fix bricked KF (HD 8.9 version)
It is not easy and only recommended as a last resort. The last person that tried was also having an issue with the boot.img file being too big so I added it near the end of the thread as an attachment. Good luck!
Hi I have a great problem,
I have brick my kindle fire hd.
I have tried to get the Google Play Store on it.
Now i have a black screen. but sometimes it gets on and shows the kindle fire hd loge then he switch to the kindle fire Fastboot logo and then shut down to the black screen.
When i tried to connect with my PC it shows in the device manager the omap4440 driver. but the problem is when i connect the kindle it connect and disconnect every second.
I hope someone can help me!!!!
clubdancer07 said:
Hi I have a great problem,
I have brick my kindle fire hd.
I have tried to get the Google Play Store on it.
Now i have a black screen. but sometimes it gets on and shows the kindle fire hd loge then he switch to the kindle fire Fastboot logo and then shut down to the black screen.
When i tried to connect with my PC it shows in the device manager the omap4440 driver. but the problem is when i connect the kindle it connect and disconnect every second.
I hope someone can help me!!!!
Click to expand...
Click to collapse
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1951254
You will need a factory cable.
onemeila said:
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1951254
You will need a factory cable.
Click to expand...
Click to collapse
I have a factory cable. but when i pluged it in the kindle and to the pc it connest and disconnet every second. i think there is something with the usb port from the kindle
clubdancer07 said:
I have a factory cable. but when i pluged it in the kindle and to the pc it connest and disconnet every second. i think there is something with the usb port from the kindle
Click to expand...
Click to collapse
Just to clarify...
You do realize that there is a difference between a "factory cable" and the OEM USB cable that comes with the Kindle Fire or any other standard USB cable, don't you?
soupmagnet said:
Just to clarify...
You do realize that there is a difference between a "factory cable" and the OEM USB cable that comes with the Kindle Fire or any other standard USB cable, don't you?
Click to expand...
Click to collapse
I now what a factory cable is. i have buy a factory cable at ebay. i found the link to them here on xda-developers
It's a very common mistake , so I had to check.
It is extremely unlikely that simply trying to install the Play store would cause the OMAP ROM to intervene with the boot process. It would be extremely helpful if you could explain exactly what you did before this happened.
soupmagnet said:
It's a very common mistake , so I had to check.
It is extremely unlikely that simply trying to install the Play store would cause the OMAP ROM to intervene with the boot process. It would be extremely helpful if you could explain exactly what you did before this happened.
Click to expand...
Click to collapse
I have root my Kindle with the tutorial from chip online. i cant put the link inside here because i must write 10 posts. i hope you now that tutorial
I currently have a bricked kindle 7 hd and wanted to see if anyone could help me out with their expertise. A week ago I accidentally bricked my kindle and purchased the factory cable on ebay to try to fix.
At this point when I connect the cable, screen stays black.
If i press kindle power button, Kindle logo will briefly appear, followed by fastboot logo for split second and then goes black again.
There are so many posts on the website on how to fix a bricked kindle, but I'm unsure which one is the right solution in this case.
Also, my driver on the Device Manager connects and disconnects continuously. And for some reason, I'm showing OMAP4440 when I connect my kindle, which I assume is not correct.
What is my next step, or what do I download?
Please, if someone can help, I'd be very grateful. I've been without my kindle for over a week. Thank you.
That kindle is hard bricked, there's a slight chance of fixing if it is flashing fastboot mode for a few seconds, but I give it a 10% chance of fixing. We can't fix omap4440 bricks because while we have the means to interface with that device, we need a signed xloader for the kindle to let us flash the other partitions. We can't get the signed xloader (believe its called xloader, might be called something else) unless someone at amazon or TI were nice enough to leak it and probably get fired in the process.
On another note is that android adb composite device staying there the entire time the kindle is plugged in? If it does then you may be able to fix the kindle, I haven't heard of omap4440 and the adb composite being there at the same before. I would guess that adb is the fastboot interface but usually it says Tate when drivers aren't installed and in this case it doesn't but still has an exclamation. I'm curious....
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Well, @stunts513, it also shows that a kindle fire is plugged in with adb enabled. So he might not be 100% out of hope.
It sounds like the bootloader does indeed work, but there is a small problem. I am not sure what that problem is, but if the fastboot logo even shows at all, there is a small chance you could get it up and running again. Download the kfhd7 bootloader provided by @Hashcode and see if you can "fastboot flash" it before the screen goes black. Type in the command and the second you see the orange kindle fire logo, hit enter. Keep in mind that it might work. I am not responsible if it ruins your device further. It shouldn't, though.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Well, I wouldn't say 100% out of hope...
http://forum.xda-developers.com/showthread.php?t=2391047
Or you could try using "fastboot boot" to boot the bootloader. This takes barely less time so if the fastboot flash fails, try this.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Same exact problem, did anyone find a fix?
lizvx said:
I currently have a bricked kindle 7 hd and wanted to see if anyone could help me out with their expertise. A week ago I accidentally bricked my kindle and purchased the factory cable on ebay to try to fix.
At this point when I connect the cable, screen stays black.
If i press kindle power button, Kindle logo will briefly appear, followed by fastboot logo for split second and then goes black again.
There are so many posts on the website on how to fix a bricked kindle, but I'm unsure which one is the right solution in this case.
Also, my driver on the Device Manager connects and disconnects continuously. And for some reason, I'm showing OMAP4440 when I connect my kindle, which I assume is not correct.
What is my next step, or what do I download?
Please, if someone can help, I'd be very grateful. I've been without my kindle for over a week. Thank you.
Click to expand...
Click to collapse
I have the same problem Word for Word just a few extra details: I did have TW RP installed and I had just recently installed Kinology which was working but I went Back into TW RP again to try to Flash CM and didnt have all the files I needed But went ahead and removed my OS somehow leaving me stuck in TWRP Trying to figure out away to get the files over to it. At some point it ended up in Fastboot mode and I fell asleep so it was running with just the Fastboot logo for several hours and I woke up and saw that it was turned back off at which point I attempted to reboot back into recovery (TWRP) but discovered it would only show Kindle Fire for <1 second then Fastboot <1.5 seconds and back to a black screen. If it's connected to the computer it will make a sound as if the device was recognized but then a strange sound I have not heard I guess meaning the device was not installed correctly; Then this is repeated not stop until a reset on the device is done just the correct amount of time where it doesn't turn back on but the sound stops on the computer and the KFHD screen stays off. I'm new to Android and rooting, etc. but in the last 45+days since I got this KFHD7 used, I have used XDA countless times for a variety of reasons and I intend to be a contributing member from this day forward, even if only in a very limited capacity. I have grown to respect the incredible work of Hashcode among others on XDA and being a noob to Android customization as well as these forums, I have been reflecting on my years being tied down by iOS devices; can't help but feel like I wasted so much time and money, trying to so the things that Android was already capable of doing. I think I may need to f-around and jailbreak my iPhone 4S pretty soon when I'm able to scoop up a real nice Android phone and leave ios behind for good like I should have done when I switched from the very first iPhone on Cingular Wireless!! But yeah sorry, um... Little long-winded on my first ever reply on XDA. I'll try not to make a habit of that. I was just wondering if anyone made any progress on this issue, and thought my 2¢ could potentially be helpful, disregarding all the ios b.s. My Kindle Fire is Hard Bricked and I'm keeping my fingers crossed that I can squeeze something out of that "10% chance for recovery." Thanks a billi.
Steveohookem said:
I have the same problem Word for Word just a few extra details: I did have TW RP installed and I had just recently installed Kinology which was working but I went Back into TW RP again to try to Flash CM and didnt have all the files I needed But went ahead and removed my OS somehow leaving me stuck in TWRP Trying to figure out away to get the files over to it. At some point it ended up in Fastboot mode and I fell asleep so it was running with just the Fastboot logo for several hours and I woke up and saw that it was turned back off at which point I attempted to reboot back into recovery (TWRP) but discovered it would only show Kindle Fire for <1 second then Fastboot <1.5 seconds and back to a black screen. If it's connected to the computer it will make a sound as if the device was recognized but then a strange sound I have not heard I guess meaning the device was not installed correctly; Then this is repeated not stop until a reset on the device is done just the correct amount of time where it doesn't turn back on but the sound stops on the computer and the KFHD screen stays off. I'm new to Android and rooting, etc. but in the last 45+days since I got this KFHD7 used, I have used XDA countless times for a variety of reasons and I intend to be a contributing member from this day forward, even if only in a very limited capacity. I have grown to respect the incredible work of Hashcode among others on XDA and being a noob to Android customization as well as these forums, I have been reflecting on my years being tied down by iOS devices; can't help but feel like I wasted so much time and money, trying to so the things that Android was already capable of doing. I think I may need to f-around and jailbreak my iPhone 4S pretty soon when I'm able to scoop up a real nice Android phone and leave ios behind for good like I should have done when I switched from the very first iPhone on Cingular Wireless!! But yeah sorry, um... Little long-winded on my first ever reply on XDA. I'll try not to make a habit of that. I was just wondering if anyone made any progress on this issue, and thought my 2¢ could potentially be helpful, disregarding all the ios b.s. My Kindle Fire is Hard Bricked and I'm keeping my fingers crossed that I can squeeze something out of that "10% chance for recovery." Thanks a billi.
Click to expand...
Click to collapse
When you remove your OS off any device without one to install, its like giving someone a car with no steering wheel. You now need to push a ROM thru TWRP using ADB. Try using the solution that helped me, which I provided to another user in this thread:
http://forum.xda-developers.com/showthread.php?p=45188927#post45188927
Sent from my Amazon Kindle Fire HD using xda app-developers app
---------- Post added at 06:10 AM ---------- Previous post was at 05:56 AM ----------
lizvx said:
I currently have a bricked kindle 7 hd and wanted to see if anyone could help me out with their expertise. A week ago I accidentally bricked my kindle and purchased the factory cable on ebay to try to fix.
At this point when I connect the cable, screen stays black.
If i press kindle power button, Kindle logo will briefly appear, followed by fastboot logo for split second and then goes black again.
There are so many posts on the website on how to fix a bricked kindle, but I'm unsure which one is the right solution in this case.
Also, my driver on the Device Manager connects and disconnects continuously. And for some reason, I'm showing OMAP4440 when I connect my kindle, which I assume is not correct.
What is my next step, or what do I download?
Please, if someone can help, I'd be very grateful. I've been without my kindle for over a week. Thank you.
Click to expand...
Click to collapse
Creepy never seen that happen on either of my two KFHD7s. Have you tried uninstalling that driver completely? Or uninstalling those drivers thru "Device Manager" AND all others installed for /example the ones provided by Hashcode, then reinstalling them WITH the device still connected? Many times I've realized that these Kindle Fires love to have drivers juggled around. The fastboot cable I made at home using a Samsung USB does FBmode instantly. Try holding the power button for about 20 seconds while unplugged, make sure when you let go it doesn't power back on. If alls well, have the fastboot cable plugged in already to your computer, then attach it to the KF. See if that helps. If not, then believe it or not it might be a hardware failure if the screen goes black as you mentioned...
Sent from my Amazon Kindle Fire HD using xda app-developers app
r3pwn said:
Well, @stunts513, it also shows that a kindle fire is plugged in with adb enabled. So he might not be 100% out of hope.
It sounds like the bootloader does indeed work, but there is a small problem. I am not sure what that problem is, but if the fastboot logo even shows at all, there is a small chance you could get it up and running again. Download the kfhd7 bootloader provided by @Hashcode and see if you can "fastboot flash" it before the screen goes black. Type in the command and the second you see the orange kindle fire logo, hit enter. Keep in mind that it might work. I am not responsible if it ruins your device further. It shouldn't, though.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
My bad the picture must have not loaded up last time, or I wouldn't have said that much. But more than likely he has a hard brick. Slim chance of fixing it though.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
lizvx said:
I currently have a bricked kindle 7 hd and wanted to see if anyone could help me out with their expertise. A week ago I accidentally bricked my kindle and purchased the factory cable on ebay to try to fix.
At this point when I connect the cable, screen stays black.
If i press kindle power button, Kindle logo will briefly appear, followed by fastboot logo for split second and then goes black again.
There are so many posts on the website on how to fix a bricked kindle, but I'm unsure which one is the right solution in this case.
Also, my driver on the Device Manager connects and disconnects continuously. And for some reason, I'm showing OMAP4440 when I connect my kindle, which I assume is not correct.
What is my next step, or what do I download?
Please, if someone can help, I'd be very grateful. I've been without my kindle for over a week. Thank you.
Click to expand...
Click to collapse
hi guys from Italy, i have the same very problem...now is the end of Settember....any good news about?????????
Not very much, unless you wanna try hooking up your emmc to a USB card reader like kurohyou did and trying to flash the stock partitions from Linux, no there really isn't any new news. That's basically the only way we have to recover from a hard brick, and it still isntna perfected process, he got his kf2 to a soft brick state after un-hardbricking it, but he couldn't un-softbrick it yet, so he is currently working on that part last I heard.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Hello, I have the exact same problem with my KFHD7 and I was reading this thread with the hope that someone would have find a solution.
Is there a solution out there for this problem yet?
Juls69 said:
Hello, I have the exact same problem with my KFHD7 and I was reading this thread with the hope that someone would have find a solution.
Is there a solution out there for this problem yet?
Click to expand...
Click to collapse
i think someone finished mapping the rest of the points out on the motherboard but i'm not positive, I'll have to find the thread but the only fix is to solder the kindles motherboard contact point for the emmc to a sdcard reader and hook it up to a pc running linux and flash the bootloader partition with the dd command. Keep in mind I'm referring to the hd 7 2012 model, i don't believe anyone has mapped the points for the 2013 model yet.
edit: foudn the thread: http://forum.xda-developers.com/showthread.php?t=2674737&page=3
use the tutorial for the kf2 or kfhd8.9" but use the contact points mentioned there, might take some researching to know what each of those corresponds to on the sdcard reader. Not everybody is up to soldering on their kindle to fix a hard brick.
Hello,
i found these Thread, because i have the same problems.During the boot the kindle shows the kindle logo then the fastboot logo and the screen goes black. But if use a fastboot-code at the right time, the kindle stay in the fastboot-mode. So i tried to flash the Bootloader and so from Hashwell. The output of fastboot says everythings ok, no errors, but my kindle doesn't leave the bootloop. What i done wrong? I read about the Kindle Fire First Aide-Kit, but i cant find an downloadlink, that still work.
Maybe someone of you can help with this problem.
So i didnt check rename the u-boot.bin image properly. I flashed it to a Kindle fire 7 HD but it the image was for a regular KF.
Right after that the KFHD no longer boots.
Black screen, fastboot USB connected, but nothing on the screen.
Anything i can do to revive this KFHD.
pid1981 said:
So i didnt check rename the u-boot.bin image properly. I flashed it to a Kindle fire 7 HD but it the image was for a regular KF.
Right after that the KFHD no longer boots.
Black screen, fastboot USB connected, but nothing on the screen.
Anything i can do to revive this KFHD.
Click to expand...
Click to collapse
No, sorry, your Kindle is hard bricked. There is nothing you can do at this point.
Not unless you plan on waiting a while, kurohyou has a method ongoing to fix hard bricks but it involves some difficult soldering, he's working on mapping the contacts for HD 7 and 8.9, but if its still under warranty I'd just send it in for a free replacement. Here's proof of concept that it can be dine, he just posted the pin out for 8.9" tablets, so now we just need pinouts for the 7" model and it should be not too difficult to fix a hard brick assuming you can solder decently. http://forum.xda-developers.com/showthread.php?t=2581124
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Good evening scholars, I am at a end with my Kindle Fire. Below is an
exact account of what I was doing and thus the end state of what is now my Kindle.
I have a rooted kindle. Basic root, nothing significant like CynMod. The boot-loader is stock and all. The only thing I really
installed that is not stock is a different Launcher since Amazon's Launcher is just horrid in my opinion.
I was in Rom Toolbox Pro uninstalling Chameleon Launcher because I wanted to run
Apex Launcher instead. So I uninstalled it. At this point there is no launcher running.
I'm using Rom Toolbox as a console so-to-speak. Simply going from one program to the next without actually ever hitting
the home button. So I go to install Apex Launcher and it says installing. However, it didn't do anything at all.
The status bar never moved; simply stayed at 0%. SO! No biggie, I've seen this before. So to make sure it is not Apex or something
I go to the stock Amazon Launcher. I had a backup and tried to install it through Rom Toolbox. Same thing happens,
No response, idle status bar, etc, etc. So at this point I assume it is Rom Toolbox. So I hit the home key on the slide menu.
Well, I have no launcher currently installed so it did nothing. Go figure. So I decide to do a hard reset. So I hold down the power button.The Kindle shuts off and then my troubles started. I hit the power button and it doesn't pass the Kindle is upgrading notice.
So I do another Hard reset adding insult to injury...but, the same thing again. Turn it off again, plug it in to my computer and attempt a fastboot with the stock cable, same results occurred.
So now my kindle shows the standard Kindle Fire Logo at the beginning of the boot cycle and then stops at the Kinde is upgrading...Starting Applications... prompt. Like the link to the photo below.
h ttp://i61.tinypic.com/2s0eeer.jp g
I try rectifying this, reading several articles.
I tried utilizing the Kindle Fire First Aid, the KFHD SRT, even looking into the android SDK a little. But they either - A. Don't recognize the device or, B. Prompts for superuser. Seeing as how my Kindle barely boots how can I check for a superuser prompt?
I go went into my device manager and looked to see if windows registers the Kindle and it does. The device manager displays Hardware ID's indicating something is there.
USB\VID_1949&PID_0007&MI_00
USB\VID_1949&PID_0007&REV_0216&MI_00
I have my hunches on what the problems could be. But I've been working this for a couple days now and have become agitated.
I have never had to many problems with this type of stuff. I won't say I'm a noob at this kind of work however, I feel like it at this point.
Worst comes to worst I would crack her open. But that is risky business. I rarely touch the inside of my devices.
Any words of wisdom are most appreciated.
If you happen to have adb access I'm guessing there's a system app that needs to be chmodd'ed to the right permissions, or if you want you could run "adb reboot bootloader" (and do what I mention next after it's in fastboot mode), however if you have no adb access then you will need to get a fastboot cable and restore with kfhd SRT or kindle fire first aid.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
As I said before the Kindle does not respond when I use KFHD SRT or the Aid Kit.
That's because for those tools to work you need to already be in fastboot mode with the fastboot drivers installed. Have you managed to get into fastboot mode?
Sent from my Amazon Kindle Fire HD using Tapatalk
As of now what you see is what you get. All I get is a never ending boot screen. I see you made a comment about fast-boot drivers. I might be missing something in the equation. I'm going to retrace my steps and start from scratch. Hopefully I will be able to get this thing working.
Well, I cannot get my Kindle to boot into fastboot. Tried reinstalling ADB drivers and everything. Even tried using the First Aid with no luck. I think the boot loader might be damaged. I keep the kindle off, plug it in, try to initiate a fastboot through the KFFA, it dims and continues normal boot operations. Stopping with the Kindle is upgrading notification.
Those commands aren't going to work unless adb was ever active in the first place, you are going to need a fastboot cable to fix it, the bootloader is behaving just as it should BTW, so it is fine, once you get a fastboot cable it will tell the device to enter fastboot when it powers on, from there kffa should work just fine outside of probably having to install Tue drivers because of how finicky it is. The ones in my signature will surface when the time comes.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app