Hi, I'm wondering if there is any code I can run to disable the LED at the bottom feather touch keys. My touch had some issues and I had it replaced from a third party service center, which messed up the alignment of the LED and when they turn up, the light goes up to 1/4th of the bottom right screen. Since they are refusing to fix it any further(the last screen they put on wasn't working correctly so had it changed again), I have no option but to either deal with the LED light going up covering 1/4th of the screen or to turn it off. If anyone knows any command for disabling it, that'd be great. I know there are codes to turn off the LED light at the top near sensor, so there must be one for the LED at the bottom underneath feather touch keys.
Related
OK, my tilt is under a month old and have two concerns regarding the screen. When using the slider, at the very top of the fully opened "motion" the screen ripples in the center as if it is being compressed with a finger. It is about half and inch in diameter and repeats if I slide the screen at the top of its fully opened position. Is this normal? It is visible under my solid blue background.
Secondly, under certain lights there is a rainbow effect when the screen is off. This is only noticeable if I have it under the light at specific angles. If I push my finger on the screen it moves as if the two layers of the touch screen are in constant contact with each other and in turn when I push on it, I can manipulate this location. This is visible under the center most part of the screen. I am using the original screen protector provided by ATT.
Just wondering if this is normal, if not, I'm tempted to return it and get a new one under the 30-day policy.
Thanks in advance!
Anyone please?
Ive never noticed anything like that. It sounds to me that there is some space between a few layers of plastic and that is causing diffraction of light which you see as the rainbow affect. If you have the option of replacing it with a new one I would. I mean if I buy something I want it to be in mint condition when I pay for it, not damaged.
Hey, Last night I was texting with my phone. I closed the keyboard, and the screen didn't flip to portrait mode. I opened it and closed it again and it remained frozen. Then it dimmed, and the screen was consumed by red green blue and white lines. I did a soft reset and the phone turned on, but only a dim light emanated from the screen, no picture whatsoever. The phone did boot completely, I heard a text message come in, pressing buttons made the appropriate tone. I used no custom roms, nor did I get it wet.
Does this sound like a manufacturer defect? Is there a history of this happening?
MrGneissGuy said:
Hey, Last night I was texting with my phone. I closed the keyboard, and the screen didn't flip to portrait mode. I opened it and closed it again and it remained frozen. Then it dimmed, and the screen was consumed by red green blue and white lines. I did a soft reset and the phone turned on, but only a dim light emanated from the screen, no picture whatsoever. The phone did boot completely, I heard a text message come in, pressing buttons made the appropriate tone. I used no custom roms, nor did I get it wet.
Does this sound like a manufacturer defect? Is there a history of this happening?
Click to expand...
Click to collapse
It sounds like what happens when there is a connection problem between the lcd and the motherboard. If your mobile has warranty, then bring it in. The connections are a press fit type thing, and in my opinion very poor engineering. If you have nothing to lose, then find the dissassembly videos and make sure the connections are being made. Do a search for the "Microp Error". At least I think that is what it is called.
There are some hints there, I believe.
for starters it sounds like you have a pro, not a diamond.
the pro has a problem with chafing of the ribbon cable as it passes through the slider mech.
the cable conductors become exposed and short across the screen mount plate causing the display to lose colors or go blank.
Today I've noticed that there is a light bleed on edge of my screen when I look at it with angle. I do not know if it was there before or it is new,but I've noticed when I was trying to root my 2.3.4 update!
any idea? should I take my phone to guarantee service?
Thanks!
Check your phone with the (uhh..) key combination
It's 3845#*970# in my country,don't know if yours the same
do some search
But if it's clearly a screen bleed, take it to the center
Sent from my LG-P970 using xda premium
I noticed too that the bottom end of the screen, shows some "bleeding" when in total black.
I carefully watched though, that, it's not color bleeding or LCD issue, it's the capacitive buttons back-light which glares from the inside of the screen film.
I turned off the back-light of the capacitive buttons and my screen was plain black.
Give it a try for yourself mate, if it's not plain smooth black, then it's indeed an LCD issue and you have to take it on a service center.
Thank you for replies!
as you see in below images the light is only visible in close angles.
Does anybody have the same problem?
I've tried 3845#*970# and no problem found.
Thanks!
the left one ? the strip of light ?
i think it's just the led
I Cracked my screen to the point the bottom half no longer worked. I got a replacement and installed it. My LED light comes on and I can feel the vibration when 'unlocking' but my screen is black/blank. Does this mean I have a faulty LCD screen or do I need to do some type of hard reset?
Story: I have 2 horizontal stripes on my touchscreen, that do not react on touch. The Touchscreen service menu lets me "clean" the touchscreen to show exactly these 2 bars that cannot be touched/touch doesn't react. Hence I decided to change the display (LCD+digitizer, as separating them is to difficult for me)
Now: Phone disassembled to the point, where I can unplug the display on the back, remove it and plug the new one in. Working so far.
Then I try to glue the new display in (display glue tape applied) which means I have to bend the cable a bit to go under the display. Before I push it firmly on the glue I test it again: LCD not working anymore. I see vertical artefacts.
Basically: The boot screen shows the white "SONY" centred on black background. But there are also artefacts from the "SONY" to the top and bottom. Like lines of error pixels with random colors. Not completely solid but visibly exactly where the "SONY" is.
Those lines are not static. They appear where bright objects are and are always top to bottom. Start is similar to this (during run it is not as bad as in the video, for me it is mostly e.g. when the symbols from the launchbar (WIFI, GPS,...) or the battery is shown) https://www.youtube.com/watch?v=O2kBUXdGJtk
This happened to me twice now and I can't figure out, what I could have done wrong. Does anyone knows what happened here and how to avoid it?