Hi all.
Last week, after i soft bricked my phone (HTC ONE M7 EU with no carrier , bough directly from ) trying to update it to the latest version (i had mine unlocked and rooted to solve previous battery problems), i finally fixed it with the help of an user of this community
I have now an S-off HTC One GPE with 4.4.4 (via OTA update after flashing a RUU zip)
I kinda not like GPE and i think i should back to Sense .
Can anyone point me to the correct RUU thread and/or instructions or presequisites i shoult take account to do this process?
Thanks in advance
diesalher said:
Hi all.
Last week, after i soft bricked my phone (HTC ONE M7 EU with no carrier , bough directly from ) trying to update it to the latest version (i had mine unlocked and rooted to solve previous battery problems), i finally fixed it with the help of an user of this community
I have now an S-off HTC One GPE with 4.4.4 (via OTA update after flashing a RUU zip)
I kinda not like GPE and i think i should back to Sense .
Can anyone point me to the correct RUU thread and/or instructions or presequisites i shoult take account to do this process?
Thanks in advance
Click to expand...
Click to collapse
here are some links, if you're going to use a signed/encryped ruu, then you'll need to downgrade hboot first https://www.androidfilehost.com/?fid=23329332407580580
http://androidruu.com/getdownload.p...31.27_10.31.1131.05_release_310878_signed.exe
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
http://androidruu.com/getdownload.p...50.13_10.33.1150.01_release_316789_signed.zip
http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
https://www.androidfilehost.com/?fid=23329332407584993
Thanks. Whats the difference between signed and unsigned?
diesalher said:
Thanks. Whats the difference between signed and unsigned?
Click to expand...
Click to collapse
considering you are s-off,
very little, but even with s-off, you will first need to downgrade hboot to same or lower version than the signed ruu.exe/ruu.zip
on the other hand, a decrypted ruu.zip doesn't have that restriction
a small chart is here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
under Not So FAQ #2
nkk71 said:
considering you are s-off,
very little, but even with s-off, you will first need to downgrade hboot to same or lower version than the signed ruu.exe/ruu.zip
on the other hand, a decrypted ruu.zip doesn't have that restriction
a small chart is here: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
under Not So FAQ #2
Click to expand...
Click to collapse
So my process will be...
1. Downgrade hboot to 1.44
2. Change back my cid to HTC__002 (when i flashed the RUU from the GPE i changed it to GOOGL001)
3. Flash the RUU zip
Is that right?
diesalher said:
So my process will be...
1. Downgrade hboot to 1.44
2. Change back my cid to HTC__002 (when i flashed the RUU from the GPE i changed it to GOOGL001)
3. Flash the RUU zip
Is that right?
Click to expand...
Click to collapse
you don't have to go back to hboot 1.44
If your RUU is 4.xx flash a 3.xx firmware first
or 3.xx RUU a 3.xx or 2.xx firmware will work.
you may also need the MID change tool if you changed it also
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
clsA said:
you don't have to go back to hboot 1.44
If your RUU is 4.xx flash a 3.xx firmware first
or 3.xx RUU a 3.xx or 2.xx firmware will work.
you may also need the MID change tool if you changed it also
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
Click to expand...
Click to collapse
Ok, i'm confused,
The RUU i'g gonna flass is this
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I'm not sure what is the version . I have installed a 4.4.4 GPE (via OTA Updates)
What should i do. downgrade the bootloader or not. Flash a firmware or not.
sorry , but i'm a bit newbie and dont want to mess up.
diesalher said:
Ok, i'm confused,
The RUU i'g gonna flass is this
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_htc_europe_1-28-401-7_radio_4a-13-3231-27_10-31-1131-05_release_310878_signed-zip/
I'm not sure what is the version . I have installed a 4.4.4 GPE (via OTA Updates)
What should i do. downgrade the bootloader or not. Flash a firmware or not.
sorry , but i'm a bit newbie and dont want to mess up.
Click to expand...
Click to collapse
The 1.28.401.7 is Jelly Bean it's equal to a 3.xx.xxx.x RUU
So the Firmware you would want is this http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/2.24.401.8.zip
Related
Alright, so my friend has an AT&T One and it had 1.26.502.10 firmware (like mine), but he had some camera issues... He decided to do all the modding (root, s-off, etc...) and upgraded to 4.2.2 firmware 2.24. His camera issues continue, and he plans on returning to 4.1.2 with the available RUU that returns the phone to 1.26.502.12. He is s-off, supercid, unlocked bootloader, rooted, running twrp 2.6.0.1 and is on stock rooted 2.24.401.1 Rom. I thought of just using that RUU to return him to fully stock, but since it has all the mods I'm not really sure if I should take another approach or other steps. Please help me out here, I don't wanna brick his phone (even though he's taking it to be replaced). Thanks in advanced!
just download this and run it
https://support.htc.com/en-us/010-H..._Maintenance_Release_Instructions_|_5.30.2013
he couldnt run this with out the mods
Just run the RUU, as he's S-OFF there should be no issues
jerrycoffman45 said:
just download this and run it
https://support.htc.com/en-us/010-H..._Maintenance_Release_Instructions_|_5.30.2013
he couldnt run this with out the mods
Click to expand...
Click to collapse
Yes, that's the very file I have. Thanks! Will run it now! Thanks for the quick reply!
EddyOS said:
Just run the RUU, as he's S-OFF there should be no issues
Click to expand...
Click to collapse
Will do, thanks for ur quick reply!
There's the odd thread here and there saying if you're on the 1.54 HBOOT you need to downgrade to 1.44 before the RUU will work but try it first and see how you get on
EddyOS said:
There's the odd thread here and there saying if you're on the 1.54 HBOOT you need to downgrade to 1.44 before the RUU will work but try it first and see how you get on
Click to expand...
Click to collapse
Hmm, will I get a kind of error during the RUU process that might possibly brick the device or will it warn me before the RUU process starts? Can I and should I just flash the 1.44 RUU from fastboot before starting the RUU? The phone's on 2.24 right now with the modded 1.54 hboot (I know he first has to flash the original, but can/should he flash the 1.44 instead?).
EDIT: As far as I've read till now, the ones having errors were converted to Google Edition with GE hboot and all... I did read about 2 people (one with 2.17 and the other with 2.24 like my friend's phone) both on 1.54 hboot and it worked for both of em. I'm just gonna go ahead and flash the RUU on my friend's phone and hope for the best
Hi,
I want to send my HTC One in for repair, so first I need to restore it to stock.
However, I recently updated my firmware (and hboot) to the new 4.4.3 base (http://forum.xda-developers.com/showthread.php?t=2793539) so right now I am (s-off) on hboot 1.57.0000... Is this a problem when sending it in since this firmware isn't officially released yet (or is it)? And if it is, is it possible to downgrade my hboot?
Also, must I flash the firmware WITH the red warning before going S-on and locking the bootloader again?
I have flashed the stock odexed ROM, boot.img and recovery from the ARHD site (http://android-revolution-hd.blogspot.nl/p/android-revolution-hd-mirror-site-var.html).
Thanks in advance for any help!
No that firmware isn't officially released yet, it's still in testing stages so you will have to downgrade your firmware to 5.??.401.? Lucky for you this firmware comes with hboot 1.57 however if you have flashed a modded hboot/firmware ie to remove red text, then you will need to flash an official one, just find the official firmware package and use that, it comes with the hboot inside it, if you s-on with modded firmware or hboot you will have an instant brick.
The arhd site your got the Rom from should have the firmware package too.
Seanie280672 said:
No that firmware isn't officially released yet, it's still in testing stages so you will have to downgrade your firmware to 5.??.401.? Lucky for you this firmware comes with hboot 1.57 however if you have flashed a modded hboot/firmware ie to remove red text, then you will need to flash an official one, just find the official firmware package and use that, it comes with the hboot inside it, if you s-on with modded firmware or hboot you will have an instant brick.
The arhd site your got the Rom from should have the firmware package too.
Click to expand...
Click to collapse
Great, thanks! I will flash the original firmware in a sec, but the most recent RUU I can find is this one: http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
And I am not sure if that is also based on hboot 1.57 and because of that, if I am able to flash this RUU. Currently I am downloading it but the download speed is terrible, I will report back after I tried.
Or are you saying that I can flash the stock firmware 5.xx.401.xx on top of the current 6.xx firmware? I thought that wouldn't be possible because I'm currently on a higher firmware version but I'll give it a shot!
If you are s-off, you can flash or downgrade anything, however I would personally flash the matching firmware to the ruu that you are downloading, however, the firmware and hboot will be included in the ruu and be downgraded when you run the ruu, so just run it, once it's finished and you boot the phone, you can ota up to the latest version.
Seanie280672 said:
If you are s-off, you can flash or downgrade anything, however I would personally flash the matching firmware to the ruu that you are downloading, however, the firmware and hboot will be included in the ruu and be downgraded when you run the ruu, so just run it, once it's finished and you boot the phone, you can ota up to the latest version.
Click to expand...
Click to collapse
Ah I see, thanks a lot! Still waiting for the RUU to finish, I'll download the corresponding firmware and flash it before I start the RUU. Thanks again!
WiiiLDFARMER said:
Ah I see, thanks a lot! Still waiting for the RUU to finish, I'll download the corresponding firmware and flash it before I start the RUU. Thanks again!
Click to expand...
Click to collapse
You may have to remove the TAMPERED flag before running the ruu and also lock your bootloader, not relocked as the ruu will replace which ever recovery you ha e on your phone for the stock one, sometimes the ruu requires a locked bootloader whether s-off or s-on.
Once it's finished, boot the phone once and then back into bootloader and check the hboot version, if it is lower than the version you have on there now then you'll know you have stock hboot and should be safe to s-on, however like I said before, make sure your locked and tampered has gone before setting s-on (not sure if s-on is required for warranty)
Seanie280672 said:
You may have to remove the TAMPERED flag before running the ruu and also lock your bootloader, not relocked as the ruu will replace which ever recovery you ha e on your phone for the stock one, sometimes the ruu requires a locked bootloader whether s-off or s-on.
Click to expand...
Click to collapse
At the moment I don't have a tampered flag, it only says 'unlocked'. I'll try to lock the bootloader before starting the RUU. Do you know if the Tampered flag will return if I S-ON my M7 after completing the RUU?
WiiiLDFARMER said:
At the moment I don't have a tampered flag, it only says 'unlocked'. I'll try to lock the bootloader before starting the RUU. Do you know if the Tampered flag will return if I S-ON my M7 after completing the RUU?
Click to expand...
Click to collapse
Unfortunately I don't know that, there's been some reports it comes back after you s-on not after the ruu, I think it's HTC 's way of catching you out, others say it's been fine, are you sending it to HTC or your operator ?
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
However , if you've had s-off with that phone before, chances are you'll get it again, you'll just have to do whatever you did before to get it, then go back to stock again, and send it s-off.
WiiiLDFARMER said:
Hi,
I want to send my HTC One in for repair, so first I need to restore it to stock.
However, I recently updated my firmware (and hboot) to the new 4.4.3 base (http://forum.xda-developers.com/showthread.php?t=2793539) so right now I am (s-off) on hboot 1.57.0000... Is this a problem when sending it in since this firmware isn't officially released yet (or is it)? And if it is, is it possible to downgrade my hboot?
Also, must I flash the firmware WITH the red warning before going S-on and locking the bootloader again?
I have flashed the stock odexed ROM, boot.img and recovery from the ARHD site (http://android-revolution-hd.blogspot.nl/p/android-revolution-hd-mirror-site-var.html).
Thanks in advance for any help!
Click to expand...
Click to collapse
Try this guide:
http://forum.xda-developers.com/showthread.php?t=2541082
It worked for me, returned full stock!
Hi!
I've already read like a million tutorials on how to do that, but I think they won't work on my phone. I have the international unlocked version that I later converted to Google Play Edition. So now I have a GPE bootloader, TWRP recovery and root. Below I include a picture of my bootloader. My hboot is 1.54 so I can't use revone to relock the bootloader and make it s-on again, right? I really need you help guys, what should I do?
Edit: I downloaded this RUU "RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1 " - will it work on my phone? I'm not doing anything yet, because I don't want to brick it.
Edit 2: I downgraded my hboot to 1.44 and my phone still hasn't blown up so I guess that's a good sign.
seklerek said:
Hi!
I've already read like a million tutorials on how to do that, but I think they won't work on my phone. I have the international unlocked version that I later converted to Google Play Edition. So now I have a GPE bootloader, TWRP recovery and root. Below I include a picture of my bootloader. My hboot is 1.54 so I can't use revone to relock the bootloader and make it s-on again, right? I really need you help guys, what should I do?
Edit: I downloaded this RUU "RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1 " - will it work on my phone? I'm not doing anything yet, because I don't want to brick it.
Edit 2: I downgraded my hboot to 1.44 and my phone still hasn't blown up so I guess that's a good sign.
Click to expand...
Click to collapse
if your phone was on a x.xx.401.x version originally, then use the 1.28.401.7 ruu, then remove *tampered* and *relocked* banner using guru bootloader reset tool by booting a custom recovery using "fastboot boot recovery.img". You can then turn back s-on and send your phone. Everything is described in nkk71's guide linked in my signature.
Don't forget to set back your original CID and MID if you have changed them to convert your phone to GPE before running the ruu
Can't I use the RUU I downloaded? It's 4.19.401.9. I'm not sure what the original number was, but according to the download page it's compatible with my MID and CID.
seklerek said:
Can't I use the RUU I downloaded? It's 4.19.401.9. I'm not sure what the original number was, but according to the download page it's compatible with my MID and CID.
Click to expand...
Click to collapse
not for warranty purpose cause you must be on hboot 1.44 or 1.54 to remove the "tampered" and "relocked" flags form bootloader.
4.x.401.x ruu is hboot 1.55
1.x.401.x ruu is hboot 1.44
@alray I didn't know RUUs could also update hboot. Thank you for the information. So the 1.x.401.x files are Jelly Bean RUUs, but I'll be able to update to kitkat over the air when I'm done restoring to stock?
seklerek said:
@alray I didn't know RUUs could also update hboot. Thank you for the information. So the 1.x.401.x files are Jelly Bean RUUs, but I'll be able to update to kitkat over the air when I'm done restoring to stock?
Click to expand...
Click to collapse
Ruu update everything, firmware and software.
Yes you'll be able to take ota update after but don't update before you have removed tampered and relocked from the bootloader. Follow instructions in the guide.
@alray Alright, thank you very much. Will I be able to return to a full GPE after I receive it back from the service?
seklerek said:
@alray Alright, thank you very much. Will I be able to return to a full GPE after I receive it back from the service?
Click to expand...
Click to collapse
If you are able to achieve s-off again yes.
They will probably update your phone so it might be more difficult to achieve when it comes back.
@alray I'm having a problem with the guide you linked. It says to enter CWM recovery and use adb commands to remove flags and lock the bootloader, but I can't use any adb commands inside CWM. How do I fix this?
Edit: OK, I fixed this by using TWRP instead of CWM. Can I leave S-OFF and update the device normally, then restore it to GPE after I receive it back from service?
seklerek said:
@alray I'm having a problem with the guide you linked. It says to enter CWM recovery and use adb commands to remove flags and lock the bootloader, but I can't use any adb commands inside CWM. How do I fix this?
Edit: OK, I fixed this by using TWRP instead of CWM. Can I leave S-OFF and update the device normally, then restore it to GPE after I receive it back from service?
Click to expand...
Click to collapse
do not update the phone now, just turn back s-on and send it for repair. Its easier to get back s-off on lower version so better not to take any ota, however they will maybe update your phone at the service center (hopefully not).
Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:
Craig_CFC said:
Hello,
I have looked on xda for an answer before i started this thread but couln't really find the answer or solution i'm personally looking for.. The problem is a friend of mine is S-On with an ex-contract HTC One (M7) CID is something like VODA..... and his HBoot is 1.57.0000 - I'm trying to S-Off his phone so he can get rid of the Vodafone and Flash Firmware and European RUU (This is i can do) but i need to S-Off it 1st ... I installed TWRP so as to root his phone and unlocked the bootloader (HTCDev unlock token) BUT now the problem is, he's just had the Lollipop 5.02 OTA update and of course, cannot instal it with TWRP present :/ i was told just to flash Stock recovery over it? is this correct? and if so, how would i go about it please and how would i get S-Off on his mobile please? I'm lead to believe that Sunshine S-Off is the only option with that HBoot version.. ?
Many thanks in advance to xda and its members :good:
Click to expand...
Click to collapse
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2
alray said:
better to achieve s-off now before taking the ota update or you will need to wait for the new release of sunshine (3.0).
Yes sunshine is the only way to achieve s-off on hboot 1.57.
Achieve s-off
change cid to HTC__001
change mid (if required) to PN0710000
flash the latest ruu 7.19.401.2
Click to expand...
Click to collapse
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542
I meant to add - i can flash the Firmware with S-On can't i? as it's custom.. do i need to be rooted for that? and once firmware has been flashed i will need to Sunshine S-Off or Sunshine 1st then the rest? can i instal that RUU on S-On? If so i will just go ahead (without updating to 5.02) ..would this be ok? I think i need S-Off to chaange CID though dont i? so Sunshie 1st it would be?
Craig_CFC said:
Thank you - Yes, the CID i was going to change to HTC___001 and the RUU i have is: RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1
Firmware:
fw_4.19.401.9_custom.zip
So would i just look for a European RUU with that No. (7.19.401.2)?
and is that Firmware ok please?
I really aappreciate the help here.
And Sunshine S-Off it is
is this any good please? https://www.androidfilehost.com/?fid=95916177934533542
Click to expand...
Click to collapse
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.
alray said:
Check in the general section, thread "htc one European ruu" 7.19.401.2 ruu in the OP. Flash using htc's version of fastboot available at page 4 of same thread. Sorry can post link atm.
Click to expand...
Click to collapse
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:
Craig_CFC said:
Thank you, i have Fastboot and ADB already set up on my laptop - i will look for that now, thanks again alray :good:
Click to expand...
Click to collapse
No you don't understand, you must use the fastboot version posted at page 4 or it will not work. Read the post you'll understand. The regular fastboot from the Android sdk won't work for this RUU.
I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update
ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe
Craig_CFC said:
I see now ..i got the HTC_Fastboot.exe ...is this correct? also, i'm downloading the European.RUU now .. will this come with the Firmware.zip or will i need to search and flash that 1st please? i'm sorry if i'm confusing the issue but i'm really quite new at this and don't totally understand.. also, would the CID still be HTC___001 and can i change that with s-on? 'fastboot oem writecid'
I need to change CID 1st dont i? then Firmware then RUU? then finally S-Off with sunshine before the 5.02 update
Click to expand...
Click to collapse
The European RUU is HTC___001. If your phone is s on you cannot change your CID. You need s off to do that
Craig_CFC said:
ok i've got fw_7.19.401.2-NoRed_NoWipe Firmware and will read up on how to use the htc_fastboot.exe
Click to expand...
Click to collapse
do not flash that firmware whilst s-on, its modified firmware and will brick your phone, you need s-off to change your CID or falsh any different firmware than vodafone firmware.
I discovered that last night i kinda knew anyway that i could not change the CID without S-Off but with everything going on i forgot.. iv'e decided to stick Android Revolution HD 91.1 on his HTC One.. at least he'l have 5.02 and a quick & reliable OS ... iv'e head that 5.02 is the last OTA update for the M7 so it wouldn't matter if he can't update ..cheers for your help anyway
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
no need to change cid, you can flash any custom rom on any CID.
whats your current firmware version, it will be something like 6.09.161.??
---------- Post added at 12:19 PM ---------- Previous post was at 11:38 AM ----------
Craig_CFC said:
Sorry, i only read half your reply - will i need to change CID for Android Revolution HD? will this be safe to flash onto his device please?
Click to expand...
Click to collapse
here you go mate, full RUU Lollipop update for vodafone: https://www.androidfilehost.com/?fid=95916177934540895
Download and flash using htc_fastboot.exe https://www.androidfilehost.com/?fid=95916177934539737, locked / relocked bootloader is required.
Thank You - i am downloading that now
whats your current firmware version, it will be something like 6.09.161.??
Click to expand...
Click to collapse
I'm unsure on that right now as i dont have the phone with me but i'm going there soon and i will post the firmware version here before i go ahead and do anything - thanks again
Thank you everyone for all your help ..in the end i just flashed Android Revolution HD 91.1 ..he's happy with that and he's got his Lollipop 5.02 now i'll keep the Voda RUU for future reference - thanks again!
Craig
Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 1.29.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?
uhm, what? this is nonsense , the lastest available RUU is "4.19.401.9" which must be flashed under hboot 1.56 ... there is no need to go to initial release of android 4.1!
WARNING!!! YOU MUST FLASH HBOOT 1.56 BEFORE APPLYING 4.19.401.9 RUU
RUU: http://d-h.st/KmT
+There is no need to LOCK your bootloader to get an OTA update... Mine is always unlocked and never had a problem with OTA's
+RUU's work only under S-OFF
Androidian10 said:
Hi all, I was just wondering if I should run the RUU ZIP or EXE if I am on S-OFF.
I currently have the 6.06.401.1 firmware along with the stock 6.06.401.1 rom. I need to return to the stock 1.29.707.1 for my HTC__044 before taking the latest OTA to Android Lollipop.
So far, I have used my S-OFF to change my bootloader to *LOCKED* and flashed stock recovery and stock rom for the 6.06.401.1.
I currently have both the 4.20.707.1 RUU EXE and ZIP. Which one should I use? I read that I need to have the 1.44 Hboot but I currently have the 1.54 Hboot.
Halp?
Click to expand...
Click to collapse
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.
Seanie280672 said:
you can use the RUU you have fine 4.20.707.1, you'll just have to make sure your cid and mid match first, and also just flash the 4.20.707.1 firmware first, this will put you on the correct HBOOT and system files for the RUU, no need to lock your bootloader with s-off.
or you can skip all of that and just flash the 7.19.401.2 RUU right now as your phone is as your already on the 6.xx.401.x firmware.
you don't really have any reason to back flash.
Click to expand...
Click to collapse
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.
Androidian10 said:
But I can't seem to find a 4.20.707.1 RUU. I only have the 1.29.707.3 firmware. I need a region specific one because I need to trade my phone in.
Edit: Crap I made a typo in my OP, I mean that I have the 1.29 RUU EXE and ZIP right now.
Could you point me in the direction of a 4.20.707.1 RUU zip?
Also, is it safe to OTA update if I flash back to 1.29 with S-OFF?
Click to expand...
Click to collapse
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.
Seanie280672 said:
I thought you said you had the 4.20.707.1 RUU
if not then you'll have to use the 1.29.707 one that you have, you'll just have to flash the 1.44 hboot first or the firmware that matches the RUU.
Click to expand...
Click to collapse
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?
Androidian10 said:
Yeah I had a typo.
So yeah, I have both the EXE and ZIP RUU.
I'm thinking that the ZIP RUU has the 1.44 hboot no?
Also, most importantly, can I take official OTA updates while I am S-OFFed?
Click to expand...
Click to collapse
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.
Seanie280672 said:
yes you can take OTA's whilst s-off, do not go s-on at any point.
I would also say try the RUU.zip first.
Click to expand...
Click to collapse
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.
Androidian10 said:
Righto. Will report back again.
I hope the guy at the store doesn't go into the bootloader when I trade my m7 in. Even then I already set the flag to locked so I think he'll miss that S-OFF portion.
Click to expand...
Click to collapse
cid and mid need to match the ruu your flashing first.
Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Already checked with fastboot getvar all.
Seanie280672 said:
cid and mid need to match the ruu your flashing first.
Click to expand...
Click to collapse
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?
Androidian10 said:
Actually, problem. :/
I have a matching CID which is HTC__044 but the modelid is PN0714000.
The RUU's android-info has a matching CID of HTC__044 but a modelid of PN0711000.
What now?
Click to expand...
Click to collapse
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
---------- Post added at 11:05 AM ---------- Previous post was at 10:57 AM ----------
here you go, do this instead, this is going to be a bit backwards and forwards.
Unlock your bootloader, and flash TWRP recovery, then use the mid change tool to change your mid to the correct one.
https://www.androidfilehost.com/?fid=23622183712469376
next copy this guru reset file to your internal storage and flash it, select no to stock radio and no to stock recovery: http://www.htc1guru.com/2013/11/guru-reset-3-63-707-4-stock-rom/
now lock your bootloader
and finally flash the matching firmwqare from here: http://d-h.st/BWu this will put stock recovery and stock radio on your phone.
Seanie280672 said:
unlock your bootloader, flash twrp recovery and change your mid, are you sure your using the RUU for the M7_UL as that looks a lot like the M7_U mid too me, can you give me a link for the RUU's you downloaded please.
Click to expand...
Click to collapse
I actually ran the RUU. It's now stuck on waiting for device after the usual flush after 90 hboot pre-update.
I changed the modelid in the android-info.txt since it was decrypted.
Anyone help me?
My computer can't see the device anymore after flashing the hboot!
Androidian10 said:
Anyone help me?
My computer can't see the device anymore after flashing the hboot!
Click to expand...
Click to collapse
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.
Seanie280672 said:
if your using windows 8 or higher then that's the problem, HBOOT 1.44 doesn't work with it, there is a fix around here somewhere by @clsA but ive never had to use it myself.
trouble with changing the android-info text file is all of the OTA's will fail due to you having the wrong mid on your phone, you'll have to change your phones mid as soon as possible.
Click to expand...
Click to collapse
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?
Androidian10 said:
Ok, I have changed to an old Windows 7 laptop and tried doing the fastboot flash zip again. After I press enter, nothing happens at all. Not a single code at all. Just a blinker.
Edit: Started moving again. Phew. I almost had a heart attack.
So now do I do the fastboot writemid command?
Click to expand...
Click to collapse
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.
Seanie280672 said:
to change the mid you need to use the mid change tool I posted a link to it earlier, install it inside twrp recovery then select the mid you require from the list it gives you.
Click to expand...
Click to collapse
It's okay now. I found a matching mid RUU for my phone.
But my question now is should I go S-ON to remove the red "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings" warning? Or just leave it S-OFF and hope that the techies at the store doesn't notice it?
More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?
Androidian10 said:
More questions
I have done all the OTAs now so should I do the fastboot oem writesecureflag 3 as the final step before putting the phone aside to trade it in?
Click to expand...
Click to collapse
no, leave it s-off, if you turn it back s-on now you will get the tampered flag back.